These are header files used by ARC700 architecture.

Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c".

Signed-off-by: Alexey Brodkin abrodkin@synopsys.com

Cc: Vineet Gupta vgupta@synopsys.com Cc: Francois Bedard fbedard@synopsys.com Cc: Wolfgang Denk wd@denx.de Cc: Heiko Schocher hs@denx.de --- No changes for v4.

arch/arc/include/asm/arch-arc700/hardware.h | 10 ++ arch/arc/include/asm/arcregs.h | 55 +++++++ arch/arc/include/asm/bitops.h | 19 +++ arch/arc/include/asm/byteorder.h | 23 +++ arch/arc/include/asm/cache.h | 23 +++ arch/arc/include/asm/config.h | 12 ++ arch/arc/include/asm/errno.h | 1 + arch/arc/include/asm/global_data.h | 19 +++ arch/arc/include/asm/io.h | 218 ++++++++++++++++++++++++++++ arch/arc/include/asm/posix_types.h | 39 +++++ arch/arc/include/asm/ptrace.h | 50 +++++++ arch/arc/include/asm/sections.h | 14 ++ arch/arc/include/asm/string.h | 27 ++++ arch/arc/include/asm/types.h | 55 +++++++ arch/arc/include/asm/u-boot-arc.h | 12 ++ arch/arc/include/asm/u-boot.h | 15 ++ arch/arc/include/asm/unaligned.h | 1 + 17 files changed, 593 insertions(+) create mode 100644 arch/arc/include/asm/arch-arc700/hardware.h create mode 100644 arch/arc/include/asm/arcregs.h create mode 100644 arch/arc/include/asm/bitops.h create mode 100644 arch/arc/include/asm/byteorder.h create mode 100644 arch/arc/include/asm/cache.h create mode 100644 arch/arc/include/asm/config.h create mode 100644 arch/arc/include/asm/errno.h create mode 100644 arch/arc/include/asm/global_data.h create mode 100644 arch/arc/include/asm/io.h create mode 100644 arch/arc/include/asm/posix_types.h create mode 100644 arch/arc/include/asm/ptrace.h create mode 100644 arch/arc/include/asm/sections.h create mode 100644 arch/arc/include/asm/string.h create mode 100644 arch/arc/include/asm/types.h create mode 100644 arch/arc/include/asm/u-boot-arc.h create mode 100644 arch/arc/include/asm/u-boot.h create mode 100644 arch/arc/include/asm/unaligned.h

