According to the doc/feature-removal-schedule.txt, the "autoscr"
command will be replaced by the "source" command in approximately 6
months from now.
This patch prepares this change and starts a 6 month transition
period as follows:
- The new "source" command has been added, which implements exactly
the same functionlaity as the old "autoscr" command before
- The old "autoscr" command name is kept as an alias for compatibility
- Command sequences, script files atc. have been adapted to use the
new "source" command
- Related environment variables ("autoscript", "autoscript_uname")
have *not* been adapted yet; these will be renamed resp. removed in
a separate patch when the support for the "autoscr" command get's
finally dropped.
Signed-off-by: Wolfgang Denk <wd(a)denx.de>
---
Changes since V1:
- add DEPRECATED warning message to "autoscr" help text.
- Print DEPRECATED warning message whenever "autoscr" command gets
used.
README | 10 +-
board/cray/L1/L1.c | 2 +-
board/cray/L1/bootscript.hush | 2 +-
board/esd/common/cmd_loadpci.c | 6 +-
board/pn62/cmd_pn62.c | 7 +-
common/Makefile | 4 +-
common/cmd_autoscript.c | 241 -----------------------------------
common/cmd_load.c | 7 +-
common/cmd_net.c | 7 +-
common/cmd_source.c | 256 ++++++++++++++++++++++++++++++++++++++
doc/feature-removal-schedule.txt | 20 ++-
include/common.h | 4 +-
include/config_cmd_all.h | 2 +-
include/config_cmd_default.h | 2 +-
include/configs/APC405.h | 14 +-
include/configs/CRAYL1.h | 26 ++--
include/configs/DU440.h | 12 +-
include/configs/EP1C20.h | 2 +-
include/configs/GEN860T.h | 2 +-
include/configs/MVBC_P.h | 12 +-
include/configs/MVBLM7.h | 12 +-
include/configs/NETPHONE.h | 2 +-
include/configs/NETTA2.h | 2 +-
include/configs/NX823.h | 4 +-
include/configs/PN62.h | 6 +-
include/configs/TOP860.h | 8 +-
include/configs/TQM5200.h | 2 +-
include/configs/VoVPN-GW.h | 4 +-
include/configs/afeb9260.h | 6 +-
include/configs/apollon.h | 2 +-
include/configs/at91cap9adk.h | 4 +-
include/configs/at91sam9260ek.h | 6 +-
include/configs/at91sam9261ek.h | 6 +-
include/configs/at91sam9263ek.h | 6 +-
include/configs/at91sam9rlek.h | 6 +-
include/configs/atngw100.h | 2 +-
include/configs/atstk1002.h | 2 +-
include/configs/atstk1006.h | 2 +-
include/configs/eNET.h | 6 +-
include/configs/favr-32-ezkit.h | 2 +-
include/configs/grsim.h | 26 ++--
include/configs/grsim_leon2.h | 22 ++--
include/configs/gth2.h | 14 +-
include/configs/keymile-common.h | 2 +-
include/configs/lwmon.h | 4 +-
include/configs/lwmon5.h | 2 +-
include/configs/mp2usb.h | 4 +-
include/configs/mx1fs2.h | 6 +-
include/configs/omap2420h4.h | 2 +-
include/configs/omap3_beagle.h | 2 +-
include/configs/omap3_evm.h | 2 +-
include/configs/omap3_overo.h | 2 +-
include/configs/omap3_pandora.h | 2 +-
include/configs/omap3_zoom1.h | 2 +-
include/configs/sc3.h | 24 ++--
include/configs/scb9328.h | 4 +-
include/configs/stxxtc.h | 2 +-
include/configs/vct.h | 38 +++---
include/configs/wepep250.h | 6 +-
59 files changed, 458 insertions(+), 436 deletions(-)
delete mode 100644 common/cmd_autoscript.c
create mode 100644 common/cmd_source.c
diff --git a/README b/README
index 32d9acd..fcc4d7c 100644
--- a/README
+++ b/README
@@ -593,7 +593,6 @@ The following options need to be configured:
except those marked below with a "*".
CONFIG_CMD_ASKENV * ask for env variable
- CONFIG_CMD_AUTOSCRIPT Autoscript Support
CONFIG_CMD_BDI bdinfo
CONFIG_CMD_BEDBUG * Include BedBug Debugger
CONFIG_CMD_BMP * BMP support
@@ -654,6 +653,7 @@ The following options need to be configured:
(requires CONFIG_CMD_I2C)
CONFIG_CMD_SETGETDCR Support for DCR Register access
(4xx only)
+ CONFIG_CMD_SOURCE "source" command Support
CONFIG_CMD_SPI * SPI serial bus support
CONFIG_CMD_USB * USB support
CONFIG_CMD_VFD * VFD support (TRAB)
@@ -1789,7 +1789,7 @@ The following options need to be configured:
Note: overly (ab)use of the default environment is
discouraged. Make sure to check other ways to preset
- the environment like the autoscript function or the
+ the environment like the "source" command or the
boot command first.
- DataFlash Support:
@@ -1948,8 +1948,8 @@ Legacy uImage format:
81 common/cmd_net.c NetLoop() back without error
-82 common/cmd_net.c size == 0 (File with size 0 loaded)
82 common/cmd_net.c trying automatic boot
- 83 common/cmd_net.c running autoscript
- -83 common/cmd_net.c some error in automatic boot or autoscript
+ 83 common/cmd_net.c running "source" command
+ -83 common/cmd_net.c some error in automatic boot or "source" command
84 common/cmd_net.c end without errors
FIT uImage format:
@@ -2952,7 +2952,7 @@ Some configuration options can be set using Environment Variables:
autoscript - if set to "yes" commands like "loadb", "loady",
"bootp", "tftpb", "rarpboot" and "nfs" will attempt
to automatically run script images (by internally
- calling "autoscript").
