October 2010 - U-Boot

[U-Boot] Congatulations! Contact Rev. Dr.Alvan Kurtis
by Joan B. Kroc Foundation 18 Oct '10

18 Oct '10

Dear Beneficiary, The Joan B. Kroc Foundation would like to notify you that you have been chosen by the board of trustees as one of the final recipients of a cash Grant/Donation for your own personal, educational, and business development. The Joan B. Kroc Foundation, established 1963 by the Multi-Million group and now supported by the Economic Community for West African States (ECOWAS), United Nations Organization (UNO) and the European Union (EU) Untied States Government USA was conceived with the objective of human growth, educational, and community development. In conjunction with the ECOWAS, UNO and the EU,US, We are giving out a yearly donation of £600,000.00 (Six hundred thousand great British pounds sterling only) each to 5 lucky recipients selected globally. THE MISSION:Granting Fund and Donation fostering peace, cultivating justice, and creating a safer world.Through education, research, and peacemaking activities, the Joan B. Kroc Institute for Peace & Justice offers programs that advance scholarship and practice in conflict resolution and human rights. The Institute for Peace & Justice at the University of San Diego draws upon Catholic social teaching that sees peace as inseparable from justice and acts to prevent and resolve conflicts that threaten local, national and international peace. “We must not only teach peace, but make peace.”Joan B. Kroc 1st. 2 £600,000.00 pounds each 2nd. 8 £570,000.00 pounds each 3rd. 55 £400,000.00 pounds each 4th. 34 £350,000.00 pounds each 5th. 11 £200,000.00 pounds each These specific Donations/Grants is awarded to only five(5) lucky international recipients worldwide in different categories. Based on the random selection exercise of internet websites and millions of supermarket cash invoices worldwide, you were selected at the second round, the lucky recipients to receive the award sum of £570,000.00 as Grant/Donation. HOW TO CLAIM GRANT: ======================= You are required to email or fax your full Names, and contact information directly to the regional secretary, Joan B. Kroc Foundation Host Headquarters in Abuja, Nigeria. Request your grant application claims form. F5.CONTACT THE SECRETARY FOR MORE INFORMATION ON YOUR CLAIMS AT sec2-joanb(a)w.cn or call Tel: (+234)-703 7556 956, Please endeavor to send a copy of this notification to the regional secretary and also quote your qualification number (JBF-3132-6633-93323) in all discussions. 1. FULL NAMES :..................................... 2. RESIDENTIAL ADDRESS:..................... 3. DATE AND PLACE OF BIRTH:............... 4. PHONE/FAX NUMBERS:....................... 5. SEX:................................................... 6. OCCUPATION:.................................... 7. MARITAL STATUS:............................... 8. WINNING EMAIL:................................ 9. AMOUNT WON:................................... 10. NATIONALITY:................................... 11. NEXT OF KIN..................................... 12. MONTHLY INCOME ........................... CONTACT INFORMATION: ================= Rev. Dr.Alvan Kurtis (Regional Secretary) 12 Foundation road, Garik Abuja,FCT Abuja, Nigeria Email: legalclaims(a)rocketmail.com E-mail: sec-joanb(a)blumail.org Tel: (+234)-812-463-1565 Office Hours Monday~Friday (7.30am~6.30pm) Saturday (9.00am~2.00pm) JOAN B KROC PROFILE http://en.wikipedia.org/wiki/Joan_Kroc http://www.nndb.com/people/894/000112558/ http://www.netglimse.com/celebs/pages/joan_b._kroc/index.shtml http://www.city-data.com/businesses/252391131-joan-b-kroc-theatre-san-diego… Please note that these donations/grants are strictly administered by the EU, ECOWAS, UNO US. You are by all means hereby advised to keep this qualification information confidential until you been able to collect your donation. Note: Anybody under the age of 18 is automatically disqualified. Please note in order to avoid unnecessary delays and complications please remember to quote your reference number and batch numbers in all correspondence. Furthermore, should there be any change of address do inform our agent as soon as possible. Congratulations once more from our members of staff and thank you for being part of our promotional program.On behalf of the board kindly accept our warmest congratulations. Regards, Mrs.Rita Igweh Joan B. Kroc Foundation (Grant/Donation Co-ordinator) Joan B. Kroc Foundation ======================= UNITED KINGDOM OFFICE JOAN B. KROC FOUNDATION REGISTERED IN ENGLAND & WALES (NO. 2826074) 15 HIGH STREET, LONDON, NW8 7NG (UK) UNITED KINGDOM TEL/FAX: +44 (0)704-572-6516 ======================== UNITED STATES OFFICE JOAN B. KROC FOUNDATION USA OFFICE (HEAD OFFICE):- 2435 CALIFORNIA AVE. SEATTLE WASHINGTON 98116 USA. PHONE: +1-206-337-4781 ======================== Copyright © 2008 Joan B. Kroc Foundation All rights reserved

