Commit 3d5a335c announced that all the nand_spl boards would be removed before v2014.07 release.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---

board/freescale/p1023rds/p1023rds.c | 5 -- board/freescale/p1023rds/tlb.c | 2 - boards.cfg | 1 - include/configs/P1023RDS.h | 46 +------------ nand_spl/board/freescale/p1023rds/Makefile | 87 ------------------------ nand_spl/board/freescale/p1023rds/nand_boot.c | 96 --------------------------- 6 files changed, 1 insertion(+), 236 deletions(-) delete mode 100644 nand_spl/board/freescale/p1023rds/Makefile delete mode 100644 nand_spl/board/freescale/p1023rds/nand_boot.c

diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c index d8c8745..2b883c7 100644 --- a/board/freescale/p1023rds/p1023rds.c +++ b/board/freescale/p1023rds/p1023rds.c @@ -182,11 +182,6 @@ void ft_board_setup(void *blob, bd_t *bd)

fdt_fixup_memory(blob, (u64)base, (u64)size);

- /* By default NOR is on, and NAND is disabled */ -#ifdef CONFIG_NAND_U_BOOT - do_fixup_by_path_string(blob, "nor_flash", "status", "disabled"); - do_fixup_by_path_string(blob, "nand_flash", "status", "okay"); -#endif #ifdef CONFIG_HAS_FSL_DR_USB fdt_fixup_dr_usb(blob, bd); #endif diff --git a/board/freescale/p1023rds/tlb.c b/board/freescale/p1023rds/tlb.c index 8b2bf50..3c92c14 100644 --- a/board/freescale/p1023rds/tlb.c +++ b/board/freescale/p1023rds/tlb.c @@ -36,7 +36,6 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_4M, 1),

-#ifndef CONFIG_NAND_SPL /* *W*G* - BCSR and NOR flash on local bus*/ /* This will be changed to *I*G* after relocation to RAM. */ SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS, @@ -79,7 +78,6 @@ struct fsl_e_tlb_entry tlb_table[] = { CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_1M, 1), -#endif

/* *I*G - NAND */ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, diff --git a/boards.cfg b/boards.cfg index c562c7f..f55cc38 100644 --- a/boards.cfg +++ b/boards.cfg @@ -862,7 +862,6 @@ Active powerpc mpc85xx - freescale p1022ds Active powerpc mpc85xx - freescale p1022ds P1022DS_SPIFLASH P1022DS:SPIFLASH Timur Tabi timur@freescale.com Active powerpc mpc85xx - freescale p1023rdb P1023RDB - - Active powerpc mpc85xx - freescale p1023rds P1023RDS - Roy Zang tie-fei.zang@freescale.com -Active powerpc mpc85xx - freescale p1023rds P1023RDS_NAND P1023RDS:NAND Roy Zang tie-fei.zang@freescale.com Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB P1_P2_RDB:P1011RDB - Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB_36BIT P1_P2_RDB:P1011RDB,36BIT - Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB_36BIT_SDCARD P1_P2_RDB:P1011RDB,36BIT,SDCARD - diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h index 8601eec..ac75b9c 100644 --- a/include/configs/P1023RDS.h +++ b/include/configs/P1023RDS.h @@ -14,23 +14,6 @@ #ifndef __CONFIG_H #define __CONFIG_H

-#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT -#define CONFIG_RAMBOOT_NAND -#endif - -#ifdef CONFIG_NAND_U_BOOT -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_TEXT_BASE 0x11001000 - -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif /* CONFIG_NAND_SPL */ -#endif - #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif @@ -162,7 +145,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_BCSR_BASE 0xe0000000 /* start of on board FPGA */ #define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE

-#ifndef CONFIG_NAND #define CONFIG_SYS_FLASH_BASE 0xee000000 /* start of FLASH 32M */

#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -179,11 +161,8 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#else -#define CONFIG_SYS_NO_FLASH -#endif

-#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) +#if defined(CONFIG_SYS_SPL) #define CONFIG_SYS_RAMBOOT #endif

@@ -239,17 +218,6 @@ extern unsigned long get_clock_freq(void); | OR_FCM_TRLX \ | OR_FCM_EHTR)

-#ifdef CONFIG_RAMBOOT_NAND -/* NAND Base Address */ -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -/* chip select 1 - BCSR */ -#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_BCSR_BASE_PHYS) \ - | BR_MS_GPCM | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \ - | OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \ - | OR_GPCM_EAD) -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ /* chip select 1 - BCSR */ @@ -258,7 +226,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \ | OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \ | OR_GPCM_EAD) -#endif

/* Serial Port * open - index 2 @@ -381,15 +348,9 @@ extern unsigned long get_clock_freq(void); #define CONFIG_ENV_OVERWRITE

#if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#else #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x4000) #define CONFIG_ENV_SIZE 0x2000 -#endif #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) @@ -496,15 +457,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_PHY_MARVELL #endif

-#ifndef CONFIG_NAND /* Default address of microcode for the Linux Fman driver */ /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#else -#define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_FMAN_FW_ADDR 0x1f00000 -#endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)

diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile deleted file mode 100644 index fba9f93..0000000 --- a/nand_spl/board/freescale/p1023rds/Makefile +++ /dev/null @@ -1,87 +0,0 @@ -# -# Copyright 2010-2011 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PAD_TO := 0xfff01000 - -nandobj := $(objtree)/nand_spl/ - -LDSCRIPT= $(srctree)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ - $(LDFLAGS) $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o resetvec.o -COBJS = cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \ - nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ - -ansi -D__ASSEMBLY__ -P - <$< >$@ - -# create symbolic links for common files - -$(obj)/cache.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/lib/cache.c $@ - -$(obj)/cpu_init_early.c: - @rm -f $@ - ln -sf $(srctree)/$(CPUDIR)/cpu_init_early.c $@ - -$(obj)/spl_minimal.c: - @rm -f $@ - ln -sf $(srctree)/$(CPUDIR)/spl_minimal.c $@ - -$(obj)/fsl_law.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc8xxx/law.c $@ - -$(obj)/law.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/law.c $@ - -$(obj)/nand_boot_fsl_elbc.c: - @rm -f $@ - ln -sf $(srctree)/nand_spl/nand_boot_fsl_elbc.c $@ - -$(obj)/ns16550.c: - @rm -f $@ - ln -sf $(srctree)/drivers/serial/ns16550.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(srctree)/$(CPUDIR)/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -sf $(srctree)/$(CPUDIR)/start.S $@ - -$(obj)/tlb.c: - @rm -f $@ - ln -sf $(srctree)/$(CPUDIR)/tlb.c $@ - -$(obj)/tlb_table.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/tlb.c $@ diff --git a/nand_spl/board/freescale/p1023rds/nand_boot.c b/nand_spl/board/freescale/p1023rds/nand_boot.c deleted file mode 100644 index d9afa6d..0000000 --- a/nand_spl/board/freescale/p1023rds/nand_boot.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - * Author: Roy Zang tie-fei.zang@freescale.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <ns16550.h> -#include <asm/io.h> -#include <nand.h> -#include <asm/fsl_law.h> -#include <fsl_ddr_sdram.h> -#include <asm/global_data.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* Fixed sdram init -- doesn't use serial presence detect. */ -void sdram_init(void) -{ - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - - set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); - - __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); - __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); - __raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds); - __raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config); - __raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3); - __raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0); - __raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1); - __raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2); - __raw_writel(CONFIG_SYS_DDR_CONTROL2, &ddr->sdram_cfg_2); - __raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode); - __raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2); - __raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval); - __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init); - __raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl); - __raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4); - __raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5); - __raw_writel(CONFIG_SYS_DDR_ZQ_CNTL, &ddr->ddr_zq_cntl); - __raw_writel(CONFIG_SYS_DDR_WRLVL_CNTL, &ddr->ddr_wrlvl_cntl); - __raw_writel(CONFIG_SYS_DDR_CDR_1, &ddr->ddr_cdr1); - __raw_writel(CONFIG_SYS_DDR_CDR_2, &ddr->ddr_cdr2); - /* Set, but do not enable the memory */ - __raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg); - - asm volatile("sync;isync"); - udelay(500); - - /* Let the controller go */ - out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN); -} - -void board_init_f(ulong bootflag) -{ - u32 plat_ratio; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - - /* initialize selected port with appropriate baud rate */ - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - plat_ratio >>= 1; - gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - gd->bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot... "); - /* Initialize the DDR3 */ - sdram_init(); - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0, - CONFIG_SYS_NAND_U_BOOT_RELOC); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -}