diff --git a/arch/arc/include/asm/arch-arc700/hardware.h b/arch/arc/include/asm/arch-arc700/hardware.h new file mode 100644 index 0000000..8ec13a8 --- /dev/null +++ b/arch/arc/include/asm/arch-arc700/hardware.h @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This file is only required to allow compilation of "designware_i2c" driver. + * Which explicitly includes <asm/arch/hardware.h>. + */ diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h new file mode 100644 index 0000000..5d48d11 --- /dev/null +++ b/arch/arc/include/asm/arcregs.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARC_ARCREGS_H +#define _ASM_ARC_ARCREGS_H + +/* + * ARC architecture has additional address space - auxiliary registers. + * These registers are mostly used for configuration purposes. + * These registers are not memory mapped and special commands are used for + * access: "lr"/"sr". + */ + +#define ARC_AUX_IDENTITY 0x04 +#define ARC_AUX_STATUS32 0x0a + +/* Instruction cache related auxiliary registers */ +#define ARC_AUX_IC_IVIC 0x10 +#define ARC_AUX_IC_CTRL 0x11 +#define ARC_AUX_IC_IVIL 0x19 +#if (CONFIG_ARC_MMU_VER > 2) +#define ARC_AUX_IC_PTAG 0x1E +#endif + +/* Timer related auxiliary registers */ +#define ARC_AUX_TIMER0_CNT 0x21 /* Timer 0 count */ +#define ARC_AUX_TIMER0_CTRL 0x22 /* Timer 0 control */ +#define ARC_AUX_TIMER0_LIMIT 0x23 /* Timer 0 limit */ + +#define ARC_AUX_INTR_VEC_BASE 0x25 + +/* Data cache related auxiliary registers */ +#define ARC_AUX_DC_IVDC 0x47 +#define ARC_AUX_DC_CTRL 0x48 + +#define ARC_AUX_DC_IVDL 0x4A +#define ARC_AUX_DC_FLSH 0x4B +#define ARC_AUX_DC_FLDL 0x4C +#if (CONFIG_ARC_MMU_VER > 2) +#define ARC_AUX_DC_PTAG 0x5C +#endif + +#ifndef __ASSEMBLY__ +/* Accessors for auxiliary registers */ +#define read_aux_reg(reg) __builtin_arc_lr(reg) + +/* gcc builtin sr needs reg param to be long immediate */ +#define write_aux_reg(reg_immed, val) \ + __builtin_arc_sr((unsigned int)val, reg_immed) +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_ARC_ARCREGS_H */ diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h new file mode 100644 index 0000000..85721aa --- /dev/null +++ b/arch/arc/include/asm/bitops.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_BITOPS_H +#define __ASM_ARC_BITOPS_H + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ + +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +#endif /* __ASM_ARC_BITOPS_H */ diff --git a/arch/arc/include/asm/byteorder.h b/arch/arc/include/asm/byteorder.h new file mode 100644 index 0000000..2fa9776 --- /dev/null +++ b/arch/arc/include/asm/byteorder.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_BYTEORDER_H +#define __ASM_ARC_BYTEORDER_H + +#include <asm/types.h> + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) + #define __BYTEORDER_HAS_U64__ + #define __SWAB_64_THRU_32__ +#endif + +#ifdef __LITTLE_ENDIAN__ + #include <linux/byteorder/little_endian.h> +#else + #include <linux/byteorder/big_endian.h> +#endif /* CONFIG_SYS_BIG_ENDIAN */ + +#endif /* ASM_ARC_BYTEORDER_H */ diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h new file mode 100644 index 0000000..16e7568 --- /dev/null +++ b/arch/arc/include/asm/cache.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_CACHE_H +#define __ASM_ARC_CACHE_H + +#include <config.h> + +/* + * The current upper bound for ARC L1 data cache line sizes is 128 bytes. + * We use that value for aligning DMA buffers unless the board config has + * specified an alternate cache line size. + */ +#ifdef CONFIG_SYS_CACHELINE_SIZE +#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE +#else +#define ARCH_DMA_MINALIGN 128 +#endif + +#endif /* __ASM_ARC_CACHE_H */ diff --git a/arch/arc/include/asm/config.h b/arch/arc/include/asm/config.h new file mode 100644 index 0000000..5761def --- /dev/null +++ b/arch/arc/include/asm/config.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_CONFIG_H_ +#define __ASM_ARC_CONFIG_H_ + +#define CONFIG_LMB + +#endif /*__ASM_ARC_CONFIG_H_ */ diff --git a/arch/arc/include/asm/errno.h b/arch/arc/include/asm/errno.h new file mode 100644 index 0000000..4c82b50 --- /dev/null +++ b/arch/arc/include/asm/errno.h @@ -0,0 +1 @@ +#include <asm-generic/errno.h> diff --git a/arch/arc/include/asm/global_data.h b/arch/arc/include/asm/global_data.h new file mode 100644 index 0000000..d644e80 --- /dev/null +++ b/arch/arc/include/asm/global_data.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_GLOBAL_DATA_H +#define __ASM_ARC_GLOBAL_DATA_H + +/* Architecture-specific global data */ +struct arch_global_data { + int running_on_hw; +}; + +#include <asm-generic/global_data.h> + +#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r25") + +#endif /* __ASM_ARC_GLOBAL_DATA_H */ diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h new file mode 100644 index 0000000..24b7337 --- /dev/null +++ b/arch/arc/include/asm/io.h @@ -0,0 +1,218 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_IO_H +#define __ASM_ARC_IO_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +static inline void sync(void) +{ + /* Not yet implemented */ +} + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + u8 b; + + __asm__ __volatile__("ldb%U1 %0, %1\n" + : "=r" (b) + : "m" (*(volatile u8 __force *)addr) + : "memory"); + return b; +} + +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + u16 s; + + __asm__ __volatile__("ldw%U1 %0, %1\n" + : "=r" (s) + : "m" (*(volatile u16 __force *)addr) + : "memory"); + return s; +} + +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + u32 w; + + __asm__ __volatile__("ld%U1 %0, %1\n" + : "=r" (w) + : "m" (*(volatile u32 __force *)addr) + : "memory"); + return w; +} + +#define readb __raw_readb + +static inline u16 readw(const volatile void __iomem *addr) +{ + return __le16_to_cpu(__raw_readw(addr)); +} + +static inline u32 readl(const volatile void __iomem *addr) +{ + return __le32_to_cpu(__raw_readl(addr)); +} + +static inline void __raw_writeb(u8 b, volatile void __iomem *addr) +{ + __asm__ __volatile__("stb%U1 %0, %1\n" + : + : "r" (b), "m" (*(volatile u8 __force *)addr) + : "memory"); +} + +static inline void __raw_writew(u16 s, volatile void __iomem *addr) +{ + __asm__ __volatile__("stw%U1 %0, %1\n" + : + : "r" (s), "m" (*(volatile u16 __force *)addr) + : "memory"); +} + +static inline void __raw_writel(u32 w, volatile void __iomem *addr) +{ + __asm__ __volatile__("st%U1 %0, %1\n" + : + : "r" (w), "m" (*(volatile u32 __force *)addr) + : "memory"); +} + +#define writeb __raw_writeb +#define writew(b, addr) __raw_writew(__cpu_to_le16(b), addr) +#define writel(b, addr) __raw_writel(__cpu_to_le32(b), addr) + +static inline int __raw_readsb(unsigned int addr, void *data, int bytelen) +{ + __asm__ __volatile__ ("1:ld.di r8, [r0]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "stb.ab r8, [r1, 1]\n" + : + : "r" (addr), "r" (data), "r" (bytelen) + : "r8"); + return bytelen; +} + +static inline int __raw_readsw(unsigned int addr, void *data, int wordlen) +{ + __asm__ __volatile__ ("1:ld.di r8, [r0]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "stw.ab r8, [r1, 2]\n" + : + : "r" (addr), "r" (data), "r" (wordlen) + : "r8"); + return wordlen; +} + +static inline int __raw_readsl(unsigned int addr, void *data, int longlen) +{ + __asm__ __volatile__ ("1:ld.di r8, [r0]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "st.ab r8, [r1, 4]\n" + : + : "r" (addr), "r" (data), "r" (longlen) + : "r8"); + return longlen; +} + +static inline int __raw_writesb(unsigned int addr, void *data, int bytelen) +{ + __asm__ __volatile__ ("1:ldb.ab r8, [r1, 1]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "st.di r8, [r0, 0]\n" + : + : "r" (addr), "r" (data), "r" (bytelen) + : "r8"); + return bytelen; +} + +static inline int __raw_writesw(unsigned int addr, void *data, int wordlen) +{ + __asm__ __volatile__ ("1:ldw.ab r8, [r1, 2]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "st.ab.di r8, [r0, 0]\n" + : + : "r" (addr), "r" (data), "r" (wordlen) + : "r8"); + return wordlen; +} + +static inline int __raw_writesl(unsigned int addr, void *data, int longlen) +{ + __asm__ __volatile__ ("1:ld.ab r8, [r1, 4]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "st.ab.di r8, [r0, 0]\n" + : + : "r" (addr), "r" (data), "r" (longlen) + : "r8"); + return longlen; +} + +#define out_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a) +#define in_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a)) + +#define out_le32(a, v) out_arch(l, le32, a, v) +#define out_le16(a, v) out_arch(w, le16, a, v) + +#define in_le32(a) in_arch(l, le32, a) +#define in_le16(a) in_arch(w, le16, a) + +#define out_be32(a, v) out_arch(l, be32, a, v) +#define out_be16(a, v) out_arch(w, be16, a, v) + +#define in_be32(a) in_arch(l, be32, a) +#define in_be16(a) in_arch(w, be16, a) + +#define out_8(a, v) __raw_writeb(v, a) +#define in_8(a) __raw_readb(a) + +/* + * Clear and set bits in one shot. These macros can be used to clear and + * set multiple bits in a register using a single call. These macros can + * also be used to set a multiple-bit bit pattern using a mask, by + * specifying the mask in the 'clear' parameter and the new bit pattern + * in the 'set' parameter. + */ + +#define clrbits(type, addr, clear) \ + out_##type((addr), in_##type(addr) & ~(clear)) + +#define setbits(type, addr, set) \ + out_##type((addr), in_##type(addr) | (set)) + +#define clrsetbits(type, addr, clear, set) \ + out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) + +#define clrbits_be32(addr, clear) clrbits(be32, addr, clear) +#define setbits_be32(addr, set) setbits(be32, addr, set) +#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) + +#define clrbits_le32(addr, clear) clrbits(le32, addr, clear) +#define setbits_le32(addr, set) setbits(le32, addr, set) +#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) + +#define clrbits_be16(addr, clear) clrbits(be16, addr, clear) +#define setbits_be16(addr, set) setbits(be16, addr, set) +#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) + +#define clrbits_le16(addr, clear) clrbits(le16, addr, clear) +#define setbits_le16(addr, set) setbits(le16, addr, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) + +#define clrbits_8(addr, clear) clrbits(8, addr, clear) +#define setbits_8(addr, set) setbits(8, addr, set) +#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) + +#endif /* __ASM_ARC_IO_H */ diff --git a/arch/arc/include/asm/posix_types.h b/arch/arc/include/asm/posix_types.h new file mode 100644 index 0000000..20415f0 --- /dev/null +++ b/arch/arc/include/asm/posix_types.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_POSIX_TYPES_H +#define __ASM_ARC_POSIX_TYPES_H + +typedef unsigned short __kernel_dev_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_daddr_t; +typedef char *__kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +#endif /* __ASM_ARC_POSIX_TYPES_H */ diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h new file mode 100644 index 0000000..8f73b31 --- /dev/null +++ b/arch/arc/include/asm/ptrace.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_PTRACE_H +#define __ASM_ARC_PTRACE_H + +struct pt_regs { + long bta; + long lp_start; + long lp_end; + long lp_count; + long status32; + long ret; + long blink; + long fp; + long r26; /* gp */ + long r25; + long r24; + long r23; + long r22; + long r21; + long r20; + long r19; + long r18; + long r17; + long r16; + long r15; + long r14; + long r13; + long r12; + long r11; + long r10; + long r9; + long r8; + long r7; + long r6; + long r5; + long r4; + long r3; + long r2; + long r1; + long r0; + long sp; + long ecr; +}; + +#endif /* __ASM_ARC_PTRACE_H */ diff --git a/arch/arc/include/asm/sections.h b/arch/arc/include/asm/sections.h new file mode 100644 index 0000000..18484a1 --- /dev/null +++ b/arch/arc/include/asm/sections.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_SECTIONS_H +#define __ASM_ARC_SECTIONS_H + +#include <asm-generic/sections.h> + +extern ulong __text_end; + +#endif /* __ASM_ARC_SECTIONS_H */ diff --git a/arch/arc/include/asm/string.h b/arch/arc/include/asm/string.h new file mode 100644 index 0000000..909129c --- /dev/null +++ b/arch/arc/include/asm/string.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_STRING_H +#define __ASM_ARC_STRING_H + +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMCMP +#define __HAVE_ARCH_STRCHR +#define __HAVE_ARCH_STRCPY +#define __HAVE_ARCH_STRCMP +#define __HAVE_ARCH_STRLEN + +extern void *memset(void *ptr, int, __kernel_size_t); +extern void *memcpy(void *, const void *, __kernel_size_t); +extern void memzero(void *ptr, __kernel_size_t n); +extern int memcmp(const void *, const void *, __kernel_size_t); +extern char *strchr(const char *s, int c); +extern char *strcpy(char *dest, const char *src); +extern int strcmp(const char *cs, const char *ct); +extern __kernel_size_t strlen(const char *); + +#endif /* __ASM_ARC_STRING_H */ diff --git a/arch/arc/include/asm/types.h b/arch/arc/include/asm/types.h new file mode 100644 index 0000000..24eeb76 --- /dev/null +++ b/arch/arc/include/asm/types.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_TYPES_H +#define __ASM_ARC_TYPES_H + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +#define BITS_PER_LONG 32 + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +typedef unsigned long phys_addr_t; +typedef unsigned long phys_size_t; + +#endif /* __ASM_ARC_TYPES_H */ diff --git a/arch/arc/include/asm/u-boot-arc.h b/arch/arc/include/asm/u-boot-arc.h new file mode 100644 index 0000000..0c0e8e6 --- /dev/null +++ b/arch/arc/include/asm/u-boot-arc.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_U_BOOT_ARC_H__ +#define __ASM_ARC_U_BOOT_ARC_H__ + +int arch_early_init_r(void); + +#endif /* __ASM_ARC_U_BOOT_ARC_H__ */ diff --git a/arch/arc/include/asm/u-boot.h b/arch/arc/include/asm/u-boot.h new file mode 100644 index 0000000..e354edf --- /dev/null +++ b/arch/arc/include/asm/u-boot.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_U_BOOT_H__ +#define __ASM_ARC_U_BOOT_H__ + +#include <asm-generic/u-boot.h> + +/* For image.h:image_check_target_arch() */ +#define IH_ARCH_DEFAULT IH_ARCH_ARC + +#endif /* __ASM_ARC_U_BOOT_H__ */ diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h new file mode 100644 index 0000000..6cecbbb --- /dev/null +++ b/arch/arc/include/asm/unaligned.h @@ -0,0 +1 @@ +#include <asm-generic/unaligned.h>

