This commit imports HI3660 SoC devicetree from Linux

Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org --- arch/arm/dts/hi3660.dtsi | 1157 ++++++++++++++++++++++ arch/arm/dts/hikey960-pinctrl.dtsi | 1060 ++++++++++++++++++++ include/dt-bindings/clock/hi3660-clock.h | 214 ++++ 3 files changed, 2431 insertions(+) create mode 100644 arch/arm/dts/hi3660.dtsi create mode 100644 arch/arm/dts/hikey960-pinctrl.dtsi create mode 100644 include/dt-bindings/clock/hi3660-clock.h

diff --git a/arch/arm/dts/hi3660.dtsi b/arch/arm/dts/hi3660.dtsi new file mode 100644 index 0000000000..65a45b0e80 --- /dev/null +++ b/arch/arm/dts/hi3660.dtsi @@ -0,0 +1,1157 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon Hi3660 SoC + * + * Copyright (C) 2016, Hisilicon Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/hi3660-clock.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "hisilicon,hi3660"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + dynamic-power-coefficient = <110>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a73"; + device_type = "cpu"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; + capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + dynamic-power-coefficient = <550>; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a73"; + device_type = "cpu"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; + capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a73"; + device_type = "cpu"; + reg = <0x0 0x102>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; + capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a73"; + device_type = "cpu"; + reg = <0x0 0x103>; + enable-method = "psci"; + next-level-cache = <&A73_L2>; + cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>; + capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <400>; + exit-latency-us = <650>; + min-residency-us = <1500>; + }; + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <500>; + exit-latency-us = <1600>; + min-residency-us = <3500>; + }; + + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <400>; + exit-latency-us = <550>; + min-residency-us = <1500>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <800>; + exit-latency-us = <2900>; + min-residency-us = <3500>; + }; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + + A73_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <700000>; + clock-latency-ns = <300000>; + }; + + opp01 { + opp-hz = /bits/ 64 <999000000>; + opp-microvolt = <800000>; + clock-latency-ns = <300000>; + }; + + opp02 { + opp-hz = /bits/ 64 <1402000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + }; + + opp03 { + opp-hz = /bits/ 64 <1709000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + + opp04 { + opp-hz = /bits/ 64 <1844000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp10 { + opp-hz = /bits/ 64 <903000000>; + opp-microvolt = <700000>; + clock-latency-ns = <300000>; + }; + + opp11 { + opp-hz = /bits/ 64 <1421000000>; + opp-microvolt = <800000>; + clock-latency-ns = <300000>; + }; + + opp12 { + opp-hz = /bits/ 64 <1805000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + }; + + opp13 { + opp-hz = /bits/ 64 <2112000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + + opp14 { + opp-hz = /bits/ 64 <2362000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + }; + + gic: interrupt-controller@e82b0000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */ + <0x0 0xe82b2000 0 0x2000>, /* GICC */ + <0x0 0xe82b4000 0 0x2000>, /* GICH */ + <0x0 0xe82b6000 0 0x2000>; /* GICV */ + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + a53-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + a73-pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, + <&cpu5>, + <&cpu6>, + <&cpu7>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + crg_ctrl: crg_ctrl@fff35000 { + compatible = "hisilicon,hi3660-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; + }; + + crg_rst: crg_rst_controller { + compatible = "hisilicon,hi3660-reset"; + #reset-cells = <2>; + hisi,rst-syscon = <&crg_ctrl>; + }; + + + pctrl: pctrl@e8a09000 { + compatible = "hisilicon,hi3660-pctrl", "syscon"; + reg = <0x0 0xe8a09000 0x0 0x2000>; + #clock-cells = <1>; + }; + + pmuctrl: crg_ctrl@fff34000 { + compatible = "hisilicon,hi3660-pmuctrl", "syscon"; + reg = <0x0 0xfff34000 0x0 0x1000>; + #clock-cells = <1>; + }; + + sctrl: sctrl@fff0a000 { + compatible = "hisilicon,hi3660-sctrl", "syscon"; + reg = <0x0 0xfff0a000 0x0 0x1000>; + #clock-cells = <1>; + }; + + iomcu: iomcu@ffd7e000 { + compatible = "hisilicon,hi3660-iomcu", "syscon"; + reg = <0x0 0xffd7e000 0x0 0x1000>; + #clock-cells = <1>; + + }; + + iomcu_rst: reset { + compatible = "hisilicon,hi3660-reset"; + hisi,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + + mailbox: mailbox@e896b000 { + compatible = "hisilicon,hi3660-mbox"; + reg = <0x0 0xe896b000 0x0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <3>; + }; + + stub_clock: stub_clock@e896b500 { + compatible = "hisilicon,hi3660-stub-clk"; + reg = <0x0 0xe896b500 0x0 0x0100>; + #clock-cells = <1>; + mboxes = <&mailbox 13 3 0>; + }; + + dual_timer0: timer@fff14000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x0 0xfff14000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>, + <&crg_ctrl HI3660_OSC32K>, + <&crg_ctrl HI3660_OSC32K>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + i2c0: i2c@ffd71000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd71000 0x0 0x1000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; + resets = <&iomcu_rst 0x20 3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; + + i2c1: i2c@ffd72000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd72000 0x0 0x1000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>; + resets = <&iomcu_rst 0x20 4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; + status = "disabled"; + }; + + i2c3: i2c@fdf0c000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0c000 0x0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>; + resets = <&crg_rst 0x78 7>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>; + status = "disabled"; + }; + + i2c7: i2c@fdf0b000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0b000 0x0 0x1000>; + interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>; + resets = <&crg_rst 0x60 14>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>; + status = "disabled"; + }; + + uart0: serial@fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; + status = "disabled"; + }; + + uart1: serial@fdf00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf00000 0x0 0x1000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 2 &dma0 3>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>, + <&crg_ctrl HI3660_CLK_GATE_UART1>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; + status = "disabled"; + }; + + uart2: serial@fdf03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf03000 0x0 0x1000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 4 &dma0 5>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; + status = "disabled"; + }; + + uart3: serial@ffd74000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xffd74000 0x0 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_FACTOR_UART3>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + status = "disabled"; + }; + + uart4: serial@fdf01000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf01000 0x0 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 6 &dma0 7>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>, + <&crg_ctrl HI3660_CLK_GATE_UART4>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; + status = "disabled"; + }; + + uart5: serial@fdf05000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf05000 0x0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + dma-names = "rx", "tx"; + dmas = <&dma0 8 &dma0 9>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, + <&crg_ctrl HI3660_CLK_GATE_UART5>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>; + status = "disabled"; + }; + + uart6: serial@fff32000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfff32000 0x0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clock = <19200000>; + clocks = <&crg_ctrl HI3660_CLK_UART6>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>; + status = "disabled"; + }; + + dma0: dma@fdf30000 { + compatible = "hisilicon,k3-dma-1.0"; + reg = <0x0 0xfdf30000 0x0 0x1000>; + #dma-cells = <1>; + dma-channels = <16>; + dma-requests = <32>; + dma-channel-mask = <0xfffe>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>; + dma-no-cci; + dma-type = "hi3660_dma"; + }; + + asp_dmac: dma-controller@e804b000 { + compatible = "hisilicon,hisi-pcm-asp-dma-1.0"; + reg = <0x0 0xe804b000 0x0 0x1000>; + #dma-cells = <1>; + dma-channels = <16>; + dma-requests = <32>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "asp_dma_irq"; + }; + + rtc0: rtc@fff04000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x0 0Xfff04000 0x0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + }; + + gpio0: gpio@e8a0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0b000 0 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 0 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@e8a0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0c000 0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 7 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@e8a0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0d000 0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 14 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@e8a0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0e000 0 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 22 