October 2009 - U-Boot

[U-Boot] ARM pull request v4
by Tom 24 Oct '09

24 Oct '09

Wolfgang, Please pull from u-boot-arm, master-sync branch. The change from the v3 is to put Steve's network patch back and to remove Nishanth's memory patch. Tom Here is the diff from v3 to v4 : 21c21 < Nishanth Menon (4): --- > Nishanth Menon (3): 24d23 < OMAP3: Fix SDRC init 45c44 < Steve Sakoman (1): --- > Steve Sakoman (2): 46a46 > ARM: OMAP3: Refactors the SM911x driver 103c103 < cpu/arm_cortexa8/omap3/mem.c | 21 +- --- > cpu/arm_cortexa8/omap3/mem.c | 18 +- 115a116 > drivers/net/smc911x.c | 12 +- 121,122d121 < include/asm-arm/arch-omap3/cpu.h | 1 + < include/asm-arm/arch-omap3/mem.h | 8 +- 159c158 < 100 files changed, 6323 insertions(+), 2459 deletions(-) --- > 99 files changed, 6322 insertions(+), 2460 deletions(-) ---- The request : The following changes since commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0: Daniel Gorsulowski (1): at91: Update MEESC board support are available in the git repository at: git://git.denx.de/u-boot-arm master-sync Eric Benard (3): AT91 CPU9260 Fix machine ID when using a CPU9G20. AT91 CPU9260 CPU9G20 Fix compile warnings AT91 CPUAT91 Fix compiler warning Minkyu Kang (5): s5pc1xx: support Samsung s5pc1xx SoC s5pc1xx: support onenand driver s5pc1xx: support serial driver s5pc1xx: add support SMDKC100 board s5pc1xx: SMDKC100: fix compile warnings Nishanth Menon (3): OMAP3: export enable_gpmc_cs_config to board files OMAP3: fix warnings when NAND/ONENAND is not used TI OMAP3: make gpmc_config as const Sandeep Paulraj (13): TI DaVinci DM355: Fix Compilation warning for DM355 EVM TI DaVinci DM365: Fix Compilation warning for DM365 EVM TI DaVinci DM646x: Adding initial support for DM6467 EVM TI: DaVinci: DM355 Leopard board support TI DaVinci: Maintainer for DM355 and DM365 EVM TI: OMAP3: Remove SZ_xx references TI DaVinci DM355: Add Config option for 64 bit Support TI DaVinci DM365: Add Config option for 64 bit Support TI DaVinci DVEVM: Add Config option for 64 bit Support TI DaVinci Sonata: Add Config option for 64 bit Support TI DaVinci: DM355 Leopard: Fix compilation warning TI DaVinci: Fix DM6467 EVM Compilation Warning TI DaVinci: Adding Copyright for DM365 EVM Simon Kagstrom (1): arm926ejs: 8-byte align stack to avoid LDRD/STRD problems Steve Sakoman (2): OMAP3: Update Overo and Beagle environment ARM: OMAP3: Refactors the SM911x driver Tom Rix (2): Zoom2 Fix serial gpmc setup TI OMAP3 SDP3430: Initial Support kevin.morfitt(a)fearnside-systems.co.uk (5): CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code Clean-up of s3c24x0 header files Clean-up of s3c24x0 drivers excluding nand driver Clean-up of s3c24x0 nand driver MAINTAINERS | 12 + MAKEALL | 4 + Makefile | 12 + board/davinci/dm355evm/dm355evm.c | 4 +- board/davinci/dm355leopard/Makefile | 52 ++ board/davinci/dm355leopard/config.mk | 6 + board/davinci/dm355leopard/dm355leopard.c | 98 +++ board/davinci/dm365evm/dm365evm.c | 5 +- board/davinci/dm6467evm/Makefile | 52 ++ board/davinci/dm6467evm/config.mk | 2 + board/davinci/dm6467evm/dm6467evm.c | 31 + board/eukrea/cpu9260/cpu9260.c | 2 +- board/logicpd/zoom2/zoom2.c | 5 +- board/mpl/vcma9/vcma9.c | 13 +- board/mpl/vcma9/vcma9.h | 20 +- board/samsung/smdk2400/smdk2400.c | 5 +- board/samsung/smdk2410/smdk2410.c | 5 +- board/samsung/smdkc100/Makefile | 55 ++ board/samsung/smdkc100/config.mk | 16 + board/samsung/smdkc100/lowlevel_init.S | 215 +++++ board/samsung/smdkc100/mem_setup.S | 197 +++++ board/samsung/smdkc100/onenand.c | 83 ++ board/samsung/smdkc100/smdkc100.c | 51 ++ board/sbc2410x/sbc2410x.c | 7 +- board/ti/sdp3430/Makefile | 49 ++ board/ti/sdp3430/config.mk | 33 + board/ti/sdp3430/sdp.c | 204 +++++ board/ti/sdp3430/sdp.h | 417 +++++++++ board/trab/cmd_trab.c | 12 +- board/trab/rs485.c | 12 +- board/trab/trab.c | 17 +- board/trab/trab_fkt.c | 26 +- board/trab/tsc2000.c | 17 +- board/trab/tsc2000.h | 4 +- board/trab/vfd.c | 12 +- common/serial.c | 18 + cpu/arm920t/s3c24x0/interrupts.c | 4 +- cpu/arm920t/s3c24x0/speed.c | 42 +- cpu/arm920t/s3c24x0/timer.c | 110 ++-- cpu/arm920t/s3c24x0/usb.c | 30 +- cpu/arm920t/s3c24x0/usb_ohci.c | 1323 +++++++++++++++-------------- cpu/arm920t/s3c24x0/usb_ohci.h | 209 +++--- cpu/arm920t/start.S | 63 +- cpu/arm926ejs/start.S | 1 + cpu/arm_cortexa8/omap3/mem.c | 18 +- cpu/arm_cortexa8/omap3/sys_info.c | 2 +- cpu/arm_cortexa8/s5pc1xx/Makefile | 53 ++ cpu/arm_cortexa8/s5pc1xx/cache.c | 43 + cpu/arm_cortexa8/s5pc1xx/clock.c | 308 +++++++ cpu/arm_cortexa8/s5pc1xx/cpu_info.c | 57 ++ cpu/arm_cortexa8/s5pc1xx/reset.S | 47 + cpu/arm_cortexa8/s5pc1xx/timer.c | 195 +++++ doc/README.s5pc1xx | 56 ++ drivers/i2c/s3c24x0_i2c.c | 273 +++--- drivers/mtd/nand/s3c2410_nand.c | 62 +- drivers/mtd/onenand/Makefile | 1 + drivers/mtd/onenand/samsung.c | 636 ++++++++++++++ drivers/net/smc911x.c | 12 +- drivers/rtc/s3c24x0_rtc.c | 130 ++-- drivers/serial/Makefile | 1 + drivers/serial/serial_s3c24x0.c | 160 ++-- drivers/serial/serial_s5pc1xx.c | 195 +++++ include/asm-arm/arch-davinci/hardware.h | 2 + include/asm-arm/arch-omap3/sys_proto.h | 2 + include/asm-arm/arch-s5pc1xx/clk.h | 32 + include/asm-arm/arch-s5pc1xx/clock.h | 94 ++ include/asm-arm/arch-s5pc1xx/cpu.h | 72 ++ include/asm-arm/arch-s5pc1xx/gpio.h | 129 +++ include/asm-arm/arch-s5pc1xx/power.h | 42 + include/asm-arm/arch-s5pc1xx/pwm.h | 59 ++ include/asm-arm/arch-s5pc1xx/uart.h | 47 + include/configs/cpu9260.h | 1 + include/configs/cpuat91.h | 4 +- include/configs/davinci_dm355evm.h | 1 + include/configs/davinci_dm355leopard.h | 162 ++++ include/configs/davinci_dm365evm.h | 2 + include/configs/davinci_dm6467evm.h | 132 +++ include/configs/davinci_dvevm.h | 1 + include/configs/davinci_sonata.h | 1 + include/configs/devkit8000.h | 15 +- include/configs/omap3_beagle.h | 42 +- include/configs/omap3_evm.h | 15 +- include/configs/omap3_overo.h | 42 +- include/configs/omap3_pandora.h | 15 +- include/configs/omap3_sdp3430.h | 369 ++++++++ include/configs/omap3_zoom1.h | 15 +- include/configs/omap3_zoom2.h | 15 +- include/configs/sbc2410x.h | 4 +- include/configs/smdk2400.h | 4 +- include/configs/smdk2410.h | 4 +- include/configs/smdkc100.h | 242 ++++++ include/configs/trab.h | 12 +- include/linux/mtd/onenand.h | 1 + include/linux/mtd/onenand_regs.h | 4 + include/linux/mtd/samsung_onenand.h | 131 +++ include/s3c2400.h | 494 +---------- include/s3c2410.h | 159 +--- include/s3c24x0.h | 605 ++------------ include/serial.h | 7 + 99 files changed, 6322 insertions(+), 2460 deletions(-) create mode 100644 board/davinci/dm355leopard/Makefile create mode 100644 board/davinci/dm355leopard/config.mk create mode 100644 board/davinci/dm355leopard/dm355leopard.c create mode 100644 board/davinci/dm6467evm/Makefile create mode 100644 board/davinci/dm6467evm/config.mk create mode 100644 board/davinci/dm6467evm/dm6467evm.c create mode 100644 board/samsung/smdkc100/Makefile create mode 100644 board/samsung/smdkc100/config.mk create mode 100644 board/samsung/smdkc100/lowlevel_init.S create mode 100644 board/samsung/smdkc100/mem_setup.S create mode 100644 board/samsung/smdkc100/onenand.c create mode 100644 board/samsung/smdkc100/smdkc100.c create mode 100644 board/ti/sdp3430/Makefile create mode 100644 board/ti/sdp3430/config.mk create mode 100644 board/ti/sdp3430/sdp.c create mode 100644 board/ti/sdp3430/sdp.h create mode 100644 cpu/arm_cortexa8/s5pc1xx/Makefile create mode 100644 cpu/arm_cortexa8/s5pc1xx/cache.c create mode 100644 cpu/arm_cortexa8/s5pc1xx/clock.c create mode 100644 cpu/arm_cortexa8/s5pc1xx/cpu_info.c create mode 100644 cpu/arm_cortexa8/s5pc1xx/reset.S create mode 100644 cpu/arm_cortexa8/s5pc1xx/timer.c create mode 100644 doc/README.s5pc1xx create mode 100644 drivers/mtd/onenand/samsung.c create mode 100644 drivers/serial/serial_s5pc1xx.c create mode 100644 include/asm-arm/arch-s5pc1xx/clk.h create mode 100644 include/asm-arm/arch-s5pc1xx/clock.h create mode 100644 include/asm-arm/arch-s5pc1xx/cpu.h create mode 100644 include/asm-arm/arch-s5pc1xx/gpio.h create mode 100644 include/asm-arm/arch-s5pc1xx/power.h create mode 100644 include/asm-arm/arch-s5pc1xx/pwm.h create mode 100644 include/asm-arm/arch-s5pc1xx/uart.h create mode 100644 include/configs/davinci_dm355leopard.h create mode 100644 include/configs/davinci_dm6467evm.h create mode 100644 include/configs/omap3_sdp3430.h create mode 100644 include/configs/smdkc100.h create mode 100644 include/linux/mtd/samsung_onenand.h