These are library functions used by ARC700 architecture.

Signed-off-by: Alexey Brodkin abrodkin@synopsys.com

Cc: Vineet Gupta vgupta@synopsys.com Cc: Francois Bedard fbedard@synopsys.com Cc: Wolfgang Denk wd@denx.de Cc: Heiko Schocher hs@denx.de --- No changes for v4.

arch/arc/lib/Makefile | 16 ++++++ arch/arc/lib/bootm.c | 106 ++++++++++++++++++++++++++++++++++ arch/arc/lib/memcmp.S | 121 +++++++++++++++++++++++++++++++++++++++ arch/arc/lib/memcpy-700.S | 63 +++++++++++++++++++++ arch/arc/lib/memset.S | 62 ++++++++++++++++++++ arch/arc/lib/relocate.c | 72 +++++++++++++++++++++++ arch/arc/lib/sections.c | 21 +++++++ arch/arc/lib/strchr-700.S | 141 ++++++++++++++++++++++++++++++++++++++++++++++ arch/arc/lib/strcmp.S | 97 +++++++++++++++++++++++++++++++ arch/arc/lib/strcpy-700.S | 67 ++++++++++++++++++++++ arch/arc/lib/strlen.S | 80 ++++++++++++++++++++++++++ 11 files changed, 846 insertions(+) create mode 100644 arch/arc/lib/Makefile create mode 100644 arch/arc/lib/bootm.c create mode 100644 arch/arc/lib/memcmp.S create mode 100644 arch/arc/lib/memcpy-700.S create mode 100644 arch/arc/lib/memset.S create mode 100644 arch/arc/lib/relocate.c create mode 100644 arch/arc/lib/sections.c create mode 100644 arch/arc/lib/strchr-700.S create mode 100644 arch/arc/lib/strcmp.S create mode 100644 arch/arc/lib/strcpy-700.S create mode 100644 arch/arc/lib/strlen.S

