[U-Boot] Berfore relocation.
Hai all .
I am very new to U-boot and trying to port u-boot onto MPC885 platform.
I have done necessary changes in uboot and burned the Uboot binary in NOR based FLASH.
The code is executing from FLASH and am able to see console messages.
And no messages are seen after the following
U-Boot 1.1.6 (Feb 2 2011 - 18:01:58)
CPU: MPC885ZPnn at 50 MHz: 8 kB I-Cache 8 kB D-Cache FEC present
Board: MPC885ADS
DRAM: (8 MB SDRAM) 8 MB
BEFORE RELOCATE
Can any one let me know, why this is happening and where might the problem be.
Thanks.
Ammu.
Dear Lakshmi T,
In message 002b01cbc370$fc2e0920$f48a1b60$@com you wrote:
I am very new to U-boot and trying to port u-boot onto MPC885 platform.
I have done necessary changes in uboot and burned the Uboot binary in NOR based FLASH.
The code is executing from FLASH and am able to see console messages.
And no messages are seen after the following
U-Boot 1.1.6 (Feb 2 2011 - 18:01:58)
CPU: MPC885ZPnn at 50 MHz: 8 kB I-Cache 8 kB D-Cache FEC present
Board: MPC885ADS
DRAM: (8 MB SDRAM) 8 MB
BEFORE RELOCATE
Can you please stop adding all these bogus empy lines? Thanks.
Re your problem: Please see the FAQ at http://www.denx.de/wiki/view/DULG/UBootCrashAfterRelocation
Best regards,
Wolfgang Denk
participants (2)
-
Lakshmi T -
Wolfgang Denk