December 2007 - U-Boot

[U-Boot-Users] [PATCH 8/9] Add configuration file for Korat board
by Larry Johnson 22 Dec '07

22 Dec '07

This patch supplies the configuration file for the Korat PPC440EPx- processor board. Signed-off-by: Larry Johnson <lrj(a)acm.org> --- include/configs/korat.h | 376 +++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 376 insertions(+), 0 deletions(-) create mode 100644 include/configs/korat.h diff --git a/include/configs/korat.h b/include/configs/korat.h new file mode 100644 index 0000000..1ea7d48 --- /dev/null +++ b/include/configs/korat.h @@ -0,0 +1,376 @@ +/* + * (C) Copyright 2007 + * Larry Johnson, lrj(a)acm.org + * + * (C) Copyright 2006-2007 + * Stefan Roese, DENX Software Engineering, sr(a)denx.de. + * + * (C) Copyright 2006 + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol(a)fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel(a)fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * korat.h - configuration for Korat board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_440EPX 1 /* Specific PPC440EPx */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33333333 + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +/*----------------------------------------------------------------------- + * Manufacturer's information serial EEPROM parameters + *----------------------------------------------------------------------*/ +#define MAN_DATA_EEPROM_ADDR 0x53 /* EEPROM I2C address */ +#define MAN_SERIAL_NO_FIELD 2 +#define MAN_SERIAL_NO_LENGTH 13 +#define MAN_MAC_ADDR_FIELD 3 +#define MAN_MAC_ADDR_LENGTH 17 + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ + +#define CFG_BOOT_BASE_ADDR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_OCM_BASE 0xe0010000 /* ocm */ +#define CFG_OCM_DATA_ADDR CFG_OCM_BASE +#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/* Don't change either of these */ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ + +#define CFG_USB2D0_BASE 0xe0000100 +#define CFG_USB_DEVICE 0xe0000000 +#define CFG_USB_HOST 0xe0000400 +#define CFG_CPLD_BASE 0xc0000000 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer + *----------------------------------------------------------------------*/ +/* 440EPx has 16KB of internal SRAM, so no need for D-Cache */ +#undef CFG_INIT_RAM_DCACHE +#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */ +#define CFG_INIT_RAM_END (4 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 +/* define this if you want console on UART1 */ +#undef CONFIG_UART1_CONSOLE + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environ vars */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CFG_MBYTES_SDRAM (512) /* 512 MiB TODO: remove */ +#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ +#define CONFIG_ZERO_SDRAM /* Zero SDRAM after setup */ +#define CONFIG_DDR_ECC /* Use ECC when available */ +#define SPD_EEPROM_ADDRESS {0x50} +#define CONFIG_PROG_SDRAM_TLB +#define CFG_DRAM_TEST + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0xa8>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C RTC */ +#define CONFIG_RTC_M41T60 1 +#define CFG_I2C_RTC_ADDR 0x68 + +/* I2C SYSMON (LM73) */ +#define CONFIG_DTT_LM73 1 /* National Semi's LM73 */ +#define CONFIG_DTT_SENSORS {2} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_MIN_TEMP -30 + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +/* Setup some board specific values for the default environment variables */ +#define CONFIG_HOSTNAME korat +#define CFG_BOOTFILE "bootfile=/tftpboot/korat/uImage\0" +#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CFG_BOOTFILE \ + CFG_ROOTPATH \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "kernel_addr=FC000000\0" \ + "ramdisk_addr=FC180000\0" \ + "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ + "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ + "cp.b 200000 FFFA0000 60000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */ +#define CONFIG_PHY_DYNAMIC_ANEG 1 + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +#define CONFIG_HAS_ETH0 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 3 + +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/* Comment this out to enable USB 1.1 device */ +#define USB_2_0_DEVICE + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_SUBNETMASK + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DTT +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_I2C_CMD_TREE +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_USB + +/* POST support */ +#define CONFIG_POST (CFG_POST_CACHE | \ + CFG_POST_CPU | \ + CFG_POST_ECC | \ + CFG_POST_ETHER | \ + CFG_POST_FPU | \ + CFG_POST_I2C | \ + CFG_POST_MEMORY | \ + CFG_POST_RTC | \ + CFG_POST_SPR | \ + CFG_POST_UART) + +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CONFIG_LOGBUFFER +#define CFG_POST_CACHE_ADDR 0xC8000000 /* free virtual address */ + +#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ + +#define CONFIG_SUPPORT_VFAT + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------*/ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ + +/* Board-specific PCI */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x04017300 +#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0x000DA000) + +/* Memory Bank 1 (NOR-FLASH) initialization */ +#define CFG_EBC_PB1AP 0x04017300 +#define CFG_EBC_PB1CR (0xF8000000 | 0x000DA000) + +/* Memory Bank 2 (CPLD) initialization */ +#define CFG_EBC_PB2AP 0x04017300 +#define CFG_EBC_PB2CR (CFG_CPLD_BASE | 0x00038000) + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ -- 1.5.2.5

1 0

[U-Boot-Users] [PATCH 7/9] Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
by Larry Johnson 22 Dec '07