Commit 3d5a335c announced that all the nand_spl boards would be removed before v2014.07 release.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---

boards.cfg | 1 - include/configs/MPC8572DS.h | 30 --------- nand_spl/board/freescale/mpc8572ds/Makefile | 91 -------------------------- nand_spl/board/freescale/mpc8572ds/nand_boot.c | 67 ------------------- 4 files changed, 189 deletions(-) delete mode 100644 nand_spl/board/freescale/mpc8572ds/Makefile delete mode 100644 nand_spl/board/freescale/mpc8572ds/nand_boot.c

diff --git a/boards.cfg b/boards.cfg index f55cc38..cf843ca 100644 --- a/boards.cfg +++ b/boards.cfg @@ -823,7 +823,6 @@ Active powerpc mpc85xx - freescale mpc8569mds Active powerpc mpc85xx - freescale mpc8569mds MPC8569MDS_NAND MPC8569MDS:NAND - Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS - York Sun yorksun@freescale.com Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS_36BIT MPC8572DS:36BIT York Sun yorksun@freescale.com -Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS_NAND MPC8572DS:NAND - Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NAND P1010RDB:P1010RDB_PA,36BIT,NAND - Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NAND_SECBOOT P1010RDB:P1010RDB_PA,36BIT,NAND_SECBOOT,SECURE_BOOT - Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NOR P1010RDB:P1010RDB_PA,36BIT - diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 48ae9d4..0b07876 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -20,18 +20,6 @@ #define CONFIG_PHYS_64BIT #endif

-#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT -#define CONFIG_RAMBOOT_NAND -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_TEXT_BASE 0xf8f82000 -#endif /* CONFIG_NAND_SPL */ -#endif - #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif @@ -208,12 +196,7 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */

-#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#else #undef CONFIG_SYS_RAMBOOT -#endif

#define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI @@ -353,17 +336,10 @@ | OR_FCM_TRLX \ | OR_FCM_EHTR)

-#ifdef CONFIG_RAMBOOT_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif #define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ @@ -600,12 +576,6 @@ */

#if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024)\ - + CONFIG_SYS_NAND_BLOCK_SIZE) -#endif

#else #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile deleted file mode 100644 index 9f33802..0000000 --- a/nand_spl/board/freescale/mpc8572ds/Makefile +++ /dev/null @@ -1,91 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# Copyright 2009-2011 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE_SPL := 0xfff00000 -PAD_TO := 0xfff01000 - -nandobj := $(objtree)/nand_spl/ - -LDSCRIPT= $(srctree)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ - $(LDFLAGS) $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o resetvec.o -COBJS = cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \ - nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ - -ansi -D__ASSEMBLY__ -P - <$< >$@ - -# create symbolic links for common files - -$(obj)/cache.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/lib/cache.c $@ - -$(obj)/cpu_init_early.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@ - -$(obj)/spl_minimal.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@ - -$(obj)/fsl_law.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc8xxx/law.c $@ - -$(obj)/law.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/law.c $@ - -$(obj)/nand_boot_fsl_elbc.c: - @rm -f $@ - ln -sf $(srctree)/nand_spl/nand_boot_fsl_elbc.c $@ - -$(obj)/ns16550.c: - @rm -f $@ - ln -sf $(srctree)/drivers/serial/ns16550.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(srctree)/$(CPUDIR)/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/start.S $@ - -$(obj)/tlb.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/tlb.c $@ - -$(obj)/tlb_table.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/tlb.c $@ diff --git a/nand_spl/board/freescale/mpc8572ds/nand_boot.c b/nand_spl/board/freescale/mpc8572ds/nand_boot.c deleted file mode 100644 index 3bc0927..0000000 --- a/nand_spl/board/freescale/mpc8572ds/nand_boot.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <ns16550.h> -#include <asm/io.h> -#include <nand.h> - -u32 sysclk_tbl[] = { - 33333000, 39999600, 49999500, 66666000, - 83332500, 99999000, 133332000, 166665000 -}; - -void board_init_f(ulong bootflag) -{ - int px_spd; - u32 plat_ratio, bus_clk, sys_clk; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - /* for FPGA */ - set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); - set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); -#else -#error CONFIG_SYS_BR3_PRELIM, CONFIG_SYS_OR3_PRELIM must be defined -#endif - - /* initialize selected port with appropriate baud rate */ - px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); - sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK]; - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - bus_clk = sys_clk * plat_ratio / 2; - - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot... "); - - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0, - CONFIG_SYS_NAND_U_BOOT_RELOC); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -}

Commit 3d5a335c announced that all the nand_spl boards would be removed before v2014.07 release.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---

boards.cfg | 1 - include/configs/MPC8569MDS.h | 29 -------- nand_spl/board/freescale/mpc8569mds/Makefile | 91 ------------------------- nand_spl/board/freescale/mpc8569mds/nand_boot.c | 60 ---------------- 4 files changed, 181 deletions(-) delete mode 100644 nand_spl/board/freescale/mpc8569mds/Makefile delete mode 100644 nand_spl/board/freescale/mpc8569mds/nand_boot.c

diff --git a/boards.cfg b/boards.cfg index cf843ca..df1ccf0 100644 --- a/boards.cfg +++ b/boards.cfg @@ -820,7 +820,6 @@ Active powerpc mpc85xx - freescale mpc8560ads Active powerpc mpc85xx - freescale mpc8568mds MPC8568MDS - - Active powerpc mpc85xx - freescale mpc8569mds MPC8569MDS - - Active powerpc mpc85xx - freescale mpc8569mds MPC8569MDS_ATM MPC8569MDS:ATM - -Active powerpc mpc85xx - freescale mpc8569mds MPC8569MDS_NAND MPC8569MDS:NAND - Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS - York Sun yorksun@freescale.com Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS_36BIT MPC8572DS:36BIT York Sun yorksun@freescale.com Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NAND P1010RDB:P1010RDB_PA,36BIT,NAND - diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 5165a45..4da247c 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -49,18 +49,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_L2_CACHE /* toggle L2 cache */ #define CONFIG_BTB /* toggle branch predition */

-#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT 1 -#define CONFIG_RAMBOOT_NAND 1 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_TEXT_BASE 0xf8f82000 -#endif -#endif - #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xfff80000 #endif @@ -180,12 +168,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */

-#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#else #undef CONFIG_SYS_RAMBOOT -#endif

#define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI @@ -228,17 +211,10 @@ extern unsigned long get_clock_freq(void); | OR_FCM_TRLX \ | OR_FCM_EHTR)

-#ifdef CONFIG_RAMBOOT_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM/* NAND Options */ -#define CONFIG_SYS_BR3_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR3_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif

#define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */ @@ -476,11 +452,6 @@ extern unsigned long get_clock_freq(void); * Environment */ #if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#endif #else #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile deleted file mode 100644 index 9f33802..0000000 --- a/nand_spl/board/freescale/mpc8569mds/Makefile +++ /dev/null @@ -1,91 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# Copyright 2009-2011 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE_SPL := 0xfff00000 -PAD_TO := 0xfff01000 - -nandobj := $(objtree)/nand_spl/ - -LDSCRIPT= $(srctree)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ - $(LDFLAGS) $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o resetvec.o -COBJS = cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \ - nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ - -ansi -D__ASSEMBLY__ -P - <$< >$@ - -# create symbolic links for common files - -$(obj)/cache.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/lib/cache.c $@ - -$(obj)/cpu_init_early.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@ - -$(obj)/spl_minimal.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@ - -$(obj)/fsl_law.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc8xxx/law.c $@ - -$(obj)/law.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/law.c $@ - -$(obj)/nand_boot_fsl_elbc.c: - @rm -f $@ - ln -sf $(srctree)/nand_spl/nand_boot_fsl_elbc.c $@ - -$(obj)/ns16550.c: - @rm -f $@ - ln -sf $(srctree)/drivers/serial/ns16550.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(srctree)/$(CPUDIR)/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/start.S $@ - -$(obj)/tlb.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/tlb.c $@ - -$(obj)/tlb_table.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/tlb.c $@ diff --git a/nand_spl/board/freescale/mpc8569mds/nand_boot.c b/nand_spl/board/freescale/mpc8569mds/nand_boot.c deleted file mode 100644 index ce7f619..0000000 --- a/nand_spl/board/freescale/mpc8569mds/nand_boot.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <mpc85xx.h> -#include <asm/io.h> -#include <ns16550.h> -#include <nand.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <fsl_ddr_sdram.h> -#include <asm/fsl_law.h> - -#define SYSCLK_66 66666666 - -DECLARE_GLOBAL_DATA_PTR; - -void board_init_f(ulong bootflag) -{ - uint plat_ratio, bus_clk, sys_clk; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - sys_clk = SYSCLK_66; - - plat_ratio = gur->porpllsr & 0x0000003e; - plat_ratio >>= 1; - bus_clk = plat_ratio * sys_clk; - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot... "); - - /* copy code to DDR and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0, - CONFIG_SYS_NAND_U_BOOT_RELOC); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -}

