May 2010 - U-Boot

[U-Boot] [PATCH] ppc4xx: Generic architecture for xilinx ppc405(v3)
by Ricardo Ribalda Delgado 24 Dec '10

24 Dec '10

As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx ppc440 boards, this patch presents a common architecture for all the xilinx ppc405 boards. Any custom xilinx ppc405 board can be added very easily with no code duplicity. This patch also adds a simple generic board, that can be used on almost any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h This patch is prepared to work with the latest version of EDK (10.1) Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda(a)uam.es> --- v2 Includes changes propossed by Stefan Roese -Remove unneeded init.S -PPC404 ->PPC405 v3 rebased to ppc4xx/master CREDITS | 1 + MAINTAINERS | 1 + Makefile | 16 ++ board/xilinx/ppc405-generic/.gitignore | 1 + board/xilinx/ppc405-generic/Makefile | 60 ++++++++ board/xilinx/ppc405-generic/config.mk | 25 ++++ board/xilinx/ppc405-generic/u-boot-ram.lds | 134 ++++++++++++++++++ board/xilinx/ppc405-generic/u-boot-rom.lds | 144 ++++++++++++++++++++ .../xilinx/ppc405-generic/xilinx_ppc405_generic.c | 59 ++++++++ board/xilinx/ppc405-generic/xparameters.h | 36 +++++ cpu/ppc4xx/start.S | 3 +- include/configs/xilinx-ppc405-generic.h | 58 ++++++++ include/configs/xilinx-ppc405.h | 126 +++++++++++++++++ 13 files changed, 663 insertions(+), 1 deletions(-) create mode 100644 board/xilinx/ppc405-generic/.gitignore create mode 100644 board/xilinx/ppc405-generic/Makefile create mode 100644 board/xilinx/ppc405-generic/config.mk create mode 100644 board/xilinx/ppc405-generic/u-boot-ram.lds create mode 100644 board/xilinx/ppc405-generic/u-boot-rom.lds create mode 100644 board/xilinx/ppc405-generic/xilinx_ppc405_generic.c create mode 100644 board/xilinx/ppc405-generic/xparameters.h create mode 100644 include/configs/xilinx-ppc405-generic.h create mode 100644 include/configs/xilinx-ppc405.h diff --git a/CREDITS b/CREDITS index 3767322..9ddf0d2 100644 --- a/CREDITS +++ b/CREDITS @@ -407,6 +407,7 @@ N: Ricardo Ribalda Delgado E: ricardo.ribalda(a)uam.es D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval D: Virtex ppc440 generic architecture +D: Virtex ppc405 generic architecture W: http://www.ii.uam.es/~rribalda N: Stefan Roese diff --git a/MAINTAINERS b/MAINTAINERS index 60cb6a6..a5d1038 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -320,6 +320,7 @@ Ricardo Ribalda <ricardo.ribalda(a)uam.es> ml507 PPC440x5 v5fx30teval PPC440x5 xilinx-pp440-generic PPC440x5 + xilinx-pp405-generic PPC405 Stefan Roese <sr(a)denx.de> diff --git a/Makefile b/Makefile index fceb8a2..66922eb 100644 --- a/Makefile +++ b/Makefile @@ -1518,6 +1518,22 @@ sycamore_config: unconfig WUH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd +xilinx-ppc405-generic_flash_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ + > $(obj)board/xilinx/ppc405-generic/config.tmp + @echo "TEXT_BASE := 0xFE360000" \ + >> $(obj)board/xilinx/ppc405-generic/config.tmp + @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx + +xilinx-ppc405-generic_config: unconfig + @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic + @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ + > $(obj)board/xilinx/ppc405-generic/config.tmp + @echo "TEXT_BASE := 0x04000000" \ + >> $(obj)board/xilinx/ppc405-generic/config.tmp + @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx + xilinx-ppc440-generic_flash_config: unconfig @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ diff --git a/board/xilinx/ppc405-generic/.gitignore b/board/xilinx/ppc405-generic/.gitignore new file mode 100644 index 0000000..b644f59 --- /dev/null +++ b/board/xilinx/ppc405-generic/.gitignore @@ -0,0 +1 @@ +config.tmp diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile new file mode 100644 index 0000000..b56bb49 --- /dev/null +++ b/board/xilinx/ppc405-generic/Makefile @@ -0,0 +1,60 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# (C) Copyright 2008 +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es +# Work supported by Qtechnology http://www.qtec.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +endif + +INCS := +CFLAGS += $(INCS) +HOST_CFLAGS += $(INCS) + +LIB = $(obj)lib$(BOARD).a + +COBJS += ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/xilinx/ppc405-generic/config.mk b/board/xilinx/ppc405-generic/config.mk new file mode 100644 index 0000000..6d76755 --- /dev/null +++ b/board/xilinx/ppc405-generic/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2008 +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es +# Work supported by Qtechnology http://www.qtec.com +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp diff --git a/board/xilinx/ppc405-generic/u-boot-ram.lds b/board/xilinx/ppc405-generic/u-boot-ram.lds new file mode 100644 index 0000000..0004d61 --- /dev/null +++ b/board/xilinx/ppc405-generic/u-boot-ram.lds @@ -0,0 +1,134 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +ENTRY(_start) + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xilinx/ppc405-generic/u-boot-rom.lds b/board/xilinx/ppc405-generic/u-boot-rom.lds new file mode 100644 index 0000000..d2bac9f --- /dev/null +++ b/board/xilinx/ppc405-generic/u-boot-rom.lds @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +ENTRY(_start) + +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c new file mode 100644 index 0000000..9bd1770 --- /dev/null +++ b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <config.h> +#include <common.h> +#include <asm/processor.h> + +ulong __get_PCI_freq(void) +{ + return 0; +} + +ulong get_PCI_freq(void) __attribute__((weak, alias("__get_PCI_freq"))); + +int __board_pre_init(void) +{ + return 0; +} +int board_pre_init(void) __attribute__((weak, alias("__board_pre_init"))); + +int __checkboard(void) +{ + puts("Xilinx PPC405 Generic Board\n"); + return 0; +} +int checkboard(void) __attribute__((weak, alias("__checkboard"))); + +phys_size_t __initdram(int board_type) +{ + return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR, + CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024); +} +phys_size_t initdram(int) __attribute__((weak, alias("__initdram"))); + +void __get_sys_info(sys_info_t *sysInfo) +{ + sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; + sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; + sysInfo->freqPCI = 0; + + return; +} +void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info"))); diff --git a/board/xilinx/ppc405-generic/xparameters.h b/board/xilinx/ppc405-generic/xparameters.h new file mode 100644 index 0000000..e8e8ced --- /dev/null +++ b/board/xilinx/ppc405-generic/xparameters.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * based on xparameters-ml507.h by Xilinx + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef XPARAMETER_H +#define XPARAMETER_H + +#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 +#define XPAR_IIC_EEPROM_BASEADDR 0x81600000 +#define XPAR_INTC_0_BASEADDR 0x81800000 +#define XPAR_SPI_0_BASEADDR 0x83400000 +#define XPAR_UARTLITE_0_BASEADDR 0x84000000 +#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 +#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 +#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 +#define XPAR_UARTLITE_0_BAUDRATE 9600 +#define XPAR_SPI_0_NUM_TRANSFER_BITS 8 + +#endif diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 31902a0..882ef21 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -918,7 +918,8 @@ _start: ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l mtdccr r4 -#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) +#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\ + && !defined (CONFIG_XILINX_405) /*----------------------------------------------------------------------- */ /* Tune the speed and size for flash CS0 */ /*----------------------------------------------------------------------- */ diff --git a/include/configs/xilinx-ppc405-generic.h b/include/configs/xilinx-ppc405-generic.h new file mode 100644 index 0000000..5036c62 --- /dev/null +++ b/include/configs/xilinx-ppc405-generic.h @@ -0,0 +1,58 @@ +/* + * + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * (C) Copyright 2008 + * Georg Schardt <schardt(a)team-ctech.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_GEN_H +#define __CONFIG_GEN_H + +#include "../board/xilinx/ppc405-generic/xparameters.h" + +/* sdram */ +#define CONFIG_SYS_SDRAM_SIZE_MB 256 + +/* environment */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_SYS_ENV_OFFSET 0x3F0000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_ENV_OFFSET) +#define CONFIG_ENV_OVERWRITE 1 + +/*Misc*/ +#define CONFIG_SYS_PROMPT "xlx-ppc405:/# " /* Monitor Command Prompt */ +#define CONFIG_PREBOOT "echo U-Boot is up and runnining;" + +/*Flash*/ +#define CONFIG_SYS_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR +#define CONFIG_SYS_FLASH_SIZE (32*1024*1024) +#define CONFIG_SYS_MAX_FLASH_SECT 71 +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define MTDIDS_DEFAULT "nor0=ppc405-flash" +#define MTDPARTS_DEFAULT "mtdpartsa=ppc405-flash:-(user)" + +#include <configs/xilinx-ppc405.h> +#endif /* __CONFIG_H */ diff --git a/include/configs/xilinx-ppc405.h b/include/configs/xilinx-ppc405.h new file mode 100644 index 0000000..7458470 --- /dev/null +++ b/include/configs/xilinx-ppc405.h @@ -0,0 +1,126 @@ +/* + * + * (C) Copyright 2008 + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda(a)uam.es + * This work has been supported by: QTechnology http://qtec.com/ + * + * (C) Copyright 2008 + * Georg Schardt <schardt(a)team-ctech.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* cpu parameter */ +#define CONFIG_4xx 1 +#define CONFIG_405 1 +#define CONFIG_XILINX_405 1 + +/* memory map */ +#define CONFIG_SYS_SDRAM_BASE 0x0 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (192 * 1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/* u-boot commands configuration */ +#include <config_cmd_default.h> + +/*Misc*/ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* default load address */ +#define CONFIG_SYS_EXTBDINFO 1 /* Extended board_into (bd_t) */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_LOOPW /* enable loopw command */ +#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE /* include version env variable */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + /* Initial Memory map for Linux */ +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_CACHELINE_SHIFT 2 + +/* stack */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */ +#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_FLASH_CF 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_PROTECTION + +/* serial communication */ +#ifdef XPAR_UARTLITE_0_BASEADDR +#define CONFIG_XILINX_UARTLITE +#define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR +#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE +#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } +#else +#ifdef XPAR_UARTNS550_0_BASEADDR +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 4 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 XPAR_UARTNS550_0_BASEADDR +#define CONFIG_SYS_NS16550_CLK XPAR_UARTNS550_0_CLOCK_FREQ_HZ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 115200 } +#endif +#endif + +/* cmd config */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_SPI +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_DTT +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_PING +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_IMLS + +#endif -- 1.5.6.5