22 Dec '07

Signed-off-by: Larry Johnson <lrj(a)acm.org> --- cpu/ppc4xx/Makefile | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index 9155e9a..178c5c6 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -43,6 +43,8 @@ COBJS += bedbug_405.o COBJS += commproc.o COBJS += cpu.o COBJS += cpu_init.o +COBJS += denali_data_eye.o +COBJS += denali_spd_ddr2.o COBJS += fdt.o COBJS += gpio.o COBJS += i2c.o -- 1.5.2.5

1 0

[U-Boot-Users] [PATCH 5/9] Copy 440EPx/GRx SDRAM data-eye search to common directory
by Larry Johnson 22 Dec '07

22 Dec '07

This patch creates a non-board-specific file for performing the SDRAM data-eye search. It also adds ECC error checking to the test of valid data on readback when ECC is enabled. Signed-off-by: Larry Johnson <lrj(a)acm.org> --- cpu/ppc4xx/denali_data_eye.c | 396 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 396 insertions(+), 0 deletions(-) create mode 100644 cpu/ppc4xx/denali_data_eye.c diff --git a/cpu/ppc4xx/denali_data_eye.c b/cpu/ppc4xx/denali_data_eye.c new file mode 100644 index 0000000..6c949a0 --- /dev/null +++ b/cpu/ppc4xx/denali_data_eye.c @@ -0,0 +1,396 @@ +/* + * cpu/ppc4xx/denali_data_eye.c + * Extracted from board/amcc/sequoia/sdram.c by Larry Johnson <lrj(a)acm.org>. + * + * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie(a)fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol(a)fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman(a)fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel(a)fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder(a)fr.ibm.com + * + * (C) Copyright 2006-2007 + * Stefan Roese, DENX Software Engineering, sr(a)denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include <common.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <ppc4xx.h> + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +/*-----------------------------------------------------------------------------+ + * denali_wait_for_dlllock. + +----------------------------------------------------------------------------*/ +int denali_wait_for_dlllock(void) +{ + u32 val; + int wait; + + /* -----------------------------------------------------------+ + * Wait for the DCC master delay line to finish calibration + * ----------------------------------------------------------*/ + for (wait = 0; wait != 0xffff; ++wait) { + mfsdram(DDR0_17, val); + if (DDR0_17_DLLLOCKREG_DECODE(val)) { + /* dlllockreg bit on */ + return 0; + } + } + debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val); + debug("Waiting for dlllockreg bit to raise\n"); + return -1; +} + +#if defined(CONFIG_DDR_DATA_EYE) +#define DDR_DCR_BASE 0x10 +#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */ +#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */ + +/*-----------------------------------------------------------------------------+ + * wait_for_dram_init_complete. + +----------------------------------------------------------------------------*/ +static int wait_for_dram_init_complete(void) +{ + unsigned long val; + int wait = 0; + + /* --------------------------------------------------------------+ + * Wait for 'DRAM initialization complete' bit in status register + * -------------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_00); + + while (wait != 0xffff) { + val = mfdcr(ddrcfgd); + if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6) + /* 'DRAM initialization complete' bit */ + return 0; + else + wait++; + } + debug("DRAM initialization complete bit in status register did not " + "rise\n"); + return -1; +} + +#define NUM_TRIES 64 +#define NUM_READS 10 + +/*-----------------------------------------------------------------------------+ + * denali_core_search_data_eye. + +----------------------------------------------------------------------------*/ +/* + * Avoid conflict with implementations of denali_core_search_data_eye in board- + * specific code. + */ +void denali_core_search_data_eye(void) + __attribute__ ((weak, alias("__denali_core_search_data_eye"))); + +void __denali_core_search_data_eye(void) +{ + int k, j; + u32 val; + u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X; + u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0; + u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0; + u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0; + volatile u32 *ram_pointer; + u32 test[NUM_TRIES] = { + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 + }; + + ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE); + + for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) { + /* for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) { */ + + /* -----------------------------------------------------------+ + * De-assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | + DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + /* -----------------------------------------------------------+ + * Set 'wr_dqs_shift' + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_09); + val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) | + DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift); + mtdcr(ddrcfgd, val); + + /* -----------------------------------------------------------+ + * Set 'dqs_out_shift' = wr_dqs_shift + 32 + * ----------------------------------------------------------*/ + dqs_out_shift = wr_dqs_shift + 32; + mtdcr(ddrcfga, DDR0_22); + val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) | + DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift); + mtdcr(ddrcfgd, val); + + passing_cases = 0; + + for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; + dll_dqs_delay_X++) { + /* for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; + dll_dqs_delay_X++) { */ + /* -----------------------------------------------------------+ + * Set 'dll_dqs_delay_X'. + * ----------------------------------------------------------*/ + /* dll_dqs_delay_0 */ + mtdcr(ddrcfga, DDR0_17); + val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK) + | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* dll_dqs_delay_1 