March 2006 - U-Boot

Re: [DNX#2006040142001052] [U-Boot-Users] [patch] Fix DDR6 errata on TQM834x [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142001052] was created: <snip> > This patch fixes the DDR6 errata (described in the document > MPC8349E Device Errata Rev.8, 2/2006) on the TQM834x boards. > > Signed-off-by: Martin Krause <martin.krause(a)tqs.de> > > CHANGELOG: > > * Fix DDR6 errata on TQM834x boards > Patch by Thomas Waehner, 7 Mar 2006 </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142001043] [U-Boot-Users] [PATCH] Use ${CROSS_COMPILE} iso mi [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142001043] was created: <snip> > CHANGELOG > * Building mips with a different cross-compiler (eg: > mipsel-unknown-linux- from crosstools) then mips-linux- fails. The > solution is to use the environment variable ${CROSS_COMPILE} instead of > fixed cross-compiler "mips-linux-" prefix. > > Patch by Jean-Paul Saman, 21 Dec 2005. > > > > > Kind greetings, > > Jean-Paul Saman > > Philips Semiconductors CTO/RTG > Philips HighTech Campus, building WDA 3.29 > Professor van den Holstlaan 4 > 5655 AA Eindhoven > tel: +31 (0)40 27 45131 </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142001025] [U-Boot-Users] My 3 patches
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142001025] was created: <snip> > Hi. > > Here is my 3 patches. > > sbc2410x.patch is for the new board -- SBC-2410X. I write this new > hardware-specific configurations refer to smdk2410 configurations in > U-Boot. > File list: > MAKEALL > Makefile > board/sbc2410x/Makefile > board/sbc2410x/config.mk > board/sbc2410x/flash.c > board/sbc2410x/lowlevel_init.S > board/sbc2410x/sbc2410x.c > board/sbc2410x/u-boot.lds > cpu/arm920t/s3c24x0/interrupts.c > include/configs/sbc2410x.h > This patch adds a new configuration option -- CONFIG_SBC2410X. > > cmdline_editing.patch implements cmdline-editing extension of readline. > I pick > codes heavily borrowed from vivi bootloader and integrate them into > U-Boot. > File list: > common/main.c > This patch adds a new configuration option -- CONFIG_CMDLINE_EDITING. > > nand_for_sbc2410x.patch adds nand support for SBC-2410X board. It do > that by > taking nand controller specific codes (from VCMA9 board) in place. > File list: > common/cmd_nand.c > include/linux/mtd/nand.h > include/linux/mtd/nand_ids.h > > more detail please review: > http://sourceforge.net/mailarchive/forum.php?thread_id=8089177&forum_id=128… > > CHANGELOG item: > * Add support for friendly-arm SBC-2410X board > Patch by JinHua Luo, 1 Sep 2005 > * Add to readline cmdline-editing extension > Patch by JinHua Luo, 1 Sep 2005 > * Add nand support for SBC-2410X > Patch by JinHua Luo, 1 Sep 2005 > > CREDIT item (if proper): > N: JinHua Luo > E: luo.jinhua(a)gd-linux.com home_king(a)163.com > D: Support for friendly-arm SBC-2410X board > D: Add to readline cmdline-editing extension > D: Add nand support for SBC-2410X > W: www.gd-linux.com > > Best regards, > > luo.jinhua > > -- > JinHua Luo, GuangDong Linux Center, <luo.jinhua(a)gd-linux.com> </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142001016] [U-Boot-Users] Re: [PATCH] Command history and Com [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142001016] was created: <snip> > d'oh! > > I discovered a foolish mistake in my patch release methods. I missed > a last minute update to the included headers section. here is the > new patch... > > * Patch by James MacAulay Sept 27, 2005 > - Add a configuration option CONFIG_COMMAND_HISTORY to implement > command > history. Uses up and down arrow keys to scroll through > history. Other > options are described in README. > - Add a configuration option CONFIG_COMMAND_EDIT to implement > command > buffer editing. Uses ^A, ^E, left and right arrow keys to move > through > command buffer. Other options are described in README. > > On 9/27/05, J Mac <macamirix.com(a)gmail.com> wrote: > > I made this patch using 'diff' on