1 0

[U-Boot] [PATCH V3 1/1] MX5: rename mx51 to mx5
by Jason Liu 18 Oct '10

18 Oct '10

Rename mx51 to mx5 in order to support more mx51 like-style SOCs such as MX53 and the followings. Signed-off-by: Jason Liu <r64343(a)freescale.com> --- Changes for v2: Address the comments from Stefano Babic: - rebase - remove CONFIG_CPU_TYPE - remove copyright change - change vision2 board config Changes for v3: Address the comments from Wolfgang Denk: - Change CONFIG_HCLK_FREQ to CONFIG_SYS_MX5_HCLK - Change CONFIG_CLK32 to CONFIG_SYS_MX5_CLK32 - Add "mx5" resp. "MX5" to the new identifier names. --- Signed-off-by: Jason Liu <r64343(a)freescale.com> --- arch/arm/cpu/armv7/{mx51 => mx5}/Makefile | 0 arch/arm/cpu/armv7/{mx51 => mx5}/clock.c | 42 ++++++++++---------- arch/arm/cpu/armv7/{mx51 => mx5}/iomux.c | 2 +- arch/arm/cpu/armv7/{mx51 => mx5}/lowlevel_init.S | 0 arch/arm/cpu/armv7/{mx51 => mx5}/soc.c | 28 ++++++++----- arch/arm/cpu/armv7/{mx51 => mx5}/speed.c | 0 arch/arm/cpu/armv7/{mx51 => mx5}/timer.c | 8 ++-- arch/arm/cpu/armv7/{mx51 => mx5}/u-boot.lds | 0 .../asm/{arch-mx51 => arch-mx5}/asm-offsets.h | 0 .../include/asm/{arch-mx51 => arch-mx5}/clock.h | 0 .../include/asm/{arch-mx51 => arch-mx5}/crm_regs.h | 0 .../include/asm/{arch-mx51 => arch-mx5}/imx-regs.h | 0 .../include/asm/{arch-mx51 => arch-mx5}/iomux.h | 8 ++-- .../mx51_pins.h => arch-mx5/mx5x_pins.h} | 6 +- .../asm/{arch-mx51 => arch-mx5}/sys_proto.h | 4 +- board/freescale/mx51evk/mx51evk.c | 2 +- board/ttcontrol/vision2/vision2.c | 2 +- boards.cfg | 4 +- include/configs/mx51evk.h | 4 +- include/configs/vision2.h | 4 +- 20 files changed, 61 insertions(+), 53 deletions(-) diff --git a/arch/arm/cpu/armv7/mx51/Makefile b/arch/arm/cpu/armv7/mx5/Makefile similarity index 100% rename from arch/arm/cpu/armv7/mx51/Makefile rename to arch/arm/cpu/armv7/mx5/Makefile diff --git a/arch/arm/cpu/armv7/mx51/clock.c b/arch/arm/cpu/armv7/mx5/clock.c similarity index 85% rename from arch/arm/cpu/armv7/mx51/clock.c rename to arch/arm/cpu/armv7/mx5/clock.c index a27227d..00f649c 100644 --- a/arch/arm/cpu/armv7/mx51/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -71,7 +71,7 @@ u32 get_mcu_main_clk(void) reg = (__raw_readl(&mxc_ccm->cacrr) & MXC_CCM_CACRR_ARM_PODF_MASK) >> MXC_CCM_CACRR_ARM_PODF_OFFSET; - freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ); + freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK); return freq / (reg + 1); } @@ -84,14 +84,14 @@ static u32 get_periph_clk(void) reg = __raw_readl(&mxc_ccm->cbcdr); if (!(reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL)) - return decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_MX51_HCLK_FREQ); + return decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK); reg = __raw_readl(&mxc_ccm->cbcmr); switch ((reg & MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK) >> MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET) { case 0: - return decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ); + return decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK); case 1: - return decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_MX51_HCLK_FREQ); + return decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK); default: return 0; } @@ -146,15 +146,15 @@ static u32 get_uart_clk(void) MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET) { case 0x0: freq = decode_pll(mxc_plls[PLL1_CLOCK], - CONFIG_MX51_HCLK_FREQ); + CONFIG_SYS_MX5_HCLK); break; case 0x1: freq = decode_pll(mxc_plls[PLL2_CLOCK], - CONFIG_MX51_HCLK_FREQ); + CONFIG_SYS_MX5_HCLK); break; case 0x2: freq = decode_pll(mxc_plls[PLL3_CLOCK], - CONFIG_MX51_HCLK_FREQ); + CONFIG_SYS_MX5_HCLK); break; default: return 66500000; @@ -181,7 +181,7 @@ u32 get_lp_apm(void) u32 ccsr = __raw_readl(&mxc_ccm->ccsr); if (((ccsr >> 9) & 1) == 0) - ret_val = CONFIG_MX51_HCLK_FREQ; + ret_val = CONFIG_SYS_MX5_HCLK; else ret_val = ((32768 * 1024)); @@ -207,17 +207,17 @@ u32 imx_get_cspiclk(void) switch (clk_sel) { case 0: ret_val = decode_pll(mxc_plls[PLL1_CLOCK], - CONFIG_MX51_HCLK_FREQ) / + CONFIG_SYS_MX5_HCLK) / ((pre_pdf + 1) * (pdf + 1)); break; case 1: ret_val = decode_pll(mxc_plls[PLL2_CLOCK], - CONFIG_MX51_HCLK_FREQ) / + CONFIG_SYS_MX5_HCLK) / ((pre_pdf + 1) * (pdf + 1)); break; case 2: ret_val = decode_pll(mxc_plls[PLL3_CLOCK], - CONFIG_MX51_HCLK_FREQ) / + CONFIG_SYS_MX5_HCLK) / ((pre_pdf + 1) * (pdf + 1)); break; default: @@ -248,7 +248,7 @@ unsigned int mxc_get_clock(enum mxc_clock clk) return imx_get_cspiclk(); case MXC_FEC_CLK: return decode_pll(mxc_plls[PLL1_CLOCK], - CONFIG_MX51_HCLK_FREQ); + CONFIG_SYS_MX5_HCLK); default: break; } @@ -269,16 +269,16 @@ u32 imx_get_fecclk(void) /* * Dump some core clockes. */ -int do_mx51_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { u32 freq; - freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ); - printf("mx51 pll1: %dMHz\n", freq / 1000000); - freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_MX51_HCLK_FREQ); - printf("mx51 pll2: %dMHz\n", freq / 1000000); - freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_MX51_HCLK_FREQ); - printf("mx51 pll3: %dMHz\n", freq / 1000000); + freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK); + printf("pll1: %dMHz\n", freq / 1000000); + freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK); + printf("pll2: %dMHz\n", freq / 1000000); + freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK); + printf("pll3: %dMHz\n", freq / 1000000); printf("ipg clock : %dHz\n", mxc_get_clock(MXC_IPG_CLK)); printf("ipg per clock : %dHz\n", mxc_get_clock(MXC_IPG_PERCLK)); @@ -288,7 +288,7 @@ int do_mx51_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] /***************************************************/ U_BOOT_CMD( - clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx51_showclocks, - "display mx51 clocks\n", + clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx5_showclocks, + "display clocks\n", "" ); diff --git a/arch/arm/cpu/armv7/mx51/iomux.c b/arch/arm/cpu/armv7/mx5/iomux.c similarity index 99% rename from arch/arm/cpu/armv7/mx51/iomux.c rename to arch/arm/cpu/armv7/mx5/iomux.c index 62b2954..e8928d5 100644 --- a/arch/arm/cpu/armv7/mx51/iomux.c +++ b/arch/arm/cpu/armv7/mx5/iomux.c @@ -23,7 +23,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx51_pins.h> +#include <asm/arch/mx5x_pins.h> #include <asm/arch/iomux.h> #include <asm/arch/sys_proto.h> diff --git a/arch/arm/cpu/armv7/mx51/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S similarity index 100% rename from arch/arm/cpu/armv7/mx51/lowlevel_init.S rename to arch/arm/cpu/armv7/mx5/lowlevel_init.S diff --git a/arch/arm/cpu/armv7/mx51/soc.c b/arch/arm/cpu/armv7/mx5/soc.c similarity index 81% rename from arch/arm/cpu/armv7/mx51/soc.c rename to arch/arm/cpu/armv7/mx5/soc.c index f22ebe9..7c7a565 100644 --- a/arch/arm/cpu/armv7/mx51/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -33,28 +33,33 @@ #include <fsl_esdhc.h> #endif +#if defined(CONFIG_MX51) +#define CPU_TYPE 0x51000 +#else +#error "CPU_TYPE not defined" +#endif + u32 get_cpu_rev(void) { - int reg; - int system_rev; + int system_rev = CPU_TYPE; + int reg = __raw_readl(ROM_SI_REV); - reg = __raw_readl(ROM_SI_REV); switch (reg) { case 0x02: - system_rev = 0x51000 | CHIP_REV_1_1; + system_rev |= CHIP_REV_1_1; break; case 0x10: if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0) - system_rev = 0x51000 | CHIP_REV_2_5; + system_rev |= CHIP_REV_2_5; else - system_rev = 0x51000 | CHIP_REV_2_0; + system_rev |= CHIP_REV_2_0; break; case 0x20: - system_rev = 0x51000 | CHIP_REV_3_0; + system_rev |= CHIP_REV_3_0; break; return system_rev; default: - system_rev = 0x51000 | CHIP_REV_1_0; + system_rev |= CHIP_REV_1_0; break; } return system_rev; @@ -67,9 +72,10 @@ int print_cpuinfo(void) u32 cpurev; cpurev = get_cpu_rev(); - printf("CPU: Freescale i.MX51 family rev%d.