August 2006 - U-Boot

[U-Boot-Users] [PATCH 4/6 part 1] general header files for QUICC Engine
by Jiang Bo-r61859 17 Aug '06

17 Aug '06

Subject: [PATCH] general header files for QUICC Engine --- drivers/sysdev/qe_lib/immap_qe.h | 557 +++++++++++++++++++++++++++++++++++++ drivers/sysdev/qe_lib/qe.h | 450 ++++++++++++++++++++++++++++++ drivers/sysdev/qe_lib/qe_common.h | 41 +++ 3 files changed, 1048 insertions(+), 0 deletions(-) create mode 100644 drivers/sysdev/qe_lib/immap_qe.h create mode 100644 drivers/sysdev/qe_lib/qe.h create mode 100644 drivers/sysdev/qe_lib/qe_common.h 23270305f8857e414755c84181d5b6800bc4514d diff --git a/drivers/sysdev/qe_lib/immap_qe.h b/drivers/sysdev/qe_lib/immap_qe.h new file mode 100644 index 0000000..1394972 --- /dev/null +++ b/drivers/sysdev/qe_lib/immap_qe.h @@ -0,0 +1,557 @@ +/* + * drivers/sysdev/qe_lib/immap_qe.h + * + * QUICC Engine (QE) Internal Memory Map. + * The Internal Memory Map for devices with QE on them. This + * is the superset of all QE devices (8360, etc.). + * + * (C) Copyright 2006 Freescale Semiconductor, Inc + * Author: Shlomi Gridih <gridish(a)freescale.com> + * + * History: + * 20060601 tanya jiang (tanya.jiang(a)freescale.com) + * Code style fix; move from cpu/mpc83xx to drivers/sysdev + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_QE_H__ +#define __IMMAP_QE_H__ + +/* QE I-RAM +*/ +typedef struct qe_iram { + u32 iadd; /* I-RAM Address Register */ + u32 idata; /* I-RAM Data Register */ + u8 res0[0x78]; +} __attribute__ ((packed)) qe_iram_t; + +/* QE Interrupt Controller +*/ +typedef struct qe_ic { + u32 qicr; + u32 qivec; + u32 qripnr; + u32 qipnr; + u32 qipxcc; + u32 qipycc; + u32 qipwcc; + u32 qipzcc; + u32 qimr; + u32 qrimr; + u32 qicnr; + u8 res0[0x4]; + u32 qiprta; + u32 qiprtb; + u8 res1[0x4]; + u32 qricr; + u8 res2[0x20]; + u32 qhivec; + u8 res3[0x1C]; +} __attribute__ ((packed)) qe_ic_t; + +/* Communications Processor +*/ +typedef struct cp_qe { + u32 cecr; /* QE command register */ + u32 ceccr; /* QE controller configuration register */ + u32 cecdr; /* QE command data register */ + u8 res0[0xA]; + u16 ceter; /* QE timer event register */ + u8 res1[0x2]; + u16 cetmr; /* QE timers mask register */ + u32 cetscr; /* QE time-stamp timer control register */ + u32 cetsr1; /* QE time-stamp register 1 */ + u32 cetsr2; /* QE time-stamp register 2 */ + u8 res2[0x8]; + u32 cevter; /* QE virtual tasks event register */ + u32 cevtmr; /* QE virtual tasks mask register */ + u16 cercr; /* QE RAM control register */ + u8 res3[0x2]; + u8 res4[0x24]; + u16 ceexe1; /* QE external request 1 event register */ + u8 res5[0x2]; + u16 ceexm1; /* QE external request 1 mask register */ + u8 res6[0x2]; + u16 ceexe2; /* QE external request 2 event register */ + u8 res7[0x2]; + u16 ceexm2; /* QE external request 2 mask register */ + u8 res8[0x2]; + u16 ceexe3; /* QE external request 3 event register */ + u8 res9[0x2]; + u16 ceexm3; /* QE external request 3 mask register */ + u8 res10[0x2]; + u16 ceexe4; /* QE external request 4 event register */ + u8 res11[0x2]; + u16 ceexm4; /* QE external request 4 mask register */ + u8 res12[0x2]; + u8 res13[0x280]; +} __attribute__ ((packed)) cp_qe_t; + +/* QE Multiplexer +*/ +typedef struct qe_mux { + u32 cmxgcr; /* CMX general clock route register */ + u32 cmxsi1cr_l; /* CMX SI1 clock route low register */ + u32 cmxsi1cr_h; /* CMX SI1 clock route high register */ + u32 cmxsi1syr; /* CMX SI1 SYNC route register */ + u32 cmxucr1; /* CMX UCC1, UCC3 clock route register */ + u32 cmxucr2; /* CMX UCC5, UCC7 clock route register */ + u32 cmxucr3; /* CMX UCC2, UCC4 clock route register */ + u32 cmxucr4; /* CMX UCC6, UCC8 clock route register */ + u32 cmxupcr; /* CMX UPC clock route register */ + u8 res0[0x1C]; +} __attribute__ ((packed)) qe_mux_t; + +/* QE Timers +*/ +typedef struct qe_timers { + u8 gtcfr1; /* Timer 1 2 global configuration register */ + u8 res0[0x3]; + u8 gtcfr2; /* Timer 3 4 global configuration register */ + u8 res1[0xB]; + u16 gtmdr1; /* Timer 1 mode register */ + u16 gtmdr2; /* Timer 2 mode register */ + u16 gtrfr1; /* Timer 1 reference register */ + u16 gtrfr2; /* Timer 2 reference register */ + u16 gtcpr1; /* Timer 1 capture register */ + u16 gtcpr2; /* Timer 2 capture register */ + u16 gtcnr1; /* Timer 1 counter */ + u16 gtcnr2; /* Timer 2 counter */ + u16 gtmdr3; /* Timer 3 mode register */ + u16 gtmdr4; /* Timer 4 mode register */ + u16 gtrfr3; /* Timer 3 reference register */ + u16 gtrfr4; /* Timer 4 reference register */ + u16 gtcpr3; /* Timer 3 capture register */ + u16 gtcpr4; /* Timer 4 capture register */ + u16 gtcnr3; /* Timer 3 counter */ + u16 gtcnr4; /* Timer 4 counter */ + u16 gtevr1; /* Timer 1 event register */ + u16 gtevr2; /* Timer 2 event register */ + u16 gtevr3; /* Timer 3 event register */ + u16 gtevr4; /* Timer 4 event register */ + u16 gtps; /* Timer 1 prescale register */ + u8 res2[0x46]; +} __attribute__ ((packed)) qe_timers_t; + +/* BRG +*/ +typedef struct qe_brg { + u32 brgc1; /* BRG1 configuration register */ + u32 brgc2; /* BRG2 configuration register */ + u32 brgc3; /* BRG3 configuration register */ + u32 brgc4; /* BRG4 configuration register */ + u32 brgc5; /* BRG5 configuration register */ + u32 brgc6; /* BRG6 configuration register */ + u32 brgc7; /* BRG7 configuration register */ + u32 brgc8; /* BRG8 configuration register */ + u32 brgc9; /* BRG9 configuration register */ + u32 brgc10; /* BRG10 configuration register */ + u32 brgc11; /* BRG11 configuration register */ + u32 brgc12; /* BRG12 configuration register */ + u32 brgc13; /* BRG13 configuration register */ + u32 brgc14; /* BRG14 configuration register */ + u32 brgc15; /* BRG15 configuration register */ + u32 brgc16; /* BRG16 configuration register */ + u8 res0[0x40]; +} __attribute__ ((packed)) qe_brg_t; + +/* SPI +*/ +typedef struct spi { + u8 res0[0x20]; + u32 spmode; /* SPI mode register */ + u8 res1[0x2]; + u8 spie; /* SPI event register */ + u8 res2[0x1]; + u8 res3[0x2]; + u8 spim; /* SPI mask register */ + u8 res4[0x1]; + u8 res5[0x1]; + u8 spcom; /* SPI command register */ + u8 res6[0x2]; + u32 spitd; /* SPI transmit data register (cpu mode) */ + u32 spird; /* SPI receive data register (cpu mode) */ + u8 res7[0x8]; +} __attribute__ ((packed)) spi_t; + +/* SI +*/ +typedef struct si1 { + u16 siamr1; /* SI1 TDMA mode register */ + u16 sibmr1; /* SI1 TDMB mode register */ + u16 sicmr1; /* SI1 TDMC mode register */ + u16 sidmr1; /* SI1 TDMD mode register */ + u8 siglmr1_h; /* SI1 global mode register high */ + u8 res0[0x1]; + u8 sicmdr1_h; /* SI1 command register high */ + u8 res2[0x1]; + u8 sistr1_h; /* SI1 status register high */ + u8 res3[0x1]; + u16 sirsr1_h; /* SI1 RAM shadow address register high */ + u8 sitarc1; /* SI1 RAM counter Tx TDMA */ + u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ + u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ + u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ + u8 sirarc1; /* SI1 RAM counter Rx TDMA */ + u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ + u8 sircrc1; /* SI1 RAM counter Rx TDMC */ + u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ + u8 res4[0x8]; + u16 siemr1; /* SI1 TDME mode register 16 bits */ + u16 sifmr1; /* SI1 TDMF mode register 16 bits */ + u16 sigmr1; /* SI1 TDMG mode register 16 bits */ + u16 sihmr1; /* SI1 TDMH mode register 16 bits */ + u8 siglmg1_l; /* SI1 global mode register low 8 bits */ + u8 res5[0x1]; + u8 sicmdr1_l; /* SI1 command register low 8 bits */ + u8 res6[0x1]; + u8 sistr1_l; /* SI1 status register low 8 bits */ + u8 res7[0x1]; + u16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits */ + u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ + u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ + u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ + u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ + u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ + u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ + u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ + u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ + u8 res8[0x8]; + u32 siml1; /* SI1 multiframe limit register */ + u8 siedm1; /* SI1 extended diagnostic mode register */ + u8 res9[0xBB]; +} __attribute__ ((packed)) si1_t; + +/* SI Routing Tables +*/ +typedef struct sir { + u8 tx[0x400]; + u8 rx[0x400]; + u8 res0[0x800]; +} __attribute__ ((packed)) sir_t; + +/* USB Controller. +*/ +typedef struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + u16 usb_usep1; + u16 usb_usep2; + u16 usb_usep3; + u16 usb_usep4; + u8 res2[4]; + u16 usb_usber; + u8 res3[2]; + u16 usb_usbmr; + u8 res4[1]; + u8 usb_usbs; + u16 usb_ussft; + u8 res5[2]; + u16 usb_usfrn; + u8 res6[0x22]; +} __attribute__ ((packed)) usb_t; + +/* MCC +*/ +typedef struct mcc { + u32 mcce; /* MCC event register */ + u32 mccm; /* MCC mask register */ + u32 mccf; /* MCC configuration register */ + u32 merl; /* MCC emergency request level register */ + u8 res0[0xF0]; +} __attribute__ ((packed)) mcc_t; + +/* QE UCC Slow +*/ +typedef