+ calling "source").
autoscript_uname - if script image is in a format (FIT) this
variable is used to get script subimage unit name.
diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c
index 1c82bdf..8a06ecc 100644
--- a/board/cray/L1/L1.c
+++ b/board/cray/L1/L1.c
@@ -164,7 +164,7 @@ int misc_init_r (void)
setenv ("ethaddr", e);
}
}
- sprintf (bootcmd,"autoscript %X",(unsigned)bootscript);
+ sprintf (bootcmd,"source %X",(unsigned)bootscript);
setenv ("bootcmd", bootcmd);
return (0);
}
diff --git a/board/cray/L1/bootscript.hush b/board/cray/L1/bootscript.hush
index ec4839b..f2f78ad 100644
--- a/board/cray/L1/bootscript.hush
+++ b/board/cray/L1/bootscript.hush
@@ -31,7 +31,7 @@ if printenv bootscript
tftp $tftp_addr $bootcript
if imi $tftp_addr
then
- autoscript $tftp_addr
+ source $tftp_addr
fi
fi
diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c
index 0a6626e..c779f79 100644
--- a/board/esd/common/cmd_loadpci.c
+++ b/board/esd/common/cmd_loadpci.c
@@ -30,7 +30,7 @@
#if defined(CONFIG_CMD_BSP)
extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
-extern int do_autoscript (cmd_tbl_t *, int, int, char *[]);
+extern int do_source (cmd_tbl_t *, int, int, char *[]);
#define ADDRMASK 0xfffff000
@@ -98,12 +98,12 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
case 1:
/*
- * Boot image via autoscr
+ * Boot image via "source" command
*/
printf("executing script at addr 0x%s ...\n", addr);
local_args[0] = addr;
local_args[1] = NULL;
- do_autoscript(cmdtp, 0, 1, local_args);
+ do_source(cmdtp, 0, 1, local_args);
break;
case 2:
diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c
index 10d0df6..b9f3bdb 100644
--- a/board/pn62/cmd_pn62.c
+++ b/board/pn62/cmd_pn62.c
@@ -152,12 +152,13 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
rcode = do_bootm (cmdtp, 0, 1, local_args);
}
-#ifdef CONFIG_AUTOSCRIPT
+#ifdef CONFIG_SOURCE
if (load_addr) {
char *s;
if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
- printf ("Running autoscript at addr 0x%08lX", load_addr);
+ printf ("Running "source" command at addr 0x%08lX",
+ load_addr);
s = getenv ("autoscript_uname");
if (s)
@@ -165,7 +166,7 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
puts (" ...\n");
- rcode = autoscript (load_addr, s);
+ rcode = source (load_addr, s);
}
}
#endif
diff --git a/common/Makefile b/common/Makefile
index 23171ca..eb8e283 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -61,8 +61,8 @@ COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
# command
COBJS-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
-COBJS-$(CONFIG_AUTOSCRIPT) += cmd_autoscript.o
-COBJS-$(CONFIG_CMD_AUTOSCRIPT) += cmd_autoscript.o
+COBJS-$(CONFIG_SOURCE) += cmd_source.o
+COBJS-$(CONFIG_CMD_SOURCE) += cmd_source.o
COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
COBJS-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o
COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o
diff --git a/common/cmd_autoscript.c b/common/cmd_autoscript.c
deleted file mode 100644
index e5a9bc0..0000000
--- a/common/cmd_autoscript.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, kharris(a)nexus-tech.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * autoscript allows a remote host to download a command file and,
- * optionally, binary data for automatically updating the target. For
- * example, you create a new kernel image and want the user to be
- * able to simply download the image and the machine does the rest.
- * The kernel image is postprocessed with mkimage, which creates an
- * image with a script file prepended. If enabled, autoscript will
- * verify the script and contents of the download and execute the
- * script portion. This would be responsible for erasing flash,
- * copying the new image, and rebooting the machine.