%d at %d MHz\n", - (cpurev & 0xF0) >> 4, - (cpurev & 0x0F) >> 4, + printf("CPU: Freescale i.MX%x family rev%d.%d at %d MHz\n", + (cpurev & 0xFF000) >> 12, + (cpurev & 0x000F0) >> 4, + (cpurev & 0x0000F) >> 0, mxc_get_clock(MXC_ARM_CLK) / 1000000); return 0; } diff --git a/arch/arm/cpu/armv7/mx51/speed.c b/arch/arm/cpu/armv7/mx5/speed.c similarity index 100% rename from arch/arm/cpu/armv7/mx51/speed.c rename to arch/arm/cpu/armv7/mx5/speed.c diff --git a/arch/arm/cpu/armv7/mx51/timer.c b/arch/arm/cpu/armv7/mx5/timer.c similarity index 92% rename from arch/arm/cpu/armv7/mx51/timer.c rename to arch/arm/cpu/armv7/mx5/timer.c index 110edbf..3044fcf 100644 --- a/arch/arm/cpu/armv7/mx51/timer.c +++ b/arch/arm/cpu/armv7/mx5/timer.c @@ -75,18 +75,18 @@ void reset_timer(void) void reset_timer_masked(void) { ulong val = __raw_readl(&cur_gpt->counter); - lastinc = val / (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ); + lastinc = val / (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ); timestamp = 0; } ulong get_timer_masked(void) { ulong val = __raw_readl(&cur_gpt->counter); - val /= (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ); + val /= (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ); if (val >= lastinc) timestamp += (val - lastinc); else - timestamp += ((0xFFFFFFFF / (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ)) + timestamp += ((0xFFFFFFFF / (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ)) - lastinc) + val; lastinc = val; return timestamp; @@ -106,7 +106,7 @@ void set_timer(ulong t) void __udelay(unsigned long usec) { unsigned long now, start, tmo; - tmo = usec * (CONFIG_MX51_CLK32 / 1000) / 1000; + tmo = usec * (CONFIG_SYS_MX5_CLK32 / 1000) / 1000; if (!tmo) tmo = 1; diff --git a/arch/arm/cpu/armv7/mx51/u-boot.lds b/arch/arm/cpu/armv7/mx5/u-boot.lds similarity index 100% rename from arch/arm/cpu/armv7/mx51/u-boot.lds rename to arch/arm/cpu/armv7/mx5/u-boot.lds diff --git a/arch/arm/include/asm/arch-mx51/asm-offsets.h b/arch/arm/include/asm/arch-mx5/asm-offsets.h similarity index 100% rename from arch/arm/include/asm/arch-mx51/asm-offsets.h rename to arch/arm/include/asm/arch-mx5/asm-offsets.h diff --git a/arch/arm/include/asm/arch-mx51/clock.h b/arch/arm/include/asm/arch-mx5/clock.h similarity index 100% rename from arch/arm/include/asm/arch-mx51/clock.h rename to arch/arm/include/asm/arch-mx5/clock.h diff --git a/arch/arm/include/asm/arch-mx51/crm_regs.h b/arch/arm/include/asm/arch-mx5/crm_regs.h similarity index 100% rename from arch/arm/include/asm/arch-mx51/crm_regs.h rename to arch/arm/include/asm/arch-mx5/crm_regs.h diff --git a/arch/arm/include/asm/arch-mx51/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h similarity index 100% rename from arch/arm/include/asm/arch-mx51/imx-regs.h rename to arch/arm/include/asm/arch-mx5/imx-regs.h diff --git a/arch/arm/include/asm/arch-mx51/iomux.h b/arch/arm/include/asm/arch-mx5/iomux.h similarity index 98% rename from arch/arm/include/asm/arch-mx51/iomux.h rename to arch/arm/include/asm/arch-mx5/iomux.h index a41c387..0d91a24 100644 --- a/arch/arm/include/asm/arch-mx51/iomux.h +++ b/arch/arm/include/asm/arch-mx5/iomux.h @@ -20,13 +20,13 @@ * MA 02111-1307 USA */ -#ifndef __MACH_MX51_IOMUX_H__ -#define __MACH_MX51_IOMUX_H__ +#ifndef __MACH_MX5_IOMUX_H__ +#define __MACH_MX5_IOMUX_H__ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx51_pins.h> +#include <asm/arch/mx5x_pins.h> typedef unsigned int iomux_pin_name_t; @@ -190,4 +190,4 @@ void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config); unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin); void mxc_iomux_set_input(iomux_input_select_t input, u32 config); -#endif /* __MACH_MX51_IOMUX_H__ */ +#endif /* __MACH_MX5_IOMUX_H__ */ diff --git a/arch/arm/include/asm/arch-mx51/mx51_pins.h b/arch/arm/include/asm/arch-mx5/mx5x_pins.h similarity index 99% rename from arch/arm/include/asm/arch-mx51/mx51_pins.h rename to arch/arm/include/asm/arch-mx5/mx5x_pins.h index b44ff25..a564fce 100644 --- a/arch/arm/include/asm/arch-mx51/mx51_pins.h +++ b/arch/arm/include/asm/arch-mx5/mx5x_pins.h @@ -20,8 +20,8 @@ * MA 02111-1307 USA */ -#ifndef __ASM_ARCH_MXC_MX51_PINS_H__ -#define __ASM_ARCH_MXC_MX51_PINS_H__ +#ifndef __ASM_ARCH_MX5_MX5X_PINS_H__ +#define __ASM_ARCH_MX5_MX5X_PINS_H__ #ifndef __ASSEMBLY__ @@ -415,4 +415,4 @@ enum iomux_pins { }; #endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_MXC_MX51_PINS_H__ */ +#endif /* __ASM_ARCH_MX5_MX5X_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx51/sys_proto.h b/arch/arm/include/asm/arch-mx5/sys_proto.h similarity index 93% rename from arch/arm/include/asm/arch-mx51/sys_proto.h rename to arch/arm/include/asm/arch-mx5/sys_proto.h index f687503..83613ab 100644 --- a/arch/arm/include/asm/arch-mx51/sys_proto.h +++ b/arch/arm/include/asm/arch-mx5/sys_proto.h @@ -24,8 +24,10 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -u32 get_cpu_rev(void); #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) +#define is_soc_type(rev)((((get_cpu_rev() & 0xFF00)) >> 8) - rev) + void sdelay(unsigned long); +u32 get_cpu_rev(void); #endif diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 84386e6..c8d7d39 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -23,7 +23,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx51_pins.h> +#include <asm/arch/mx5x_pins.h> #include <asm/arch/iomux.h> #include <asm/errno.h> #include <asm/arch/sys_proto.h> diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index c991ee2..ce4cb78 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -26,7 +26,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx51_pins.h> +#include <asm/arch/mx5x_pins.h> #include <asm/arch/crm_regs.h> #include <asm/arch/iomux.h> #include <mxc_gpio.h> diff --git a/boards.cfg b/boards.cfg index 132d178..9afba88 100644 --- a/boards.cfg +++ b/boards.cfg @@ -46,8 +46,8 @@ pm9263 arm arm926ejs - ronetix at91 jadecpu arm arm926ejs jadecpu syteco mb86r0x suen3 arm arm926ejs km_arm keymile kirkwood rd6281a arm arm926ejs - Marvell kirkwood -mx51evk arm armv7 mx51evk freescale mx51 -vision2 arm armv7 vision2 ttcontrol mx51 +mx51evk arm armv7 mx51evk freescale mx5 +vision2 arm armv7 vision2 ttcontrol mx5 actux1 arm ixp actux2 arm ixp actux3 arm ixp diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 8864f3a..6165473 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -30,8 +30,8 @@ #define CONFIG_MX51 /* in a mx51 */ #define CONFIG_SKIP_RELOCATE_UBOOT -#define CONFIG_MX51_HCLK_FREQ 24000000 /* RedBoot says 26MHz */ -#define CONFIG_MX51_CLK32 32768 +#define CONFIG_SYS_MX5_HCLK 24000000 +#define CONFIG_SYS_MX5_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 44a6f8b..a2ecbe5 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -29,8 +29,8 @@ #define CONFIG_MX51 /* in a mx51 */ #define CONFIG_L2_OFF -#define CONFIG_MX51_HCLK_FREQ 24000000 -#define CONFIG_MX51_CLK32 32768 +#define CONFIG_SYS_MX5_HCLK 24000000 +#define CONFIG_SYS_MX5_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -- 1.7.0.4