to dll_dqs_delay_4 */ + mtdcr(ddrcfga, DDR0_18); + val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK) + | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* dll_dqs_delay_5 to dll_dqs_delay_8 */ + mtdcr(ddrcfga, DDR0_19); + val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK) + | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* clear any ECC errors */ + mtdcr(ddrcfga, DDR0_00); + mtdcr(ddrcfgd, + mfdcr(ddrcfgd) | DDR0_00_INT_ACK_ENCODE(0x3C)); + + sync(); + eieio(); + + /* -----------------------------------------------------------+ + * Assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | + DDR0_02_START_ON; + mtdcr(ddrcfgd, val); + + sync(); + eieio(); + + /* -----------------------------------------------------------+ + * Wait for the DCC master delay line to finish calibration + * ----------------------------------------------------------*/ + if (denali_wait_for_dlllock() != 0) { + printf("dll lock did not occur !!!\n"); + printf("denali_core_search_data_eye!!!\n"); + printf("wr_dqs_shift = %d - dll_dqs_delay_X = " + "%d\n", wr_dqs_shift, dll_dqs_delay_X); + hang(); + } + sync(); + eieio(); + + if (wait_for_dram_init_complete() != 0) { + printf("dram init complete did not occur!!!\n"); + printf("denali_core_search_data_eye!!!\n"); + printf("wr_dqs_shift = %d - dll_dqs_delay_X = " + "%d\n", wr_dqs_shift, dll_dqs_delay_X); + hang(); + } + udelay(100); /* wait 100us to ensure init is really completed !!! */ + + /* write values */ + for (j = 0; j < NUM_TRIES; j++) { + ram_pointer[j] = test[j]; + + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r"(&ram_pointer[j])); + } + + /* read values back */ + for (j = 0; j < NUM_TRIES; j++) { + for (k = 0; k < NUM_READS; k++) { + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r"(&ram_pointer + [j])); + + if (ram_pointer[j] != test[j]) + break; + } + + /* read error */ + if (k != NUM_READS) + break; + } + + /* See if the dll_dqs_delay_X value passed. */ + mtdcr(ddrcfga, DDR0_00); + if (j < NUM_TRIES + || (DDR0_00_INT_STATUS_DECODE(mfdcr(ddrcfgd)) & + 0x3F)) { + /* Failed */ + passing_cases = 0; + /* break; */ + } else { + /* Passed */ + if (passing_cases == 0) + dll_dqs_delay_X_sw_val = + dll_dqs_delay_X; + passing_cases++; + if (passing_cases >= max_passing_cases) { + max_passing_cases = passing_cases; + wr_dqs_shift_with_max_passing_cases = + wr_dqs_shift; + dll_dqs_delay_X_start_window = + dll_dqs_delay_X_sw_val; + dll_dqs_delay_X_end_window = + dll_dqs_delay_X; + } + } + + /* -----------------------------------------------------------+ + * De-assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | + DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */ + } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */ + + /* -----------------------------------------------------------+ + * Largest passing window is now detected. + * ----------------------------------------------------------*/ + + /* Compute dll_dqs_delay_X value */ + dll_dqs_delay_X = (dll_dqs_delay_X_end_window + + dll_dqs_delay_X_start_window) / 2; + wr_dqs_shift = wr_dqs_shift_with_max_passing_cases; + + debug("DQS calibration - Window detected:\n"); + debug("max_passing_cases = %d\n", max_passing_cases); + debug("wr_dqs_shift = %d\n", wr_dqs_shift); + debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X); + debug("dll_dqs_delay_X window = %d - %d\n", + dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window); + + /* -----------------------------------------------------------+ + * De-assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + /* -----------------------------------------------------------+ + * Set 'wr_dqs_shift' + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_09); + val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) + | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift); + mtdcr(ddrcfgd, val); + debug("DDR0_09=0x%08lx\n", val); + + /* -----------------------------------------------------------+ + * Set 'dqs_out_shift' = wr_dqs_shift + 32 + * ----------------------------------------------------------*/ + dqs_out_shift = wr_dqs_shift + 32; + mtdcr(ddrcfga, DDR0_22); + val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) + | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift); + mtdcr(ddrcfgd, val); + debug("DDR0_22=0x%08lx\n", val); + + /* -----------------------------------------------------------+ + * Set 'dll_dqs_delay_X'. + * ----------------------------------------------------------*/ + /* dll_dqs_delay_0 */ + mtdcr(ddrcfga, DDR0_17); + val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK) + | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_17=0x%08lx\n", val); + + /* dll_dqs_delay_1 to dll_dqs_delay_4 */ + mtdcr(ddrcfga, DDR0_18); + val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK) + | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_18=0x%08lx\n", val); + + /* dll_dqs_delay_5 to dll_dqs_delay_8 */ + mtdcr(ddrcfga, DDR0_19); + val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK) + | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_19=0x%08lx\n", val); + + /* -----------------------------------------------------------+ + * Assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON; + mtdcr(ddrcfgd, val); + + sync(); + eieio(); + + /* -----------------------------------------------------------+ + * Wait for the DCC master delay line to finish calibration + * ----------------------------------------------------------*/ + if (denali_wait_for_dlllock() != 0) { + printf("dll lock did not occur !!!\n"); + hang(); + } + sync(); + eieio(); + + if (wait_for_dram_init_complete() != 0) { + printf("dram init complete did not occur !!!\n"); + hang(); + } + udelay(100); /* wait 100us to ensure init is really completed !!! */ +} +#endif /* defined(CONFIG_DDR_DATA_EYE) */ +#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */ -- 1.5.2.5

1 0

[U-Boot-Users] [PATCH 4/9] Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
by Larry Johnson 22 Dec '07