struct ucc_slow { + u32 gumr_l; /* UCCx general mode register (low) */ + u32 gumr_h; /* UCCx general mode register (high) */ + u16 upsmr; /* UCCx protocol-specific mode register */ + u8 res0[0x2]; + u16 utodr; /* UCCx transmit on demand register */ + u16 udsr; /* UCCx data synchronization register */ + u16 ucce; /* UCCx event register */ + u8 res1[0x2]; + u16 uccm; /* UCCx mask register */ + u8 res2[0x1]; + u8 uccs; /* UCCx status register */ + u8 res3[0x24]; + u16 utpt; + u8 guemr; /* UCC general extended mode register */ + u8 res4[0x200 - 0x091]; +} __attribute__ ((packed)) ucc_slow_t; + +typedef struct ucc_geth { + u32 maccfg1; /* mac configuration reg. 1 */ + u32 maccfg2; /* mac configuration reg. 2 */ + u32 ipgifg; /* interframe gap reg. */ + u32 hafdup; /* half-duplex reg. */ + u8 res1[0x10]; + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ + u32 ifctl; /* interface control reg */ + u32 ifstat; /* interface statux reg */ + u32 macstnaddr1; /* mac station address part 1 reg */ + u32 macstnaddr2; /* mac station address part 2 reg */ + u8 res2[0x8]; + u32 uempr; /* UCC Ethernet Mac parameter reg */ + u32 utbipar; /* UCC tbi address reg */ + u16 uescr; /* UCC Ethernet statistics control reg */ + u8 res3[0x180 - 0x15A]; + u32 tx64; /* Total number of frames (including bad + * frames) transmitted that were exactly + * of the minimal length (64 for un tagged, + * 68 for tagged, or with length exactly + * equal to the parameter MINLength */ + u32 tx127; /* Total number of frames (including bad + * frames) transmitted that were between + * MINLength (Including FCS length==4) + * and 127 octets */ + u32 tx255; /* Total number of frames (including bad + * frames) transmitted that were between + * 128 (Including FCS length==4) and 255 + * octets */ + u32 rx64; /* Total number of frames received including + * bad frames that were exactly of the + * mninimal length (64 bytes) */ + u32 rx127; /* Total number of frames (including bad + * frames) received that were between + * MINLength (Including FCS length==4) + * and 127 octets */ + u32 rx255; /* Total number of frames (including + * bad frames) received that were between + * 128 (Including FCS length==4) and 255 + * octets */ + u32 txok; /* Total number of octets residing in frames + * that where involved in succesfull + * transmission */ + u16 txcf; /* Total number of PAUSE control frames + * transmitted by this MAC */ + u8 res4[0x2]; + u32 tmca; /* Total number of frames that were transmitted + * succesfully with the group address bit set + * that are not broadcast frames */ + u32 tbca; /* Total number of frames transmitted + * succesfully that had destination address + * field equal to the broadcast address */ + u32 rxfok; /* Total number of frames received OK */ + u32 rxbok; /* Total number of octets received OK */ + u32 rbyt; /* Total number of octets received including + * octets in bad frames. Must be implemented + * in HW because it includes octets in frames + * that never even reach the UCC */ + u32 rmca; /* Total number of frames that were received + * succesfully with the group address bit set + * that are not broadcast frames */ + u32 rbca; /* Total number of frames received succesfully + * that had destination address equal to the + * broadcast address */ + u32 scar; /* Statistics carry register */ + u32 scam; /* Statistics caryy mask register */ + u8 res5[0x200 - 0x1c4]; +} __attribute__ ((packed)) ucc_geth_t; + +/* QE UCC Fast +*/ +typedef struct ucc_fast { + u32 gumr; /* UCCx general mode register */ + u32 upsmr; /* UCCx protocol-specific mode register */ + u16 utodr; /* UCCx transmit on demand register */ + u8 res0[0x2]; + u16 udsr; /* UCCx data synchronization register */ + u8 res1[0x2]; + u32 ucce; /* UCCx event register */ + u32 uccm; /* UCCx mask register. */ + u8 uccs; /* UCCx status register */ + u8 res2[0x7]; + u32 urfb; /* UCC receive FIFO base */ + u16 urfs; /* UCC receive FIFO size */ + u8 res3[0x2]; + u16 urfet; /* UCC receive FIFO emergency threshold */ + u16 urfset; /* UCC receive FIFO special emergency + * threshold */ + u32 utfb; /* UCC transmit FIFO base */ + u16 utfs; /* UCC transmit FIFO size */ + u8 res4[0x2]; + u16 utfet; /* UCC transmit FIFO emergency threshold */ + u8 res5[0x2]; + u16 utftt; /* UCC transmit FIFO transmit threshold */ + u8 res6[0x2]; + u16 utpt; /* UCC transmit polling timer */ + u8 res7[0x2]; + u32 urtry; /* UCC retry counter register */ + u8 res8[0x4C]; + u8 guemr; /* UCC general extended mode register */ + u8 res9[0x100 - 0x091]; + ucc_geth_t ugeth; +} __attribute__ ((packed)) ucc_fast_t; + +/* QE UCC +*/ +typedef struct ucc_common { + u8 res1[0x90]; + u8 guemr; + u8 res2[0x200 - 0x091]; +} __attribute__ ((packed)) ucc_common_t; + +typedef struct ucc { + union { + ucc_slow_t slow; + ucc_fast_t fast; + ucc_common_t common; + }; +} __attribute__ ((packed)) ucc_t; + +/* MultiPHY UTOPIA POS Controllers (UPC) +*/ +typedef struct upc { + u32 upgcr; /* UTOPIA/POS general configuration register */ + u32 uplpa; /* UTOPIA/POS last PHY address */ + u32 uphec; /* ATM HEC register */ + u32 upuc; /* UTOPIA/POS UCC configuration */ + u32 updc1; /* UTOPIA/POS device 1 configuration */ + u32 updc2; /* UTOPIA/POS device 2 configuration */ + u32 updc3; /* UTOPIA/POS device 3 configuration */ + u32 updc4; /* UTOPIA/POS device 4 configuration */ + u32 upstpa; /* UTOPIA/POS STPA threshold */ + u8 res0[0xC]; + u32 updrs1_h; /* UTOPIA/POS device 1 rate select */ + u32 updrs1_l; /* UTOPIA/POS device 1 rate select */ + u32 updrs2_h; /* UTOPIA/POS device 2 rate select */ + u32 updrs2_l; /* UTOPIA/POS device 2 rate select */ + u32 updrs3_h; /* UTOPIA/POS device 3 rate select */ + u32 updrs3_l; /* UTOPIA/POS device 3 rate select */ + u32 updrs4_h; /* UTOPIA/POS device 4 rate select */ + u32 updrs4_l; /* UTOPIA/POS device 4 rate select */ + u32 updrp1; /* UTOPIA/POS device 1 receive priority low */ + u32 updrp2; /* UTOPIA/POS device 2 receive priority low */ + u32 updrp3; /* UTOPIA/POS device 3 receive priority low */ + u32 updrp4; /* UTOPIA/POS device 4 receive priority low */ + u32 upde1; /* UTOPIA/POS device 1 event */ + u32 upde2; /* UTOPIA/POS device 2 event */ + u32 upde3; /* UTOPIA/POS device 3 event */ + u32 upde4; /* UTOPIA/POS device 4 event */ + u16 uprp1; + u16 uprp2; + u16 uprp3; + u16 uprp4; + u8 res1[0x8]; + u16 uptirr1_0; /* Device 1 transmit internal rate 0 */ + u16 uptirr1_1; /* Device 1 transmit internal rate 1 */ + u16 uptirr1_2; /* Device 1 transmit internal rate 2 */ + u16 uptirr1_3; /* Device 1 transmit internal rate 3 */ + u16 uptirr2_0; /* Device 2 transmit internal rate 0 */ + u16 uptirr2_1; /* Device 2 transmit internal rate 1 */ + u16 uptirr2_2; /* Device 2 transmit internal rate 2 */ + u16 uptirr2_3; /* Device 2 transmit internal rate 3 */ + u16 uptirr3_0; /* Device 3 transmit internal rate 0 */ + u16 uptirr3_1; /* Device 3 transmit internal rate 1 */ + u16 uptirr3_2; /* Device 3 transmit internal rate 2 */ + u16 uptirr3_3; /* Device 3 transmit internal rate 3 */ + u16 uptirr4_0; /* Device 4 transmit internal rate 0 */ + u16 uptirr4_1; /* Device 4 transmit internal rate 1 */ + u16 uptirr4_2; /* Device 4 transmit internal rate 2 */ + u16 uptirr4_3; /* Device 4 transmit internal rate 3 */ + u32 uper1; /* Device 1 port enable register */ + u32 uper2; /* Device 2 port enable register */ + u32 uper3; /* Device 3 port enable register */ + u32 uper4; /* Device 4 port enable register */ + u8 res2[0x150]; +} __attribute__ ((packed)) upc_t; + +/* SDMA +*/ +typedef struct sdma { + u32 sdsr; /* Serial DMA status register */ + u32 sdmr; /* Serial DMA mode register */ + u32 sdtr1; /* SDMA system bus threshold register */ + u32 sdtr2; /* SDMA secondary bus threshold register */ + u32 sdhy1; /* SDMA system bus hysteresis register */ + u32 sdhy2; /* SDMA secondary bus hysteresis register */ + u32 sdta1; /* SDMA system bus address register */ + u32 sdta2; /* SDMA secondary bus address register */ + u32 sdtm1; /* SDMA system bus MSNUM register */ + u32 sdtm2; /* SDMA secondary bus MSNUM register */ + u8 res0[0x10]; + u32 sdaqr; /* SDMA address bus qualify register */ + u32 sdaqmr; /* SDMA address bus qualify mask register */ + u8 res1[0x4]; + u32 sdwbcr; /* SDMA CAM entries base register */ + u8 res2[0x38]; +} __attribute__ ((packed)) sdma_t; + +/* Debug Space +*/ +typedef struct dbg { + u32 bpdcr; /* Breakpoint debug command register */ + u32 bpdsr; /* Breakpoint debug status register */ + u32 bpdmr; /* Breakpoint debug mask register */ + u32 bprmrr0; /* Breakpoint request mode risc register 0 */ + u32 bprmrr1; /* Breakpoint request mode risc register 1 */ + u8 res0[0x8]; + u32 bprmtr0; /* Breakpoint request mode trb register 0 */ + u32 bprmtr1; /* Breakpoint request mode trb register 1 */ + u8 res1[0x8]; + u32 bprmir; /* Breakpoint request mode immediate register */ + u32 bprmsr; /* Breakpoint request mode serial register */ + u32 bpemr; /* Breakpoint exit mode register */ + u8 res2[0x48]; +} __attribute__ ((packed)) dbg_t; + +/* RISC Special Registers (Trap and Breakpoint) +*/ +typedef