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@e8a0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0f000 0 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 30 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio@e8a10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a10000 0 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 38 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio@e8a11000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a11000 0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 46 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO6>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio@e8a12000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a12000 0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 54 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO7>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio@e8a13000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a13000 0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 62 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO8>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio@e8a14000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a14000 0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 70 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO9>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio@e8a15000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a15000 0 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 78 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO10>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio@e8a16000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a16000 0 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 86 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO11>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio@e8a17000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a17000 0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO12>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio@e8a18000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a18000 0 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 102 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO13>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio@e8a19000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a19000 0 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 110 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO14>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio@e8a1a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1a000 0 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 118 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO15>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio@e8a1b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1b000 0 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO16>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio@e8a1c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1c000 0 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO17>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio@ff3b4000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xff3b4000 0 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx2 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO18>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio@ff3b5000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xff3b5000 0 0x1000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx2 0 8 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO19>; + clock-names = "apb_pclk"; + }; + + gpio20: gpio@e8a1f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1f000 0 0x1000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx1 0 0 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO20>; + clock-names = "apb_pclk"; + }; + + gpio21: gpio@e8a20000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a20000 0 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&pmx3 0 0 6>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO21>; + clock-names = "apb_pclk"; + }; + + gpio22: gpio@fff0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0b000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO176 */ + gpio-ranges = <&pmx4 2 0 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio23: gpio@fff0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0c000 0 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO184 */ + gpio-ranges = <&pmx4 0 6 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio24: gpio@fff0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0d000 0 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO192 */ + gpio-ranges = <&pmx4 0 13 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio25: gpio@fff0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0e000 0 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO200 */ + gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio26: gpio@fff0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0f000 0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO208 */ + gpio-ranges = <&pmx4 0 28 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio27: gpio@fff10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff10000 0 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO216 */ + gpio-ranges = <&pmx4 0 36 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio28: gpio@fff1d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff1d000 0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO6>; + clock-names = "apb_pclk"; + }; + + spi2: spi@ffd68000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xffd68000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pmx_func>; + num-cs = <1>; + cs-gpios = <&gpio27 2 0>; + status = "disabled"; + }; + + spi3: spi@ff3b3000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xff3b3000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pmx_func>; + num-cs = <1>; + cs-gpios = <&gpio18 5 0>; + status = "disabled"; + }; + + pcie@f4000000 { + compatible = "hisilicon,kirin960-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000>, + <0x0 0xff3fe000 0x0 0x1000>, + <0x0 0xf3f20000 0x0 0x40000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "phy", "config"; + bus-range = <0x0 0x1>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupts = <0 283 4>; + interrupt-names = "msi"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 + &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 + &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 + &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 + &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; + clock-names = "pcie_phy_ref", "pcie_aux", + "pcie_apb_phy", "pcie_apb_sys", + "pcie_aclk"; + reset-gpios = <&gpio11 1 0 >; + }; + + /* UFS */ + ufs: ufs@ff3b0000 { + compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1"; + /* 0: HCI standard */ + /* 1: UFS SYS CTRL */ + reg = <0x0 0xff3b0000 0x0 0x1000>, + <0x0 0xff3b1000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>, + <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>; + clock-names = "ref_clk", "phy_clk"; + freq-table-hz = <0 0>, <0 0>; + /* offset: 0x84; bit: 12 */ + resets = <&crg_rst 0x84 12>; + reset-names = "rst"; + }; + + /* SD */ + dwmmc1: dwmmc1@ff37f000 { + compatible = "hisilicon,hi3660-dw-mshc"; + reg = <0x0 0xff37f000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SD>, + <&crg_ctrl HI3660_HCLK_GATE_SD>; + clock-names = "ciu", "biu"; + clock-frequency = <3200000>; + resets = <&crg_rst 0x94 18>; + reset-names = "reset"; + hisilicon,peripheral-syscon = <&sctrl>; + card-detect-delay = <200>; + status = "disabled"; + }; + + /* SDIO */ + dwmmc2: dwmmc2@ff3ff000 { + compatible = "hisilicon,hi3660-dw-mshc"; + reg = <0x0 0xff3ff000 0x0 0x1000>; + #address-cells = <0x1>; + #size-cells = <0x0>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>, + <&crg_ctrl HI3660_HCLK_GATE_SDIO0>; + clock-names = "ciu", "biu"; + resets = <&crg_rst 0x94 20>; + reset-names = "reset"; + card-detect-delay = <200>; + status = "disabled"; + }; + + watchdog0: watchdog@e8a06000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xe8a06000 0x0 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>; + clock-names = "apb_pclk"; + }; + + watchdog1: watchdog@e8a07000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xe8a07000 0x0 0x1000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>; + clock-names = "apb_pclk"; + }; + + tsensor: tsensor@fff30000 { + compatible = "hisilicon,hi3660-tsensor"; + reg = <0x0 0xfff30000 0x0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + + cls0: cls0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <4500>; + + /* sensor ID */ + thermal-sensors = <&tsensor 1>; + + trips { + threshold: trip-point@0 { + temperature = <65000>; + hysteresis = <1000>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <75000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + contribution = <1024>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&target>; + contribution = <512>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/dts/hikey960-pinctrl.dtsi b/arch/arm/dts/hikey960-pinctrl.dtsi new file mode 100644 index 0000000000..d11efc8195 --- /dev/null +++ b/arch/arm/dts/hikey960-pinctrl.dtsi @@ -0,0 +1,1060 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * pinctrl dts fils for Hislicon HiKey960 development board + * + */ + +#include <dt-bindings/pinctrl/hisi.h> + +/ { + soc { + /* [IOMG_000, IOMG_123] */ + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + pmx0: pinmux@e896c000 { + compatible = "pinctrl-single"; + reg = <0x0 0xe896c000 0x0 0x1f0>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = < + &range 0 7 0 + &range 8 116 