August 2008 - U-Boot

[U-Boot] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git
by Stefan Roese 11 Aug '08

11 Aug '08

The following changes since commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c: Jean-Christophe PLAGNIOL-VILLARD (1): drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros are available in the git repository at: git://www.denx.de/git/u-boot-ppc4xx.git master Steven A. Falco (1): ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic. board/amcc/sequoia/sequoia.c | 5 +++++ include/configs/sequoia.h | 12 ++++++------ 2 files changed, 11 insertions(+), 6 deletions(-)

2 1

[U-Boot-Users] [PATCH] Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
by Steven A. Falco 11 Aug '08

11 Aug '08

The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO configuration to match the schematic, and also sets the sdr0_pfc1 register to select the corresponding mode for the UARTs. board/amcc/sequoia/sequoia.c | 5 +++++ include/configs/sequoia.h | 12 ++++++------ 2 files changed, 11 insertions(+), 6 deletions(-) Signed-off-by: Steven A. Falco <sfalco(a)harris.com> diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 6bcb3ab..6ee9c88 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -93,6 +93,11 @@ int board_early_init_f(void) #ifdef CONFIG_I2C_MULTI_BUS sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL); #endif + /* Two UARTs, so we need 4-pin mode. Also, we want CTS/RTS mode. */ + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS; + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_CTS_RTS; + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_CTS_RTS; + mfsdr(SDR0_PFC2, sdr0_pfc2); sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4; diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 555316f..d129a58 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -544,12 +544,12 @@ /* GPIO Core 1 */ \ {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ -{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_8PIN_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_CTS_N EBC_DATA(0) UART3_SIN*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_8PIN_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_8PIN_RI_N UART1_SIN */ \ {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ -- 1.5.5.1

3 4

[U-Boot] [PATCH 1/2] video: fix bug in logo_plot
by Anatolij Gustschin 11 Aug '08

11 Aug '08

If logo_plot() should ever be called with x starting position other than zero and for pixel depths greater than 8bpp, logo colors distortion will be observed. This patch fixes the issue. Signed-off-by: Anatolij Gustschin <agust(a)denx.de> --- drivers/video/cfb_console.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 68b9861..97a37ba 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -1071,7 +1071,9 @@ void logo_plot (void *screen, int width, int x, int y) int ycount = VIDEO_LOGO_HEIGHT; unsigned char r, g, b, *logo_red, *logo_blue, *logo_green; unsigned char *source; - unsigned char *dest = (unsigned char *)screen + ((y * width * VIDEO_PIXEL_SIZE) + x); + unsigned char *dest = (unsigned char *)screen + + ((y * width * VIDEO_PIXEL_SIZE) + + x * VIDEO_PIXEL_SIZE); #ifdef CONFIG_VIDEO_BMP_LOGO source = bmp_logo_bitmap; -- 1.5.4.3

3 5

[U-Boot-Users] [PATCH 1/2] Minor fix for maintainer list by sorting of name
by Roy Zang 11 Aug '08

11 Aug '08

From: Roy Zang <tie-fei.zang(a)freescale.com> Minor fix for maintainer list by sorting of name Signed-off-by: Roy Zang <tie-fei.zang(a)freescale.com> --- Wolfgang Just done by your suggested. Roy MAINTAINERS | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index cbe5c47..921ccec 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -239,6 +239,10 @@ The LEOX team <team(a)leox.org> ELPT860 MPC860T +Guennadi Liakhovetski <g.liakhovetski(a)gmx.de> + + linkstation MPC8241 + Dave Liu <daveliu(a)freescale.com> MPC8315ERDB MPC8315 @@ -416,10 +420,6 @@ John Zhan <zhanz(a)sinovee.com> svm_sc8xx MPC8xx -Guennadi Liakhovetski <g.liakhovetski(a)gmx.de> - - linkstation MPC8241 - ------------------------------------------------------------------------- Unknown / orphaned boards: -- 1.5.4