struct rsp { + u8 fixme[0x100]; +} __attribute__ ((packed)) rsp_t; + +typedef struct qe_immap { + qe_iram_t iram; /* I-RAM */ + qe_ic_t ic; /* Interrupt Controller */ + cp_qe_t cp; /* Communications Processor */ + qe_mux_t qmx; /* QE Multiplexer */ + qe_timers_t qet; /* QE Timers */ + spi_t spi[0x2]; /* spi */ + mcc_t mcc; /* mcc */ + qe_brg_t brg; /* brg */ + usb_t usb; /* USB */ + si1_t si1; /* SI */ + u8 res11[0x800]; + sir_t sir; /* SI Routing Tables */ + ucc_t ucc1; /* ucc1 */ + ucc_t ucc3; /* ucc3 */ + ucc_t ucc5; /* ucc5 */ + ucc_t ucc7; /* ucc7 */ + u8 res12[0x600]; + upc_t upc1; /* MultiPHY UTOPIA POS Controller 1 */ + ucc_t ucc2; /* ucc2 */ + ucc_t ucc4; /* ucc4 */ + ucc_t ucc6; /* ucc6 */ + ucc_t ucc8; /* ucc8 */ + u8 res13[0x600]; + upc_t upc2; /* MultiPHY UTOPIA POS Controller 2 */ + sdma_t sdma; /* SDMA */ + dbg_t dbg; /* Debug Space */ + rsp_t rsp[0x2]; /* RISC Special Registers + * (Trap and Breakpoint) */ + u8 res14[0x300]; + u8 res15[0x3A00]; + u8 res16[0x8000]; /* 0x108000 - 0x110000 */ + u8 muram[0xC000]; /* 0x110000 - 0x11C000 Multi-user RAM */ + u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ + u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ +} __attribute__ ((packed)) qe_map_t; + +extern qe_map_t *qe_immr; + +#endif /* __IMMAP_QE_H__ */ +#endif /* __KERNEL__ */ diff --git a/drivers/sysdev/qe_lib/qe.h b/drivers/sysdev/qe_lib/qe.h new file mode 100644 index 0000000..5cb9a16 --- /dev/null +++ b/drivers/sysdev/qe_lib/qe.h @@ -0,0 +1,450 @@ +/* + * drivers/sysdev/qe_lib/qe.h + * + * QUICC Engine (QE) external definitions and structure. + * + * (C) Copyright 2006 Freescale Semiconductor, Inc + * Author: Shlomi Gridih <gridish(a)freescale.com> + * + * History: + * 20060601 tanya jiang (tanya.jiang(a)freescale.com) + * Code style fixed; move from cpu/mpc83xx to drivers/sysdev + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifdef __KERNEL__ +#ifndef __QE_H__ +#define __QE_H__ + +#include "immap_qe.h" + +/* Multi User RAM addresses. + */ +#define QE_MURAM_DATAONLY_BASE ((uint)0x0) +#define QE_MURAM_NOSPACE ((uint)0x7fffffff) +#define QE_MURAM_DATAONLY_SIZE ((uint)(48 * 1024) - QE_MURAM_DATAONLY_BASE) + +static inline long IS_MURAM_ERR(const uint offset) +{ + return (uint) offset > (uint) - 1000L; +} + +#define QE_NUM_OF_SNUM 28 +#define QE_NUM_OF_BRGS 16 +#define QE_NUM_OF_PORTS 1024 + +/* Memory partitions +*/ +#define MEM_PART_SYSTEM 0 +#define MEM_PART_SECONDARY 1 +#define MEM_PART_MURAM 2 + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +int qe_issue_cmd(uint cmd, uint device, u8 TypeId, u32 cmd_input); +void qe_setbrg(uint brg, uint rate); +int qe_get_snum(void); +void qe_put_snum(u8 snum); +uint qe_muram_alloc(uint size, uint align); +int qe_muram_free(uint offset); +uint qe_muram_alloc_fixed(uint offset, uint size, uint align); +void qe_muram_dump(void); +void *qe_muram_addr(uint offset); + +/* Buffer descriptors. +*/ +typedef struct qe_bd { + u16 status; + u16 length; + u32 buf; +} __attribute__ ((packed)) qe_bd_t; + +#define QE_SIZEOF_BD sizeof(qe_bd_t) + +#define BD_STATUS_MASK 0xffff0000 +#define BD_LENGTH_MASK 0x0000ffff + +#define BD_BUFFER_ARG(bd) ((qe_bd_t *)bd)->buf +#define BD_BUFFER_CLEAR(bd) out_be32(&(BD_BUFFER_ARG(bd)), 0); +#define BD_BUFFER(bd) in_be32(&(BD_BUFFER_ARG(bd))) +#define BD_STATUS_AND_LENGTH_SET(bd, val) out_be32((u32*)bd, val) +#define BD_STATUS_AND_LENGTH(bd) in_be32((u32*)bd) +#define BD_BUFFER_SET(bd, buffer) out_be32(&(BD_BUFFER_ARG(bd)), (u32)(buffer)) +/* Macro for retrieving the following BD. + example: + next = BD_GET_NEXT( currBd, bdStatus, bdBase, SIZEOF_MY_BD, T_W ) */ +#define BD_GET_NEXT( curr_bd, bd_status, bd_base, bd_len, last_bd ) \ + ( (!((bd_status) & (last_bd))) ? ((curr_bd)+(bd_len)) : (bd_base) ) + +/* Alignments +*/ +#define QE_INTR_TABLE_ALIGN 16 +#define QE_ALIGNMENT_OF_BD 8 +#define QE_ALIGNMENT_OF_PRAM 64 + +/* RISC allocation +*/ +typedef enum qe_risc_allocation { + QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */ + QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */ + QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose RISC 1 or RISC 2 */ +} qe_risc_allocation_e; + +/* QE extended filtering Table Lookup Key Size +*/ +typedef enum qe_fltr_tbl_lookup_key_size { + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES + = 0x3f, /* LookupKey parsed by the Generate LookupKey + * CMD is truncated to 8 bytes */ + QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES + = 0x5f, /* LookupKey parsed by the Generate LookupKey + * CMD is truncated to 16 bytes */ +} qe_fltr_tbl_lookup_key_size_e; + +/* QE FLTR extended filtering Largest External Table Lookup Key Size +*/ +typedef enum qe_fltr_largest_external_tbl_lookup_key_size_ { + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE + = 0x0, /* not used */ + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES + = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ + QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES + = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES /* 16 bytes */ +} qe_fltr_largest_external_tbl_lookup_key_size_e; + +/* structure representing QE parameter RAM +*/ +typedef struct qe_timer_tables { + u16 tm_base; /* QE timer table base adr */ + u16 tm_ptr; /* QE timer table pointer */ + u16 r_tmr; /* QE timer mode register */ + u16 r_tmv; /* QE timer valid register */ + u32 tm_cmd; /* QE timer cmd register */ + u32 tm_cnt; /* QE timer internal cnt */ +} __attribute__ ((packed)) qe_timer_tables_t; + +#define QE_FLTR_TAD_SIZE 8 + +/* QE extended filtering Termination Action Descriptor (TAD) +*/ +typedef struct qe_fltr_tad { + u8 serialized[QE_FLTR_TAD_SIZE]; +} __attribute__ ((packed)) qe_fltr_tad_t; + +/* Communication Direction. +*/ +typedef enum comm_dir { + COMM_DIR_NONE = 0, + COMM_DIR_RX = 1, + COMM_DIR_TX = 2, + COMM_DIR_RX_AND_TX = 3 +} comm_dir_e; + +/* Clocks and GRG's +*/ +typedef enum qe_clock { + QE_CLK_NONE = 0 + , QE_BRG1 /* Baud Rate Generator 1 */ + , QE_BRG2 /* Baud Rate Generator 2 */ + , QE_BRG3 /* Baud Rate Generator 3 */ + , QE_BRG4 /* Baud Rate Generator 4 */ + , QE_BRG5 /* Baud Rate Generator 5 */ + , QE_BRG6 /* Baud Rate Generator 6 */ + , QE_BRG7 /* Baud Rate Generator 7 */ + , QE_BRG8 /* Baud Rate Generator 8 */ + , QE_BRG9 /* Baud Rate Generator 9 */ + , QE_BRG10 /* Baud Rate Generator 10 */ + , QE_BRG11 /* Baud Rate Generator 11 */ + , QE_BRG12 /* Baud Rate Generator 12 */ + , QE_BRG13 /* Baud Rate Generator 13 */ + , QE_BRG14 /* Baud Rate Generator 14 */ + , QE_BRG15 /* Baud Rate Generator 15 */ + , QE_BRG16 /* Baud Rate Generator 16 */ + , QE_CLK1 /* Clock 1 */ + , QE_CLK2 /* Clock 2 */ + , QE_CLK3 /* Clock 3 */ + , QE_CLK4 /* Clock 4 */ + , QE_CLK5 /* Clock 5 */ + , QE_CLK6 /* Clock 6 */ + , QE_CLK7 /* Clock 7 */ + , QE_CLK8 /* Clock 8 */ + , QE_CLK9 /* Clock 9 */ + , QE_CLK10 /* Clock 10 */ + , QE_CLK11 /* Clock 11 */ + , QE_CLK12 /* Clock 12 */ + , QE_CLK13 /* Clock 13 */ + , QE_CLK14 /* Clock 14 */ + , QE_CLK15 /* Clock 15 */ + , QE_CLK16 /* Clock 16 */ + , QE_CLK17 /* Clock 17 */ + , QE_CLK18 /* Clock 18 */ + , QE_CLK19 /* Clock 19 */ + , QE_CLK20 /* Clock 20 */ + , QE_CLK21 /* Clock 21 */ + , QE_CLK22 /* Clock 22 */ + , QE_CLK23 /* Clock 23 */ + , QE_CLK24 /* Clock 24 */ + , QE_CLK_DUMMY +} qe_clock_e; + +/* QE CMXUCR Registers. + * There are two UCCs represented in each of the four CMXUCR registers. + * These values are for the UCC in the LSBs + */ +#define QE_CMXUCR_MII_ENET_MNG 0x00007000 +#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12 +#define QE_CMXUCR_GRANT 0x00008000 +#define QE_CMXUCR_TSA 0x00004000 +#define QE_CMXUCR_BKPT 0x00000100 +#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F + +/* QE CECR Commands. +*/ +#define QE_CR_FLG 0x00010000 +#define QE_RESET 0x80000000 +#define QE_INIT_TX_RX 0x00000000 +#define QE_INIT_RX 0x00000001 +#define QE_INIT_TX 0x00000002 +#define QE_ENTER_HUNT_MODE 0x00000003 +#define QE_STOP_TX 0x00000004 +#define QE_GRACEFUL_STOP_TX 0x00000005 +#define QE_RESTART_TX 0x00000006 +#define QE_CLOSE_RX_BD 0x00000007 +#define QE_SWITCH_COMMAND 0x00000007 +#define QE_SET_GROUP_ADDRESS 0x00000008 +#define QE_START_IDMA 0x00000009 +#define QE_MCC_STOP_RX 0x00000009 +#define QE_ATM_TRANSMIT 0x0000000a +#define QE_HPAC_CLEAR_ALL 0x0000000b +#define QE_GRACEFUL_STOP_RX 0x0000001a +#define QE_RESTART_RX 0x0000001b +#define QE_HPAC_SET_PRIORITY 0x0000010b +#define QE_HPAC_STOP_TX 0x0000020b +#define QE_HPAC_STOP_RX 0x0000030b +#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b +#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b +#define QE_HPAC_START_TX 0x0000060b +#define QE_HPAC_START_RX 0x0000070b +#define QE_USB_STOP_TX 0x0000000a +#define QE_USB_RESTART_TX 0x0000000b +#define QE_QMC_STOP_TX 0x0000000c +#define QE_QMC_STOP_RX 0x0000000d +#define QE_SS7_SU_FIL_RESET 0x0000000e +/* jonathbr added from here down for 83xx */ +#define QE_RESET_BCS 0x0000000a +#define QE_MCC_INIT_TX_RX_16 0x00000003 +#define QE_MCC_STOP_TX 0x00000004 +#define QE_MCC_INIT_TX_1 0x00000005 +#define QE_MCC_INIT_RX_1 