January 2009 - U-Boot

[U-Boot] [PATCH 25/31] powerpc: mgcoge, mgsuvd, kmeter1: board Id parameters
by Heiko Schocher 28 Jan '09

28 Jan '09

This patch leads to correct use of the boardId parameters for the boards mgcoge, mgsuvd, kmeter1 when downloading a new esw script via tftp Signed-off-by: Thomas Herzmann <thomas.herzmann(a)keymile.com> Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/configs/keymile-common.h | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index d8b343b..80f9446 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -243,8 +243,10 @@ "addip addcon addboardid addpram; " \ "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ "saveenv \0" \ - "new_esw_script=new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \ - "new_esw=tftp ${autoscr_ws} ${new_esw_script}; " \ + "set_new_esw_script=setenv new_esw_script " \ + "new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \ + "new_esw=run set_new_esw_script; " \ + "tftp ${autoscr_ws} ${new_esw_script}; " \ "iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0" \ "bootlimit=0 \0" \ CONFIG_KM_DEF_ENV_IOMUX \ -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0

[U-Boot] [PATCH 24/31] mgcoge, mgsuvd, kmeter1: removed double env params
by Heiko Schocher 28 Jan '09

28 Jan '09

This patch removes double environment entries for all keymile boards (mgcoge, mgsuvd, kmeter1) These double entries (baudrate, bootcmd) otherwise cause errors. Signed-off-by: Thomas Herzmann <thomas.herzmann(a)keymile.com> Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/configs/keymile-common.h | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-) diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index f91afe2..d8b343b 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -50,7 +50,6 @@ #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ -#define CONFIG_BOOTCOMMAND "run net_nfs" #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ @@ -161,7 +160,6 @@ #ifndef CONFIG_KM_DEF_ENV #define CONFIG_KM_DEF_ENV \ "netdev=eth0\0" \ - "baudrate=115200\0" \ "u-boot_addr_r=100000\0" \ "kernel_addr_r=200000\0" \ "fdt_addr_r=600000\0" \ -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0

[U-Boot] [PATCH 23/31] powerpc: mgcoge, mgsuvd, kmeter1: activate pram data area
by Heiko Schocher 28 Jan '09

