u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type properties in the device tree so the PHY gets configured for internal delay on RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.

Signed-off-by: Kim Phillips kim.phillips@freescale.com --- board/freescale/mpc8360emds/mpc8360emds.c | 31 +++++++++++++++++++++++++++++ 1 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index e050cd4..5918740 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -295,6 +295,7 @@ void sdram_init(void) #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { + const immap_t *immr = (immap_t *)CFG_IMMR; #if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; @@ -309,5 +310,35 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif + /* + * mpc8360ea pb mds errata 2: RGMII timing + * if on mpc8360ea rev. 2.1, + * change both ucc phy-connection-types from rgmii-id to rgmii-rxid + */ + if (immr->sysconf.spridr == SPR_8360_REV21 || + immr->sysconf.spridr == SPR_8360E_REV21) { + int nodeoffset; + void *prop; + + /* fixup UCC 1 if using rgmii-id mode */ + nodeoffset = fdt_find_node_by_path(blob, "/" OF_QE "/ucc@2000"); + if (nodeoffset >= 0) { + prop = fdt_getprop(blob, nodeoffset, + "phy-connection-type", 0); + if (prop && (strcmp(prop, "rgmii-id") == 0)) + fdt_setprop(blob, nodeoffset, "phy-connection-type", + "rgmii-rxid", sizeof("rgmii-rxid")); + } + + /* fixup UCC 2 if using rgmii-id mode */ + nodeoffset = fdt_find_node_by_path(blob, "/" OF_QE "/ucc@3000"); + if (nodeoffset >= 0) { + prop = fdt_getprop(blob, nodeoffset, + "phy-connection-type", 0); + if (prop && (strcmp(prop, "rgmii-id") == 0)) + fdt_setprop(blob, nodeoffset, "phy-connection-type", + "rgmii-rxid", sizeof("rgmii-rxid")); + } + } } #endif