2 1

Re: [U-Boot] [PATCH] Add mpc7448hpc2 maintainer information for future maintained
by Wolfgang Denk 11 Aug '08

11 Aug '08

Dear Roy Zang, In message <1218107584.975.3.camel(a)rock.ap.freescale.net> you wrote: > > It seems that I shoule be added before John Zhang according to the > "name" list. Indeed. > Could you help to adjust. Done. > Guennadi Liakhovetski (last one) also has the wrong place accroding to > name. > > You can ajust both :-). I did. And some more. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de "Intelligence without character is a dangerous thing." - G. Steinem

1 0

[U-Boot-Users] [PATCH] Add mpc7448hpc2 maintainer information for future maintained
by Roy Zang 11 Aug '08

11 Aug '08

From: Roy Zang <tie-fei.zang(a)freescale.com> Add mpc7448hpc2 maintainer information for future maintained. Signed-off-by: Roy Zang <tie-fei.zang(a)freescale.com> --- MAINTAINERS | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index cbe5c47..2e58ee4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -420,6 +420,10 @@ Guennadi Liakhovetski <g.liakhovetski(a)gmx.de> linkstation MPC8241 +Roy Zang <tie-fei.zang(a)freescale.com> + + mpc7448hpc2 MPC7448 + ------------------------------------------------------------------------- Unknown / orphaned boards: -- 1.5.4

2 1

[U-Boot-Users] [PATCH] common/cmd_load.c - Minor Code Style update & code cleanup
by Gururaja Hebbar K R 11 Aug '08

11 Aug '08

- os_data_header Variable is a carry over feature & unused. So removed all instance of this variable - Minor Code Style Update Signed-off-by: Gururaja Hebbar <gururajakr(a)sanyo.co.in> --- common/cmd_load.c | 15 ++++++++------- 1 files changed, 8 insertions(+), 7 deletions(-) diff --git a/common/cmd_load.c b/common/cmd_load.c index 1b75a7b..ab167f5 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -424,7 +424,6 @@ write_record (char *buf) #define untochar(x) ((int) (((x) - SPACE) & 0xff)) extern int os_data_count; -extern int os_data_header[8]; static void set_kerm_bin_mode(unsigned long *); static int k_recv(void); @@ -631,11 +630,6 @@ void send_nack (int n) } -/* os_data_* takes an OS Open image and puts it into memory, and - puts the boot header in an array named os_data_header - - if image is binary, no header is stored in os_data_header. -*/ void (*os_data_init) (void); void (*os_data_char) (char new_char); static int os_data_state, os_data_state_saved; @@ -643,25 +637,28 @@ int os_data_count; static int os_data_count_saved; static char *os_data_addr, *os_data_addr_saved; static char *bin_start_address; -int os_data_header[8]; + static void bin_data_init (void) { os_data_state = 0; os_data_count = 0; os_data_addr = bin_start_address; } + static void os_data_save (void) { os_data_state_saved = os_data_state; os_data_count_saved = os_data_count; os_data_addr_saved = os_data_addr; } + static void os_data_restore (void) { os_data_state = os_data_state_saved; os_data_count = os_data_count_saved; os_data_addr = os_data_addr_saved; } + static void bin_data_char (char new_char) { switch (os_data_state) { @@ -671,6 +668,7 @@ static void bin_data_char (char new_char) break; } } + static void set_kerm_bin_mode (unsigned long *addr) { bin_start_address = (char *) addr; @@ -686,16 +684,19 @@ void k_data_init (void) k_data_escape = 0; os_data_init (); } + void k_data_save (void) { k_data_escape_saved = k_data_escape; os_data_save (); } + void k_data_restore (void) { k_data_escape = k_data_escape_saved; os_data_restore (); } + void k_data_char (char new_char) { if (k_data_escape) { -- 1.5.6.4

