August 2009 - U-Boot

[U-Boot] [PATCH] Fix all linker scripts for older binutils versions (pre-2.16)
by Wolfgang Denk 23 Aug '09

23 Aug '09

Commit f62fb99941c6 fixed handling of all rodata sections by using a wildcard combined with calls to ld's builtin functions SORT_BY_ALIGNMENT() and SORT_BY_NAME(). Unfortunately these functions were only introduced with biunutils version 2.16, so the modification broke building with all tool chains using older binutils. This patch makes it work again. This is done by omitting the use of these functions for such old tool chains. This will result in slightly larger target binaries, as the rodata sections are no longer in optimal order alignment-wise which reauls in unused gaps, but the effect was found to be insignificant - especially compared to the fact that you cannot build U-Boot at all in the current state. As ld seems to have no support for conditionals we run the linker script through the C preprocessor which can be easily used to remove the unwanted function calls. Note that the C preprocessor must be run with the "-ansi" (or a "-std=") option to make sure all the system-specific predefined macros outside the reserved namespace are suppressed. Otherise, cpp might for example substitute "powerpc" to "1", thus corrupting for example "OUTPUT_ARCH(powerpc)" etc. Signed-off-by: Wolfgang Denk <wd(a)denx.de> Cc: Mike Frysinger <vapier(a)gentoo.org> --- Compile tested on ARM and PPC, with ELDK 3.1, 3.1.1, 4.1 and 4.2, on ARM both with and without USE_PRIVATE_LIBGCC=yes. I'm not sure if this is to be considered a bug fix (if you have to use an older tool chain, it certainly solves a serious problem of the current code) and should go into the current release, or if we should rather wait with this for the next version. Comments welcome. Mike, I am aware that Blackfin is already using the C preprocessor to generate it's linker scripts. I guess this step can now be folded into this general mechanism. Do you want to provide such a patch, or shall I do it? Makefile | 15 +++++++++++---- board/netstar/Makefile | 9 ++++++--- board/voiceblue/Makefile | 11 +++++++---- config.mk | 12 +++++++++++- nand_spl/board/amcc/acadia/Makefile | 7 +++++-- nand_spl/board/amcc/bamboo/Makefile | 7 +++++-- nand_spl/board/amcc/canyonlands/Makefile | 7 +++++-- nand_spl/board/amcc/kilauea/Makefile | 7 +++++-- nand_spl/board/amcc/sequoia/Makefile | 7 +++++-- nand_spl/board/freescale/mpc8313erdb/Makefile | 7 +++++-- nand_spl/board/freescale/mx31pdk/Makefile | 7 +++++-- nand_spl/board/samsung/smdk6400/Makefile | 7 +++++-- nand_spl/board/sheldon/simpc8313/Makefile | 7 +++++-- onenand_ipl/board/apollon/Makefile | 7 +++++-- 15 files changed, 86 insertions(+), 33 deletions(-) diff --git a/Makefile b/Makefile index 329e0f5..2636ac0 100644 --- a/Makefile +++ b/Makefile @@ -326,11 +326,13 @@ GEN_UBOOT = \ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot -$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) +$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds $(GEN_UBOOT) ifeq ($(CONFIG_KALLSYMS),y) - smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ - $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" -c common/system_map.c -o $(obj)common/system_map.o + smap=`$(call SYSTEM_MAP,u-boot) | \ + awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ + $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \ + -c common/system_map.c -o $(obj)common/system_map.o $(GEN_UBOOT) $(obj)common/system_map.o endif @@ -349,6 +351,9 @@ $(SUBDIRS): depend $(LDSCRIPT): depend $(MAKE) -C $(dir $@) $(notdir $@) +$(obj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + $(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk $(MAKE) -C nand_spl/board/$(BOARDDIR) all @@ -3653,10 +3658,12 @@ clean: $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ $(obj)lib_blackfin/u-boot.lds \ + $(obj)u-boot.lds \ $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h - @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} + @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map} @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} + @rm -f $(obj)onenand_ipl/u-boot.lds @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) @find $(OBJTREE) -type f \ \( -name 'core' -o -name '*.bak' -o -name '*~' \ diff --git a/board/netstar/Makefile b/board/netstar/Makefile index 8f35f93..11578b7 100644 --- a/board/netstar/Makefile +++ b/board/netstar/Makefile @@ -50,8 +50,8 @@ all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin \ $(LIB): $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $^ -$(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o - cd $(lnk) && $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \ +$(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o $(obj)u-boot.lds + cd $(lnk) && $(LD) -T $(obj)u-boot.lds -g -Ttext $(LOAD_ADDR) \ -o $(<:.o=) -e eeprom eeprom.o eeprom_start.o \ -L$(obj)../../examples/standalone -lstubs \ -L$(obj)../../lib_generic -lgeneric \ @@ -78,10 +78,13 @@ $(obj)crcit.o: crcit.c $(obj)crc32.o: $(SRCTREE)/lib_generic/crc32.c $(HOSTCC) $(HOSTCFLAGS) -DUSE_HOSTCC -o $@ -c $< +$(obj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + clean: rm -f $(SOBJS) $(OBJS) $(obj)eeprom $(obj)eeprom.srec \ $(obj)eeprom.bin $(obj)crcek $(obj)crcek.srec \ - $(obj)crcek.bin + $(obj)crcek.bin $(obj)u-boot.lds distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile index 7bb92a6..121c717 100644 --- a/board/voiceblue/Makefile +++ b/board/voiceblue/Makefile @@ -44,8 +44,8 @@ all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin $(LIB): $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -$(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o - cd $(lnk) && $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \ +$(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o $(obj)u-boot.lds + cd $(lnk) && $(LD) -T $(obj)u-boot.lds -g -Ttext $(LOAD_ADDR) \ -o $(<:.o=) -e eeprom eeprom.o eeprom_start.o \ -L$(obj)../../examples/standalone -lstubs \ -L$(obj)../../lib_generic -lgeneric \ @@ -55,11 +55,14 @@ $(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o $(obj)eeprom.bin: $(obj)eeprom.srec $(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null +$(obj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + clean: rm -f $(SOBJS) $(OBJS) $(obj)eeprom \ $(obj)eeprom.srec $(obj)eeprom.bin \ - $(obj)eeprom.o $(obj)eeprom_start.o - + $(obj)eeprom.o $(obj)eeprom_start.o \ + $(obj)u-boot.lds distclean: clean rm -f $(LIB) core *.bak $(obj).depend diff --git a/config.mk b/config.mk index 0c6d1d1..7bc7315 100644 --- a/config.mk +++ b/config.mk @@ -166,11 +166,21 @@ endif AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS) -LDFLAGS += -Bstatic -T $(LDSCRIPT) $(PLATFORM_LDFLAGS) +LDFLAGS += -Bstatic -T $(obj)u-boot.lds $(PLATFORM_LDFLAGS) ifneq ($(TEXT_BASE),) LDFLAGS += -Ttext $(TEXT_BASE) endif +# Special flags for CPP when processing the linker script +# Linker versions prior to 2.16 don't understand the builting +# functions SORT_BY_ALIGNMENT() and SORT_BY_NAME(), so disable these +ifeq ($(shell $(LD) -v | \ + sed -ne 's/GNU ld version $[0-9][0-9]*$\.