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <command.h>
-#include <image.h>
-#include <malloc.h>
-#include <asm/byteorder.h>
-#if defined(CONFIG_8xx)
-#include <mpc8xx.h>
-#endif
-#ifdef CONFIG_SYS_HUSH_PARSER
-#include <hush.h>
-#endif
-
-int
-autoscript (ulong addr, const char *fit_uname)
-{
- ulong len;
- image_header_t *hdr;
- ulong *data;
- char *cmd;
- int rcode = 0;
- int verify;
-#if defined(CONFIG_FIT)
- const void* fit_hdr;
- int noffset;
- const void *fit_data;
- size_t fit_len;
-#endif
-
- verify = getenv_yesno ("verify");
-
- switch (genimg_get_format ((void *)addr)) {
- case IMAGE_FORMAT_LEGACY:
- hdr = (image_header_t *)addr;
-
- if (!image_check_magic (hdr)) {
- puts ("Bad magic number\n");
- return 1;
- }
-
- if (!image_check_hcrc (hdr)) {
- puts ("Bad header crc\n");
- return 1;
- }
-
- if (verify) {
- if (!image_check_dcrc (hdr)) {
- puts ("Bad data crc\n");
- return 1;
- }
- }
-
- if (!image_check_type (hdr, IH_TYPE_SCRIPT)) {
- puts ("Bad image type\n");
- return 1;
- }
-
- /* get length of script */
- data = (ulong *)image_get_data (hdr);
-
- if ((len = uimage_to_cpu (*data)) == 0) {
- puts ("Empty Script\n");
- return 1;
- }
-
- /*
- * scripts are just multi-image files with one component, seek
- * past the zero-terminated sequence of image lengths to get
- * to the actual image data
- */
- while (*data++);
- break;
-#if defined(CONFIG_FIT)
- case IMAGE_FORMAT_FIT:
- if (fit_uname == NULL) {
- puts ("No FIT subimage unit name\n");
- return 1;
- }
-
- fit_hdr = (const void *)addr;
- if (!fit_check_format (fit_hdr)) {
- puts ("Bad FIT image format\n");
- return 1;
- }
-
- /* get script component image node offset */
- noffset = fit_image_get_node (fit_hdr, fit_uname);
- if (noffset < 0) {
- printf ("Can't find '%s' FIT subimage\n", fit_uname);
- return 1;
- }
-
- if (!fit_image_check_type (fit_hdr, noffset, IH_TYPE_SCRIPT)) {
- puts ("Not a image image\n");
- return 1;
- }
-
- /* verify integrity */
- if (verify) {
- if (!fit_image_check_hashes (fit_hdr, noffset)) {
- puts ("Bad Data Hash\n");
- return 1;
- }
- }
-
- /* get script subimage data address and length */
- if (fit_image_get_data (fit_hdr, noffset, &fit_data, &fit_len)) {
- puts ("Could not find script subimage data\n");
- return 1;
- }
-
- data = (ulong *)fit_data;
- len = (ulong)fit_len;
- break;
-#endif
- default:
- puts ("Wrong image format for autoscript\n");
- return 1;
- }
-
- debug ("** Script length: %ld\n", len);
-
- if ((cmd = malloc (len + 1)) == NULL) {
- return 1;
- }
-
- /* make sure cmd is null terminated */
- memmove (cmd, (char *)data, len);
- *(cmd + len) = 0;
-
-#ifdef CONFIG_SYS_HUSH_PARSER /*?? */
- rcode = parse_string_outer (cmd, FLAG_PARSE_SEMICOLON);
-#else
- {
- char *line = cmd;
- char *next = cmd;
-
- /*
- * break into individual lines,
- * and execute each line;
- * terminate on error.
- */
- while (*next) {
- if (*next == '\n') {
- *next = '\0';
- /* run only non-empty commands */
- if (*line) {
- debug ("** exec: \"%s\"\n",
- line);
- if (run_command (line, 0) < 0) {
- rcode = 1;
- break;
- }
- }
- line = next + 1;
- }
- ++next;
- }
- if (rcode == 0 && *line)
- rcode = (run_command(line, 0) >= 0);
- }
-#endif
- free (cmd);
- return rcode;
-}
-
-/**************************************************/
-#if defined(CONFIG_CMD_AUTOSCRIPT)
-int
-do_autoscript (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- ulong addr;
- int rcode;
- const char *fit_uname = NULL;
-
- /* Find script image */
- if (argc < 2) {
- addr = CONFIG_SYS_LOAD_ADDR;
- debug ("* autoscr: default load address = 0x%08lx\n", addr);
-#if defined(CONFIG_FIT)
- } else if (fit_parse_subimage (argv[1], load_addr, &addr, &fit_uname)) {
- debug ("* autoscr: subimage '%s' from FIT image at 0x%08lx\n",
- fit_uname, addr);
-#endif
- } else {
- addr = simple_strtoul(argv[1], NULL, 16);
- debug ("* autoscr: cmdline image address = 0x%08lx\n", addr);
- }
-
- printf ("## Executing script at %08lx\n", addr);
- rcode = autoscript (addr, fit_uname);
- return rcode;
-}
-
-U_BOOT_CMD(
- autoscr, 2, 0, do_autoscript,
- "run script from memory",
- "[addr] - run script starting at addr"
- " - A valid autoscr header must be present\n"
-#if defined(CONFIG_FIT)
- "For FIT format uImage addr must include subimage\n"
- "unit name in the form of addr:<subimg_uname>\n"
-#endif
-);
-#endif
diff --git a/common/cmd_load.c b/common/cmd_load.c
index 88fba88..d5eaac7 100644
--- a/common/cmd_load.c
+++ b/common/cmd_load.c
@@ -513,12 +513,13 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
}
-#ifdef CONFIG_AUTOSCRIPT
+#ifdef CONFIG_SOURCE
if (load_addr) {
char *s;
if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
- printf ("Running autoscript at addr 0x%08lX", load_addr);
+ printf ("Running "source" command at addr 0x%08lX",
+ load_addr);
s = getenv ("autoscript_uname");
if (s)
@@ -526,7 +527,7 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
puts (" ...\n");
- rcode = autoscript (load_addr, s);
+ rcode = source (load_addr, s);
}
}
#endif
diff --git a/common/cmd_net.c b/common/cmd_net.c
index a687849..9bef7a2 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -222,9 +222,10 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])
rcode = do_bootm (cmdtp, 0, 1, local_args);
}
-#ifdef CONFIG_AUTOSCRIPT
+#ifdef CONFIG_SOURCE
if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
- printf ("Running autoscript at addr 0x%08lX", load_addr);
+ printf ("Running "source" command at addr 0x%08lX",
+ load_addr);
s = getenv ("autoscript_uname");
if (s)
@@ -233,7 +234,7 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[])
puts (" ...\n");
show_boot_progress (83);
- rcode = autoscript (load_addr, s);
+ rcode = source (load_addr, s);
}
#endif
if (rcode < 0)
diff --git a/common/cmd_source.c b/common/cmd_source.c
new file mode 100644
index 0000000..43e1315
--- /dev/null
+++ b/common/cmd_source.c
@@ -0,0 +1,256 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, kharris(a)nexus-tech.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * The "source" command allows to define "script images", i. e. files
+ * that contain command sequences that can be executed by the command
+ * interpreter. It returns the exit status of the last command
+ * executed from the script. This is very similar to running a shell
+ * script in a UNIX shell, hence the name for the command.