0>; + + pmu_pmx_func: pmu_pmx_func { + pinctrl-single,pins = < + 0x008 MUX_M1 /* PMU1_SSI */ + 0x00c MUX_M1 /* PMU2_SSI */ + 0x010 MUX_M1 /* PMU_CLKOUT */ + 0x100 MUX_M1 /* PMU_HKADC_SSI */ + >; + }; + + csi0_pwd_n_pmx_func: csi0_pwd_n_pmx_func { + pinctrl-single,pins = < + 0x044 MUX_M0 /* CSI0_PWD_N */ + >; + }; + + csi1_pwd_n_pmx_func: csi1_pwd_n_pmx_func { + pinctrl-single,pins = < + 0x04c MUX_M0 /* CSI1_PWD_N */ + >; + }; + + isp0_pmx_func: isp0_pmx_func { + pinctrl-single,pins = < + 0x058 MUX_M1 /* ISP_CLK0 */ + 0x064 MUX_M1 /* ISP_SCL0 */ + 0x068 MUX_M1 /* ISP_SDA0 */ + >; + }; + + isp1_pmx_func: isp1_pmx_func { + pinctrl-single,pins = < + 0x05c MUX_M1 /* ISP_CLK1 */ + 0x06c MUX_M1 /* ISP_SCL1 */ + 0x070 MUX_M1 /* ISP_SDA1 */ + >; + }; + + pwr_key_pmx_func: pwr_key_pmx_func { + pinctrl-single,pins = < + 0x080 MUX_M0 /* GPIO_034 */ + >; + }; + + i2c3_pmx_func: i2c3_pmx_func { + pinctrl-single,pins = < + 0x02c MUX_M1 /* I2C3_SCL */ + 0x030 MUX_M1 /* I2C3_SDA */ + >; + }; + + i2c4_pmx_func: i2c4_pmx_func { + pinctrl-single,pins = < + 0x090 MUX_M1 /* I2C4_SCL */ + 0x094 MUX_M1 /* I2C4_SDA */ + >; + }; + + pcie_perstn_pmx_func: pcie_perstn_pmx_func { + pinctrl-single,pins = < + 0x15c MUX_M1 /* PCIE_PERST_N */ + >; + }; + + usbhub5734_pmx_func: usbhub5734_pmx_func { + pinctrl-single,pins = < + 0x11c MUX_M0 /* GPIO_073 */ + 0x120 MUX_M0 /* GPIO_074 */ + >; + }; + + uart0_pmx_func: uart0_pmx_func { + pinctrl-single,pins = < + 0x0cc MUX_M2 /* UART0_RXD */ + 0x0d0 MUX_M2 /* UART0_TXD */ + >; + }; + + uart1_pmx_func: uart1_pmx_func { + pinctrl-single,pins = < + 0x0b0 MUX_M2 /* UART1_CTS_N */ + 0x0b4 MUX_M2 /* UART1_RTS_N */ + 0x0a8 MUX_M2 /* UART1_RXD */ + 0x0ac MUX_M2 /* UART1_TXD */ + >; + }; + + uart2_pmx_func: uart2_pmx_func { + pinctrl-single,pins = < + 0x0bc MUX_M2 /* UART2_CTS_N */ + 0x0c0 MUX_M2 /* UART2_RTS_N */ + 0x0c8 MUX_M2 /* UART2_RXD */ + 0x0c4 MUX_M2 /* UART2_TXD */ + >; + }; + + uart3_pmx_func: uart3_pmx_func { + pinctrl-single,pins = < + 0x0dc MUX_M1 /* UART3_CTS_N */ + 0x0e0 MUX_M1 /* UART3_RTS_N */ + 0x0e4 MUX_M1 /* UART3_RXD */ + 0x0e8 MUX_M1 /* UART3_TXD */ + >; + }; + + uart4_pmx_func: uart4_pmx_func { + pinctrl-single,pins = < + 0x0ec MUX_M1 /* UART4_CTS_N */ + 0x0f0 MUX_M1 /* UART4_RTS_N */ + 0x0f4 MUX_M1 /* UART4_RXD */ + 0x0f8 MUX_M1 /* UART4_TXD */ + >; + }; + + uart5_pmx_func: uart5_pmx_func { + pinctrl-single,pins = < + 0x0c4 MUX_M3 /* UART5_CTS_N */ + 0x0c8 MUX_M3 /* UART5_RTS_N */ + 0x0bc MUX_M3 /* UART5_RXD */ + 0x0c0 MUX_M3 /* UART5_TXD */ + >; + }; + + uart6_pmx_func: uart6_pmx_func { + pinctrl-single,pins = < + 0x0cc MUX_M1 /* UART6_CTS_N */ + 0x0d0 MUX_M1 /* UART6_RTS_N */ + 0x0d4 MUX_M1 /* UART6_RXD */ + 0x0d8 MUX_M1 /* UART6_TXD */ + >; + }; + + cam0_rst_pmx_func: cam0_rst_pmx_func { + pinctrl-single,pins = < + 0x0c8 MUX_M0 /* CAM0_RST */ + >; + }; + + cam1_rst_pmx_func: cam1_rst_pmx_func { + pinctrl-single,pins = < + 0x124 MUX_M0 /* CAM1_RST */ + >; + }; + }; + + /* [IOMG_MMC0_000, IOMG_MMC0_005] */ + pmx1: pinmux@ff37e000 { + compatible = "pinctrl-single"; + reg = <0x0 0xff37e000 0x0 0x18>; + #gpio-range-cells = <0x3>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 6 0>; + + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SD_CLK */ + 0x004 MUX_M1 /* SD_CMD */ + 0x008 MUX_M1 /* SD_DATA0 */ + 0x00c MUX_M1 /* SD_DATA1 */ + 0x010 MUX_M1 /* SD_DATA2 */ + 0x014 MUX_M1 /* SD_DATA3 */ + >; + }; + }; + + /* [IOMG_FIX_000, IOMG_FIX_011] */ + pmx2: pinmux@ff3b6000 { + compatible = "pinctrl-single"; + reg = <0x0 0xff3b6000 0x0 0x30>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 12 0>; + + ufs_pmx_func: ufs_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* UFS_REF_CLK */ + 0x004 MUX_M1 /* UFS_RST_N */ + >; + }; + + spi3_pmx_func: spi3_pmx_func { + pinctrl-single,pins = < + 0x008 MUX_M1 /* SPI3_CLK */ + 0x00c MUX_M1 /* SPI3_DI */ + 0x010 MUX_M1 /* SPI3_DO */ + 0x014 MUX_M1 /* SPI3_CS0_N */ + >; + }; + }; + + /* [IOMG_MMC1_000, IOMG_MMC1_005] */ + pmx3: pinmux@ff3fd000 { + compatible = "pinctrl-single"; + reg = <0x0 0xff3fd000 0x0 0x18>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 6 0>; + + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SDIO_CLK */ + 0x004 MUX_M1 /* SDIO_CMD */ + 0x008 MUX_M1 /* SDIO_DATA0 */ + 0x00c MUX_M1 /* SDIO_DATA1 */ + 0x010 MUX_M1 /* SDIO_DATA2 */ + 0x014 MUX_M1 /* SDIO_DATA3 */ + >; + }; + }; + + /* [IOMG_AO_000, IOMG_AO_041] */ + pmx4: pinmux@fff11000 { + compatible = "pinctrl-single"; + reg = <0x0 0xfff11000 0x0 0xa8>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base in node, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 42 0>; + + i2s2_pmx_func: i2s2_pmx_func { + pinctrl-single,pins = < + 0x044 MUX_M1 /* I2S2_DI */ + 0x048 MUX_M1 /* I2S2_DO */ + 0x04c MUX_M1 /* I2S2_XCLK */ + 0x050 MUX_M1 /* I2S2_XFS */ + >; + }; + + slimbus_pmx_func: slimbus_pmx_func { + pinctrl-single,pins = < + 0x02c MUX_M1 /* SLIMBUS_CLK */ + 0x030 MUX_M1 /* SLIMBUS_DATA */ + >; + }; + + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0x014 MUX_M1 /* I2C0_SCL */ + 0x018 MUX_M1 /* I2C0_SDA */ + >; + }; + + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0x01c MUX_M1 /* I2C1_SCL */ + 0x020 MUX_M1 /* I2C1_SDA */ + >; + }; + + i2c7_pmx_func: i2c7_pmx_func { + pinctrl-single,pins = < + 0x024 MUX_M3 /* I2C7_SCL */ + 0x028 MUX_M3 /* I2C7_SDA */ + >; + }; + + pcie_pmx_func: pcie_pmx_func { + pinctrl-single,pins = < + 0x084 MUX_M1 /* PCIE_CLKREQ_N */ + 0x088 MUX_M1 /* PCIE_WAKE_N */ + >; + }; + + spi2_pmx_func: spi2_pmx_func { + pinctrl-single,pins = < + 0x08c MUX_M1 /* SPI2_CLK */ + 0x090 MUX_M1 /* SPI2_DI */ + 0x094 MUX_M1 /* SPI2_DO */ + 0x098 MUX_M1 /* SPI2_CS0_N */ + >; + }; + + i2s0_pmx_func: i2s0_pmx_func { + pinctrl-single,pins = < + 0x034 MUX_M1 /* I2S0_DI */ + 0x038 MUX_M1 /* I2S0_DO */ + 0x03c MUX_M1 /* I2S0_XCLK */ + 0x040 MUX_M1 /* I2S0_XFS */ + >; + }; + }; + + pmx5: pinmux@e896c800 { + compatible = "pinconf-single"; + reg = <0x0 0xe896c800 0x0 0x200>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + pmu_cfg_func: pmu_cfg_func { + pinctrl-single,pins = < + 0x010 0x0 /* PMU1_SSI */ + 0x014 0x0 /* PMU2_SSI */ + 0x018 0x0 /* PMU_CLKOUT */ + 0x10c 0x0 /* PMU_HKADC_SSI */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + + i2c3_cfg_func: i2c3_cfg_func { + pinctrl-single,pins = < + 0x038 0x0 /* I2C3_SCL */ + 0x03c 0x0 /* I2C3_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + csi0_pwd_n_cfg_func: csi0_pwd_n_cfg_func { + pinctrl-single,pins = < + 0x050 0x0 /* CSI0_PWD_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + csi1_pwd_n_cfg_func: csi1_pwd_n_cfg_func { + pinctrl-single,pins = < + 0x058 0x0 /* CSI1_PWD_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + isp0_cfg_func: isp0_cfg_func { + pinctrl-single,pins = < + 0x064 0x0 /* ISP_CLK0 */ + 0x070 0x0 /* ISP_SCL0 */ + 0x074 0x0 /* ISP_SDA0 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK>; + }; + + isp1_cfg_func: isp1_cfg_func { + pinctrl-single,pins = < + 0x068 0x0 /* ISP_CLK1 */ + 0x078 0x0 /* ISP_SCL1 */ + 0x07c 0x0 /* ISP_SDA1 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + pwr_key_cfg_func: pwr_key_cfg_func { + pinctrl-single,pins = < + 0x08c 0x0 /* GPIO_034 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart1_cfg_func: uart1_cfg_func { + pinctrl-single,pins = < + 0x0b4 0x0 /* UART1_RXD */ + 0x0b8 0x0 /* UART1_TXD */ + 0x0bc 0x0 /* UART1_CTS_N */ + 0x0c0 0x0 /* UART1_RTS_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart2_cfg_func: uart2_cfg_func { + pinctrl-single,pins = < + 0x0c8 0x0 /* UART2_CTS_N */ + 0x0cc 0x0 /* UART2_RTS_N */ + 0x0d0 0x0 /* UART2_TXD */ + 0x0d4 0x0 /* UART2_RXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart5_cfg_func: uart5_cfg_func { + pinctrl-single,pins = < + 0x0c8 0x0 /* UART5_RXD */ + 0x0cc 0x0 /* UART5_TXD */ + 0x0d0 0x0 /* UART5_CTS_N */ + 0x0d4 0x0 /* UART5_RTS_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + cam0_rst_cfg_func: cam0_rst_cfg_func { + pinctrl-single,pins = < + 0x0d4 0x0 /* CAM0_RST */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + uart0_cfg_func: uart0_cfg_func { + pinctrl-single,pins = < + 0x0d8 0x0 /* UART0_RXD */ + 0x0dc 0x0 /* UART0_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart6_cfg_func: uart6_cfg_func { + pinctrl-single,pins = < + 0x0d8 0x0 /* UART6_CTS_N */ + 0x0dc 0x0 /* UART6_RTS_N */ + 0x0e0 0x0 /* UART6_RXD */ + 0x0e4 0x0 /* UART6_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart3_cfg_func: uart3_cfg_func { + pinctrl-single,pins = < + 0x0e8 0x0 /* UART3_CTS_N */ + 0x0ec 0x0 /* UART3_RTS_N */ + 0x0f0 0x0 /* UART3_RXD */ + 0x0f4 0x0 /* UART3_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart4_cfg_func: uart4_cfg_func { + pinctrl-single,pins = < + 0x0f8 0x0 /* UART4_CTS_N */ + 0x0fc 0x0 /* UART4_RTS_N */ + 0x100 0x0 /* UART4_RXD */ + 0x104 0x0 /* UART4_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + cam1_rst_cfg_func: cam1_rst_cfg_func { + pinctrl-single,pins = < + 0x130 0x0 /* CAM1_RST */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + }; + + pmx6: pinmux@ff3b6800 { + compatible = "pinconf-single"; + reg = <0x0 0xff3b6800 0x0 0x18>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + ufs_cfg_func: ufs_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* UFS_REF_CLK */ + 0x004 0x0 /* UFS_RST_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_08MA DRIVE6_MASK + >; + }; + + spi3_cfg_func: spi3_cfg_func { + pinctrl-single,pins = < + 0x008 0x0 /* SPI3_CLK */ + 0x0 /* SPI3_DI */ + 0x010 0x0 /* SPI3_DO */ + 0x014 0x0 /* SPI3_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + }; + + pmx7: pinmux@ff3fd800 { + compatible = "pinconf-single"; + reg = <0x0 0xff3fd800 0x0 