28 Jan '09

This patch activates a protected area (pram) that will not be used by the linux kernel. This is done for all keymile boards Signed-off-by: Thomas Herzmann <thomas.herzmann(a)keymile.com> Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/configs/keymile-common.h | 20 +++++++++++++------- include/configs/kmeter1.h | 2 ++ include/configs/mgcoge.h | 2 ++ include/configs/mgsuvd.h | 2 ++ 4 files changed, 19 insertions(+), 7 deletions(-) diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 4ff6fb7..f91afe2 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -194,18 +194,21 @@ ":${hostname}:${netdev}:off panic=1\0" \ "addboardid=setenv bootargs ${bootargs} " \ "hwKey=${IVM_HWKey} boardId=0x${IVM_BoardId} \0" \ + "addpram=setenv bootargs ${bootargs} " \ + "mem=${mem} pram=${pram}\0" \ + "pram=" xstr(CONFIG_PRAM) "k\0" \ "net_nfs=tftp ${kernel_addr_r} ${kernel_file}; " \ "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addcon addboardid;" \ + "run nfsargs addip addcon addboardid addpram;" \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ "net_self=tftp ${kernel_addr_r} ${kernel_file}; " \ "tftp ${fdt_addr_r} ${fdt_file}; " \ "tftp ${ramdisk_addr} ${ramdisk_file}; " \ - "run ramargs addip; " \ + "run ramargs addip addboardid addpram; " \ "bootm ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r}\0"\ "flash_nfs=run nfsargs addip addcon;" \ "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addcon;" \ + "flash_self=run ramargs addip addcon addboardid addpram;" \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "bootcmd=run mtdargs addip addcon addboardid addpram; " \ "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \0" \ @@ -229,14 +232,17 @@ "setenv backup_rootfs ${bank1_rootfs} \0" \ "setbank0=run actual0 backup1 \0" \ "setbank1=run actual1 backup0 \0" \ - "release=setenv bootcmd \'run mtdargs addip addcon addboardid;" \ + "release=setenv bootcmd " \ + "\'run mtdargs addip addcon addboardid addpram;" \ "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ "saveenv \0" \ - "develop=setenv bootcmd \'run nfsargs addip addcon addboardid;" \ + "develop=setenv bootcmd " \ + "\'run nfsargs addip addcon addboardid addpram;" \ "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ "saveenv \0" \ - "developall=setenv bootcmd \'run load_fdt load_kernel nfsargs " \ - "addip addcon addboardid; " \ + "developall=setenv bootcmd " \ + "\'run load_fdt load_kernel nfsargs " \ + "addip addcon addboardid addpram; " \ "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ "saveenv \0" \ "new_esw_script=new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index feb6150..2eafac6 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -438,6 +438,8 @@ #define BOOTFLASH_START F0000000 +#define CONFIG_PRAM 512 /* protected RAM [KBytes] */ + #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_KM_DEF_ENV \ "rootpath=/opt/eldk/ppc_82xx\0" \ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index fad5c09..987adbc 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -82,6 +82,8 @@ #define BOOTFLASH_START FE000000 +#define CONFIG_PRAM 512 /* protected RAM [KBytes] */ + #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_KM_DEF_ENV \ "rootpath=/opt/eldk/ppc_82xx\0" \ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index bf4e8b0..66bcc73 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -56,6 +56,8 @@ #define BOOTFLASH_START F0000000 +#define CONFIG_PRAM 512 /* protected RAM [KBytes] */ + #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_KM_DEF_ENV \ "rootpath=/opt/eldk/ppc_8xx\0" \ -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0

[U-Boot] [PATCH 17/31] mpc83xx, i2c: add mux support for fsl_i2c
by Heiko Schocher 28 Jan '09

28 Jan '09

Signed-off-by: Heiko Schocher <hs(a)denx.de> --- drivers/i2c/fsl_i2c.c | 24 +++++++++++++++++++++++- 1 files changed, 23 insertions(+), 1 deletions(-) diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index ce646fd..5242884 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -42,6 +42,7 @@ DECLARE_GLOBAL_DATA_PTR; #define CONFIG_SYS_SPD_BUS_NUM 0 #endif static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM; +static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0; static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED}; @@ -369,6 +370,23 @@ i2c_probe(uchar chip) int i2c_set_bus_num(unsigned int bus) { +#if defined(CONFIG_I2C_MUX) + if (bus < CONFIG_SYS_MAX_I2C_BUS) { + i2c_bus_num = bus; + } else { + int ret; + + ret = i2x_mux_select_mux(bus); + if (ret == 0) { + /* with CONFIG_I2C_MUX only I2C Controller 1 + * is usable + */ + i2c_bus_num = 0; + i2c_bus_num_mux = bus; + } else + return ret; + } +#else #ifdef CONFIG_SYS_I2C2_OFFSET if (bus > 1) { #else @@ -378,7 +396,7 @@ int i2c_set_bus_num(unsigned int bus) } i2c_bus_num = bus; - +#endif return 0; } @@ -396,7 +414,11 @@ int i2c_set_bus_speed(unsigned int speed) unsigned int i2c_get_bus_num(void) { +#if defined(CONFIG_I2C_MUX) + return i2c_bus_num_mux; +#else return i2c_bus_num; +#endif } unsigned int i2c_get_bus_speed(void) -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0

[U-Boot] [PATCH 15/31] powerpc: keymile boards: conditional definition of a private env part
by Heiko Schocher 28 Jan '09