1 0

[U-Boot] "Verifying Checksum ... Bad Data CRC" when kernel downloaded through serial or from SD, but ethernet no such error
by Zhao Jihua 18 Oct '10

18 Oct '10

Hi all I can successfully boot my kernel when I download it using the ethernet. But if I download the same kernel through serial COM port or from my on-board micro-SD card to the same DRAM address, this "Bad Data CRC" always pops up: $ bootm 0x80000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Linux-2.6.14.7-tiny1 Created: 2010-10-14 7:19:36 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1499372 Bytes = 1.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image! Any idea about what is going on here? Strange error! Thank you very very much for any help! More info: u-boot version: "git clone git://git.denx.de/u-boot-pxa.git -b openpxa" on 19 May 2010. kernel version: 2.6.14 Microprocessor: Marvell PXA320 Ethernet: DM9000AEP Best regards, Zhao Jihua.

1 0

[U-Boot] Check out my photos!
by Naveen Krishna 18 Oct '10

18 Oct '10

Hi, I set up a profile where I can post photos, connect and share. Do me a favor and confirm our relationship here http://profile.fanbox.com/DeveloperOptin/Introduction.aspx?vet=197&dt=1…. Thanks, Naveen Krishna This message was intended for u-boot(a)lists.denx.de and was sent as a notification, invitation or reminder (digital goods subject to change in reminders) of an event initiated by Naveen Krishna using a third-party or platform application and may contain promotional materials and/or services for sale including digital goods received. To control messages sent to or from you, your contacts and/or FanBox, click here http://profile.fanbox.com/ApplicationManager/CommunityEmailSettings.aspx?em…. Our offices are located at: FanBox - 255 G Street, Ste 723, San Diego, CA 92101

1 0

[U-Boot] [PATCH 1/2] Blackfin: update anomaly lists to latest sheets
by Mike Frysinger 17 Oct '10

