[U-Boot-Users] BDI config file for AMCC Bamboo
Hi All! I would like to try u-boot on the AMCC Bamboo board but I am not able to get the flashes working with the BDI2000.
I found a config file on the denx ftp site but unfortunately the [FLASH] section is missing. Does someone have a working config file *with* flash support?
Sorry for being slightly offtopic.
Thanks, -Rolf
Hi Rolf,
On Monday 22 August 2005 09:50, Rolf Offermanns wrote:
I would like to try u-boot on the AMCC Bamboo board but I am not able to get the flashes working with the BDI2000.
I found a config file on the denx ftp site but unfortunately the [FLASH] section is missing. Does someone have a working config file *with* flash support?
Please find attached 2 different config-files. As you may know, the bamboo board has two different flash banks (one 8bit width and one 16bit width). So, depending on your strapping, one of those files should do.
Viele Grüße, Stefan
participants (2)
-
Rolf Offermanns -
Stefan Roese