March 2006 - U-Boot

Re: [DNX#2006040142000946] [U-Boot-Users] [PATCH] 09-fix-trab-channel-switchi [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000946] was created: <snip> > Fix TRAB channel switching delay for trab_fkt.bin standalone applikation > Patch by Martin Krause, 08 Nov 2005 > > In tsc2000_read_channel() the delay after setting the multiplexer > to a temperature channel is increased from 1,5 ms to 10 ms. This > is to allow the multiplexer inputs to stabilize after huge steps > of the input signal level. > > Signed-off-by: Martin Krause <martin.krause(a)tqs.de> > > CHANGELOG: > > Fix TRAB channel switching delay for trab_fkt.bin standalone applikation > Patch by Martin Krause, 08 Nov 2005 </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000937] [U-Boot-Users] Git broken?
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000937] was created: <snip> > > On Wed, Mar 22, 2006 at 10:08:10PM +0100, Wolfgang Denk wrote: > > In message <20060322204537.GB10703(a)bork.org> you wrote: > > > > > > which contains 0603fd6c2bbaef61ea3e8efb67a440b63e0c6b60 > > > Getting pack 2a2ae5b5d29e02e7330c674195b3423487f83452 > > > which contains 54775d31dfef42fe0295640054976f691c1e48b3 > > > error: File 012b453bb78fbd94595953e04e298db8203e2e09 (http://www.denx.de/git/u-boot.git/objects/01/2b453bb78fbd94595953e04e298db8…) corrupt > > > > This looks fishy to me. Do you have any problems with your network > > link? Some caching proxy server with (probably stale) caches or so? > > Gar. You're right. Stupid proxy. > > > > > Please try again. Drop me a note (at wd(a)denx.de) if it's still not > > working. > > > > Works from my elsewhere machine. Any chance of getting git:// on > denx.de > so that http proxies don't interfere? > mh > > -- > Martin Hicks || mort(a)bork.org || PGP/GnuPG: 0x4C7F2BEE </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000928] [U-Boot-Users] [PATCH-2/8]Blackfin support - the m [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000928] was created: <snip> > The patch is based on following point in the current U-boot git > repository. > ============================================================ > commit 6624b687bc2b747233090e67628df37d1c84ed17 > Author: Wolfgang Denk <wd(a)pollux.(none)> > Date: Wed Feb 22 10:25:39 2006 +0100 > > Rename SMMACO4 board into smmaco4 for consistency with Linux. > ============================================================ > > Changelog entry: > * Added support for Blackfin platform > Patch by Aubrey.Li <aubreylee(a)gmail.com> > > Thanks, > -Aubrey </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000919] [U-Boot-Users] Patch: Sandburst Karef Board Suppo [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000919] was created: <snip> > This patch brings the sandburst karef board support up to date due to > fpga changes. > > CHANGELOG: > > * Update Sandburst Karef board support due to FPGA fixes. > Initialize front end fpga ID and Version variables properly. > Patch by Travis B. Sawyer, 16 Feb 2006 > > > Regards, > Travis Sawyer </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000893] [U-Boot-Users] [PATCH] Support for new board, gth2 [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000893] was created: <snip> > * Patch by Thomas Lange Aug 11 2005 > - Add support for gth2 board > > Changes to common files: > * common/cmd_ide.c > Swap input data if GTH2 and Big endian > > * cpu/mips/au1x00_serial.c > Call GTH2 log functions. > Make sure watchdog is kicked > > * cpu/mips/cpu.c > If gth2, hang during reset until hardware watchdog kicks in > > * include/asm-mips/au1x00.h > Add GPIO definitions > > /Thomas </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000884] [U-Boot-Users] tsec generic PHY
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000884] was created: <snip> > Hi. > > If the PHY on TSEC device is not one of the enumerated; it would be nice > > to fall back to a generic, wouldn't it? > > Unless there are moves a-foot to pull all the PHY stuff out to a generic > > layer somewhere else. > > -dbu. </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000901] [U-Boot-Users] [PATCH] I2C bus speed on the MPC85x [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000901] was created: <snip> > The attached patch will fix the settings of I2C clock on the MPC85xx > CPUs according to the speed parameter in the i2c_init() > > -- > S pøátelským pozdravem / Best regards / Mit freundlichen Grüßen > > Ing. Pavel Bartù¹ek > SYSGO s.r.o. > Høbitovní 359/10 > CZ-14800 Praha 4 > Phone/Fax: +420 244911174 > GSM: +420 777 760728 > pavel.bartusek(a)sysgo.com > > http://www.sysgo.com | http://www.elinos.com | http://www.pikeos.com </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000875] [U-Boot-Users] [PATCH] Two System ACE CF fixes
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000875] was created: <snip> > Attached a patch that adds support for the 16-bit wide bus of System ACE > > CF besides the existing support for the 8-bit wide bus. > > The patch also sets the FORCECFGMODE bit in the control register when > the System ACE CF configuration controller is reset before reading a > sector. Without this bit set System ACE CF reconfigures an FPGA if the > CFGMODE pin is active whenever a sector is read. > > The third hunk fixes a typo. > > - Peter </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000866] [U-Boot-Users] byteorder of image_header_t members [...]
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000866] was created: <snip> > Hi, > > I wrote: > > > Maybe you want to consider the attached patch. > > > > * Patch by Steven Scholz, 10 Jun 2005: > > Adding loads of ntohl() in image header handling (for the sake > > of readability) > > Still in the patch queue? Or rejected/discarded? > > -- > Steven > > > ------------------------------------------------------- > This SF.Net email is sponsored by the JBoss Inc. Get Certified Today > Register for a JBoss Training Course. Free Certification Exam > for All Training Attendees Through End of 2005. For more info visit: > http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users </snip> Your U-Boot support team