22 Dec '07

This patch adds the Denali SDRAM controller definitions to "ppc440.h". It also fixes two typos in the definitions, so the board-specific "sdram.h" files containing these definitions are also fixed to avoid compiler warnings. Signed-off-by: Larry Johnson <lrj(a)acm.org> --- board/amcc/sequoia/sdram.h | 4 +- board/lwmon5/sdram.h | 4 +- include/ppc440.h | 514 +++++++++++++++++++++++++++++++++++++++---- 3 files changed, 470 insertions(+), 52 deletions(-) diff --git a/board/amcc/sequoia/sdram.h b/board/amcc/sequoia/sdram.h index 7f847aa..6a7bf01 100644 --- a/board/amcc/sequoia/sdram.h +++ b/board/amcc/sequoia/sdram.h @@ -395,8 +395,8 @@ #define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) #define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) #define DDR0_26_TREF_MASK 0x00003FFF -#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) -#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) +#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0) +#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF) #define DDR0_27 0x1B #define DDR0_27_EMRS_DATA_MASK 0x3FFF0000 diff --git a/board/lwmon5/sdram.h b/board/lwmon5/sdram.h index 7f847aa..6a7bf01 100644 --- a/board/lwmon5/sdram.h +++ b/board/lwmon5/sdram.h @@ -395,8 +395,8 @@ #define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) #define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) #define DDR0_26_TREF_MASK 0x00003FFF -#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) -#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) +#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0) +#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF) #define DDR0_27 0x1B #define DDR0_27_EMRS_DATA_MASK 0x3FFF0000 diff --git a/include/ppc440.h b/include/ppc440.h index 21e8836..90e56b0 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -19,6 +19,30 @@ | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M +----------------------------------------------------------------------------*/ +/* + * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie(a)fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol(a)fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman(a)fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel(a)fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder(a)fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + #ifndef __PPC440_H__ #define __PPC440_H__ @@ -186,54 +210,6 @@ #define sdr_plbtr 0x4200 #define sdr_mfr 0x4300 /* SDR0_MFR reg */ -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* test-only!!!! */ -#define DDR0_00 0x00 -#define DDR0_01 0x01 -#define DDR0_02 0x02 -#define DDR0_03 0x03 -#define DDR0_04 0x04 -#define DDR0_05 0x05 -#define DDR0_06 0x06 -#define DDR0_07 0x07 -#define DDR0_08 0x08 -#define DDR0_09 0x09 -#define DDR0_10 0x0A -#define DDR0_11 0x0B -#define DDR0_12 0x0C -#define DDR0_13 0x0D -#define DDR0_14 0x0E -#define DDR0_15 0x0F -#define DDR0_16 0x10 -#define DDR0_17 0x11 -#define DDR0_18 0x12 -#define DDR0_19 0x13 -#define DDR0_20 0x14 -#define DDR0_21 0x15 -#define DDR0_22 0x16 -#define DDR0_23 0x17 -#define DDR0_24 0x18 -#define DDR0_25 0x19 -#define DDR0_26 0x1A -#define DDR0_27 0x1B -#define DDR0_28 0x1C -#define DDR0_29 0x1D -#define DDR0_30 0x1E -#define DDR0_31 0x1F -#define DDR0_32 0x20 -#define DDR0_33 0x21 -#define DDR0_34 0x22 -#define DDR0_35 0x23 -#define DDR0_36 0x24 -#define DDR0_37 0x25 -#define DDR0_38 0x26 -#define DDR0_39 0x27 -#define DDR0_40 0x28 -#define DDR0_41 0x29 -#define DDR0_42 0x2A -#define DDR0_43 0x2B -#define DDR0_44 0x2C -#endif /*CONFIG_440EPX*/ - /*----------------------------------------------------------------------------- | SDRAM Controller +----------------------------------------------------------------------------*/ @@ -817,6 +793,448 @@ #define SDR0_MFR_FIXD 0x10000000 /* Workaround for PCI/DMA */ #endif /* CONFIG_440SPE */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +/*----------------------------------------------------------------------------- + | SDRAM Controller + +----------------------------------------------------------------------------*/ +#define DDR0_00 0x00 +#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */ +#define DDR0_00_INT_ACK_ALL 0x7F000000 +#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +/* Status */ +#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */ +/* Bit0. A single access outside the defined PHYSICAL memory space detected. */ +#define DDR0_00_INT_STATUS_BIT0 0x00010000 +/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */ +#define DDR0_00_INT_STATUS_BIT1 0x00020000 +/* Bit2. Single correctable ECC event detected */ +#define DDR0_00_INT_STATUS_BIT2 0x00040000 +/* Bit3. Multiple correctable ECC events detected. */ +#define DDR0_00_INT_STATUS_BIT3 0x00080000 +/* Bit4. Single uncorrectable ECC event detected. */ +#define DDR0_00_INT_STATUS_BIT4 0x00100000 +/* Bit5. Multiple uncorrectable ECC events detected. */ +#define DDR0_00_INT_STATUS_BIT5 0x00200000 +/* Bit6. DRAM initialization complete. */ +#define DDR0_00_INT_STATUS_BIT6 0x00400000 +/* Bit7. Logical OR of all lower bits. */ +#define DDR0_00_INT_STATUS_BIT7 0x00800000 + +#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00 +#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_00_DLL_START_POINT_MASK 0x0000007F +#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_01 0x01 +#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000 +#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000 +#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F) +#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */ +#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7) +#define DDR0_01_INT_MASK_MASK 0x000000FF +#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) +#define DDR0_01_INT_MASK_ALL_ON 0x000000FF +#define DDR0_01_INT_MASK_ALL_OFF 0x00000000 + +#define DDR0_02 0x02 +#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */ +#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24) +#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2) +#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */ +#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16) +#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF) +#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */ +#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_02_START_MASK 0x00000001 +#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1) +#define DDR0_02_START_OFF 0x00000000 +#define DDR0_02_START_ON 0x00000001 + +#define DDR0_03 0x03 +#define DDR0_03_BSTLEN_MASK 0x07000000 +#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_03_CASLAT_MASK 0x00070000 +#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_03_CASLAT_LIN_MASK 0x00000F00 +#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_03_INITAREF_MASK 0x0000000F +#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0) +#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF) + +#define DDR0_04 0x04 +#define DDR0_04_TRC_MASK 0x1F000000 +#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_04_TRRD_MASK 0x00070000 +#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_04_TRTP_MASK 0x00000700 +#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7) + +#define DDR0_05 0x05 +#define DDR0_05_TMRD_MASK 0x1F000000 +#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_05_TEMRS_MASK 0x00070000 +#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_05_TRP_MASK 0x00000F00 +#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_05_TRAS_MIN_MASK 0x000000FF +#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) + +#define DDR0_06 0x06 +#define DDR0_06_WRITEINTERP_MASK 0x01000000 +#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_06_TWTR_MASK 0x00070000 +#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_06_TDLL_MASK 0x0000FF00 +#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) +#define DDR0_06_TRFC_MASK 0x0000007F +#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_07 0x07 +#define DDR0_07_NO_CMD_INIT_MASK 0x01000000 +#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_07_TFAW_MASK 0x001F0000 +#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F) +#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100 +#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1) +#define DDR0_07_AREFRESH_MASK 0x00000001 +#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_08 0x08 +#define DDR0_08_WRLAT_MASK 0x07000000 +#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_08_TCPD_MASK 0x00FF0000 +#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_08_DQS_N_EN_MASK 0x00000100 +#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1) +#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001 +#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_09 0x09 +#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000 +#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_09_RTT_0_MASK 0x00030000 +#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) +#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3) +#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00 +#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F +#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_10 0x0A +#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */ +#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_10_CS_MAP_MASK 0x00000300 +#define DDR0_10_CS_MAP_NO_MEM 0x00000000 +#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100 +#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200 +#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8) +#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3) +#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F +#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0) +#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F) + +#define DDR0_11 0x0B +#define DDR0_11_SREFRESH_MASK 0x01000000 +#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_11_TXSNR_MASK 0x00FF0000 +#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_11_TXSR_MASK 0x0000FF00 +#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) + +#define DDR0_12 0x0C +#define DDR0_12_TCKE_MASK 0x0000007 +#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) +#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7) + +#define DDR0_14 0x0E +#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000 +#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_14_REDUC_MASK 0x00010000 +#define DDR0_14_REDUC_64BITS 0x00000000 +#define DDR0_14_REDUC_32BITS 0x00010000 +#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100 +#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1) + +#define DDR0_17 0x11 +#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000 +#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */ +#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000 +#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000 +#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */ +#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) + +#define DDR0_18 0x12 +#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F +#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000 +#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000 +#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00 +#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F +#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_19 0x13 +#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F +#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000 +#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000 +#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00 +#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F +#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_20 0x14 +#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000 +#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000 +#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00 +#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F +#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_21 0x15 +#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000 +#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000 +#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00 +#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F +#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_22 0x16 +#define DDR0_22_CTRL_RAW_MASK 0x03000000 +#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */ +#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct */ +#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */ +#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */ +#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000 +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00 +#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F +#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_23 0x17 +#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000 +#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */ +#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */ +#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) +#define DDR0_23_FWC_MASK 0x00000001 /* Write only */ +#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_24 0x18 +#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000 +#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000 +#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) +#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3) +#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300 +#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8) +#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3) +#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003 +#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0) +#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3) + +#define DDR0_25 0x19 +#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */ +#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) +#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */ +#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define DDR0_26 0x1A +#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000 +#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) +#define DDR0_26_TREF_MASK 0x00003FFF +#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0) +#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF) + +#define DDR0_27 0x1B +#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000 +#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16) +#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF) +#define DDR0_27_TINIT_MASK 0x0000FFFF +#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0) +#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF) + +#define DDR0_28 0x1C +#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000 +#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16) +#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF) +#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF +#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0) +#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF) + +#define DDR0_31 0x1F +#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF +#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0) +#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF) + +#define DDR0_32 0x20 +#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_33 0x21 +#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_34 0x22 +#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_35 0x23 +#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_36 0x24 +#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_37 0x25 +#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_38 0x26 +#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_39 0x27 +#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_40 0x28 +#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_41 0x29 +#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_42 0x2A +#define DDR0_42_ADDR_PINS_MASK 0x07000000 +#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F +#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0) +#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF) + +#define DDR0_43 0x2B +#define DDR0_43_TWR_MASK 0x07000000 +#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_43_APREBIT_MASK 0x000F0000 +#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16) +#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF) +#define DDR0_43_COLUMN_SIZE_MASK 0x00000700 +#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7) +#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001 +#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001 +#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000 +#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_44 0x2C +#define DDR0_44_TRCD_MASK 0x000000FF +#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) + +#endif /* CONFIG_440EPX */ + /*----------------------------------------------------------------------------- | External Bus Controller +----------------------------------------------------------------------------*/ -- 1.5.2.5