$[0-9][0-9]*$ .*/[ \1 -lt 2 ] || [ \2 -lt 16 ] \&\& echo old_ld/p' | \ + sh),old_ld) +LDPPFLAGS += -D'SORT_BY_ALIGNMENT(x)=x' -D'SORT_BY_NAME(x)=x' +endif + + # Location of a usable BFD library, where we define "usable" as # "built for ${HOST}, supports ${TARGET}". Sensible values are # - When cross-compiling: the root of the cross-environment diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile index 822f82f..f37425e 100644 --- a/nand_spl/board/amcc/acadia/Makefile +++ b/nand_spl/board/amcc/acadia/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -50,7 +50,7 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl @@ -60,6 +60,9 @@ $(nandobj)System.map: $(nandobj)u-boot-spl grep -v '$compiled$\|$\.o$$$\|$ [aUw] $\|$\.\.ng$$$\|$LASH[RL]DI$' | \ sort > $(nandobj)System.map +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files # from cpu directory diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile index 2932927..5fcf290 100644 --- a/nand_spl/board/amcc/bamboo/Makefile +++ b/nand_spl/board/amcc/bamboo/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -49,11 +49,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files # from cpu directory diff --git a/nand_spl/board/amcc/canyonlands/Makefile b/nand_spl/board/amcc/canyonlands/Makefile index 84b1454..f77e459 100644 --- a/nand_spl/board/amcc/canyonlands/Makefile +++ b/nand_spl/board/amcc/canyonlands/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -54,11 +54,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files # from cpu directory diff --git a/nand_spl/board/amcc/kilauea/Makefile b/nand_spl/board/amcc/kilauea/Makefile index 8a062fe..bc21744 100644 --- a/nand_spl/board/amcc/kilauea/Makefile +++ b/nand_spl/board/amcc/kilauea/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -49,11 +49,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files # from cpu directory diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile index 462005f..54ea7c7 100644 --- a/nand_spl/board/amcc/sequoia/Makefile +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -49,11 +49,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files # from cpu directory diff --git a/nand_spl/board/freescale/mpc8313erdb/Makefile b/nand_spl/board/freescale/mpc8313erdb/Makefile index 1a8f6ff..a13e7e2 100644 --- a/nand_spl/board/freescale/mpc8313erdb/Makefile +++ b/nand_spl/board/freescale/mpc8313erdb/Makefile @@ -29,7 +29,7 @@ PAD_TO := 0xfff04000 include $(TOPDIR)/config.mk LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -54,11 +54,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files $(obj)start.S: diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile index a9572ba..0e13d5d 100644 --- a/nand_spl/board/freescale/mx31pdk/Makefile +++ b/nand_spl/board/freescale/mx31pdk/Makefile @@ -4,7 +4,7 @@ include $(TOPDIR)/config.mk include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL @@ -30,11 +30,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ -Map $(nandobj)u-boot-spl.map \ -o $@ +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + ######################################################################### $(obj)%.o: $(SRCTREE)/cpu/arm1136/%.S diff --git a/nand_spl/board/samsung/smdk6400/Makefile b/nand_spl/board/samsung/smdk6400/Makefile index ae9eb2a..0fdda25 100644 --- a/nand_spl/board/samsung/smdk6400/Makefile +++ b/nand_spl/board/samsung/smdk6400/Makefile @@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -54,11 +54,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files # from cpu directory diff --git a/nand_spl/board/sheldon/simpc8313/Makefile b/nand_spl/board/sheldon/simpc8313/Makefile index 20199c7..6920fe8 100644 --- a/nand_spl/board/sheldon/simpc8313/Makefile +++ b/nand_spl/board/sheldon/simpc8313/Makefile @@ -29,7 +29,7 @@ TEXT_BASE := 0xfff00000 include $(TOPDIR)/config.mk LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL @@ -54,11 +54,14 @@ $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(nandobj)u-boot-spl: $(OBJS) +$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl +$(nandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links for common files $(obj)start.S: diff --git a/onenand_ipl/board/apollon/Makefile b/onenand_ipl/board/apollon/Makefile index 49a8e90..193efff 100644 --- a/onenand_ipl/board/apollon/Makefile +++ b/onenand_ipl/board/apollon/Makefile @@ -3,7 +3,7 @@ include $(TOPDIR)/config.mk include $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/config.mk LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot.onenand.lds -LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +LDFLAGS = -Bstatic -T $(onenandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) AFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL CFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL OBJCFLAGS += --gap-fill=0x00 @@ -34,10 +34,13 @@ $(onenandobj)onenand-ipl-4k.bin: $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin: $(onenandobj)onenand-ipl $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ -$(onenandobj)onenand-ipl: $(OBJS) +$(onenandobj)onenand-ipl: $(OBJS) $(onenandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ -Map $@.map -o $@ +$(onenandobj)u-boot.lds: $(LDSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ + # create symbolic links from common files # from cpu directory -- 1.6.0.6