two source trees; I got the original copies > > of the files from the gitweb interface at source.denx.net. I used the > > 'diff -purN OLD NEW' command as described in README to generate the patch. > > > > All code changes are local to common/main.c > > > > Define CONFIG_COMMAND_HISTORY and/or CONFIG_COMMAND_EDIT to enable the > > behaviour(s). > > > > Please let me know if there is something I need to do to make the patch > > acceptable. > > > > * Patch by James MacAulay Sept 27, 2005 > > - Add a configuration option CONFIG_COMMAND_HISTORY to implement command > > history. Uses up and down arrow keys to scroll through history. Other > > options are described in README. > > - Add a configuration option CONFIG_COMMAND_EDIT to implement command > > buffer editing. Uses ^A, ^E, left and right arrow keys to move through > > command buffer. Other options are described in README. > > > > > > </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142001007] [U-Boot-Users] [PATCH] wrsbc8560 support
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142001007] was created: <snip> > > This patch add the Wind River wrsbc8560 support back into u-boot. At > one time it worked until some code conflicting code was removed to > support the Motorolla 85xx evaluation platforms. > > The PHY code for the wrsbc8560 has been added in again. > > > Signed-off-by: Jason Wessel <jason.wessel(a)windriver.com> > > -------------BEGIN PATCH-------------------------- > Separate Motorolla sbc8540 and sbc8560 from wrsbc8560 > > --- > commit fe3c13d77c1d36fddcf751d8c4b183bc2373b9da > tree 9aab5c704d53170090d7152d56daa739d06cbfc3 > parent 77f6580cc078fea22c2b1348f5b177edcd63885f > author <jwessel(a)jwessel3-lx.(none)> Sat, 01 Oct 2005 11:10:05 -0500 > committer <jwessel(a)jwessel3-lx.(none)> Sat, 01 Oct 2005 11:10:05 -0500 > > CHANGELOG | 3 > Makefile | 13 + > doc/README.wrsbc8560 | 57 ++++++ > drivers/tsec.c | 32 +++ > include/configs/wrsbc8560.h | 410 > +++++++++++++++++++++++++++++++++++++++++++ > 5 files changed, 515 insertions(+), 0 deletions(-) > > diff --git a/CHANGELOG b/CHANGELOG > --- a/CHANGELOG > +++ b/CHANGELOG > @@ -2,6 +2,9 @@ > Changes for U-Boot 1.1.4: > ====================================================================== > > +* Fix Wind River wrsb8560 support > + Patch by Jason Wessel, 01 Sep 2005 > + > * Fix problems with ld version 2.16 (dot outside sections problem) > Pointed out by Gerhard Jaeger, 31 Aug 2005; > cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html > diff --git a/Makefile b/Makefile > --- a/Makefile > +++ b/Makefile > @@ -1301,6 +1301,19 @@ sbc8560_66_config: unconfig > fi > @./mkconfig -a sbc8560 ppc mpc85xx sbc8560 > > + > +wrsbc8560_config \ > +wrsbc8560_33_config \ > +wrsbc8560_66_config: unconfig > + @if [ "$(findstring _66_,$@)" ] ; then \ > + echo "#define CONFIG_PCI_66" >>include/config.h ; \ > + echo "... 66 MHz PCI" ; \ > + else \ > + >include/config.h ; \ > + echo "... 33 MHz PCI" ; \ > + fi > + @./mkconfig -a wrsbc8560 ppc mpc85xx sbc8560 > + > stxgp3_config: unconfig > @./mkconfig $(@:_config=) ppc mpc85xx stxgp3 > > diff --git a/doc/README.wrsbc8560 b/doc/README.wrsbc8560 > new file mode 100644 > --- /dev/null > +++ b/doc/README.wrsbc8560 > @@ -0,0 +1,57 @@ > +The port was tested on Wind River System wrsbc8560 board > +<www.windriver.com>. U-Boot was installed on the flash memory of the > +CPU card (not the SODIMM). > + > +NOTE: Please configure uboot compile to the proper PCI frequency and > +setup the appropriate DIP switch settings. > + > +wrsb8560 board: > + > +Make sure boards switches are set to their appropriate conditions. > +Refer to the Engineering Reference Guide ERG-00300-002. Of particular > +importance are: 1) the settings for JP4 (JP4 1-3 and 2-4), which > +select the on-board FLASH device (Intel 28F128Jx); 2) The settings > +for the Clock SW9 (33 MHz or 66 MHz). > + > + Note: SW9 Settings: 66 MHz > + 4:1 ratio CCB clocks:SYSCLK > + 3:1 ration e500 Core:CCB > + pos1 - on, pos2 - on, pos3 - off, pos4 - on, pos5 - off, > pos6 - on > + Note: SW9 Settings: 33 MHz > + 8:1 ratio CCB clocks:SYSCLK > + 3:1 ration e500 Core:CCB > + pos1 - on, pos2 - on, pos3 - on, pos4 - off, pos5 - off, > pos6 - on > + > + > +Flashing the FLASH device with the "Wind River ICE": > + > +1) Properly connect and configure the Wind River ICE to the target > + JTAG port. This includes running the wrsbc8560 register script. Make </snip> Your U-Boot support team