+ */
+
+/* #define DEBUG */
+
+#include <common.h>
+#include <command.h>
+#include <image.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+#if defined(CONFIG_8xx)
+#include <mpc8xx.h>
+#endif
+#ifdef CONFIG_SYS_HUSH_PARSER
+#include <hush.h>
+#endif
+
+int
+source (ulong addr, const char *fit_uname)
+{
+ ulong len;
+ image_header_t *hdr;
+ ulong *data;
+ char *cmd;
+ int rcode = 0;
+ int verify;
+#if defined(CONFIG_FIT)
+ const void* fit_hdr;
+ int noffset;
+ const void *fit_data;
+ size_t fit_len;
+#endif
+
+ verify = getenv_yesno ("verify");
+
+ switch (genimg_get_format ((void *)addr)) {
+ case IMAGE_FORMAT_LEGACY:
+ hdr = (image_header_t *)addr;
+
+ if (!image_check_magic (hdr)) {
+ puts ("Bad magic number\n");
+ return 1;
+ }
+
+ if (!image_check_hcrc (hdr)) {
+ puts ("Bad header crc\n");
+ return 1;
+ }
+
+ if (verify) {
+ if (!image_check_dcrc (hdr)) {
+ puts ("Bad data crc\n");
+ return 1;
+ }
+ }
+
+ if (!image_check_type (hdr, IH_TYPE_SCRIPT)) {
+ puts ("Bad image type\n");
+ return 1;
+ }
+
+ /* get length of script */
+ data = (ulong *)image_get_data (hdr);
+
+ if ((len = uimage_to_cpu (*data)) == 0) {
+ puts ("Empty Script\n");
+ return 1;
+ }
+
+ /*
+ * scripts are just multi-image files with one component, seek
+ * past the zero-terminated sequence of image lengths to get
+ * to the actual image data
+ */
+ while (*data++);
+ break;
+#if defined(CONFIG_FIT)
+ case IMAGE_FORMAT_FIT:
+ if (fit_uname == NULL) {
+ puts ("No FIT subimage unit name\n");
+ return 1;
+ }
+
+ fit_hdr = (const void *)addr;
+ if (!fit_check_format (fit_hdr)) {
+ puts ("Bad FIT image format\n");
+ return 1;
+ }
+
+ /* get script component image node offset */
+ noffset = fit_image_get_node (fit_hdr, fit_uname);
+ if (noffset < 0) {
+ printf ("Can't find '%s' FIT subimage\n", fit_uname);
+ return 1;
+ }
+
+ if (!fit_image_check_type (fit_hdr, noffset, IH_TYPE_SCRIPT)) {
+ puts ("Not a image image\n");
+ return 1;
+ }
+
+ /* verify integrity */
+ if (verify) {
+ if (!fit_image_check_hashes (fit_hdr, noffset)) {
+ puts ("Bad Data Hash\n");
+ return 1;
+ }
+ }
+
+ /* get script subimage data address and length */
+ if (fit_image_get_data (fit_hdr, noffset, &fit_data, &fit_len)) {
+ puts ("Could not find script subimage data\n");
+ return 1;
+ }
+
+ data = (ulong *)fit_data;
+ len = (ulong)fit_len;
+ break;
+#endif
+ default:
+ puts ("Wrong image format for \"source\" command\n");
+ return 1;
+ }
+
+ debug ("** Script length: %ld\n", len);
+
+ if ((cmd = malloc (len + 1)) == NULL) {
+ return 1;
+ }
+
+ /* make sure cmd is null terminated */
+ memmove (cmd, (char *)data, len);
+ *(cmd + len) = 0;
+
+#ifdef CONFIG_SYS_HUSH_PARSER /*?? */
+ rcode = parse_string_outer (cmd, FLAG_PARSE_SEMICOLON);
+#else
+ {
+ char *line = cmd;
+ char *next = cmd;
+
+ /*
+ * break into individual lines,
+ * and execute each line;
+ * terminate on error.