4 5

[U-Boot] [STATUS] v2009.08-rc3 is out
by Wolfgang Denk 22 Dec '10

22 Dec '10

Hi everybody... v2009.08-rc3 has just been released. Please help testing, and submit fixes to the remaining problems. Things still missing should be submitted ASAP. * Many boards now throw the (expected) #warning Ethernet driver is deprecated. Please update to use CONFIG_NET_MULTI messages. * ARM, MIPS and PowerPC: mostly compile clean; there are a few issues (mostly harmless) - responsibles have been notified Comments and fixes welcome. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de 'What shall we do?' said Twoflower. 'Panic?' said Rincewind hope- fully. He always held that panic was the best means of survival; back in the olden days, his theory went, people faced with hungry sabre- toothed tigers could be divided very simply in those who panicked and those who stood there saying 'What a magnificent brute!' or 'Here, pussy.' - Terry Pratchett, _The Light Fantastic_

5 10

[U-Boot] [PATCH] s3c44b0/start.S: should clear .bss
by Ender Dai 22 Dec '10

22 Dec '10

.bss section should be zeroed out after relocat to ram. Signed-off-by: Ender Dai <ender.dai(a)gmail.com> --- arch/arm/cpu/s3c44b0/start.S | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index fe6b349..08722c1 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -164,6 +164,15 @@ stack_setup: #endif sub sp, r0, #12 /* leave 3 words for abort-stack */ +clear_bss: + ldr r0, _bss_start /* find start of bss segment */ + ldr r1, _bss_end /* stop here */ + mov r2, #0x00000000 /* clear */ +clbss_l:str r2, [r0] /* clear loop... */ + add r0, r0, #4 + cmp r0, r1 + blt clbss_l + ldr pc, _start_armboot _start_armboot: .word start_armboot -- 1.5.6

2 1

[U-Boot] [PATCH 2/4] s5p6442: Support onenand driver
by Joonyoung Shim 11 Dec '10