1 0

[U-Boot-Users] Re: [DNX#2006040142000991] [PATCH] U-Boot current CVS: Lite5200 fancy configu [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000991] was created: <snip> > Hello, > > CHANGELOG: > > * Lite5200 / IceCube configuration: > - enable some of latest U-Boot features: HU Shell, NetConsole, > MTD partition handling, EXT2 fs support, loopw, redundant > environment > - prepare a default MTD partition structure > - extend MONITOR_LEN from 192kB to 384kB, accordingly move > the two environment sectors > > > NOTE: > > The patch comes in two different types (the two patches below). > The so named "extended_way" patch simply extends the configuration in > include/configs/IceCube.h -- the so named "fancy_way" patch enclose all > the > board configuration in the special configuration define > CONFIG_ICECUBE_FANCY. > Only the two configuration targets "Lite5200_fancy_config" and > "icecube_5200_fancy_config" will build code with the new and fancy > configuration options. So the old default configuration will be > retained. > > The new MTD partition handling for Lite5200 / IceCube assume a Linux > Kernel > patch to work together with a two flash bank infrastructure. The related > > patch is pending. > > > > Best regards, > Stephan Linz > > > -------------------------------------------------------- > while (!asleep()) ++sheep; </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000982] [U-Boot-Users] patch: Nios-II boards EP1C20, EP1S1 [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000982] was created: <snip> > Part 2: Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40 > Regards, > --Scott </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000973] Réf. : Re: [U-Boot-Users] get_ram_size bug and ask [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000973] was created: <snip> > Hi Wolfgang, > > it seems the code I have was modified. > I look in the original cvs version and it seems that the base address > isn't restored either. > > > [...] > addr = base; > save[i] = *addr; <-- save value at base address > *addr = 0; <--- modify it. > > if ((val = *addr) != 0) { > <--- error case : restore all values > [...] > } > > <-- we forget to restore the value and start to restore value > @base+1 with save[i-1]. > > for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) { > addr = base + cnt; /* pointer arith! */ > val = *addr; > *addr = save[--i]; > if (val != ~cnt) { > size = cnt * sizeof (long); > /* Restore the original data before leaving the > function. > */ > for (cnt <<= 1; cnt < maxsize / sizeof (long); > cnt > <<= 1) { > addr = base + cnt; > *addr = save[--i]; > } > return (size); > } > } > > > regards, > > Matthieu </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000964] [U-Boot-Users] WARNING: in ext2fs.c
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000964] was created: <snip> > > > In function: ext2fs_read_file(ext2fs_node_t node, int pos, unsigned > int len, char *buf) > > You may not be getting all the bytes you requested in the 'len' > parameter. Your requested length might be improperly adjusted. > ----------------------- Code snippet ------------- > unsigned int filesize = node->inode.size; > > /* Adjust len so it we can't read past the end of the file. */ > if (len > filesize) { > len = filesize; > } > ----------------------------------------------------------- > > "len" is the native requested size, while "filesize" is the files real > size, > but byte-swapped and the two are