0x18>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + sdio_clk_cfg_func: sdio_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SDIO_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA DRIVE6_MASK + >; + }; + + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SDIO_CMD */ + 0x008 0x0 /* SDIO_DATA0 */ + 0x00c 0x0 /* SDIO_DATA1 */ + 0x010 0x0 /* SDIO_DATA2 */ + 0x014 0x0 /* SDIO_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA DRIVE6_MASK + >; + }; + }; + + pmx8: pinmux@ff37e800 { + compatible = "pinconf-single"; + reg = <0x0 0xff37e800 0x0 0x18>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + sd_clk_cfg_func: sd_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SD_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA + DRIVE6_MASK + >; + }; + + sd_cfg_func: sd_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SD_CMD */ + 0x008 0x0 /* SD_DATA0 */ + 0x00c 0x0 /* SD_DATA1 */ + 0x010 0x0 /* SD_DATA2 */ + 0x014 0x0 /* SD_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA + DRIVE6_MASK + >; + }; + }; + + pmx9: pinmux@fff11800 { + compatible = "pinconf-single"; + reg = <0x0 0xfff11800 0x0 0xbc>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0x01c 0x0 /* I2C0_SCL */ + 0x020 0x0 /* I2C0_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0x024 0x0 /* I2C1_SCL */ + 0x028 0x0 /* I2C1_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2c7_cfg_func: i2c7_cfg_func { + pinctrl-single,pins = < + 0x02c 0x0 /* I2C7_SCL */ + 0x030 0x0 /* I2C7_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + slimbus_cfg_func: slimbus_cfg_func { + pinctrl-single,pins = < + 0x034 0x0 /* SLIMBUS_CLK */ + 0x038 0x0 /* SLIMBUS_DATA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2s0_cfg_func: i2s0_cfg_func { + pinctrl-single,pins = < + 0x040 0x0 /* I2S0_DI */ + 0x044 0x0 /* I2S0_DO */ + 0x048 0x0 /* I2S0_XCLK */ + 0x04c 0x0 /* I2S0_XFS */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2s2_cfg_func: i2s2_cfg_func { + pinctrl-single,pins = < + 0x050 0x0 /* I2S2_DI */ + 0x054 0x0 /* I2S2_DO */ + 0x058 0x0 /* I2S2_XCLK */ + 0x05c 0x0 /* I2S2_XFS */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + pcie_cfg_func: pcie_cfg_func { + pinctrl-single,pins = < + 0x094 0x0 /* PCIE_CLKREQ_N */ + 0x098 0x0 /* PCIE_WAKE_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + spi2_cfg_func: spi2_cfg_func { + pinctrl-single,pins = < + 0x09c 0x0 /* SPI2_CLK */ + 0x0a0 0x0 /* SPI2_DI */ + 0x0a4 0x0 /* SPI2_DO */ + 0x0a8 0x0 /* SPI2_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + usb_cfg_func: usb_cfg_func { + pinctrl-single,pins = < + 0x0ac 0x0 /* GPIO_219 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + }; + }; +}; diff --git a/include/dt-bindings/clock/hi3660-clock.h b/include/dt-bindings/clock/hi3660-clock.h new file mode 100644 index 0000000000..e1374e1809 --- /dev/null +++ b/include/dt-bindings/clock/hi3660-clock.h @@ -0,0 +1,214 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2016-2017 Linaro Ltd. + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. + */ + +#ifndef __DTS_HI3660_CLOCK_H +#define __DTS_HI3660_CLOCK_H + +/* fixed rate clocks */ +#define HI3660_CLKIN_SYS 0 +#define HI3660_CLKIN_REF 1 +#define HI3660_CLK_FLL_SRC 2 +#define HI3660_CLK_PPLL0 3 +#define HI3660_CLK_PPLL1 4 +#define HI3660_CLK_PPLL2 5 +#define HI3660_CLK_PPLL3 6 +#define HI3660_CLK_SCPLL 7 +#define HI3660_PCLK 8 +#define HI3660_CLK_UART0_DBG 9 +#define HI3660_CLK_UART6 10 +#define HI3660_OSC32K 11 +#define HI3660_OSC19M 12 +#define HI3660_CLK_480M 13 +#define HI3660_CLK_INV 14 + +/* clk in crgctrl */ +#define HI3660_FACTOR_UART3 15 +#define HI3660_CLK_FACTOR_MMC 16 +#define HI3660_CLK_GATE_I2C0 17 +#define HI3660_CLK_GATE_I2C1 18 +#define HI3660_CLK_GATE_I2C2 19 +#define HI3660_CLK_GATE_I2C6 20 +#define HI3660_CLK_DIV_SYSBUS 21 +#define HI3660_CLK_DIV_320M 22 +#define HI3660_CLK_DIV_A53 23 +#define HI3660_CLK_GATE_SPI0 24 +#define HI3660_CLK_GATE_SPI2 25 +#define HI3660_PCIEPHY_REF 26 +#define HI3660_CLK_ABB_USB 27 +#define HI3660_HCLK_GATE_SDIO0 28 +#define HI3660_HCLK_GATE_SD 29 +#define HI3660_CLK_GATE_AOMM 30 +#define HI3660_PCLK_GPIO0 31 +#define HI3660_PCLK_GPIO1 32 +#define HI3660_PCLK_GPIO2 33 +#define HI3660_PCLK_GPIO3 34 +#define HI3660_PCLK_GPIO4 35 +#define HI3660_PCLK_GPIO5 36 +#define HI3660_PCLK_GPIO6 37 +#define HI3660_PCLK_GPIO7 38 +#define HI3660_PCLK_GPIO8 39 +#define HI3660_PCLK_GPIO9 40 +#define HI3660_PCLK_GPIO10 41 +#define HI3660_PCLK_GPIO11 42 +#define HI3660_PCLK_GPIO12 43 +#define HI3660_PCLK_GPIO13 44 +#define HI3660_PCLK_GPIO14 45 +#define HI3660_PCLK_GPIO15 46 +#define HI3660_PCLK_GPIO16 47 +#define HI3660_PCLK_GPIO17 48 +#define HI3660_PCLK_GPIO18 49 +#define HI3660_PCLK_GPIO19 50 +#define HI3660_PCLK_GPIO20 51 +#define HI3660_PCLK_GPIO21 52 +#define HI3660_CLK_GATE_SPI3 53 +#define HI3660_CLK_GATE_I2C7 54 +#define HI3660_CLK_GATE_I2C3 55 +#define HI3660_CLK_GATE_SPI1 56 +#define HI3660_CLK_GATE_UART1 57 +#define HI3660_CLK_GATE_UART2 58 +#define HI3660_CLK_GATE_UART4 59 +#define HI3660_CLK_GATE_UART5 60 +#define HI3660_CLK_GATE_I2C4 61 +#define HI3660_CLK_GATE_DMAC 62 +#define HI3660_PCLK_GATE_DSS 63 +#define HI3660_ACLK_GATE_DSS 64 +#define HI3660_CLK_GATE_LDI1 65 +#define HI3660_CLK_GATE_LDI0 66 +#define HI3660_CLK_GATE_VIVOBUS 67 +#define HI3660_CLK_GATE_EDC0 68 +#define HI3660_CLK_GATE_TXDPHY0_CFG 69 +#define HI3660_CLK_GATE_TXDPHY0_REF 70 +#define HI3660_CLK_GATE_TXDPHY1_CFG 71 +#define HI3660_CLK_GATE_TXDPHY1_REF 72 +#define HI3660_ACLK_GATE_USB3OTG 73 +#define HI3660_CLK_GATE_SPI4 74 +#define HI3660_CLK_GATE_SD 75 +#define HI3660_CLK_GATE_SDIO0 76 +#define HI3660_CLK_GATE_UFS_SUBSYS 77 +#define HI3660_PCLK_GATE_DSI0 78 +#define HI3660_PCLK_GATE_DSI1 79 +#define HI3660_ACLK_GATE_PCIE 80 +#define HI3660_PCLK_GATE_PCIE_SYS 81 +#define HI3660_CLK_GATE_PCIEAUX 82 +#define HI3660_PCLK_GATE_PCIE_PHY 83 +#define HI3660_CLK_ANDGT_LDI0 84 +#define HI3660_CLK_ANDGT_LDI1 85 +#define HI3660_CLK_ANDGT_EDC0 86 +#define HI3660_CLK_GATE_UFSPHY_GT 87 +#define HI3660_CLK_ANDGT_MMC 88 +#define HI3660_CLK_ANDGT_SD 89 +#define HI3660_CLK_A53HPM_ANDGT 90 +#define HI3660_CLK_ANDGT_SDIO 91 +#define HI3660_CLK_ANDGT_UART0 92 +#define HI3660_CLK_ANDGT_UART1 93 +#define HI3660_CLK_ANDGT_UARTH 94 +#define HI3660_CLK_ANDGT_SPI 95 +#define HI3660_CLK_VIVOBUS_ANDGT 96 +#define HI3660_CLK_AOMM_ANDGT 97 +#define HI3660_CLK_320M_PLL_GT 98 +#define HI3660_AUTODIV_EMMC0BUS 99 +#define HI3660_AUTODIV_SYSBUS 100 +#define HI3660_CLK_GATE_UFSPHY_CFG 101 +#define HI3660_CLK_GATE_UFSIO_REF 102 +#define HI3660_CLK_MUX_SYSBUS 103 +#define HI3660_CLK_MUX_UART0 104 +#define HI3660_CLK_MUX_UART1 105 +#define HI3660_CLK_MUX_UARTH 106 +#define HI3660_CLK_MUX_SPI 107 +#define HI3660_CLK_MUX_I2C 108 +#define HI3660_CLK_MUX_MMC_PLL 109 +#define HI3660_CLK_MUX_LDI1 110 +#define HI3660_CLK_MUX_LDI0 111 +#define HI3660_CLK_MUX_SD_PLL 112 +#define HI3660_CLK_MUX_SD_SYS 113 +#define HI3660_CLK_MUX_EDC0 114 +#define HI3660_CLK_MUX_SDIO_SYS 115 +#define HI3660_CLK_MUX_SDIO_PLL 116 +#define HI3660_CLK_MUX_VIVOBUS 117 +#define HI3660_CLK_MUX_A53HPM 118 +#define HI3660_CLK_MUX_320M 119 +#define HI3660_CLK_MUX_IOPERI 120 +#define HI3660_CLK_DIV_UART0 121 +#define HI3660_CLK_DIV_UART1 122 +#define HI3660_CLK_DIV_UARTH 123 +#define HI3660_CLK_DIV_MMC 124 +#define HI3660_CLK_DIV_SD 125 +#define HI3660_CLK_DIV_EDC0 126 +#define HI3660_CLK_DIV_LDI0 127 +#define HI3660_CLK_DIV_SDIO 128 +#define HI3660_CLK_DIV_LDI1 129 +#define HI3660_CLK_DIV_SPI 130 +#define HI3660_CLK_DIV_VIVOBUS 131 +#define HI3660_CLK_DIV_I2C 132 +#define HI3660_CLK_DIV_UFSPHY 133 +#define HI3660_CLK_DIV_CFGBUS 134 +#define HI3660_CLK_DIV_MMC0BUS 135 +#define HI3660_CLK_DIV_MMC1BUS 136 +#define HI3660_CLK_DIV_UFSPERI 137 +#define HI3660_CLK_DIV_AOMM 138 +#define HI3660_CLK_DIV_IOPERI 139 +#define HI3660_VENC_VOLT_HOLD 140 +#define HI3660_PERI_VOLT_HOLD 141 +#define HI3660_CLK_GATE_VENC 142 +#define HI3660_CLK_GATE_VDEC 143 +#define HI3660_CLK_ANDGT_VENC 144 +#define HI3660_CLK_ANDGT_VDEC 145 +#define HI3660_CLK_MUX_VENC 146 +#define HI3660_CLK_MUX_VDEC 147 +#define HI3660_CLK_DIV_VENC 148 +#define HI3660_CLK_DIV_VDEC 149 +#define HI3660_CLK_FAC_ISP_SNCLK 150 +#define HI3660_CLK_GATE_ISP_SNCLK0 151 +#define HI3660_CLK_GATE_ISP_SNCLK1 152 +#define HI3660_CLK_GATE_ISP_SNCLK2 153 +#define HI3660_CLK_ANGT_ISP_SNCLK 154 +#define HI3660_CLK_MUX_ISP_SNCLK 155 +#define HI3660_CLK_DIV_ISP_SNCLK 156 + +/* clk in pmuctrl */ +#define HI3660_GATE_ABB_192 0 + +/* clk in pctrl */ +#define HI3660_GATE_UFS_TCXO_EN 0 +#define HI3660_GATE_USB_TCXO_EN 1 + +/* clk in sctrl */ +#define HI3660_PCLK_AO_GPIO0 0 +#define HI3660_PCLK_AO_GPIO1 1 +#define HI3660_PCLK_AO_GPIO2 2 +#define HI3660_PCLK_AO_GPIO3 3 +#define HI3660_PCLK_AO_GPIO4 4 +#define HI3660_PCLK_AO_GPIO5 5 +#define HI3660_PCLK_AO_GPIO6 6 +#define HI3660_PCLK_GATE_MMBUF 7 +#define HI3660_CLK_GATE_DSS_AXI_MM 8 +#define HI3660_PCLK_MMBUF_ANDGT 9 +#define HI3660_CLK_MMBUF_PLL_ANDGT 10 +#define HI3660_CLK_FLL_MMBUF_ANDGT 11 +#define HI3660_CLK_SYS_MMBUF_ANDGT 12 +#define HI3660_CLK_GATE_PCIEPHY_GT 13 +#define HI3660_ACLK_MUX_MMBUF 14 +#define HI3660_CLK_SW_MMBUF 15 +#define HI3660_CLK_DIV_AOBUS 16 +#define HI3660_PCLK_DIV_MMBUF 17 +#define HI3660_ACLK_DIV_MMBUF 18 +#define HI3660_CLK_DIV_PCIEPHY 19 + +/* clk in iomcu */ +#define HI3660_CLK_I2C0_IOMCU 0 +#define HI3660_CLK_I2C1_IOMCU 1 +#define HI3660_CLK_I2C2_IOMCU 2 +#define HI3660_CLK_I2C6_IOMCU 3 +#define HI3660_CLK_IOMCU_PERI0 4 + +/* clk in stub clock */ +#define HI3660_CLK_STUB_CLUSTER0 0 +#define HI3660_CLK_STUB_CLUSTER1 1 +#define HI3660_CLK_STUB_GPU 2 +#define HI3660_CLK_STUB_DDR 3 +#define HI3660_CLK_STUB_NUM 4 + +#endif /* __DTS_HI3660_CLOCK_H */