11 Dec '10

This patch is for onenand support of s5p6442 SoC. Cc: Minkyu Kang <mk7.kang(a)samsung.com> Cc: Kyungmin Park <kyungmin.park(a)samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim(a)samsung.com> --- drivers/mtd/onenand/samsung.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index f2be687..cbcf83b 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -67,7 +67,7 @@ do { \ #define MAP_01 (0x1 << 24) #define MAP_10 (0x2 << 24) #define MAP_11 (0x3 << 24) -#elif defined(CONFIG_S5PC1XX) +#elif defined(CONFIG_S5PC1XX) || defined(CONFIG_S5P64XX) #define MAP_00 (0x0 << 26) #define MAP_01 (0x1 << 26) #define MAP_10 (0x2 << 26) @@ -121,7 +121,7 @@ static unsigned int s3c_mem_addr(int fba, int fpa, int fsa) { return (fba << 12) | (fpa << 6) | (fsa << 4); } -#elif defined(CONFIG_S5PC1XX) +#elif defined(CONFIG_S5PC1XX) || defined(CONFIG_S5P64XX) static unsigned int s3c_mem_addr(int fba, int fpa, int fsa) { return (fba << 13) | (fpa << 7) | (fsa << 5); @@ -614,7 +614,7 @@ void s3c_onenand_init(struct mtd_info *mtd) #if defined(CONFIG_S3C64XX) onenand->base = (void *)0x70100000; onenand->ahb_addr = (void *)0x20000000; -#elif defined(CONFIG_S5PC1XX) +#elif defined(CONFIG_S5PC1XX) || defined(CONFIG_S5P64XX) onenand->base = (void *)0xE7100000; onenand->ahb_addr = (void *)0xB0000000; #endif -- 1.6.3.3

2 2

[U-Boot] [PATCH v3] POST cleanup v3 (incremental)
by Michael Zaidman 06 Dec '10

06 Dec '10

Incremental patch. Should be applied above its v2: http://lists.denx.de/pipermail/u-boot/2010-April/070729.html (Sorry for inconvenience. I will use --in-reply-to option next time) In the patch: - Fix for hcu4 board; - post.h - preprocessor conditional inclusions optimization. Signed-off-by: Michael Zaidman <michael.zaidman(a)gmail.com> --- include/configs/hcu4.h | 2 +- include/post.h | 18 +++++------------- 2 files changed, 6 insertions(+), 14 deletions(-) diff --git a/include/configs/hcu4.h b/include/configs/hcu4.h index b01f8b1..26992e7 100644 --- a/include/configs/hcu4.h +++ b/include/configs/hcu4.h @@ -72,7 +72,7 @@ #define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) /*----------------------------------------------------------------------- * Serial Port diff --git a/include/post.h b/include/post.h index 296e1d5..939310b 100644 --- a/include/post.h +++ b/include/post.h @@ -35,31 +35,24 @@ #ifdef CONFIG_MPC5xxx #define _POST_WORD_ADDR (MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE) -#endif -#if defined(CONFIG_MPC821) || defined(CONFIG_MPC823) || \ - defined(CONFIG_MPC855) || defined(CONFIG_MPC855T)|| \ - defined(CONFIG_MPC850) || defined(CONFIG_MPC86x) +#elif defined(CONFIG_8xx) #define _POST_WORD_ADDR \ (((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR) -#endif -#ifdef CONFIG_MPC8260 +#elif defined(CONFIG_MPC8260) #include <asm/cpm_8260.h> #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) -#endif -#ifdef CONFIG_MPC8360 +#elif defined(CONFIG_MPC8360) #include <asm/immap_qe.h> #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) -#endif -#ifdef CONFIG_MPC85xx +#elif defined (CONFIG_MPC85xx) #include <asm/cpm_85xx.h> #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) -#endif -#ifdef CONFIG_4xx +#elif defined (CONFIG_4xx) #define _POST_WORD_ADDR \ (CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #endif @@ -67,7 +60,6 @@ #ifndef _POST_WORD_ADDR #error "_POST_WORD_ADDR currently not implemented for this platform!" #endif - #endif /* CONFIG_SYS_POST_WORD_ADDR */ static inline ulong post_word_load (void) -- 1.6.3.3