2 1

[U-Boot] [PATCH] sf: add GPL-2 license info
by Mike Frysinger 24 Oct '09

24 Oct '09

Some of the new spi flash files were missing explicit license lines. Signed-off-by: Mike Frysinger <vapier(a)gentoo.org> CC: Haavard Skinnemoen <haavard.skinnemoen(a)atmel.com> --- this needs Haavard's approval since he wrote/submitted the original code common/cmd_sf.c | 2 ++ drivers/mtd/spi/atmel.c | 1 + drivers/mtd/spi/spi_flash.c | 1 + 3 files changed, 4 insertions(+), 0 deletions(-) diff --git a/common/cmd_sf.c b/common/cmd_sf.c index d571f60..d69ae6a 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -2,7 +2,9 @@ * Command for accessing SPI flash. * * Copyright (C) 2008 Atmel Corporation + * Licensed under the GPL-2 or later. */ + #include <common.h> #include <spi_flash.h> diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c index 3bc2dff..8306c00 100644 --- a/drivers/mtd/spi/atmel.c +++ b/drivers/mtd/spi/atmel.c @@ -2,6 +2,7 @@ * Atmel SPI DataFlash support * * Copyright (C) 2008 Atmel Corporation + * Licensed under the GPL-2 or later. */ #include <common.h> diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 0e1495b..612f819 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -2,6 +2,7 @@ * SPI flash interface * * Copyright (C) 2008 Atmel Corporation + * Licensed under the GPL-2 or later. */ #include <common.h> -- 1.6.5.rc2

2 1

[U-Boot] [PATCH v2 0/4] add TI DA8xx support:
by Nick Thompson 24 Oct '09

24 Oct '09

Add initial support for DA8xx SoC's and the spectrum digital DA830 EVM board. DA8xx is similar to DaVinci devices, but has a differing memory map and updated peripherals. It is intended that DaVinci drivers will be modified in some way to support these differences. A side effect of this is that there are some legacy code constructs in this patch set that are required to utilise the DaVinci drivers as they stand now. For example there are some volatiles and memory pointer types defined that are no longer considered acceptable. The new code in this patch set doesn't use these constructs and the remaining artifacts can be removed when the DaVinci drivers stop using them. --- Changes from previous patch set: Removed Ethernet support (will add after davinci_emac has been patched) Moved board support to DaVinci directory for easier driver integration. Patch set run through checkpatch. (remaining WARNINGS should be justifiable) Removed unused code. Addressed comments on v1 Patch set. Nick.

2 1

[U-Boot] [PATCH] fdt: Fix fdt padding issue for initrd mem_rsv
by Kumar Gala 24 Oct '09

24 Oct '09

Its possible that we end up with a device tree that happens to be a particular size that after we call fdt_resize() we don't have any space left for the initrd mem_rsv. Fix this be adding a second mem_rsv into the size calculation. We had one to cover the fdt itself and we have the potential of adding a second for the initrd. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- Wolfgang, this has been a long standing bug but only shows up if the fdt blob happens to be a particular size. Please include this for the v2009.11 release. - k common/fdt_support.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/common/fdt_support.c b/common/fdt_support.c index 89164a1..fecd904 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -604,10 +604,11 @@ int fdt_resize(void *blob) /* * Calculate the actual size of the fdt - * plus the size needed for fdt_add_mem_rsv + * plus the size needed for two fdt_add_mem_rsv, one + * for the fdt itself and one for a possible initrd */ actualsize = fdt_off_dt_strings(blob) + - fdt_size_dt_strings(blob) + sizeof(struct fdt_reserve_entry); + fdt_size_dt_strings(blob) + 2*sizeof(struct fdt_reserve_entry); /* Make it so the fdt ends on a page boundary */ actualsize = ALIGN(actualsize + ((uint)blob & 0xfff), 0x1000); -- 1.6.0.6

