This patch doesn't apply correctly and the sha1 was not the correct one. Nevertheless i update it and applied it on u-boot-stm/master

Thanks

patrice

On 8/13/20 9:45 AM, Patrice CHOTARD wrote:

Hi Patrick

On 7/30/20 1:57 PM, Patrick Delaunay wrote:

...

Remove the file board/st/stm32mp1/board.c which is not more compiled since commit 156732cc8939 ("board: stm32mp1: move the function board_debug_uart_init in spl.c")

Fixes: 156732cc8939 ("board: stm32mp1: move the function board_debug_uart_init in spl.c") Signed-off-by: Patrick Delaunay patrick.delaunay@st.com

---

Issue when initial patch [1] was applied:

diff --git a/board/st/stm32mp1/board.c b/board/st/stm32mp1/board.c deleted file mode 100644

[1] http://patchwork.ozlabs.org/project/uboot/patch/20200525101949.15944-10-patr...

board/st/stm32mp1/board.c | 36 ------------------------------------ 1 file changed, 36 deletions(-) delete mode 100644 board/st/stm32mp1/board.c

diff --git a/board/st/stm32mp1/board.c b/board/st/stm32mp1/board.c deleted file mode 100644 index 00c61c2886..0000000000 --- a/board/st/stm32mp1/board.c +++ /dev/null @@ -1,36 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause -/*

• • Copyright (C) 2018, STMicroelectronics - All Rights Reserved
• */

-#include <common.h> -#include <asm/io.h> -#include <linux/bitops.h> -#include <linux/delay.h>

-#ifdef CONFIG_DEBUG_UART_BOARD_INIT -void board_debug_uart_init(void) -{ -#if (CONFIG_DEBUG_UART_BASE == STM32_UART4_BASE)

-#define RCC_MP_APB1ENSETR (STM32_RCC_BASE + 0x0A00) -#define RCC_MP_AHB4ENSETR (STM32_RCC_BASE + 0x0A28)

• /* UART4 clock enable */
• setbits_le32(RCC_MP_APB1ENSETR, BIT(16));

-#define GPIOG_BASE 0x50008000

• /* GPIOG clock enable */
• writel(BIT(6), RCC_MP_AHB4ENSETR);
• /* GPIO configuration for EVAL board

• * => Uart4 TX = G11
  

• */
  

• writel(0xffbfffff, GPIOG_BASE + 0x00);
• writel(0x00006000, GPIOG_BASE + 0x24);

-#else

-#error("CONFIG_DEBUG_UART_BASE: not supported value")

-#endif -} -#endif

Reviewed-by: Patrice Chotard patrice.chotard@st.com

Thanks

Patrice _______________________________________________ Uboot-stm32 mailing list Uboot-stm32@st-md-mailman.stormreply.com https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32