1 0

[U-Boot-Users] [PATCH 1/9] Add driver for STMicroelectronics M41T60 RTC
by Larry Johnson 22 Dec '07

22 Dec '07

This driver is based on the driver for the M41T11. In the intended application, the RTC will be powered by a large capacitor, rather than a battery. The driver therefore checks to see whether the RTC has lost power. The chip's OUT bit is normally reset from its power-up state. If the OUT bit is read as set, or if the date and time are not valid, then the RTC is assumed to have lost power, and its date and time are reset to 1900-01-01 00:00:00. Support for adjusting the speed of the clock to improve accuracy is provided through an environment variable. Signed-off-by: Larry Johnson <lrj(a)acm.org> --- drivers/rtc/Makefile | 1 + drivers/rtc/m41t60.c | 261 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 262 insertions(+), 0 deletions(-) create mode 100644 drivers/rtc/m41t60.c diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 1d6016e..e5ee611 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -40,6 +40,7 @@ COBJS-y += ds164x.o COBJS-y += ds174x.o COBJS-y += ds3231.o COBJS-y += m41t11.o +COBJS-y += m41t60.o COBJS-y += max6900.o COBJS-y += m48t35ax.o COBJS-y += mc146818.o diff --git a/drivers/rtc/m41t60.c b/drivers/rtc/m41t60.c new file mode 100644 index 0000000..7c80143 --- /dev/null +++ b/drivers/rtc/m41t60.c @@ -0,0 +1,261 @@ +/* + * (C) Copyright 2007 + * Larry Johnson, lrj(a)acm.org + * + * based on rtc/m41t11.c which is ... + * + * (C) Copyright 2002 + * Andrew May, Viasat Inc, amay(a)viasat.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * STMicroelectronics M41T60 serial access real-time clock + */ + +/* #define DEBUG 1 */ + +#include <common.h> +#include <command.h> +#include <rtc.h> +#include <i2c.h> + +#if defined(CONFIG_RTC_M41T60) && defined(CFG_I2C_RTC_ADDR) && \ + defined(CONFIG_CMD_DATE) + +static unsigned bcd2bin(uchar n) +{ + return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); +} + +static unsigned char bin2bcd(unsigned int n) +{ + return (((n / 10) << 4) | (n % 10)); +} + +/* + * Convert between century and "century bits" (CB1 and CB0). These routines + * assume years are in the range 1900 - 2299. + */ + +static unsigned char year2cb(unsigned const year) +{ + if (year < 1900 || year >= 2300) + printf("M41T60 RTC: year %d out of range\n", year); + + return (year / 100) & 0x3; +} + +static unsigned cb2year(unsigned const cb) +{ + return 1900 + 100 * ((cb + 1) & 0x3); +} + +/* + * These are simple defines for the chip local to here so they aren't too + * verbose. DAY/DATE aren't nice but that is how they are on the data sheet. + */ +#define RTC_SEC 0x0 +#define RTC_MIN 0x1 +#define RTC_HOUR 0x2 +#define RTC_DAY 0x3 +#define RTC_DATE 0x4 +#define RTC_MONTH 0x5 +#define RTC_YEAR 0x6 + +#define RTC_REG_CNT 7 + +#define RTC_CTRL 0x7 + +#if defined(DEBUG) +static void rtc_dump(char const *const label) +{ + uchar data[8]; + + if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) { + printf("I2C read failed in rtc_dump()\n"); + return; + } + printf("RTC dump %s: %02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X\n", + label, data[0], data[1], data[2], data[3], + data[4], data[5], data[6], data[7]); +} +#else +#define rtc_dump(label) +#endif + +static uchar *rtc_validate(void) +{ + /* + * This routine uses the OUT bit and the validity of the time values to + * determine whether there has been an initial power-up since the last + * time the routine was run. It assumes that the OUT bit is not being + * used for any other purpose. + */ + static const uchar daysInMonth[0x13] = { + 0x00, 0x31, 0x29, 0x31, 0x30, 0x31, 0x30, 0x31, + 0x31, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x31, 0x30, 0x31 + }; + static uchar data[8]; + uchar min, date, month, years; + + rtc_dump("begin validate"); + if (i2c_read(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) { + printf("I2C read failed in rtc_validate()\n"); + return 0; + } + /* + * If the OUT bit is "1", there has been a loss of power, so stop the + * oscillator so it can be "kick-started" as per data sheet. + */ + if (0x00 != (data[RTC_CTRL] & 0x80)) { + printf("M41T60 RTC clock lost power.