3 2

[U-Boot-Users] [PATCH] Update the U-Boot wiki URL.
by Magnus Lilja 11 Aug '08

11 Aug '08

Signed-off-by: Magnus Lilja <lilja.magnus(a)gmail.com> --- README | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/README b/README index 0cd01bc..d4456e5 100644 --- a/README +++ b/README @@ -98,7 +98,7 @@ Where we come from: - create ARMBoot project (http://sourceforge.net/projects/armboot) - add other CPU families (starting with ARM) - create U-Boot project (http://sourceforge.net/projects/u-boot) -- current project page: see http://www.denx.de/wiki/UBoot +- current project page: see http://www.denx.de/wiki/U-Boot Names and Spelling: @@ -3903,7 +3903,7 @@ may be rejected, even when they contain important and valuable stuff. Patches shall be sent to the u-boot-users mailing list. -Please see http://www.denx.de/wiki/UBoot/Patches for details. +Please see http://www.denx.de/wiki/U-Boot/Patches for details. When you send a patch, please include the following information with it: -- 1.5.2.4

2 1

[U-Boot] [RFC][PATCH] OneNAND: Remove base address offset usage
by dirk.behme＠googlemail.com 10 Aug '08

10 Aug '08

While locally preparing some U-Boot patches for ARM based OMAP3 boards, some using OneNAND and some using NAND, we found some differences in OneNAND and NAND command address handling. As this might confuse users (it already confused us), we like to align OneNAND and NAND address handling. The issue is that cmd_onenand.c subtracts the onenand base address from the addresses you type into the u-boot command line so, unlike nand, you can't use addresses relative to the start of the onenand part e.g. this won't work: onenand read 82000000 280000 400000 you have to use: onenand read 82000000 20280000 400000 Looking at recent git, the only board currently using OneNAND is Apollon, and for this the OneNAND base address is 0 (apollon.h) #define CFG_ONENAND_BASE 0x00000000 so patch below won't break any existing boards and will align OneNAND and NAND handling on boards where OneNAND base address is != 0. Signed-off-by: Steve Sakoman <sakoman(a)gmail.com> Signed-off-by: Manikandan Pillai <mani.pillai(a)ti.com> Signed-off-by: Dirk Behme <dirk.behme(a)gmail.com> --- Index: foo/common/cmd_onenand.c =================================================================== --- foo.orig/common/cmd_onenand.c +++ foo/common/cmd_onenand.c @@ -58,8 +58,6 @@ int do_onenand(cmd_tbl_t * cmdtp, int fl } else { start = simple_strtoul(argv[2], NULL, 10); end = simple_strtoul(argv[3], NULL, 10); - start -= (unsigned long)onenand_chip.base; - end -= (unsigned long)onenand_chip.base; start >>= onenand_chip.erase_shift; end >>= onenand_chip.erase_shift; @@ -92,8 +90,6 @@ int do_onenand(cmd_tbl_t * cmdtp, int fl size_t retlen = 0; int oob = strncmp(argv[1], "read.oob", 8) ? 0 : 1; - ofs -= (unsigned long)onenand_chip.base; - if (oob) onenand_read_oob(&onenand_mtd, ofs, len, &retlen, (u_char *) addr); @@ -111,8 +107,6 @@ int do_onenand(cmd_tbl_t * cmdtp, int fl size_t len = simple_strtoul(argv[4], NULL, 16); size_t retlen = 0; - ofs -= (unsigned long)onenand_chip.base; - onenand_write(&onenand_mtd, ofs, len, &retlen, (u_char *) addr); printf("Done\n"); Index: foo/common/env_onenand.c =================================================================== --- foo.orig/common/env_onenand.c +++ foo/common/env_onenand.c @@ -66,7 +66,6 @@ void env_relocate_spec(void) size_t retlen; env_addr = CFG_ENV_ADDR; - env_addr -= (unsigned long) onenand_chip.base; /* Check OneNAND exist */ if (onenand_mtd.oobblock) @@ -101,7 +100,6 @@ int saveenv(void) instr.len = CFG_ENV_SIZE; instr.addr = env_addr; - instr.addr -= (unsigned long)onenand_chip.base; if (onenand_erase(&onenand_mtd, &instr)) { printf("OneNAND: erase failed at 0x%08lx\n", env_addr); return 1; @@ -111,7 +109,6 @@ int saveenv(void) env_ptr->crc = crc32(0, env_ptr->data, ONENAND_ENV_SIZE(onenand_mtd)); - env_addr -= (unsigned long)onenand_chip.base; if (onenand_write(&onenand_mtd, env_addr, onenand_mtd.oobblock, &retlen, (u_char *) env_ptr)) { printf("OneNAND: write failed at 0x%08x\n", instr.addr);