Commit 3d5a335c announced that all the nand_spl boards would be removed before v2014.07 release.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---

boards.cfg | 1 - include/configs/MPC8536DS.h | 29 +------- nand_spl/board/freescale/mpc8536ds/Makefile | 91 -------------------------- nand_spl/board/freescale/mpc8536ds/nand_boot.c | 67 ------------------- 4 files changed, 2 insertions(+), 186 deletions(-) delete mode 100644 nand_spl/board/freescale/mpc8536ds/Makefile delete mode 100644 nand_spl/board/freescale/mpc8536ds/nand_boot.c

diff --git a/boards.cfg b/boards.cfg index df1ccf0..50e6d76 100644 --- a/boards.cfg +++ b/boards.cfg @@ -804,7 +804,6 @@ Active powerpc mpc85xx - freescale corenet_ds Active powerpc mpc85xx - freescale corenet_ds P5040DS_SPIFLASH P5040DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS - - Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS_36BIT MPC8536DS:36BIT - -Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS_NAND MPC8536DS:NAND - Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS_SDCARD MPC8536DS:SDCARD - Active powerpc mpc85xx - freescale mpc8536ds MPC8536DS_SPIFLASH MPC8536DS:SPIFLASH - Active powerpc mpc85xx - freescale mpc8540ads MPC8540ADS - Kumar Gala kumar.gala@freescale.com diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 72f5fde..2722164 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -19,18 +19,6 @@ #define CONFIG_PHYS_64BIT 1 #endif

-#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT 1 -#define CONFIG_RAMBOOT_NAND 1 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_TEXT_BASE 0xf8f82000 -#endif /* CONFIG_NAND_SPL */ -#endif - #ifdef CONFIG_SDCARD #define CONFIG_RAMBOOT_SDCARD 1 #define CONFIG_SYS_TEXT_BASE 0xf8f40000 @@ -222,8 +210,7 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */

-#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \ - defined(CONFIG_RAMBOOT_SPIFLASH) +#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) #define CONFIG_SYS_RAMBOOT #define CONFIG_SYS_EXTRA_ENV_RELOC #else @@ -352,17 +339,10 @@ | OR_FCM_TRLX \ | OR_FCM_EHTR)

-#ifdef CONFIG_RAMBOOT_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif

#define CONFIG_SYS_BR4_PRELIM \ (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ @@ -625,12 +605,7 @@ */

#if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) -#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) -#elif defined(CONFIG_RAMBOOT_SPIFLASH) +#if defined(CONFIG_RAMBOOT_SPIFLASH) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile deleted file mode 100644 index 9f33802..0000000 --- a/nand_spl/board/freescale/mpc8536ds/Makefile +++ /dev/null @@ -1,91 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# Copyright 2009-2011 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE_SPL := 0xfff00000 -PAD_TO := 0xfff01000 - -nandobj := $(objtree)/nand_spl/ - -LDSCRIPT= $(srctree)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ - $(LDFLAGS) $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o resetvec.o -COBJS = cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \ - nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ - -ansi -D__ASSEMBLY__ -P - <$< >$@ - -# create symbolic links for common files - -$(obj)/cache.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/lib/cache.c $@ - -$(obj)/cpu_init_early.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@ - -$(obj)/spl_minimal.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@ - -$(obj)/fsl_law.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc8xxx/law.c $@ - -$(obj)/law.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/law.c $@ - -$(obj)/nand_boot_fsl_elbc.c: - @rm -f $@ - ln -sf $(srctree)/nand_spl/nand_boot_fsl_elbc.c $@ - -$(obj)/ns16550.c: - @rm -f $@ - ln -sf $(srctree)/drivers/serial/ns16550.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(srctree)/$(CPUDIR)/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/start.S $@ - -$(obj)/tlb.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/tlb.c $@ - -$(obj)/tlb_table.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/tlb.c $@ diff --git a/nand_spl/board/freescale/mpc8536ds/nand_boot.c b/nand_spl/board/freescale/mpc8536ds/nand_boot.c deleted file mode 100644 index 71178e4..0000000 --- a/nand_spl/board/freescale/mpc8536ds/nand_boot.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <ns16550.h> -#include <asm/io.h> -#include <nand.h> - -u32 sysclk_tbl[] = { - 33333000, 39999600, 49999500, 66666000, - 83332500, 99999000, 133332000, 166665000 -}; - -void board_init_f(ulong bootflag) -{ - int px_spd; - u32 plat_ratio, bus_clk, sys_clk; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - /* for FPGA */ - set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); - set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); -#else -#error CONFIG_SYS_BR3_PRELIM, CONFIG_SYS_OR3_PRELIM must be defined -#endif - - /* initialize selected port with appropriate baud rate */ - px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); - sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK]; - plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; - bus_clk = sys_clk * plat_ratio / 2; - - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot... "); - - /* copy code to RAM and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0, - CONFIG_SYS_NAND_U_BOOT_RELOC); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -}

Commit 3d5a335c announced that all the nand_spl boards would be removed before v2014.07 release.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---

boards.cfg | 1 - include/configs/MPC8315ERDB.h | 32 +---------- nand_spl/board/freescale/mpc8315erdb/Makefile | 71 ------------------------- nand_spl/board/freescale/mpc8315erdb/u-boot.lds | 39 -------------- 4 files changed, 2 insertions(+), 141 deletions(-) delete mode 100644 nand_spl/board/freescale/mpc8315erdb/Makefile delete mode 100644 nand_spl/board/freescale/mpc8315erdb/u-boot.lds

diff --git a/boards.cfg b/boards.cfg index 50e6d76..37f5f5e 100644 --- a/boards.cfg +++ b/boards.cfg @@ -707,7 +707,6 @@ Active powerpc mpc83xx - freescale mpc8313erdb Active powerpc mpc83xx - freescale mpc8313erdb MPC8313ERDB_NAND_33 MPC8313ERDB:SYS_33MHZ,NAND - Active powerpc mpc83xx - freescale mpc8313erdb MPC8313ERDB_NAND_66 MPC8313ERDB:SYS_66MHZ,NAND - Active powerpc mpc83xx - freescale mpc8315erdb MPC8315ERDB - Dave Liu daveliu@freescale.com -Active powerpc mpc83xx - freescale mpc8315erdb MPC8315ERDB_NAND MPC8315ERDB:NAND_U_BOOT Dave Liu daveliu@freescale.com Active powerpc mpc83xx - freescale mpc8323erdb MPC8323ERDB - Michael Barkowski michael.barkowski@freescale.com Active powerpc mpc83xx - freescale mpc832xemds MPC832XEMDS - Dave Liu daveliu@freescale.com Active powerpc mpc83xx - freescale mpc832xemds MPC832XEMDS_ATM MPC832XEMDS:PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1 Dave Liu daveliu@freescale.com diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 3dd52ce..98e9072 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -15,14 +15,6 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 16384 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000

-#ifdef CONFIG_NAND_U_BOOT -#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */ -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#endif /* CONFIG_NAND_SPL */ -#endif /* CONFIG_NAND_U_BOOT */ - #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xFE000000 #endif @@ -93,10 +85,6 @@ */ #define CONFIG_SYS_IMMR 0xE0000000

-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) -#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR -#endif - /* * Arbiter Setup */ @@ -281,17 +269,10 @@ | OR_FCM_EHTR) /* 0xFFFF8396 */

-#ifdef CONFIG_NAND_U_BOOT -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM -#else #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM -#endif

#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) @@ -459,16 +440,7 @@ /* * Environment */ -#if defined(CONFIG_NAND_U_BOOT) - #define CONFIG_ENV_IS_IN_NAND 1 - #define CONFIG_ENV_OFFSET (512 * 1024) - #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE - #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4) - #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ - CONFIG_ENV_RANGE) -#elif !defined(CONFIG_SYS_RAMBOOT) +#if !defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR \ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) @@ -503,7 +475,7 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_PCI

-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT) +#if defined(CONFIG_SYS_RAMBOOT) #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/nand_spl/board/freescale/mpc8315erdb/Makefile b/nand_spl/board/freescale/mpc8315erdb/Makefile deleted file mode 100644 index f4e7854..0000000 --- a/nand_spl/board/freescale/mpc8315erdb/Makefile +++ /dev/null @@ -1,71 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# (C) Copyright 2008 Freescale Semiconductor -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PAD_TO := 0xfff04000 - -nandobj := $(objtree)/nand_spl/ - -LDSCRIPT= $(srctree)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ - $(LDFLAGS) $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o ticks.o -COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o spl_minimal.o \ - time.o cache.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ - -# create symbolic links for common files - -$(obj)/start.S: - ln -sf $(srctree)/arch/powerpc/cpu/mpc83xx/start.S $@ - -$(obj)/nand_boot_fsl_elbc.c: - ln -sf $(srctree)/nand_spl/nand_boot_fsl_elbc.c $@ - -$(obj)/sdram.c: - ln -sf $(srctree)/board/$(BOARDDIR)/sdram.c $@ - -$(obj)/$(BOARD).c: - ln -sf $(srctree)/board/$(BOARDDIR)/$(BOARD).c $@ - -$(obj)/ns16550.c: - ln -sf $(srctree)/drivers/serial/ns16550.c $@ - -$(obj)/spl_minimal.c: - ln -sf $(srctree)/arch/powerpc/cpu/mpc83xx/spl_minimal.c $@ - -$(obj)/cache.c: - ln -sf $(srctree)/arch/powerpc/lib/cache.c $@ - -$(obj)/time.c: - ln -sf $(srctree)/arch/powerpc/lib/time.c $@ - -$(obj)/ticks.S: - ln -sf $(srctree)/arch/powerpc/lib/ticks.S $@ diff --git a/nand_spl/board/freescale/mpc8315erdb/u-boot.lds b/nand_spl/board/freescale/mpc8315erdb/u-boot.lds deleted file mode 100644 index 774772b..0000000 --- a/nand_spl/board/freescale/mpc8315erdb/u-boot.lds +++ /dev/null @@ -1,39 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright 2008 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - . = 0xfff00000; - .text : { - *(.text*) - . = ALIGN(16); - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - . = ALIGN(8); - .data : { - *(.data*) - *(.sdata*) - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - - . = ALIGN(8); - __bss_start = .; - .bss (NOLOAD) : { - *(.*bss) - } - __bss_end = .; -} -ENTRY(_start) -ASSERT(__bss_end <= 0xfff01000, "NAND bootstrap too big");

Commit 3d5a335c announced that all the nand_spl boards would be removed before v2014.07 release.

