September 2005 - U-Boot

[U-Boot-Users] Error :Internal relocation (type 232 ) not fixed up (IMMEDIATE)
by Swapnil Ashok Narkhede 12 Sep '05

12 Sep '05

I am trying to compile U-boot for Mainstone board. But while compiling i receive an error message "Internal relocation (type 232 ) not fixed up (IMMEDIATE)". with in pxavoltage.S. I tried to look into this error and from whatever information i could get, i can interpret that this error is because of nature of comparison of case-sensittive symbols by GNU assembler. I could find 3 cmp instructions in this file that actually does comparison for the sake of generating a delay. But i cannot figure out what should be the proper values or rather how to resolve this error. Please help me understand and resolve this error. Regards, Swapnil Narkhede Mob:- 0432025023 Email:- s3092131(a)student.rmit.edu.au School of Computer Science and Information Technology RMIT University, Melbourne

2 1

[U-Boot-Users] subscribe
by Perkalskite, Alexander 12 Sep '05

12 Sep '05

subscribe *********************************************************************************** Information contained in this email message is intended only for use of the individual or entity named above. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify the postmaster(a)nds.com and destroy the original message. ***********************************************************************************

1 0

FW: [U-Boot-Users] U boot modification...
by Kiran Jammula 12 Sep '05

12 Sep '05

In my system I want to disable the console .... How to do it. >From: "Kiran Jammula" <kiranjammula(a)hotmail.com> >To: u-boot-users(a)lists.sourceforge.net >Subject: [U-Boot-Users] U boot modification... >Date: Mon, 12 Sep 2005 12:14:38 +0530 > >Hi, > >I am using U boot for my project. >I need to configure the console while booting by prompting the user from >target board LCD and Keypad. So please let me know which file of the U-boot >I have to modify to achieve this. > >Kiran > >_________________________________________________________________ >Special offer for NRIs! >http://creative.mediaturf.net/creatives/citibankrca/rca_msntagofline.htm >Get a zero balance account for next 20 years. From Citibank > > > >------------------------------------------------------- >SF.Net email is Sponsored by the Better Software Conference & EXPO >September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices >Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA >Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf >_______________________________________________ >U-Boot-Users mailing list >U-Boot-Users(a)lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/u-boot-users _________________________________________________________________ Stand a chance to Win Half Kg Gold & Lots more! http://adfarm.mediaplex.com/ad/ck/4686-26272-10936-631?ck=GoldRush Shop on eBay Now!

3 2

[U-Boot-Users] RE: unable to boot kernel using u-boot on MPC8272ADS
by Landau, Bracha 12 Sep '05