4 22

[U-Boot] [PATCH] pl01x: use C structs and readl/writel
by Rabin Vincent 30 Nov '10

30 Nov '10

Use C structs for registers, and use readl/writel instead of custom accessors. Acked-by: Michael Brandt <michael.brandt(a)stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent(a)stericsson.com> --- drivers/serial/serial_pl01x.c | 56 ++++++++++++++++++++++------------------ drivers/serial/serial_pl01x.h | 41 ++++++++++++++++-------------- 2 files changed, 53 insertions(+), 44 deletions(-) diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index c645cef..d2609d6 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -29,12 +29,10 @@ #include <common.h> #include <watchdog.h> +#include <asm/io.h> #include "serial_pl01x.h" -#define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val)) -#define IO_READ(addr) (*(volatile unsigned int *)(addr)) - /* * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 * Integrator CP has two UARTs, use the first one, at 38400-8-N-1 @@ -49,16 +47,22 @@ static void pl01x_putc (int portnum, char c); static int pl01x_getc (int portnum); static int pl01x_tstc (int portnum); +static struct pl01x_regs *pl01x_get_regs(int portnum) +{ + return (struct pl01x_regs *) port[portnum]; +} + #ifdef CONFIG_PL010_SERIAL int serial_init (void) { + struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); unsigned int divisor; /* ** First, disable everything. */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, 0x0); + writel(0, &regs->pl010_cr); /* ** Set baud rate @@ -89,20 +93,18 @@ int serial_init (void) divisor = UART_PL010_BAUD_38400; } - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRM, - ((divisor & 0xf00) >> 8)); - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff)); + writel((divisor & 0xf00) >> 8, &regs->pl010_lcrm); + writel(divisor & 0xff, &regs->pl010_lcrl); /* ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRH, - (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN)); + writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, &regs->pl010_lcrh); /* ** Finally, enable the UART */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN)); + writel(UART_PL010_CR_UARTEN, &regs->pl010_cr); return 0; } @@ -113,6 +115,7 @@ int serial_init (void) int serial_init (void) { + struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT); unsigned int temp; unsigned int divider; unsigned int remainder; @@ -121,7 +124,7 @@ int serial_init (void) /* ** First, disable everything. */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0); + writel(0, &regs->pl011_cr); /* ** Set baud rate @@ -135,21 +138,20 @@ int serial_init (void) temp = (8 * remainder) / baudRate; fraction = (temp >> 1) + (temp & 1); - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider); - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction); + writel(divider, &regs->pl011_ibrd); + writel(fraction, &regs->pl011_fbrd); /* ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled. */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH, - (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN)); + writel(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN, + &regs->pl011_lcrh); /* ** Finally, enable the UART */ - IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, - (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | - UART_PL011_CR_RXE)); + writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE, + &regs->pl011_cr); return 0; } @@ -187,28 +189,31 @@ void serial_setbrg (void) static void pl01x_putc (int portnum, char c) { + struct