Also update README.scrapyard.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---

board/sheldon/simpc8313/Makefile | 8 - board/sheldon/simpc8313/README.simpc8313 | 80 ---- board/sheldon/simpc8313/sdram.c | 177 --------- board/sheldon/simpc8313/simpc8313.c | 150 ------- boards.cfg | 2 - doc/README.scrapyard | 21 +- include/configs/SIMPC8313.h | 580 ---------------------------- nand_spl/board/sheldon/simpc8313/Makefile | 81 ---- nand_spl/board/sheldon/simpc8313/config.mk | 5 - nand_spl/board/sheldon/simpc8313/u-boot.lds | 38 -- 10 files changed, 11 insertions(+), 1131 deletions(-) delete mode 100644 board/sheldon/simpc8313/Makefile delete mode 100644 board/sheldon/simpc8313/README.simpc8313 delete mode 100644 board/sheldon/simpc8313/sdram.c delete mode 100644 board/sheldon/simpc8313/simpc8313.c delete mode 100644 include/configs/SIMPC8313.h delete mode 100644 nand_spl/board/sheldon/simpc8313/Makefile delete mode 100644 nand_spl/board/sheldon/simpc8313/config.mk delete mode 100644 nand_spl/board/sheldon/simpc8313/u-boot.lds

diff --git a/board/sheldon/simpc8313/Makefile b/board/sheldon/simpc8313/Makefile deleted file mode 100644 index a824c41..0000000 --- a/board/sheldon/simpc8313/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := simpc8313.o sdram.o diff --git a/board/sheldon/simpc8313/README.simpc8313 b/board/sheldon/simpc8313/README.simpc8313 deleted file mode 100644 index b362c6a..0000000 --- a/board/sheldon/simpc8313/README.simpc8313 +++ /dev/null @@ -1,80 +0,0 @@ -Sheldon Instruments SIMPC8313 Board ------------------------------------------ - -1. Board Switches and Jumpers - - S2 is used to set CFG_RESET_SOURCE. - - To boot the image in Large page NAND flash, use these DIP - switch settings for S2: - - +----------+ ON - | * * **** | - | * * | - +----------+ - 12345678 - - To boot the image in Small page NAND flash, use these DIP - switch settings for S2: - - +----------+ ON - | *** **** | - | * | - +----------+ - 12345678 - (where the '*' indicates the position of the tab of the switch.) - -2. Memory Map - The memory map looks like this: - - 0x0000_0000 0x1fff_ffff DDR 512M - 0x8000_0000 0x8fff_ffff PCI MEM 256M - 0x9000_0000 0x9fff_ffff PCI_MMIO 256M - 0xe000_0000 0xe00f_ffff IMMR 1M - 0xe200_0000 0xe20f_ffff PCI IO 16M - 0xe280_0000 0xe280_7fff NAND FLASH (CS0) 32K - or - 0xe280_0000 0xe281_ffff NAND FLASH (CS0) 128K - 0xff00_0000 0xff00_7fff FPGA (CS1) 1M - -3. Compilation - - Assuming you're using BASH (or similar) as your shell: - - export CROSS_COMPILE=your-cross-compiler-prefix- - make distclean - make SIMPC8313_LP_config - (or make SIMPC8313_SP_config, depending on the page size - of your NAND flash) - make - -4. Downloading and Flashing Images - -4.1 Reflash U-boot Image using U-boot - - =>run update_uboot - - You may want to try - =>tftp $loadaddr $uboot - first, to make sure that the TFTP load will succeed before it - goes ahead and wipes out your current firmware. And of course, - if the new u-boot doesn't boot, you can plug the board into - your PCI slot and with the supplied driver and sample app - you can reburn a working u-boot. - -4.2 Downloading and Booting Linux Kernel - - Ensure that all networking-related environment variables are set - properly (including ipaddr, serverip, gatewayip (if needed), - netmask, ethaddr, eth1addr, fdtfile, and bootfile). - - =>tftp $loadaddr uImage - =>nand write $loadaddr kernel $filesize - =>tftp $loadaddr $fdtfile - =>nand write $loadaddr 7e0000 1800 - - =>boot - -5 Notes - - The console baudrate for SIMPC8313 is 115200bps. diff --git a/board/sheldon/simpc8313/sdram.c b/board/sheldon/simpc8313/sdram.c deleted file mode 100644 index 7c12fe8..0000000 --- a/board/sheldon/simpc8313/sdram.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 - * Copyright (C) Sheldon Instruments, Inc. 2008 - * - * Author: Ron Madrid info@sheldoninst.com - * - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc83xx.h> -#include <spd_sdram.h> -#include <asm/bitops.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/mmu.h> - -DECLARE_GLOBAL_DATA_PTR; - -static long fixed_sdram(void); - -#if defined(CONFIG_NAND_SPL) -void si_wait_i2c(void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - - while (!(__raw_readb(&im->i2c[0].sr) & 0x02)) - ; - - __raw_writeb(0x00, &im->i2c[0].sr); - - sync(); - - return; -} - -void si_read_i2c(u32 lbyte, int count, u8 *buffer) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 i; - u8 chip = 0x50 << 1; /* boot sequencer I2C */ - u32 ubyte = (lbyte & 0xff00) >> 8; - - lbyte &= 0xff; - - /* - * Set up controller - */ - __raw_writeb(0x3f, &im->i2c[0].fdr); - __raw_writeb(0x00, &im->i2c[0].adr); - __raw_writeb(0x00, &im->i2c[0].sr); - __raw_writeb(0x00, &im->i2c[0].dr); - - while (__raw_readb(&im->i2c[0].sr) & 0x20) - ; - - /* - * Writing address to device - */ - __raw_writeb(0xb0, &im->i2c[0].cr); - sync(); - __raw_writeb(chip, &im->i2c[0].dr); - si_wait_i2c(); - - __raw_writeb(0xb0, &im->i2c[0].cr); - sync(); - __raw_writeb(ubyte, &im->i2c[0].dr); - si_wait_i2c(); - - __raw_writeb(lbyte, &im->i2c[0].dr); - si_wait_i2c(); - - __raw_writeb(0xb4, &im->i2c[0].cr); - sync(); - __raw_writeb(chip + 1, &im->i2c[0].dr); - si_wait_i2c(); - - __raw_writeb(0xa0, &im->i2c[0].cr); - sync(); - - /* - * Dummy read - */ - __raw_readb(&im->i2c[0].dr); - - si_wait_i2c(); - - /* - * Read actual data - */ - for (i = 0; i < count; i++) - { - if (i == (count - 2)) /* Reached next to last byte, No ACK */ - __raw_writeb(0xa8, &im->i2c[0].cr); - if (i == (count - 1)) /* Reached last byte, STOP */ - __raw_writeb(0x88, &im->i2c[0].cr); - - /* Read byte of data */ - buffer[i] = __raw_readb(&im->i2c[0].dr); - - if (i == (count - 1)) - break; - si_wait_i2c(); - } - - return; -} -#endif /* CONFIG_NAND_SPL */ - -phys_size_t initdram(int board_type) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbc_t *lbc = &im->im_lbc; - u32 msize; - - if ((__raw_readl(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32) im) - return -1; - - /* DDR SDRAM - Main SODIMM */ - __raw_writel(CONFIG_SYS_DDR_BASE & LAWBAR_BAR, &im->sysconf.ddrlaw[0].bar); - - msize = fixed_sdram(); - - /* Local Bus setup lbcr and mrtpr */ - __raw_writel(CONFIG_SYS_LBC_LBCR, &lbc->lbcr); - __raw_writel(CONFIG_SYS_LBC_MRTPR, &lbc->mrtpr); - sync(); - - /* return total bus SDRAM size(bytes) -- DDR */ - return (msize * 1024 * 1024); -} - -/************************************************************************* - * fixed sdram init -- reads values from boot sequencer I2C - ************************************************************************/ -static long fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 msizelog2, msize = 1; -#if defined(CONFIG_NAND_SPL) - u32 i; - const u8 bytecount = 135; - u8 buffer[bytecount]; - u32 addr, data; - - si_read_i2c(0, bytecount, buffer); - - for (i = 18; i < bytecount; i += 7){ - addr = (u32)buffer[i]; - addr <<= 8; - addr |= (u32)buffer[i + 1]; - addr <<= 2; - data = (u32)buffer[i + 2]; - data <<= 8; - data |= (u32)buffer[i + 3]; - data <<= 8; - data |= (u32)buffer[i + 4]; - data <<= 8; - data |= (u32)buffer[i + 5]; - - __raw_writel(data, (u32 *)(CONFIG_SYS_IMMR + addr)); - } - - sync(); - - /* enable DDR controller */ - __raw_writel((__raw_readl(&im->ddr.sdram_cfg) | SDRAM_CFG_MEM_EN), &im->ddr.sdram_cfg); -#endif /* (CONFIG_NAND_SPL) */ - - msizelog2 = ((__raw_readl(&im->sysconf.ddrlaw[0].ar) & LAWAR_SIZE) + 1); - msize <<= (msizelog2 - 20); - - return msize; -} diff --git a/board/sheldon/simpc8313/simpc8313.c b/board/sheldon/simpc8313/simpc8313.c deleted file mode 100644 index 31406fa..0000000 --- a/board/sheldon/simpc8313/simpc8313.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 - * Copyright (C) Sheldon Instruments, Inc. 2008 - * - * Author: Ron Madrid info@sheldoninst.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <libfdt.h> -#include <pci.h> -#include <mpc83xx.h> -#include <ns16550.h> -#include <nand.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_NAND_SPL -int checkboard(void) -{ - puts("Board: Sheldon Instruments SIMPC8313\n"); - return 0; -} - -static struct pci_region pci_regions[] = { - { - bus_start: CONFIG_SYS_PCI1_MEM_BASE, - phys_start: CONFIG_SYS_PCI1_MEM_PHYS, - size: CONFIG_SYS_PCI1_MEM_SIZE, - flags: PCI_REGION_MEM | PCI_REGION_PREFETCH - }, - { - bus_start: CONFIG_SYS_PCI1_MMIO_BASE, - phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, - size: CONFIG_SYS_PCI1_MMIO_SIZE, - flags: PCI_REGION_MEM - }, - { - bus_start: CONFIG_SYS_PCI1_IO_BASE, - phys_start: CONFIG_SYS_PCI1_IO_PHYS, - size: CONFIG_SYS_PCI1_IO_SIZE, - flags: PCI_REGION_IO - } -}; - -void pci_init_board(void) -{ - volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; - volatile law83xx_t *pci_law = immr->sysconf.pcilaw; - struct pci_region *reg[] = { pci_regions }; - - /* Enable all 3 PCI_CLK_OUTPUTs. */ - clk->occr |= 0xe0000000; - - /* - * Configure PCI Local Access Windows - */ - pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; - - pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; - - mpc83xx_pci_init(1, reg); -} - -/* - * Miscellaneous late-boot configurations - */ -int misc_init_r(void) -{ - int rc = 0; - immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - fsl_lbc_t *lbus = &immap->im_lbc; - u32 *mxmr = &lbus->mamr; /* Pointer to mamr */ - - /* UPM Table Configuration Code */ - static uint UPMATable[] = { - /* Read Single-Beat (RSS) */ - 0x0fff0c00, 0x0fffdc00, 0x0fff0c05, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - /* Read Burst (RBS) */ - 0x0fff0c00, 0x0ffcdc00, 0x0ffc0c00, 0x0ffc0f0c, - 0x0ffccf0c, 0x0ffc0f0c, 0x0ffcce0c, 0x3ffc0c05, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - /* Write Single-Beat (WSS) */ - 0x0ffc0c00, 0x0ffcdc00, 0x0ffc0c05, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - /* Write Burst (WBS) */ - 0x0ffc0c00, 0x0fffcc0c, 0x0fff0c00, 0x0fffcc00, - 0x0fff1c00, 0x0fffcf0c, 0x0fff0f0c, 0x0fffcf0c, - 0x0fff0c0c, 0x0fffcc0c, 0x0fff0c05, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - /* Refresh Timer (RTS) */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, - /* Exception Condition (EXS) */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 - }; - - upmconfig(UPMA, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); - - /* Set LUPWAIT to be active low and enabled */ - out_be32(mxmr, MxMR_UWPL | MxMR_GPL_x4DIS); - - return rc; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif -} -#endif -#else /* CONFIG_NAND_SPL */ -void board_init_f(ulong bootflag) -{ - NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), - CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); - puts("NAND boot... "); - init_timebase(); - initdram(0); - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd, - CONFIG_SYS_NAND_U_BOOT_RELOC); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - nand_boot(); -} - -void putc(char c) -{ - if (gd->flags & GD_FLG_SILENT) - return; - - if (c == '\n') - NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r'); - - NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c); -} -#endif diff --git a/boards.cfg b/boards.cfg index 37f5f5e..bda1472 100644 --- a/boards.cfg +++ b/boards.cfg @@ -739,8 +739,6 @@ Active powerpc mpc83xx - keymile km83xx Active powerpc mpc83xx - keymile km83xx suvd3 suvd3:SUVD3 Holger Brunck holger.brunck@keymile.com Active powerpc mpc83xx - keymile km83xx tuge1 tuxx1:TUGE1 Holger Brunck holger.brunck@keymile.com Active powerpc mpc83xx - keymile km83xx tuxx1 tuxx1:TUXX1 Holger Brunck holger.brunck@keymile.com -Active powerpc mpc83xx - sheldon simpc8313 SIMPC8313_LP SIMPC8313:NAND_LP Ron Madrid info@sheldoninst.com -Active powerpc mpc83xx - sheldon simpc8313 SIMPC8313_SP SIMPC8313:NAND_SP Ron Madrid info@sheldoninst.com Active powerpc mpc83xx - tqc tqm834x TQM834x - - Active powerpc mpc85xx - - sbc8548 sbc8548 - Paul Gortmaker paul.gortmaker@windriver.com Active powerpc mpc85xx - - sbc8548 sbc8548_PCI_33 sbc8548:PCI,33 Paul Gortmaker paul.gortmaker@windriver.com diff --git a/doc/README.scrapyard b/doc/README.scrapyard index e2157e0..6c6be68 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,16 +11,17 @@ easily if here is something they might want to dig for...

Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -hidden_dragon powerpc mpc824x - - Yusdi Santoso yusdi_santoso@adaptec.com -debris powerpc mpc824x - - Sangmoon Kim dogoil@etinsys.com -kvme080 powerpc mpc824x - - Sangmoon Kim dogoil@etinsys.com -ep8248 powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com -ispan powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com -rattler powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com -zpc1900 powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com -mpc8260ads powerpc mpc8260 - - Yuli Barcohen yuli@arabellasw.com -adder powerpc mpc8xx - - Yuli Barcohen yuli@arabellasw.com -quad100hd powerpc ppc405ep - - Gary Jennejohn gljennjohn@googlemail.com +simpc8313 powerpc mpc83xx - 2014-04-28 Ron Madrid info@sheldoninst.com +hidden_dragon powerpc mpc824x 3fe1a854 2014-05-30 Yusdi Santoso yusdi_santoso@adaptec.com +debris powerpc mpc824x 7edb1f7b 2014-05-30 Sangmoon Kim dogoil@etinsys.com +kvme080 powerpc mpc824x 2868f862 2014-05-30 Sangmoon Kim dogoil@etinsys.com +ep8248 powerpc mpc8260 49ad566d 2014-05-30 Yuli Barcohen yuli@arabellasw.com +ispan powerpc mpc8260 80bae39a 2014-05-30 Yuli Barcohen yuli@arabellasw.com +rattler powerpc mpc8260 d0664db4 2014-05-30 Yuli Barcohen yuli@arabellasw.com +zpc1900 powerpc mpc8260 6f80bb48 2014-05-30 Yuli Barcohen yuli@arabellasw.com +mpc8260ads powerpc mpc8260 facb6725 2014-05-30 Yuli Barcohen yuli@arabellasw.com +adder powerpc mpc8xx 373a9788 2014-05-30 Yuli Barcohen yuli@arabellasw.com +quad100hd powerpc ppc405ep 3569571d 2014-05-30 Gary Jennejohn gljennjohn@googlemail.com lubbock arm pxa 36bf57b 2014-04-18 Kyle Harris kharris@nexus-tech.net EVB64260 powerpc mpc824x bb3aef9 2014-04-18 MOUSSE powerpc mpc824x 03f2ecc 2014-04-18 diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h deleted file mode 100644 index 46157cc..0000000 --- a/include/configs/SIMPC8313.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - * Copyright (C) Sheldon Instruments, Inc. 2008 - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* - * simpc8313 board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_NAND_U_BOOT - -#define CONFIG_E300 1 -#define CONFIG_MPC831x 1 -#define CONFIG_MPC8313 1 - -#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_START 0x00100100 -#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000) - -#define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */ -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 - -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -#define CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_FSL_ELBC 1 - -#define CONFIG_MISC_INIT_R - -/* - * On-board devices - * - * TSEC1 is Marvell PHY 88E1118 - */ - -#define CONFIG_SYS_33MHZ - -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ - -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -#define CONFIG_SYS_IMMR 0xE0000000 - -#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) -#define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00001000 -#define CONFIG_SYS_MEMTEST_END 0x07f00000 - -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ - -/* - * Device configurations - */ -#define CONFIG_TSEC1 - -/* - * DDR Setup - */ - /* DDR is system memory*/ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE - -#define CONFIG_VERY_BIG_RAM -#define CONFIG_MAX_MEM_MAPPED (512 << 20) - -#define CONFIG_SYS_DDRCDR (DDRCDR_EN \ - | DDRCDR_PZ_NOMZ \ - | DDRCDR_NZ_NOMZ \ - | DDRCDR_M_ODR) - /* 0x73000002 TODO ODR & DRN ? */ - -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_NO_FLASH - -#if !defined(CONFIG_NAND_SPL) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ - -/* - * Local Bus LCRR and LBCR regs - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1 -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \ - | (0xFF << LBCR_BMT_SHIFT) \ - | 0xF) /* 0x0004ff0f */ - - /* LB refresh timer prescal, 266MHz/32 */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -/* drivers/mtd/nand/nand.c */ -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_NAND_BASE 0xFFF00000 -#else -#define CONFIG_SYS_NAND_BASE 0xE2800000 -#endif -#define CONFIG_SYS_FPGA_BASE 0xFF000000 - -#define CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_NAND_FSL_ELBC 1 - -#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit Port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ - -#ifdef CONFIG_NAND_SP -#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) -#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */ - /* NAND chip block size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) -#define NAND_CACHE_PAGES 32 -#elif defined(CONFIG_NAND_LP) -#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB \ - | OR_FCM_PGS \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256KB) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 /* NAND chip page size */ - /* NAND chip block size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) -#define NAND_CACHE_PAGES 64 -#else -#error Page size of NAND not defined. -#endif /* CONFIG_NAND_SP */ - -#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SYS_NAND_BLOCK_SIZE - -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM - -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_NAND_BASE - -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR0_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR0_PRELIM - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA_BASE \ - | BR_PS_16 \ - | BR_MS_UPMA \ - | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_2MB \ - | OR_UPM_BCTLD) - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_2MB) - -/* - * JFFS2 configuration - */ -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_DEV "nand0" - -/* mtdparts command line support */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nand0=nand0" -#define MTDPARTS_DEFAULT "mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)" - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#ifdef CONFIG_NAND_SPL -#define CONFIG_NS16550_MIN_FUNCTIONS -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 -#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE -#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ - -/* - * TSEC - */ -#define CONFIG_TSEC_ENET /* TSEC ethernet support */ - -#define CONFIG_GMII /* MII PHY management */ - -#ifdef CONFIG_TSEC1 -#define CONFIG_HAS_ETH0 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define TSEC1_PHY_ADDR 0x0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC1_PHYIDX 0 -#endif - -#ifdef CONFIG_TSEC2 -#define CONFIG_HAS_ETH1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_SYS_TSEC2_OFFSET 0x25000 -#define TSEC2_PHY_ADDR 4 -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC2_PHYIDX 0 -#endif - - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC1" - -/* - * Configure on-board RTC - */ -#define CONFIG_RTC_DS1337 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* - * Environment - */ -#if defined(CONFIG_NAND_U_BOOT) - #define CONFIG_ENV_IS_IN_NAND 1 - #define CONFIG_ENV_OFFSET (768 * 1024) - #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE - #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4) - #define CONFIG_ENV_OFFSET_REDUND \ - (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) -#elif !defined(CONFIG_SYS_RAMBOOT) - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ - #define CONFIG_ENV_SIZE 0x2000 - -/* Address and size of Redundant Environment Sector */ -#else - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_FLASH - -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PCI -#define CONFIG_CMD_JFFS2 - -#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) \ - + 16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ - /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) - -#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ - -#define CONFIG_SYS_HRCW_LOW (HRCWL_LCL_BUS_TO_SCB_CLK_1X1 \ - | 0x20000000 /* reserved */ \ - | HRCWL_DDR_TO_SCB_CLK_2X1 \ - | HRCWL_CSB_TO_CLKIN_4X1 \ - | HRCWL_CORE_TO_CSB_2_5X1) - -#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 4) - -#define CONFIG_SYS_HRCW_HIGH_BASE (HRCWH_PCI_HOST \ - | HRCWH_PCI1_ARBITER_ENABLE \ - | HRCWH_CORE_ENABLE \ - | HRCWH_BOOTSEQ_DISABLE \ - | HRCWH_SW_WATCHDOG_DISABLE \ - | HRCWH_TSEC1M_IN_RGMII \ - | HRCWH_TSEC2M_IN_RGMII \ - | HRCWH_BIG_ENDIAN \ - | HRCWH_LALE_NORMAL) - -#ifdef CONFIG_NAND_LP -#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE \ - | HRCWH_FROM_0XFFF00100 \ - | HRCWH_ROM_LOC_NAND_LP_8BIT \ - | HRCWH_RL_EXT_NAND) -#else -#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE \ - | HRCWH_FROM_0XFFF00100 \ - | HRCWH_ROM_LOC_NAND_SP_8BIT \ - | HRCWH_RL_EXT_NAND) -#endif - -/* System IO Config */ -#define CONFIG_SYS_SICRH (SICRH_ETSEC2_B \ - | SICRH_ETSEC2_C \ - | SICRH_ETSEC2_D \ - | SICRH_ETSEC2_E \ - | SICRH_ETSEC2_F \ - | SICRH_ETSEC2_G \ - | SICRH_TSOBI1 \ - | SICRH_TSOBI2) -#define CONFIG_SYS_SICRL (SICRL_LBC \ - | SICRL_USBDR_10 \ - | SICRL_ETSEC2_A) - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \ - | HID0_ENABLE_INSTRUCTION_CACHE \ - | HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) - -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR @ 0x00000000 */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT1L ((CONFIG_SYS_SDRAM_BASE + 0x10000000) \ - | BATL_PP_RW) -#define CONFIG_SYS_IBAT1U ((CONFIG_SYS_SDRAM_BASE + 0x10000000) \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI @ 0x80000000 */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI2 not supported on 8313 */ -#define CONFIG_SYS_IBAT4L (0) -#define CONFIG_SYS_IBAT4U (0) - -/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 \ - | BATL_PP_RW \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xF0000000 \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_NETDEV "eth1" - -#define CONFIG_HOSTNAME simpc8313 -#define CONFIG_ROOTPATH "/tftpboot/" -#define CONFIG_BOOTFILE "/tftpboot/uImage" - /* U-Boot image on TFTP server */ -#define CONFIG_UBOOTPATH "u-boot-nand.bin" -#define CONFIG_FDTFILE "simpc8313.dtb" - - /* default location for tftp and bootm */ -#define CONFIG_LOADADDR 500000 -#define CONFIG_BOOTDELAY 5 /* 5 second delay */ -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTCOMMAND "nand read $loadaddr kernel 600000;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=" CONFIG_NETDEV "\0" \ - "ethprime=TSEC1\0" \ - "uboot=" CONFIG_UBOOTPATH "\0" \ - "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize\0" \ - "fdtaddr=ae0000\0" \ - "fdtfile=" CONFIG_FDTFILE "\0" \ - "console=ttyS0\0" \ - "setbootargs=setenv bootargs " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ - "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ - "$netdev:off " \ - "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ - "load_uboot=tftp 100000 u-boot-nand.bin\0" \ - "burn_uboot=nand erase u-boot 80000; " \ - "nand write 100000 u-boot $filesize\0" \ - "update_uboot=run load_uboot;run burn_uboot\0" \ - "mtdids=nand0=nand0\0" \ - "mtdparts=mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ - "bootargs=root=/dev/mtdblock2 rootfstype=jffs2 rw " \ - "console=ttyS0,115200\0" \ - "" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv rootdev /dev/nfs;" \ - "run setbootargs;" \ - "run setipargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv rootdev /dev/ram;" \ - "run setbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#endif /* __CONFIG_H */ diff --git a/nand_spl/board/sheldon/simpc8313/Makefile b/nand_spl/board/sheldon/simpc8313/Makefile deleted file mode 100644 index 657f65f..0000000 --- a/nand_spl/board/sheldon/simpc8313/Makefile +++ /dev/null @@ -1,81 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# (C) Copyright 2008 Freescale Semiconductor -# (C) Copyright Sheldon Instruments, Inc. 2008 -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(srctree)/$(src)/config.mk - -nandobj := $(objtree)/nand_spl/ - -LDSCRIPT= $(srctree)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ - $(LDFLAGS) $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o ticks.o -COBJS = nand_boot_fsl_elbc.o $(BOARD).o sdram.o ns16550.o spl_minimal.o \ - time.o cache.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ - -# create symbolic links for common files - -$(obj)/start.S: - @rm -f $@ - ln -s $(srctree)/arch/powerpc/cpu/mpc83xx/start.S $@ - -$(obj)/nand_boot_fsl_elbc.c: - @rm -f $@ - ln -s $(srctree)/nand_spl/nand_boot_fsl_elbc.c $@ - -$(obj)/sdram.c: - @rm -f $@ - ln -s $(srctree)/board/$(BOARDDIR)/sdram.c $@ - -$(obj)/$(BOARD).c: - @rm -f $@ - ln -s $(srctree)/board/$(BOARDDIR)/$(BOARD).c $@ - -$(obj)/ns16550.c: - @rm -f $@ - ln -s $(srctree)/drivers/serial/ns16550.c $@ - -$(obj)/spl_minimal.c: - @rm -f $@ - ln -s $(srctree)/arch/powerpc/cpu/mpc83xx/spl_minimal.c $@ - -$(obj)/cache.c: - @rm -f $@ - ln -s $(srctree)/arch/powerpc/lib/cache.c $@ - -$(obj)/time.c: - @rm -f $@ - ln -s $(srctree)/arch/powerpc/lib/time.c $@ - -$(obj)/ticks.S: - @rm -f $@ - ln -s $(srctree)/arch/powerpc/lib/ticks.S $@ diff --git a/nand_spl/board/sheldon/simpc8313/config.mk b/nand_spl/board/sheldon/simpc8313/config.mk deleted file mode 100644 index d1b4e2e..0000000 --- a/nand_spl/board/sheldon/simpc8313/config.mk +++ /dev/null @@ -1,5 +0,0 @@ -ifdef CONFIG_NAND_LP -PAD_TO = 0xFFF20000 -else -PAD_TO = 0xFFF04000 -endif diff --git a/nand_spl/board/sheldon/simpc8313/u-boot.lds b/nand_spl/board/sheldon/simpc8313/u-boot.lds deleted file mode 100644 index 4e4d511..0000000 --- a/nand_spl/board/sheldon/simpc8313/u-boot.lds +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright 2008 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - . = 0xfff00000; - .text : { - *(.text*) - . = ALIGN(16); - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - . = ALIGN(8); - .data : { - *(.data*) - *(.sdata*) - _GOT2_TABLE_ = .; - *(.got2) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - - . = ALIGN(8); - __bss_start = .; - .bss (NOLOAD) : { *(.*bss) } - __bss_end = .; -} -ENTRY(_start) -ASSERT(__bss_end <= 0xfff01000, "NAND bootstrap too big");