12 Sep '05

I am trying to boot kernel 2.6.10 (taken from kernel.org) on an MPC8272ADS board. It hangs on a bootm command after decompressing the kernel. I'm using u-boot 1.1.3. I've checked the BCSR value and the structure of bd_info and the kernel and u-boot values match. What else could be the problem? -----Original Message----- From: u-boot-users-admin(a)lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net]On Behalf Of u-boot-users-request(a)lists.sourceforge.net Sent: Friday, September 09, 2005 11:02 AM To: u-boot-users(a)lists.sourceforge.net Subject: U-Boot-Users digest, Vol 1 #1531 - 13 msgs Send U-Boot-Users mailing list submissions to u-boot-users(a)lists.sourceforge.net To subscribe or unsubscribe via the World Wide Web, visit https://lists.sourceforge.net/lists/listinfo/u-boot-users or, via email, send a message with subject or body 'help' to u-boot-users-request(a)lists.sourceforge.net You can reach the person managing the list at u-boot-users-admin(a)lists.sourceforge.net When replying, please edit your Subject line so it is more specific than "Re: Contents of U-Boot-Users digest..." Today's Topics: 1. Re: Ram disk image for ARM and CRC error in flash (Wolfgang Denk) 2. RE: Re: booting u-boot from internal flash on M5282EVB (David Peters) 3. Re: stage-2 loader hangs (manju mahajan) 4. Re: stage-2 loader hangs (Harshapvstus) 5. Re: stage-2 loader hangs (Wolfgang Denk) 6. Re: stage-2 loader hangs (Harshapvstus) 7. Re: booting u-boot from internal flash on M5282EVB (Jens Scharsig) 8. Re: mtdparts (Andreas Engel) 9. RE: Re: booting u-boot from internal flash on M5282EVB (David Peters) 10. Where to start mtest from? (Martin Egholm Nielsen) 11. RE: stage-2 loader hangs (Nghiem, Tien) 12. Re: stage-2 loader hangs (manju mahajan) 13. Re: Where to start mtest from? (Martin Egholm Nielsen) --__--__-- Message: 1 To: "Swapnil Ashok Narkhede" <S3092131(a)student.rmit.edu.au> Cc: u-boot-users(a)lists.sourceforge.net From: Wolfgang Denk <wd(a)denx.de> Subject: Re: [U-Boot-Users] Ram disk image for ARM and CRC error in flash Date: Wed, 07 Sep 2005 16:46:44 +0200 In message <1126101707.8716977cS3092131(a)student.rmit.edu.au> you wrote: > > SWAP$ erase 0x40000 0x1fffff > ....... done > Erased 7 sectors > > SWAP$ cp.b 0xa0800000 0x40000 0xbc781 > Copy to Flash... done > > SWAP$ iminfo 0x40000 > ## Checking Image at 00040000 ... > Image Name: Linux Kernel Image > Image Type: ARM Linux Kernel Image (gzip compressed) > Data Size: 771905 Bytes =3D 753.8 kB > Load Address: a0800000 > Entry Point: a0800000 > Verifying Checksum ... Bad Data CRC > o/p<<< > > Why do i get this error. Are you sure your hardware is working fine? No RAM problems otherwise? > 2> > Using the uImage in RAM, when > i try to execute it using bootm from > the RAM. i get the following output > > o/p>>> > SWAP$ bootm 0xa0800000 ^^^^^^^^^^^^^^^^^^^^^^^^ > ## Booting image at a0800000 ... > Image Name: Linux Kernel Image > Image Type: ARM Linux Kernel Image (gzip compressed) > Data Size: 771905 Bytes = 753.8 kB > Load Address: a0800000 ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Dowanload address and load address must differt at by least the size of the uncompressed kernel size. > After reading the manual, REadme and a few posts > i came to know that the bootargs were set to NFSboot. Thisi s not a bootargs issue. > 3> > I would be able to prepare uRamdisk using mkimage, > but that requires an image data file > SIMPLE-ramdisk.image.gz to be specified with the > -d switch. > How do i make the SIMPLE-ramdisk.image.gz so that Read the manual. > OR from where do i find SIMPLE-ramdisk.image. for > ARM processor For example from our ELDK: /opt/eldk/arm/images/ Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de No one may kill a man. Not for any purpose. It cannot be condoned. -- Kirk, "Spock's Brain", stardate 5431.6 --__--__-- Message: 2 Reply-To: <davidp(a)matrixpd.com> From: "David Peters" <davidp(a)matrixpd.com> To: <u-boot-users(a)lists.sourceforge.net> Subject: RE: [U-Boot-Users] Re: booting u-boot from internal flash on M5282EVB Date: Wed, 7 Sep 2005 12:08:30 -0500 Organization: Matrix Product Development, Inc. > the original EVB implementation doen't support this. But you can use my > patches > > MCF5282 without reloader > news://news.gmane.org:119/42F75DFA.80002@bus-elektronik.de > > and > > New Board (EB+MCF-EV123 based on Frescale MCF5282) > news://news.gmane.org:119/42F75E25.2040301@bus-elektronik.de > > to implement this. > > The EB+MCF-EV123 Board can boot from internale and externel FLASH. > For details please read the code. > > regards Jens > David Peters schrieb: > > I'm struggling trying to get U-Boot to boot from the internal flash of > the > > M5282EVB. Can anyone get me going in the right direction? I'm still not having any luck. I downloaded the patch and installed it and everything looks right. I'm trying to start the evb as if there wasn't any external ram or flash. We have a project coming up that needs to run the 5282 in single-chip mode. I suspect that I'm not defining the base addresses correctly or TEXT_BASE. Can anyone help any further? Thank you! --__--__-- Message: 3 Date: Wed, 7 Sep 2005 12:01:26 -0700 (PDT) From: manju mahajan <manjumail(a)yahoo.com> Subject: Re: [U-Boot-Users] stage-2 loader hangs To: u-boot-users(a)lists.sourceforge.net I don't know how to use ppcboot_stage2 loader. As I could not get it compiled in my environment. Not sure if I should use it or not. I have netbsd Image with me for WALNUT board I used : mkimage -A ppc -O netbsd -T kernel -C gzip -a 0 -e 0 -n "MyNetbsd" -d netbsd-WALNUT.gz >loadb 400000 > bootm 400000 ## Booting image at 00400000 ... Image Name: Netbsd Manju Created: 2005-09-06 21:17:01 UTC Image Type: PowerPC NetBSD Kernel Image (gzip compressed) Data Size: 2006672 Bytes = 1.9 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Transferring control to NetBSD stage-2 loader (at address 00000000) ... it hangs here. ______________________________________________________ Click here to donate to the Hurricane Katrina relief effort. http://store.yahoo.com/redcross-donate3/ --__--__-- Message: 4 From: "Harshapvstus" <harsha(a)pvst.us> To: "manju mahajan" <manjumail(a)yahoo.com>, <u-boot-users(a)lists.sourceforge.net> Subject: Re: [U-Boot-Users] stage-2 loader hangs Date: Thu, 8 Sep 2005 14:11:35 +0900 Hi, I have burned the FLASH for U-boot, I would like to debug the u-boot code. how can i do. Thanks ----- Original Message ----- From: "manju mahajan" <manjumail(a)yahoo.com> To: <u-boot-users(a)lists.sourceforge.net> Sent: Thursday, September 08, 2005 4:01 AM Subject: Re: [U-Boot-Users] stage-2 loader hangs > I don't know how to use ppcboot_stage2 loader. As I > could not get it compiled in my environment. Not sure > if I should use it or not. > > > I have netbsd Image with me for WALNUT board > > I used : > > mkimage -A ppc -O netbsd -T kernel -C gzip -a 0 -e 0 > -n "MyNetbsd" -d netbsd-WALNUT.gz > > > > >loadb 400000 > > > bootm 400000 > ## Booting image at 00400000 ... > Image Name: Netbsd Manju > Created: 2005-09-06 21:17:01 UTC > Image Type: PowerPC NetBSD Kernel Image (gzip > compressed) > Data Size: 2006672 Bytes = 1.9 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK > ## Transferring control to NetBSD stage-2 loader (at > address 00000000) ... > > it hangs here. > > > > > > > ______________________________________________________ > Click here to donate to the Hurricane Katrina relief effort. > http://store.yahoo.com/redcross-donate3/ > > > ------------------------------------------------------- > SF.Net email is Sponsored by the Better Software Conference & EXPO > September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices > Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA > Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.344 / Virus Database: 267.10.19/92 - Release Date: 9/7/2005 > > --__--__-- Message: 5 To: "Harshapvstus" <harsha(a)pvst.us> Cc: "manju mahajan" <manjumail(a)yahoo.com>, u-boot-users(a)lists.sourceforge.net From: Wolfgang Denk <wd(a)denx.de> Subject: Re: [U-Boot-Users] stage-2 loader hangs Date: Thu, 08 Sep 2005 07:32:10 +0200 In message <011401c5b433$ca758b80$0510a8c0@pvst6novr74bnd> you wrote: > > I have burned the FLASH for U-boot, > I would like to debug the u-boot code. > how can i do. Read the manual at http://www.denx.de/twiki/bin/view/DULG/DebuggingUBoot Then attach your BDI2000 and start your GDB session. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de People are very flexible and learn to adjust to strange surroundings -- they can become accustomed to read Lisp and Fortran programs, for example. - Leon Sterling and Ehud Shapiro, Art of Prolog, MIT Press --__--__-- Message: 6 From: "Harshapvstus" <harsha(a)pvst.us> To: "Wolfgang Denk" <wd(a)denx.de> Cc: "manju mahajan" <manjumail(a)yahoo.com>, <u-boot-users(a)lists.sourceforge.net> Subject: Re: [U-Boot-Users] stage-2 loader hangs Date: Thu, 8 Sep 2005 14:41:46 +0900 i have JTAG not BDI2000 is it possible ? ----- Original Message ----- From: "Wolfgang Denk" <wd(a)denx.de> To: "Harshapvstus" <harsha(a)pvst.us> Cc: "manju mahajan" <manjumail(a)yahoo.com>; <u-boot-users(a)lists.sourceforge.net> Sent: Thursday, September 08, 2005 2:32 PM Subject: Re: [U-Boot-Users] stage-2 loader hangs > In message <011401c5b433$ca758b80$0510a8c0@pvst6novr74bnd> you wrote: > > > > I have burned the FLASH for U-boot, > > I would like to debug the u-boot code. > > how can i do. > > Read the manual at http://www.denx.de/twiki/bin/view/DULG/DebuggingUBoot > > Then attach your BDI2000 and start your GDB session. > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > People are very flexible and learn to adjust to strange surroundings > -- they can become accustomed to read Lisp and Fortran programs, for > example. - Leon Sterling and Ehud Shapiro, Art of Prolog, MIT Press > > > ------------------------------------------------------- > SF.Net email is Sponsored by the Better Software Conference & EXPO > September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices > Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA > Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.344 / Virus Database: 267.10.19/92 - Release Date: 9/7/2005 > > --__--__-- Message: 7 To: u-boot-users(a)lists.sourceforge.net From: Jens Scharsig <esw(a)bus-elektronik.de> Date: Thu, 08 Sep 2005 08:00:31 +0200 Subject: [U-Boot-Users] Re: booting u-boot from internal flash on M5282EVB Hello > I'm trying to start the evb as if there wasn't any external ram or flash. > We have a project coming up that needs to run the 5282 in single-chip mode. U-boot needs more RAM than 64K. Why? U-Boot copies itself to RAM and starts this ram copy. Regards Jens --__--__-- Message: 8 Date: Thu, 8 Sep 2005 12:49:23 +0200 From: Andreas Engel <Andreas.Engel(a)marconi.com> To: u-boot-users(a)lists.sourceforge.net Subject: Re: [U-Boot-Users] mtdparts Organization: Marconi Communications GmbH On Wed, 7 Sep 2005 14:54:59 +0200 Wolfgang Denk wrote: >We willprovide an extension soon; we're going to create an additional >variable 'mtddevnum'. > >Note: the numbering will be exactly as partitions are listed in the >$mtdparts variable. This way user can fully control the indexing >sequence but it is also a bit more troublesome you have to take care >about the order of devices in $mtdparts. > >But the greater flexibilty seems to me to be a big advantage over any >fixed scheme which cannot know about the init sequence in the Linux >kernel. > >Is this OK with you? That's ok with me, too. We won't change our current implementation anyway. Regards, Andreas Engel --__--__-- Message: 9 Reply-To: <davidp(a)matrixpd.com> From: "David Peters" <davidp(a)matrixpd.com> To: <u-boot-users(a)lists.sourceforge.net> Subject: RE: [U-Boot-Users] Re: booting u-boot from internal flash on