diff --git a/arch/arc/lib/Makefile b/arch/arc/lib/Makefile new file mode 100644 index 0000000..7675f85 --- /dev/null +++ b/arch/arc/lib/Makefile @@ -0,0 +1,16 @@ +# +# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += sections.o +obj-y += relocate.o +obj-y += strchr-700.o +obj-y += strcmp.o +obj-y += strcpy-700.o +obj-y += strlen.o +obj-y += memcmp.o +obj-y += memcpy-700.o +obj-y += memset.o +obj-$(CONFIG_CMD_BOOTM) += bootm.o diff --git a/arch/arc/lib/bootm.c b/arch/arc/lib/bootm.c new file mode 100644 index 0000000..d185a50 --- /dev/null +++ b/arch/arc/lib/bootm.c @@ -0,0 +1,106 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +DECLARE_GLOBAL_DATA_PTR; + +static ulong get_sp(void) +{ + ulong ret; + + asm("mov %0, sp" : "=r"(ret) : ); + return ret; +} + +void arch_lmb_reserve(struct lmb *lmb) +{ + ulong sp; + + /* + * Booting a (Linux) kernel image + * + * Allocate space for command line and board info - the + * address should be as high as possible within the reach of + * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused + * memory, which means far enough below the current stack + * pointer. + */ + sp = get_sp(); + debug("## Current stack ends at 0x%08lx ", sp); + + /* adjust sp by 4K to be safe */ + sp -= 4096; + lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp)); +} + +static int cleanup_before_linux(void) +{ + disable_interrupts(); + flush_dcache_all(); + invalidate_icache_all(); + + return 0; +} + +/* Subcommand: PREP */ +static void boot_prep_linux(bootm_headers_t *images) +{ + if (image_setup_linux(images)) + hang(); +} + +/* Subcommand: GO */ +static void boot_jump_linux(bootm_headers_t *images, int flag) +{ + void (*kernel_entry)(int zero, int arch, uint params); + unsigned int r0, r2; + int fake = (flag & BOOTM_STATE_OS_FAKE_GO); + + kernel_entry = (void (*)(int, int, uint))images->ep; + + debug("## Transferring control to Linux (at address %08lx)...\n", + (ulong) kernel_entry); + bootstage_mark(BOOTSTAGE_ID_RUN_OS); + + printf("\nStarting kernel ...%s\n\n", fake ? + "(fake run for tracing)" : ""); + bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel"); + + cleanup_before_linux(); + + if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) { + r0 = 2; + r2 = (unsigned int)images->ft_addr; + } else { + r0 = 1; + r2 = (unsigned int)getenv("bootargs"); + } + + if (!fake) + kernel_entry(r0, 0, r2); +} + +int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) +{ + /* No need for those on ARC */ + if ((flag & BOOTM_STATE_OS_BD_T) || (flag & BOOTM_STATE_OS_CMDLINE)) + return -1; + + if (flag & BOOTM_STATE_OS_PREP) { + boot_prep_linux(images); + return 0; + } + + if (flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)) { + boot_jump_linux(images, flag); + return 0; + } + + boot_prep_linux(images); + boot_jump_linux(images, flag); + return 0; +} diff --git a/arch/arc/lib/memcmp.S b/arch/arc/lib/memcmp.S new file mode 100644 index 0000000..fa5aac5 --- /dev/null +++ b/arch/arc/lib/memcmp.S @@ -0,0 +1,121 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifdef __LITTLE_ENDIAN__ +#define WORD2 r2 +#define SHIFT r3 +#else /* __BIG_ENDIAN__ */ +#define WORD2 r3 +#define SHIFT r2 +#endif /* _ENDIAN__ */ + +.global memcmp +.align 4 +memcmp: + or %r12, %r0, %r1 + asl_s %r12, %r12, 30 + sub %r3, %r2, 1 + brls %r2, %r12, .Lbytewise + ld %r4, [%r0, 0] + ld %r5, [%r1, 0] + lsr.f %lp_count, %r3, 3 + lpne .Loop_end + ld_s WORD2, [%r0, 4] + ld_s %r12, [%r1, 4] + brne %r4, %r5, .Leven + ld.a %r4, [%r0, 8] + ld.a %r5, [%r1, 8] + brne WORD2, %r12, .Lodd +.Loop_end: + asl_s SHIFT, SHIFT, 3 + bhs_s .Last_cmp + brne %r4, %r5, .Leven + ld %r4, [%r0, 4] + ld %r5, [%r1, 4] +#ifdef __LITTLE_ENDIAN__ + nop_s + /* one more load latency cycle */ +.Last_cmp: + xor %r0, %r4, %r5 + bset %r0, %r0, SHIFT + sub_s %r1, %r0, 1 + bic_s %r1, %r1, %r0 + norm %r1, %r1 + b.d .Leven_cmp + and %r1, %r1, 24 +.Leven: + xor %r0, %r4, %r5 + sub_s %r1, %r0, 1 + bic_s %r1, %r1, %r0 + norm %r1, %r1 + /* slow track insn */ + and %r1, %r1, 24 +.Leven_cmp: + asl %r2, %r4, %r1 + asl %r12, %r5, %r1 + lsr_s %r2, %r2, 1 + lsr_s %r12, %r12, 1 + j_s.d [%blink] + sub %r0, %r2, %r12 + .balign 4 +.Lodd: + xor %r0, WORD2, %r12 + sub_s %r1, %r0, 1 + bic_s %r1, %r1, %r0 + norm %r1, %r1 + /* slow track insn */ + and %r1, %r1, 24 + asl_s %r2, %r2, %r1 + asl_s %r12, %r12, %r1 + lsr_s %r2, %r2, 1 + lsr_s %r12, %r12, 1 + j_s.d [%blink] + sub %r0, %r2, %r12 +#else /* __BIG_ENDIAN__ */ +.Last_cmp: + neg_s SHIFT, SHIFT + lsr %r4, %r4, SHIFT + lsr %r5, %r5, SHIFT + /* slow track insn */ +.Leven: + sub.f %r0, %r4, %r5 + mov.ne %r0, 1 + j_s.d [%blink] + bset.cs %r0, %r0, 31 +.Lodd: + cmp_s WORD2, %r12 + + mov_s %r0, 1 + j_s.d [%blink] + bset.cs %r0, %r0, 31 +#endif /* _ENDIAN__ */ + .balign 4 +.Lbytewise: + breq %r2, 0, .Lnil + ldb %r4, [%r0, 0] + ldb %r5, [%r1, 0] + lsr.f %lp_count, %r3 + lpne .Lbyte_end + ldb_s %r3, [%r0, 1] + ldb %r12, [%r1, 1] + brne %r4, %r5, .Lbyte_even + ldb.a %r4, [%r0, 2] + ldb.a %r5, [%r1, 2] + brne %r3, %r12, .Lbyte_odd +.Lbyte_end: + bcc .Lbyte_even + brne %r4, %r5, .Lbyte_even + ldb_s %r3, [%r0, 1] + ldb_s %r12, [%r1, 1] +.Lbyte_odd: + j_s.d [%blink] + sub %r0, %r3, %r12 +.Lbyte_even: + j_s.d [%blink] + sub %r0, %r4, %r5 +.Lnil: + j_s.d [%blink] + mov %r0, 0 diff --git a/arch/arc/lib/memcpy-700.S b/arch/arc/lib/memcpy-700.S new file mode 100644 index 0000000..51dd73a --- /dev/null +++ b/arch/arc/lib/memcpy-700.S @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +.global memcpy +.align 4 +memcpy: + or %r3, %r0, %r1 + asl_s %r3, %r3, 30 + mov_s %r5, %r0 + brls.d %r2, %r3, .Lcopy_bytewise + sub.f %r3, %r2, 1 + ld_s %r12, [%r1, 0] + asr.f %lp_count, %r3, 3 + bbit0.d %r3, 2, .Lnox4 + bmsk_s %r2, %r2, 1 + st.ab %r12, [%r5, 4] + ld.a %r12, [%r1, 4] +.Lnox4: + lppnz .Lendloop + ld_s %r3, [%r1, 4] + st.ab %r12, [%r5, 4] + ld.a %r12, [%r1, 8] + st.ab %r3, [%r5, 4] +.Lendloop: + breq %r2, 0, .Last_store + ld %r3, [%r5, 0] +#ifdef __LITTLE_ENDIAN__ + add3 %r2, -1, %r2 + /* uses long immediate */ + xor_s %r12, %r12, %r3 + bmsk %r12, %r12, %r2 + xor_s %r12, %r12, %r3 +#else /* __BIG_ENDIAN__ */ + sub3 %r2, 31, %r2 + /* uses long immediate */ + xor_s %r3, %r3, %r12 + bmsk %r3, %r3, %r2 + xor_s %r12, %r12, %r3 +#endif /* _ENDIAN__ */ +.Last_store: + j_s.d [%blink] + st %r12, [%r5, 0] + + .balign 4 +.Lcopy_bytewise: + jcs [%blink] + ldb_s %r12, [%r1, 0] + lsr.f %lp_count, %r3 + bhs_s .Lnox1 + stb.ab %r12, [%r5, 1] + ldb.a %r12, [%r1, 1] +.Lnox1: + lppnz .Lendbloop + ldb_s %r3, [%r1, 1] + stb.ab %r12, [%r5, 1] + ldb.a %r12, [%r1, 2] + stb.ab %r3, [%r5, 1] +.Lendbloop: + j_s.d [%blink] + stb %r12, [%r5, 0] diff --git a/arch/arc/lib/memset.S b/arch/arc/lib/memset.S new file mode 100644 index 0000000..017e8af --- /dev/null +++ b/arch/arc/lib/memset.S @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define