This commit adds devicetree for Hikey960 board. Most of the contents are copied from Linux kernel with some modifications for u-boot. To be more precise, SD card's speed related properties are removed due to a bug in u-boot clock implementation. Hence forcing the SD controller to work in standard speed.

Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org --- arch/arm/dts/Makefile | 1 + arch/arm/dts/hi3660-hikey960-u-boot.dtsi | 10 + arch/arm/dts/hi3660-hikey960.dts | 607 +++++++++++++++++++++++ 3 files changed, 618 insertions(+) create mode 100644 arch/arm/dts/hi3660-hikey960-u-boot.dtsi create mode 100644 arch/arm/dts/hi3660-hikey960.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f5535078c7..8dfc1f033c 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ exynos4412-odroid.dtb

dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb +dtb-$(CONFIG_TARGET_HIKEY960) += hi3660-hikey960.dtb

dtb-$(CONFIG_TARGET_POPLAR) += hi3798cv200-poplar.dtb

diff --git a/arch/arm/dts/hi3660-hikey960-u-boot.dtsi b/arch/arm/dts/hi3660-hikey960-u-boot.dtsi new file mode 100644 index 0000000000..648c77f8c5 --- /dev/null +++ b/arch/arm/dts/hi3660-hikey960-u-boot.dtsi @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * U-Boot additions + * + * Copyright (c) 2019 Linaro Ltd. + */ + +&dwmmc1 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/hi3660-hikey960.dts b/arch/arm/dts/hi3660-hikey960.dts new file mode 100644 index 0000000000..9fbfb422c8 --- /dev/null +++ b/arch/arm/dts/hi3660-hikey960.dts @@ -0,0 +1,607 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon HiKey960 Development Board + * + * Copyright (C) 2016, Hisilicon Ltd. + * + */ + +/dts-v1/; + +#include "hi3660.dtsi" +#include "hikey960-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "HiKey960"; + compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660"; + + aliases { + mshc1 = &dwmmc1; + mshc2 = &dwmmc2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + }; + + chosen { + stdout-path = "serial6:115200n8"; + }; + + memory@0 { + device_type = "memory"; + /* rewrite this at bootloader */ + reg = <0x0 0x0 0x0 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@32000000 { + compatible = "ramoops"; + reg = <0x0 0x32000000 0x0 0x00100000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; + }; + }; + + reboot-mode-syscon@32100000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x32100000 0x0 0x00001000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x0>; + + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>; + + power { + wakeup-source; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led1 { + label = "green:user1"; + /* gpio_150_user_led1 */ + gpios = <&gpio18 6 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "green:user2"; + /* gpio_151_user_led2 */ + gpios = <&gpio18 7 0>; + linux,default-trigger = "none"; + }; + + user_led3 { + label = "green:user3"; + /* gpio_189_user_led3 */ + gpios = <&gpio23 5 0>; + linux,default-trigger = "mmc0"; + }; + + user_led4 { + label = "green:user4"; + /* gpio_190_user_led4 */ + gpios = <&gpio23 6 0>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan_active_led { + label = "yellow:wlan"; + /* gpio_205_wifi_active */ + gpios = <&gpio25 5 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "blue:bt"; + gpios = <&gpio25 7 0>; + /* gpio_207_user_led1 */ + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + pmic: pmic@fff34000 { + compatible = "hisilicon,hi6421v530-pmic"; + reg = <0x0 0xfff34000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + ldo3: LDO3 { /* HDMI */ + regulator-name = "VOUT3_1V85"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo9: LDO9 { /* SDCARD I/O */ + regulator-name = "VOUT9_1V8_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + ldo11: LDO11 { /* Low Speed Connector */ + regulator-name = "VOUT11_1V8_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + ldo15: LDO15 { /* UFS VCC */ + regulator-name = "VOUT15_3V0"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo16: LDO16 { /* SD VDD */ + regulator-name = "VOUT16_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + }; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* GPIO_051_WIFI_EN */ + gpio = <&gpio6 3 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +/* + * Legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * "" = no idea, schematic doesn't say, could be + * unrouted (not connected to any external pin) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from "HiKey 960 Board ver A" schematics + * from Huawei. The 40 pin low speed expansion connector is named + * J2002 63453-140LF. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ +&gpio0 { + /* GPIO_000-GPIO_007 */ + gpio-line-names = + "", + "TP901", /* TEST_MODE connected to TP901 */ + "[PMU0_SSI]", + "[PMU1_SSI]", + "[PMU2_SSI]", + "[PMU0_CLKOUT]", + "[JTAG_TCK]", + "[JTAG_TMS]"; +}; + +&gpio1 { + /* GPIO_008-GPIO_015 */ + gpio-line-names = + "[JTAG_TRST_N]", + "[JTAG_TDI]", + "[JTAG_TDO]", + "NC", "NC", + "[I2C3_SCL]", + "[I2C3_SDA]", + "NC"; +}; + +&gpio2 { + /* GPIO_016-GPIO_023 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO-J", /* LSEC pin 32: GPIO_019 */ + "GPIO_020_HDMI_SEL", + "GPIO-L", /* LSEC pin 34: GPIO_021 */ + "GPIO_022_UFSBUCK_INT_N", + "GPIO-G"; /* LSEC pin 29: LCD_TE0 */ +}; + +&gpio3 { + /* GPIO_024-GPIO_031 */ + /* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */ + gpio-line-names = + "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */ + "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */ + "NC", + "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */ + "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */ + "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */ + "[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */ + "NC"; +}; + +&gpio4 { + /* GPIO_032-GPIO_039 */ + gpio-line-names = + "NC", "NC", + "PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */ + "GPIO_035_PMU2_EN", + "GPIO_036_USB_HUB_RESET", + "NC", "NC", "NC"; +}; + +&gpio5 { + /* GPIO_040-GPIO_047 */ + gpio-line-names = + "GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */ + "GPIO_041_HDMI_PD", + "TP904", /* Test point */ + "TP905", /* Test point */ + "NC", "NC", + "GPIO_046_HUB_VDD33_EN", + "GPIO_047_PMU1_EN"; +}; + +&gpio6 { + /* GPIO_048-GPIO_055 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO_051_WIFI_EN", + "GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */ + /* + * These two pins should be used for SD(IO) data according to the + * 96boards specification but seems to be repurposed for a IRDA UART. + * They are however named according to the spec. + */ + "[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */ + "[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */ + "[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */ +}; + +&gpio7 { + /* GPIO_056-GPIO_063 */ + gpio-line-names = + "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */ + "[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */ + "[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */ + "[UART0_RXD]", /* LSEC pin 7: UART3_RXD */ + "[UART0_TXD]", /* LSEC pin 5: UART3_TXD */ + "[SOC_BT_UART4_CTS_N]", + "[SOC_BT_UART4_RTS_N]", + "[SOC_BT_UART4_RXD]"; +}; + +&gpio8 { + /* GPIO_064-GPIO_071 */ + gpio-line-names = + "[SOC_BT_UART4_TXD]", + "NC", + "[PMU_HKADC_SSI]", + "NC", + "GPIO_068_SEL", + "NC", "NC", "NC"; + +}; + +&gpio9 { + /* GPIO_072-GPIO_079 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */ + "NC", "NC", "NC", "NC"; +}; + +&gpio10 { + /* GPIO_080-GPIO_087 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio11 { + /* GPIO_088-GPIO_095 */ + gpio-line-names = + "NC", + "[PCIE_PERST_N]", + "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio12 { + /* GPIO_096-GPIO_103 */ + gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC"; +}; + +&gpio13 { + /* GPIO_104-GPIO_111 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio14 { + /* GPIO_112-GPIO_119 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio15 { + /* GPIO_120-GPIO_127 */ + gpio-line-names = + "NC", "NC", "NC", "NC", "NC", "NC", + "GPIO_126_BT_EN", + "TP902"; /* GPIO_127_JTAG_SEL0 */ +}; + +&gpio16 { + /* GPIO_128-GPIO_135 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio17 { + /* GPIO_136-GPIO_143 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio18 { + /* GPIO_144-GPIO_151 */ + gpio-line-names = + "[UFS_REF_CLK]", + "[UFS_RST_N]", + "[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */ + "[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */ + "[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */ + "[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */ + "GPIO_150_USER_LED1", + "GPIO_151_USER_LED2"; +}; + +&gpio19 { + /* GPIO_152-GPIO_159 */ + gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", ""; +}; + +&gpio20 { + /* GPIO_160-GPIO_167 */ + gpio-line-names = + "[SD_CLK]", + "[SD_CMD]", + "[SD_DATA0]", + "[SD_DATA1]", + "[SD_DATA2]", + "[SD_DATA3]", + "", ""; +}; + +&gpio21 { + /* GPIO_168-GPIO_175 */ + gpio-line-names = + "[WL_SDIO_CLK]", + "[WL_SDIO_CMD]", + "[WL_SDIO_DATA0]", + "[WL_SDIO_DATA1]", + "[WL_SDIO_DATA2]", + "[WL_SDIO_DATA3]", + "", ""; +}; + +&gpio22 { + /* GPIO_176-GPIO_183 */ + gpio-line-names = + "[GPIO_176_PMU_PWR_HOLD]", + "NA", + "[SYSCLK_EN]", + "GPIO_179_WL_WAKEUP_AP", + "GPIO_180_HDMI_INT", + "NA", + "GPIO-F", /* LSEC pin 28: LCD_BL_PWM */ + "[I2C0_SCL]"; /* LSEC pin 15 */ +}; + +&gpio23 { + /* GPIO_184-GPIO_191 */ + gpio-line-names = + "[I2C0_SDA]", /* LSEC pin 17 */ + "[I2C1_SCL]", /* Actual SoC I2C1 */ + "[I2C1_SDA]", /* Actual SoC I2C1 */ + "[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */ + "[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */ + "GPIO_189_USER_LED3", + "GPIO_190_USER_LED4", + ""; +}; + +&gpio24 { + /* GPIO_192-GPIO_199 */ + gpio-line-names = + "[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */ + "[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */ + "[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */ + "[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */ + "[GPIO_196_I2S2_DI]", + "[GPIO_197_I2S2_DO]", + "[GPIO_198_I2S2_XCLK]", + "[GPIO_199_I2S2_XFS]"; +}; + +&gpio25 { + /* GPIO_200-GPIO_207 */ + gpio-line-names = + "NC", + "NC", + "GPIO_202_VBUS_TYPEC", + "GPIO_203_SD_DET", + "GPIO_204_PMU12_IRQ_N", + "GPIO_205_WIFI_ACTIVE", + "GPIO_206_USBSW_SEL", + "GPIO_207_BT_ACTIVE"; +}; + +&gpio26 { + /* GPIO_208-GPIO_215 */ + gpio-line-names = + "GPIO-A", /* LSEC pin 23: GPIO_208 */ + "GPIO-B", /* LSEC pin 24: GPIO_209 */ + "GPIO-C", /* LSEC pin 25: GPIO_210 */ + "GPIO-D", /* LSEC pin 26: GPIO_211 */ + "GPIO-E", /* LSEC pin 27: GPIO_212 */ + "[PCIE_CLKREQ_N]", + "[PCIE_WAKE_N]", + "[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */ +}; + +&gpio27 { + /* GPIO_216-GPIO_223 */ + gpio-line-names = + "[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */ + "[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */ + "[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */ + "GPIO_219_CC_INT", + "NC", + "NC", + "[PMU_INT]", + ""; +}; + +&gpio28 { + /* GPIO_224-GPIO_231 */ + gpio-line-names = + "", "", "", "", "", "", "", ""; +}; + +&i2c0 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + adv7533: adv7533@39 { + status = "ok"; + compatible = "adi,adv7533"; + reg = <0x39>; + }; +}; + +&uart3 { + /* On Low speed expansion */ + label = "LS-UART0"; + status = "okay"; +}; + +&uart4 { + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + }; +}; + +&i2c7 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&uart6 { + /* On Low speed expansion */ + label = "LS-UART1"; + status = "okay"; +}; + +&spi2 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&spi3 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&dwmmc1 { + cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_func + &sd_clk_cfg_func + &sd_cfg_func>; + vmmc-supply = <&ldo16>; + vqmmc-supply = <&ldo9>; + status = "okay"; +}; + +&dwmmc2 { /* WIFI */ + bus-width = <0x4>; + non-removable; + broken-cd; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pmx_func + &sdio_clk_cfg_func + &sdio_cfg_func>; + /* WL_EN */ + vmmc-supply = <&wlan_en>; + status = "ok"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */ + interrupt-parent = <&gpio22>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; +};

