August 2004 - U-Boot

Re: Re: [U-Boot-Users] erro occure when compiling mips dbau1000
by 陈国林 19 Aug '04

19 Aug '04

hi, the following is the version info Reading specs from /usr/tools/lib/gcc-lib/mipsel-linux/2.96/specs gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-93.2) GNU ld version 2.11.90.0.24 (with BFD 2.11.90.0.24) should i update them to the same version as yours? ======= 2004-08-19 16:01:26 您在来信中写道：======= >On Wed, 2004-08-18 at 16:52, 陈国林 wrote: >> hello, every one. > >Hi > >> i want to port u-boot to a mips R4X00 based board, so firstly i try to compile the dbau1000 as an example, but when linking, error occure as the following: >> >> make[1]: Leaving directory `/root/u-boot/common' >> UNDEF_SYM=`mipsel-linux-objdump -x lib_generic/libgeneric.a board/dbau1x00/libdbau1x00.a cpu/mips/libmips.a lib_mips/libmips.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a |sed -n -e 's/.*$__u_boot_cmd_.*$/-u\1/p'|sort|uniq`;\ >> mipsel-linux-ld -Bstatic -T /root/u-boot/board/dbau1x00/u-boot.lds -Ttext 0xbfc00000 $UNDEF_SYM cpu/mips/start.o \ >> --start-group lib_generic/libgeneric.a board/dbau1x00/libdbau1x00.a cpu/mips/libmips.a lib_mips/libmips.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a --no-warn-mismatch -L /usr/tools/lib/gcc-lib/mipsel-linux/2.96 -lgcc --end-group \ >> -Map u-boot.map -o u-boot >> cpu/mips/start.o:/root/u-boot/cpu/mips/start.S:275: undefined reference to `_GLOBAL_OFFSET_TABLE_' >> make: *** [u-boot] Error 1 >> >> could anybody give some hints or advices? > >What versions are your gcc/binutils? > >I think I remember seeing this problem some months ago when playing >around with different versions of both. > >In the end I decided to go with binutils 2.13 (neither 2.14 or 2.15.* >worked for me) and gcc 3.2.3. > >regards > / > Leif > > > >------------------------------------------------------- >SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media >100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 >Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. >http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 >_______________________________________________ >U-Boot-Users mailing list >U-Boot-Users(a)lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/u-boot-users > = = = = = = = = = = = = = = = = = = = = 　　　　　　　　致礼！　　　　　　　　陈国林　　　　　　　　glchen(a)ict.ac.cn 　　　　　　　　　　2004-08-19

1 0

[U-Boot-Users] erro occure when compiling mips dbau1000
by 陈国林 19 Aug '04

19 Aug '04

hello, every one. i want to port u-boot to a mips R4X00 based board, so firstly i try to compile the dbau1000 as an example, but when linking, error occure as the following: make[1]: Leaving directory `/root/u-boot/common' UNDEF_SYM=`mipsel-linux-objdump -x lib_generic/libgeneric.a board/dbau1x00/libdbau1x00.a cpu/mips/libmips.a lib_mips/libmips.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a |sed -n -e 's/.*$__u_boot_cmd_.*$/-u\1/p'|sort|uniq`;\ mipsel-linux-ld -Bstatic -T /root/u-boot/board/dbau1x00/u-boot.lds -Ttext 0xbfc00000 $UNDEF_SYM cpu/mips/start.o \ --start-group lib_generic/libgeneric.a board/dbau1x00/libdbau1x00.a cpu/mips/libmips.a lib_mips/libmips.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a --no-warn-mismatch -L /usr/tools/lib/gcc-lib/mipsel-linux/2.96 -lgcc --end-group \ -Map u-boot.map -o u-boot cpu/mips/start.o:/root/u-boot/cpu/mips/start.S:275: undefined reference to `_GLOBAL_OFFSET_TABLE_' make: *** [u-boot] Error 1 could anybody give some hints or advices? best regards glame 　　　　　　　

2 1

[U-Boot-Users] Linux does not start on custom board
by a066＠poczta.onet.pl 19 Aug '04