\n"); + data[RTC_SEC] = 0x80; + if (i2c_write(CFG_I2C_RTC_ADDR, RTC_SEC, 1, data, 1)) { + printf("I2C write failed in rtc_validate()\n"); + return 0; + } + } + /* + * If the oscillator is stopped or the date is invalid, then reset the + * OUT bit to "0", reset the date registers, and start the oscillator. + */ + min = data[RTC_MIN] & 0x7F; + date = data[RTC_DATE]; + month = data[RTC_MONTH] & 0x3F; + years = data[RTC_YEAR]; + if (0x59 < data[RTC_SEC] || 0x09 < (data[RTC_SEC] & 0x0F) || + 0x59 < min || 0x09 < (min & 0x0F) || + 0x23 < data[RTC_HOUR] || 0x09 < (data[RTC_HOUR] & 0x0F) || + 0x07 < data[RTC_DAY] || 0x00 == data[RTC_DAY] || + 0x12 < month || + 0x99 < years || 0x09 < (years & 0x0F) || + daysInMonth[month] < date || 0x09 < (date & 0x0F) || 0x00 == date || + (0x29 == date && 0x02 == month && + ((0x00 != (years & 0x03)) || + (0x00 == years && 0x00 != (data[RTC_MONTH] & 0xC0))))) { + printf("Resetting M41T60 RTC clock.\n"); + /* + * Set to 00:00:00 1900-01-01 (Monday) + */ + data[RTC_SEC] = 0x00; + data[RTC_MIN] &= 0x80; /* preserve OFIE bit */ + data[RTC_HOUR] = 0x00; + data[RTC_DAY] = 0x02; + data[RTC_DATE] = 0x01; + data[RTC_MONTH] = 0xC1; + data[RTC_YEAR] = 0x00; + data[RTC_CTRL] &= 0x7F; /* reset OUT bit */ + + if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, data, sizeof(data))) { + printf("I2C write failed in rtc_validate()\n"); + return 0; + } + } + return data; +} + +void rtc_get(struct rtc_time *tmp) +{ + uchar const *const data = rtc_validate(); + + if (!data) + return; + + tmp->tm_sec = bcd2bin(data[RTC_SEC] & 0x7F); + tmp->tm_min = bcd2bin(data[RTC_MIN] & 0x7F); + tmp->tm_hour = bcd2bin(data[RTC_HOUR] & 0x3F); + tmp->tm_mday = bcd2bin(data[RTC_DATE] & 0x3F); + tmp->tm_mon = bcd2bin(data[RTC_MONTH] & 0x1F); + tmp->tm_year = cb2year(data[RTC_MONTH] >> 6) + bcd2bin(data[RTC_YEAR]); + tmp->tm_wday = bcd2bin(data[RTC_DAY] & 0x07) - 1; + tmp->tm_yday = 0; + tmp->tm_isdst = 0; + + debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +} + +void rtc_set(struct rtc_time *tmp) +{ + uchar *const data = rtc_validate(); + + if (!data) + return; + + debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + + data[RTC_SEC] = (data[RTC_SEC] & 0x80) | (bin2bcd(tmp->tm_sec) & 0x7F); + data[RTC_MIN] = (data[RTC_MIN] & 0X80) | (bin2bcd(tmp->tm_min) & 0X7F); + data[RTC_HOUR] = bin2bcd(tmp->tm_hour) & 0x3F; + data[RTC_DATE] = bin2bcd(tmp->tm_mday) & 0x3F; + data[RTC_MONTH] = bin2bcd(tmp->tm_mon) & 0x1F; + data[RTC_YEAR] = bin2bcd(tmp->tm_year % 100); + data[RTC_MONTH] |= year2cb(tmp->tm_year) << 6; + data[RTC_DAY] = bin2bcd(tmp->tm_wday + 1) & 0x07; + if (i2c_write(CFG_I2C_RTC_ADDR, 0, 1, data, RTC_REG_CNT)) { + printf("I2C write failed in rtc_set()\n"); + return; + } +} + +void rtc_reset(void) +{ + uchar *const data = rtc_validate(); + char const *const s = getenv("rtccal"); + + if (!data) + return; + + rtc_dump("begin reset"); + /* + * If environmental variable "rtccal" is present, it must be a hex value + * between 0x00 and 0x3F, inclusive. The five least-significan bits + * represent the calibration magnitude, and the sixth bit the sign bit. + * If these do not match the contents of the hardware register, that + * register is updated. The value 0x00 imples no correction. Consult + * the M41T60 documentation for further details. + */ + if (s) { + unsigned long const l = simple_strtoul(s, 0, 16); + + if (l <= 0x3F) { + if ((data[RTC_CTRL] & 0x3F) != l) { + printf("Setting RTC calibration to 0x%02X\n", + l); + data[RTC_CTRL] &= 0xC0; + data[RTC_CTRL] |= (uchar) l; + } + } else + printf("environment parameter \"rtccal\" not valid: " + "ignoring\n"); + } + /* + * Turn off frequency test. + */ + data[RTC_CTRL] &= 0xBF; + if (i2c_write(CFG_I2C_RTC_ADDR, RTC_CTRL, 1, data + RTC_CTRL, 1)) { + printf("I2C write failed in rtc_reset()\n"); + return; + } + rtc_dump("end reset"); +} +#endif /* CONFIG_RTC_M41T60 && CFG_I2C_RTC_ADDR && CONFIG_CMD_DATE */ -- 1.5.2.5

