[PATCH] configs: ls1043aqds: Configure QSPI related configs
LS1043A-QDS has "s25fl128s" flash of size 16M with 64K sector size. The board requires few spi-flash related configs to be updated in TFA and QSPI _defconfigs.
Following are the changes: - Define/Update CONFIG_ENV_ADDR - Unset CONFIG_SPI_FLASH_BAR - Correct CONFIG_ENV_SECT_SIZE - Enable CONFIG_SYS_RELOC_GD_ENV_ADDR
Signed-off-by: Kuldeep Singh kuldeep.singh@nxp.com --- configs/ls1043aqds_qspi_defconfig | 1 + configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1043aqds_tfa_defconfig | 3 ++- 3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig index a018b22..bb92b4c 100644 --- a/configs/ls1043aqds_qspi_defconfig +++ b/configs/ls1043aqds_qspi_defconfig @@ -35,6 +35,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_sy CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_ADDR=0x40300000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig index 3ee5d28..a9d7131 100644 --- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig @@ -48,6 +48,7 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 +# CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig index 297788b..eb1f905 100644 --- a/configs/ls1043aqds_tfa_defconfig +++ b/configs/ls1043aqds_tfa_defconfig @@ -4,7 +4,7 @@ CONFIG_TFABOOT=y CONFIG_SYS_TEXT_BASE=0x82000000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x500000 -CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DM_GPIO=y CONFIG_NR_DRAM_BANKS=2 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y @@ -43,6 +43,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=0 CONFIG_ENV_ADDR=0x60500000 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y
-----Original Message----- From: U-Boot u-boot-bounces@lists.denx.de On Behalf Of Kuldeep Singh Sent: Thursday, June 11, 2020 12:13 PM To: u-boot@lists.denx.de Cc: Priyanka Jain priyanka.jain@nxp.com; Kuldeep Singh kuldeep.singh@nxp.com Subject: [PATCH] configs: ls1043aqds: Configure QSPI related configs
LS1043A-QDS has "s25fl128s" flash of size 16M with 64K sector size. The board requires few spi-flash related configs to be updated in TFA and QSPI _defconfigs.
Following are the changes:
- Define/Update CONFIG_ENV_ADDR
- Unset CONFIG_SPI_FLASH_BAR
- Correct CONFIG_ENV_SECT_SIZE
- Enable CONFIG_SYS_RELOC_GD_ENV_ADDR
Signed-off-by: Kuldeep Singh kuldeep.singh@nxp.com
configs/ls1043aqds_qspi_defconfig | 1 + configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 1 + configs/ls1043aqds_tfa_defconfig | 3 ++- 3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig index a018b22..bb92b4c 100644 --- a/configs/ls1043aqds_qspi_defconfig +++ b/configs/ls1043aqds_qspi_defconfig @@ -35,6 +35,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=spi0.0:1m(uboot),5m(kernel),1m(d tb),9m(file_sy CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_ADDR=0x40300000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig index 3ee5d28..a9d7131 100644 --- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig @@ -48,6 +48,7 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 +# CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig index 297788b..eb1f905 100644 --- a/configs/ls1043aqds_tfa_defconfig +++ b/configs/ls1043aqds_tfa_defconfig @@ -4,7 +4,7 @@ CONFIG_TFABOOT=y CONFIG_SYS_TEXT_BASE=0x82000000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x500000 -CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_DM_GPIO=y CONFIG_NR_DRAM_BANKS=2 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y @@ -43,6 +43,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=0 CONFIG_ENV_ADDR=0x60500000 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Please confirm that all boot-sources will work fine with this change.
Regards Priyanka <snip>
-----Original Message----- From: U-Boot u-boot-bounces@lists.denx.de On Behalf Of Kuldeep Singh Sent: Thursday, July 23, 2020 11:02 AM To: Priyanka Jain (OSS) priyanka.jain@oss.nxp.com; u-boot@lists.denx.de Subject: RE: [PATCH] configs: ls1043aqds: Configure QSPI related configs
[...]
Please confirm that all boot-sources will work fine with this change.
Please hold both the patches for a moment. I will test other boot sources and will let you know the results.
Any update?
Regards Priyanka
-----Original Message----- From: Priyanka Jain priyanka.jain@nxp.com Sent: Friday, October 23, 2020 9:22 AM To: Kuldeep Singh kuldeep.singh@nxp.com; Priyanka Jain (OSS) priyanka.jain@oss.nxp.com; u-boot@lists.denx.de Subject: RE: [PATCH] configs: ls1043aqds: Configure QSPI related configs
-----Original Message----- From: U-Boot u-boot-bounces@lists.denx.de On Behalf Of Kuldeep Singh Sent: Thursday, July 23, 2020 11:02 AM To: Priyanka Jain (OSS) priyanka.jain@oss.nxp.com; u-boot@lists.denx.de Subject: RE: [PATCH] configs: ls1043aqds: Configure QSPI related configs
[...]
Please confirm that all boot-sources will work fine with this change.
Please hold both the patches for a moment. I will test other boot sources and will let you know the results.
Any update?
This seems to be a generalized problem and needs to be fixed in u-boot env. I will work on it and provide the fix soon.
participants (3)
-
Kuldeep Singh -
Priyanka Jain -
Priyanka Jain (OSS)