The TI DP83867 phy has been replaced with the MaxLinear GPY111 phy due to part availability. Add support for it: - increase post-reset time to 300ms per datasheet - leave tx-delay/rx-delay undefined in dt defaulting to 2.0ns

Signed-off-by: Tim Harvey tharvey@gateworks.com --- arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi index 767024385156..c15e623f3cb8 100644 --- a/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi @@ -8,7 +8,7 @@ &fec1 { phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; phy-reset-duration = <1>; - phy-reset-post-delay = <1>; + phy-reset-post-delay = <300>; };

&pinctrl_fec1 {