1 0

[U-Boot-Users] [PATCH 0/9] PPC4xx: Add support for Korat PPC440EPx board to "for-1.3.2" branch
by Larry Johnson 22 Dec '07

22 Dec '07

Hi Stefan, Here are my patches to add support for the Korat board to the "for-1.3.2" branch of the U-Boot PPC44x repository. They should be essentially the same as the ones I submitted previously; I haven't tried anything with FDT support yet. Best regards, Larry

1 0

[U-Boot-Users] Problem with cache diag on sequoia board in PPC4xx branch for-1.3.2
by Larry Johnson 22 Dec '07

22 Dec '07

Hi Stefan, In testing my merge of Korat PPC440EPx board support into PPC4xx branch "for-1.3.2", I found problem with the "DIAG RUN CACHE" command. The same problem occurs in the latest for-1.3.2 code for sequoia. Here is a copy of the console output showing what happens: => diag run cache Bad trap at PC: ff70220, SR: 21000, vector=1300 NIP: 0FF70220 XER: 2000005F LR: 0FF702D4 REGS: 0ff17870 TRAP: 1300 DEAR: 10000000 MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00 GPR00: 0000003F 0FF17960 7FFFFFFF 10000000 00000400 00000400 00000020 FFFFFFFF GPR08: 0FFFBFEC 0FF6F888 0000000C 10000000 00000400 00000000 0FFABD00 0FFBA000 GPR16: 15809012 22406001 C1904012 0FF17B6A 00000001 00000000 0FF17C65 00000000 GPR24: 00000600 0000000C 00000000 00000001 0FFA6AE8 0FF17F34 0FFAC714 0FF6F7DC Call backtrace: 0FF17A44 0FF6B0E8 0FF6B4AC 0FF734D0 0FF71270 0FF71450 0FF5ECA4 0FF5C6B8 F1FFFFFF Exception U-Boot 1.3.1-g76ace773 (Dec 20 2007 - 17:07:17) CPU: AMCC PowerPC 440EPx Rev. A at 528 MHz (PLB=132, OPB=66, EBC=66 MHz) Security/Kasumi support Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) Internal PCI arbiter enabled, PCI async ext clock used 32 kB I-Cache 32 kB D-Cache Board: Sequoia - AMCC PPC440EPx Evaluation Board, Rev. F, PCI=33 MHz, serial# 52149 I2C: ready DTT: 1 is 24 C DRAM: 256 MB FLASH: 64 MB NAND: 32 MiB PCI: Bus Dev VenId DevId Class Int In: serial Out: serial Err: serial USB: Host(int phy) Device(ext phy) Net: ppc_4xx_eth0, ppc_4xx_eth1 Type "run flash_nfs" to mount root filesystem over NFS => This problem does not occur on sequoia using the latest mainline (i.e., master branch) code from the PPC4xx repository. Just thought you'd like to know. :-) Best regards, Larry

2 3

[U-Boot-Users] End of merge window.
by Wolfgang Denk 22 Dec '07

22 Dec '07

Hi, as you might have noticed, the end of the merge window has come, but actually no merging took place at all. I apologize to to everybody for being so unresponsive in the last few weeks. I had to learn that it was a bad idea to open a merge window in a time where many companies have the end of their fiscal year and need to get out last minute orders very, very urgently. [Seems the end of the year is always a big surprise to many of them.] I hope to find a few silent nights to get some real work done in the following weeks, but it seems necessary to me to extend the merge window to give everybody a real chance to stay in sync. If there are no serious protests I suggest to keep this merge window open until January 10, 2008. What do you think? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de Imagination is more important than knowledge. -- Albert Einstein

4 3

[U-Boot-Users] command compleation in latest u-boot?
by Joakim Tjernlund 22 Dec '07

22 Dec '07

Trying to move my boot to latest u-boot and I can't make command completion work. Does it work in current u-boot and what config options do you use? Jocke

4 6

[U-Boot-Users] [DTC PATCH 1/2] Add yyerrorf() for formatted error messages.
by Scott Wood 22 Dec '07

22 Dec '07

Signed-off-by: Scott Wood <scottwood(a)freescale.com> --- dtc-parser.y | 16 ++++++++++++++++ srcpos.h | 1 + 2 files changed, 17 insertions(+), 0 deletions(-) diff --git a/dtc-parser.y b/dtc-parser.y index 002ea7f..4a0181d 100644 --- a/dtc-parser.y +++ b/dtc-parser.y @@ -318,6 +318,22 @@ void yyerror (char const *s) fname, yylloc.first_line, s); } +void yyerrorf(char const *s, ...) +{ + const char *fname = srcpos_filename_for_num(yylloc.filenum); + va_list va; + va_start(va, s); + + if (strcmp(fname, "-") == 0) + fname = "stdin"; + + fprintf(stderr, "%s:%d ", fname, yylloc.first_line); + vfprintf(stderr, s, va); + fprintf(stderr, "\n"); + + va_end(va); +} + unsigned long long eval_literal(const char *s, int base, int bits) { unsigned long long val; diff --git a/srcpos.h b/srcpos.h index ce7ab5b..e59c788 100644 --- a/srcpos.h +++ b/srcpos.h @@ -63,6 +63,7 @@ typedef struct YYLTYPE { extern void yyerror(char const *); +extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2))); extern int srcpos_filenum; -- 1.5.3

2 3