This commit adds board support for Hikey960 board from Hisilicon. This board is one of the Consumer Edition boards of the 96Boards family powered by Kirin960 SoC.

More information about this board can be found in 96Boards website: https://www.96boards.org/product/hikey960/

The initial supported/tested devices include: - Debug serial - SD

With these support, it's good enough for loading Linux Kernel from SD.

Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org --- arch/arm/Kconfig | 13 ++ arch/arm/include/asm/arch-hi3660/hi3660.h | 52 +++++ board/hisilicon/hikey960/Kconfig | 15 ++ board/hisilicon/hikey960/MAINTAINERS | 6 + board/hisilicon/hikey960/Makefile | 3 + board/hisilicon/hikey960/README | 247 ++++++++++++++++++++++ board/hisilicon/hikey960/hikey960.c | 186 ++++++++++++++++ configs/hikey960_defconfig | 30 +++ include/configs/hikey960.h | 60 ++++++ 9 files changed, 612 insertions(+) create mode 100644 arch/arm/include/asm/arch-hi3660/hi3660.h create mode 100644 board/hisilicon/hikey960/Kconfig create mode 100644 board/hisilicon/hikey960/MAINTAINERS create mode 100644 board/hisilicon/hikey960/Makefile create mode 100644 board/hisilicon/hikey960/README create mode 100644 board/hisilicon/hikey960/hikey960.c create mode 100644 configs/hikey960_defconfig create mode 100644 include/configs/hikey960.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 51d4acedac..95807b0576 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1205,6 +1205,18 @@ config TARGET_HIKEY Support for HiKey 96boards platform. It features a HI6220 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.