+ */
+ while (*next) {
+ if (*next == '\n') {
+ *next = '\0';
+ /* run only non-empty commands */
+ if (*line) {
+ debug ("** exec: \"%s\"\n",
+ line);
+ if (run_command (line, 0) < 0) {
+ rcode = 1;
+ break;
+ }
+ }
+ line = next + 1;
+ }
+ ++next;
+ }
+ if (rcode == 0 && *line)
+ rcode = (run_command(line, 0) >= 0);
+ }
+#endif
+ free (cmd);
+ return rcode;
+}
+
+/**************************************************/
+#if defined(CONFIG_CMD_SOURCE)
+int
+do_source (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong addr;
+ int rcode;
+ const char *fit_uname = NULL;
+
+ /* Find script image */
+ if (argc < 2) {
+ addr = CONFIG_SYS_LOAD_ADDR;
+ debug ("* source: default load address = 0x%08lx\n", addr);
+#if defined(CONFIG_FIT)
+ } else if (fit_parse_subimage (argv[1], load_addr, &addr, &fit_uname)) {
+ debug ("* source: subimage '%s' from FIT image at 0x%08lx\n",
+ fit_uname, addr);
+#endif
+ } else {
+ addr = simple_strtoul(argv[1], NULL, 16);
+ debug ("* source: cmdline image address = 0x%08lx\n", addr);
+ }
+
+ printf ("## Executing script at %08lx\n", addr);
+ rcode = source (addr, fit_uname);
+ return rcode;
+}
+
+U_BOOT_CMD(
+ source, 2, 0, do_source,
+ "run script from memory",
+ "[addr]\n"
+ "\t- run script starting at addr\n"
+ "\t- A valid image header must be present\n"
+#if defined(CONFIG_FIT)
+ "For FIT format uImage addr must include subimage\n"
+ "unit name in the form of addr:<subimg_uname>\n"
+#endif
+);
+
+/*
+ * Keep for now for backward compatibility;
+ * remove later when support for "autoscr" goes away.
+ */
+static int
+do_autoscr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ printf ("\n### WARNING ### "
+ "\"autoscr\" is deprecated, use \"source\" instead ###\n\n");
+ return do_source (cmdtp, flag, argc, argv);
+}
+
+U_BOOT_CMD(
+ autoscr, 2, 0, do_autoscr,
+ "DEPRECATED - use \"source\" command instead",
+ "DEPRECATED - use \"source\" command instead\n"
+);
+#endif
diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt
index 9ba7a04..cd429a4 100644
--- a/doc/feature-removal-schedule.txt
+++ b/doc/feature-removal-schedule.txt
@@ -8,12 +8,20 @@ file.
---------------------------
What: "autoscr" command
-When: August 2009
-Why: "autosrc" is an ugly and completely non-standard name. The "autoscr"
- command is deprecated and will be replaced the "source" command as
- used by other shells such as bash. Both commands will be supported
- for a transition period of 6 months after which "autoscr" will be
- removed.
+When: Release 2009-09
+
+Why: "autosrc" is an ugly and completely non-standard name.
+ The "autoscr" command is deprecated and will be replaced by
+
+ the "source" command as used by other shells such as bash.
+
+ Starting with March 2009, both commands will be supported for
+ a transition period of 6 months after which "autoscr" will be
+ removed. During the transition period existing scripts and
+ environment variable names remain untouched for maximum
+ compatibiltiy; thse will be changed when support for the
+ "autoscr" command get's finally dropped.
+
Who: Peter Tyser <ptyser(a)xes-inc.com>
---------------------------
diff --git a/include/common.h b/include/common.h
index 952ddff..20c058a 100644
--- a/include/common.h
+++ b/include/common.h
@@ -234,8 +234,8 @@ int mac_read_from_eeprom(void);
/* common/flash.c */
void flash_perror (int);
-/* common/cmd_autoscript.c */
-int autoscript (ulong addr, const char *fit_uname);
+/* common/cmd_source.c */
+int source (ulong addr, const char *fit_uname);
extern ulong load_addr; /* Default Load Address */
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index db1f55c..c5e0d26 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -15,7 +15,6 @@
#define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */
#define CONFIG_CMD_ASKENV /* ask for env variable */
-#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
#define CONFIG_CMD_BDI /* bdinfo */
#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
#define CONFIG_CMD_BMP /* BMP support */
@@ -76,6 +75,7 @@
#define CONFIG_CMD_SETEXPR /* setexpr support */
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
#define CONFIG_CMD_SNTP /* SNTP support */
+#define CONFIG_CMD_SOURCE /* "source" command support */
#define CONFIG_CMD_SPI /* SPI utility */
#define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */
#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h
index 3667602..0376e44 100644
--- a/include/config_cmd_default.h
+++ b/include/config_cmd_default.h
@@ -16,7 +16,6 @@
* hardware, not fully tested, etc.).
*/
-#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
#define CONFIG_CMD_BDI /* bdinfo */
#define CONFIG_CMD_BOOTD /* bootd */
#define CONFIG_CMD_CONSOLE /* coninfo */
@@ -37,6 +36,7 @@
#define CONFIG_CMD_NFS /* NFS support */
#define CONFIG_CMD_RUN /* run command in env variable */
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_SOURCE /* "source" command support */
#define CONFIG_CMD_XIMG /* Load part of Multi Image */
#endif /* _CONFIG_CMD_DEFAULT_H */
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 7453518..41eaaab 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -124,19 +124,19 @@
*/
#include <config_cmd_default.h>
+#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
-#define CONFIG_CMD_DATE
+#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_SOURCE
#define CONFIG_CMD_USB
-#define CONFIG_CMD_AUTOSCRIPT
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h
index 527c846..150bd29 100644
--- a/include/configs/CRAYL1.h
+++ b/include/configs/CRAYL1.h
@@ -74,32 +74,32 @@
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_HUSH_PARSER 1
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_AUTOSCRIPT 1
+#define CONFIG_SOURCE 1
/*
* Command line configuration.
