Hardware accelerated support for SHA-1 and SHA-256 has been added. Hash command enabled along with hardware accelerated support for SHA-1 and SHA-256 for platforms which have CAAM block.

Signed-off-by: Ruchika Gupta ruchika.gupta@freescale.com --- Changes from v1: Rebased to HEAD of uboot Compilation warning fixed in ls1021atwr build

arch/arm/include/asm/arch-ls102xa/config.h | 8 ++++++++ board/freescale/ls1021aqds/ls1021aqds.c | 10 ++++++++++ board/freescale/ls1021atwr/ls1021atwr.c | 10 ++++++++++ include/configs/ls1021aqds.h | 6 ++++++ include/configs/ls1021atwr.h | 6 ++++++ 5 files changed, 40 insertions(+)

diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index a500b5b..588f37b 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -20,6 +20,8 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) #define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000) #define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000) +#define CONFIG_SYS_FSL_SEC_ADDR (CONFIG_SYS_IMMR + 0x700000) +#define CONFIG_SYS_FSL_JR0_ADDR (CONFIG_SYS_IMMR + 0x710000) #define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000) #define CONFIG_SYS_FSL_LS1_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000) #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) @@ -66,6 +68,7 @@ #define CONFIG_SYS_FSL_DSPI_BE #define CONFIG_SYS_FSL_QSPI_BE #define CONFIG_SYS_FSL_DCU_BE +#define CONFIG_SYS_FSL_SEC_LE

#define DCU_LAYER_MAX_NUM 16

@@ -76,8 +79,13 @@ #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 +#define CONFIG_SYS_FSL_SEC_COMPAT 5 #else #error SoC not defined #endif

+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4 +#define CONFIG_FSL_CAAM +#endif + #endif /* _ASM_ARMV7_LS102XA_CONFIG_ */ diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 12e83f7..d6278b9 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -13,6 +13,7 @@ #include <mmc.h> #include <fsl_esdhc.h> #include <fsl_ifc.h> +#include <fsl_sec.h>

#include "../common/qixis.h" #include "ls1021aqds_qixis.h" @@ -213,6 +214,15 @@ int config_serdes_mux(void) return 0; }

+#if defined(CONFIG_MISC_INIT_R) +int misc_init_r(void) +{ + if (sec_init() < 0) + return -1; + return 0; +} +#endif + int board_init(void) { struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index b522ff2..469b502 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -16,6 +16,7 @@ #include <netdev.h> #include <fsl_mdio.h> #include <tsec.h> +#include <fsl_sec.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -280,6 +281,15 @@ int board_init(void) return 0; }

+#if defined(CONFIG_MISC_INIT_R) +int misc_init_r(void) +{ + if (sec_init() < 0) + return -1; + return 0; +} +#endif + void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index bb47813..e1ca78a 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -388,4 +388,10 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_OF_BOARD_SETUP #define CONFIG_CMD_BOOTZ

+#define CONFIG_MISC_INIT_R + +/* Hash command with SHA acceleration supported in hardware */ +#define CONFIG_CMD_HASH +#define CONFIG_SHA_HW_ACCEL + #endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 45b2272..7199c92 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -288,4 +288,10 @@ #define CONFIG_OF_BOARD_SETUP #define CONFIG_CMD_BOOTZ

+#define CONFIG_MISC_INIT_R + +/* Hash command with SHA acceleration supported in hardware */ +#define CONFIG_CMD_HASH +#define CONFIG_SHA_HW_ACCEL + #endif