0x00000006 +#define QE_MCC_RESET 0x00000007 +#define QE_SET_TIMER 0x00000008 +#define QE_RANDOM_NUMBER 0x0000000c +#define QE_ATM_MULTI_THREAD_INIT 0x00000011 +#define QE_ASSIGN_PAGE 0x00000012 +#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013 +#define QE_START_FLOW_CONTROL 0x00000014 +#define QE_STOP_FLOW_CONTROL 0x00000015 +#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 + +/* QE CECR Sub Block - sub block of QE command. +*/ +#define QE_CR_SUBBLOCK_INVALID 0x00000000 +#define QE_CR_SUBBLOCK_USB 0x03200000 +#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 +#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 +#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 +#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 +#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 +#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 +#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 +#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 +#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 +#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 +#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 +#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 +#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 +#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 +#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 +#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 +#define QE_CR_SUBBLOCK_MCC1 0x03800000 +#define QE_CR_SUBBLOCK_MCC2 0x03a00000 +#define QE_CR_SUBBLOCK_MCC3 0x03000000 +#define QE_CR_SUBBLOCK_IDMA1 0x02800000 +#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 +#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 +#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 +#define QE_CR_SUBBLOCK_HPAC 0x01e00000 +#define QE_CR_SUBBLOCK_SPI1 0x01400000 +#define QE_CR_SUBBLOCK_SPI2 0x01600000 +#define QE_CR_SUBBLOCK_RAND 0x01c00000 +#define QE_CR_SUBBLOCK_TIMER 0x01e00000 +#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 + +/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command. +*/ +#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ +#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 +#define QE_CR_PROTOCOL_ATM_POS 0x0A +#define QE_CR_PROTOCOL_ETHERNET 0x0C +#define QE_CR_PROTOCOL_L2_SWITCH 0x0D + +/* BMR byte order +*/ +#define QE_BMR_BYTE_ORDER_BO_PPC 0x08 /* powerpc little endian */ +#define QE_BMR_BYTE_ORDER_BO_MOT 0x10 /* motorola big endian */ +#define QE_BMR_BYTE_ORDER_BO_MAX 0x18 + +/* BRG configuration register +*/ +#define QE_BRGC_ENABLE 0x00010000 +#define QE_BRGC_DIVISOR_SHIFT 1 +#define QE_BRGC_DIVISOR_MAX 0xFFF +#define QE_BRGC_DIV16 1 + +/* UPC +*/ +#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ +#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ +#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ +#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */ +#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ + +/* UCC +*/ +#define UCC_GUEMR_MODE_MASK_RX 0x02 +#define UCC_GUEMR_MODE_MASK_TX 0x01 +#define UCC_GUEMR_MODE_FAST_RX 0x02 +#define UCC_GUEMR_MODE_FAST_TX 0x01 +#define UCC_GUEMR_MODE_SLOW_RX 0x00 +#define UCC_GUEMR_MODE_SLOW_TX 0x00 +#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but must be set 1 */ + +/* structure representing UCC SLOW parameter RAM +*/ +typedef struct ucc_slow_pram { + u16 rbase; /* RX BD base address */ + u16 tbase; /* TX BD base address */ + u8 rfcr; /* Rx function code */ + u8 tfcr; /* Tx function code */ + u16 mrblr; /* Rx buffer length */ + u32 rstate; /* Rx internal state */ + u32 rptr; /* Rx internal data pointer */ + u16 rbptr; /* rb BD Pointer */ + u16 rcount; /* Rx internal byte count */ + u32 rtemp; /* Rx temp */ + u32 tstate; /* Tx internal state */ + u32 tptr; /* Tx internal data pointer */ + u16 tbptr; /* Tx BD pointer */ + u16 tcount; /* Tx byte count */ + u32 ttemp; /* Tx temp */ + u32 rcrc; /* temp receive CRC */ + u32 tcrc; /* temp transmit CRC */ +} __attribute__ ((packed)) ucc_slow_pram_t; + +/* General UCC SLOW Mode Register (GUMRH & GUMRL) +*/ +#define UCC_SLOW_GUMR_H_CRC16 0x00004000 +#define UCC_SLOW_GUMR_H_CRC16CCITT 0x00000000 +#define UCC_SLOW_GUMR_H_CRC32CCITT 0x00008000 +#define UCC_SLOW_GUMR_H_REVD 0x00002000 +#define UCC_SLOW_GUMR_H_TRX 0x00001000 +#define UCC_SLOW_GUMR_H_TTX 0x00000800 +#define UCC_SLOW_GUMR_H_CDP 0x00000400 +#define UCC_SLOW_GUMR_H_CTSP 0x00000200 +#define UCC_SLOW_GUMR_H_CDS 0x00000100 +#define UCC_SLOW_GUMR_H_CTSS 0x00000080 +#define UCC_SLOW_GUMR_H_TFL 0x00000040 +#define UCC_SLOW_GUMR_H_RFW 0x00000020 +#define UCC_SLOW_GUMR_H_TXSY 0x00000010 +#define UCC_SLOW_GUMR_H_4SYNC 0x00000004 +#define UCC_SLOW_GUMR_H_8SYNC 0x00000008 +#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c +#define UCC_SLOW_GUMR_H_RTSM 0x00000002 +#define UCC_SLOW_GUMR_H_RSYN 0x00000001 + +#define UCC_SLOW_GUMR_L_TCI 0x10000000 +#define UCC_SLOW_GUMR_L_RINV 0x02000000 +#define UCC_SLOW_GUMR_L_TINV 0x01000000 +#define UCC_SLOW_GUMR_L_TEND 0x00020000 +#define UCC_SLOW_GUMR_L_ENR 0x00000020 +#define UCC_SLOW_GUMR_L_ENT 0x00000010 + +/* General UCC FAST Mode Register +*/ +#define UCC_FAST_GUMR_TCI 0x20000000 +#define UCC_FAST_GUMR_TRX 0x10000000 +#define UCC_FAST_GUMR_TTX 0x08000000 +#define UCC_FAST_GUMR_CDP 0x04000000 +#define UCC_FAST_GUMR_CTSP 0x02000000 +#define UCC_FAST_GUMR_CDS 0x01000000 +#define UCC_FAST_GUMR_CTSS 0x00800000 +#define UCC_FAST_GUMR_TXSY 0x00020000 +#define UCC_FAST_GUMR_RSYN 0x00010000 +#define UCC_FAST_GUMR_RTSM 0x00002000 +#define UCC_FAST_GUMR_REVD 0x00000400 +#define UCC_FAST_GUMR_ENR 0x00000020 +#define UCC_FAST_GUMR_ENT 0x00000010 + +/* Slow UCC Event Register (UCCE) +*/ +#define UCC_SLOW_UCCE_GLR 0x1000 +#define UCC_SLOW_UCCE_GLT 0x0800 +#define UCC_SLOW_UCCE_DCC 0x0400 +#define UCC_SLOW_UCCE_FLG 0x0200 +#define UCC_SLOW_UCCE_AB 0x0200 +#define UCC_SLOW_UCCE_IDLE 0x0100 +#define UCC_SLOW_UCCE_GRA 0x0080 +#define UCC_SLOW_UCCE_TXE 0x0010 +#define UCC_SLOW_UCCE_RXF 0x0008 +#define UCC_SLOW_UCCE_CCR 0x0008 +#define UCC_SLOW_UCCE_RCH 0x0008 +#define UCC_SLOW_UCCE_BSY 0x0004 +#define UCC_SLOW_UCCE_TXB 0x0002 +#define UCC_SLOW_UCCE_TX 0x0002 +#define UCC_SLOW_UCCE_RX 0x0001 +#define UCC_SLOW_UCCE_GOV 0x0001 +#define UCC_SLOW_UCCE_GUN 0x0002 +#define UCC_SLOW_UCCE_GINT 0x0004 +#define UCC_SLOW_UCCE_IQOV 0x0008 + +#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \ + UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_RXF| \ + UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR) +#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \ + UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_RXF) +#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \ + UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_TX |UCC_SLOW_UCCE_RX | \ + UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR) +#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY|UCC_SLOW_UCCE_GRA| \ + UCC_SLOW_UCCE_TXB|UCC_SLOW_UCCE_TX |UCC_SLOW_UCCE_RX | \ + UCC_SLOW_UCCE_GLT|UCC_SLOW_UCCE_GLR) +#define UCC_SLOW_UCCE_QMC_SET (UCC_SLOW_UCCE_IQOV|UCC_SLOW_UCCE_GINT| \ + UCC_SLOW_UCCE_GUN|UCC_SLOW_UCCE_GOV) + +#define UCC_SLOW_UCCE_OTHER (UCC_SLOW_UCCE_TXE|UCC_SLOW_UCCE_BSY| \ + UCC_SLOW_UCCE_GRA|UCC_SLOW_UCCE_DCC|UCC_SLOW_UCCE_GLT| \ + UCC_SLOW_UCCE_GLR) + +#define UCC_SLOW_INTR_TX UCC_SLOW_UCCE_TXB +#define UCC_SLOW_INTR_RX (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX) +#define UCC_SLOW_INTR (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX) + +/* Transmit On Demand (UTORD) +*/ +#define UCC_SLOW_TOD 0x8000 +#define UCC_FAST_TOD 0x8000 + +/* Function code masks. +*/ +#define FC_GBL 0x20 +#define FC_DTB_LCL 0x02 +#define UCC_FAST_FUNCTION_CODE_GBL 0x20 +#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02 +#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01 + +#endif /* __QE_H__ */ +#endif /* __KERNEL__ */ diff --git a/drivers/sysdev/qe_lib/qe_common.h b/drivers/sysdev/qe_lib/qe_common.h new file mode 100644 index 0000000..a1bdfe7 --- /dev/null +++ b/drivers/sysdev/qe_lib/qe_common.h @@ -0,0 +1,41 @@ +/* + * drivers/sysdev/qe_lib/qe_common.h + * Description: Common operation of QE + * + * Copyright (C) 2006 Freescale Semiconductor, Inc + * + * Author: Shlomi Gridish <gridish(a)freescale.com> + * + * History: + * 20060601 tanya jiang (tanya.jiang(a)freescale.com) + * Code style fixed; move from cpu/mpc83xx to drivers/sysdev + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __QE_COMMON_H__ +#define __QE_COMMON_H__ + +#include "common.h" +#include "asm/errno.h" +#include "immap_qe.h" +#include "asm/io.h" + +#include "qe.h" +#include "mm.h" + +extern qe_map_t *qe_immr; + +void qe_reset(void); +int qe_issue_cmd(uint cmd, uint device, u8 TypeId, u32 cmd_input); +void qe_setbrg(uint brg, uint rate); +int qe_get_snum(void); +void qe_put_snum(u8 snum); +uint qe_muram_alloc(uint size, uint align); +int qe_muram_free(uint offset); +uint qe_muram_alloc_fixed(uint offset, uint size, uint align); +void qe_muram_dump(void); +void *qe_muram_addr(uint offset); +#endif /* __QE_COMMON_H__ */ -- 1.3.GIT