17 Oct '10

Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- arch/blackfin/include/asm/mach-bf518/anomaly.h | 2 ++ arch/blackfin/include/asm/mach-bf527/anomaly.h | 4 +++- arch/blackfin/include/asm/mach-bf533/anomaly.h | 7 ++++++- arch/blackfin/include/asm/mach-bf537/anomaly.h | 7 ++++++- arch/blackfin/include/asm/mach-bf538/anomaly.h | 7 +++++-- arch/blackfin/include/asm/mach-bf548/anomaly.h | 7 ++++--- arch/blackfin/include/asm/mach-bf561/anomaly.h | 11 +++++++++-- 7 files changed, 35 insertions(+), 10 deletions(-) diff --git a/arch/blackfin/include/asm/mach-bf518/anomaly.h b/arch/blackfin/include/asm/mach-bf518/anomaly.h index d808b45..24918c5 100644 --- a/arch/blackfin/include/asm/mach-bf518/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf518/anomaly.h @@ -88,6 +88,8 @@ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) diff --git a/arch/blackfin/include/asm/mach-bf527/anomaly.h b/arch/blackfin/include/asm/mach-bf527/anomaly.h index 9358afa..72a6369 100644 --- a/arch/blackfin/include/asm/mach-bf527/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf527/anomaly.h @@ -12,7 +12,7 @@ /* This file should be up to date with: * - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List - * - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision H, 04/29/2010; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -220,6 +220,8 @@ #define ANOMALY_05000483 (1) /* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ #define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3)) +/* The CODEC Zero-Cross Detect Feature is not Functional */ +#define ANOMALY_05000487 (1) /* IFLUSH sucks at life */ #define ANOMALY_05000491 (1) diff --git a/arch/blackfin/include/asm/mach-bf533/anomaly.h b/arch/blackfin/include/asm/mach-bf533/anomaly.h index 78f8721..30e0eba 100644 --- a/arch/blackfin/include/asm/mach-bf533/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf533/anomaly.h @@ -11,7 +11,7 @@ */ /* This file should be up to date with: - * - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List + * - Revision F, 05/25/2010; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -206,6 +206,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) +/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */ +#define ANOMALY_05000471 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) /* Possible Lockup Condition whem Modifying PLL from External Memory */ @@ -357,6 +361,7 @@ #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000440 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) diff --git a/arch/blackfin/include/asm/mach-bf537/anomaly.h b/arch/blackfin/include/asm/mach-bf537/anomaly.h index 43df6af..d3a2966 100644 --- a/arch/blackfin/include/asm/mach-bf537/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf537/anomaly.h @@ -11,7 +11,7 @@ */ /* This file should be up to date with: - * - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List + * - Revision E, 05/25/2010; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -160,12 +160,16 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) /* Possible Lockup Condition whem Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Multiple Simultaneous Urgent DMA Requests May Cause DMA System Instability */ +#define ANOMALY_05000480 (__SILICON_REVISION__ < 3) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) /* IFLUSH sucks at life */ @@ -211,6 +215,7 @@ #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000440 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) diff --git a/arch/blackfin/include/asm/mach-bf538/anomaly.h b/arch/blackfin/include/asm/mach-bf538/anomaly.h index e22d23c..4bc1f4a 100644 --- a/arch/blackfin/include/asm/mach-bf538/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf538/anomaly.h @@ -11,8 +11,8 @@ */ /* This file should be up to date with: - * - Revision H, 07/10/2009; ADSP-BF538/BF538F Blackfin Processor Anomaly List - * - Revision M, 07/10/2009; ADSP-BF539/BF539F Blackfin Processor Anomaly List + * - Revision I, 05/25/2010; ADSP-BF538/BF538F Blackfin Processor Anomaly List + * - Revision N, 05/25/2010; ADSP-BF539/BF539F Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -142,6 +142,8 @@ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -184,6 +186,7 @@ #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000440 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) diff --git a/arch/blackfin/include/asm/mach-bf548/anomaly.h b/arch/blackfin/include/asm/mach-bf548/anomaly.h index 7bda09c..b9f4ecc 100644 --- a/arch/blackfin/include/asm/mach-bf548/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf548/anomaly.h @@ -11,7 +11,7 @@ */ /* This file should be up to date with: - * - Revision I, 07/23/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + * - Revision J, 06/03/2010; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -110,8 +110,6 @@ #define ANOMALY_05000379 (1) /* 8-Bit NAND Flash Boot Mode Not Functional */ #define ANOMALY_05000382 (__SILICON_REVISION__ < 1) -/* Some ATAPI Modes Are Not Functional */ -#define ANOMALY_05000383 (1) /* Boot from OTP Memory Not Functional */ #define ANOMALY_05000385 (__SILICON_REVISION__ < 1) /* bfrom_SysControl() Firmware Routine Not Functional */ @@ -218,6 +216,8 @@ #define ANOMALY_05000481 (1) /* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */ #define ANOMALY_05000483 (1) +/* DDR Trim May Not Be Performed for Certain VLEV Values in OTP Page PBS00L */ +#define ANOMALY_05000484 (__SILICON_REVISION__ < 3) /* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ #define ANOMALY_05000485 (__SILICON_REVISION__ >= 2) /* IFLUSH sucks at life */ @@ -272,6 +272,7 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000440 (0) #define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/include/asm/mach-bf561/anomaly.h b/arch/blackfin/include/asm/mach-bf561/anomaly.h index 4c108c9..9313c27 100644 --- a/arch/blackfin/include/asm/mach-bf561/anomaly.h +++ b/arch/blackfin/include/asm/mach-bf561/anomaly.h @@ -11,7 +11,7 @@ */ /* This file should be up to date with: - * - Revision Q, 11/07/2008; ADSP-BF561 Blackfin Processor Anomaly List + * - Revision R, 05/25/2010; ADSP-BF561 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -286,12 +286,18 @@ #define ANOMALY_05000428 (__SILICON_REVISION__ > 3) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* SCKELOW Feature Is Not Functional */ +#define ANOMALY_05000458 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) +/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */ +#define ANOMALY_05000471 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) /* Possible Lockup Condition whem Modifying PLL from External Memory */ -#define ANOMALY_05000475 (__SILICON_REVISION__ < 4) +#define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ @@ -316,6 +322,7 @@ #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000440 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) -- 1.7.3.1