SMALL 7 /* Must be at least 6 to deal with alignment/loop issues. */ + +.global memset +.align 4 +memset: + mov_s %r4, %r0 + or %r12, %r0, %r2 + bmsk.f %r12, %r12, 1 + extb_s %r1, %r1 + asl %r3, %r1, 8 + beq.d .Laligned + or_s %r1, %r1, %r3 + brls %r2, SMALL, .Ltiny + add %r3, %r2, %r0 + stb %r1, [%r3, -1] + bclr_s %r3, %r3, 0 + stw %r1, [%r3, -2] + bmsk.f %r12, %r0, 1 + add_s %r2, %r2, %r12 + sub.ne %r2, %r2, 4 + stb.ab %r1, [%r4, 1] + and %r4, %r4, -2 + stw.ab %r1, [%r4, 2] + and %r4, %r4, -4 + + .balign 4 +.Laligned: + asl %r3, %r1, 16 + lsr.f %lp_count, %r2, 2 + or_s %r1, %r1, %r3 + lpne .Loop_end + st.ab %r1, [%r4, 4] +.Loop_end: + j_s [%blink] + + .balign 4 +.Ltiny: + mov.f %lp_count, %r2 + lpne .Ltiny_end + stb.ab %r1, [%r4, 1] +.Ltiny_end: + j_s [%blink] + +/* + * memzero: @r0 = mem, @r1 = size_t + * memset: @r0 = mem, @r1 = char, @r2 = size_t + */ + +.global memzero +.align 4 +memzero: + /* adjust bzero args to memset args */ + mov %r2, %r1 + mov %r1, 0 + /* tail call so need to tinker with blink */ + b memset diff --git a/arch/arc/lib/relocate.c b/arch/arc/lib/relocate.c new file mode 100644 index 0000000..956aa14 --- /dev/null +++ b/arch/arc/lib/relocate.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <elf.h> +#include <asm/sections.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Base functionality is taken from x86 version with added ARC-specifics + */ +int do_elf_reloc_fixups(void) +{ + Elf32_Rela *re_src = (Elf32_Rela *)(&__rel_dyn_start); + Elf32_Rela *re_end = (Elf32_Rela *)(&__rel_dyn_end); + + Elf32_Addr *offset_ptr_rom, *last_offset = NULL; + Elf32_Addr *offset_ptr_ram; + + do { + /* Get the location from the relocation entry */ + offset_ptr_rom = (Elf32_Addr *)re_src->r_offset; + + /* Check that the location of the relocation is in .text */ + if (offset_ptr_rom >= (Elf32_Addr *)CONFIG_SYS_TEXT_BASE && + offset_ptr_rom > last_offset) { + unsigned int val; + /* Switch to the in-RAM version */ + offset_ptr_ram = (Elf32_Addr *)((ulong)offset_ptr_rom + + gd->reloc_off); + + /* + * Use "memcpy" because target location might be + * 16-bit aligned on ARC so we may need to read + * byte-by-byte. On attempt to read entire word by + * CPU throws an exception + */ + memcpy(&val, offset_ptr_ram, sizeof(int)); + + /* If location in ".text" section swap value */ + if ((unsigned int)offset_ptr_rom < + (unsigned int)&__text_end) + val = (val << 16) | (val >> 16); + + /* Check that the target points into .text */ + if (val >= CONFIG_SYS_TEXT_BASE && val <= + (unsigned int)&__bss_end) { + val += gd->reloc_off; + /* If location in ".text" section swap value */ + if ((unsigned int)offset_ptr_rom < + (unsigned int)&__text_end) + val = (val << 16) | (val >> 16); + memcpy(offset_ptr_ram, &val, sizeof(int)); + } else { + debug(" %p: rom reloc %x, ram %p, value %x, limit %x\n", + re_src, re_src->r_offset, offset_ptr_ram, + val, (unsigned int)&__bss_end); + } + } else { + debug(" %p: rom reloc %x, last %p\n", re_src, + re_src->r_offset, last_offset); + } + last_offset = offset_ptr_rom; + + } while (++re_src < re_end); + + return 0; +} diff --git a/arch/arc/lib/sections.c b/arch/arc/lib/sections.c new file mode 100644 index 0000000..b0b46a4 --- /dev/null +++ b/arch/arc/lib/sections.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * For some reason linker sets linker-generated symbols to zero in PIE mode. + * A work-around is substitution of linker-generated symbols with + * compiler-generated symbols which are properly handled by linker in PAE mode. + */ + +char __bss_start[0] __attribute__((section(".__bss_start"))); +char __bss_end[0] __attribute__((section(".__bss_end"))); +char __image_copy_start[0] __attribute__((section(".__image_copy_start"))); +char __image_copy_end[0] __attribute__((section(".__image_copy_end"))); +char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start"))); +char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end"))); +char __text_start[0] __attribute__((section(".__text_start"))); +char __text_end[0] __attribute__((section(".__text_end"))); +char __init_end[0] __attribute__((section(".__init_end"))); diff --git a/arch/arc/lib/strchr-700.S b/arch/arc/lib/strchr-700.S new file mode 100644 index 0000000..55fcc9f --- /dev/null +++ b/arch/arc/lib/strchr-700.S @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * ARC700 has a relatively long pipeline and branch prediction, so we want + * to avoid branches that are hard to predict. On the other hand, the + * presence of the norm instruction makes it easier to operate on whole + * words branch-free. + */ + +.global strchr +.align 4 +strchr: + extb_s %r1, %r1 + asl %r5, %r1, 8 + bmsk %r2, %r0, 1 + or %r5, %r5, %r1 + mov_s %r3, 0x01010101 + breq.d %r2, %r0, .Laligned + asl %r4, %r5, 16 + sub_s %r0, %r0, %r2 + asl %r7, %r2, 3 + ld_s %r2, [%r0] +#ifdef __LITTLE_ENDIAN__ + asl %r7, %r3, %r7 +#else /* __BIG_ENDIAN__ */ + lsr %r7, %r3, %r7 +#endif /* _ENDIAN__ */ + or %r5, %r5, %r4 + ror %r4, %r3 + sub %r12, %r2, %r7 + bic_s %r12, %r12, %r2 + and %r12, %r12, %r4 + brne.d %r12, 0, .Lfound0_ua + xor %r6, %r2, %r5 + ld.a %r2, [%r0, 4] + sub %r12, %r6, %r7 + bic %r12, %r12, %r6 +#ifdef __LITTLE_ENDIAN__ + and %r7, %r12, %r4 + /* For speed, we want this branch to be unaligned. */ + breq %r7, 0, .Loop + /* Likewise this one */ + b .Lfound_char +#else /* __BIG_ENDIAN__ */ + and %r12, %r12, %r4 + /* For speed, we want this branch to be unaligned. */ + breq %r12, 0, .Loop + lsr_s %r12, %r12, 7 + bic %r2, %r7, %r6 + b.d .Lfound_char_b + and_s %r2, %r2, %r12 +#endif /* _ENDIAN__ */ + /* We require this code address to be unaligned for speed... */ +.Laligned: + ld_s %r2, [%r0] + or %r5, %r5, %r4 + ror %r4, %r3 + /* ... so that this code address is aligned, for itself and ... */ +.Loop: + sub %r12, %r2, %r3 + bic_s %r12, %r12, %r2 + and %r12, %r12, %r4 + brne.d %r12, 0, .Lfound0 + xor %r6, %r2, %r5 + ld.a %r2, [%r0, 4] + sub %r12, %r6, %r3 + bic %r12, %r12, %r6 + and %r7, %r12, %r4 + breq %r7, 0, .Loop + /* + *... so that this branch is unaligned. + * Found searched-for character. + * r0 has already advanced to next word. + */ +#ifdef __LITTLE_ENDIAN__ + /* + * We only need the information about the first matching byte + * (i.e. the least significant matching byte) to be exact, + * hence there is no problem with carry effects. + */ +.Lfound_char: + sub %r3, %r7, 1 + bic %r3, %r3, %r7 + norm %r2, %r3 + sub_s %r0, %r0, 1 + asr_s %r2, %r2, 3 + j.d [%blink] + sub_s %r0, %r0, %r2 + + .balign 4 +.Lfound0_ua: + mov %r3, %r7 +.Lfound0: + sub %r3, %r6, %r3 + bic %r3, %r3, %r6 + and %r2, %r3, %r4 + or_s %r12, %r12, %r2 + sub_s %r3, %r12, 1 + bic_s %r3, %r3, %r12 + norm %r3, %r3 + add_s %r0, %r0, 3 + asr_s %r12, %r3, 3 + asl.f 0, %r2, %r3 + sub_s %r0, %r0, %r12 + j_s.d [%blink] + mov.pl %r0, 0 +#else /* __BIG_ENDIAN__ */ +.Lfound_char: + lsr %r7, %r7, 7 + + bic %r2, %r7, %r6 +.Lfound_char_b: + norm %r2, %r2 + sub_s %r0, %r0, 4 + asr_s %r2, %r2, 3 + j.d [%blink] + add_s %r0, %r0, %r2 + +.Lfound0_ua: + mov_s %r3, %r7 +.Lfound0: + asl_s %r2, %r2, 7 + or %r7, %r6, %r4 + bic_s %r12, %r12, %r2 + sub %r2, %r7, %r3 + or %r2, %r2, %r6 + bic %r12, %r2, %r12 + bic.f %r3, %r4, %r12 + norm %r3, %r3 + + add.pl %r3, %r3, 1 + asr_s %r12, %r3, 3 + asl.f 0, %r2, %r3 + add_s %r0, %r0, %r12 + j_s.d [%blink] + mov.mi %r0, 0 +#endif /* _ENDIAN__ */ diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S new file mode 100644 index 0000000..8cb7d2f --- /dev/null +++ b/arch/arc/lib/strcmp.S @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This is optimized primarily for the ARC700. + * It would be possible to speed up the loops by one cycle / word + * respective one cycle / byte by forcing double source 1 alignment, unrolling + * by a factor of two, and speculatively loading the second word / byte of + * source 1; however, that would increase the overhead for loop setup / finish, + * and strcmp might often terminate early. + */ + +.global strcmp +.align 4 +strcmp: + or %r2, %r0, %r1 + bmsk_s %r2, %r2, 1 + brne %r2, 0, .Lcharloop + mov_s %r12, 0x01010101 + ror %r5, %r12 +.Lwordloop: + ld.ab %r2, [%r0, 4] + ld.ab %r3, [%r1, 4] + nop_s + sub %r4, %r2, %r12 + bic %r4, %r4, %r2 + and %r4, %r4, %r5 + brne %r4, 0, .Lfound0 + breq %r2 ,%r3, .Lwordloop +#ifdef __LITTLE_ENDIAN__ + xor %r0, %r2, %r3 /* mask for difference */ + sub_s %r1, %r0, 1 + bic_s %r0, %r0, %r1 /* mask for least significant difference bit */ + sub %r1, %r5, %r0 + xor %r0, %r5, %r1 /* mask for least significant difference byte */ + and_s %r2, %r2, %r0 + and_s %r3, %r3, %r0 +#endif /* _ENDIAN__ */ + cmp_s %r2, %r3 + mov_s %r0, 1 + j_s.d [%blink] + bset.lo %r0, %r0, 31 + + .balign 4 +#ifdef __LITTLE_ENDIAN__ +.Lfound0: + xor %r0, %r2, %r3 /* mask for difference */ + or %r0, %r0, %r4 /* or in zero indicator */ + sub_s %r1, %r0, 1 + bic_s %r0, %r0, %r1 /* mask for least significant difference bit */ + sub %r1, %r5, %r0 + xor %r0, %r5, %r1 /* mask for least significant difference byte */ + and_s %r2, %r2, %r0 + and_s %r3, %r3, %r0 + sub.f %r0, %r2, %r3 + mov.hi %r0, 1 + j_s.d [%blink] + bset.lo %r0, %r0, 31 +#else /* __BIG_ENDIAN__ */ + /* + * The zero-detection above can mis-detect 0x01 bytes as zeroes + * because of carry-propagateion from a lower significant zero byte. + * We can compensate for this by checking that bit0 is zero. + * This compensation is not necessary in the step where we + * get a low estimate for r2, because in any affected bytes + * we already have 0x00 or 0x01, which will remain unchanged + * when bit 7 is cleared. + */ + .balign 4 +.Lfound0: + lsr %r0, %r4, 8 + lsr_s %r1, %r2 + bic_s %r2, %r2, %r0 /* get low estimate for r2 and get ... */ + bic_s %r0, %r0, %r1 /* <this is the adjusted mask for zeros> */ + or_s %r3, %r3, %r0 /* ... high estimate r3 so that r2 > r3 will */ + cmp_s %r3, %r2 /* ... be independent of trailing garbage */ + or_s %r2, %r2, %r0 /* likewise for r3 > r2 */ + bic_s %r3, %r3, %r0 + rlc %r0, 0 /* r0 := r2 > r3 ? 1 : 0 */ + cmp_s %r2, %r3 + j_s.d [%blink] + bset.lo %r0, %r0, 31 +#endif /* _ENDIAN__ */ + + .balign 4 +.Lcharloop: + ldb.ab %r2,[%r0,1] + ldb.ab %r3,[%r1,1] + nop_s + breq %r2, 0, .Lcmpend + breq %r2, %r3, .Lcharloop +.Lcmpend: + j_s.d [%blink] + sub %r0, %r2, %r3 diff --git a/arch/arc/lib/strcpy-700.S b/arch/arc/lib/strcpy-700.S new file mode 100644 index 0000000..41bb53e --- /dev/null +++ b/arch/arc/lib/strcpy-700.S @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * If dst and src are 4 byte aligned, copy 8 bytes at a time. + * If the src is 4, but not 8 byte aligned, we first read 4 bytes to get + * it 8 byte aligned. Thus, we can do a little read-ahead, without + * dereferencing a cache line that we should not touch. + * Note that short and long instructions have been scheduled to avoid + * branch stalls. + * The beq_s to r3z could be made unaligned & long to avoid a stall + * there, but it is not likely to be taken often, and it would also be likely + * to cost an unaligned mispredict at the next call. + */ + +.global strcpy +.align 4 +strcpy: + or %r2, %r0, %r1 + bmsk_s %r2, %r2, 1 + brne.d %r2, 0, charloop + mov_s %r10, %r0 + ld_s %r3, [%r1, 0] + mov %r8, 0x01010101 + bbit0.d %r1, 2, loop_start + ror %r12, %r8 + sub %r2, %r3, %r8 + bic_s %r2, %r2, %r3 + tst_s %r2,%r12 + bne r3z + mov_s %r4,%r3 + .balign 4 +loop: + ld.a %r3, [%r1, 4] + st.ab %r4, [%r10, 4] +loop_start: + ld.a %r4, [%r1, 4] + sub %r2, %r3, %r8 + bic_s %r2, %r2, %r3 + tst_s %r2, %r12 + bne_s r3z + st.ab %r3, [%r10, 4] + sub %r2, %r4, %r8 + bic %r2, %r2, %r4 + tst %r2, %r12 + beq loop + mov_s %r3, %r4 +#ifdef __LITTLE_ENDIAN__ +r3z: bmsk.f %r1, %r3, 7 + lsr_s %r3, %r3, 8 +#else /* __BIG_ENDIAN__ */ +r3z: lsr.f %r1, %r3, 24 + asl_s %r3, %r3, 8 +#endif /* _ENDIAN__ */ + bne.d r3z + stb.ab %r1, [%r10, 1] + j_s [%blink] + + .balign 4 +charloop: + ldb.ab %r3, [%r1, 1] + brne.d %r3, 0, charloop + stb.ab %r3, [%r10, 1] + j [%blink] diff --git a/arch/arc/lib/strlen.S b/arch/arc/lib/strlen.S new file mode 100644 index 0000000..666e22c --- /dev/null +++ b/arch/arc/lib/strlen.S @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +.global strlen +.align 4 +strlen: + or %r3, %r0, 7 + ld %r2, [%r3, -7] + ld.a %r6, [%r3, -3] + mov %r4, 0x01010101 + /* uses long immediate */ +#ifdef __LITTLE_ENDIAN__ + asl_s %r1, %r0, 3 + btst_s %r0, 2 + asl %r7, %r4, %r1 + ror %r5, %r4 + sub %r1, %r2, %r7 + bic_s %r1, %r1, %r2 + mov.eq %r7, %r4 + sub %r12, %r6, %r7 + bic %r12, %r12, %r6 + or.eq %r12, %r12, %r1 + and %r12, %r12, %r5 + brne %r12, 0, .Learly_end +#else /* __BIG_ENDIAN__ */ + ror %r5, %r4 + btst_s %r0, 2 + mov_s %r1, 31 + sub3 %r7, %r1, %r0 + sub %r1, %r2, %r4 + bic_s %r1, %r1, %r2 + bmsk %r1, %r1, %r7 + sub %r12, %r6, %r4 + bic %r12, %r12, %r6 + bmsk.ne %r12, %r12, %r7 + or.eq %r12, %r12, %r1 + and %r12, %r12, %r5 + brne %r12, 0, .Learly_end +#endif /* _ENDIAN__ */ + +.Loop: + ld_s %r2, [%r3, 4] + ld.a %r6, [%r3, 8] + /* stall for load result */ + sub %r1, %r2, %r4 + bic_s %r1, %r1, %r2 + sub %r12, %r6, %r4 + bic %r12, %r12, %r6 + or %r12, %r12, %r1 + and %r12, %r12, %r5 + breq %r12, 0, .Loop +.Lend: + and.f %r1, %r1, %r5 + sub.ne %r3, %r3, 4 + mov.eq %r1, %r12 +#ifdef __LITTLE_ENDIAN__ + sub_s %r2, %r1, 1 + bic_s %r2, %r2, %r1 + norm %r1, %r2 + sub_s %r0, %r0, 3 + lsr_s %r1, %r1, 3 + sub %r0, %r3, %r0 + j_s.d [%blink] + sub %r0, %r0, %r1 +#else /* __BIG_ENDIAN__ */ + lsr_s %r1, %r1, 7 + mov.eq %r2, %r6 + bic_s %r1, %r1, %r2 + norm %r1, %r1 + sub %r0, %r3, %r0 + lsr_s %r1, %r1, 3 + j_s.d [%blink] + add %r0, %r0, %r1 +#endif /* _ENDIAN */ +.Learly_end: + b.d .Lend + sub_s.ne %r1, %r1, %r1