2 14

[U-Boot] [PATCH] ignore generated u-boot.lds
by Mike Frysinger 23 Aug '09

23 Aug '09

Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- .gitignore | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/.gitignore b/.gitignore index 8ccd42a..67d2cd6 100644 --- a/.gitignore +++ b/.gitignore @@ -27,6 +27,7 @@ /u-boot.ldr /u-boot.ldr.hex /u-boot.ldr.srec +/u-boot.lds /u-boot-onenand.bin /u-boot-flexonenand.bin -- 1.6.4

2 1

[U-Boot] [PATCH] include/mmc.h: Fix typo in IS_SD() macro
by Albin Tonnerre 23 Aug '09

23 Aug '09

Signed-off-by: Albin Tonnerre <albin.tonnerre(a)free-electrons.com> --- include/mmc.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/include/mmc.h b/include/mmc.h index 229d494..2dc69ab 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -47,7 +47,7 @@ #define SD_DATA_4BIT 0x00040000 -#define IS_SD(x) (mmc->version & SD_VERSION_SD) +#define IS_SD(x) (x->version & SD_VERSION_SD) #define MMC_DATA_READ 1 #define MMC_DATA_WRITE 2 -- 1.6.0.4

2 1

[U-Boot] [PATCH] Add support for the DevKit8000 board
by Frederik Kriewitz 23 Aug '09