19 Aug '04

I ported u-boot to custom board and it works fine :) but kernel hangs during initialization :( It hangs in the function free_area_init_core() in the following code: for (i = 0; i < size; i++) { struct page *page = mem_map + offset + 1; .... } function is called from: start_kernel() - setup_arch() - paging_init() - free_area_init() I made sure that: a) IMMR_ADDR (Linux) = CFG_IMMR (u-boot) = 0x02000000 b) struct bd_info are the same in Linux an u-boot c) CONFIGURE_CLOCKS_IN_MHZ is not defined - I have kernel 2.4.24 Do you have any idea what I can do? What is the problem? I use ELDK 3.0. Kernel is from this distribution as well. Configuration of my board for Linux is based on TQM8260 but my console is on SCC1. Log of the session is as follows ----------------------------------------------------------------- U-Boot 1.0.2 (Jul 27 2004 - 10:46:08) MPC8260 Reset Status: External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 8x, VCO Div 2, 60x Bus Freq 12-38 , Core Freq 100-300 - dfbrg 0, corecnf 0x1c, busdf 11, cpmdf 1, plldf 0, pllmf 5 - vco_out 396000000, scc_clk 99000000, brg_clk 99000000 - cpu_clk 264000000, cpm_clk 198000000, bus_clk 33000000 CPU: MPC8260 (HiP4 Rev 14, Mask B.1 4K25A) at 264 MHz Board: RLG005a DRAM: (60x:8COL) 4 MB FLASH: 16 MB In: serial Out: serial Err: serial Net: FCC2 ETHERNET Hit any key to stop autoboot: 0 => bdinfo memstart = 0x00000000 memsize = 0x00400000 flashstart = 0xFE000000 flashsize = 0x01000000 flashoffset = 0x00026000 sramstart = 0x00000000 sramsize = 0x00000000 immr_base = 0x02000000 bootflags = 0x00000001 vco = 396 MHz sccfreq = 99 MHz brgfreq = 99 MHz intfreq = 264 MHz cpmfreq = 198 MHz busfreq = 33 MHz ethaddr = 03:07:19:72:0A:0F IP addr = 192.168.1.175 baudrate = 38400 bps => tftp 200000 uImage Using FCC2 ETHERNET device TFTP from server 192.168.1.10; our IP address is 192.168.1.175 Filename 'uImage'. Load address: 0x200000 Loading: send option "timeout 5" Got OACK: timeout 5 ################################################################# ########################################################### done Bytes transferred = 633138 (9a932 hex) => imi 200000 ## Checking Image at 00200000 ... Image Name: Linux-2.4.24-pre2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 633074 Bytes = 618.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK => bootm 200000 ## Booting image at 00200000 ... Image Name: Linux-2.4.24-pre2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 633074 Bytes = 618.2 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Current stack ends at 0x003B4BA0 AF: => set upper limit to 0x003B43A0 cmdline at 0x003B42A0 ... 0x003B42F1 no initrd image no initrd Transferring control to Linux (at address 00000000) ... ... it hungs here ... but after reset ... U-Boot 1.0.2 (Jul 27 2004 - 10:46:08) MPC8260 Reset Status: External Soft, External Hard MPC8260 Clock Configuration - Bus-to-Core Mult 8x, VCO Div 2, 60x Bus Freq 12-38 , Core Freq 100-300 - dfbrg 0, corecnf 0x1c, busdf 11, cpmdf 1, plldf 0, pllmf 5 - vco_out 396000000, scc_clk 99000000, brg_clk 99000000 - cpu_clk 264000000, cpm_clk 198000000, bus_clk 33000000 CPU: MPC8260 (HiP4 Rev 14, Mask B.1 4K25A) at 264 MHz Board: RLG005a DRAM: (60x:8COL) 4 MB FLASH: 16 MB In: serial Out: serial Err: serial Net: FCC2 ETHERNET Hit any key to stop autoboot: 0 => md 158c74 60 00158c74: 3c363e4d 656d6f72 79204241 54206d61 <6>Memory BAT ma 00158c84: 7070696e 673a2042 4154323d 344d622c pping: BAT2=4Mb, 00158c94: 20424154 333d304d 622c2072 65736964 BAT3=0Mb, resid 00158ca4: 75616c3a 20304d62 0a3c343e 4c696e75 ual: 0Mb.<4>Linu 00158cb4: 78207665 7273696f 6e20322e 342e3234 x version 2.4.24 00158cc4: 2d707265 32202861 72747572 406c696e -pre2 (artur@lin 00158cd4: 75782920 28676363 20766572 73696f6e ux) (gcc version 00158ce4: 20332e32 2e322032 30303330 32313720 3.2.2 20030217 00158cf4: 2859656c 6c6f7720 446f6720 4c696e75 (Yellow Dog Linu 00158d04: 7820332e 3020332e 322e322d 32615f31 x 3.0 3.2.2-2a_1 00158d14: 29292023 39204d6f 6e204175 67203136 )) #9 Mon Aug 16 00158d24: 2031393a 30373a32 36204345 53542032 19:07:26 CEST 2 00158d34: 3030340a 3c343e4f 6e206e6f 64652030 004.<4>On node 0 00158d44: 20746f74 616c7061 6765733a 20313032 totalpages: 102 00158d54: 340a3c34 3e7a6f6e 65283029 3a203130 4.<4>zone(0): 10 00158d64: 32342070 61676573 2e0a3c34 3e626566 24 pages..<4>bef 00158d74: 6f726520 666f722c 2073697a 653d3130 ore for, size=10 00158d84: 32340a00 00000000 00000000 00000000 24.............. 00158d94: 00000000 00000000 00000000 00000000 ................ 00158da4: 00000000 00000000 00000000 00000000 ................ 00158db4: 00000000 00000000 00000000 00000000 ................ 00158dc4: 00000000 00000000 00000000 00000000 ................ 00158dd4: 00000000 00000000 00000000 00000000 ................ 00158de4: 00000000 00000000 00000000 00000000 ................ => Thanks in advance for any suggestions. Artur