2 2

[U-Boot] Pull request: u-boot-arm
by Wolfgang Denk 17 Oct '10

17 Oct '10

The following changes since commit e1b4c57096b87b4ada56df4154d9acee6a59141f: Merge branch 'master' of git://git.denx.de/u-boot-arm (2010-10-13 20:59:47 +0200) are available in the git repository at: git://git.denx.de/u-boot-arm.git master Ben Gardiner (7): davinci_nand, trivial : use symbolic ECC start command da850evm : enable NAND even when not in NAND boot mode da850evm: setup the NAND flash timings da850evm: setup NAND support under CONFIG_USE_NAND da850evm: add mtdpart and ubi commands with NAND support da850evm: basic MII EMAC support da850evm: fix linux bootparam address Enric Balletbo i Serra (3): OMAP3: SDRC: Introduce Numonyx DDR type OMAP3: Add support for the IGEP v2 board. OMAP3: Add support for the OMAP3 IGEP module. Loic Minier (1): mx51evk: add u-boot.imx to ALL target Stefano Babic (6): FPGA: add support for downloading Lattice bitstream MX31: Adding missing iomux pin to MX.31 registers MX31: Add support to update FPGA bitstream MX31: add support for setting pin pads MX31: Add support for MXC EHCI controller MX31: Add USB Host support to the QONG board Steve Sakoman (8): env_mmc: Fix crashing bug encountered after enabling ARM relocation ARMV7: OMAP: Use default vendor/product ID for USB gadget ARMV7: OMAP4: Use generic mmc driver on Beagle ARMV7: OMAP4: Use generic mmc driver on Overo ARMV7: OMAP3: Implement relocation for Overo ARMV7: OMAP3: Enable cache support on Overo ARMV7: OMAP3: Fix bug in get_sdr_cs_offset() ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDP Sukumar Ghorai (5): MMC: Fix for capacity calculation on eMMC ARMV7: OMAP: Add new mmc driver compatible with CONFIG_GENERIC_MMC ARMV7: OMAP4: Use generic mmc driver on Panda ARMV7: OMAP4: Use generic mmc driver on SDP4430 ARMV7: OMAP4: Enable saveenv to eMMC for SDP4430 Wolfgang Denk (1): Merge branch 'master' of git://git.denx.de/u-boot-imx MAINTAINERS | 5 + MAKEALL | 2 + arch/arm/cpu/arm1136/mx31/generic.c | 17 + arch/arm/cpu/armv7/omap3/sdrc.c | 2 +- arch/arm/cpu/armv7/omap4/board.c | 5 + arch/arm/include/asm/arch-mx31/mx31-regs.h | 411 +++ arch/arm/include/asm/arch-omap3/mem.h | 43 + arch/arm/include/asm/arch-omap3/mmc_host_def.h | 10 + arch/arm/include/asm/arch-omap4/mmc_host_def.h | 10 + arch/arm/lib/board.c | 10 +- board/davedenx/qong/Makefile | 2 +- board/davedenx/qong/fpga.c | 95 + board/davedenx/qong/qong.c | 44 + board/davedenx/qong/qong_fpga.h | 3 +- board/davinci/da8xxevm/da850evm.c | 89 + board/freescale/mx51evk/config.mk | 1 + board/isee/igep0020/Makefile | 49 + board/isee/igep0020/config.mk | 33 + board/isee/igep0020/igep0020.c | 129 + board/isee/igep0020/igep0020.h | 156 ++ board/isee/igep0030/Makefile | 49 + board/isee/igep0030/config.mk | 34 + board/isee/igep0030/igep0030.c | 71 + board/isee/igep0030/igep0030.h | 147 ++ board/overo/config.mk | 2 +- board/overo/overo.c | 9 + board/ti/beagle/beagle.c | 9 + board/ti/panda/config.mk | 4 +- board/ti/panda/panda.c | 9 + board/ti/sdp4430/config.mk | 3 +- board/ti/sdp4430/sdp.c | 10 + boards.cfg | 2 + common/env_mmc.c | 17 +- drivers/fpga/Makefile | 1 + drivers/fpga/fpga.c | 11 + drivers/fpga/ivm_core.c | 3167 ++++++++++++++++++++++++ drivers/fpga/lattice.c | 399 +++ drivers/mmc/Makefile | 1 + drivers/mmc/mmc.c | 11 + drivers/mmc/omap_hsmmc.c | 415 ++++ drivers/mtd/nand/davinci_nand.c | 3 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-mxc.c | 130 + drivers/video/mx3fb.c | 31 - include/configs/da850evm.h | 54 +- include/configs/igep0020.h | 228 ++ include/configs/igep0030.h | 215 ++ include/configs/omap3_beagle.h | 15 +- include/configs/omap3_overo.h | 14 +- include/configs/omap4_panda.h | 23 +- include/configs/omap4_sdp4430.h | 35 +- include/configs/qong.h | 21 +- include/fpga.h | 1 + include/lattice.h | 319 +++ 54 files changed, 6472 insertions(+), 105 deletions(-) create mode 100644 board/davedenx/qong/fpga.c create mode 100644 board/isee/igep0020/Makefile create mode 100644 board/isee/igep0020/config.mk create mode 100644 board/isee/igep0020/igep0020.c create mode 100644 board/isee/igep0020/igep0020.h create mode 100644 board/isee/igep0030/Makefile create mode 100644 board/isee/igep0030/config.mk create mode 100644 board/isee/igep0030/igep0030.c create mode 100644 board/isee/igep0030/igep0030.h create mode 100755 drivers/fpga/ivm_core.c create mode 100644 drivers/fpga/lattice.c create mode 100644 drivers/mmc/omap_hsmmc.c create mode 100644 drivers/usb/host/ehci-mxc.c create mode 100644 include/configs/igep0020.h create mode 100644 include/configs/igep0030.h create mode 100755 include/lattice.h Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Documentation is like sex: when it is good, it is very, very good; and when it is bad, it is better than nothing. - Dick Brandon