1 0

[U-Boot-Users] [PATCH 3/6 part 3] Config file for mpc8360epb board
by Jiang Bo-r61859 17 Aug '06

17 Aug '06

Subject: [PATCH] Config file for mpc8360epb board --- include/configs/MPC8360EPB.h | 550 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 550 insertions(+), 0 deletions(-) create mode 100644 include/configs/MPC8360EPB.h 5d94db63a1cbb96922fe194fc5e05791c2a8bcf3 diff --git a/include/configs/MPC8360EPB.h b/include/configs/MPC8360EPB.h new file mode 100644 index 0000000..3604820 --- /dev/null +++ b/include/configs/MPC8360EPB.h @@ -0,0 +1,550 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Author: Mandy Lavi (mandy.lavi(a)freescale.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ +#define CONFIG_E300C1 1 /* E300C1 core specific */ +#define CONFIG_MPC83XX 1 /* MPC83XX family */ +#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ +#define CONFIG_MPC8360EPB 1 /* MPC8360EPB board specific */ + +#define CONFIG_QE 1 + +#define CONFIG_GETH_ENET /* giga ethernet support */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +//#define CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00000000 /* memtest region */ +#define CFG_MEMTEST_END 0x00100000 + +#ifdef CONFIG_PCISLAVE +#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ +#else +#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ +#endif + +#ifndef CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_CLK_FREQ 66000000 +#endif + +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE + +#if defined(CONFIG_SPD_EEPROM) +/* + * Determine DDR configuration from I2C interface. + */ +#define SPD_EEPROM_ADDRESS 0x52 /* DDR DIMM */ +#else +/* + * Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 256 /* Mb */ +#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9) +#define CFG_DDR_TIMING_1 0x37344321 +#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ +#define CFG_DDR_CONTROL 0x42008000 /* unbuffered,no DYN_PWR */ +#define CFG_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */ +#define CFG_DDR_INTERVAL 0x045b0100 /* autocharge,no open page */ +#endif +/* + * SDRAM on the Local Bus + */ +#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 16 /* FLASH size in MB for MPC8360 it is 16M */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 128 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +/* + * BCSR register on local bus 32KB, 8-bit wide for ADS config reg + */ +#define CFG_BCSR 0xF8000000 +#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ +#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */ +#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ + +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000/* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CFG_LBC_LBCR 0x00000000 +#define CFG_LB_SDRAM /* if board has SRDAM on local bus */ + +#ifdef CFG_LB_SDRAM +/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port-size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * + * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into + * FIXME: the top 17 bits of BR2. + */ + +#define CFG_BR2_PRELIM 0xf0001861 /*Port-size=32bit, MSEL=SDRAM */ + +#define CFG_LBLAWBAR2_PRELIM 0xF0000000 + +#define CFG_LBLAWAR2_PRELIM 0x80000019 /*64M */ + +/* + * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + */ + +#define CFG_OR2_PRELIM 0xfc006901 + +#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ + +/* + * LSDMR masks + */ +#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) +#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) + +#define CFG_LBC_LSDMR_COMMON 0x0063b723 + +/* + * SDRAM Controller configuration sequence. + */ +#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_PCHALL) +#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_ARFRSH) +#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_MRW) +#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \ + | CFG_LBC_LSDMR_OP_NORMAL) + +#endif + +#define CFG_LBLAWBAR3_PRELIM 0xF8008000 /* windows base 0xF8008000 */ +#define CFG_LBLAWAR3_PRELIM 0x8000000F /* windows size 64KB */ + +/* PIB CS4 */ +#define CFG_BR4_PRELIM 0xF8008801 /* CS4 base address at 0xF8008000 */ +#define CFG_OR4_PRELIM 0xFFFFE9F7 /* size 32KB, port size 8bit, GPCM */ +/* PIB CS5 */ +#define CFG_BR5_PRELIM 0xF8010801 /* CS5 base address at 0xF8010000 */ +#define CFG_OR5_PRELIM 0xFFFFE9F7 /* size 32KB, port size 8bit, GPCM */ + +/* + * Serial Port + */ +#define CFG_NS16550_SERIAL +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550 +#define CFG_NS16550_CLK get_bus_freq(0) +#undef CONFIG_SERIAL_SOFTWARE_FIFO + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_IMMRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 0x3F /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* +* Internal Definitions +* +* Boot Flags +*/ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_IMMRBAR 0xE0000000 + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_IO_BASE 0xD0000000 +#define CFG_PCI1_IO_PHYS 0xD0000000 +#define CFG_PCI1_IO_SIZE 0x4000000 /* 64M */ + +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE +#define CFG_PCI_SLV_MEM_BUS 0x00000000 +#define CFG_PCI_SLV_MEM_SIZE 0x80000000 + +#ifdef CONFIG_PCI + +#define PCI_ALL_PCI1 + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#define CONFIG_EEPRO100 +//#define CONFIG_E1000 +#undef CONFIG_TULIP +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_GETH_ENET) + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +#define CFG_GETH1_OFFSET 0x24000 +#define CFG_GETH1 (CFG_IMMRBAR+CFG_GETH1_OFFSET) +#define CFG_GETH2_OFFSET 0x25000 +#define CFG_GETH2 (CFG_IMMRBAR+CFG_GETH2_OFFSET) + +#define CONFIG_GMII 1 /* MII PHY management */ +#define CONFIG_MPC83XX_GETH 1 +#define GETH1_PHY_ADDR 0 +#define GETH2_PHY_ADDR 1 +#define GETH1_PHYIDX 0 +#define GETH2_PHYIDX 0 +#define CONFIG_ETHPRIME "Freescale GETH" + +#define CONFIG_HAS_ETH1 + +#endif /* CONFIG_GETH_ENET */ + +/* + * Environment + */ +#ifndef CFG_RAMBOOT +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) +#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ +#define CFG_ENV_SIZE 0x2000 +#else +#define CFG_NO_FLASH 1 /* Flash is not usable now */ +#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) +#define CFG_ENV_SIZE 0x2000 +#endif + +#define CFG_SICRH_VAL 0x00000000 +#define CFG_SICRL_VAL 0x40000000 + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_PCI \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C) \ + & \ + ~(CFG_CMD_ENV \ + | CFG_CMD_LOADS)) +#endif +#else +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PCI \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_ASKENV \ + | CFG_CMD_I2C ) +#endif +#endif + +#include <cmd_confdefs.h> + +/* Cache Configuration */ + +#define CFG_CACHELINE_SIZE 32 +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */ +#endif +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_VCO_1X2 |\ + HRCWL_CE_PLL_VCO_DIV_4 |\ + HRCWL_CE_PLL_DIV_1X1 |\ + HRCWL_CE_TO_PLL_1X6 |\ + HRCWL_CORE_TO_CSB_2X1) + +#ifdef CONFIG_PCISLAVE +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_AGENT |\ + HRCWH_PCI1_ARBITER_DISABLE |\ + HRCWH_PCICKDRV_DISABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT) +#else +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_PCICKDRV_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0XFFF00100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT) +#endif + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK + +#define CFG_HID2 HID2_HBE + +/* BAT Configuration */ +/* DDR: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* IMMRBAR: cache-inhibit and guarded */ +#define CFG_IBAT1L (CFG_IMMRBAR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT1U (CFG_IMMRBAR | BATU_BL_2M | BATU_VS | BATU_VP) +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U + +/* BCSR: cache-inhibit and guarded */ +#define CFG_IBAT2L (CFG_BCSR | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U + +/* FLASH: icache cacheable, but dcache-inhibit and guarded */ +#define CFG_IBAT3L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) +#define CFG_DBAT3L (CFG_FLASH_BASE | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U CFG_IBAT3U + +/* Local bus SDRAM: cacheable */ +#define CFG_IBAT4L (CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT4U (CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP) +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U + +/* Stack in dcache: cacheable, no memory coherence */ +#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10) +#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U + +#ifdef CONFIG_PCI +/* PCI MEM space: cacheable */ +#define CFG_IBAT6L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +/* PCI IO space: cache-inhibit and guarded */ +#define CFG_IBAT7L (CFG_PCI1_IO_PHYS | BATL_PP_10 | \ + BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT7U (CFG_PCI1_IO_PHYS | BATU_BL_16M | BATU_VS | BATU_VP) +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#else +#define CFG_IBAT6L (0) +#define CFG_IBAT6U (0) +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=400000\0" \ + "ramdiskfile=ramfs.83xx\0" \ + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "bootm $loadaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "bootm $loadaddr $ramdiskaddr" + +#define CONFIG_PREBOOT \ + "echo ======================NOTICE============================;" \ + "echo This is the first time that you boot up this board. You are;" \ + "echo required to set a valid MAC address for your Ethernet interface.;"\ + "echo MAKE SURE YOUR MAC ADDRESS IS CORRECTLY ENTERED!;" \ + "echo You can always change it by using setenv ethaddr {MAC address};" \ + "echo to change it again.;" \ + "askenv ethaddr 'Please enter your MAC address:' 17;" \ + "setenv preboot;" \ + "printenv ethaddr;" \ + "saveenv;" + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND + +#endif /* __CONFIG_H */ -- 1.3.GIT

1 0

[U-Boot-Users] [PATCH 3/6 part 2] README file for mpc8360epb board
by Jiang Bo-r61859 17 Aug '06

17 Aug '06

Subject: [PATCH] README file for mpc8360epb board --- doc/README.mpc8360epb | 120 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 120 insertions(+), 0 deletions(-) create mode 100644 doc/README.mpc8360epb ed6dc7598b748cf7176bfa4ed5be679674e088a9 diff --git a/doc/README.mpc8360epb b/doc/README.mpc8360epb new file mode 100644 index 0000000..85bf0e5 --- /dev/null +++ b/doc/README.mpc8360epb @@ -0,0 +1,120 @@ +Freescale MPC8360E PB Board +----------------------------------------- +1. Board Switches and Jumpers +1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC8360E PB board + For some reason, the HW designers describe the switch settings + in terms of 0 and 1, and then map that to physical switches where + the label "On" refers to logic 0 and "Off" is logic 1. + + Switch bits are numbered 1 through, like, 4 6 8 or 10, but the + bits may contribute to signals that are numbered based at 0, + and some of those signals may be high-bit-number-0 too. Heed + well the names and labels and do not get confused. + + "Off" == 1 + "On" == 0 + + SW18 is switch 18 as silk-screened onto the board. + SW4[8] is the bit labled 8 on Switch 4. + SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2. + SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3. + SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On" + and bits labeled 8 is set as "Off". + +1.1 For the MPC8360E PB PROTO Board + + First, make sure the board default setting is consistent with the document shipped with your board. Then apply the following setting: + SW3[1-8]= 0000_0100 (HRCW setting value is performed on local bus) + SW4[1-8]= 0011_0000 (Flash boot on local bus) + SW9[1-8]= 0100_0110 (PCI Mode enabled. HRCW is read from BCSR when CPU bootup) + SW10[1-8]= 0000_1000 (core PLL setting) + SW11[1-8]= 0000_0100 (SW11 is on the another side of the board) + JP6 1-2 + on board Oscillator: 66M + + +2. Memory Map + +2.1. The memory map should look pretty much like this: + + 0x0000_0000 0x7fff_ffff DDR 2G + 0x8000_0000 0x9fff_ffff PCI MEM 512M + 0xc000_0000 0xdfff_ffff Empty 512M + 0xe000_0000 0xe01f_ffff Int Mem Reg Space 1M + 0xf000_0000 0xf7ff_ffff Local Bus SDRAM 128M + 0xf800_0000 0xf800_7fff BCSR on CS1 32K + 0xf800_8000 0xf800_ffff PIB CS4 32K + 0xf801_0000 0xf801_7fff PIB CS5 32K + 0xfe00_0000 0xfeff_ffff FLASH on CS0 16M + + +3. Definitions + +3.1 Explanation of NEW definitions in: + + include/configs/MPC8360EPB.h + + CONFIG_MPC83XX MPC83xx family for both MPC8349 and MPC8360 + CONFIG_MPC8360 MPC8360 specific + CONFIG_MPC8360EPB MPC8360E PB board specific + +4. Compilation + + Assuming you're using BASH shell: + + export CROSS_COMPILE=your-cross-compile-prefix + cd u-boot + make distclean + make MPC8360EPB_config + make + + MPC8360 support PCI in host and slave mode. + + To make u-boot support PCI host 66M : + 1) DIP SW support PCI mode as described in Section 1.1. + 2) Make MPC8360EPB_HOST_66_config + + To make u-boot support PCI host 33M : + 1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1 + 2) Make MPC8360EPB_HOST_33_config + + To make u-boot support PCI slave 66M : + 1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1 + 2) Make MPC8360EPB_HOST_33_config + + +5. Downloading and Flashing Images + +5.0 Download over serial line using Kermit: + + loadb + [Drop to kermit: + ^\c + send <u-boot-bin-image> + c + ] + + + Or via tftp: + + tftp 10000 u-boot.bin + +5.1 Reflash U-boot Image using U-boot + + tftp 20000 u-boot.bin + protect off fef00000 fef3ffff + erase fef00000 fef3ffff + + cp.b 20000 fef00000 xxxx + + or + + cp.b 20000 fef00000 3ffff + + +You have to supply the correct byte count with 'xxxx' from the TFTP result log. +Maybe 3ffff will work too, that corresponds to the erased sectors. + + +6. Notes + 1) The console baudrate for MPC8360EPB is 115200bps. -- 1.3.GIT

1 0

[U-Boot-Users] [PATCH 3/6 part 1] mpc8360epb board support
by Jiang Bo-r61859 17 Aug '06