pl01x_regs *regs = pl01x_get_regs(portnum); + /* Wait until there is space in the FIFO */ - while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF) + while (readl(&regs->fr) & UART_PL01x_FR_TXFF) WATCHDOG_RESET(); /* Send the character */ - IO_WRITE (port[portnum] + UART_PL01x_DR, c); + writel(c, &regs->dr); } static int pl01x_getc (int portnum) { + struct pl01x_regs *regs = pl01x_get_regs(portnum); unsigned int data; /* Wait until there is data in the FIFO */ - while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE) + while (readl(&regs->fr) & UART_PL01x_FR_RXFE) WATCHDOG_RESET(); - data = IO_READ (port[portnum] + UART_PL01x_DR); + data = readl(&regs->dr); /* Check for an error flag */ if (data & 0xFFFFFF00) { /* Clear the error */ - IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF); + writel(0xFFFFFFFF, &regs->ecr); return -1; } @@ -217,7 +222,8 @@ static int pl01x_getc (int portnum) static int pl01x_tstc (int portnum) { + struct pl01x_regs *regs = pl01x_get_regs(portnum); + WATCHDOG_RESET(); - return !(IO_READ (port[portnum] + UART_PL01x_FR) & - UART_PL01x_FR_RXFE); + return !(readl(&regs->fr) & UART_PL01x_FR_RXFE); } diff --git a/drivers/serial/serial_pl01x.h b/drivers/serial/serial_pl01x.h index 5f20fdd..b670c24 100644 --- a/drivers/serial/serial_pl01x.h +++ b/drivers/serial/serial_pl01x.h @@ -29,10 +29,28 @@ * Definitions common to both PL010 & PL011 * */ -#define UART_PL01x_DR 0x00 /* Data read or written from the interface. */ -#define UART_PL01x_RSR 0x04 /* Receive status register (Read). */ -#define UART_PL01x_ECR 0x04 /* Error clear register (Write). */ -#define UART_PL01x_FR 0x18 /* Flag register (Read only). */ + +#ifndef __ASSEMBLY__ +/* + * We can use a combined structure for PL010 and PL011, because they overlap + * only in common registers. + */ +struct pl01x_regs { + u32 dr; /* 0x00 Data register */ + u32 ecr; /* 0x04 Error clear register (Write) */ + u32 pl010_lcrh; /* 0x08 Line control register, high byte */ + u32 pl010_lcrm; /* 0x0C Line control register, middle byte */ + u32 pl010_lcrl; /* 0x10 Line control register, low byte */ + u32 pl010_cr; /* 0x14 Control register */ + u32 fr; /* 0x18 Flag register (Read only) */ + u32 reserved; + u32 ilpr; /* 0x20 IrDA low-power counter register */ + u32 pl011_ibrd; /* 0x24 Integer baud rate register */ + u32 pl011_fbrd; /* 0x28 Fractional baud rate register */ + u32 pl011_lcrh; /* 0x2C Line control register */ + u32 pl011_cr; /* 0x30 Control register */ +}; +#endif #define UART_PL01x_RSR_OE 0x08 #define UART_PL01x_RSR_BE 0x04 @@ -50,14 +68,6 @@ * PL010 definitions * */ -#define UART_PL010_LCRH 0x08 /* Line control register, high byte. */ -#define UART_PL010_LCRM 0x0C /* Line control register, middle byte. */ -#define UART_PL010_LCRL 0x10 /* Line control register, low byte. */ -#define UART_PL010_CR 0x14 /* Control register. */ -#define UART_PL010_IIR 0x1C /* Interrupt indentification register (Read). */ -#define UART_PL010_ICR 0x1C /* Interrupt clear register (Write). */ -#define UART_PL010_ILPR 0x20 /* IrDA low power counter register. */ - #define UART_PL010_CR_LPE (1 << 7) #define UART_PL010_CR_RTIE (1 << 6) #define UART_PL010_CR_TIE (1 << 5) @@ -93,13 +103,6 @@ * PL011 definitions * */ -#define UART_PL011_IBRD 0x24 -#define UART_PL011_FBRD 0x28 -#define UART_PL011_LCRH 0x2C -#define UART_PL011_CR 0x30 -#define UART_PL011_IMSC 0x38 -#define UART_PL011_PERIPH_ID0 0xFE0 - #define UART_PL011_LCRH_SPS (1 << 7) #define UART_PL011_LCRH_WLEN_8 (3 << 5) #define UART_PL011_LCRH_WLEN_7 (2 << 5) -- 1.7.0