M5282EVB Date: Thu, 8 Sep 2005 06:54:45 -0500 Organization: Matrix Product Development, Inc. > Hello > > I'm trying to start the evb as if there wasn't any external ram or > flash. > > We have a project coming up that needs to run the 5282 in single-chip > mode. > > U-boot needs more RAM than 64K. Why? U-Boot copies itself to RAM and > starts this ram copy. > > Regards Jens > That's what I was afraid of. I was able to get u-boot to start coming up. The only way I made it happen was by changing: Move.l #(CFG_INT_FLASH_BASE + 0x21), %d0 To Move.l (#CFG_INT_FLASH_BASE + 0x161), %d0 I downloaded CodeWarrior and looked at the code that was generated and that is what they used. I haven't looked into it at all. --__--__-- Message: 10 To: u-boot-users(a)lists.sourceforge.net From: Martin Egholm Nielsen <martin(a)egholm-nielsen.dk> Date: Thu, 08 Sep 2005 16:08:32 +0200 Subject: [U-Boot-Users] Where to start mtest from? Hi there, Is there a way to know what memory segment U-boot uses (stack, etc) so I can give the smallest (safe) possible start address for running "mtest" on my memory? // Martin --__--__-- Message: 11 Subject: RE: [U-Boot-Users] stage-2 loader hangs Date: Thu, 8 Sep 2005 10:22:41 -0400 From: "Nghiem, Tien" <TNghiem(a)oerlikon.ca> To: "Harshapvstus" <harsha(a)pvst.us>, "Wolfgang Denk" <wd(a)denx.de> Cc: "manju mahajan" <manjumail(a)yahoo.com>, <u-boot-users(a)lists.sourceforge.net> It's possible. You have to read your JTAG's documentation. -----Original Message----- From: u-boot-users-admin(a)lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net]On Behalf Of Harshapvstus Sent: Thursday, September 08, 2005 1:42 AM To: Wolfgang Denk Cc: manju mahajan; u-boot-users(a)lists.sourceforge.net Subject: Re: [U-Boot-Users] stage-2 loader hangs=20 i have JTAG not BDI2000 is it possible ? ----- Original Message -----=20 From: "Wolfgang Denk" <wd(a)denx.de> To: "Harshapvstus" <harsha(a)pvst.us> Cc: "manju mahajan" <manjumail(a)yahoo.com>; <u-boot-users(a)lists.sourceforge.net> Sent: Thursday, September 08, 2005 2:32 PM Subject: Re: [U-Boot-Users] stage-2 loader hangs > In message <011401c5b433$ca758b80$0510a8c0@pvst6novr74bnd> you wrote: > > > > I have burned the FLASH for U-boot, > > I would like to debug the u-boot code. > > how can i do. > > Read the manual at = http://www.denx.de/twiki/bin/view/DULG/DebuggingUBoot > > Then attach your BDI2000 and start your GDB session. > > Best regards, > > Wolfgang Denk > > --=20 > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > People are very flexible and learn to adjust to strange surroundings > -- they can become accustomed to read Lisp and Fortran programs, for > example. - Leon Sterling and Ehud Shapiro, Art of Prolog, MIT Press > > > ------------------------------------------------------- > SF.Net email is Sponsored by the Better Software Conference & EXPO > September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices > Agile & Plan-Driven Development * Managing Projects & Teams * Testing = & QA > Security * Process Improvement & Measurement * = http://www.sqe.com/bsce5sf > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > --=20 > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.344 / Virus Database: 267.10.19/92 - Release Date: = 9/7/2005 > > ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle = Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & = QA Security * Process Improvement & Measurement * = http://www.sqe.com/bsce5sf _______________________________________________ U-Boot-Users mailing list U-Boot-Users(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users --__--__-- Message: 12 Date: Thu, 8 Sep 2005 08:47:23 -0700 (PDT) From: manju mahajan <manjumail(a)yahoo.com> Subject: Re: [U-Boot-Users] stage-2 loader hangs To: u-boot-users(a)lists.sourceforge.net Please don't contents in the subject... was hoping I got some replies..... --- Harshapvstus <harsha(a)pvst.us> wrote: > Hi, > > I have burned the FLASH