17 Aug '06

Subject: [PATCH] mpc8360epb board support --- board/mpc8360epb/Makefile | 45 +++ board/mpc8360epb/config.mk | 26 ++ board/mpc8360epb/mpc8360epb.c | 579 +++++++++++++++++++++++++++++++++++++++++ board/mpc8360epb/pci.c | 302 +++++++++++++++++++++ board/mpc8360epb/u-boot.lds | 123 +++++++++ 5 files changed, 1075 insertions(+), 0 deletions(-) create mode 100644 board/mpc8360epb/Makefile create mode 100644 board/mpc8360epb/config.mk create mode 100644 board/mpc8360epb/mpc8360epb.c create mode 100644 board/mpc8360epb/pci.c create mode 100644 board/mpc8360epb/u-boot.lds 078f14f4c929af05403d420ec18c6ae896c9ae23 diff --git a/board/mpc8360epb/Makefile b/board/mpc8360epb/Makefile new file mode 100644 index 0000000..7e47c67 --- /dev/null +++ b/board/mpc8360epb/Makefile @@ -0,0 +1,45 @@ +# +# Copyright (C) 2006 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := $(BOARD).o pci.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +####################################################################### ## + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +####################################################################### ## diff --git a/board/mpc8360epb/config.mk b/board/mpc8360epb/config.mk new file mode 100644 index 0000000..f740db3 --- /dev/null +++ b/board/mpc8360epb/config.mk @@ -0,0 +1,26 @@ +# Copyright (C) 2006 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# MPC8360EPB +# + +TEXT_BASE = 0xFEF00000 diff --git a/board/mpc8360epb/mpc8360epb.c b/board/mpc8360epb/mpc8360epb.c new file mode 100644 index 0000000..ff23040 --- /dev/null +++ b/board/mpc8360epb/mpc8360epb.c @@ -0,0 +1,579 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * Author: Mandy Lavi (mandy.lavi(a)freescale.com) + * + * Modifier: Xiaobo Xie <r63061(a)freescale.com> & Dave Liu <r63238(a)freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <i2c.h> +#include <spd.h> +#include <miiphy.h> +#include <command.h> +#if defined(CONFIG_PCI) +#include <pci.h> +#endif +#if defined(CONFIG_SPD_EEPROM) +#include <spd_sdram.h> +#else +#include <asm/mmu.h> +#endif + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif + +int fixed_sdram(void); +void sdram_init(void); + +int board_early_init_f(void) +{ + volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; + + /* Enable flash write */ + bcsr[0xa] &= ~0x04; + + return 0; +} + +long int initdram(int board_type) +{ + volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; +#if defined(CONFIG_SPD_EEPROM) + msize = spd_sdram(); +#else + msize = fixed_sdram(); +#endif + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) + /* + * Initialize DDR ECC byte + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + /* + * Initialize SDRAM if it is on local bus. + */ + sdram_init(); + puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +#if !defined(CONFIG_SPD_EEPROM) +/********************************************************************** *** + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************ / +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *) CFG_IMMRBAR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CFG_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) { + return -1; + } + } + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); +#if (CFG_DDR_SIZE != 256) +#warning Currenly any ddr size other than 256 is not supported +#endif + im->ddr.csbnds[0].csbnds = 0x00000007; + im->ddr.csbnds[1].csbnds = 0x0008000f; + + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + im->ddr.cs_config[1] = CFG_DDR_CONFIG; + + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.sdram_cfg = CFG_DDR_CONTROL; + + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + udelay(200); + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} +#endif /*!CFG_SPD_EEPROM */ + +int checkboard(void) +{ + puts("Board: Freescale MPC8360EPB\n"); + return 0; +} + +/* +if MPC8360EPB is soldered with SDRAM +*/ +#if defined(CFG_BR2_PRELIM) \ + && defined(CFG_OR2_PRELIM) \ + && defined(CFG_LBLAWBAR2_PRELIM) \ + && defined(CFG_LBLAWAR2_PRELIM) +/* + * Initialize SDRAM memory on the Local Bus. + */ + +void sdram_init(void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile lbus83xx_t *lbc = &immap->lbus; + uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE; + + puts("\n SDRAM on Local Bus: "); + print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + /* + * Setup SDRAM Base and Option Registers, already done in cpu_init.c + */ + /*setup mtrpt, lsrt and lbcr for LB bus */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + + /* + * Configure the SDRAM controller Machine Mode Register. + */ + lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ + lbc->lsdmr = CFG_LBC_LSDMR_1; /*0x68636733;precharge all the banks */ + asm("sync"); + *sdram_addr = 0xff; + udelay(100); + + lbc->lsdmr = CFG_LBC_LSDMR_2; /*0x48636733;auto refresh */ + asm("sync"); + /*1 times*/ + *sdram_addr = 0xff; + udelay(100); + /*2 times*/ + *sdram_addr = 0xff; + udelay(100); + /*3 times*/ + *sdram_addr = 0xff; + udelay(100); + /*4 times*/ + *sdram_addr = 0xff; + udelay(100); + /*5 times*/ + *sdram_addr = 0xff; + udelay(100); + /*6 times*/ + *sdram_addr = 0xff; + udelay(100); + /*7 times*/ + *sdram_addr = 0xff; + udelay(100); + /*8 times*/ + *sdram_addr = 0xff; + udelay(100); + + /*0x58636733;mode register write operation */ + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + *(sdram_addr + 0xcc) = 0xff; + udelay(100); + + /*0x40636733;normal operation */ + lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000; + asm("sync"); + *sdram_addr = 0xff; + udelay(100); +} +#else +void sdram_init(void) +{ + puts("SDRAM on Local Bus is NOT available!\n"); +} +#endif + +#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) +/* + * ECC user commands + */ +void ecc_print_status(void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile ddr83xx_t *ddr = &immap->ddr; + + printf("\nECC mode: %s\n\n", + (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); + + /* Interrupts */ + printf("Memory Error Interrupt Enable:\n"); + printf(" Multiple-Bit Error Interrupt Enable: %d\n", + (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0); + printf(" Single-Bit Error Interrupt Enable: %d\n", + (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0); + printf(" Memory Select Error Interrupt Enable: %d\n\n", + (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0); + + /* Error disable */ + printf("Memory Error Disable:\n"); + printf(" Multiple-Bit Error Disable: %d\n", + (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0); + printf(" Sinle-Bit Error Disable: %d\n", + (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0); + printf(" Memory Select Error Disable: %d\n\n", + (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0); + + /* Error injection */ + printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n", + ddr->data_err_inject_hi, ddr->data_err_inject_lo); + + printf("Memory Data Path Error Injection Mask ECC:\n"); + printf(" ECC Mirror Byte: %d\n", + (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0); + printf(" ECC Injection Enable: %d\n", + (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0); + printf(" ECC Error Injection Mask: 0x%02x\n\n", + ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM); + + /* SBE counter/threshold */ + printf("Memory Single-Bit Error Management (0..255):\n"); + printf(" Single-Bit Error Threshold: %d\n", + (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT); + printf(" Single-Bit Error Counter: %d\n\n", + (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT); + + /* Error detect */ + printf("Memory Error Detect:\n"); + printf(" Multiple Memory Errors: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0); + printf(" Multiple-Bit Error: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0); + printf(" Single-Bit Error: %d\n", + (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0); + printf(" Memory Select Error: %d\n\n", + (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0); + + /* Capture data */ + printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address); + printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n", + ddr->capture_data_hi, ddr->capture_data_lo); + printf("Memory Data Path Read Capture ECC: 0x%02x\n\n", + ddr->capture_ecc & CAPTURE_ECC_ECE); + + printf("Memory Error Attributes Capture:\n"); + printf(" Data Beat Number: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> + ECC_CAPT_ATTR_BNUM_SHIFT); + printf(" Transaction Size: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> + ECC_CAPT_ATTR_TSIZ_SHIFT); + printf(" Transaction Source: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> + ECC_CAPT_ATTR_TSRC_SHIFT); + printf(" Transaction Type: %d\n", + (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> + ECC_CAPT_ATTR_TTYP_SHIFT); + printf(" Error Information Valid: %d\n\n", + ddr->capture_attributes & ECC_CAPT_ATTR_VLD); +} + +int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMRBAR; + volatile ddr83xx_t *ddr = &immap->ddr; + volatile u32 val; + u64 *addr; + u32 count; + register u64 *i; + u32 ret[2]; + u32 pattern[2]; + u32 writeback[2]; + + pattern[0] = 0xfedcba98UL; + pattern[1] = 0x76543210UL; + + writeback[0] = 0x01234567UL; + writeback[1] = 0x89abcdefUL; + + if (argc > 4) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (argc == 2) { + if (strcmp(argv[1], "status") == 0) { + ecc_print_status(); + return 0; + } else if (strcmp(argv[1], "captureclear") == 0) { + ddr->capture_address = 0; + ddr->capture_data_hi = 0; + ddr->capture_data_lo = 0; + ddr->capture_ecc = 0; + ddr->capture_attributes = 0; + return 0; + } + } + if (argc == 3) { + if (strcmp(argv[1], "sbecnt") == 0) { + val = simple_strtoul(argv[2], NULL, 10); + if (val > 255) { + printf("Incorrect Counter value, " + "should be 0..255\n"); + return 1; + } + + val = (val << ECC_ERROR_MAN_SBEC_SHIFT); + val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET); + + ddr->err_sbe = val; + return 0; + } else if (strcmp(argv[1], "sbethr") == 0) { + val = simple_strtoul(argv[2], NULL, 10); + if (val > 255) { + printf("Incorrect Counter value, " + "should be 0..255\n"); + return 1; + } + + val = (val << ECC_ERROR_MAN_SBET_SHIFT); + val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC); + + ddr->err_sbe = val; + return 0; + } else if (strcmp(argv[1], "errdisable") == 0) { + val = ddr->err_disable; + + if (strcmp(argv[2], "+sbe") == 0) { + val |= ECC_ERROR_DISABLE_SBED; + } else if (strcmp(argv[2], "+mbe") == 0) { + val |= ECC_ERROR_DISABLE_MBED; + } else if (strcmp(argv[2], "+mse") == 0) { + val |= ECC_ERROR_DISABLE_MSED; + } else if (strcmp(argv[2], "+all") == 0) { + val |= (ECC_ERROR_DISABLE_SBED | + ECC_ERROR_DISABLE_MBED | + ECC_ERROR_DISABLE_MSED); + } else if (strcmp(argv[2], "-sbe") == 0) { + val &= ~ECC_ERROR_DISABLE_SBED; + } else if (strcmp(argv[2], "-mbe") == 0) { + val &= ~ECC_ERROR_DISABLE_MBED; + } else if (strcmp(argv[2], "-mse") == 0) { + val &= ~ECC_ERROR_DISABLE_MSED; + } else if (strcmp(argv[2], "-all") == 0) { + val &= ~(ECC_ERROR_DISABLE_SBED | + ECC_ERROR_DISABLE_MBED | + ECC_ERROR_DISABLE_MSED); + } else { + printf("Incorrect err_disable field\n"); + return 1; + } + + ddr->err_disable = val; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + return 0; + } else if (strcmp(argv[1], "errdetectclr") == 0) { + val = ddr->err_detect; + + if (strcmp(argv[2], "mme") == 0) { + val |= ECC_ERROR_DETECT_MME; + } else if (strcmp(argv[2], "sbe") == 0) { + val |= ECC_ERROR_DETECT_SBE; + } else if (strcmp(argv[2], "mbe") == 0) { + val |= ECC_ERROR_DETECT_MBE; + } else if (strcmp(argv[2], "mse") == 0) { + val |= ECC_ERROR_DETECT_MSE; + } else if (strcmp(argv[2], "all") == 