On 3 December 2014 at 07:07, Shengzhou Liu Shengzhou.Liu@freescale.com wrote:

Add support for SST25WF040B-40I-SN flash. Tested on T1024QDS board.

Signed-off-by: Shengzhou Liu Shengzhou.Liu@freescale.com

drivers/mtd/spi/sf_params.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index 61545ca..6e3a270 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -98,6 +98,7 @@ const struct spi_flash_params spi_flash_params_table[] = { {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, 0, SECT_4K | SST_WP}, {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, 0, SECT_4K | SST_WP}, {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP},

•   {"SST25WF040B",    0x621613, 0x0,       64 * 1024,     8,       0,          SECT_4K | SST_WP},
    {"SST25WF080",     0xbf2505, 0x0,       64 * 1024,    16,       0,          SECT_4K | SST_WP},
  

#endif

#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */

1.8.0

Applied to u-boot-spi/master

thanks!