Remove the common infrastructure of nand_spl and clean-up the code inside ifdef(CONFIG_NAND_U_BOOT)..endif.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---

Makefile | 28 +---- arch/powerpc/cpu/ppc4xx/cpu.c | 3 - common/env_embedded.c | 2 +- nand_spl/nand_boot.c | 285 ------------------------------------------ nand_spl/nand_boot_fsl_elbc.c | 142 --------------------- 5 files changed, 2 insertions(+), 458 deletions(-) delete mode 100644 nand_spl/nand_boot.c delete mode 100644 nand_spl/nand_boot_fsl_elbc.c

diff --git a/Makefile b/Makefile index f80cf40..d5a8660 100644 --- a/Makefile +++ b/Makefile @@ -515,12 +515,6 @@ endif

# If there is no specified link script, we look in a number of places for it ifndef LDSCRIPT - ifeq ($(CONFIG_NAND_U_BOOT),y) - LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-nand.lds - ifeq ($(wildcard $(LDSCRIPT)),) - LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-nand.lds - endif - endif ifeq ($(wildcard $(LDSCRIPT)),) LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds endif @@ -742,7 +736,6 @@ endif # Always append ALL so that arch config.mk's can add custom ones ALL-y += u-boot.srec u-boot.bin System.map

-ALL-$(CONFIG_NAND_U_BOOT) += u-boot-nand.bin ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin ifeq ($(CONFIG_SPL_FSL_PBL),y) ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin @@ -1148,23 +1141,6 @@ cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ u-boot.lds: $(LDSCRIPT) prepare FORCE $(call if_changed_dep,cpp_lds)

-PHONY += nand_spl -nand_spl: prepare - $(Q)$(MAKE) $(build)=nand_spl/board/$(BOARDDIR) all - @echo >&2 - @echo >&2 "==================== WARNING =====================" - @echo >&2 "nand_spl will not be included in v2014.07 release." - @echo >&2 "Please switch over to SPL." - @echo >&2 "Otherwise, this board will be removed." - @echo >&2 "==================================================" - @echo >&2 - -nand_spl/u-boot-spl-16k.bin: nand_spl - @: - -u-boot-nand.bin: nand_spl/u-boot-spl-16k.bin u-boot.bin FORCE - $(call if_changed,cat) - spl/u-boot-spl.bin: spl/u-boot-spl @: spl/u-boot-spl: tools prepare @@ -1257,7 +1233,7 @@ CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h \ CLOBBER_DIRS += $(patsubst %,spl/%, $(filter-out Makefile, \ $(shell ls -1 spl 2>/dev/null))) \ tpl -CLOBBER_FILES += u-boot* MLO* SPL System.map nand_spl/u-boot* +CLOBBER_FILES += u-boot* MLO* SPL System.map

# Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config include/generated \ @@ -1290,8 +1266,6 @@ clean: $(clean-dirs) -o -name '*.symtypes' -o -name 'modules.order' \ -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name '*.gcno' ) -type f -print | xargs rm -f - @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ - -path './nand_spl/*' -type l -print | xargs rm -f

# clobber # diff --git a/arch/powerpc/cpu/ppc4xx/cpu.c b/arch/powerpc/cpu/ppc4xx/cpu.c index d1fc7f3..6a48526 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu.c +++ b/arch/powerpc/cpu/ppc4xx/cpu.c @@ -607,9 +607,6 @@ int checkcpu (void) #if defined(SDR0_PINSTP_SHIFT) printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]); printf ("Boot ROM Location %s", bootstrap_str[bootstrap_option()]); -#ifdef CONFIG_NAND_U_BOOT - puts(", booting from NAND"); -#endif /* CONFIG_NAND_U_BOOT */ putc('\n'); #endif /* SDR0_PINSTP_SHIFT */