2 1

[U-Boot-Users] [PATCH v2][for 1.3.4] mpc85xx: workaround old binutils bug
by Kumar Gala 10 Aug '08

10 Aug '08

The recent change to move the .bss outside of the image gives older binutils (ld from eldk4.1/binutils-2.16) some headache: ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4) ppc_85xx-ld: final link failed: Bad value We workaround it by being explicit about the program headers and not assigning the .bss to a program header. Signed-off-by: Kumar Gala <galak(a)kernel.crashing.org> --- Fixes warning with older binutils board/freescale/mpc8540ads/u-boot.lds | 16 +++++++++++----- board/freescale/mpc8541cds/u-boot.lds | 16 +++++++++++----- board/freescale/mpc8544ds/u-boot.lds | 16 +++++++++++----- board/freescale/mpc8548cds/u-boot.lds | 16 +++++++++++----- board/freescale/mpc8555cds/u-boot.lds | 16 +++++++++++----- board/freescale/mpc8560ads/u-boot.lds | 16 +++++++++++----- board/freescale/mpc8568mds/u-boot.lds | 16 +++++++++++----- 7 files changed, 77 insertions(+), 35 deletions(-) diff --git a/board/freescale/mpc8540ads/u-boot.lds b/board/freescale/mpc8540ads/u-boot.lds index 0e4f5a2..515d320 100644 --- a/board/freescale/mpc8540ads/u-boot.lds +++ b/board/freescale/mpc8540ads/u-boot.lds @@ -26,6 +26,12 @@ OUTPUT_ARCH(powerpc) /* Do we need any of these for elf? __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + SECTIONS { /* Read-only sections, merged into text segment: */ @@ -57,7 +63,7 @@ SECTIONS *(.text) *(.fixup) *(.got1) - } + } :text _etext = .; PROVIDE (etext = .); .rodata : @@ -66,7 +72,7 @@ SECTIONS *(.rodata1) *(.rodata.str1.4) *(.eh_frame) - } + } :text .fini : { *(.fini) } =0 .ctors : { *(.ctors) } .dtors : { *(.dtors) } @@ -118,12 +124,12 @@ SECTIONS .bootpg ADDR(.text) + 0x7f000 : { cpu/mpc85xx/start.o (.bootpg) - } = 0xffff + } :text = 0xffff .resetvec ADDR(.text) + 0x7fffc : { *(.resetvec) - } = 0xffff + } :text = 0xffff . = ADDR(.text) + 0x80000; @@ -134,7 +140,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) - } + } :bss . = ALIGN(4); _end = . ; diff --git a/board/freescale/mpc8541cds/u-boot.lds b/board/freescale/mpc8541cds/u-boot.lds index 1c583de..d728d8b 100644 --- a/board/freescale/mpc8541cds/u-boot.lds +++ b/board/freescale/mpc8541cds/u-boot.lds @@ -23,6 +23,12 @@ OUTPUT_ARCH(powerpc) /* Do we need any of these for elf? __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + SECTIONS { /* Read-only sections, merged into text segment: */ @@ -54,7 +60,7 @@ SECTIONS *(.text) *(.fixup) *(.got1) - } + } :text _etext = .; PROVIDE (etext = .); .rodata : @@ -63,7 +69,7 @@ SECTIONS *(.rodata1) *(.rodata.str1.4) *(.eh_frame) - } + } :text .fini : { *(.fini) } =0 .ctors : { *(.ctors) } .dtors : { *(.dtors) } @@ -115,12 +121,12 @@ SECTIONS .bootpg ADDR(.text) + 0x7f000 : { cpu/mpc85xx/start.o (.bootpg) - } = 0xffff + } :text = 0xffff .resetvec ADDR(.text) + 0x7fffc : { *(.resetvec) - } = 0xffff + } :text = 0xffff . = ADDR(.text) + 0x80000; @@ -131,7 +137,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) - } + } :bss . = ALIGN(4); _end = . ; diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds index 500e647..a05ece5 100644 --- a/board/freescale/mpc8544ds/u-boot.lds +++ b/board/freescale/mpc8544ds/u-boot.lds @@ -23,6 +23,12 @@ OUTPUT_ARCH(powerpc) /* Do we need any of these for elf? __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + SECTIONS { /* Read-only sections, merged into text segment: */ @@ -54,7 +60,7 @@ SECTIONS *(.text) *(.fixup) *(.got1) - } + } :text _etext = .; PROVIDE (etext = .); .rodata : @@ -63,7 +69,7 @@ SECTIONS *(.rodata1) *(.rodata.str1.4) *(.eh_frame) - } + } :text .fini : { *(.fini) } =0 .ctors : { *(.ctors) } .dtors : { *(.dtors) } @@ -115,12 +121,12 @@ SECTIONS .bootpg ADDR(.text) + 0x7f000 : { cpu/mpc85xx/start.o (.bootpg) - } = 0xffff + } :text = 0xffff .resetvec ADDR(.text) + 0x7fffc : { *(.resetvec) - } = 0xffff + } :text = 0xffff . = ADDR(.text) + 0x80000; @@ -131,7 +137,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) - } + } :bss . = ALIGN(4); _end = . ; diff --git a/board/freescale/mpc8548cds/u-boot.lds b/board/freescale/mpc8548cds/u-boot.lds index 6b93395..d4a2f72 100644 --- a/board/freescale/mpc8548cds/u-boot.lds +++ b/board/freescale/mpc8548cds/u-boot.lds @@ -23,6 +23,12 @@ OUTPUT_ARCH(powerpc) /* Do we need any of these for elf? __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + SECTIONS { /* Read-only sections, merged into text segment: */ @@ -54,7 +60,7 @@ SECTIONS *(.text) *(.fixup) *(.got1) - } + } :text _etext = .; PROVIDE (etext = .); .rodata : @@ -63,7 +69,7 @@ SECTIONS *(.rodata1) *(.rodata.str1.4) *(.eh_frame) - } + } :text .fini : { *(.fini) } =0 .ctors : { *(.ctors) } .dtors : { *(.dtors) } @@ -115,12 +121,12 @@ SECTIONS .bootpg ADDR(.text) + 0x7f000 : { cpu/mpc85xx/start.o (.bootpg) - } = 0xffff + } :text = 0xffff .resetvec ADDR(.text) + 0x7fffc : { *(.resetvec) - } = 0xffff + } :text = 0xffff . = ADDR(.text) + 0x80000; @@ -131,7 +137,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) - } + } :bss . = ALIGN(4); _end = . ; diff --git a/board/freescale/mpc8555cds/u-boot.lds b/board/freescale/mpc8555cds/u-boot.lds index a18b3a7..11885e8 100644 --- a/board/freescale/mpc8555cds/u-boot.lds +++ b/board/freescale/mpc8555cds/u-boot.lds @@ -23,6 +23,12 @@ OUTPUT_ARCH(powerpc) /* Do we need any of these for elf? __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + SECTIONS { /* Read-only