June 2007 - U-Boot

[U-Boot-Users] [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
by Benoit Monin 08 Jun '07

08 Jun '07

Set the correct value in GPIOx_TCR when configuring the gpio with CFG_440_GPIO_TABLE. Signed-off-by: Benoît Monin <bmonin <at> adeneo.eu> --- cpu/ppc4xx/gpio.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) The attached patch is against current git. -- Créez votre adresse électronique prenom.nom(a)laposte.net 1 Go d'espace de stockage, anti-spam et anti-virus intégrés.

2 1

[U-Boot-Users] Serial transfer using loads
by Midhun Agnihotram 08 Jun '07

08 Jun '07

Hi All, I am using C-Kermit to communicate with my board. I have tried to transfer a over the serial prompt. But the syntax of loads looks weird. loads [ off ] - load S-Record file over serial line with offset 'off' So where so we specify the file name?? When I type in loads, the following appears: ## Ready for S-Record download ... This is fine. But then I am not able to type the filename ( In the manual - "Hello World" example, "~>examples/hello_world.srec" appears after the above line. Where does it come from? ) Where do we specify the filename?? Thanks & Regards, Midhun Agnihotram, Ahmedabad 382481. India. Mob: +91-9979509691

2 2

[U-Boot-Users] [GIT PULL] Please pull from git://www.denx.de/git/u-boot-net.git
by Ben Warren 08 Jun '07

08 Jun '07

Wolfgang, The following changes since commit c0c292b2852a12e9d93e99b3aaf5b0dac5f36fdc: Wolfgang Denk (1): Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx are found in the git repository at: git://www.denx.de/git/u-boot-net.git Vadim Bendebury (1): cosmetic changes to bcm570x driver drivers/bcm570x.c | 2324 ++++++------- drivers/bcm570x_lm.h | 207 +- drivers/bcm570x_mm.h | 58 +- drivers/tigon3.c | 9698 ++++++++++++++++++++++++-------------------------- drivers/tigon3.h | 3759 ++++++++++---------- 5 files changed, 7673 insertions(+), 8373 deletions(-) ---- regards, Ben

2 1

[U-Boot-Users] [ERR] U-Boot-Users Digest, Vol 13, Issue 24
by postmaster＠paran.com 07 Jun '07

07 Jun '07

Transmit Report: To: jaagar(a)paran.com, 2007/06/08 04:19:26, 451, Requested action aborted: No failover server To: kmkh12(a)paran.com, 2007/06/08 04:19:03, 451, Requested action aborted: No failover server

1 0

[U-Boot-Users] [PATCH] Add nand support on KB9202
by christian＠kwikbyte.com 07 Jun '07

07 Jun '07

Add NAND support on KB9202 boards. Signed-off by: christian(a)kwikbyte.com

1 0

[U-Boot-Users] PCI issue in MPC8548E with OHCI controller
by reckless 07 Jun '07

07 Jun '07

Hi I am using the ISP1562 on my PCI and using the OHCI code. I am able to reset and initialize the controller as i am able to see the reset signal and High speed chirp signal on the bus but there is no data on the bus. It shows the invalid packet on with all 0xFF at the first time i connect the mass storage device what could be the problem ? How i have to map the PCI memory ? I though that it could be the invalid memory access as i am taking the gohci and hcca structure by just taking it as an array and the controller HcHcca registers are unable to access that location it 0x7ffa0000 in my case where my PCI memory is mapped at 0x80000000 Need some help Regards -- View this message in context: http://www.nabble.com/PCI-issue-in-MPC8548E-with-OHCI-controller-tf3885671.… Sent from the Uboot - Users mailing list archive at Nabble.com.

1 0

[U-Boot-Users] u-boot for MPC8548
by Rupesh S 07 Jun '07

07 Jun '07

Hi Does u-boot support any evaluation boards based on the MPC8548 processor ? Thanks in advance -- Rupesh S

2 1

[U-Boot-Users] PCI OHCI / testing-USB branch
by Matthias Fuchs 07 Jun '07

07 Jun '07

Hi, is someone currently working on the testing-USB branch? Does it contain the most up to date USB code? I have to add support for a PCI OHCI controller on a 405 board. This will result in some modifications (endianess + bus offsets) of drivers/usb_ohci.c. Is someone else using a PCI OHCI controller on a board that I might have missed to check? Matthias

4 6

[U-Boot-Users] unable to get the data on the USB Bus
by recklinux＠gmail.com 07 Jun '07

07 Jun '07

Hi I am using the ISP1562 on my PCI and using the OHCI code. I am able to reset and initialize the controller as i am able to see the reset signal and High speed chirp signal on the bus but there is no data on the bus. It shows the invalid packet on with all 0xFF at the first time i connect the mass storage device what could be the problem ? How i have to map the PCI memory ? I though that it could be the invalid memory access as i am taking the gohci and hcca structure by just taking it as an array and the controller HcHcca registers are unable to access that location it 0x7ffa0000 in my case where my PCI memor is mapped at 0x80000000 Need some help Regards

1 0

[U-Boot-Users] Arithmetic expansion from shell
by Hemant Pedanekar 07 Jun '07

07 Jun '07

Hello all, I wanted to write a script which could parse file image header before booting. Initially we thought Hush script could do the job but it seems the arithmetic expansion is not supported with either the default command parser or the hush shell (no 'let' command either). Could you please confirm if this is correct? Also, if the above is correct, I am planning to write a bootstrap function/command (board specific code) with something like bootcmd=<bootsrap init cmd>; bootm Is this write approach? Thanks, Hemant.

2 2