[U-Boot] onenand write fail with on smdkc100
Hi All,
das-u-boot $make smdc100_config das-u-boot $make
Brought u-boot prompt on minicom using Trace32
SMDKC100 # tftp c0008000 uboot.bin
SMDKC100 # onenand erase 0 40000
SMDKC100 # onenand write c0008000 0 214c0 OneNAND write: device 0 offset 0, size 214c0 addr c0008000... 0 bytes written: ERROR
SMDKC100 # onenand write c0008000 0 40000
OneNAND write: device 0 offset 0, size 40000 addr c0008000...
What could be the problem, Am i missing anything ?
Sorry My Bad. Does not belong here.
2010/1/12 Naveen Krishna Ch naveenkrishna.ch@gmail.com
Hi All,
das-u-boot $make smdc100_config das-u-boot $make
Brought u-boot prompt on minicom using Trace32
SMDKC100 # tftp c0008000 uboot.bin
SMDKC100 # onenand erase 0 40000
SMDKC100 # onenand write c0008000 0 214c0 OneNAND write: device 0 offset 0, size 214c0 addr c0008000... 0 bytes written: ERROR
SMDKC100 # onenand write c0008000 0 40000
OneNAND write: device 0 offset 0, size 40000 addr c0008000...
What could be the problem, Am i missing anything ?
-- Shine bright, (: Naveen Krishna Ch :)
Hello,
When I try to ping some host from my board, then U-boot hang. It's going on when I send EECS signal to MEMR register. Is there hardware issue?
Thanks
participants (2)
-
Dennis Semakin -
Naveen Krishna Ch