sections, merged into text segment: */ @@ -54,7 +60,7 @@ SECTIONS *(.text) *(.fixup) *(.got1) - } + } :text _etext = .; PROVIDE (etext = .); .rodata : @@ -63,7 +69,7 @@ SECTIONS *(.rodata1) *(.rodata.str1.4) *(.eh_frame) - } + } :text .fini : { *(.fini) } =0 .ctors : { *(.ctors) } .dtors : { *(.dtors) } @@ -115,12 +121,12 @@ SECTIONS .bootpg ADDR(.text) + 0x7f000 : { cpu/mpc85xx/start.o (.bootpg) - } = 0xffff + } :text = 0xffff .resetvec ADDR(.text) + 0x7fffc : { *(.resetvec) - } = 0xffff + } :text = 0xffff . = ADDR(.text) + 0x80000; @@ -131,7 +137,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) - } + } :bss . = ALIGN(4); _end = . ; diff --git a/board/freescale/mpc8560ads/u-boot.lds b/board/freescale/mpc8560ads/u-boot.lds index 0e4f5a2..515d320 100644 --- a/board/freescale/mpc8560ads/u-boot.lds +++ b/board/freescale/mpc8560ads/u-boot.lds @@ -26,6 +26,12 @@ OUTPUT_ARCH(powerpc) /* Do we need any of these for elf? __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + SECTIONS { /* Read-only sections, merged into text segment: */ @@ -57,7 +63,7 @@ SECTIONS *(.text) *(.fixup) *(.got1) - } + } :text _etext = .; PROVIDE (etext = .); .rodata : @@ -66,7 +72,7 @@ SECTIONS *(.rodata1) *(.rodata.str1.4) *(.eh_frame) - } + } :text .fini : { *(.fini) } =0 .ctors : { *(.ctors) } .dtors : { *(.dtors) } @@ -118,12 +124,12 @@ SECTIONS .bootpg ADDR(.text) + 0x7f000 : { cpu/mpc85xx/start.o (.bootpg) - } = 0xffff + } :text = 0xffff .resetvec ADDR(.text) + 0x7fffc : { *(.resetvec) - } = 0xffff + } :text = 0xffff . = ADDR(.text) + 0x80000; @@ -134,7 +140,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) - } + } :bss . = ALIGN(4); _end = . ; diff --git a/board/freescale/mpc8568mds/u-boot.lds b/board/freescale/mpc8568mds/u-boot.lds index 9d245e4..ad96410 100644 --- a/board/freescale/mpc8568mds/u-boot.lds +++ b/board/freescale/mpc8568mds/u-boot.lds @@ -23,6 +23,12 @@ OUTPUT_ARCH(powerpc) /* Do we need any of these for elf? __DYNAMIC = 0; */ +PHDRS +{ + text PT_LOAD; + bss PT_LOAD; +} + SECTIONS { /* Read-only sections, merged into text segment: */ @@ -54,7 +60,7 @@ SECTIONS *(.text) *(.fixup) *(.got1) - } + } :text _etext = .; PROVIDE (etext = .); .rodata : @@ -63,7 +69,7 @@ SECTIONS *(.rodata1) *(.rodata.str1.4) *(.eh_frame) - } + } :text .fini : { *(.fini) } =0 .ctors : { *(.ctors) } .dtors : { *(.dtors) } @@ -115,12 +121,12 @@ SECTIONS .bootpg ADDR(.text) + 0x7f000 : { cpu/mpc85xx/start.o (.bootpg) - } = 0xffff + } :text = 0xffff .resetvec ADDR(.text) + 0x7fffc : { *(.resetvec) - } = 0xffff + } :text = 0xffff . = ADDR(.text) + 0x80000; @@ -131,7 +137,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) - } + } :bss . = ALIGN(4); _end = . ; -- 1.5.5.1

4 3