23 Aug '09

This patch adds support for the DevKit8000 board. Signed-off-by: Frederik Kriewitz <frederik(a)kriewitz.eu> --- mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000) --- --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/devkit8000/Makefile | 52 +++++ board/devkit8000/config.mk | 35 ++++ board/devkit8000/devkit8000.c | 131 +++++++++++++ board/devkit8000/devkit8000.h | 373 ++++++++++++++++++++++++++++++++++++ doc/README.devkit8000 | 15 ++ include/configs/devkit8000.h | 307 +++++++++++++++++++++++++++++ include/configs/omap3_devkit8000.h | 307 +++++++++++++++++++++++++++++ 10 files changed, 1228 insertions(+), 0 deletions(-) create mode 100644 board/devkit8000/Makefile create mode 100644 board/devkit8000/config.mk create mode 100644 board/devkit8000/devkit8000.c create mode 100644 board/devkit8000/devkit8000.h create mode 100644 doc/README.devkit8000 create mode 100644 include/configs/devkit8000.h create mode 100644 include/configs/omap3_devkit8000.h diff --git a/MAINTAINERS b/MAINTAINERS index 620604c..1919505 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -587,6 +587,10 @@ Nishant Kamat <nskamat(a)ti.com> omap1610h2 ARM926EJS +Frederik Kriewitz <frederik(a)kriewitz.eu> + + omap3_devkit8000 ARM CORTEX-A8 (OMAP3530 SoC) + Sergey Kubushyn <ksi(a)koi8.net> DV-EVM ARM926EJS diff --git a/MAKEALL b/MAKEALL index edebaea..ac46ddc 100755 --- a/MAKEALL +++ b/MAKEALL @@ -576,6 +576,7 @@ LIST_ARM11=" \ ######################################################################### LIST_ARM_CORTEX_A8=" \ omap3_beagle \ + omap3_devkit8000 \ omap3_overo \ omap3_evm \ omap3_pandora \ diff --git a/Makefile b/Makefile index 96cca23..a671bfc 100644 --- a/Makefile +++ b/Makefile @@ -3089,6 +3089,9 @@ SMN42_config : unconfig omap3_beagle_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3 +omap3_devkit8000_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 NULL omap3 + omap3_overo_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3 diff --git a/board/devkit8000/Makefile b/board/devkit8000/Makefile new file mode 100644 index 0000000..38600c4 --- /dev/null +++ b/board/devkit8000/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# (C) Copyright 2009 +# Frederik Kriewitz <frederik(a)kriewitz.eu> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := devkit8000.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/devkit8000/config.mk b/board/devkit8000/config.mk new file mode 100644 index 0000000..6bfcef7 --- /dev/null +++ b/board/devkit8000/config.mk @@ -0,0 +1,35 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# (C) Copyright 2009 +# Frederik Kriewitz <frederik(a)kriewitz.eu> +# +# DevKit8000 uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000 diff --git a/board/devkit8000/devkit8000.c b/board/devkit8000/devkit8000.c new file mode 100644 index 0000000..db7d2e2 --- /dev/null +++ b/board/devkit8000/devkit8000.c @@ -0,0 +1,131 @@ +/* + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05(a)gmail.com> + * Shashi Ranjan <shashiranjanmca05(a)gmail.com> + * + * (C) Copyright 2009 + * Frederik Kriewitz <frederik(a)kriewitz.eu> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2(a)ti.com> + * Syed Mohammed Khasim <khasim(a)ti.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <twl4030.h> +#include <asm/io.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> +#include <asm/mach-types.h> +#include "devkit8000.h" +#ifdef CONFIG_DRIVER_DM9000 +#include <net.h> +#include <netdev.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_DEVKIT8000; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/* + * Routine: misc_init_r + * Description: Configure board specific parts + */ +int misc_init_r(void) +{ + struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; +#ifdef CONFIG_DRIVER_DM9000 + uchar enetaddr[6]; + u32 die_id_0; +#endif + + twl4030_power_init(); +#ifdef CONFIG_TWL4030_LED + twl4030_led_init(); +#endif + +#ifdef CONFIG_DRIVER_DM9000 + /* Configure GPMC registers for DM9000 */ + writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[6].config1); + writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[6].config2); + writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[6].config3); + writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[6].config4); + writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[6].config5); + writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[6].config6); + writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[6].config7); + + /* Use OMAP DIE_ID as MAC address */ + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { + printf("ethaddr not set, using Die ID\n"); + die_id_0 = readl(&id_base->die_id_0); + enetaddr[0] = 0x02; /* locally administered */ + enetaddr[1] = readl(&id_base->die_id_1) & 0xff; + enetaddr[2] = (die_id_0 & 0xff000000) >> 24; + enetaddr[3] = (die_id_0 & 0x00ff0000) >> 16; + enetaddr[4] = (die_id_0 & 0x0000ff00) >> 8; + enetaddr[5] = (die_id_0 & 0x000000ff); + eth_setenv_enetaddr("ethaddr", enetaddr); + } +#endif + + dieid_num_r(); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_DEVKIT8000(); +} + +#ifdef CONFIG_DRIVER_DM9000 +/* + * Routine: board_eth_init + * Description: Setting up the Ethernet hardware. + */ +int board_eth_init(bd_t *bis) +{ + return dm9000_initialize(bis); +} +#endif diff --git a/board/devkit8000/devkit8000.h b/board/devkit8000/devkit8000.h new file mode 100644 index 0000000..6fcc75a --- /dev/null +++ b/board/devkit8000/devkit8000.h @@ -0,0 +1,373 @@ +/* + * (C) Copyright 2008 + * Dirk Behme <dirk.behme(a)gmail.com> + * + * (C) Copyright 2009 + * Frederik Kriewitz <frederik(a)kriewitz.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _DEVKIT8000_H_ +#define _DEVKIT8000_H_ + +const omap3_sysinfo sysinfo = { + DDR_STACKED, + "OMAP3 DevKit8000", + "NAND", +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ + +#define MUX_DEVKIT8000() \ + /* SDRC */\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + /* GPMC */\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0 NAND*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS6), (IDIS | PTU | EN | M0)) /*GPMC_nCS6 DM9000*/\ + MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + /* DSS */\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ + /* CAMERA */\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ + /* Audio Interface */\ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ + /* MMC Slot */\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ + /* Expansion Header */\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M4)) /*GPIO_140*/\ + MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M4)) /*GPIO_141*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_142*/\ + MUX_VAL(CP(MCBSP3_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_143*/\ + MUX_VAL(CP(UART2_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_144*/\ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_145*/\ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M4)) /*GPIO_146*/\ + MUX_VAL(CP(UART2_RX), (IDIS | PTD | DIS | M4)) /*GPIO_147*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*GPIO_148*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/ \ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*GPIO_151*/\ + MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*GPIO_152*/\ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*GPIO_153*/\ + MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*GPIO_154*/\ + MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*GPIO_155*/\ + MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*GPIO_160*/\ + MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ + /* Serial Interface */\ + MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | EN | M4)) /*GPIO_163 - LED2*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)) /*GPIO_164 - LED3*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + /* Host USB0 */\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IDIS | PTU | DIS | M4)) /*GPIO_168*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | DIS | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTD | DIS | M4)) /*GPIO_170*/\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M4)) /*GPIO_171*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M4)) /*GPIO_172*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*MCSPI1_SOMI*/\ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | DIS | M0)) /*MCSPI1_CS0*/\ + MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | DIS | M0)) /*MCSPI1_CS1*/\ + MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ + /* USB EHCI (port 2) */\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) /*HSUSB2_DATA2*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) /*HSUSB2_DATA7*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) /*HSUSB2_DATA4*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) /*HSUSB2_DATA5*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)) /*HSUSB2_DATA6*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) /*HSUSB2_DATA3*/\ + /*Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/ \ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | EN | M0)) /*SYS_CLKOUT1*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | EN | M4)) /*GPIO_186 - LED1*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB1_STP*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | EN | M3)) /*HSUSB1_CLK*/\ + MUX_VAL(CP(ETK_D0_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA0*/\ + MUX_VAL(CP(ETK_D1_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA1*/\ + MUX_VAL(CP(ETK_D2_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA2*/\ + MUX_VAL(CP(ETK_D3_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA7*/\ + MUX_VAL(CP(ETK_D4_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA4*/\ + MUX_VAL(CP(ETK_D5_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA5*/\ + MUX_VAL(CP(ETK_D6_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA6*/\ + MUX_VAL(CP(ETK_D7_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA3*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M3)) /*HSUSB1_DIR*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M3)) /*HSUSB1_NXT*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | EN | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11_ES2), (IEN | PTU | EN | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | EN | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | EN | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | EN | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | EN | M4)) /*GPIO_29*/\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*D2D_MCAD1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*D2D_MCAD2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*D2D_MCAD3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*D2D_MCAD4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*D2D_MCAD5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*D2D_MCAD6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*D2D_MCAD7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*D2D_MCAD8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*D2D_MCAD9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*D2D_MCAD10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*D2D_MCAD11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*D2D_MCAD12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*D2D_MCAD13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*D2D_MCAD14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*D2D_MCAD15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*D2D_MCAD16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*D2D_MCAD17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*D2D_MCAD18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*D2D_MCAD19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*D2D_MCAD20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*D2D_MCAD21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*D2D_MCAD22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*D2D_MCAD23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*D2D_MCAD24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*D2D_MCAD25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*D2D_MCAD26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*D2D_MCAD27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*D2D_MCAD28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*D2D_MCAD29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*D2D_MCAD30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*D2D_MCAD31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*D2D_MCAD32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*D2D_MCAD33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*D2D_MCAD34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*D2D_MCAD35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*D2D_MCAD36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*D2D_clk26mi*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*D2D_nrespwron*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*D2D_nreswarm */\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*D2D_arm9nirq */\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*D2D_uma2p6fiq*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*D2D_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*D2D_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*D2D_dmareq0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*D2D_dmareq1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*D2D_dmareq2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*D2D_dmareq3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*D2D_n3gtrst*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*D2D_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*D2D_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*D2D_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*D2D_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*D2D_n3grtck*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*D2D_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*D2D_swakeup*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*D2D_idlereq*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*D2D_idleack*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*D2D_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*D2D_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*D2D_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*D2D_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*D2D_mbusflag*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*D2D_sbusflag*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/ + +#endif diff --git a/doc/README.devkit8000 b/doc/README.devkit8000 new file mode 100644 index 0000000..28e2fdf --- /dev/null +++ b/doc/README.devkit8000 @@ -0,0 +1,15 @@ +DevKit8000 +========== + +The OMAP3 DevKit8000 from Embest/Timll is a clone of the OMAP3 beagle board +with Ethernet and Touch Screen controller on board. + +For more information go to: +http://www.embedinfo.com/English/Product/devkit8000.asp + +There's no real MAC address available. +If ethaddr is not set, 5 Bytes of the OMAP Die ID will be used. + +Build: +make omap3_devkit8000_config +make diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h new file mode 100644 index 0000000..cd40da6 --- /dev/null +++ b/include/configs/devkit8000.h @@ -0,0 +1,307 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2(a)ti.com> + * Syed Mohammed Khasim <x0khasim(a)ti.com> + * + * (C) Copyright 2009 + * Frederik Kriewitz <frederik(a)kriewitz.eu> + * + * Configuration settings for the DevKit8000 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* High Level Configuration Options */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* Display CPU and Board information */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* Size of malloc() pool */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ + +/* Hardware drivers */ + +/* DM9000 */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x2c000000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE + 0x400) +#define CONFIG_DM9000_USE_16BIT 1 +#define CONFIG_DM9000_NO_SROM 1 +#undef CONFIG_DM9000_DEBUG + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +/* select serial console configuration */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +/* MMC */ +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* I2C */ +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* TWL4030 */ +#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_LED 1 + +/* Board NAND Info */ +#define CONFIG_SYS_NO_FLASH /* no NOR flash */ +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:" \ + "512k(x-loader)," \ + "1920k(u-boot)," \ + "128k(u-boot-env)," \ + "4m(kernel)," \ + "-(fs)" + +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ + /* partition */ + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP /* DHCP support */ +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ + +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ + +/* BOOTP/DHCP options */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET +#undef CONFIG_BOOTP_VENDOREX + +/* Environment information */ +#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "vram=12M\0" \ + "dvimode=1024x768MR-16@60\0" \ + "defaultdisplay=dvi\0" \ + "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \ + "kernelopts=rw\0" \ + "commonargs=" \ + "setenv bootargs console=${console} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay}\0" \ + "mmcargs=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk0p2 " \ + "${kernelopts}\0" \ + "nandargs=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=/dev/mtdblock4 " \ + "rootfstype=jffs2 " \ + "${kernelopts}\0" \ + "netargs=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \ + "${kernelopts} " \ + "dnsip1=${dnsip} " \ + "dnsip2=${dnsip2}\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + "netboot=echo Booting from network ...; " \ + "dhcp ${loadaddr}; " \ + "run netargs; " \ + "bootm ${loadaddr}\0" \ + "autoboot=if mmc init 0; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi\0" + + +#define CONFIG_BOOTCOMMAND "run autoboot" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_AUTO_COMPLETE 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "OMAP3 DevKit8000 # " +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 128 /* max number of command args */ + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + 0x01000000) /* 16MB */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* The stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_128M /* at least 128 meg */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/* NAND and environment organization */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define CONFIG_ENV_IS_IN_NAND 1 +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_ENV_OFFSET boot_flash_off + +#ifndef __ASSEMBLY__ +extern struct gpmc *gpmc_cfg; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_devkit8000.h b/include/configs/omap3_devkit8000.h new file mode 100644 index 0000000..cd40da6 --- /dev/null +++ b/include/configs/omap3_devkit8000.h @@ -0,0 +1,307 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2(a)ti.com> + * Syed Mohammed Khasim <x0khasim(a)ti.com> + * + * (C) Copyright 2009 + * Frederik Kriewitz <frederik(a)kriewitz.eu> + * + * Configuration settings for the DevKit8000 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* High Level Configuration Options */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* Display CPU and Board information */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* Size of malloc() pool */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ + +/* Hardware drivers */ + +/* DM9000 */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x2c000000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE + 0x400) +#define CONFIG_DM9000_USE_16BIT 1 +#define CONFIG_DM9000_NO_SROM 1 +#undef CONFIG_DM9000_DEBUG + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +/* select serial console configuration */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +/* MMC */ +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* I2C */ +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* TWL4030 */ +#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_LED 1 + +/* Board NAND Info */ +#define CONFIG_SYS_NO_FLASH /* no NOR flash */ +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:" \ + "512k(x-loader)," \ + "1920k(u-boot)," \ + "128k(u-boot-env)," \ + "4m(kernel)," \ + "-(fs)" + +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ + /* partition */ + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP /* DHCP support */ +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ + +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ + +/* BOOTP/DHCP options */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET +#undef CONFIG_BOOTP_VENDOREX + +/* Environment information */ +#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "vram=12M\0" \ + "dvimode=1024x768MR-16@60\0" \ + "defaultdisplay=dvi\0" \ + "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \ + "kernelopts=rw\0" \ + "commonargs=" \ + "setenv bootargs console=${console} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay}\0" \ + "mmcargs=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk0p2 " \ + "${kernelopts}\0" \ + "nandargs=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=/dev/mtdblock4 " \ + "rootfstype=jffs2 " \ + "${kernelopts}\0" \ + "netargs=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \ + "${kernelopts} " \ + "dnsip1=${dnsip} " \ + "dnsip2=${dnsip2}\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + "netboot=echo Booting from network ...; " \ + "dhcp ${loadaddr}; " \ + "run netargs; " \ + "bootm ${loadaddr}\0" \ + "autoboot=if mmc init 0; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi\0" + + +#define CONFIG_BOOTCOMMAND "run autoboot" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_AUTO_COMPLETE 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "OMAP3 DevKit8000 # " +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 128 /* max number of command args */ + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + 0x01000000) /* 16MB */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* The stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_128M /* at least 128 meg */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/* NAND and environment organization */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define CONFIG_ENV_IS_IN_NAND 1 +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_ENV_OFFSET boot_flash_off + +#ifndef __ASSEMBLY__ +extern struct gpmc *gpmc_cfg; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +#endif /* __CONFIG_H */ -- 1.6.3.3