28 Jan '09

by defining CONFIG_KM_DEF_ENV_PRIVATE somewhere the content of CONFIG_KM_DEF_ENV_PRIVATE will be included into the default environment Signed-off-by: Thomas Herzmann <thomas.herzmann(a)keymile.com> Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/configs/keymile-common.h | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-) diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 417f6b0..6abe27a 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -155,6 +155,11 @@ "stdout=serial \0" #endif +#ifndef CONFIG_KM_DEF_ENV_PRIVATE +#define CONFIG_KM_DEF_ENV_PRIVATE \ + "kmprivate=empty\0" +#endif + #define xstr(s) str(s) #define str(s) #s @@ -196,7 +201,7 @@ "hwKey=${IVM_HWKey} boardId=0x${IVM_BoardId} \0" \ "net_nfs=tftp ${kernel_addr_r} ${kernel_file}; " \ "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addcon;" \ + "run nfsargs addip addcon addboardid;" \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ "net_self=tftp ${kernel_addr_r} ${kernel_file}; " \ "tftp ${fdt_addr_r} ${fdt_file}; " \ @@ -244,6 +249,7 @@ "iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0" \ "bootlimit=0 \0" \ CONFIG_KM_DEF_ENV_IOMUX \ + CONFIG_KM_DEF_ENV_PRIVATE \ "" #endif /* CONFIG_KM_DEF_ENV */ -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0

[U-Boot] [PATCH 14/31] powerpc: mgcoge, mgsuvd: make some definitions in keymile-common.h conditional
by Heiko Schocher 28 Jan '09

28 Jan '09

in order to be able to "patch" some definitions of keymile's config files very easy, these definitions are surrounded by ifdefs Signed-off-by: Thomas Herzmann <thomas.herzmann(a)keymile.com> Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/configs/keymile-common.h | 31 ++++++++++++++++++++++++++++++- include/configs/mgcoge.h | 2 -- include/configs/mgsuvd.h | 2 -- 3 files changed, 30 insertions(+), 5 deletions(-) diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 2e324fe..417f6b0 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -136,9 +136,29 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME +/* define this to use the keymile's io muxing feature */ +/*#define CONFIG_IO_MUXING */ + +#ifdef CONFIG_IO_MUXING +#define CONFIG_KM_DEF_ENV_IOMUX \ + "nc=setenv ethact HDLC ETHERNET \0" \ + "nce=setenv ethact SCC ETHERNET \0" \ + "stderr=serial,nc \0" \ + "stdin=serial,nc \0" \ + "stdout=serial,nc \0" \ + "tftpsrcp=69 \0" \ + "tftpdstp=69 \0" +#else +#define CONFIG_KM_DEF_ENV_IOMUX \ + "stderr=serial \0" \ + "stdin=serial \0" \ + "stdout=serial \0" +#endif + #define xstr(s) str(s) #define str(s) #s +#ifndef CONFIG_KM_DEF_ENV #define CONFIG_KM_DEF_ENV \ "netdev=eth0\0" \ "baudrate=115200\0" \ @@ -157,9 +177,17 @@ "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) \ " ${filesize};" \ "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \ + "load_fdt=tftp ${fdt_addr_r} ${fdt_file}; " \ + "setenv actual_fdt_addr ${fdt_addr_r} \0" \ + "load_kernel=tftp ${kernel_addr_r} ${kernel_file}; " \ + "setenv actual_kernel_addr ${kernel_addr_r} \0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ + "mtdargs=setenv bootargs root=${actual_rootfs} rw " \ + "rootfstype=jffs2 \0" \ + "altmtdargs=setenv bootargs root=${backup_rootfs} rw " \ + "rootfstype=jffs2 \0" \ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ @@ -215,7 +243,8 @@ "new_esw=tftp ${autoscr_ws} ${new_esw_script}; " \ "iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0" \ "bootlimit=0 \0" \ + CONFIG_KM_DEF_ENV_IOMUX \ "" - +#endif /* CONFIG_KM_DEF_ENV */ #endif /* __CONFIG_KEYMILE_H */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index 070fe53..fad5c09 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -87,8 +87,6 @@ "rootpath=/opt/eldk/ppc_82xx\0" \ "addcon=setenv bootargs ${bootargs} " \ "console=ttyCPM0,${baudrate}\0" \ - "tftpsrcp=69\0" \ - "tftpdstp=69\0" \ "mtdids=nor0=boot,nor1=app \0" \ "mtdparts=mtdparts=boot:384k(u-boot),128k(env),128k(envred)," \ "3456k(free);app:3m(esw0),10m(rootfs0),3m(esw1)," \ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index 700878f..bf4e8b0 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -61,8 +61,6 @@ "rootpath=/opt/eldk/ppc_8xx\0" \ "addcon=setenv bootargs ${bootargs} " \ "console=ttyCPM0,${baudrate}\0" \ - "tftpsrcp=69\0" \ - "tftpdstp=69\0" \ "mtdids=nor0=app \0" \ "mtdparts=mtdparts=app:384k(u-boot),128k(env),128k(envred)," \ "128k(free),1536k(esw0),8704k(rootfs0),1536k(esw1)," \ -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0