being compared. As long as the > byte-swapped > length value is larger than the requested size value, then you'll never > have > a problem. > > Now assume the file is 2meg and you requested 2meg. > > IF( len=200000 (2meg) > filesize=2000(2meg byte-swapped) ) > THEN len = filesize > > You end up getting only 2000 bytes. > > The initialization of filesize should be: > unsigned int filesize = __le32_to_cpu (node->inode.size); > Not: > unsigned int filesize = node->inode.size; > > (440gx) > -John Roberts > > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: > Power Architecture Resource Center: Free content, downloads, > discussions, > and more. http://solutions.newsforge.com/ibmarch.tmpl > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000955] [U-Boot-Users] Add support for r5200 board
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000955] was created: <snip> > > This patch can also be pulled from > http://labxtechnologies.com/u-boot.git. This is a proprietary board. > > CHANGELOG > * Add support for r5200 board > Patch by Zachary Landau, 26 Jan 2006 > > Signed-off-by: Zachary P. Landau <zachary.landau(a)labxtechnologies.com> > > > --- > > CHANGELOG | 3 + > MAINTAINERS | 4 + > Makefile | 3 + > board/r5200/Makefile | 40 ++++++++++ > board/r5200/config.mk | 25 ++++++ > board/r5200/r5200.c | 125 +++++++++++++++++++++++++++++++ > board/r5200/u-boot.lds | 144 > +++++++++++++++++++++++++++++++++++ > examples/Makefile | 2 > include/asm-m68k/immap_5271.h | 98 ++++++++++++++++++++++++ > include/asm-m68k/m5271.h | 93 +++++++++++++++++++++++ > include/configs/r5200.h | 168 > +++++++++++++++++++++++++++++++++++++++++ > 11 files changed, 704 insertions(+), 1 deletions(-) > create mode 100644 board/r5200/Makefile > create mode 100644 board/r5200/config.mk > create mode 100644 board/r5200/r5200.c > create mode 100644 board/r5200/u-boot.lds > create mode 100644 include/asm-m68k/immap_5271.h > create mode 100644 include/asm-m68k/m5271.h > create mode 100644 include/configs/r5200.h > > 3a108ed8682e8dab8bf301e91db1999d4cf88c55 > diff --git a/CHANGELOG b/CHANGELOG > index 607cde1..fb6278a 100644 > --- a/CHANGELOG > +++ b/CHANGELOG > @@ -2,6 +2,9 @@ > Changes since U-Boot 1.1.4: > ====================================================================== > > +* Add support for r5200 board > + Patch by Zachary Landau, 26 Jan 2006 > + > * Add support for Freescale M5271 processor > Patch by Zachary Landau, 26 Jan 2006 > > diff --git a/MAINTAINERS b/MAINTAINERS > index 0ef9e03..9380220 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -534,6 +534,10 @@ Matthias Fuchs <matthias.fuchs@esd-elect > > TASREG MCF5249 > > +Zachary P. Landau <zachary.landau(a)labxtechnologies.com> > + > + r5200 mcf52x2 > + > ######################################################################### > # End of MAINTAINERS list # > ######################################################################### > diff --git a/Makefile b/Makefile > index 9305cab..2ac35a6 100644 > --- a/Makefile > +++ b/Makefile > @@ -1243,6 +1243,9 @@ M5282EVB_config : unconfig > TASREG_config : unconfig > @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd > > +r5200_config : unconfig > + @./mkconfig $(@:_config=) m68k mcf52x2 r5200 > + > ######################################################################### > ## MPC83xx Systems > ######################################################################### > diff --git a/board/r5200/Makefile b/board/r5200/Makefile > new file mode 100644 > index 0000000..d0364ed > --- /dev/null > +++ b/board/r5200/Makefile > @@ -0,0 +1,40 @@ > +# > +# (C) Copyright 2000-2003 > +# Wolfgang Denk, DENX Software Engineering, wd(a)denx.de. > +# > +# See file CREDITS for list of people who contributed to this > +# project. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation; either version 2 of > +# the License, or (at your option) any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the </snip> Your U-Boot support team

1 0