2 1

[U-Boot] [RFC] Serial API cleanup
by Jean-Christophe PLAGNIOL-VILLARD 23 Aug '09

23 Aug '09

Hi, currenlty we have 3 api for stdio device : stdio_dev, serial_device (multi-serial) and the serial_getc/putc... this cleanup will join them in one api the stdio_dev which will support the multi-serial for before and after relocation this will also pass the current device to the driver to allow it to have base address and other information to simplify the implementation and avoid workarround as done for ns16550 on the omap3 zoom or ppc4xx as example Best Regards, J.

2 6

[U-Boot] [PATCH] start a linker script helper file
by Mike Frysinger 23 Aug '09

23 Aug '09

Start a common header file for common linker script code (such as workarounds for older linkers) rather than doing this in the build system. As fallout, we no longer execute the linker every time config.mk is included by a build file (which can easily be 70+ times), but rather only execute it once. This also fixes a bug in the major version checking by creating a macro to easily compare versions and keep people from making the same common mistake (forgetting to check major and minor together). Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- Makefile | 8 ++++++++ config.mk | 10 ---------- include/u-boot/u-boot.lds.h | 26 ++++++++++++++++++++++++++ 3 files changed, 34 insertions(+), 10 deletions(-) create mode 100644 include/u-boot/u-boot.lds.h diff --git a/Makefile b/Makefile index 96cca23..63d7c97 100644 --- a/Makefile +++ b/Makefile @@ -267,6 +267,14 @@ endif PLATFORM_LIBS += $(PLATFORM_LIBGCC) export PLATFORM_LIBS +# Special flags for CPP when processing the linker script. +# Pass the version down so we can handle backwards compatibility +# on the fly. +LDPPFLAGS += \ + -include $(TOPDIR)/include/u-boot/u-boot.lds.h \ + $(shell $(LD) --version | \ + sed -ne 's/GNU ld version $[0-9][0-9]*$\.$[0-9][0-9]*$.*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') + ifeq ($(CONFIG_NAND_U_BOOT),y) NAND_SPL = nand_spl U_BOOT_NAND = $(obj)u-boot-nand.bin diff --git a/config.mk b/config.mk index 7bc7315..8852157 100644 --- a/config.mk +++ b/config.mk @@ -171,16 +171,6 @@ ifneq ($(TEXT_BASE),) LDFLAGS += -Ttext $(TEXT_BASE) endif -# Special flags for CPP when processing the linker script -# Linker versions prior to 2.16 don't understand the builting -# functions SORT_BY_ALIGNMENT() and SORT_BY_NAME(), so disable these -ifeq ($(shell $(LD) -v | \ - sed -ne 's/GNU ld version $[0-9][0-9]*$\.$[0-9][0-9]*$ .*/[ \1 -lt 2 ] || [ \2 -lt 16 ] \&\& echo old_ld/p' | \ - sh),old_ld) -LDPPFLAGS += -D'SORT_BY_ALIGNMENT(x)=x' -D'SORT_BY_NAME(x)=x' -endif - - # Location of a usable BFD library, where we define "usable" as # "built for ${HOST}, supports ${TARGET}". Sensible values are # - When cross-compiling: the root of the cross-environment diff --git a/include/u-boot/u-boot.lds.h b/include/u-boot/u-boot.lds.h new file mode 100644 index 0000000..b09b887 --- /dev/null +++ b/include/u-boot/u-boot.lds.h @@ -0,0 +1,26 @@ +/* + * Linker script helper macros + * + * Copyright (c) 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __U_BOOT_LDS__ +#define __U_BOOT_LDS__ + +/* See if the linker version is at least the specified version */ +#define LD_AT_LEAST(major, minor) \ + ((major > LD_MAJOR) || (major == LD_MAJOR && minor <= LD_MINOR)) + +/* + * Linker versions prior to 2.16 don't understand the builtin + * functions SORT_BY_ALIGNMENT() and SORT_BY_NAME(), so disable these + */ +#if !LD_AT_LEAST(2, 16) +#error as +# define SORT_BY_ALIGNMENT(x) x +# define SORT_BY_NAME(x) x +#endif + +#endif -- 1.6.4

1 1

[U-Boot] Why u-boot & linux uses different machineid for at91rm9200dk
by vibi sreenivasan 22 Aug '09

22 Aug '09

Hello, Why u-boot & linux uses different machine id for at91rm9200dk. is seems that u-boot is using 0x000000FB & linux is using 0x00000106. Can we fix this in u-boot itself ? Thanks & Regards vibi sreenivasan

3 3

[U-Boot] is -fno-strict-aliasing actually ok?
by Kumar Gala 22 Aug '09

22 Aug '09

Wolfgang, Is it ok for a cpu family to enable -fno-strict-aliasing? We seem to do this on a fair number of the ARM ports and even some of the PPC ones? This seems to hid some of the warnings we get on other cpu family builds (like 85xx). - k board/tqc/tqm5200/Makefile: $(CC) $(CFLAGS) -fno-strict-aliasing - c -o $@ $< cpu/74xx_7xx/config.mk:PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi - fno-strict-aliasing cpu/arm1136/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \ cpu/arm1176/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \ cpu/arm1176/s3c64xx/config.mk:PLATFORM_RELFLAGS += -fno-strict- aliasing -fno-common -ffixed-r8 \ cpu/arm720t/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \ cpu/arm920t/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \ cpu/arm925t/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \ cpu/arm926ejs/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing - fno-common -ffixed-r8 \ cpu/arm926ejs/davinci/config.mk:PLATFORM_RELFLAGS += -fno-strict- aliasing -fno-common -ffixed-r8 \ cpu/arm946es/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \ cpu/arm_cortexa8/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing - fno-common -ffixed-r8 \ cpu/arm_intcm/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing - fno-common -ffixed-r8 \ cpu/ixp/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \ cpu/lh7a40x/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \ cpu/mpc824x/config.mk:PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi - fno-strict-aliasing cpu/mpc8xx/config.mk:PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi - fno-strict-aliasing cpu/ppc4xx/config.mk:PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi - fno-strict-aliasing cpu/pxa/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \ cpu/s3c44b0/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \ cpu/sa1100/config.mk:PLATFORM_RELFLAGS += -fno-strict-aliasing -fno- common -ffixed-r8 \

2 1

[U-Boot] [PATCH v3] Adding support for DevKit8000
by Frederik Kriewitz 22 Aug '09

