The Zynq-7000 APSOC zc702 and zc706 enabled complte embedded processing includes ASIC and FPGA design.

ZC702-:

APSOC: - XC7Z020-CLG484-1 Memory: - DDR3 Component Memory 1GB - 16MB Quad SPI Flash - IIC - 1 KB EEPROM Connectivity: - Gigabit Ethernet GMII, RGMII and SGMII. - USB OTG - Host USB - IIC Bus Headers/HUB - 1 CAN with Wake on CAN - USB-UART Video/Display: - HDMI Video OUT - 8X LEDs Control & I/O: - 3 User Push Buttons - 2 User Switches - 8 User LEDs

For more info on zc702 board: - http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm

ZC706-:

APSOC: - XC7Z045 FFG900 -2 AP SoC Memory: - DDR3 Component Memory 1GB (PS) - DDR3 SODIM Memory 1GB (PL) - 2X16MB Quad SPI Flash (dual parallel) - IIC - 1 KB EEPROM Connectivity: - PCIe Gen2x4 - SFP+ and SMA Pairs - GigE RGMII Ethernet (PS) - USB OTG 1 (PS) - Host USB - IIC Bus Headers/HUB (PS) - 1 CAN with Wake on CAN (PS) - USB-UART Video/Display: - HDMI 8 color RGB 4.4.4 1080P-60 OUT - HDMI IN 8 color RGB 4.4.4 Control & I/O: - 2 User Push Buttons/Dip Switch, 2 User LEDs - IIC access to GPIO - SDIO (SD Card slot) - 3 User Push Buttons, 2 User Switches, 8 User LEDs

For more info on zc706 board: - http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm

Signed-off-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com --- V2: Updated domain name in mail ids'

boards.cfg | 1 + include/configs/zynq-common.h | 9 --------- include/configs/zynq_zc70x.h | 26 ++++++++++++++++++++++++++ 3 files changed, 27 insertions(+), 9 deletions(-) create mode 100644 include/configs/zynq_zc70x.h

diff --git a/boards.cfg b/boards.cfg index 570d141..9f0374f 100644 --- a/boards.cfg +++ b/boards.cfg @@ -354,6 +354,7 @@ Active arm armv7 socfpga altera socfpga Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier mathieu.poirier@linaro.org Active arm armv7 u8500 st-ericsson u8500 u8500_href - - Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang b18965@freescale.com +Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek monstr@monstr.eu:Jagannadha Sutradharudu Teki jaganna@xilinx.com Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren twarren@nvidia.com Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Thierry Reding thierry.reding@avionic-design.de Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Thierry Reding thierry.reding@avionic-design.de diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index e6990ea..4896232 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -36,7 +36,6 @@ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

/* Zynq Serial driver */ -#define CONFIG_ZYNQ_SERIAL_UART1 #ifdef CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000 # define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE @@ -60,8 +59,6 @@ #endif

/* Ethernet driver */ -#define CONFIG_ZYNQ_GEM0 -#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) # define CONFIG_NET_MULTI # define CONFIG_ZYNQ_GEM @@ -71,7 +68,6 @@ # define CONFIG_PHY_MARVELL #endif

-#define CONFIG_ZYNQ_SPI /* SPI */ #ifdef CONFIG_ZYNQ_SPI # define CONFIG_SPI_FLASH @@ -89,10 +85,6 @@ # define CONFIG_SPI_FLASH_WINBOND #endif

-/* NOR */ -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_ZYNQ_SDHCI0 /* MMC */ #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) # define CONFIG_MMC @@ -106,7 +98,6 @@ # define CONFIG_DOS_PARTITION #endif

-#define CONFIG_ZYNQ_I2C0 /* I2C */ #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) # define CONFIG_CMD_I2C diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h new file mode 100644 index 0000000..559cd19 --- /dev/null +++ b/include/configs/zynq_zc70x.h @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2013 Xilinx, Inc. + * + * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards + * See zynq_common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_ZC70X_H +#define __CONFIG_ZYNQ_ZC70X_H + +#define CONFIG_ZYNQ_SERIAL_UART1 +#define CONFIG_ZYNQ_GEM0 +#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ZYNQ_QSPI +#define CONFIG_ZYNQ_SDHCI0 +#define CONFIG_ZYNQ_I2C0 +#define CONFIG_ZYNQ_BOOT_FREEBSD + +#include <configs/zynq-common.h> + +#endif /* __CONFIG_ZYNQ_ZC70X_H */