3 2

[U-Boot] Please pull u-boot-ppc4xx/master
by Stefan Roese 24 Oct '09

24 Oct '09

Hi Wolfgang, please pull some fixes and last minute updates from ppc4xx. Thanks. The following changes since commit f67066b6b0740b826ed862615c5ab022aaf4779a: Mike Frysinger (1): envcrc: check return value of fwrite() are available in the git repository at: git://www.denx.de/git/u-boot-ppc4xx.git master Stefan Roese (7): fdt: Add fdt_fixup_nor_flash_size() to fixup NOR FLASH size in dtb ppc4xx: Update flash size in reg property of the NOR flash node ppc4xx: Add function to check and dynamically change PCI sync clock ppc4xx: Print PCI synchronous clock frequency upon bootup ppc4xx: Sequoia/Rainer: Check and reconfigure the PCI sync clock ppc4xx: Yosemite/Yellowstone: Check and reconfigure the PCI sync clock ppc4xx: Sequoia: Add chip_config command Wolfgang Denk (1): cpu/ppc4xx/fdt.c: avoid strcpy() to constant string board/amcc/sequoia/Makefile | 4 +- board/amcc/sequoia/chip_config.c | 122 ++++++++++++++++++++ board/amcc/sequoia/cmd_sequoia.c | 231 -------------------------------------- board/amcc/sequoia/sequoia.c | 26 ++++- board/amcc/yosemite/yosemite.c | 26 ++++- common/fdt_support.c | 44 +++++++ cpu/ppc4xx/cpu.c | 9 ++- cpu/ppc4xx/cpu_init.c | 69 +++++++++++ cpu/ppc4xx/fdt.c | 10 ++- include/configs/amcc-common.h | 2 + include/configs/sequoia.h | 6 + include/fdt_support.h | 2 + include/ppc440.h | 7 +- include/ppc4xx.h | 2 + 14 files changed, 318 insertions(+), 242 deletions(-) create mode 100644 board/amcc/sequoia/chip_config.c delete mode 100644 board/amcc/sequoia/cmd_sequoia.c

2 1

[U-Boot] Please pull u-boot-mpc83xx.git
by Kim Phillips 24 Oct '09

24 Oct '09

Wolfgang Denk, Please pull a fix for 8313 rev.2+ networking device trees and a minor consistency fix: The following changes since commit cd77dd109c4a439519a78c32eddc42bdebc7a61f: Wolfgang Denk (1): Merge branch 'reloc' are available in the git repository at: git://git.denx.de/u-boot-mpc83xx master Kim Phillips (1): mpc83xx: mpc8313 - handle erratum IPIC1 (TSEC IRQ number swappage) Paul Gortmaker (1): mpc83xx: cosmetic comment update relating to SPD EEPROM cpu/mpc83xx/fdt.c | 39 +++++++++++++++++++++++++++++++++++++++ include/configs/sbc8349.h | 2 +- include/configs/vme8349.h | 2 +- 3 files changed, 41 insertions(+), 2 deletions(-) Thanks, Kim

2 4

[U-Boot] Pull request - net
by Ben Warren 24 Oct '09

24 Oct '09

Wolfgang, Please pull the net branch (master). This includes a patch that was somehow lost back in April. It's pretty low-risk. The following changes since commit f67066b6b0740b826ed862615c5ab022aaf4779a: Mike Frysinger (1): envcrc: check return value of fwrite() are available in the git repository at: git://git.denx.de/u-boot-net.git master Daniel Mack (1): smc911x: add support for LAN9220 drivers/net/smc911x.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) regards, Ben

2 1

[U-Boot] [PATCH v2 2/2] NET: Base support for etsec2.0
by Sandeep Gopalpet 24 Oct '09

24 Oct '09

1. Modified the tsec_mdio structure to include the new regs 2. Modified the MDIO_BASE_ADDR so that it will handle both older version and new version of etsec. Signed-off-by: Sandeep Gopalpet <sandeep.kumar(a)freescale.com> --- include/asm-ppc/immap_85xx.h | 7 ++++++- include/configs/P1_P2_RDB.h | 5 +++++ include/tsec.h | 11 +++++++++++ 3 files changed, 22 insertions(+), 1 deletions(-) diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index ad3910c..9a5326a 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1933,10 +1933,15 @@ typedef struct ccsr_gur { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) /* TSEC and MDIO OFFSETS */ +#ifdef CONFIG_TSECV2 +#define CONFIG_SYS_TSEC1_OFFSET 0xB0000 +#else #define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#endif + #define TSEC_SIZE 0x01000 -#define CONFIG_SYS_MDIO1_OFFSET 0x24520 +#define CONFIG_SYS_MDIO1_OFFSET 0x24000 #define MDIO_OFFSET 0x01000 #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 8e97ad0..77c43e7 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -68,6 +68,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_MP #endif +/* TSECV2 */ +#if defined(CONFIG_P1020) +#define CONFIG_TSECV2 +#endif + /* * These can be toggled for performance analysis, otherwise use default. */ diff --git a/include/tsec.h b/include/tsec.h index 2b9c9c3..e881082 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -451,14 +451,25 @@ typedef struct tsec_hash_regs uint res2[24]; } tsec_hash_t; +/* MDIO structure for etsec2.0. + * Backward compatible to etsec1.x + */ + typedef struct tsec_mdio { + uint res1[4]; + uint ieventm; /* MDIO Interrupt event register */ + uint imaskm; /* MDIO Interrupt mask register */ + uint res2; + uint emapm; /* MDIO Event mapping register */ + uint res3[320]; uint miimcfg; /* MII Management: Configuration */ uint miimcom; /* MII Management: Command */ uint miimadd; /* MII Management: Address */ uint miimcon; /* MII Management: Control */ uint miimstat; /* MII Management: Status */ uint miimind; /* MII Management: Indicators */ + uint res4[690]; } tsec_mdio_t; typedef struct tsec -- 1.5.2.2