22 Aug '09

This patch adds support for the DevKit8000 board. Signed-off-by: Frederik Kriewitz <frederik(a)kriewitz.eu> --- mach-types.h needs to be synced (MACH_TYPE_DEVKIT8000) --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/devkit8000/Makefile | 52 ++++++ board/devkit8000/config.mk | 35 ++++ board/devkit8000/devkit8000.c | 127 ++++++++++++++ board/devkit8000/devkit8000.h | 373 +++++++++++++++++++++++++++++++++++++++++ doc/README.devkit8000 | 8 + include/configs/devkit8000.h | 322 +++++++++++++++++++++++++++++++++++ 9 files changed, 925 insertions(+), 0 deletions(-) create mode 100644 board/devkit8000/Makefile create mode 100644 board/devkit8000/config.mk create mode 100644 board/devkit8000/devkit8000.c create mode 100644 board/devkit8000/devkit8000.h create mode 100644 doc/README.devkit8000 create mode 100644 include/configs/devkit8000.h diff --git a/MAINTAINERS b/MAINTAINERS index 620604c..03b2d10 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -706,6 +706,10 @@ Alex Z lart SA1100 dnp1110 SA1110 +Frederik Kriewitz <frederik(a)kriewitz.eu> + + devkit8000 ARM CORTEX-A8 (OMAP3530 SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards: diff --git a/MAKEALL b/MAKEALL index edebaea..34235b7 100755 --- a/MAKEALL +++ b/MAKEALL @@ -581,6 +581,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_pandora \ omap3_zoom1 \ omap3_zoom2 \ + devkit8000 \ " ######################################################################### diff --git a/Makefile b/Makefile index 329e0f5..9e3aa11 100644 --- a/Makefile +++ b/Makefile @@ -3066,6 +3066,9 @@ SMN42_config : unconfig ## ARM CORTEX Systems ######################################################################### +devkit8000_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 NULL omap3 + omap3_beagle_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3 diff --git a/board/devkit8000/Makefile b/board/devkit8000/Makefile new file mode 100644 index 0000000..38600c4 --- /dev/null +++ b/board/devkit8000/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. +# +# (C) Copyright 2009 +# Frederik Kriewitz <frederik(a)kriewitz.eu> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := devkit8000.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/devkit8000/config.mk b/board/devkit8000/config.mk new file mode 100644 index 0000000..6bfcef7 --- /dev/null +++ b/board/devkit8000/config.mk @@ -0,0 +1,35 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# (C) Copyright 2009 +# Frederik Kriewitz <frederik(a)kriewitz.eu> +# +# DevKit8000 uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000 diff --git a/board/devkit8000/devkit8000.c b/board/devkit8000/devkit8000.c new file mode 100644 index 0000000..f9070d0 --- /dev/null +++ b/board/devkit8000/devkit8000.c @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05(a)gmail.com> + * Shashi Ranjan <shashiranjanmca05(a)gmail.com> + * + * (C) Copyright 2009 + * Frederik Kriewitz <frederik(a)kriewitz.eu> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2(a)ti.com> + * Syed Mohammed Khasim <khasim(a)ti.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <twl4030.h> +#include <asm/io.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> +#include <asm/mach-types.h> +#include "devkit8000.h" +#ifdef CONFIG_DRIVER_DM9000 +#include <net.h> +#include <netdev.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_DEVKIT8000; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/* + * Routine: misc_init_r + * Description: Configure board specific parts + */ +int misc_init_r(void) +{ + struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE; +#ifdef CONFIG_DRIVER_DM9000 + uchar enetaddr[6]; + u32 die_id_0; +#endif + + twl4030_power_init(); +#ifdef CONFIG_TWL4030_LED + twl4030_led_init(); +#endif + +#ifdef CONFIG_DRIVER_DM9000 + /* Configure GPMC registers for DM9000 */ + writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[6].config1); + writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[6].config2); + writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[6].config3); + writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[6].config4); + writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[6].config5); + writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[6].config6); + writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[6].config7); + + /* Use OMAP DIE_ID as MAC address */ + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { + printf("ethaddr not set, using Die ID\n"); + die_id_0 = readl(&id_base->die_id_0); + enetaddr[0] = 0x02; /* locally administered */ + enetaddr[1] = readl(&id_base->die_id_1) & 0xff; + enetaddr[2] = (die_id_0 & 0xff000000) >> 24; + enetaddr[3] = (die_id_0 & 0x00ff0000) >> 16; + enetaddr[4] = (die_id_0 & 0x0000ff00) >> 8; + enetaddr[5] = (die_id_0 & 0x000000ff); + eth_setenv_enetaddr("ethaddr", enetaddr); + } +#endif + + dieid_num_r(); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_DEVKIT8000(); +} + +#ifdef CONFIG_DRIVER_DM9000 +int board_eth_init(bd_t *bis) +{ + return dm9000_initialize(bis); +} +#endif diff --git a/board/devkit8000/devkit8000.h b/board/devkit8000/devkit8000.h new file mode 100644 index 0000000..6fcc75a --- /dev/null +++ b/board/devkit8000/devkit8000.h @@ -0,0 +1,373 @@ +/* + * (C) Copyright 2008 + * Dirk Behme <dirk.behme(a)gmail.com> + * + * (C) Copyright 2009 + * Frederik Kriewitz <frederik(a)kriewitz.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _DEVKIT8000_H_ +#define _DEVKIT8000_H_ + +const omap3_sysinfo sysinfo = { + DDR_STACKED, + "OMAP3 DevKit8000", + "NAND", +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ + +#define MUX_DEVKIT8000() \ + /* SDRC */\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + /* GPMC */\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0 NAND*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS6), (IDIS | PTU | EN | M0)) /*GPMC_nCS6 DM9000*/\ + MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ + /* DSS */\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ + /* CAMERA */\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ + /* Audio Interface */\ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ + /* MMC Slot */\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ + /* Expansion Header */\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M4)) /*GPIO_140*/\ + MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M4)) /*GPIO_141*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_142*/\ + MUX_VAL(CP(MCBSP3_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_143*/\ + MUX_VAL(CP(UART2_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_144*/\ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_145*/\ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M4)) /*GPIO_146*/\ + MUX_VAL(CP(UART2_RX), (IDIS | PTD | DIS | M4)) /*GPIO_147*/\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*GPIO_148*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/ \ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*GPIO_151*/\ + MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*GPIO_152*/\ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*GPIO_153*/\ + MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*GPIO_154*/\ + MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*GPIO_155*/\ + MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*GPIO_160*/\ + MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ + /* Serial Interface */\ + MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | EN | M4)) /*GPIO_163 - LED2*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)) /*GPIO_164 - LED3*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + /* Host USB0 */\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IDIS | PTU | DIS | M4)) /*GPIO_168*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | DIS | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTD | DIS | M4)) /*GPIO_170*/\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M4)) /*GPIO_171*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M4)) /*GPIO_172*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*MCSPI1_SOMI*/\ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | DIS | M0)) /*MCSPI1_CS0*/\ + MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | DIS | M0)) /*MCSPI1_CS1*/\ + MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ + /* USB EHCI (port 2) */\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) /*HSUSB2_DATA2*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) /*HSUSB2_DATA7*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) /*HSUSB2_DATA4*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) /*HSUSB2_DATA5*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)) /*HSUSB2_DATA6*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) /*HSUSB2_DATA3*/\ + /*Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/ \ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | EN | M0)) /*SYS_CLKOUT1*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | EN | M4)) /*GPIO_186 - LED1*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB1_STP*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | EN | M3)) /*HSUSB1_CLK*/\ + MUX_VAL(CP(ETK_D0_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA0*/\ + MUX_VAL(CP(ETK_D1_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA1*/\ + MUX_VAL(CP(ETK_D2_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA2*/\ + MUX_VAL(CP(ETK_D3_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA7*/\ + MUX_VAL(CP(ETK_D4_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA4*/\ + MUX_VAL(CP(ETK_D5_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA5*/\ + MUX_VAL(CP(ETK_D6_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA6*/\ + MUX_VAL(CP(ETK_D7_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_DATA3*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M3)) /*HSUSB1_DIR*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M3)) /*HSUSB1_NXT*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | EN | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11_ES2), (IEN | PTU | EN | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | EN | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | EN | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | EN | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | EN | M4)) /*GPIO_29*/\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*D2D_MCAD1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*D2D_MCAD2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*D2D_MCAD3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*D2D_MCAD4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*D2D_MCAD5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*D2D_MCAD6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*D2D_MCAD7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*D2D_MCAD8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*D2D_MCAD9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*D2D_MCAD10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*D2D_MCAD11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*D2D_MCAD12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*D2D_MCAD13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*D2D_MCAD14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*D2D_MCAD15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*D2D_MCAD16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*D2D_MCAD17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*D2D_MCAD18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*D2D_MCAD19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*D2D_MCAD20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*D2D_MCAD21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*D2D_MCAD22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*D2D_MCAD23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*D2D_MCAD24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*D2D_MCAD25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*D2D_MCAD26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*D2D_MCAD27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*D2D_MCAD28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*D2D_MCAD29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*D2D_MCAD30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*D2D_MCAD31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*D2D_MCAD32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*D2D_MCAD33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*D2D_MCAD34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*D2D_MCAD35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*D2D_MCAD36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*D2D_clk26mi*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*D2D_nrespwron*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*D2D_nreswarm */\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*D2D_arm9nirq */\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*D2D_uma2p6fiq*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*D2D_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*D2D_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*D2D_dmareq0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*D2D_dmareq1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*D2D_dmareq2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*D2D_dmareq3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*D2D_n3gtrst*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*D2D_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*D2D_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*D2D_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*D2D_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*D2D_n3grtck*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*D2D_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*D2D_swakeup*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*D2D_idlereq*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*D2D_idleack*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*D2D_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*D2D_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*D2D_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*D2D_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*D2D_mbusflag*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*D2D_sbusflag*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1*/ + +#endif diff --git a/doc/README.devkit8000 b/doc/README.devkit8000 new file mode 100644 index 0000000..671280f --- /dev/null +++ b/doc/README.devkit8000 @@ -0,0 +1,8 @@ +The OMAP3 DevKit8000 from Embest/Timll is a clone of the OMAP3 beagle board +with Ethernet and Touch Screen on board. + +For more information go to: +http://www.embedinfo.com/English/Product/devkit8000.asp + +There's no real MAC address available. +If ethaddr is not set, 5 Bytes of the OMAP Die ID will be used. diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h new file mode 100644 index 0000000..61d7147 --- /dev/null +++ b/include/configs/devkit8000.h @@ -0,0 +1,322 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2(a)ti.com> + * Syed Mohammed Khasim <x0khasim(a)ti.com> + * + * (C) Copyright 2009 + * Frederik Kriewitz <frederik(a)kriewitz.eu> + * + * Configuration settings for the DevKit8000 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +#include <asm/sizes.h> + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* Display CPU and Board information */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* Size of malloc() pool */ +#define CONFIG_ENV_SIZE SZ_128K /* Total Size Environment */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */ + /* initial data */ + +#define CONFIG_SYS_NO_FLASH /* no NOR flash */ + +/* Hardware drivers */ + +/* DM9000 */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_BASE 0x2c000000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE + 0x400) +#define CONFIG_DM9000_USE_16BIT 1 +#define CONFIG_DM9000_NO_SROM 1 +#undef CONFIG_DM9000_DEBUG + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +/* select serial console configuration */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +/* MMC */ +#define CONFIG_MMC 1 +#define CONFIG_OMAP3_MMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP /* DHCP support */ +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */ + +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ + +/* I2C */ +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 + +/* TWL4030 */ +#define CONFIG_TWL4030_POWER 1 +#define CONFIG_TWL4030_LED 1 + +/* Board NAND Info */ +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:" \ + "512k(x-loader)," \ + "1920k(u-boot)," \ + "128k(u-boot-env)," \ + "4m(kernel)," \ + "-(fs)" + +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ + /* partition */ + +/* BOOTP/DHCP options */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET +#undef CONFIG_BOOTP_VENDOREX + +/* Environment information */ +#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */ + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyS2,115200n8\0" \ + "vram=12M\0" \ + "dvimode=1024x768MR-16@60\0" \ + "defaultdisplay=dvi\0" \ + "nfsopts=hard,tcp,rsize=65536,wsize=65536\0" \ + "kernelopts=rw\0" \ + "commonargs=" \ + "setenv bootargs console=${console} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay}\0" \ + "mmcargs=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk0p2 " \ + "${kernelopts}\0" \ + "nandargs=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=/dev/mtdblock4 " \ + "rootfstype=jffs2 " \ + "${kernelopts}\0" \ + "netargs=" \ + "run commonargs; " \ + "setenv bootargs ${bootargs} " \ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off " \ + "${kernelopts} " \ + "dnsip1=${dnsip} " \ + "dnsip2=${dnsip2}\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 280000 400000; " \ + "bootm ${loadaddr}\0" \ + "netboot=echo Booting from network ...; " \ + "dhcp ${loadaddr}; " \ + "run netargs; " \ + "bootm ${loadaddr}\0" \ + "autoboot=if mmc init 0; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi\0" + + +#define CONFIG_BOOTCOMMAND "run autoboot" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_AUTO_COMPLETE 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "OMAP3 DevKit8000 # " +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 128 /* max number of command args */ + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x07000000) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ + 0x01000000) /* 16MB */ + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_128M /* at least 128 meg */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M + +#define CONFIG_SYS_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define CONFIG_ENV_IS_IN_NAND 1 +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_ENV_OFFSET boot_flash_off + +#ifndef __ASSEMBLY__ +extern struct gpmc *gpmc_cfg; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +#endif /* __CONFIG_H */ -- 1.6.3.3

6 15

[U-Boot] [PATCH 1/2] Blackfin: cm-bf527/cm-bf537: increase flash sectors
by Mike Frysinger 22 Aug '09

22 Aug '09

From: Harald Krapfenbauer <Harald.Krapfenbauer(a)bluetechnix.at> Newer revisions of these boards have slightly larger flashes, so increase the configured number of sectors so that U-Boot works on all revisions. Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer(a)bluetechnix.at> Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> --- include/configs/cm-bf527.h | 2 +- include/configs/cm-bf537e.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 79d06fb..1592719 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -95,7 +95,7 @@ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 64 +#define CONFIG_SYS_MAX_FLASH_SECT 67 /* diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 021b631..34d4299 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -79,7 +79,7 @@ #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 32 +#define CONFIG_SYS_MAX_FLASH_SECT 35 /* -- 1.6.4

1 1