The following changes since commit 29d63a59eaf1c9f3b37e249cda2a97e5e4f183f8:

ARM: uniphier: add clock/reset settings for xHCI of ProXstream2 (2016-07-24 00:44:55 +0900)

are available in the git repository at:

git://git.denx.de/u-boot-nand-flash.git

for you to fetch changes up to 59441ac3c135c412c679bdd1c82c8f2a9b805bbc:

mtd: fix compiler warnings (2016-07-24 20:36:29 -0500)

---------------------------------------------------------------- Boris Brezillon (7): cmd, nand: add an option to disable the verification when writing in raw mode sunxi: Add missing macros to configure the NAND controller clk mtd: nand: Add the sunxi NAND controller driver mtd: nand: Add a full-id entry for the H27QCG8T2E5R‐BCF NAND mtd: nand: Increase the max OOB size sunxi: nand: Increase CONFIG_SYS_NAND_MAX_ECCPOS value sunxi: Enable NAND controller on the CHIP

Brian Norris (1): mtd: nand: add common DT init code

Hector Palacios (1): mtd: nand: fix bug writing 1 byte less than page size

Maxime Ripard (1): sun5i: Add NAND controller to the sun5i DTSI

Steve Rae (1): mtd: fix compiler warnings

arch/arm/dts/sun5i-a10s.dtsi | 14 + arch/arm/dts/sun5i-a13-olinuxino.dts | 15 + arch/arm/dts/sun5i-r8-chip.dts | 15 + arch/arm/dts/sun5i.dtsi | 49 + arch/arm/include/asm/arch-sunxi/clock_sun4i.h | 5 + board/sunxi/board.c | 5 +- cmd/mtdparts.c | 4 +- cmd/nand.c | 15 +- drivers/mtd/nand/Kconfig | 8 +- drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/nand_base.c | 72 +- drivers/mtd/nand/nand_ids.c | 4 + drivers/mtd/nand/sunxi_nand.c | 1845 +++++++++++++++++++++++++ include/configs/sunxi-common.h | 3 + include/fdtdec.h | 1 + include/linux/mtd/mtd.h | 5 + include/linux/mtd/nand.h | 5 +- include/nand.h | 3 + lib/fdtdec.c | 1 + 19 files changed, 2057 insertions(+), 13 deletions(-) create mode 100644 drivers/mtd/nand/sunxi_nand.c