There is an option to enable the board detection for TI platforms. If this is option is not set, there is no reason to set the EEPROM bus address or chip address.

This patch makes both EEPROM_BUS_ADDRESS and EEPROM_CHIP_ADDRESS depend on TI_I2C_BOARD_DETECT.

Signed-off-by: Adam Ford aford173@gmail.com

diff --git a/board/ti/common/Kconfig b/board/ti/common/Kconfig index b1956b8100..9ead7ca038 100644 --- a/board/ti/common/Kconfig +++ b/board/ti/common/Kconfig @@ -8,11 +8,13 @@ config EEPROM_BUS_ADDRESS int "Board EEPROM's I2C bus address" range 0 8 default 0 + depends on TI_I2C_BOARD_DETECT

config EEPROM_CHIP_ADDRESS hex "Board EEPROM's I2C chip address" range 0 0xff default 0x50 + depends on TI_I2C_BOARD_DETECT

config TI_COMMON_CMD_OPTIONS bool "Enable cmd options on TI platforms"