*/
+#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_BDI
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMI
#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
#define CONFIG_CMD_RUN
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_SETGETDCR
+#define CONFIG_CMD_SOURCE
/*
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 85c0e61..e6abbdc 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -290,14 +290,13 @@ int du440_phy_addr(int devnum);
#include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_BMP
+#define CONFIG_CMD_BSP
#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DTT
#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DTT
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
@@ -309,9 +308,10 @@ int du440_phy_addr(int devnum);
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_USB
#define CONFIG_SUPPORT_VFAT
@@ -428,7 +428,7 @@ int du440_phy_addr(int devnum);
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
-#define CONFIG_AUTOSCRIPT 1
+#define CONFIG_SOURCE 1
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h
index a0904d4..8941e4d 100644
--- a/include/configs/EP1C20.h
+++ b/include/configs/EP1C20.h
@@ -180,7 +180,6 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_SAVES
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_BOOTD
#undef CONFIG_CMD_CONSOLE
#undef CONFIG_CMD_FPGA
@@ -188,6 +187,7 @@
#undef CONFIG_CMD_ITEST
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_XIMG
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index a399d22..8f18ab2 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -152,7 +152,7 @@
/*
* Set default IP stuff just to get bootstrap entries into the
- * environment so that we can autoscript the full default environment.
+ * environment so that we can source the full default environment.
*/
#define CONFIG_ETHADDR 9a:52:63:15:85:25
#define CONFIG_SERVERIP 10.0.4.201
diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h
index cd910ea..edbc701 100644
--- a/include/configs/MVBC_P.h
+++ b/include/configs/MVBC_P.h
@@ -73,8 +73,8 @@
#define MV_INITRD_LENGTH 0x00300000
#define MV_SCRATCH_ADDR 0x00000000
#define MV_SCRATCH_LENGTH MV_INITRD_LENGTH
-#define MV_AUTOSCR_ADDR 0xff840000
-#define MV_AUTOSCR_ADDR2 0xff850000
+#define MV_SOURCE_ADDR 0xff840000
+#define MV_SOURCE_ADDR2 0xff850000
#define MV_DTB_ADDR 0xfffc0000
#define CONFIG_SHOW_BOOT_PROGRESS 1
@@ -130,8 +130,8 @@
#define CONFIG_RESET_TO_RETRY 1000
#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \
- then autoscr ${autoscr_addr}; \
- else autoscr ${autoscr_addr2}; \
+ then source ${autoscr_addr}; \
+ else source ${autoscr_addr2}; \
fi;"
#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
@@ -149,8 +149,8 @@
"fpga=0\0" \
"fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \
"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \
- "autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \
- "autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \
+ "autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \
+ "autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \
"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \
"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \
"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index 4ecf806..3cf3bb2 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -411,8 +411,8 @@
#define MV_FPGA_SIZE 0x00076ca2
#define MV_KERNEL_ADDR 0xff810000
#define MV_INITRD_ADDR 0xffb00000
-#define MV_AUTOSCR_ADDR 0xff804000
-#define MV_AUTOSCR_ADDR2 0xff806000
+#define MV_SOURCE_ADDR 0xff804000
+#define MV_SOURCE_ADDR2 0xff806000
#define MV_DTB_ADDR 0xff808000
#define MV_INITRD_LENGTH 0x00400000
@@ -423,8 +423,8 @@
#define MV_INITRD_ADDR_RAM 0x01000000
#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \
- then autoscr ${autoscr_addr}; \
- else autoscr ${autoscr_addr2}; \
+ then source ${autoscr_addr}; \
+ else source ${autoscr_addr2}; \
fi;"
#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
@@ -437,8 +437,8 @@
"fpga=0\0" \
"fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \
"fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \
- "autoscr_addr=" MK_STR(MV_AUTOSCR_ADDR) "\0" \
- "autoscr_addr2=" MK_STR(MV_AUTOSCR_ADDR2) "\0" \
+ "autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \
+ "autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \
"mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \
"mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \
"mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index 2d04d89..796938a 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -71,7 +71,7 @@
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
"bootm"
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index 4a27027..a14b2dd 100644
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -71,7 +71,7 @@
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
diff --git a/include/configs/NX823.h b/include/configs/NX823.h
index 9182223..5054d5e 100644
--- a/include/configs/NX823.h
+++ b/include/configs/NX823.h
@@ -55,7 +55,7 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
#undef CONFIG_WATCHDOG /* watchdog disabled, for now */
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
/*
* BOOTP options
@@ -72,7 +72,7 @@
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_SOURCE
/* call various generic functions */
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index 06c11e6..562c5c3 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -59,11 +59,11 @@
#define CONFIG_CMD_PCI
#define CONFIG_CMD_BSP
-#undef CONFIG_CMD_AUTOSCRIPT
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SAVEENV
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_SOURCE
#define CONFIG_BAUDRATE 19200 /* console baudrate */
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index 8c2befb..b9e450d 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -125,7 +125,7 @@
#define CONFIG_CMD_BEDBUG
-#define CONFIG_AUTOSCRIPT 1
+#define CONFIG_SOURCE 1
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
#undef CONFIG_LOADS_ECHO /* NO echo on for serial download */
@@ -419,15 +419,12 @@
/*
* Set default IP stuff just to get bootstrap entries into the
- * environment so that we can autoscript the full default environment.
+ * environment so that we can source the full default environment.
*/
#define CONFIG_ETHADDR 9a:52:63:15:85:25
#define CONFIG_SERVERIP 10.0.4.200
#define CONFIG_IPADDR 10.0.4.111
-/*-----------------------------------------------------------------------
- * Defaults for Autoscript
- */
#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
#define CONFIG_SYS_TFTP_LOADADDR 0x00100000
@@ -438,5 +435,4 @@
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
#endif /* __CONFIG_H */
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index d374981..fe1d102 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -253,7 +253,7 @@
#define CUSTOM_ENV_SETTINGS \
"bootfile=cam5200/uImage\0" \
"u-boot=cam5200/u-boot.bin\0" \
- "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
+ "setup=tftp 200000 cam5200/setup.img; source 200000\0"
#endif
#if defined(CONFIG_TQM5200_B)
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index 5f9a17f..b2d75e3 100644
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -150,11 +150,9 @@
* Command line configuration.