1 0

Re: [DNX#2006040142000857] [U-Boot-Users] test variable existence in hush
by DENX Support System 01 Apr '06

01 Apr '06

Hello list, inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000857] was created: <snip> > On Mon, 22 Aug 2005 14:21:58 +0200 Wolfgang Denk wrote: > > >I cannot confirm this. The only part of hush which is involved here > >is the && processing which works fine for me.. > > > >"test" is NOT a hush builtin. > > I hit the send button too early... > > Yes, "test" is not a hush builtin, but it is only available if the hush > parser is enabled. > > >Sure: > > > >TRAB # foo= > >TRAB # test -n "$foo" && echo yes > >TRAB # test -n "$foo" || echo no > >no > >TRAB # test "$foo" && echo yes > >TRAB # test "$foo" || echo no > >no > >TRAB # foo=dummy > >TRAB # test -n "$foo" && echo yes > >yes > >TRAB # test -n "$foo" || echo no > >TRAB # test "$foo" && echo yes > >TRAB # test "$foo" || echo no > >no > > > >THe only problem I see is with "test -z": > > > > TRAB # foo= > > TRAB # test -z "$foo" && echo yes > > TRAB # test -z "$foo" || echo no > > no > >but > > TRAB # test -z "" && echo yes > > yes > > TRAB # test -z "" || echo no > > TRAB # > > No, I think this is misleading. A quick debugging session showed that > the problem is not the "test" command itself. With 'test -z ""' and > 'test -n ""', the command will correctly see three arguments. However, > with 'test -n "$foo"' and 'test -z "$foo"' (and empty $foo), the command > will only get two arguments which always results in a return value of 1. > That's why 'test -n' seems to work. > > Regards, > Andreas Engel > > > ------------------------------------------------------- > SF.Net email is Sponsored by the Better Software Conference & EXPO > September 19-22, 2005 * San Francisco, CA * Development Lifecycle > Practices > Agile & Plan-Driven Development * Managing Projects & Teams * Testing & > QA > Security * Process Improvement & Measurement * > http://www.sqe.com/bsce5sf > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users </snip> Your U-Boot support team

1 0