for U-boot, > I would like to debug the u-boot code. > how can i do. > > Thanks > ----- Original Message ----- > From: "manju mahajan" <manjumail(a)yahoo.com> > To: <u-boot-users(a)lists.sourceforge.net> > Sent: Thursday, September 08, 2005 4:01 AM > Subject: Re: [U-Boot-Users] stage-2 loader hangs > > > > I don't know how to use ppcboot_stage2 loader. As > I > > could not get it compiled in my environment. Not > sure > > if I should use it or not. > > > > > > I have netbsd Image with me for WALNUT board > > > > I used : > > > > mkimage -A ppc -O netbsd -T kernel -C gzip -a 0 -e > 0 > > -n "MyNetbsd" -d netbsd-WALNUT.gz > > > > > > > > >loadb 400000 > > > > > bootm 400000 > > ## Booting image at 00400000 ... > > Image Name: Netbsd Manju > > Created: 2005-09-06 21:17:01 UTC > > Image Type: PowerPC NetBSD Kernel Image (gzip > > compressed) > > Data Size: 2006672 Bytes = 1.9 MB > > Load Address: 00000000 > > Entry Point: 00000000 > > Verifying Checksum ... OK > > Uncompressing Kernel Image ... OK > > ## Transferring control to NetBSD stage-2 loader > (at > > address 00000000) ... > > > > it hangs here. > > > > > > > > > > > > > > > ______________________________________________________ > > Click here to donate to the Hurricane Katrina > relief effort. > > http://store.yahoo.com/redcross-donate3/ > > > > > > > ------------------------------------------------------- > > SF.Net email is Sponsored by the Better Software > Conference & EXPO > > September 19-22, 2005 * San Francisco, CA * > Development Lifecycle > Practices > > Agile & Plan-Driven Development * Managing > Projects & Teams * Testing & QA > > Security * Process Improvement & Measurement * > http://www.sqe.com/bsce5sf > > _______________________________________________ > > U-Boot-Users mailing list > > U-Boot-Users(a)lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Anti-Virus. > > Version: 7.0.344 / Virus Database: 267.10.19/92 - > Release Date: 9/7/2005 > > > > > > > > ------------------------------------------------------- > SF.Net email is Sponsored by the Better Software > Conference & EXPO > September 19-22, 2005 * San Francisco, CA * > Development Lifecycle Practices > Agile & Plan-Driven Development * Managing Projects > & Teams * Testing & QA > Security * Process Improvement & Measurement * > http://www.sqe.com/bsce5sf > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users > ______________________________________________________ Click here to donate to the Hurricane Katrina relief effort. http://store.yahoo.com/redcross-donate3/ --__--__-- Message: 13 Date: Fri, 09 Sep 2005 10:01:32 +0200 From: Martin Egholm Nielsen <martin(a)egholm-nielsen.dk> To: u-boot-users(a)lists.sourceforge.net Subject: Re: [U-Boot-Users] Where to start mtest from? Hi Andrew, >>Is there a way to know what memory segment U-boot uses (stack, etc) so I >>can give the smallest (safe) possible start address for running "mtest" >>on my memory? > you didn't say what your target is, but for mips you can turn on debug > output in lib_mips/board.c and it will print out info about where various > things are in memory. Maybe your target is similar. Oh, sorry - it's PPC. And yes, scanning my board.c I see some debug messages regarding adresses... But as I see them, it's start adresses, hence I need to know the size of, say, u-boot it self and the stack... Or what?! BR, Martin --__--__-- _______________________________________________ U-Boot-Users mailing list U-Boot-Users(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users End of U-Boot-Users Digest *********************************************************************************** Information contained in this email message is intended only for use of the individual or entity named above. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify the postmaster(a)nds.com and destroy the original message. ***********************************************************************************