2 1

[U-Boot] [PATCH] add Xilinx_abort_fn to Xilinx_Spartan3_Slave_Serial_fns
by Wolfgang Wegner 30 Nov '10

30 Nov '10

Currently the hardware was left in an undefined state in case Spartan3 serial load failed. This patch adds Xilinx_abort_fn to give the board a possibility to clean up in this case. Signed-off-by: Wolfgang Wegner <w.wegner(a)astro-kom.de> --- All other FPGA drivers already support such an abort function - it seems Spartan3 serial load was a bit neglected (only discovered this because it messed up things on my board after a failed FPGA load). drivers/fpga/spartan3.c | 6 ++++++ include/spartan3.h | 1 + 2 files changed, 7 insertions(+), 0 deletions(-) diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c index 7a89b56..1dd6f26 100644 --- a/drivers/fpga/spartan3.c +++ b/drivers/fpga/spartan3.c @@ -366,6 +366,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) CONFIG_FPGA_DELAY (); if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to start.\n"); + if (*fn->abort) + (*fn->abort) (cookie); return FPGA_FAIL; } } while (!(*fn->init) (cookie)); @@ -380,6 +382,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) CONFIG_FPGA_DELAY (); if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); + if (*fn->abort) + (*fn->abort) (cookie); return FPGA_FAIL; } } while ((*fn->init) (cookie)); @@ -394,6 +398,8 @@ static int Spartan3_ss_load (Xilinx_desc * desc, void *buf, size_t bsize) while DONE is low (inactive) */ if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) { puts ("** CRC error during FPGA load.\n"); + if (*fn->abort) + (*fn->abort) (cookie); return (FPGA_FAIL); } val = data [bytecount ++]; diff --git a/include/spartan3.h b/include/spartan3.h index d5a589d..0f0b400 100644 --- a/include/spartan3.h +++ b/include/spartan3.h @@ -58,6 +58,7 @@ typedef struct { Xilinx_wr_fn wr; Xilinx_post_fn post; Xilinx_bwr_fn bwr; /* block write function */ + Xilinx_abort_fn abort; } Xilinx_Spartan3_Slave_Serial_fns; /* Device Image Sizes -- 1.5.6.5

2 1

[U-Boot] [PATCH] Added PCI_DEVICE_ID_PLX_9030.
by Horst Kronstorfer 28 Nov '10

28 Nov '10

HOHO! Signed-off-by: Horst Kronstorfer <hkronsto(a)frequentis.com> --- include/pci_ids.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/include/pci_ids.h b/include/pci_ids.h index edfdc1e..e051d7c 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -882,6 +882,7 @@ #define PCI_DEVICE_ID_PLX_SPCOM200 0x1103 #define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151 #define PCI_DEVICE_ID_PLX_R753 0x1152 +#define PCI_DEVICE_ID_PLX_9030 0x9030 #define PCI_DEVICE_ID_PLX_9050 0x9050 #define PCI_DEVICE_ID_PLX_9060 0x9060 #define PCI_DEVICE_ID_PLX_9060ES 0x906E -- 1.7.0.6

2 3

[U-Boot] [PATCH] Remove duplicate #defines in atngw100.h and mimc200.h
by Semih Hazar 28 Nov '10

28 Nov '10

Two configuration include files had duplicate CONFIG_DOS_PARTITION definitions with the same value. This patch does not effect anything, just trims unnecessary text. Signed-off-by: Semih Hazar <semih.hazar(a)indefia.com> --- include/configs/atngw100.h | 2 -- include/configs/mimc200.h | 2 -- 2 files changed, 0 insertions(+), 4 deletions(-) diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 4ed5514..5066448 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -101,8 +101,6 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY -#define CONFIG_DOS_PARTITION 1 - /* * Command line configuration. */ diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index 8ff2f8a..b2cb206 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -104,8 +104,6 @@ #define CONFIG_BOOTP_SUBNETMASK #define CONFIG_BOOTP_GATEWAY -#define CONFIG_DOS_PARTITION 1 - /* * Command line configuration. */ -- 1.5.4.3

2 1

[U-Boot] Hanging in kmalloc of nand_scan_tail() function
by J.Hwan.Kim 15 Nov '10

15 Nov '10

Hi, everyone I'm using U-boot 2009-03. U-boot hangs in nand_init() function. I found the routine kmalloc in nand_scan_tail() cause U-boot reset. int nand_scan_tail(struct mtd_info *mtd) { int i; struct nand_chip *chip = mtd->priv; if (!(chip->options & NAND_OWN_BUFFERS)) { chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL); } if (!chip->buffers) return -ENOMEM; ........ U-boot displays message as follows : NAND: data abort pc : [<31f902b4>]\0x09 lr : [<31fa084c>] sp : 31f5bee0 ip : 00000076\0x09 fp : 00000000 r10: 00001188 r9 : 00020000\0x09 r8 : 31f5bfdc r7 : 00000001 r6 : 00000000\0x09 r5 : 31fa42b8 r4 : 31fa4364 r3 : 31fa052c r2 : 00000064\0x09 r1 : 00000063 r0 : ffffffff Flags: NzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... Where the malloc function is defined? Why the kmalloc() hangs the u-boot? Is there any configuation definition needed? Thanks in advance. Regards, J.Hwan Kim

4 10