0) { + val |= (ECC_ERROR_DETECT_MME | + ECC_ERROR_DETECT_MBE | + ECC_ERROR_DETECT_SBE | + ECC_ERROR_DETECT_MSE); + } else { + printf("Incorrect err_detect field\n"); + return 1; + } + + ddr->err_detect = val; + return 0; + } else if (strcmp(argv[1], "injectdatahi") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + + ddr->data_err_inject_hi = val; + return 0; + } else if (strcmp(argv[1], "injectdatalo") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + + ddr->data_err_inject_lo = val; + return 0; + } else if (strcmp(argv[1], "injectecc") == 0) { + val = simple_strtoul(argv[2], NULL, 16); + if (val > 0xff) { + printf("Incorrect ECC inject mask, " + "should be 0x00..0xff\n"); + return 1; + } + val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM); + + ddr->ecc_err_inject = val; + return 0; + } else if (strcmp(argv[1], "inject") == 0) { + val = ddr->ecc_err_inject; + + if (strcmp(argv[2], "en") == 0) + val |= ECC_ERR_INJECT_EIEN; + else if (strcmp(argv[2], "dis") == 0) + val &= ~ECC_ERR_INJECT_EIEN; + else + printf("Incorrect command\n"); + + ddr->ecc_err_inject = val; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + return 0; + } else if (strcmp(argv[1], "mirror") == 0) { + val = ddr->ecc_err_inject; + + if (strcmp(argv[2], "en") == 0) + val |= ECC_ERR_INJECT_EMB; + else if (strcmp(argv[2], "dis") == 0) + val &= ~ECC_ERR_INJECT_EMB; + else + printf("Incorrect command\n"); + + ddr->ecc_err_inject = val; + return 0; + } + } + if (argc == 4) { + if (strcmp(argv[1], "testdw") == 0) { + addr = (u64 *) simple_strtoul(argv[2], NULL, 16); + count = simple_strtoul(argv[3], NULL, 16); + + if ((u32) addr % 8) { + printf("Address not alligned on " + "double word boundary\n"); + return 1; + } + disable_interrupts(); + + for (i = addr; i < addr + count; i++) { + + /* enable injects */ + ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + + /* write memory location injecting errors */ + ppcDWstore((u32 *) i, pattern); + + /* disable injects */ + ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + + /* read data, this generates ECC error */ + ppcDWload((u32 *) i, ret); + + /* re-initialize memory, double word write the location again, + * generates new ECC code this time */ + ppcDWstore((u32 *) i, writeback); + } + enable_interrupts(); + return 0; + } + if (strcmp(argv[1], "testword") == 0) { + addr = (u64 *) simple_strtoul(argv[2], NULL, 16); + count = simple_strtoul(argv[3], NULL, 16); + + if ((u32) addr % 8) { + printf("Address not alligned on " + "double word boundary\n"); + return 1; + } + disable_interrupts(); + + for (i = addr; i < addr + count; i++) { + + /* enable injects */ + ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + + /* write memory location injecting errors */ + *(u32 *) i = 0xfedcba98UL; + __asm__ __volatile__("sync"); + + /* sub double word write, + * bus will read-modify-write, + * generates ECC error */ + *((u32 *) i + 1) = 0x76543210UL; + __asm__ __volatile__("sync"); + + /* disable injects */ + ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; + __asm__ __volatile__("sync"); + __asm__ __volatile__("isync"); + + /* re-initialize memory, + * double word write the location again, + * generates new ECC code this time */ + ppcDWstore((u32 *) i, writeback); + } + enable_interrupts(); + return 0; + } + } + printf("Usage:\n%s\n", cmdtp->usage); + return 1; +} + +U_BOOT_CMD(ecc, 4, 0, do_ecc, + "ecc - support for DDR ECC features\n", + "status - print out status info\n" + "ecc captureclear - clear capture regs data\n" + "ecc sbecnt <val> - set Single-Bit Error counter\n" + "ecc sbethr <val> - set Single-Bit Threshold\n" + "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n" + " [-|+]sbe - Single-Bit Error\n" + " [-|+]mbe - Multiple-Bit Error\n" + " [-|+]mse - Memory Select Error\n" + " [-|+]all - all errors\n" + "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n" + " mme - Multiple Memory Errors\n" + " sbe - Single-Bit Error\n" + " mbe - Multiple-Bit Error\n" + " mse - Memory Select Error\n" + " all - all errors\n" + "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n" + "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n" + "ecc injectecc <ecc> - set ECC Error Injection Mask\n" + "ecc inject <en|dis> - enable/disable error injection\n" + "ecc mirror <en|dis> - enable/disable mirror byte\n" + "ecc testdw <addr> <cnt> - test mem region with double word access:\n" + " - enables injects\n" + " - writes pattern injecting errors with double word access\n" + " - disables injects\n" + " - reads pattern back with double word access, generates error\n" + " - re-inits memory\n" + "ecc testword <addr> <cnt> - test mem region with word access:\n" + " - enables injects\n" + " - writes pattern injecting errors with word access\n" + " - writes pattern with word access, generates error\n" + " - disables injects\n" " - re-inits memory"); +#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */ diff --git a/board/mpc8360epb/pci.c b/board/mpc8360epb/pci.c new file mode 100644 index 0000000..6634d44 --- /dev/null +++ b/board/mpc8360epb/pci.c @@ -0,0 +1,302 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* + * PCI Configuration space access support for MPC83xx PCI Bridge + */ +#include <asm/mmu.h> +#include <asm/io.h> +#include <common.h> +#include <pci.h> +#include <i2c.h> + +#include <asm/i2c.h> + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_PCI) +#define PCI_FUNCTION_CONFIG 0x44 +#define PCI_FUNCTION_CFG_LOCK 0x20 + +/* + * Initialize PCI Devices, report devices found + */ +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxads_config_table[] = { + { + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + pci_cfgfunc_config_device, + {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} + }, + {} +} +#endif +static struct pci_controller hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxads_config_table, +#endif + }, +}; + +/********************************************************************** **** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + *********************************************************************/ +void pci_init_board(void) +#ifdef CONFIG_PCISLAVE +{ + u16 reg16; + volatile immap_t *immr; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + immr = (immap_t *) CFG_IMMRBAR; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar0 = 0x0; + pci_ctrl[0].pibar0 = 0x0; + pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | PIWAR_IWS_4K; + + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 &= ~PIWAR_EN; + + pci_ctrl[0].pitar2 = 0x0; + pci_ctrl[0].pibar2 = 0x0; + pci_ctrl[0].piebar2 = 0x0; + pci_ctrl[0].piwar2 &= ~PIWAR_EN; + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + pci_setup_indirect(&hose[0], + (CFG_IMMRBAR + 0x8300), (CFG_IMMRBAR + 0x8304)); + reg16 = 0xff; + + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, &reg16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_STATUS, 0xffff); + pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), + PCI_LATENCY_TIMER, 0x80); + + /* + * Unlock configuration lock in PCI function configuration register. + */ + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, &reg16); + reg16 &= ~(PCI_FUNCTION_CFG_LOCK); + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_FUNCTION_CONFIG, reg16); + + printf("Enabled PCI 32bit Agent Mode\n"); +} +#else +{ + volatile immap_t *immr; + volatile clk83xx_t *clk; + volatile law83xx_t *pci_law; + volatile pot83xx_t *pci_pot; + volatile pcictrl83xx_t *pci_ctrl; + volatile pciconf83xx_t *pci_conf; + + u8 val8, ret; + u16 reg16; + u32 val32, tmp32; + + immr = (immap_t *) CFG_IMMRBAR; + clk = (clk83xx_t *) & immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + val32 = clk->occr; + udelay(2000); +#if defined(PCI_66M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#elif defined(PCI_33M) + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | + OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; + printf("PCI clock is 33MHz\n"); +#else + clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; + printf("PCI clock is 66MHz\n"); +#endif + udelay(2000); + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_64M; + + /* + * Configure PCI Outbound Translation Windows + */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK); + + /* mapped to PCI1 IO space to local 0xD0000000 */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_64M & POCMR_CM_MASK); + /* + * Configure PCI Inbound Translation Windows + */ + pci_ctrl[0].pitar1 = (CFG_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; + pci_ctrl[0].pibar1 = (CFG_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | + PIWAR_IWS_2G; + + /* + * Assign PIB PMC slot to desired PCI bus + */ + mpc83xx_i2c = (i2c_t *) (CFG_IMMRBAR + CFG_I2C2_OFFSET); + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + + val8 = 0; + ret = i2c_write(0x23, 0x6, 1, &val8, 1); + ret = i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + ret = i2c_write(0x23, 0x2, 1, &val8, 1); + ret = i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + ret = i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + ret = i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(PCI_64BIT) + val8 = 0xf4; /*PMC2<->PCI1 64bit */ +#elif defined(PCI_ALL_PCI1) + val8 = 0xf3; /*PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI1 32bit */ +#elif defined(PCI_ONE_PCI1) + val8 = 0xf9; /* PMC1<->PCI1,PMC2<->PCI2,PMC3<->PCI2 32bit */ +#elif defined(PCI_TWO_PCI1) + val8 = 0xf5; /* PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI2 32bit */ +#else + val8 = 0xf3; +#endif + ret = i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + ret = i2c_write(0x26, 0x3, 1, &val8, 1); + + val8 = 0; + ret = i2c_write(0x27, 0x6, 1, &val8, 1); + ret = i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + ret = i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + ret = i2c_write(0x27, 0x3, 1, &val8, 1); + asm("eieio"); + + /* + * Release PCI RST Output signal + */ + udelay(2000); + pci_ctrl[0].gcr = 1; + udelay(2000); + + hose[0].first_busno = 0; + hose[0].last_busno = 0xff; + + pci_set_region( hose[0].regions + 0, + CFG_PCI_SLV_MEM_LOCAL, + CFG_PCI_SLV_MEM_BUS, + CFG_PCI_SLV_MEM_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + pci_set_region( hose[0].regions + 1, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + pci_set_region( hose[0].regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + hose[0].region_count = 3; + + pci_setup_indirect(&hose[0], + (CFG_IMMRBAR + 0x8300), + (CFG_IMMRBAR + 0x8304)); +#define PCI_CLASS_BRIDGE 0x06 + reg16 = 0xff; + tmp32 = 0xffff; + pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), + PCI_CLASS_CODE, PCI_CLASS_BRIDGE); + + pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, &reg16); + + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), + PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), PCI_STATUS, + 0xffff); + pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), + PCI_LATENCY_TIMER, 0x80); + +#if defined(PCI_64BIT) + printf("PCI1 64bit on PMC2\n"); +#elif defined(PCI_ALL_PCI1) + printf("PCI1 32bit on PMC1 & PMC2 & PMC3\n"); +#elif defined(PCI_ONE_PCI1) + printf("PCI1 32bit on PMC1,PCI2 32bit on PMC2 & PMC3\n"); +#else + printf("PCI1 32bit on PMC1 & PMC2 & PMC3 in default\n"); +#endif + + /* + * Hose scan. + */ + pci_register_hose(hose); + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCISLAVE */ +#endif /* CONFIG_PCI */ diff --git a/board/mpc8360epb/u-boot.lds b/board/mpc8360epb/u-boot.lds new file mode 100644 index 0000000..937c87a --- /dev/null +++ b/board/mpc8360epb/u-boot.lds @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc83xx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} +ENTRY(_start) -- 1.3.GIT