2 1

[U-Boot-Users] Boot from SCSI..
by 김종성 19 Aug '04

19 Aug '04

Hi all. I’m using 333MHz sycamore board with the SYM53c875 based LSIU40SE SCSI adapter. And I want to boot the MontaVista Linux from a harddisk connected to the SCSI adapter. I found the 53c8xx supporting code from the u-boot source tree but I don’t know whether that code supports exactly what I want. Please give me some data or instructions. Thank you, in advance.

1 0

[U-Boot-Users] CVS dead - snapshot available for FTP
by Wolfgang Denk 18 Aug '04

18 Aug '04

Hi friends, many people have asked me about the recent problems with anonymous CVS access on SourceForge, but as you probably understand there is very little I can do to help this. What I can do, and did, is provide a snapshot of the current version by FTP. It can be found at ftp://ftp.denx.de/pub/u-boot/u-boot-2004-08-18-2000.tar.bz2 Hope this helps. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd(a)denx.de "There are three principal ways to lose money: wine, women, and engi- neers. While the first two are more pleasant, the third is by far the more certain." - Baron Rothschild, ca. 1800

1 0

[U-Boot-Users] Promise Disk Controller
by RUSSELL PETERSON 18 Aug '04

18 Aug '04

Hello, Anyone out there add support to U-Boot for the Promise PDC20375 disk controller yet?

1 0

[U-Boot-Users] Sourceforge status
by Stephen Williams 18 Aug '04

18 Aug '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 So is the sourceforge[t].net CVS repository down for the count? It's been almost a week since pserver CVS access was available for u-boot. I was rather hoping to do an update and CVS diff to make up a patch, but there is currently no CVS repository for me to diff against... ? - -- Steve Williams "The woods are lovely, dark and deep. steve at icarus.com But I have promises to keep, http://www.icarus.com and lines to code before I sleep, http://www.picturel.com And lines to code before I sleep." -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFBIrM7rPt1Sc2b3ikRAnunAKCimaqIxyeFxSkVddcMnFJjkxJmtQCeKkpi pdtoqLGjgLaWChD8mPI5rzQ= =WhKh -----END PGP SIGNATURE-----

6 7

[U-Boot-Users] NAND S3C2410 LN2410SBC
by David Farrell 18 Aug '04

18 Aug '04

Hello to the group, I reviewed the email archive I hope I don't repeat anything. I have just created (mostly copied) a port to the CyberLab LN2410SBC board. I have several questions before submitting any patch. What is the status of the NAND code? I have the S3C2410 reporting my chip but I have 2040 or 2048 bad blocks. I'll work through it, but I don't want to repeat what someone else has aleady done. I have reviewed the thread on the arm920t subdirectory structure, I'll follow this for s3c2410x. Why are there flash drivers in the board directories? Is this general enough to be a driver? Should CMD_xxx or CONFIG_ xxx defines be used at this level? ps: There is a problem with the memsetup.S code of the smdk2410 the sub r0, r0, r1 should be sub r2, r0, r1 to copy the table correctly. David.