1 1

[U-Boot] Pull request: u-boot-arm
by Wolfgang Denk 17 Oct '10

17 Oct '10

The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864: Merge branch 'master' of git://git.denx.de/u-boot-x86 (2010-10-11 10:00:34 +0200) are available in the git repository at: git://git.denx.de/u-boot-arm.git master Albert Aribaud (6): arm: bugfix: replace ble with blo in start.S files orion5x: fix relocation-incompatible code mvsata_ide: adjust port init sequence orion5x: optimize window size computation mvsata_ide: adjust port init sequence orion5x: optimize window size computation Alexander Stein (1): at91: Add arch_preboot_os which disables PIT in a faster way Andreas Bießmann (6): at91_emac.c: fix 'Warning: eth device name has a space!' at91_emac.c: poll for IDLE when writing PHY at91_emac.h: fix typo in register definition atmel_usart: change register access to C structure arch/arm/include/asm/sizes.h: cleanups board/armltd/integrator/split_by_variant.sh: fix 'echo -n' Ben Gardiner (1): ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOC Heiko Schocher (1): ARM: relocation: fix typo in comment Matt Waddel (2): ARMV7: Versatile Express Coretile CortexA9x4 support ARMV7: Fixed baudrate setting in pl01x driver Prafulla Wadaskar (8): Kirkwood: print_cpuinfo fixed for valid devid revid Kirkwood: dram_init is moved to dram.c kirkwood: added common config file mv-common.h Kirkwood: Changes specific to ARM relocation support Kirkwood: print_cpuinfo fixed for valid devid revid Kirkwood: dram_init is moved to dram.c kirkwood: added common config file mv-common.h Kirkwood: Changes specific to ARM relocation support Reinhard Meyer (1): AT91: convert cpu.c to struct SoC access Stefano Babic (10): Use common function to set GPIOs for MX3 and MX5 ARM: Use syslib functions for all CORTEXA8 MX51: Added pins definition to set up pads MX51: add structure to access System Reset Controller MXC: Add watchdog support to serial driver MX51: Drop unused header file for mx51evk MXC: Correct SPI_CPOL setting in SPI driver MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51 MX51: Register definitions cannot be included in board config file MX51: Support for TTECH vision2 board Wolfgang Denk (3): Merge branch 'master' of git://git.denx.de/u-boot-imx Merge branch 'at91' of git://git.denx.de/u-boot-atmel Merge branch 'master' of git://git.denx.de/u-boot-marvell MAINTAINERS | 5 + MAKEALL | 1 + arch/arm/cpu/arm1136/start.S | 8 +- arch/arm/cpu/arm1176/start.S | 10 +- arch/arm/cpu/arm720t/start.S | 10 +- arch/arm/cpu/arm920t/start.S | 10 +- arch/arm/cpu/arm925t/start.S | 10 +- arch/arm/cpu/arm926ejs/at91/cpu.c | 48 +- arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 34 +- arch/arm/cpu/arm926ejs/kirkwood/dram.c | 38 + arch/arm/cpu/arm926ejs/orion5x/cpu.c | 112 ++-- arch/arm/cpu/arm926ejs/orion5x/timer.c | 6 +- arch/arm/cpu/arm926ejs/start.S | 10 +- arch/arm/cpu/arm946es/start.S | 8 +- arch/arm/cpu/arm_intcm/start.S | 10 +- arch/arm/cpu/armv7/Makefile | 3 +- arch/arm/cpu/armv7/omap-common/Makefile | 1 - arch/arm/cpu/armv7/start.S | 8 +- arch/arm/cpu/armv7/{omap-common => }/syslib.c | 0 arch/arm/cpu/ixp/start.S | 10 +- arch/arm/cpu/lh7a40x/start.S | 11 +- arch/arm/cpu/pxa/start.S | 8 +- arch/arm/cpu/s3c44b0/start.S | 12 +- arch/arm/cpu/sa1100/start.S | 10 +- arch/arm/include/asm/arch-arm925t/sizes.h | 50 -- arch/arm/include/asm/arch-arm926ejs/sizes.h | 51 -- arch/arm/include/asm/arch-armv7/sysctrl.h | 70 ++ .../arm/include/asm/arch-armv7/systimer.h | 54 +- .../arm/include/asm/arch-armv7/wdt.h | 57 +- arch/arm/include/asm/arch-at91/at91_emac.h | 2 +- arch/arm/include/asm/arch-kirkwood/cpu.h | 2 + arch/arm/include/asm/arch-mx31/mx31-regs.h | 14 +- arch/arm/include/asm/arch-mx31/mx31.h | 25 - arch/arm/include/asm/arch-mx51/imx-regs.h | 26 +- arch/arm/include/asm/arch-mx51/mx51_pins.h | 44 ++ arch/arm/include/asm/arch-mx51/sys_proto.h | 1 + arch/arm/include/asm/arch-omap/sizes.h | 52 -- arch/arm/include/asm/arch-omap24xx/omap2420.h | 2 +- arch/arm/include/asm/arch-omap24xx/sizes.h | 49 -- arch/arm/include/asm/arch-orion5x/cpu.h | 1 + arch/arm/include/asm/sizes.h | 5 +- board/Marvell/guruplug/guruplug.c | 11 - board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 11 - board/Marvell/openrd_base/openrd_base.c | 11 - board/Marvell/rd6281a/rd6281a.c | 11 - board/Marvell/sheevaplug/sheevaplug.c | 11 - board/armltd/integrator/split_by_variant.sh | 129 ++-- board/armltd/vexpress/Makefile | 49 ++ board/armltd/vexpress/ca9x4_ct_vxp.c | 220 ++++++ board/armltd/vexpress/config.mk | 23 + board/armltd/vexpress/u-boot.lds | 65 ++ board/davedenx/qong/qong.c | 29 +- board/freescale/mx51evk/mx51evk.c | 2 - board/ttcontrol/vision2/Makefile | 48 ++ board/ttcontrol/vision2/config.mk | 25 + board/ttcontrol/vision2/imximage_hynix.cfg | 209 ++++++ board/ttcontrol/vision2/vision2.c | 711 ++++++++++++++++++++ boards.cfg | 2 + drivers/block/mvsata_ide.c | 42 +- drivers/gpio/Makefile | 2 +- drivers/gpio/{mx31_gpio.c => mxc_gpio.c} | 47 +- drivers/misc/fsl_pmic.c | 10 +- drivers/net/at91_emac.c | 22 +- drivers/serial/atmel_usart.c | 36 +- drivers/serial/atmel_usart.h | 56 +- drivers/serial/serial_mxc.c | 7 +- drivers/serial/serial_pl01x.c | 93 +-- drivers/spi/mxc_spi.c | 168 ++++-- include/configs/ca9x4_ct_vxp.h | 196 ++++++ include/configs/da850evm.h | 1 - include/configs/guruplug.h | 103 +--- include/configs/h2_p2_dbg_board.h | 2 +- include/configs/imx27lite-common.h | 3 +- include/configs/imx31_litekit.h | 4 +- include/configs/imx31_phycore.h | 2 +- include/configs/keymile-common.h | 1 + include/configs/km_arm.h | 2 +- include/configs/mv-common.h | 230 +++++++ include/configs/mv88f6281gtw_ge.h | 120 +--- include/configs/mx31ads.h | 4 +- include/configs/mx31pdk.h | 4 +- include/configs/mx51evk.h | 2 +- include/configs/omap1510.h | 2 +- include/configs/omap3_beagle.h | 3 +- include/configs/omap730.h | 2 +- include/configs/openrd_base.h | 146 +---- include/configs/qong.h | 9 +- include/configs/rd6281a.h | 101 +--- include/configs/sheevaplug.h | 104 +--- include/configs/tx25.h | 3 +- include/configs/vision2.h | 214 ++++++ include/mc13892.h | 3 + .../mx51evk/mx51evk.h => include/mxc_gpio.h | 50 +- 93 files changed, 2904 insertions(+), 1345 deletions(-) rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%) delete mode 100644 arch/arm/include/asm/arch-arm925t/sizes.h delete mode 100644 arch/arm/include/asm/arch-arm926ejs/sizes.h create mode 100644 arch/arm/include/asm/arch-armv7/sysctrl.h copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv7/systimer.h (55%) copy board/freescale/mx51evk/mx51evk.h => arch/arm/include/asm/arch-armv7/wdt.h (55%) delete mode 100644 arch/arm/include/asm/arch-omap/sizes.h delete mode 100644 arch/arm/include/asm/arch-omap24xx/sizes.h create mode 100644 board/armltd/vexpress/Makefile create mode 100644 board/armltd/vexpress/ca9x4_ct_vxp.c create mode 100644 board/armltd/vexpress/config.mk create mode 100644 board/armltd/vexpress/u-boot.lds create mode 100644 board/ttcontrol/vision2/Makefile create mode 100644 board/ttcontrol/vision2/config.mk create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg create mode 100644 board/ttcontrol/vision2/vision2.c rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%) create mode 100644 include/configs/ca9x4_ct_vxp.h create mode 100644 include/configs/mv-common.h create mode 100644 include/configs/vision2.h rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%) Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Making files is easy under the UNIX operating system. Therefore, users tend to create numerous files using large amounts of file space. It has been said that the only standard thing about all UNIX systems is the message-of-the-day telling users to clean up their files. - System V.2 administrator's guide