Signed-off-by: Alexey Brodkin abrodkin@synopsys.com

Cc: Vineet Gupta vgupta@synopsys.com Cc: Francois Bedard fbedard@synopsys.com Cc: Wolfgang Denk wd@denx.de Cc: Heiko Schocher hs@denx.de --- Changes for v4:

* Clean-up of EXPORT_FUNC for ARC.

examples/standalone/stubs.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)

diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c index 32a19ce..c5c025d 100644 --- a/examples/standalone/stubs.c +++ b/examples/standalone/stubs.c @@ -210,6 +210,19 @@ gd_t *global_data; " l.jr r13\n" \ " l.nop\n" \ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r13"); +#elif defined(CONFIG_ARC) +/* + * r25 holds the pointer to the global_data. r10 is call clobbered. + */ +#define EXPORT_FUNC(x) \ + asm volatile( \ +" .align 4\n" \ +" .globl " #x "\n" \ +#x ":\n" \ +" ld r10, [r25, %0]\n" \ +" ld r10, [r10, %1]\n" \ +" j [r10]\n" \ + : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r10"); #else /*" addi $sp, $sp, -24\n" \ " br $r16\n" */

AXS101 is a new generation of devlopment boards from Synopsys that houses ASIC with ARC700 and lots of DesignWare peripherals:

* DW APB UART * DW Mobile Storage (MMC/SD) * DW I2C * DW GMAC

Signed-off-by: Alexey Brodkin abrodkin@synopsys.com

Cc: Vineet Gupta vgupta@synopsys.com Cc: Francois Bedard fbedard@synopsys.com Cc: Wolfgang Denk wd@denx.de Cc: Heiko Schocher hs@denx.de --- Changes for v4: * Removed common CONFIG_SYS_BAUDRATE_TABLE * Removed MEMTEST-related definitions as suggested by Wolfgang * Removed values assigned to logical definitions

board/synopsys/axs101/Makefile | 8 ++ board/synopsys/axs101/axs101.c | 44 ++++++++ board/synopsys/axs101/nand.c | 226 +++++++++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/axs101.h | 181 +++++++++++++++++++++++++++++++++ 5 files changed, 460 insertions(+) create mode 100644 board/synopsys/axs101/Makefile create mode 100644 board/synopsys/axs101/axs101.c create mode 100644 board/synopsys/axs101/nand.c create mode 100644 include/configs/axs101.h

diff --git a/board/synopsys/axs101/Makefile b/board/synopsys/axs101/Makefile new file mode 100644 index 0000000..f0965f7 --- /dev/null +++ b/board/synopsys/axs101/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += axs101.o +obj-$(CONFIG_CMD_NAND) += nand.o diff --git a/board/synopsys/axs101/axs101.c b/board/synopsys/axs101/axs101.c new file mode 100644 index 0000000..4dbeaea --- /dev/null +++ b/board/synopsys/axs101/axs101.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dwmmc.h> +#include <malloc.h> +#include <netdev.h> +#include <phy.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_mmc_init(bd_t *bis) +{ + struct dwmci_host *host = NULL; + + host = malloc(sizeof(struct dwmci_host)); + if (!host) { + printf("dwmci_host malloc fail!\n"); + return 1; + } + + memset(host, 0, sizeof(struct dwmci_host)); + host->name = "Synopsys Mobile storage"; + host->ioaddr = (void *)ARC_DWMMC_BASE; + host->buswidth = 4; + host->dev_index = 0; + host->bus_hz = 25000000; + + add_dwmci(host, 52000000, 400000); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + if (designware_initialize(0, ARC_DWGMAC_BASE, 0, + PHY_INTERFACE_MODE_RGMII) >= 0) + return 1; + + return 0; +} diff --git a/board/synopsys/axs101/nand.c b/board/synopsys/axs101/nand.c new file mode 100644 index 0000000..8672803 --- /dev/null +++ b/board/synopsys/axs101/nand.c @@ -0,0 +1,226 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <bouncebuf.h> +#include <common.h> +#include <malloc.h> +#include <nand.h> +#include <asm/io.h> + +#define BUS_WIDTH 8 /* AXI data bus width in bytes */ + +/* DMA buffer descriptor bits & masks */ +#define BD_STAT_OWN (1 << 31) +#define BD_STAT_BD_FIRST (1 << 3) +#define BD_STAT_BD_LAST (1 << 2) +#define BD_SIZES_BUFFER1_MASK 0xfff + +#define BD_STAT_BD_COMPLETE (BD_STAT_BD_FIRST | BD_STAT_BD_LAST) + +/* Controller command flags */ +#define B_WFR (1 << 19) /* 1b - Wait for ready */ +#define B_LC (1 << 18) /* 1b - Last cycle */ +#define B_IWC (1 << 13) /* 1b - Interrupt when complete */ + +/* NAND cycle types */ +#define B_CT_ADDRESS (0x0 << 16) /* Address operation */ +#define B_CT_COMMAND (0x1 << 16) /* Command operation */ +#define B_CT_WRITE (0x2 << 16) /* Write operation */ +#define B_CT_READ (0x3 << 16) /* Write operation */ + +enum nand_isr_t { + NAND_ISR_DATAREQUIRED = 0, + NAND_ISR_TXUNDERFLOW, + NAND_ISR_TXOVERFLOW, + NAND_ISR_DATAAVAILABLE, + NAND_ISR_RXUNDERFLOW, + NAND_ISR_RXOVERFLOW, + NAND_ISR_TXDMACOMPLETE, + NAND_ISR_RXDMACOMPLETE, + NAND_ISR_DESCRIPTORUNAVAILABLE, + NAND_ISR_CMDDONE, + NAND_ISR_CMDAVAILABLE, + NAND_ISR_CMDERROR, + NAND_ISR_DATATRANSFEROVER, + NAND_ISR_NONE +}; + +enum nand_regs_t { + AC_FIFO = 0, /* address and command fifo */ + IDMAC_BDADDR = 0x18, /* idmac descriptor list base address */ + INT_STATUS = 0x118, /* interrupt status register */ + INT_CLR_STATUS = 0x120, /* interrupt clear status register */ +}; + +struct nand_bd { + uint32_t status; /* DES0 */ + uint32_t sizes; /* DES1 */ + uint32_t buffer_ptr0; /* DES2 */ + uint32_t buffer_ptr1; /* DES3 */ +}; + +#define NAND_REG_WRITE(r, v) writel(v, CONFIG_SYS_NAND_BASE + r) +#define NAND_REG_READ(r) readl(CONFIG_SYS_NAND_BASE + r) + +static struct nand_bd *bd; /* DMA buffer descriptors */ + +/** + * axs101_nand_write_buf - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static uint32_t nand_flag_is_set(uint32_t flag) +{ + uint32_t reg = NAND_REG_READ(INT_STATUS); + + if (reg & (1 << NAND_ISR_CMDERROR)) + return 0; + + if (reg & (1 << flag)) { + NAND_REG_WRITE(INT_CLR_STATUS, 1 << flag); + return 1; + } + + return 0; +} + +/** + * axs101_nand_write_buf - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void axs101_nand_write_buf(struct mtd_info *mtd, const u_char *buf, + int len) +{ + struct bounce_buffer bbstate; + + bounce_buffer_start(&bbstate, (void *)buf, len, GEN_BB_READ); + + /* Setup buffer descriptor */ + writel(BD_STAT_OWN | BD_STAT_BD_COMPLETE, &bd->status); + writel(ALIGN(len, BUS_WIDTH) & BD_SIZES_BUFFER1_MASK, &bd->sizes); + writel(bbstate.bounce_buffer, &bd->buffer_ptr0); + writel(0, &bd->buffer_ptr1); + + /* Issue "write" command */ + NAND_REG_WRITE(AC_FIFO, B_CT_WRITE | B_WFR | B_IWC | B_LC | (len-1)); + + /* Wait for NAND command and DMA to complete */ + while (!nand_flag_is_set(NAND_ISR_CMDDONE)) + ; + while (!nand_flag_is_set(NAND_ISR_TXDMACOMPLETE)) + ; + + bounce_buffer_stop(&bbstate); +} + +/** + * axs101_nand_read_buf - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store data + * @len: number of bytes to read + */ +static void axs101_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + struct bounce_buffer bbstate; + + bounce_buffer_start(&bbstate, buf, len, GEN_BB_WRITE); + + /* Setup buffer descriptor */ + writel(BD_STAT_OWN | BD_STAT_BD_COMPLETE, &bd->status); + writel(ALIGN(len, BUS_WIDTH) & BD_SIZES_BUFFER1_MASK, &bd->sizes); + writel(bbstate.bounce_buffer, &bd->buffer_ptr0); + writel(0, &bd->buffer_ptr1); + + /* Issue "read" command */ + NAND_REG_WRITE(AC_FIFO, B_CT_READ | B_WFR | B_IWC | B_LC | (len - 1)); + + /* Wait for NAND command and DMA to complete */ + while (!nand_flag_is_set(NAND_ISR_CMDDONE)) + ; + while (!nand_flag_is_set(NAND_ISR_RXDMACOMPLETE)) + ; + + bounce_buffer_stop(&bbstate); +} + +/** + * axs101_nand_read_byte - read one byte from the chip + * @mtd: MTD device structure + */ +static u_char axs101_nand_read_byte(struct mtd_info *mtd) +{ + u8 byte; + + axs101_nand_read_buf(mtd, (uchar *)&byte, sizeof(byte)); + return byte; +} + +/** + * axs101_nand_read_word - read one word from the chip + * @mtd: MTD device structure + */ +static u16 axs101_nand_read_word(struct mtd_info *mtd) +{ + u16 word; + + axs101_nand_read_buf(mtd, (uchar *)&word, sizeof(word)); + return word; +} + +/** + * axs101_nand_hwcontrol - NAND control functions wrapper. + * @mtd: MTD device structure + * @cmd: Command + */ +static void axs101_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, + unsigned int ctrl) +{ + if (cmd == NAND_CMD_NONE) + return; + + cmd = cmd & 0xff; + + switch (ctrl & (NAND_ALE | NAND_CLE)) { + /* Address */ + case NAND_ALE: + cmd |= B_CT_ADDRESS; + break; + + /* Command */ + case NAND_CLE: + cmd |= B_CT_COMMAND | B_WFR; + + break; + + default: + debug("%s: unknown ctrl %#x\n", __func__, ctrl); + } + + NAND_REG_WRITE(AC_FIFO, cmd | B_LC); + while (!nand_flag_is_set(NAND_ISR_CMDDONE)) + ; +} + +int board_nand_init(struct nand_chip *nand) +{ + bd = (struct nand_bd *)memalign(ARCH_DMA_MINALIGN, + sizeof(struct nand_bd)); + + /* Set buffer descriptor address in IDMAC */ + NAND_REG_WRITE(IDMAC_BDADDR, bd); + + nand->ecc.mode = NAND_ECC_SOFT; + nand->cmd_ctrl = axs101_nand_hwcontrol; + nand->read_byte = axs101_nand_read_byte; + nand->read_word = axs101_nand_read_word; + nand->write_buf = axs101_nand_write_buf; + nand->read_buf = axs101_nand_read_buf; + + return 0; +} diff --git a/boards.cfg b/boards.cfg index a873aaa..6fbc6b0 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1229,6 +1229,7 @@ Active sparc leon3 - gaisler - Active sparc leon3 - gaisler - gr_xc3s_1500 - - Active sparc leon3 - gaisler - grsim - - Active x86 x86 coreboot chromebook-x86 coreboot coreboot-x86 coreboot:SYS_TEXT_BASE=0x01110000 - +Active arc arc700 - synopsys - axs101 - Alexey Brodkin abrodkin@synopsys.com Active arc arc700 - synopsys - arcangel4 - Alexey Brodkin abrodkin@synopsys.com Active arc arc700 - synopsys arcangel4 arcangel4-be - Alexey Brodkin abrodkin@synopsys.com Orphan arm arm1136 mx31 - imx31_phycore imx31_phycore_eet imx31_phycore:IMX31_PHYCORE_EET (resigned) Guennadi Liakhovetski g.liakhovetski@gmx.de diff --git a/include/configs/axs101.h b/include/configs/axs101.h new file mode 100644 index 0000000..af2e63b --- /dev/null +++ b/include/configs/axs101.h @@ -0,0 +1,181 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_AXS101_H_ +#define _CONFIG_AXS101_H_ + +/* + * CPU configuration + */ +#define CONFIG_ARC700 +#define CONFIG_ARC_MMU_VER 3 +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_CLK_FREQ 750000000 +#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ + +/* dwgmac doesn't work with D$ enabled now */ +#define CONFIG_SYS_DCACHE_OFF + +/* + * Board configuration + */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ + +#define CONFIG_ARCH_EARLY_INIT_R + +#define ARC_FPGA_PERIPHERAL_BASE 0xE0000000 +#define ARC_APB_PERIPHERAL_BASE 0xF0000000 +#define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000) +#define ARC_DWGMAC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x18000) + +/* + * Memory configuration + */ +#define CONFIG_SYS_TEXT_BASE 0x81000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 Mb */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */ +#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +/* + * NAND Flash configuration + */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_NAND_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x16000) +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* + * UART configuration + * + * CONFIG_CONS_INDEX = 1 - Debug UART + * CONFIG_CONS_INDEX = 4 - FPGA UART connected to FTDI/USB + */ +#define CONFIG_CONS_INDEX 4 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#if (CONFIG_CONS_INDEX == 1) + /* Debug UART */ +# define CONFIG_SYS_NS16550_CLK 33333000 +#else + /* FPGA UARTs use different clock */ +# define CONFIG_SYS_NS16550_CLK 33333333 +#endif +#define CONFIG_SYS_NS16550_COM1 (ARC_APB_PERIPHERAL_BASE + 0x5000) +#define CONFIG_SYS_NS16550_COM2 (ARC_FPGA_PERIPHERAL_BASE + 0x20000) +#define CONFIG_SYS_NS16550_COM3 (ARC_FPGA_PERIPHERAL_BASE + 0x21000) +#define CONFIG_SYS_NS16550_COM4 (ARC_FPGA_PERIPHERAL_BASE + 0x22000) +#define CONFIG_SYS_NS16550_MEM32 + +#define CONFIG_BAUDRATE 115200 +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DW_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_ENV_EEPROM_BUS 2 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0 +#define CONFIG_SYS_I2C_BASE 0xE001D000 +#define CONFIG_SYS_I2C_BASE1 0xE001E000 +#define CONFIG_SYS_I2C_BASE2 0xE001F000 +#define CONFIG_SYS_I2C_BUS_MAX 3 +#define IC_CLK 50 + +/* + * EEPROM configuration + */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1) +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 32 + +/* + * SD/MMC configuration + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DWMMC +#define CONFIG_DOS_PARTITION + +/* + * Ethernet PHY configuration + */ +#define CONFIG_PHYLIB +#define CONFIG_MII +#define CONFIG_PHY_GIGE + +/* + * Ethernet configuration + */ +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_AUTONEG +#define CONFIG_DW_SEARCH_PHY +#define CONFIG_NET_MULTI + +/* + * Command line configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_RARP + +#define CONFIG_OF_LIBFDT + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 16 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_IN_EEPROM +#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */ +#define CONFIG_ENV_OFFSET 0 + +/* + * Environment configuration + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyS3,115200n8" +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +/* + * Console configuration + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "axs# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* + * Misc utility configuration + */ +#define CONFIG_BOUNCE_BUFFER + +#endif /* _CONFIG_AXS101_H_ */