1 0

[U-Boot-Users] [PATCH 2/6 part3] Consolidate mpc83xx.h to support both 8349e and mpc8360e
by Jiang Bo-r61859 17 Aug '06

17 Aug '06

Subject: [PATCH] Consolidate mpc83xx.h to support both 8349e and mpc8360e --- include/mpc83xx.h | 125 ++++++++++++++++++++++++++++++++++++++++++++++++----- 1 files changed, 114 insertions(+), 11 deletions(-) 05038b7c01c6f98e00517fd81903506bc32bb3fb diff --git a/include/mpc83xx.h b/include/mpc83xx.h index ea40bad..a8cf334 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -1,23 +1,18 @@ /* - * Copyright 2004 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. * + * History : + * 20060601: Daveliu (daveliu(a)freescale.com) + * TanyaJiang (tanya.jiang(a)freescale.com) + * Consolidated for mpc8360 + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA */ /* @@ -29,6 +24,7 @@ #ifndef __MPC83XX_H__ #define __MPC83XX_H__ +#include <config.h> #if defined(CONFIG_E300) #include <asm/e300.h> #endif @@ -85,6 +81,14 @@ #define LBLAWAR2 0x0034 #define LBLAWBAR3 0x0038 #define LBLAWAR3 0x003C +/* + * The device ID and revision numbers + */ +#define SPR_8349E_REV10 0x80300100 +#define SPR_8349E_REV11 0x80300101 +#define SPR_8360E_REV10 0x80480010 +#define SPR_8360E_REV11 0x80480011 +#define SPR_8360E_REV12 0x80480012 /* * Base Registers & Option Registers @@ -116,9 +120,17 @@ #define BR_MS_SDRAM 0x00000060 /* SDRAM #define BR_MS_UPMA 0x00000080 /* UPMA */ #define BR_MS_UPMB 0x000000A0 /* UPMB */ #define BR_MS_UPMC 0x000000C0 /* UPMC */ +#if defined (CONFIG_MPC8360) +#define BR_ATOM 0x0000000C +#define BR_ATOM_SHIFT 2 +#endif #define BR_V 0x00000001 #define BR_V_SHIFT 0 +#if defined (CONFIG_MPC8349) #define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) +#elif defined (CONFIG_MPC8360) +#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V) +#endif #define OR0 0x5004 #define OR1 0x500C @@ -201,14 +213,21 @@ #define OR_SDRAM_EAD_SHIFT 0 #define HRCWH_PCI_AGENT 0x00000000 #define HRCWH_PCI_HOST 0x80000000 +#if defined (CONFIG_MPC8349) #define HRCWH_32_BIT_PCI 0x00000000 #define HRCWH_64_BIT_PCI 0x40000000 +#endif #define HRCWH_PCI1_ARBITER_DISABLE 0x00000000 #define HRCWH_PCI1_ARBITER_ENABLE 0x20000000 +#if defined (CONFIG_MPC8349) #define HRCWH_PCI2_ARBITER_DISABLE 0x00000000 #define HRCWH_PCI2_ARBITER_ENABLE 0x10000000 +#elif defined (CONFIG_MPC8360) +#define HRCWH_PCICKDRV_DISABLE 0x00000000 +#define HRCWH_PCICKDRV_ENABLE 0x10000000 +#endif #define HRCWH_CORE_DISABLE 0x08000000 #define HRCWH_CORE_ENABLE 0x00000000 @@ -225,11 +244,14 @@ #define HRCWH_SW_WATCHDOG_ENABLE 0x0 #define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000 #define HRCWH_ROM_LOC_PCI1 0x00100000 +#if defined (CONFIG_MPC8349) #define HRCWH_ROM_LOC_PCI2 0x00200000 +#endif #define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 #define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 +#if defined (CONFIG_MPC8349) #define HRCWH_TSEC1M_IN_RGMII 0x00000000 #define HRCWH_TSEC1M_IN_RTBI 0x00004000 #define HRCWH_TSEC1M_IN_GMII 0x00008000 @@ -239,10 +261,22 @@ #define HRCWH_TSEC2M_IN_RGMII 0x0 #define HRCWH_TSEC2M_IN_RTBI 0x00001000 #define HRCWH_TSEC2M_IN_GMII 0x00002000 #define HRCWH_TSEC2M_IN_TBI 0x00003000 +#endif + +#if defined (CONFIG_MPC8360) +#define HRCWH_SECONDARY_DDR_DISABLE 0x00000000 +#define HRCWH_SECONDARY_DDR_ENABLE 0x00000010 +#endif #define HRCWH_BIG_ENDIAN 0x00000000 #define HRCWH_LITTLE_ENDIAN 0x00000008 +#define HRCWH_LALE_NORMAL 0x00000000 +#define HRCWH_LALE_EARLY 0x00000004 + +#define HRCWH_LDP_SET 0x00000000 +#define HRCWH_LDP_CLEAR 0x00000002 + /* * Hard Reset Configration Word - Low */ @@ -281,6 +315,47 @@ #define HRCWL_CORE_TO_CSB_2X1 0x0 #define HRCWL_CORE_TO_CSB_2_5X1 0x00050000 #define HRCWL_CORE_TO_CSB_3X1 0x00060000 +#if defined (CONFIG_MPC8360) +#define HRCWL_CE_PLL_VCO_DIV_4 0x00000000 +#define HRCWL_CE_PLL_VCO_DIV_8 0x00000040 +#define HRCWL_CE_PLL_VCO_DIV_2 0x00000080 + +#define HRCWL_CE_PLL_DIV_1X1 0x00000000 +#define HRCWL_CE_PLL_DIV_2X1 0x00000020 + +#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 +#define HRCWL_CE_TO_PLL_1X2 0x00000002 +#define HRCWL_CE_TO_PLL_1X3 0x00000003 +#define HRCWL_CE_TO_PLL_1X4 0x00000004 +#define HRCWL_CE_TO_PLL_1X5 0x00000005 +#define HRCWL_CE_TO_PLL_1X6 0x00000006 +#define HRCWL_CE_TO_PLL_1X7 0x00000007 +#define HRCWL_CE_TO_PLL_1X8 0x00000008 +#define HRCWL_CE_TO_PLL_1X9 0x00000009 +#define HRCWL_CE_TO_PLL_1X10 0x0000000A +#define HRCWL_CE_TO_PLL_1X11 0x0000000B +#define HRCWL_CE_TO_PLL_1X12 0x0000000C +#define HRCWL_CE_TO_PLL_1X13 0x0000000D +#define HRCWL_CE_TO_PLL_1X14 0x0000000E +#define HRCWL_CE_TO_PLL_1X15 0x0000000F +#define HRCWL_CE_TO_PLL_1X16 0x00000010 +#define HRCWL_CE_TO_PLL_1X17 0x00000011 +#define HRCWL_CE_TO_PLL_1X18 0x00000012 +#define HRCWL_CE_TO_PLL_1X19 0x00000013 +#define HRCWL_CE_TO_PLL_1X20 0x00000014 +#define HRCWL_CE_TO_PLL_1X21 0x00000015 +#define HRCWL_CE_TO_PLL_1X22 0x00000016 +#define HRCWL_CE_TO_PLL_1X23 0x00000017 +#define HRCWL_CE_TO_PLL_1X24 0x00000018 +#define HRCWL_CE_TO_PLL_1X25 0x00000019 +#define HRCWL_CE_TO_PLL_1X26 0x0000001A +#define HRCWL_CE_TO_PLL_1X27 0x0000001B +#define HRCWL_CE_TO_PLL_1X28 0x0000001C +#define HRCWL_CE_TO_PLL_1X29 0x0000001D +#define HRCWL_CE_TO_PLL_1X30 0x0000001E +#define HRCWL_CE_TO_PLL_1X31 0x0000001F +#endif + /* * LCRR - Clock Ratio Register (10.3.1.16) */ @@ -310,4 +385,32 @@ #define LCRR_CLKDIV_4 0x00000004 #define LCRR_CLKDIV_8 0x00000008 #define LCRR_CLKDIV_SHIFT 0 +/* + * SCCR-System Clock Control Register + */ +#define SCCR_TSEC1CM_0 0x00000000 +#define SCCR_TSEC1CM_1 0x40000000 +#define SCCR_TSEC1CM_2 0x80000000 +#define SCCR_TSEC1CM_3 0xC0000000 +#define SCCR_TSEC2CM_0 0x00000000 +#define SCCR_TSEC2CM_1 0x10000000 +#define SCCR_TSEC2CM_2 0x20000000 +#define SCCR_TSEC2CM_3 0x30000000 +#define SCCR_ENCCM_0 0x00000000 +#define SCCR_ENCCM_1 0x01000000 +#define SCCR_ENCCM_2 0x02000000 +#define SCCR_ENCCM_3 0x03000000 +#define SCCR_USBCM_0 0x00000000 +#define SCCR_USBCM_1 0x00500000 +#define SCCR_USBCM_2 0x00A00000 +#define SCCR_USBCM_3 0x00F00000 + +#define SCCR_CLK_MASK ( SCCR_TSEC1CM_3 \ + | SCCR_TSEC2CM_3 \ + | SCCR_ENCCM_3 \ + | SCCR_USBCM_3 ) + +#define SCCR_DEFAULT 0xFFFFFFFF + #endif /* __MPC83XX_H__ */ + -- 1.3.GIT

1 0

[U-Boot-Users] Your future, Moscow international
by Romeo Byers 17 Aug '06

17 Aug '06

Worried about the loss of erectoin? EVEN if you have no erectoin problems SOFT CIACLIS would help you to bring back some romantic moments that u lost in past. Just disolve half a pil under your tongue and get ready for action in 15 minutes. SOFT CIA2LIS! It makes your lovemaking incredible! VISIT US TODAY, AND GET OUR SPECIAL 70% DISCFOUNT OFER! http://uklggj.ecolwooly.com/?83728514 Instant shipping worldwide. Absolutely CONFIDENTIAL and SECURE purchase. ------------------ You won't forget it. Conclusion

1 0

[U-Boot-Users] [PATCH] Removed unused resetvec.S from cpu/mpc83xx
by Jiang Bo-r61859 17 Aug '06

17 Aug '06

Subject: [PATCH] Removed unused resetvec.S from cpu/mpc83xx --- Makefile | 3 --- cpu/mpc83xx/Makefile | 3 +-- cpu/mpc83xx/resetvec.S | 6 ------ 3 files changed, 1 insertions(+), 11 deletions(-) delete mode 100644 cpu/mpc83xx/resetvec.S 2c1abd928843e9660b3b8f88253011e6be7f1a0e diff --git a/Makefile b/Makefile index c65bb4b..d72284c 100644 --- a/Makefile +++ b/Makefile @@ -108,9 +108,6 @@ endif ifeq ($(CPU),ppc4xx) OBJS += cpu/$(CPU)/resetvec.o endif -ifeq ($(CPU),mpc83xx) -OBJS += cpu/$(CPU)/resetvec.o -endif ifeq ($(CPU),mpc85xx) OBJS += cpu/$(CPU)/resetvec.o endif diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile index 60df4cd..753a002 100644 --- a/cpu/mpc83xx/Makefile +++ b/cpu/mpc83xx/Makefile @@ -24,8 +24,7 @@ include $(TOPDIR)/config.mk LIB = lib$(CPU).a -START = start.o \ - resetvec.o +START = start.o COBJS = traps.o \ cpu.o \ diff --git a/cpu/mpc83xx/resetvec.S b/cpu/mpc83xx/resetvec.S deleted file mode 100644 index 3dfcd0d..0000000 --- a/cpu/mpc83xx/resetvec.S +++ /dev/null @@ -1,6 +0,0 @@ - .section .resetvec,"ax" -#ifndef FIXME -#if 0 - b _start_e500 -#endif -#endif -- 1.3.GIT

3 2

Re: [U-Boot-Users] [DNX#2006081742000114] test iy
by U-Boot patch tracking system 17 Aug '06

17 Aug '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006081742000114]. Please keep this ticked ID string in the subject line of any e-mail replies!!! Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0

Re: [U-Boot-Users] [DNX#2006081742000105] [PATCH 6/6 ] Unified variable names and consolidat [...]
by DENX Support System 17 Aug '06

17 Aug '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006081742000105] was created: <snip> > Subject: [PATCH] Unified variable names and consolidated macro for > TQM834x > > --- > > board/tqm834x/pci.c | 12 ++++++------ > include/configs/TQM834x.h | 12 ++++++++++++ > 2 files changed, 18 insertions(+), 6 deletions(-) > > 205d48a033f0f2118845d26119416888f7e7c2f8 > diff --git a/board/tqm834x/pci.c b/board/tqm834x/pci.c > index 5a23e6c..d01277f 100644 > --- a/board/tqm834x/pci.c > +++ b/board/tqm834x/pci.c > @@ -69,17 +69,17 @@ void > pci_init_board(void) > { > volatile immap_t * immr; > - volatile clk8349_t * clk; > - volatile law8349_t * pci_law; > - volatile pot8349_t * pci_pot; > - volatile pcictrl8349_t * pci_ctrl; > - volatile pciconf8349_t * pci_conf; > + volatile clk83xx_t * clk; > + volatile law83xx_t * pci_law; > + volatile pot83xx_t * pci_pot; > + volatile pcictrl83xx_t * pci_ctrl; > + volatile pciconf83xx_t * pci_conf; > u16 reg16; > u32 reg32; > struct pci_controller * hose; > > immr = (immap_t *)CFG_IMMRBAR; > - clk = (clk8349_t *)&immr->clk; > + clk = (clk83xx_t *)&immr->clk; > pci_law = immr->sysconf.pcilaw; > pci_pot = immr->ios.pot; > pci_ctrl = immr->pci_ctrl; > diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h > index cec7e3e..5c469bf 100644 > --- a/include/configs/TQM834x.h > +++ b/include/configs/TQM834x.h > @@ -36,6 +36,7 @@ #undef DEBUG > */ > #define CONFIG_E300 1 /* E300 Family */ > #define CONFIG_MPC83XX 1 /* MPC83XX family */ > +#define CONFIG_MPC8349 1 /* MPC8349 specific */ > #define CONFIG_MPC834X 1 /* MPC834X specific */ > #define CONFIG_TQM834X 1 /* TQM834X board specific */ > > @@ -56,6 +57,17 @@ #define CONFIG_83XX_CLKIN 66666000 /* 66 > */ > #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) > > +#define CFG_SCCR_INIT (SCCR_DEFAULT & (~SCCR_CLK_MASK)) > +#define CFG_SCCR_TSEC1CM SCCR_TSEC1CM_1 /* TSEC1 clock setting > */ > +#define CFG_SCCR_TSEC2CM SCCR_TSEC2CM_1 /* TSEC2 clock setting > */ > +#define CFG_SCCR_ENCCM SCCR_ENCCM_3 /* ENC clock setting */ > +#define CFG_SCCR_USBCM SCCR_USBCM_3 /* USB clock setting */ > +#define CFG_SCCR_VAL ( CFG_SCCR_INIT \ > + | CFG_SCCR_TSEC1CM \ > + | CFG_SCCR_TSEC2CM \ > + | CFG_SCCR_ENCCM \ > + | CFG_SCCR_USBCM ) > + > /* board pre init: do not call, nothing to do */ > #undef CONFIG_BOARD_EARLY_INIT_F > > -- > 1.3.GIT </snip> Your U-Boot support team

1 0

Re: [U-Boot-Users] [DNX#2006081742000105] [PATCH 6/6 ] Unified variable names and consolidated macro f [...]
by U-Boot patch tracking system 17 Aug '06

17 Aug '06

Dear Mr. U. Boot, thank you for your contribution to the U-Boot project. Your e-mail was registered at our system under the ticket number [DNX#2006081742000105]. Please keep this ticked ID string in the subject line of any e-mail replies!!! Your U-Boot support team Powered by OTRS (http://otrs.org/)

1 0