+config TARGET_HIKEY960 + bool "Support HiKey960 96boards Consumer Edition Platform" + select ARM64 + select DM + select DM_SERIAL + select OF_CONTROL + select PL01X_SERIAL + imply CMD_DM + help + Support for HiKey960 96boards platform. It features a HI3660 + SoC, with 4xA73 CPU, 4xA53 CPU, MALI-G71 GPU, and 3GB RAM. + config TARGET_POPLAR bool "Support Poplar 96boards Enterprise Edition Platform" select ARM64 @@ -1760,6 +1772,7 @@ source "board/grinn/chiliboard/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" source "board/hisilicon/hikey/Kconfig" +source "board/hisilicon/hikey960/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" source "board/phytec/pcm051/Kconfig" diff --git a/arch/arm/include/asm/arch-hi3660/hi3660.h b/arch/arm/include/asm/arch-hi3660/hi3660.h new file mode 100644 index 0000000000..3ca0951543 --- /dev/null +++ b/arch/arm/include/asm/arch-hi3660/hi3660.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2019 Linaro + * Author: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org + */ + +#ifndef __HI3660_H__ +#define __HI3660_H__ + +#define HI3660_UART6_BASE 0xfff32000 + +#define PMU_REG_BASE 0xfff34000 +#define PMIC_HARDWARE_CTRL0 (PMU_REG_BASE + (0x0C5 << 2)) + +#define SCTRL_REG_BASE 0xfff0a000 +#define SCTRL_SCFPLLCTRL0 (SCTRL_REG_BASE + 0x120) +#define SCTRL_SCFPLLCTRL0_FPLL0_EN BIT(0) + +#define CRG_REG_BASE 0xfff35000 +#define CRG_PEREN2 (CRG_REG_BASE + 0x020) +#define CRG_PERDIS2 (CRG_REG_BASE + 0x024) +#define CRG_PERCLKEN2 (CRG_REG_BASE + 0x028) +#define CRG_PERSTAT2 (CRG_REG_BASE + 0x02C) +#define CRG_PEREN4 (CRG_REG_BASE + 0x040) +#define CRG_PERDIS4 (CRG_REG_BASE + 0x044) +#define CRG_PERCLKEN4 (CRG_REG_BASE + 0x048) +#define CRG_PERSTAT4 (CRG_REG_BASE + 0x04C) +#define CRG_PERRSTEN2 (CRG_REG_BASE + 0x078) +#define CRG_PERRSTDIS2 (CRG_REG_BASE + 0x07C) +#define CRG_PERRSTSTAT2 (CRG_REG_BASE + 0x080) +#define CRG_PERRSTEN3 (CRG_REG_BASE + 0x084) +#define CRG_PERRSTDIS3 (CRG_REG_BASE + 0x088) +#define CRG_PERRSTSTAT3 (CRG_REG_BASE + 0x08C) +#define CRG_PERRSTEN4 (CRG_REG_BASE + 0x090) +#define CRG_PERRSTDIS4 (CRG_REG_BASE + 0x094) +#define CRG_PERRSTSTAT4 (CRG_REG_BASE + 0x098) +#define CRG_ISOEN (CRG_REG_BASE + 0x144) +#define CRG_ISODIS (CRG_REG_BASE + 0x148) +#define CRG_ISOSTAT (CRG_REG_BASE + 0x14C) + +#define PINMUX4_BASE 0xfff11000 +#define PINMUX4_SDDET (PINMUX4_BASE + 0x60) + +#define PINCONF3_BASE 0xff37e800 +#define PINCONF3_SDCLK (PINCONF3_BASE + 0x00) +#define PINCONF3_SDCMD (PINCONF3_BASE + 0x04) +#define PINCONF3_SDDATA0 (PINCONF3_BASE + 0x08) +#define PINCONF3_SDDATA1 (PINCONF3_BASE + 0x0c) +#define PINCONF3_SDDATA2 (PINCONF3_BASE + 0x10) +#define PINCONF3_SDDATA3 (PINCONF3_BASE + 0x14) + +#endif /*__HI3660_H__*/ diff --git a/board/hisilicon/hikey960/Kconfig b/board/hisilicon/hikey960/Kconfig new file mode 100644 index 0000000000..89f096d649 --- /dev/null +++ b/board/hisilicon/hikey960/Kconfig @@ -0,0 +1,15 @@ +if TARGET_HIKEY960 + +config SYS_BOARD + default "hikey960" + +config SYS_VENDOR + default "hisilicon" + +config SYS_SOC + default "hi3660" + +config SYS_CONFIG_NAME + default "hikey960" + +endif diff --git a/board/hisilicon/hikey960/MAINTAINERS b/board/hisilicon/hikey960/MAINTAINERS new file mode 100644 index 0000000000..2c98932163 --- /dev/null +++ b/board/hisilicon/hikey960/MAINTAINERS @@ -0,0 +1,6 @@ +HIKEY960 BOARD +M: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org +S: Maintained +F: board/hisilicon/hikey960 +F: include/configs/hikey960.h +F: configs/hikey960_defconfig diff --git a/board/hisilicon/hikey960/Makefile b/board/hisilicon/hikey960/Makefile new file mode 100644 index 0000000000..ea5a70921f --- /dev/null +++ b/board/hisilicon/hikey960/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y := hikey960.o diff --git a/board/hisilicon/hikey960/README b/board/hisilicon/hikey960/README new file mode 100644 index 0000000000..e1e330d535 --- /dev/null +++ b/board/hisilicon/hikey960/README @@ -0,0 +1,247 @@ +Introduction +============ + +HiKey960 is one of the 96Boards Consumer Edition board from HiSilicon. +The board/SoC has: - +* HiSilicon Kirin960 (HI3660) SoC with 4xCortex-A73 and 4xCortex-A53 +* ARM Mali G71 MP8 GPU +* 3GB LPDDR4 SDRAM +* 32GB UFS Flash Storage +* microSD +* 802.11a/b/g/n WiFi, Bluetooth + +More information about this board can be found in 96Boards website: +https://www.96boards.org/product/hikey960/ + +Currently the u-boot port supports: - +* SD card + +Compile from source +=================== + +First get all the sources + + > mkdir -p ~/hikey960/src ~/hikey960/bin + > cd ~/hikey960/src + > git clone https://github.com/ARM-software/arm-trusted-firmware + > git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4 + > git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2 + > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-stag... + > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-stag... + > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-stag... + > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-stag... + > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-stag... + > wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-stag... + +Get the SCP_BL2 lpm3.img binary. It is shipped as part of the UEFI source. +The latest version can be obtained from the OpenPlatformPkg repo. + + > cp OpenPlatformPkg/Platforms/Hisilicon/HiKey960/Binary/lpm3.img ~/hikey960/bin/ + +Compile U-Boot +============== + + > cd ~/hikey960/src/u-boot + > make CROSS_COMPILE=aarch64-linux-gnu- hikey960_defconfig + > make CROSS_COMPILE=aarch64-linux-gnu- + > cp u-boot.bin ~/hikey960/bin/ + +Compile ARM Trusted Firmware (ATF) +================================== + + > cd ~/hikey960/src/arm-trusted-firmware + > make CROSS_COMPILE=aarch64-linux-gnu- all fip \ + SCP_BL2=~/hikey960/bin/lpm3.img \ + BL33=~/hikey960/bin/u-boot.bin DEBUG=1 PLAT=hikey960 + +Copy the resulting FIP binary + > cp build/hikey960/debug/fip.bin ~/hikey960/bin + +Compile l-loader +================ + > cd ~/hikey960/src/l-loader + > ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl1.bin + > ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl2.bin + > ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/fip.bin + > ln -sf ~/hikey960/bin/u-boot.bin + > make hikey960 PTABLE_LST=linux-32g NS_BL1U=u-boot.bin + +Copy the resulting binaries + > cp *.img ~/hikey960/bin + > cp l-loader.bin ~/hikey960/bin + +These instructions are adapted from +https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/h... + +Setup Console +============= + +Install ser2net. Use telnet as the console since UEFI in recovery mode +output window fails to display in minicom. + + > sudo apt-get install ser2net + +Configure ser2net + + > sudo vi /etc/ser2net.conf + +Append one line for serial-over-USB in #ser2net.conf + + > 2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner + +Start ser2net + + > sudo killall ser2net + > sudo ser2net -u + +Open the console. + + > telnet localhost 2004 + +And you could open the console remotely, too. + +Flashing +======== + +1. Boot Hikey960 into recovery mode as per the below document: +https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey96... + +Once Hikey960 is in recovery mode, flash the recovery binary: + + > cd ~/hikey960/src + > chmod +x ./hikey_idt + > sudo ./hikey_idt -c config -p /dev/ttyUSB1 + +Now move to the Hikey960 console and press `f` during UEFI boot. This +will allow the board to boot into fastboot mode. Once the board is in +fastboot mode, you should see the ID of the HiKey960 board using the +following command + + > sudo fastboot devices + +1ED3822A018E3372 fastboot + +3. Flash the images + +Now, the images can be flashed using fastboot: + + > sudo fastboot flash ptable ~/hikey960/bin/prm_ptable.img + > sudo fastboot flash xloader ~/hikey960/bin/sec_xloader.img + > sudo fastboot flash fastboot ~/hikey960/bin/l-loader.bin + > sudo fastboot flash fip ~/hikey960/bin/fip.bin + +4. Set the "Boot Mode" switch to OFF position for normal boot mode. +Then power on HiKey960 + +Observe the console traces using UART6 on the Low Speed Expansion header: + +NOTICE: BL2: v2.1(debug):v2.1-531-g3ee48f40 +NOTICE: BL2: Built : 18:15:58, Aug 2 2019 +INFO: BL2: Doing platform setup +INFO: UFS LUN0 contains 1024 blocks with 4096-byte size +INFO: UFS LUN1 contains 1024 blocks with 4096-byte size +INFO: UFS LUN2 contains 2048 blocks with 4096-byte size +INFO: UFS LUN3 contains 7805952 blocks with 4096-byte size +INFO: ufs: change power mode success +INFO: BL2: Loading image id 2 +INFO: Loading image id=2 at address 0x89c80000 +INFO: Image id=2 loaded: 0x89c80000 - 0x89cb5088 +INFO: BL2: Initiating SCP_BL2 transfer to SCP +INFO: BL2: SCP_BL2: 0x89c80000@0x35088 +INFO: BL2: SCP_BL2 HEAD: +INFO: BL2: SCP_BL2 0x7000 0x179 0x159 0x149 +INFO: BL2: SCP_BL2 0x189 0x18b 0x18d 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x18f +INFO: BL2: SCP_BL2 0x191 0x0 0x193 0x195 +INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd +INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd +INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd +INFO: BL2: SCP_BL2 0x4d454355 0x43494741 0x424d554e 0x21215245 +INFO: BL2: SCP_BL2 0x4a054904 0x42912000 0xf841bfbc 0xe7fa0b04 +INFO: BL2: SCP_BL2 0xb88cf000 0x3b18 0x3d1c 0x6809493e +INFO: BL2: SCP_BL2 0x4613680a 0x201f102 0xf0002a04 0x600a804c +INFO: BL2: SCP_BL2 0x204f04f 0xf203fb02 0xf102440a 0x60100204 +INFO: BL2: SCP_BL2 0x160f04f 0xf103fb01 0x68004834 0x61044408 +INFO: BL2: SCP_BL2 0x61866145 0xf8c061c7 0xf8c08020 0xf8c09024 +INFO: BL2: SCP_BL2 0xf8c0a028 0xf3efb02c 0xf3ef8208 0x68118309 +INFO: BL2: SCP_BL2 0xf1026401 0xf0110204 0xbf070f04 0x46113220 +INFO: BL2: SCP_BL2 TAIL: +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x19cad151 0x19b80040 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0 +INFO: BL2: SCP_BL2 transferred to SCP +INFO: start fw loading +INFO: fw load success +WARNING: BL2: Platform setup already done!! +INFO: BL2: Loading image id 3 +INFO: Loading image id=3 at address 0x1ac58000 +INFO: Image id=3 loaded: 0x1ac58000 - 0x1ac63024 +INFO: BL2: Loading image id 5 +INFO: Loading image id=5 at address 0x1ac98000 +INFO: Image id=5 loaded: 0x1ac98000 - 0x1ad0819c +NOTICE: BL2: Booting BL31 +INFO: Entry point address = 0x1ac58000 +INFO: SPSR = 0x3cd +NOTICE: BL31: v2.1(debug):v2.1-531-g3ee48f40 +NOTICE: BL31: Built : 18:16:01, Aug 2 2019 +INFO: ARM GICv2 driver initialized +INFO: BL31: Initializing runtime services +INFO: BL31: cortex_a53: CPU workaround for 855873 was applied +INFO: plat_setup_psci_ops: sec_entrypoint=0x1ac580fc +INFO: BL31: Preparing for EL3 exit to normal world +INFO: Entry point address = 0x1ac98000 +INFO: SPSR = 0x3c9 + + +U-Boot 2019.07-00628-g286f05a6fc-dirty (Aug 02 2019 - 17:14:05 +0530) +Hikey960 + +DRAM: 3 GiB +PSCI: v1.1 +MMC: dwmmc1@ff37f000: 0 +Loading Environment from EXT4... ** File not found /uboot.env ** + +** Unable to read "/uboot.env" from mmc0:2 ** +In: serial@fff32000 +Out: serial@fff32000 +Err: serial@fff32000 +Net: Net Initialization Skipped +No ethernet found. +Hit any key to stop autoboot: 0 +switch to partitions #0, OK +mmc0 is current device +Scanning mmc 0:1... +Found /extlinux/extlinux.conf +Retrieving file: /extlinux/extlinux.conf +201 bytes read in 12 ms (15.6 KiB/s) +1: hikey960-kernel +Retrieving file: /Image +24689152 bytes read in 4377 ms (5.4 MiB/s) +append: earlycon=pl011,mmio32,0xfff32000 console=ttyAMA6,115200 rw root=/dev/mmcblk0p2 rot +Retrieving file: /hi3660-hikey960.dtb +35047 bytes read in 14 ms (2.4 MiB/s) +## Flattened Device Tree blob at 10000000 + Booting using the fdt blob at 0x10000000 + Using Device Tree in place at 0000000010000000, end 000000001000b8e6 + +Starting kernel ... + +[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] +[ 0.000000] Linux version 5.2.0-03138-gd75da80dce39 (mani@Mani-XPS-13-9360) (gcc versi9 +[ 0.000000] Machine model: HiKey960 +[ 0.000000] earlycon: pl11 at MMIO32 0x00000000fff32000 (options '') +[ 0.000000] printk: bootconsole [pl11] enabled +[ 0.000000] efi: Getting EFI parameters from FDT: diff --git a/board/hisilicon/hikey960/hikey960.c b/board/hisilicon/hikey960/hikey960.c new file mode 100644 index 0000000000..eb9b99eaa9 --- /dev/null +++ b/board/hisilicon/hikey960/hikey960.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Linaro + * Author: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/hi3660.h> +#include <asm/armv8/mmu.h> +#include <asm/psci.h> +#include <linux/arm-smccc.h> +#include <linux/psci.h> + +#define PMIC_REG_TO_BUS_ADDR(x) (x << 2) +#define PMIC_VSEL_MASK 0x7 + +DECLARE_GLOBAL_DATA_PTR; + +#if !CONFIG_IS_ENABLED(OF_CONTROL) +#include <dm/platform_data/serial_pl01x.h> + +static const struct pl01x_serial_platdata serial_platdata = { + .base = HI3660_UART6_BASE, + .type = TYPE_PL011, + .clock = 19200000 +}; + +U_BOOT_DEVICE(hikey960_serial0) = { + .name = "serial_pl01x", + .platdata = &serial_platdata, +}; +#endif + +static struct mm_region hikey_mem_map[] = { + { + .virt = 0x0UL, /* DDR */ + .phys = 0x0UL, + .size = 0xC0000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + .virt = 0xE0000000UL, /* Peripheral block */ + .phys = 0xE0000000UL, + .size = 0x20000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = hikey_mem_map; + +int board_early_init_f(void) +{ + return 0; +} + +int misc_init_r(void) +{ + return 0; +} + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = gd->ram_size; + + return 0; +} + +void hikey960_sd_init(void) +{ + u32 data; + + /* Enable FPLL0 */ + data = readl(SCTRL_SCFPLLCTRL0); + data |= SCTRL_SCFPLLCTRL0_FPLL0_EN; + writel(data, SCTRL_SCFPLLCTRL0); + + /* Configure LDO16 */ + data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x79)) & + PMIC_VSEL_MASK; + data |= 6; + writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x79)); + + data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x78)); + data |= 2; + writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x78)); + + udelay(100); + + /* Configure LDO9 */ + data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6b)) & + PMIC_VSEL_MASK; + data |= 5; + writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6b)); + + data = readl(PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6a)); + data |= 2; + writel(data, PMU_REG_BASE + PMIC_REG_TO_BUS_ADDR(0x6a)); + + udelay(100); + + /* GPIO CD */ + writel(0, PINMUX4_SDDET); + + /* SD Pinconf */ + writel(15 << 4, PINCONF3_SDCLK); + writel((1 << 0) | (8 << 4), PINCONF3_SDCMD); + writel((1 << 0) | (8 << 4), PINCONF3_SDDATA0); + writel((1 << 0) | (8 << 4), PINCONF3_SDDATA1); + writel((1 << 0) | (8 << 4), PINCONF3_SDDATA2); + writel((1 << 0) | (8 << 4), PINCONF3_SDDATA3); + + /* Set SD clock mux */ + do { + data = readl(CRG_REG_BASE + 0xb8); + data |= ((1 << 6) | (1 << 6 << 16) | (0 << 4) | (3 << 4 << 16)); + writel(data, CRG_REG_BASE + 0xb8); + + data = readl(CRG_REG_BASE + 0xb8); + } while ((data & ((1 << 6) | (3 << 4))) != ((1 << 6) | (0 << 4))); + + /* Take SD out of reset */ + writel(1 << 18, CRG_PERRSTDIS4); + do { + data = readl(CRG_PERRSTSTAT4); + } while ((data & (1 << 18)) == (1 << 18)); + + /* Enable hclk_gate_sd */ + data = readl(CRG_REG_BASE + 0); + data |= (1 << 30); + writel(data, CRG_REG_BASE + 0); + + /* Enable clk_andgt_mmc */ + data = readl(CRG_REG_BASE + 0xf4); + data |= ((1 << 3) | (1 << 3 << 16)); + writel(data, CRG_REG_BASE + 0xf4); + + /* Enable clk_gate_sd */ + data = readl(CRG_PEREN4); + data |= (1 << 17); + writel(data, CRG_PEREN4); + do { + data = readl(CRG_PERCLKEN4); + } while ((data & (1 << 17)) != (1 << 17)); +} + +static void show_psci_version(void) +{ + struct arm_smccc_res res; + + arm_smccc_smc(ARM_PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0, 0, 0, 0, 0, &res); + + printf("PSCI: v%ld.%ld\n", + PSCI_VERSION_MAJOR(res.a0), + PSCI_VERSION_MINOR(res.a0)); +} + +int board_init(void) +{ + /* Init SD */ + hikey960_sd_init(); + + show_psci_version(); + + return 0; +} + +void reset_cpu(ulong addr) +{ + psci_system_reset(); +} diff --git a/configs/hikey960_defconfig b/configs/hikey960_defconfig new file mode 100644 index 0000000000..6ed252f658 --- /dev/null +++ b/configs/hikey960_defconfig @@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_TARGET_HIKEY960=y +CONFIG_SYS_TEXT_BASE=0x1ac98000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_IDENT_STRING="\nHikey960" +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTDELAY=3 +CONFIG_SYS_PROMPT="U-Boot => " +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA6,115200n8 root=/dev/mmcblk0p2 rw" +CONFIG_MISC_INIT_R=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_DEFAULT_DEVICE_TREE="hi3660-hikey960" +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_CMD_MMC=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_MEMINFO=y +CONFIG_ENV_IS_IN_EXT4=y +CONFIG_ENV_EXT4_INTERFACE="mmc" +CONFIG_ENV_EXT4_DEVICE_AND_PART="0:2" +CONFIG_ENV_EXT4_FILE="/uboot.env" +CONFIG_DM_MMC=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_K3=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_SINGLE=y diff --git a/include/configs/hikey960.h b/include/configs/hikey960.h new file mode 100644 index 0000000000..f6f9c8d85a --- /dev/null +++ b/include/configs/hikey960.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2019 Linaro + * Author: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org + */ + +#ifndef __HIKEY_H +#define __HIKEY_H + +#include <linux/sizes.h> + +#define CONFIG_SYS_BOOTM_LEN SZ_64M + +/* Physical Memory Map */ + +/* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */ + +#define PHYS_SDRAM_1 0x00000000 +#define PHYS_SDRAM_1_SIZE 0xC0000000 + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 19000000 + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE 0xe82b1000 +#define GICC_BASE 0xe82b2000 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M) + +#define CONFIG_ENV_SIZE 0x1000 + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "image=Image\0" \ + "fdtfile=hi3660-hikey960.dtb\0" \ + "fdt_addr_r=0x10000000\0" \ + "kernel_addr_r=0x11000000\0" \ + "scriptaddr=0x00020000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + BOOTENV + +#define CONFIG_ENV_SIZE 0x1000 + +/* TODO: Remove this once the SD clock is fixed */ +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1024 + +#endif /* __HIKEY_H */