Signed-off-by: Alexey Brodkin abrodkin@synopsys.com

Cc: Vineet Gupta vgupta@synopsys.com Cc: Francois Bedard fbedard@synopsys.com Cc: Wolfgang Denk wd@denx.de Cc: Heiko Schocher hs@denx.de --- No changes for v4.

doc/README.ARC | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 doc/README.ARC

diff --git a/doc/README.ARC b/doc/README.ARC new file mode 100644 index 0000000..5f414fb --- /dev/null +++ b/doc/README.ARC @@ -0,0 +1,27 @@ +Synopsys' DesignWare(r) ARC(r) Processors are a family of 32-bit CPUs +that SoC designers can optimize for a wide range of uses, from deeply embedded +to high-performance host applications. + +More information on ARC cores avaialble here: +http://www.synopsys.com/IP/ProcessorIP/ARCProcessors/Pages/default.aspx + +Designers can differentiate their products by using patented configuration +technology to tailor each ARC processor instance to meet specific performance, +power and area requirements. + +The DesignWare ARC processors are also extendable, allowing designers to add +their own custom instructions that dramatically increase performance. + +Synopsys' ARC processors have been used by over 170 customers worldwide who +collectively ship more than 1 billion ARC-based chips annually. + +All DesignWare ARC processors utilize a 16-/32-bit ISA that provides excellent +performance and code density for embedded and host SoC applications. + +The RISC microprocessors are synthesizable and can be implemented in any foundry +or process, and are supported by a complete suite of development tools. + +The ARC GNU toolchain with support for all ARC Processors can be downloaded +from here (available pre-built toolchains as well): + +https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases