August 2006 - U-Boot

Re: [U-Boot-Users] tftp errors/times out on large files
by mitsy 15 Aug '06

15 Aug '06

Jerry, It looks like Redboot's tftp client and atftp's client both support large files. I am planning on studying up their code and see what they are doing. Thank you very much for the informative comment.

1 0

[U-Boot-Users] tftp errors/times out on large files
by mitsy 15 Aug '06

15 Aug '06

Hi all, I am having problem tftping large files (>30M.) The tftp will start download, and then immediately get an error, and it will say: Load address: 0x80100000 Loading: * TFTP error: 'Undefined error code' (0) Starting again or sometimes I get the 'T' (timeout) and it will repeat again. and repeat. I can download smaller files just fine. What could it be the problem? Increasing the MALLOC_LEN doesn't seem to help, and I need some advice. (FYI, I have 128M ram.) Any suggestions will be greatly appreciated!

4 4

Re: [U-Boot-Users] [DNX#2006081542000029] [Patch] Fix open #ifdef statement error , if compi [...]
by DENX Support System 15 Aug '06

15 Aug '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006081542000029] was created: <snip> > CHANGELOG: > > * Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 15 Aug. 2006: > > Fix:open #ifdef statement error, if compile with MCF5282 support </snip> Your U-Boot support team

1 0

Re: [U-Boot-Users] [DNX#2006081542000029] [Patch] Fix open #ifdef statement error , if compile with MC [...]
by U-Boot patch tracking system 15 Aug '06

15 Aug '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006081542000029]. Please keep this ticked ID string in the subject line of any e-mail replies!!! Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] [Patch] Fix open #ifdef statement error , if compile with MCF5282 support
by Jens Scharsig 15 Aug '06

15 Aug '06

CHANGELOG: * Patch by Jens Scharsig (BuS Elektronik GmbH & Co. KG), 15 Aug. 2006: Fix:open #ifdef statement error, if compile with MCF5282 support diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c index 6db6214..f9782e5 100644 --- a/cpu/mcf52x2/fec.c +++ b/cpu/mcf52x2/fec.c @@ -257,10 +257,7 @@ int eth_init (bd_t * bd) */ fecp->fec_ihash_table_high = 0; fecp->fec_ihash_table_low = 0; -#else - /* Clear multicast address hash table - */ -#ifdef CONFIG_M5282 +#elif defined(CONFIG_M5282) fecp->fec_ihash_table_high = 0; fecp->fec_ihash_table_low = 0; #else

1 0

Re: [U-Boot-Users] tftp errors/times out on large files
by mitsy 14 Aug '06

14 Aug '06

Andrew, Thank you so much for the help as always. I was wondering why it works with nfs but not tftp, if it was a memory issue. Mitsy

1 0

[U-Boot-Users] U-Boot on Xilinx ML403
by Ming Liu 14 Aug '06

14 Aug '06

Dear All, Now I am trying to use u-boot to boot my Linux kernel image(2.6.16) using tftp and then mount the file system using NFS in ML403 board. But I noticed that in U-Boot 1.1.4, there is no ML403 supported.(There is only ML300 supported.) So can anyone tell me how to include ML403 board supported in U-boot 1.1.4? Are there any patches to do that? Thanks for the help from anyone. Regards Ming _________________________________________________________________ 免费下载 MSN Explorer: http://explorer.msn.com/lccn/

1 0

Re: [U-Boot-Users] Looking for u-boot for omaph4
by Woodruff, Richard 13 Aug '06

13 Aug '06

> > Could anyone tell me where can I got well-builded u-boot.bin for > omap2420h4 ? What should be a buildable 242x-H4 & 243x-SDP images should be downloadable at http://linux.omap.com/pub/bootloader/2430sdp/u-boot.gz . If that image has issues I can fix it up. <make omap2420h4 , make > > The current U-Boot code is broken, and the board maintainer (Richard > Woodruff, on Cc:) did not care so far. Well, that is partially true. I have not tried to resync for many months now. Previous patches lagged commit so long that that it was not necessary workable by the time they were applied. The code has been pretty dynamic as perhaps a dozen versions of the board appeared in a very short time. Some of those issues dealt with the cfi_flash code and what was acceptable. That code has changed much since then and is perhaps worth trying against again. The NAND tree has also changed a lot and will take more effort to re-validate. Regards, Richard W.

3 6

Re: [U-Boot-Users] [DNX#2006081342000023] diheqVIjAjGRA
by U-Boot patch tracking system 13 Aug '06

13 Aug '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006081342000023]. Please keep this ticked ID string in the subject line of any e-mail replies!!! Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

[U-Boot-Users] [PATCH] Fix control-c handing in CONFIG_CMDLINE_EDITING
by roger blofeld 13 Aug '06

13 Aug '06

Properly pass break code back from readline. -roger blofeld diff --git a/common/main.c b/common/main.c index 3788bd5..13d12a4 100644 --- a/common/main.c +++ b/common/main.c @@ -937,6 +937,7 @@ int readline (const char *const prompt) #ifdef CONFIG_CMDLINE_EDITING char *p = console_buffer; unsigned int len=MAX_CMDBUF_SIZE; + int rc; static int initted = 0; if (!initted) { @@ -946,8 +947,8 @@ #ifdef CONFIG_CMDLINE_EDITING puts (prompt); - cread_line(p, &len); - return len; + rc = cread_line(p, &len); + return rc < 0 ? rc : len; #else char *p = console_buffer; int n = 0; /* buffer index */ __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com diff --git a/common/main.c b/common/main.c index 3788bd5..13d12a4 100644 --- a/common/main.c +++ b/common/main.c @@ -937,6 +937,7 @@ int readline (const char *const prompt) #ifdef CONFIG_CMDLINE_EDITING char *p = console_buffer; unsigned int len=MAX_CMDBUF_SIZE; + int rc; static int initted = 0; if (!initted) { @@ -946,8 +947,8 @@ #ifdef CONFIG_CMDLINE_EDITING puts (prompt); - cread_line(p, &len); - return len; + rc = cread_line(p, &len); + return rc < 0 ? rc : len; #else char *p = console_buffer; int n = 0; /* buffer index */

2 1