[U-Boot] [PATCH 13/31] powerpc: mgcoge, mgsuvd: move IVM feature config to keymile-common.h
by Heiko Schocher 28 Jan '09

28 Jan '09

the IVM feature is enabled for all keymile boards therefore the configuration parameters are trans- ferred from the board specific config files to keymile-common.h. Signed-off-by: Thomas Herzmann <thomas.herzmann(a)keymile.com> Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/configs/keymile-common.h | 20 ++++++++++++++++++++ include/configs/mgcoge.h | 19 +------------------ include/configs/mgsuvd.h | 19 +------------------ 3 files changed, 22 insertions(+), 36 deletions(-) diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index aaefdf1..2e324fe 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -106,6 +106,26 @@ #define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ #define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ +#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD) +#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_I2C_CMD_TREE 1 +#define CONFIG_SYS_MAX_I2C_BUS 2 +#define CONFIG_SYS_I2C_INIT_BOARD 1 +#define CONFIG_I2C_MUX 1 + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* Support the IVM EEprom */ +#define CONFIG_SYS_IVM_EEPROM_ADR 0x50 +#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 +#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 +#endif + #define CONFIG_SYS_FLASH_PROTECTION 1 /* diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index f307382..070fe53 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -95,6 +95,7 @@ "10m(rootfs1),1m(var),5m(cfg) \0" \ "partition=nor1,5 \0" \ "new_env=prot off FE060000 FE09FFFF; era FE060000 FE09FFFF \0" \ + "EEprom_ivm=pca9544a:70:4 \0" \ "" #define CONFIG_SYS_SDRAM_BASE 0x00000000 @@ -150,24 +151,6 @@ else iop->pdat &= ~0x00020000 #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_I2C_CMD_TREE 1 -#define CONFIG_SYS_MAX_I2C_BUS 2 -#define CONFIG_SYS_I2C_INIT_BOARD 1 -#define CONFIG_I2C_MUX 1 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* Support the IVM EEprom */ -#define CONFIG_SYS_IVM_EEPROM_ADR 0x50 -#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 -#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 - /* I2C SYSMON (LM75, AD7414 is almost compatible) */ #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ #define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index 7c97a21..700878f 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -69,6 +69,7 @@ "2432k(rootfs1),640k(var),768k(cfg)\0" \ "partition=nor0,9 \0" \ "new_env=prot off F0060000 F009FFFF; era F0060000 F009FFFF \0" \ + "EEprom_ivm=pca9544a:70:4 \0" \ "" #undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */ @@ -290,24 +291,6 @@ } #define I2C_DELAY udelay(50) /* 1/4 I2C clock duration */ -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_I2C_CMD_TREE 1 -#define CONFIG_SYS_MAX_I2C_BUS 2 -#define CONFIG_SYS_I2C_INIT_BOARD 1 -#define CONFIG_I2C_MUX 1 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* Support the IVM EEprom */ -#define CONFIG_SYS_IVM_EEPROM_ADR 0x50 -#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 -#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 - /* I2C SYSMON (LM75, AD7414 is almost compatible) */ #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ #define CONFIG_DTT_SENSORS {0, 2, 4, 6} /* Sensor addresses */ -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0