This commit adds MMC driver support for HI3660 SoC reusing hi6220_dw_mmc driver. Since HI3660 operates at different clock rate and uses fifo mode now, let's introduce the platform data and utilize it for different SoCs supported by this driver.

Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org --- drivers/mmc/hi6220_dw_mmc.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/hi6220_dw_mmc.c b/drivers/mmc/hi6220_dw_mmc.c index effd1e4c7c..6de7924383 100644 --- a/drivers/mmc/hi6220_dw_mmc.c +++ b/drivers/mmc/hi6220_dw_mmc.c @@ -22,6 +22,11 @@ struct hi6220_dwmmc_priv_data { struct dwmci_host host; };

+struct hisi_mmc_data { + unsigned int clock; + bool use_fifo; +}; + static int hi6220_dwmmc_ofdata_to_platdata(struct udevice *dev) { struct hi6220_dwmmc_priv_data *priv = dev_get_priv(dev); @@ -49,13 +54,17 @@ static int hi6220_dwmmc_probe(struct udevice *dev) struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct hi6220_dwmmc_priv_data *priv = dev_get_priv(dev); struct dwmci_host *host = &priv->host; + struct hisi_mmc_data *mmc_data; + + mmc_data = (struct hisi_mmc_data *)dev_get_driver_data(dev);

/* Use default bus speed due to absence of clk driver */ - host->bus_hz = 50000000; + host->bus_hz = mmc_data->clock;

dwmci_setup_cfg(&plat->cfg, host, host->bus_hz, 400000); host->mmc = &plat->mmc;

+ host->fifo_mode = mmc_data->use_fifo; host->mmc->priv = &priv->host; upriv->mmc = host->mmc; host->mmc->dev = dev; @@ -75,9 +84,23 @@ static int hi6220_dwmmc_bind(struct udevice *dev) return 0; }

+static const struct hisi_mmc_data hi3660_mmc_data = { + .clock = 3200000, + .use_fifo = true, +}; + +static const struct hisi_mmc_data hi6220_mmc_data = { + .clock = 50000000, + .use_fifo = false, +}; + static const struct udevice_id hi6220_dwmmc_ids[] = { - { .compatible = "hisilicon,hi6220-dw-mshc" }, - { .compatible = "hisilicon,hi3798cv200-dw-mshc" }, + { .compatible = "hisilicon,hi6220-dw-mshc", + .data = (ulong)&hi6220_mmc_data }, + { .compatible = "hisilicon,hi3798cv200-dw-mshc", + .data = (ulong)&hi6220_mmc_data }, + { .compatible = "hisilicon,hi3660-dw-mshc", + .data = (ulong)&hi3660_mmc_data }, { } };

Add MAINTAINERS entry for HI3660 SoC by adding the arch includes. While doing so, adding myself as the co-maintainer for HISILICON SoCs since I'm planning to maintain HI3660 SoC separately and considering doing improvements to the existing HiSilicon SoC architecture.

Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS index a72ccd0b58..7e485d014d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -167,9 +167,11 @@ F: board/freescale/*mx*/

ARM HISILICON M: Peter Griffin peter.griffin@linaro.org +M: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org S: Maintained F: arch/arm/cpu/armv8/hisilicon F: arch/arm/include/asm/arch-hi6220/ +F: arch/arm/include/asm/arch-hi3660/

ARM MARVELL KIRKWOOD ARMADA-XP ARMADA-38X ARMADA-37XX ARMADA-7K/8K M: Stefan Roese sr@denx.de