diff --git a/common/env_embedded.c b/common/env_embedded.c index 1c4f915..56a13cb 100644 --- a/common/env_embedded.c +++ b/common/env_embedded.c @@ -33,7 +33,7 @@ * a seperate section. Note that ENV_CRC is only defined when building * U-Boot itself. */ -#if (defined(CONFIG_SYS_USE_PPCENV) || defined(CONFIG_NAND_U_BOOT)) && \ +#if defined(CONFIG_SYS_USE_PPCENV) && \ defined(ENV_CRC) /* Environment embedded in U-Boot .ppcenv section */ /* XXX - This only works with GNU C */ # define __PPCENV__ __attribute__ ((section(".ppcenv"))) diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c deleted file mode 100644 index 125e7f3..0000000 --- a/nand_spl/nand_boot.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * (C) Copyright 2006-2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <nand.h> -#include <asm/io.h> - -static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS; - -#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ - CONFIG_SYS_NAND_ECCSIZE) -#define ECCTOTAL (ECCSTEPS * CONFIG_SYS_NAND_ECCBYTES) - - -#if (CONFIG_SYS_NAND_PAGE_SIZE <= 512) -/* - * NAND command for small page NAND devices (512) - */ -static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd) -{ - struct nand_chip *this = mtd->priv; - int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; - - while (!this->dev_ready(mtd)) - ; - - /* Begin command latch cycle */ - this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); - /* Set ALE and clear CLE to start address cycle */ - /* Column address */ - this->cmd_ctrl(mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE); - this->cmd_ctrl(mtd, page_addr & 0xff, NAND_CTRL_ALE); /* A[16:9] */ - this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff, - NAND_CTRL_ALE); /* A[24:17] */ -#ifdef CONFIG_SYS_NAND_4_ADDR_CYCLE - /* One more address cycle for devices > 32MiB */ - this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, - NAND_CTRL_ALE); /* A[28:25] */ -#endif - /* Latch in address */ - this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - - /* - * Wait a while for the data to be ready - */ - while (!this->dev_ready(mtd)) - ; - - return 0; -} -#else -/* - * NAND command for large page NAND devices (2k) - */ -static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd) -{ - struct nand_chip *this = mtd->priv; - int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; - void (*hwctrl)(struct mtd_info *mtd, int cmd, - unsigned int ctrl) = this->cmd_ctrl; - - while (!this->dev_ready(mtd)) - ; - - /* Emulate NAND_CMD_READOOB */ - if (cmd == NAND_CMD_READOOB) { - offs += CONFIG_SYS_NAND_PAGE_SIZE; - cmd = NAND_CMD_READ0; - } - - /* Shift the offset from byte addressing to word addressing. */ - if (this->options & NAND_BUSWIDTH_16) - offs >>= 1; - - /* Begin command latch cycle */ - hwctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); - /* Set ALE and clear CLE to start address cycle */ - /* Column address */ - hwctrl(mtd, offs & 0xff, - NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ - hwctrl(mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ - /* Row address */ - hwctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ - hwctrl(mtd, ((page_addr >> 8) & 0xff), - NAND_CTRL_ALE); /* A[27:20] */ -#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE - /* One more address cycle for devices > 128MiB */ - hwctrl(mtd, (page_addr >> 16) & 0x0f, - NAND_CTRL_ALE); /* A[31:28] */ -#endif - /* Latch in address */ - hwctrl(mtd, NAND_CMD_READSTART, - NAND_CTRL_CLE | NAND_CTRL_CHANGE); - hwctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - - /* - * Wait a while for the data to be ready - */ - while (!this->dev_ready(mtd)) - ; - - return 0; -} -#endif - -static int nand_is_bad_block(struct mtd_info *mtd, int block) -{ - struct nand_chip *this = mtd->priv; - - nand_command(mtd, block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB); - - /* - * Read one byte (or two if it's a 16 bit chip). - */ - if (this->options & NAND_BUSWIDTH_16) { - if (readw(this->IO_ADDR_R) != 0xffff) - return 1; - } else { - if (readb(this->IO_ADDR_R) != 0xff) - return 1; - } - - return 0; -} - -#if defined(CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST) -static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) -{ - struct nand_chip *this = mtd->priv; - u_char ecc_calc[ECCTOTAL]; - u_char ecc_code[ECCTOTAL]; - u_char oob_data[CONFIG_SYS_NAND_OOBSIZE]; - int i; - int eccsize = CONFIG_SYS_NAND_ECCSIZE; - int eccbytes = CONFIG_SYS_NAND_ECCBYTES; - int eccsteps = ECCSTEPS; - uint8_t *p = dst; - - nand_command(mtd, block, page, 0, NAND_CMD_READOOB); - this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE); - nand_command(mtd, block, page, 0, NAND_CMD_READ0); - - /* Pick the ECC bytes out of the oob data */ - for (i = 0; i < ECCTOTAL; i++) - ecc_code[i] = oob_data[nand_ecc_pos[i]]; - - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - this->ecc.hwctl(mtd, NAND_ECC_READ); - this->read_buf(mtd, p, eccsize); - this->ecc.calculate(mtd, p, &ecc_calc[i]); - this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); - } - - return 0; -} -#else -static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) -{ - struct nand_chip *this = mtd->priv; - u_char ecc_calc[ECCTOTAL]; - u_char ecc_code[ECCTOTAL]; - u_char oob_data[CONFIG_SYS_NAND_OOBSIZE]; - int i; - int eccsize = CONFIG_SYS_NAND_ECCSIZE; - int eccbytes = CONFIG_SYS_NAND_ECCBYTES; - int eccsteps = ECCSTEPS; - uint8_t *p = dst; - - nand_command(mtd, block, page, 0, NAND_CMD_READ0); - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - this->ecc.hwctl(mtd, NAND_ECC_READ); - this->read_buf(mtd, p, eccsize); - this->ecc.calculate(mtd, p, &ecc_calc[i]); - } - this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE); - - /* Pick the ECC bytes out of the oob data */ - for (i = 0; i < ECCTOTAL; i++) - ecc_code[i] = oob_data[nand_ecc_pos[i]]; - - eccsteps = ECCSTEPS; - p = dst; - - for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - /* No chance to do something with the possible error message - * from correct_data(). We just hope that all possible errors - * are corrected by this routine. - */ - this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); - } - - return 0; -} -#endif /* #if defined(CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST) */ - -static int nand_load(struct mtd_info *mtd, unsigned int offs, - unsigned int uboot_size, uchar *dst) -{ - unsigned int block, lastblock; - unsigned int page; - - /* - * offs has to be aligned to a page address! - */ - block = offs / CONFIG_SYS_NAND_BLOCK_SIZE; - lastblock = (offs + uboot_size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE; - page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE; - - while (block <= lastblock) { - if (!nand_is_bad_block(mtd, block)) { - /* - * Skip bad blocks - */ - while (page < CONFIG_SYS_NAND_PAGE_COUNT) { - nand_read_page(mtd, block, page, dst); - dst += CONFIG_SYS_NAND_PAGE_SIZE; - page++; - } - - page = 0; - } else { - lastblock++; - } - - block++; - } - - return 0; -} - -/* - * The main entry for NAND booting. It's necessary that SDRAM is already - * configured and available since this code loads the main U-Boot image - * from NAND into SDRAM and starts it from there. - */ -void nand_boot(void) -{ - struct nand_chip nand_chip; - nand_info_t nand_info; - __attribute__((noreturn)) void (*uboot)(void); - - /* - * Init board specific nand support - */ - nand_chip.select_chip = NULL; - nand_info.priv = &nand_chip; - nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE; - nand_chip.dev_ready = NULL; /* preset to NULL */ - nand_chip.options = 0; - board_nand_init(&nand_chip); - - if (nand_chip.select_chip) - nand_chip.select_chip(&nand_info, 0); - - /* - * Load U-Boot image from NAND into RAM - */ - nand_load(&nand_info, CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, - (uchar *)CONFIG_SYS_NAND_U_BOOT_DST); - -#ifdef CONFIG_NAND_ENV_DST - nand_load(&nand_info, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (uchar *)CONFIG_NAND_ENV_DST); - -#ifdef CONFIG_ENV_OFFSET_REDUND - nand_load(&nand_info, CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, - (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); -#endif -#endif - - if (nand_chip.select_chip) - nand_chip.select_chip(&nand_info, -1); - - /* - * Jump to U-Boot image - */ - uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; - (*uboot)(); -} diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c deleted file mode 100644 index 1afa1a2..0000000 --- a/nand_spl/nand_boot_fsl_elbc.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * NAND boot for Freescale Enhanced Local Bus Controller, Flash Control Machine - * - * (C) Copyright 2006-2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * Copyright (c) 2008 Freescale Semiconductor, Inc. - * Author: Scott Wood scottwood@freescale.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/fsl_lbc.h> -#include <linux/mtd/nand.h> - -#define WINDOW_SIZE 8192 - -static void nand_wait(void) -{ - fsl_lbc_t *regs = LBC_BASE_ADDR; - - for (;;) { - uint32_t status = in_be32(&regs->ltesr); - - if (status == 1) - return; - - if (status & 1) { - puts("read failed (ltesr)\n"); - for (;;); - } - } -} - -static void nand_load(unsigned int offs, int uboot_size, uchar *dst) -{ - fsl_lbc_t *regs = LBC_BASE_ADDR; - uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; - const int large = CONFIG_SYS_NAND_OR_PRELIM & OR_FCM_PGS; - const int block_shift = large ? 17 : 14; - const int block_size = 1 << block_shift; - const int page_size = large ? 2048 : 512; - const int bad_marker = large ? page_size + 0 : page_size + 5; - int fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT) | 2; - int pos = 0; - - if (offs & (block_size - 1)) { - puts("bad offset\n"); - for (;;); - } - - if (large) { - fmr |= FMR_ECCM; - __raw_writel((NAND_CMD_READ0 << FCR_CMD0_SHIFT) | - (NAND_CMD_READSTART << FCR_CMD1_SHIFT), - &regs->fcr); - __raw_writel( - (FIR_OP_CW0 << FIR_OP0_SHIFT) | - (FIR_OP_CA << FIR_OP1_SHIFT) | - (FIR_OP_PA << FIR_OP2_SHIFT) | - (FIR_OP_CW1 << FIR_OP3_SHIFT) | - (FIR_OP_RBW << FIR_OP4_SHIFT), - &regs->fir); - } else { - __raw_writel(NAND_CMD_READ0 << FCR_CMD0_SHIFT, &regs->fcr); - __raw_writel( - (FIR_OP_CW0 << FIR_OP0_SHIFT) | - (FIR_OP_CA << FIR_OP1_SHIFT) | - (FIR_OP_PA << FIR_OP2_SHIFT) | - (FIR_OP_RBW << FIR_OP3_SHIFT), - &regs->fir); - } - - __raw_writel(0, &regs->fbcr); - - while (pos < uboot_size) { - int i = 0; - __raw_writel(offs >> block_shift, &regs->fbar); - - do { - int j; - unsigned int page_offs = (offs & (block_size - 1)) << 1; - - __raw_writel(~0, &regs->ltesr); - __raw_writel(0, &regs->lteatr); - __raw_writel(page_offs, &regs->fpar); - __raw_writel(fmr, &regs->fmr); - sync(); - __raw_writel(0, &regs->lsor); - nand_wait(); - - page_offs %= WINDOW_SIZE; - - /* - * If either of the first two pages are marked bad, - * continue to the next block. - */ - if (i++ < 2 && buf[page_offs + bad_marker] != 0xff) { - puts("skipping\n"); - offs = (offs + block_size) & ~(block_size - 1); - pos &= ~(block_size - 1); - break; - } - - for (j = 0; j < page_size; j++) - dst[pos + j] = buf[page_offs + j]; - - pos += page_size; - offs += page_size; - } while ((offs & (block_size - 1)) && (pos < uboot_size)); - } -} - -/* - * The main entry for NAND booting. It's necessary that SDRAM is already - * configured and available since this code loads the main U-Boot image - * from NAND into SDRAM and starts it from there. - */ -void nand_boot(void) -{ - __attribute__((noreturn)) void (*uboot)(void); - - /* - * Load U-Boot image from NAND into RAM - */ - nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, - (uchar *)CONFIG_SYS_NAND_U_BOOT_DST); - - /* - * Jump to U-Boot image - */ - puts("transfering control\n"); - /* - * Clean d-cache and invalidate i-cache, to - * make sure that no stale data is executed. - */ - flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE); - uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; - uboot(); -}