2 5

[U-Boot] Please Pull u-boot-ti/master
by s-paulraj＠ti.com 17 Oct '10

17 Oct '10

Wolfgang, Please pull u-boot-ti/master Thanks, Sandeep The following changes since commit e79f48393dd919079b34f37957c933f8e75c164d: Lei Wen (1): env_mmc: fix cannot save env issue are available in the git repository at: git://git.denx.de/u-boot-ti.git master Ben Gardiner (7): davinci_nand, trivial : use symbolic ECC start command da850evm : enable NAND even when not in NAND boot mode da850evm: setup the NAND flash timings da850evm: setup NAND support under CONFIG_USE_NAND da850evm: add mtdpart and ubi commands with NAND support da850evm: basic MII EMAC support da850evm: fix linux bootparam address Enric Balletbo i Serra (3): OMAP3: SDRC: Introduce Numonyx DDR type OMAP3: Add support for the IGEP v2 board. OMAP3: Add support for the OMAP3 IGEP module. Steve Sakoman (8): ARMV7: OMAP: Use default vendor/product ID for USB gadget ARMV7: OMAP4: Use generic mmc driver on Beagle ARMV7: OMAP4: Use generic mmc driver on Overo ARMV7: OMAP3: Implement relocation for Overo ARMV7: OMAP3: Enable cache support on Overo ARMV7: OMAP3: Fix bug in get_sdr_cs_offset() ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDP env_mmc: Fix crashing bug encountered after enabling ARM relocation Sukumar Ghorai (5): MMC: Fix for capacity calculation on eMMC ARMV7: OMAP: Add new mmc driver compatible with CONFIG_GENERIC_MMC ARMV7: OMAP4: Use generic mmc driver on Panda ARMV7: OMAP4: Use generic mmc driver on SDP4430 ARMV7: OMAP4: Enable saveenv to eMMC for SDP4430 MAINTAINERS | 5 + MAKEALL | 2 + arch/arm/cpu/armv7/omap3/sdrc.c | 2 +- arch/arm/cpu/armv7/omap4/board.c | 5 + arch/arm/include/asm/arch-omap3/mem.h | 43 +++ arch/arm/include/asm/arch-omap3/mmc_host_def.h | 10 + arch/arm/include/asm/arch-omap4/mmc_host_def.h | 10 + arch/arm/lib/board.c | 10 +- board/davinci/da8xxevm/da850evm.c | 89 +++++ board/isee/igep0020/Makefile | 49 +++ board/isee/igep0020/config.mk | 33 ++ board/isee/igep0020/igep0020.c | 129 ++++++++ board/isee/igep0020/igep0020.h | 156 +++++++++ board/isee/igep0030/Makefile | 49 +++ board/isee/igep0030/config.mk | 34 ++ board/isee/igep0030/igep0030.c | 71 ++++ board/isee/igep0030/igep0030.h | 147 +++++++++ board/overo/config.mk | 2 +- board/overo/overo.c | 9 + board/ti/beagle/beagle.c | 9 + board/ti/panda/config.mk | 4 +- board/ti/panda/panda.c | 9 + board/ti/sdp4430/config.mk | 3 +- board/ti/sdp4430/sdp.c | 10 + boards.cfg | 2 + common/env_mmc.c | 17 +- drivers/mmc/Makefile | 1 + drivers/mmc/mmc.c | 11 + drivers/mmc/omap_hsmmc.c | 415 ++++++++++++++++++++++++ drivers/mtd/nand/davinci_nand.c | 3 +- include/configs/da850evm.h | 54 +++- include/configs/igep0020.h | 228 +++++++++++++ include/configs/igep0030.h | 215 ++++++++++++ include/configs/omap3_beagle.h | 15 +- include/configs/omap3_overo.h | 14 +- include/configs/omap4_panda.h | 23 +- include/configs/omap4_sdp4430.h | 35 +-- 37 files changed, 1853 insertions(+), 70 deletions(-) create mode 100644 board/isee/igep0020/Makefile create mode 100644 board/isee/igep0020/config.mk create mode 100644 board/isee/igep0020/igep0020.c create mode 100644 board/isee/igep0020/igep0020.h create mode 100644 board/isee/igep0030/Makefile create mode 100644 board/isee/igep0030/config.mk create mode 100644 board/isee/igep0030/igep0030.c create mode 100644 board/isee/igep0030/igep0030.h create mode 100644 drivers/mmc/omap_hsmmc.c create mode 100644 include/configs/igep0020.h create mode 100644 include/configs/igep0030.h

2 1

[U-Boot] [GIT PULL] Pull request: u-boot-imx
by Stefano Babic 17 Oct '10

17 Oct '10

Hi Wolfgang, please pull from u-boot-imx The following changes since commit e79f48393dd919079b34f37957c933f8e75c164d: Lei Wen (1): env_mmc: fix cannot save env issue are available in the git repository at: git://git.denx.de/u-boot-imx master Loic Minier (1): mx51evk: add u-boot.imx to ALL target Stefano Babic (6): FPGA: add support for downloading Lattice bitstream MX31: Adding missing iomux pin to MX.31 registers MX31: Add support to update FPGA bitstream MX31: add support for setting pin pads MX31: Add support for MXC EHCI controller MX31: Add USB Host support to the QONG board arch/arm/cpu/arm1136/mx31/generic.c | 17 + arch/arm/include/asm/arch-mx31/mx31-regs.h | 411 ++++ board/davedenx/qong/Makefile | 2 +- board/davedenx/qong/fpga.c | 95 + board/davedenx/qong/qong.c | 44 + board/davedenx/qong/qong_fpga.h | 3 +- board/freescale/mx51evk/config.mk | 1 + drivers/fpga/Makefile | 1 + drivers/fpga/fpga.c | 11 + drivers/fpga/ivm_core.c | 3167 ++++++++++++++++++++++++++++ drivers/fpga/lattice.c | 399 ++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-mxc.c | 130 ++ drivers/video/mx3fb.c | 31 - include/configs/qong.h | 21 +- include/fpga.h | 1 + include/lattice.h | 319 +++ 17 files changed, 4619 insertions(+), 35 deletions(-) create mode 100644 board/davedenx/qong/fpga.c create mode 100755 drivers/fpga/ivm_core.c create mode 100644 drivers/fpga/lattice.c create mode 100644 drivers/usb/host/ehci-mxc.c create mode 100755 include/lattice.h -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office(a)denx.de =====================================================================

2 1

[U-Boot] Pull request u-boot-blackfin.git
by Mike Frysinger 17 Oct '10

17 Oct '10

The following changes since commit e79f48393dd919079b34f37957c933f8e75c164d: env_mmc: fix cannot save env issue (2010-10-13 22:02:32 +0200) are available in the git repository at: git://www.denx.de/git/u-boot-blackfin.git master Mike Frysinger (2): Blackfin: update anomaly lists to latest sheets Blackfin: workaround anomaly 05000440 arch/blackfin/cpu/initcode.c | 6 +++++- arch/blackfin/include/asm/mach-bf518/anomaly.h | 2 ++ arch/blackfin/include/asm/mach-bf527/anomaly.h | 4 +++- arch/blackfin/include/asm/mach-bf533/anomaly.h | 7 ++++++- arch/blackfin/include/asm/mach-bf537/anomaly.h | 7 ++++++- arch/blackfin/include/asm/mach-bf538/anomaly.h | 7 +++++-- arch/blackfin/include/asm/mach-bf548/anomaly.h | 7 ++++--- arch/blackfin/include/asm/mach-bf561/anomaly.h | 11 +++++++++-- 8 files changed, 40 insertions(+), 11 deletions(-)

2 1