[U-Boot] [PATCH 11/31] powerpc, mgcoge, mgsuvd: MTD feature activated, partitions set
by Heiko Schocher 28 Jan '09

28 Jan '09

- activated the MTD and JFFS2 cmdline-features - set the default partition table to meet the needs of the keymile boot concept - increased the u-boot size for mgsuvd from 256k to 384k (will be needed soon) Signed-off-by: Thomas Herzmann <thomas.herzmann(a)keymile.com> Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/configs/keymile-common.h | 2 ++ include/configs/mgcoge.h | 5 +++++ include/configs/mgsuvd.h | 13 +++++++++---- 3 files changed, 16 insertions(+), 4 deletions(-) diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 2864e8e..aaefdf1 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -48,6 +48,8 @@ #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C +#define CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_CMDLINE #endif #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index 07e0b8e..a754f0b 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -355,4 +355,9 @@ #define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc/cpm/serial@11a90" +#define MTDIDS_DEFAULT "nor0=boot,nor1=app" +#define MTDPARTS_DEFAULT (\ + "mtdparts=boot:384k(u-boot),128k(env),128k(envred),3456k(free);" \ + "app:3m(esw0),10m(rootfs0),3m(esw1),10m(rootfs1),1m(var),5m(cfg)") + #endif /* __CONFIG_H */ diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index 01f5bd3..7c97a21 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -64,11 +64,11 @@ "tftpsrcp=69\0" \ "tftpdstp=69\0" \ "mtdids=nor0=app \0" \ - "mtdparts=mtdparts=app:256k(u-boot),128k(env),128k(envred)," \ - "256k(free),1536k(esw0),8704k(rootfs0),1536k(esw1)," \ + "mtdparts=mtdparts=app:384k(u-boot),128k(env),128k(envred)," \ + "128k(free),1536k(esw0),8704k(rootfs0),1536k(esw1)," \ "2432k(rootfs1),640k(var),768k(cfg)\0" \ "partition=nor0,9 \0" \ - "new_env=prot off F0040000 F007FFFF; era F0040000 F007FFFF \0" \ + "new_env=prot off F0060000 F009FFFF; era F0060000 F009FFFF \0" \ "" #undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */ @@ -101,7 +101,7 @@ */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_FLASH_BASE 0xf0000000 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 256 kB for Monitor */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ @@ -316,4 +316,9 @@ #define CONFIG_SYS_DTT_HYSTERESIS 3 #define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS) +#define MTDIDS_DEFAULT "nor0=app" +#define MTDPARTS_DEFAULT ( \ + "mtdparts=app:384k(u-boot),128k(env),128k(envred),128k(free)," \ + "1536k(esw0),8704k(rootfs0),1536k(esw1),2432k(rootfs1),640k(var),768k(cfg)") + #endif /* __CONFIG_H */ -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0

[U-Boot] [PATCH 06/31] mpc82xx, mgcoge: add CS4 on mgcoge
by Heiko Schocher 28 Jan '09

28 Jan '09

This patch adds CS4 on mgcoge to enable the FPGA Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/configs/mgcoge.h | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-) diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index 12be62a..f772627 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -322,6 +322,18 @@ ORxG_CSNT | ORxG_ACS_DIV2 |\ ORxG_SCY_3_CLK | ORxG_TRLX ) +/* Board FPGA on CS4 initialization values +*/ +#define CONFIG_SYS_FPGA_BASE 0x40000000 +#define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/ + +#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_FPGA_BASE & BRx_BA_MSK) |\ + BRx_PS_8 | BRx_MS_GPCM_P | BRx_V) + +#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FPGA_SIZE << 10) |\ + ORxG_CSNT | ORxG_ACS_DIV2 |\ + ORxG_SCY_3_CLK | ORxG_TRLX ) + /* CFG-Flash on CS5 initialization values */ #define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\ -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0