1 0

[U-Boot] [PATCH] NET: Base support for etsec2.0
by Sandeep Gopalpet 24 Oct '09

24 Oct '09

1. Modified the tsec_mdio structure to include the new regs 2. Modified the MDIO_BASE_ADDR so that it will handle both older version and new version of etsec. Signed-off-by: Sandeep Gopalpet <sandeep.kumar(a)freescale.com> --- include/asm-ppc/immap_85xx.h | 7 ++++++- include/configs/P1_P2_RDB.h | 5 +++++ include/tsec.h | 11 +++++++++++ 3 files changed, 22 insertions(+), 1 deletions(-) diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index ad3910c..9a5326a 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -1933,10 +1933,15 @@ typedef struct ccsr_gur { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) /* TSEC and MDIO OFFSETS */ +#ifdef CONFIG_TSECV2 +#define CONFIG_SYS_TSEC1_OFFSET 0xB0000 +#else #define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#endif + #define TSEC_SIZE 0x01000 -#define CONFIG_SYS_MDIO1_OFFSET 0x24520 +#define CONFIG_SYS_MDIO1_OFFSET 0x24000 #define MDIO_OFFSET 0x01000 #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 8e97ad0..77c43e7 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -68,6 +68,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_MP #endif +/* TSECV2 */ +#if defined(CONFIG_P1020) +#define CONFIG_TSECV2 +#endif + /* * These can be toggled for performance analysis, otherwise use default. */ diff --git a/include/tsec.h b/include/tsec.h index 2b9c9c3..e881082 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -451,14 +451,25 @@ typedef struct tsec_hash_regs uint res2[24]; } tsec_hash_t; +/* MDIO structure for etsec2.0. + * Backward compatible to etsec1.x + */ + typedef struct tsec_mdio { + uint res1[4]; + uint ieventm; /* MDIO Interrupt event register */ + uint imaskm; /* MDIO Interrupt mask register */ + uint res2; + uint emapm; /* MDIO Event mapping register */ + uint res3[320]; uint miimcfg; /* MII Management: Configuration */ uint miimcom; /* MII Management: Command */ uint miimadd; /* MII Management: Address */ uint miimcon; /* MII Management: Control */ uint miimstat; /* MII Management: Status */ uint miimind; /* MII Management: Indicators */ + uint res4[690]; } tsec_mdio_t; typedef struct tsec -- 1.5.2.2

1 0

[U-Boot] Mr.P. G.Alonso
by Mr.P. G.Alonso 24 Oct '09

24 Oct '09

I on behalf of my colleagues being senior staffs with a bank here in Spain need your humble assistance in repatriating some funds left behind by a late customer that died before, it is declared unserviceable within the next 30 days. I decided to contact you due to the urgency of this transaction .Every attemptto trace any member of his family has proved unsuccessful and abortive.I will give you more information upon your response to this proposal, to my personal Email address.Email: alonsogomez1969(a)aol.com. Best Regards, Mr.Paul Gomez

1 0