3 2

[U-Boot-Users] compiling arm-boot failed
by Rongjun Lu 17 Aug '04

17 Aug '04

when I compiled arm-boot with the toolchains from SNAPGEAR(arm-linux-tools-20031127), following errors occured: ---------------------------------------------------- arm-linux-ld -nostdlib -Bstatic -T board/samsung/armboot.lds -Ttext 0x0c170000 cpu/arm920t/start.o common/libcommon.a fs/jffs2/libjffs2.a net/libnet.a disk/libdisk.a board/samsung/libsamsung.a cpu/arm920t/libarm920t.a drivers/libdrivers.a common/libcommon.a //home/lurj/board_tms5471/build-tools/usr/local/bin/../lib/gcc-lib/arm-linux/3.3.2/libgcc.a -Map armboot.map -o armboot arm-linux-ld: ERROR: //home/lurj/board_tms5471/build-tools/usr/local/bin/../lib/gcc-lib/arm-linux/3.3.2/libgcc.a(_udivsi3.o) uses hardware FP, whereas armboot uses software FP File in wrong format: failed to merge target specific data of file //home/lurj/board_tms5471/build-tools/usr/local/bin/../lib/gcc-lib/arm-linux/3.3.2/libgcc.a(_udivsi3.o) arm-linux-ld: ERROR: //home/lurj/board_tms5471/build-tools/usr/local/bin/../lib/gcc-lib/arm-linux/3.3.2/libgcc.a(_umodsi3.o) uses hardware FP, whereas armboot uses software FP File in wrong format: failed to merge target specific data of file //home/lurj/board_tms5471/build-tools/usr/local/bin/../lib/gcc-lib/arm-linux/3.3.2/libgcc.a(_umodsi3.o) arm-linux-ld: ERROR: //home/lurj/board_tms5471/build-tools/usr/local/bin/../lib/gcc-lib/arm-linux/3.3.2/libgcc.a(_dvmd_lnx.o) uses hardware FP, whereas armboot uses software FP File in wrong format: failed to merge target specific data of file //home/lurj/board_tms5471/build-tools/usr/local/bin/../lib/gcc-lib/arm-linux/3.3.2/libgcc.a(_dvmd_lnx.o) ---------------------------------------------------- who can help me?Thanks

3 2

[U-Boot-Users] decoding 'program check exception trap'
by Amit Shah 17 Aug '04

17 Aug '04

Hi all, I have u-boot working on a custom board based on the MV64360 with a PPC 750GX processor. I've set the autoboot timeout to 3 secs, with the bootcmd to 'go 0x40004'. I have a 'serial_getc' in main_loop so that I can transfer a binary to the 40004 mem. location using a PCI interface via the host machine. On timeout, u-boot tries to transfer control to the binary, but it seems there's some problem: ## Starting application at 0x00040004 ... NIP: 00040004 XER: 00000000 LR: 0FFE7824 REGS: 0ff9db70 TRAP: 0700 DAR: 3DFEFEF7 MSR: 00088030 EE: 1 PR: 0 FP: 0 ME: 0 IR/DR: 11 GPR262144: 0FFE7814 0FF9DC60 00000080 00000001 0FF9DE94 00000010 FFFFFFFE 00000004 GPR08: 00000041 00000000 FFFFFFFF F1009010 00000000 00040000 00040000 00040000 GPR262144: 00040000 00040000 15DB7FF4 F79EFBFF 7EBBBBEF 00000001 DFEFBF6F 00000001 GPR24: 80006200 0FF9DE90 00000000 00000001 00040000 0FF9DF98 10005058 00040000 696e6720: ff ff ff fe 3f ff ff df ff fe ff 696e6720 ff ff ff ff 0003fff0: ff df 7f ff f7 ff ed ff ff ff bf ff 77 ff f6 fd 00040000: 00 d0 696e6720 696e6720 696e6720 d0 00 d0 ff f5 696e6720 696e6720 bf 696e6720 696e6720 696e6720 696e6720: 696e6720 696e6720 696e6720 696e6720 eb df bf ff 696e6720 696e6720 696e6720 fd fa fe ff ff 00040020: f7 ff 77 df ff ef 7f ff 3f 9f ff 4f ff ff f9 df 00040030: ef fe ef fe ff ff ff ff bf f7 fb 696e6720 696e6720 696e6720 fe ff 00040040: ff ff 77 ff 7f 5f 696e6720 696e6720 fb 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720: 696e6720 ff bf ef cf ef ff 7f fe fe ff ff 696e6720 696e6720 ff ff 00040060: f7 ff ff df f6 ff 7f ff 35 ff f5 ff b7 7f e7 ff 00040070: ff ff ef af df ff fe 696e6720 696e6720 696e6720 fe fa ef f7 fe 696e6720 696e6720: 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 ff 7f e6 696e6720 696e6720 696e6720: 696e6720 696e6720 ab 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 696e6720 fe ff 6f ff 000400a0: ff ff ff ed 696e6720 696e6720 ff 7f d7 df fd ff ff 77 f5 bf 000400b0: fa bf ff ff ff bf ff 7d fe ff bb bb ff fe ef ff 000400c0: 696e6720 696e6720 ff ef d4 696e6720 df ff df f7 df ff eb 7f 69 bf 000400d0: fb ff ff ff fe ef fe ff eb ff fa ff f7 fb ae 63 Call backtrace: Program Check Exception Since the 'call backtrace' has no pointers, I can't use the 'backtrace' script to decode stuff. Anyways, I think that won't help here, since I know what the control flow is. Is SRR1 stored anywhere? That could help me why exception 0x700 is being caused. Also, can this be due to some caching? It should not, 'cos there shouldn't have been any access to this location earlier for the data at that location to be cached, but one possibility that I can think of right now. Any help appreciated. Thanks, Amit. -- Amit Shah http://amitshah.nav.to/

2 10