*/
-#define CONFIG_CMD_AUTOSCRIPT
#define CONFIG_CMD_BDI
#define CONFIG_CMD_CONSOLE
#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_IMI
#define CONFIG_CMD_IMLS
@@ -164,6 +162,8 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SOURCE
/*
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 33a67ca..fa27119 100644
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -69,11 +69,11 @@
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index f83dd9c..b0af2a9 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -127,7 +127,7 @@
#define CONFIG_MTD_PARTITIONS
#endif
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_SOURCE
#ifndef CONFIG_SYS_USE_NOR
# undef CONFIG_CMD_FLASH
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
index 7e7f124..2ddbd17 100644
--- a/include/configs/at91cap9adk.h
+++ b/include/configs/at91cap9adk.h
@@ -91,10 +91,10 @@
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 1fae3a3..1a5f9a4 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -86,11 +86,11 @@
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 752d7e9..4d50932 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -90,11 +90,11 @@
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index dd500ca..78e0081 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -91,11 +91,11 @@
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 7a4039c..a48f2cb 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -82,12 +82,12 @@
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_USB
#define CONFIG_CMD_NAND 1
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index c998952..4ed5514 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -117,9 +117,9 @@
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 2284277..b258f2d 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -142,9 +142,9 @@
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index 8cfa312..f93118e 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -142,9 +142,9 @@
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index 84e1aef..8169d10 100644
--- a/include/configs/eNET.h
+++ b/include/configs/eNET.h
@@ -70,16 +70,15 @@
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
#define CONFIG_CMD_BDI /* bdinfo */
#define CONFIG_CMD_BOOTD /* bootd */
#define CONFIG_CMD_CONSOLE /* coninfo */
#define CONFIG_CMD_ECHO /* echo arguments */
-#define CONFIG_CMD_SAVEENV /* saveenv */
#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
#define CONFIG_CMD_FPGA /* FPGA configuration Support */
#define CONFIG_CMD_IMI /* iminfo */
#define CONFIG_CMD_IMLS /* List all found images */
+#define CONFIG_CMD_IRQ /* IRQ Information */
#define CONFIG_CMD_ITEST /* Integer (and string) test */
#define CONFIG_CMD_LOADB /* loadb */
#define CONFIG_CMD_LOADS /* loads */
@@ -88,9 +87,10 @@
#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SAVEENV /* saveenv */
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_SOURCE /* "source" command Support */
#define CONFIG_CMD_XIMG /* Load part of Multi Image */
-#define CONFIG_CMD_IRQ /* IRQ Information */
#define CONFIG_BOOTDELAY 15
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyS0,9600"
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 21802df..739ff0d 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -139,9 +139,9 @@
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MMC
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_XIMG
#define CONFIG_ATMEL_USART 1
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
index a9eaa4a..c3f1a31 100644
--- a/include/configs/grsim.h
+++ b/include/configs/grsim.h
@@ -65,23 +65,23 @@
/*
* Supported commands
*/
-#define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */
-#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
-#define CONFIG_CMD_BDI /* bdinfo */
-#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_CONSOLE /* coninfo */
#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ECHO /* echo arguments */
-#define CONFIG_CMD_FPGA /* FPGA configuration Support */
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_FPGA /* FPGA configuration Support */
#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST /* Integer (and string) test */
-#define CONFIG_CMD_LOADB /* loadb */
-#define CONFIG_CMD_LOADS /* loads */
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_LOADS /* loads */
#define CONFIG_CMD_MISC /* Misc functions like sleep etc */
-#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_RUN /* run command in env variable */
-#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
-#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_SOURCE /* "source" command support */
+#define CONFIG_CMD_XIMG /* Load part of Multi Image */
/*
* Autobooting
diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
index 58f26fd..7ebbf25 100644
--- a/include/configs/grsim_leon2.h
+++ b/include/configs/grsim_leon2.h
@@ -64,21 +64,21 @@
/*
* Supported commands
*/
-#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
-#define CONFIG_CMD_BDI /* bdinfo */
-#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_CONSOLE /* coninfo */
#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ECHO /* echo arguments */
-#define CONFIG_CMD_FPGA /* FPGA configuration Support */
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_FPGA /* FPGA configuration Support */
#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST /* Integer (and string) test */
-#define CONFIG_CMD_LOADB /* loadb */
-#define CONFIG_CMD_LOADS /* loads */
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_LOADS /* loads */
#define CONFIG_CMD_MISC /* Misc functions like sleep etc */
#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_RUN /* run command in env variable */
-#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
-#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_SOURCE /* "source" command support */
+#define CONFIG_CMD_XIMG /* Load part of Multi Image */
/*
* Autobooting
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
index b1b4842..677baea 100644
--- a/include/configs/gth2.h
+++ b/include/configs/gth2.h
@@ -90,18 +90,18 @@
#define CONFIG_CMD_IDE
#define CONFIG_CMD_DHCP
-#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_ELF
#undef CONFIG_CMD_FAT
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_MII
#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_SAVEENV
+#undef CONFIG_CMD_SOURCE
/*
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index 58b95f4..b2e37ec 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -240,7 +240,7 @@
"new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \
"new_esw=run set_new_esw_script; " \
"tftp ${autoscr_ws} ${new_esw_script}; " \
- "iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0" \
+ "iminfo ${autoscr_ws}; source ${autoscr_ws} \0" \
"bootlimit=0 \0" \
CONFIG_KM_DEF_ENV_IOMUX \
CONFIG_KM_DEF_ENV_PRIVATE \
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index d52a5e0..8f00773 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -93,7 +93,7 @@
* 3 = 0x3C+0x3F = F3 + F6 : enable test mode
*/
-#define CONFIG_BOOTCOMMAND "autoscr 40040000;saveenv"
+#define CONFIG_BOOTCOMMAND "source 40040000;saveenv"
/* "gatewayip=10.8.211.250\0" \ */
#define CONFIG_EXTRA_ENV_SETTINGS \
@@ -108,7 +108,7 @@
"key_magic2=3A+3C\0" \
"key_cmd2=echo *** Entering Update Mode ***;" \
"if fatload ide 0:3 10000 update.scr;" \
- "then autoscr 10000;" \
+ "then source 10000;" \
"else echo *** UPDATE FAILED ***;" \
"fi\0" \
"key_magic3=3C+3F\0" \
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 05055c8..777a4d6 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -313,7 +313,7 @@
"cp.b 200000 FFF80000 80000\0" \
"upd=run load update\0" \
"lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \
- "autoscr 200000\0" \
+ "source 200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 9ac7e9a..edaa174 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -163,15 +163,15 @@
#else
- #define CONFIG_CMD_USB
#define CONFIG_CMD_CACHE
+ #define CONFIG_CMD_USB
- #undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_MISC
+ #undef CONFIG_CMD_SOURCE
#endif
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index a19eb78..cba0803 100644
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -51,12 +51,12 @@
#define CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_SOURCE
/*
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 983b5f2..13b89ac 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -135,7 +135,7 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_JFFS2
- #undef CONFIG_CMD_AUTOSCRIPT
+ #undef CONFIG_CMD_SOURCE
#endif
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0f9344b..c20981c 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -174,7 +174,7 @@
"rootfstype=jffs2\0" \
"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
- "autoscr ${loadaddr}\0" \
+ "source ${loadaddr}\0" \
"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index f4498a9..db82899 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -167,7 +167,7 @@
"rootfstype=jffs2\0" \
"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
- "autoscr ${loadaddr}\0" \
+ "source ${loadaddr}\0" \
"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index dee0417..64cc1c4 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -161,7 +161,7 @@
"rootfstype=jffs2\0" \
"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
- "autoscr ${loadaddr}\0" \
+ "source ${loadaddr}\0" \
"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 00c0374..592ec75 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -163,7 +163,7 @@
"rootfstype=jffs2\0" \
"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
- "autoscr ${loadaddr}\0" \
+ "source ${loadaddr}\0" \
"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index f8ae163..70ec036 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -171,7 +171,7 @@
"rootfstype=jffs2\0" \
"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
- "autoscr ${loadaddr}\0" \
+ "source ${loadaddr}\0" \
"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 5b68ef9..97e1da2 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -122,7 +122,7 @@
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/sc3/uImage\0" \
"u-boot=/tftpboot/sc3/u-boot.bin\0" \
- "setup=tftp 200000 /tftpboot/sc3/setup.img;autoscr 200000\0" \
+ "setup=tftp 200000 /tftpboot/sc3/setup.img;source 200000\0" \
"kernel_addr=FFE08000\0" \
""
#undef CONFIG_BOOTCOMMAND
@@ -186,20 +186,20 @@
#include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_CACHE
#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SOURCE
#undef CONFIG_WATCHDOG /* watchdog disabled */
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index 5971df7..a038901 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -53,9 +53,9 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
-#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
/*
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index 5a5f772..147233d 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -68,7 +68,7 @@
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
-#define CONFIG_AUTOSCRIPT
+#define CONFIG_SOURCE
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
diff --git a/include/configs/vct.h b/include/configs/vct.h
index 5371e2d..d202522 100644
--- a/include/configs/vct.h
+++ b/include/configs/vct.h
@@ -301,38 +301,38 @@ int vct_gpio_get(int pin);
* (NOR/OneNAND) usage and Linux kernel booting.
*/
#if defined(CONFIG_VCT_SMALL_IMAGE)
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_CRC32
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_EEPROM
#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_SNTP
#undef CONFIG_CMD_ELF
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_CACHE
-#undef CONFIG_CMD_BEDBUG
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_I2C
#undef CONFIG_CMD_IRQ
#undef CONFIG_CMD_ITEST
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADY
#undef CONFIG_CMD_MII
#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
#undef CONFIG_CMD_REGINFO
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_STRINGS
#undef CONFIG_CMD_TERMINAL
-#undef CONFIG_CMD_ASKENV
-#undef CONFIG_CMD_CRC32
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADY
-#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_USB
-#undef CONFIG_CMD_FAT
#undef CONFIG_DRIVER_SMC911X
#undef CONFIG_SOFT_I2C
-#undef CONFIG_AUTOSCRIPT
+#undef CONFIG_SOURCE
#undef CONFIG_SYS_LONGHELP
#undef CONFIG_TIMESTAMP
#endif /* CONFIG_VCT_SMALL_IMAGE */
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index d0afd29..1d529b3 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -49,10 +49,10 @@
*/
#include <config_cmd_default.h>
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_SOURCE
/*
--
1.6.0.6