2 1

[U-Boot-Users] usb storage support?
by YenJung Chang 12 Sep '05

12 Sep '05

Hi, all, Does u-boot support OHCI? README mentions that u-boot only support UHCI, however, there are some c files named "usb_ohci" in cpu directory. Does it mean u-boot also supports OHCI? Does u-boot support write action on usb storage? I have surfed usb codes, but I only found some functions for reading from usb storage, no any functions for writing found. Is it true or just my misunderstanding? Could someone kindly give me answer or tell me how or where can I get the answer? Thanks in advance. -- YJ.

3 2

[U-Boot-Users] compiling u-boot for ppc on i386
by manju mahajan 12 Sep '05

12 Sep '05

I have host os: netbsd, host arch=i386, target platform is powerpc405, and targtos =netbsd. I am trying to compile the using : make walnut_config. But it is failing with line 35:Need an operator, line 43:need an operator line 45:need an operator line 47:need an operator what I am missing ?> --------------------------------- Start your day with Yahoo! - make it your home page

3 12

[U-Boot-Users] mpc8xx, pcmcia to CF, ide
by Travis B. Sawyer 09 Sep '05

09 Sep '05

Greetings u-boot'ers: I've had pretty good luck with my little rpx classic board. I've gotten pcmcia to work (albeit not flawlessly, I toasted one of my pcmcia flash cards). I've run into an interesting problem: When using a pcmcia to CF adapter, I can access the CF on an older CF card (16mb). However, with newer cards (ranging from 32mb to 512mb), the pcmcia driver gets 00's for all of the tuples. Scanning the attribute mem on the old card I can see the the tuples (starting at 0xE000_0000). New cards get 00's at the same address. Up until now, my only dealing with CF has been direct connect to a 440GX peripheral bus in 'True IDE Mode'. My best guess is that the new cards are CF+. The CF spec calls out the tuple arrangement, however, I can't find the CIS tuples. Anyone have any ideas where they may be? Or do I need to utilize some special cycles to make them show up? Per the CF 3.0 spec (CIS Read): /CE2 /CE1 /REG /OE /WE A10 A9 A8-A1 A0 CF: X 0 0 0 1 0 0 XX 0 CF+: X 0 0 0 1 X X XX 0 So, I would assume, that the same cycle could occur for CIS Read?!? Anyone using CF+ on 8xx pcmcia? Thanx for any insight! -Travis

1 2

Re: [U-Boot-Users] Where to start mtest from?
by Martin Egholm Nielsen 09 Sep '05

09 Sep '05

Hi Andrew, >>Is there a way to know what memory segment U-boot uses (stack, etc) so I >>can give the smallest (safe) possible start address for running "mtest" >>on my memory? > you didn't say what your target is, but for mips you can turn on debug > output in lib_mips/board.c and it will print out info about where various > things are in memory. Maybe your target is similar. Oh, sorry - it's PPC. And yes, scanning my board.c I see some debug messages regarding adresses... But as I see them, it's start adresses, hence I need to know the size of, say, u-boot it self and the stack... Or what?! BR, Martin

1 0

RE: [U-Boot-Users] stage-2 loader hangs
by Nghiem, Tien 08 Sep '05

08 Sep '05

It's possible. You have to read your JTAG's documentation. -----Original Message----- From: u-boot-users-admin(a)lists.sourceforge.net [mailto:u-boot-users-admin@lists.sourceforge.net]On Behalf Of Harshapvstus Sent: Thursday, September 08, 2005 1:42 AM To: Wolfgang Denk Cc: manju mahajan; u-boot-users(a)lists.sourceforge.net Subject: Re: [U-Boot-Users] stage-2 loader hangs i have JTAG not BDI2000 is it possible ? ----- Original Message ----- From: "Wolfgang Denk" <wd(a)denx.de> To: "Harshapvstus" <harsha(a)pvst.us> Cc: "manju mahajan" <manjumail(a)yahoo.com>; <u-boot-users(a)lists.sourceforge.net> Sent: Thursday, September 08, 2005 2:32 PM Subject: Re: [U-Boot-Users] stage-2 loader hangs > In message <011401c5b433$ca758b80$0510a8c0@pvst6novr74bnd> you wrote: > > > > I have burned the FLASH for U-boot, > > I would like to debug the u-boot code. > > how can i do. > > Read the manual at http://www.denx.de/twiki/bin/view/DULG/DebuggingUBoot > > Then attach your BDI2000 and start your GDB session. > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd(a)denx.de > People are very flexible and learn to adjust to strange surroundings > -- they can become accustomed to read Lisp and Fortran programs, for > example. - Leon Sterling and Ehud Shapiro, Art of Prolog, MIT Press > > > ------------------------------------------------------- > SF.Net email is Sponsored by the Better Software Conference & EXPO > September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices > Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA > Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.344 / Virus Database: 267.10.19/92 - Release Date: 9/7/2005 > > ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ U-Boot-Users mailing list U-Boot-Users(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users

1 0

[U-Boot-Users] Where to start mtest from?
by Martin Egholm Nielsen 08 Sep '05

08 Sep '05

Hi there, Is there a way to know what memory segment U-boot uses (stack, etc) so I can give the smallest (safe) possible start address for running "mtest" on my memory? // Martin

1 0