[U-Boot] [PATCH 05/31] powerpc: extract common config options for keymile boards.
by Heiko Schocher 28 Jan '09

28 Jan '09

This patch extracts common config options for keymile boards to the keymile-common.h file. Additionally FLASH_PROTECTION is added. Signed-off-by: Heiko Schocher <hs(a)denx.de> --- include/configs/keymile-common.h | 84 ++++++++++++++++++++++++++++++++++++++ include/configs/kmeter1.h | 58 ++++++++------------------ include/configs/mgcoge.h | 56 ++++++++++--------------- include/configs/mgsuvd.h | 44 ++++++++------------ 4 files changed, 141 insertions(+), 101 deletions(-) diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index d70bc48..28cdf76 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -102,6 +102,8 @@ #define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ #define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ +#define CONFIG_SYS_FLASH_PROTECTION 1 + /* * BOOTP options */ @@ -110,4 +112,86 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_KM_DEF_ENV \ + "netdev=eth0\0" \ + "baudrate=115200\0" \ + "u-boot_addr_r=100000\0" \ + "kernel_addr_r=200000\0" \ + "fdt_addr_r=600000\0" \ + "ram_ws=800000 \0" \ + "autoscr_ws=780000 \0" \ + "fdt_file=" xstr(CONFIG_HOSTNAME) "/" \ + xstr(CONFIG_HOSTNAME) ".dtb\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \ + "kernel_file=" xstr(CONFIG_HOSTNAME) "/uImage \0" \ + "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ + "update=protect off " xstr(BOOTFLASH_START) " +${filesize};" \ + "erase " xstr(BOOTFLASH_START) " +${filesize};" \ + "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) \ + " ${filesize};" \ + "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addboardid=setenv bootargs ${bootargs} " \ + "hwKey=${IVM_HWKey} boardId=0x${IVM_BoardId} \0" \ + "net_nfs=tftp ${kernel_addr_r} ${kernel_file}; " \ + "tftp ${fdt_addr_r} ${fdt_file}; " \ + "run nfsargs addip addcon;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "net_self=tftp ${kernel_addr_r} ${kernel_file}; " \ + "tftp ${fdt_addr_r} ${fdt_file}; " \ + "tftp ${ramdisk_addr} ${ramdisk_file}; " \ + "run ramargs addip; " \ + "bootm ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r}\0"\ + "flash_nfs=run nfsargs addip addcon;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "flash_self=run ramargs addip addcon;" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "bootcmd=run mtdargs addip addcon addboardid addpram; " \ + "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \0" \ + "altbootcmd=run altmtdargs addip addcon addboardid addpram; " \ + "bootm ${backup_kernel_addr} - ${backup_fdt_addr} \0" \ + "actual0=setenv actual_bank 0; setenv actual_kernel_addr " \ + "${bank0_kernel_addr}; " \ + "setenv actual_fdt_addr ${bank0_fdt_addr}; " \ + "setenv actual_rootfs ${bank0_rootfs} \0" \ + "actual1=setenv actual_bank 1; setenv actual_kernel_addr " \ + "${bank1_kernel_addr}; " \ + "setenv actual_fdt_addr ${bank1_fdt_addr}; " \ + "setenv actual_rootfs ${bank1_rootfs} \0" \ + "backup0=setenv backup_bank 0; setenv backup_kernel_addr " \ + "${bank0_kernel_addr}; " \ + "setenv backup_fdt_addr ${bank0_fdt_addr}; " \ + "setenv backup_rootfs ${bank0_rootfs} \0" \ + "backup1=setenv backup_bank 1; setenv backup_kernel_addr " \ + "${bank1_kernel_addr}; " \ + "setenv backup_fdt_addr ${bank1_fdt_addr}; " \ + "setenv backup_rootfs ${bank1_rootfs} \0" \ + "setbank0=run actual0 backup1 \0" \ + "setbank1=run actual1 backup0 \0" \ + "release=setenv bootcmd \'run mtdargs addip addcon addboardid;" \ + "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ + "saveenv \0" \ + "develop=setenv bootcmd \'run nfsargs addip addcon addboardid;" \ + "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ + "saveenv \0" \ + "developall=setenv bootcmd \'run load_fdt load_kernel nfsargs " \ + "addip addcon addboardid; " \ + "bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; " \ + "saveenv \0" \ + "new_esw_script=new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \ + "new_esw=tftp ${autoscr_ws} ${new_esw_script}; " \ + "iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0" \ + "bootlimit=0 \0" \ + "" + + #endif /* __CONFIG_KEYMILE_H */ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 25b1c17..7b78a82 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -28,6 +28,7 @@ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ #define CONFIG_KMETER1 1 /* KMETER1 board specific */ +#define CONFIG_HOSTNAME kmeter1 /* include common defines/options for all Keymile boards */ #include "keymile-common.h" @@ -405,53 +406,30 @@ * Environment Configuration */ #define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_UEC_ETH) -#define CONFIG_HAS_ETH0 +#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ +#define CONFIG_KM_DEF_ENV "km-common=empty\0" #endif +#define BOOTFLASH_START F0000000 + #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ + CONFIG_KM_DEF_ENV \ "rootpath=/opt/eldk/ppc_82xx\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttyS0,${baudrate}\0" \ - "fdt_addr=f0080000\0" \ - "kernel_addr=f00a0000\0" \ - "ramdisk_addr=f03a0000\0" \ - "kernel_addr_r=400000\0" \ - "fdt_addr_r=800000\0" \ - "ramdisk_addr_r=810000\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${boot_file}; " \ - "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "fdt_file=/tftpboot/kmeter1/kmeter1.dtb\0" \ - "boot_file=/tftpboot/kmeter1/uImage\0" \ + "addcon=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ "ramdisk_file=/tftpboot/kmeter1/uRamdisk\0" \ - "u-boot=/tftpboot/kmeter1/u-boot.bin\0" \ - "loadaddr=" MK_STR(CONFIG_SYS_LOAD_ADDR) "\0" \ - "load=tftp $loadaddr ${u-boot}\0" \ - "update=protect off " MK_STR(TEXT_BASE) " +$filesize;" \ - "erase " MK_STR(TEXT_BASE) " +$filesize;" \ - "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize;" \ - "protect on " MK_STR(TEXT_BASE) " +$filesize;" \ - "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize;" \ - "setenv filesize;saveenv\0" \ - "upd=run load update\0" \ "loadram=tftp ${ramdisk_addr_r} ${ramdisk_file}\0" \ "loadfdt=tftp ${fdt_addr_r} ${fdt_file}\0" \ - "loadkernel=tftp ${kernel_addr_r} ${boot_file}\0" \ + "loadkernel=tftp ${kernel_addr_r} ${bootfile}\0" \ "unlock=yes\0" \ - "" + "fdt_addr=F0080000\0" \ + "kernel_addr=F00a0000\0" \ + "ramdisk_addr=F03a0000\0" \ + "ramdisk_addr_r=F10000\0" \ + "" + + +#if defined(CONFIG_UEC_ETH) +#define CONFIG_HAS_ETH0 +#endif #endif /* __CONFIG_H */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index ddb06aa..12be62a 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -32,6 +32,7 @@ #define CONFIG_MPC8247 1 #define CONFIG_MPC8272_FAMILY 1 #define CONFIG_MGCOGE 1 +#define CONFIG_HOSTNAME mgcoge #define CONFIG_CPM2 1 /* Has a CPM2 */ @@ -75,40 +76,27 @@ #define CONFIG_8260_CLKIN 66000000 /* in Hz */ #endif -/* - * Default environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "u-boot_addr=100000\0" \ - "kernel_addr=200000\0" \ - "fdt_addr=400000\0" \ - "rootpath=/opt/eldk-4.2/ppc_82xx\0" \ - "u-boot=/tftpboot/mgcoge/u-boot.bin\0" \ - "bootfile=/tftpboot/mgcoge/uImage\0" \ - "fdt_file=/tftpboot/mgcoge/mgcoge.dtb\0" \ - "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fe000000 fe03ffff; era fe000000 fe03ffff; " \ - "cp.b ${u-boot_addr} fe000000 ${filesize};" \ - "prot on fe000000 fe03ffff\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off panic=1\0" \ - "net_nfs=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_self=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; " \ - "tftp ${ramdisk_addr} ${ramdisk_file}; " \ - "run ramargs addip; " \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "" +#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ +#define CONFIG_KM_DEF_ENV "km-common=empty\0" +#endif +#define BOOTFLASH_START FE000000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + "rootpath=/opt/eldk/ppc_82xx\0" \ + "addcon=setenv bootargs ${bootargs} " \ + "console=ttyCPM0,${baudrate}\0" \ + "tftpsrcp=69\0" \ + "tftpdstp=69\0" \ + "mtdids=nor0=boot,nor1=app \0" \ + "mtdparts=mtdparts=boot:384k(u-boot),128k(env),128k(envred)," \ + "3456k(free);app:3m(esw0),10m(rootfs0),3m(esw1)," \ + "10m(rootfs1),1m(var),5m(cfg) \0" \ + "partition=nor1,5 \0" \ + "new_env=prot off FE060000 FE09FFFF; era FE060000 FE09FFFF \0" \ + "" + #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_FLASH_BASE 0xFE000000 #define CONFIG_SYS_FLASH_SIZE 32 @@ -127,7 +115,7 @@ #define CONFIG_SYS_RAMBOOT #endif -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256KB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384KB for Monitor */ #define CONFIG_ENV_IS_IN_FLASH diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h index 698f0e7..ee1da02 100644 --- a/include/configs/mgsuvd.h +++ b/include/configs/mgsuvd.h @@ -35,6 +35,7 @@ #define CONFIG_MPC866 1 /* This is a MPC866 CPU */ #define CONFIG_MGSUVD 1 /* ...on a mgsuvd board */ +#define CONFIG_HOSTNAME mgsuvd /* include common defines/options for all Keymile boards */ #include "keymile-common.h" @@ -53,34 +54,23 @@ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "rootpath=/opt/eldk/ppc_8xx\0" \ - "bootfile=/tftpboot/mgsuvd/uImage\0" \ - "fdt_addr=400000\0" \ - "kernel_addr=200000\0" \ - "fdt_file=/tftpboot/mgsuvd/mgsuvd.dtb\0" \ - "load=tftp 200000 ${u-boot}\0" \ - "update=protect off f0000000 +${filesize};" \ - "erase f0000000 +${filesize};" \ - "cp.b 200000 f0000000 ${filesize};" \ - "protect on f0000000 +${filesize}\0" \ +#define BOOTFLASH_START F0000000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "addcon=setenv bootargs ${bootargs} " \ + "console=ttyCPM0,${baudrate}\0" \ + "tftpsrcp=69\0" \ + "tftpdstp=69\0" \ + "mtdids=nor0=app \0" \ + "mtdparts=mtdparts=app:256k(u-boot),128k(env),128k(envred)," \ + "256k(free),1536k(esw0),8704k(rootfs0),1536k(esw1)," \ + "2432k(rootfs1),640k(var),768k(cfg)\0" \ + "partition=nor0,9 \0" \ + "new_env=prot off F0040000 F007FFFF; era F0040000 F007FFFF \0" \ "" - + #undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */ #define CONFIG_TIMESTAMP /* but print image timestmps */ -- 1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

1 0