SPL_BUILD is not a Kconfig symbol. Perhaps the intent here is to use SPL instead. However, this causes build errors, e.g. with T1024RDB_NAND

So drop the dependency on !SPL_BUILD since it does nothing.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v1)

drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e7d0ddfe25a..403d7e1c679 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -891,7 +891,7 @@ config FEC2_PHY_NORXERR

config SYS_DPAA_QBMAN bool "Device tree fixup for QBMan on freescale SOCs" - depends on (ARM || PPC) && !SPL_BUILD + depends on ARM || PPC default y if ARCH_B4860 || \ ARCH_B4420 || \ ARCH_P1023 || \

This is always enabled for U-Boot proper, so simplify the condition in the common Makefile.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: - Move earlier in the series

include/stdio.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/include/stdio.h b/include/stdio.h index 7b999a519ba..e7325795533 100644 --- a/include/stdio.h +++ b/include/stdio.h @@ -9,10 +9,7 @@ int getchar(void); int tstc(void);

/* stdout */ -#if !defined(CONFIG_SPL_BUILD) || \ - (defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_SERIAL)) || \ - (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) && \ - defined(CONFIG_SPL_SERIAL)) +#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(SERIAL) void putc(const char c); void puts(const char *s); #ifdef CONFIG_CONSOLE_FLUSH_SUPPORT

Rename this file to indicate that it refers to any non-U-Boot-proper phase, not just SPL, which is the phase immediately before U-Boot proper.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v1)

Makefile | 6 +++--- scripts/{Makefile.spl => Makefile.xpl} | 0 2 files changed, 3 insertions(+), 3 deletions(-) rename scripts/{Makefile.spl => Makefile.xpl} (100%)

diff --git a/Makefile b/Makefile index 300cee2e7f6..4378993ccfd 100644 --- a/Makefile +++ b/Makefile @@ -2094,7 +2094,7 @@ spl/u-boot-spl-dtb.hex: spl/u-boot-spl @:

spl/u-boot-spl: tools prepare $(if $(CONFIG_SPL_OF_CONTROL),dts/dt.dtb) - $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all + $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.xpl all

spl/sunxi-spl.bin: spl/u-boot-spl @: @@ -2113,14 +2113,14 @@ tpl/u-boot-tpl.bin: tpl/u-boot-tpl $(TPL_SIZE_CHECK)

tpl/u-boot-tpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb) - $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all + $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.xpl all

vpl/u-boot-vpl.bin: vpl/u-boot-vpl @: $(VPL_SIZE_CHECK)

vpl/u-boot-vpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb) - $(Q)$(MAKE) obj=vpl -f $(srctree)/scripts/Makefile.spl all + $(Q)$(MAKE) obj=vpl -f $(srctree)/scripts/Makefile.xpl all

TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)

diff --git a/scripts/Makefile.spl b/scripts/Makefile.xpl similarity index 100% rename from scripts/Makefile.spl rename to scripts/Makefile.xpl

The new name 'xPL' is intended to indicate a build of any phase which is not U-Boot proper. Define it for all such phases.

Note that we also define CONFIG_SPL_BUILD for all xPL builds. This preserves existing behaviour, but future patches will adjust that.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v1)

scripts/Makefile.autoconf | 6 +++--- scripts/Makefile.xpl | 9 +++++---- 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf index b42f9b525fe..d7544022a31 100644 --- a/scripts/Makefile.autoconf +++ b/scripts/Makefile.autoconf @@ -83,15 +83,15 @@ u-boot.cfg: include/config.h FORCE

spl/u-boot.cfg: include/config.h FORCE $(Q)mkdir -p $(dir $@) - $(call cmd,u_boot_cfg,-DCONFIG_SPL_BUILD) + $(call cmd,u_boot_cfg,-DCONFIG_XPL_BUILD -DCONFIG_SPL_BUILD)

tpl/u-boot.cfg: include/config.h FORCE $(Q)mkdir -p $(dir $@) - $(call cmd,u_boot_cfg,-DCONFIG_SPL_BUILD -DCONFIG_TPL_BUILD) + $(call cmd,u_boot_cfg,-DCONFIG_XPL_BUILD -DCONFIG_SPL_BUILD -DCONFIG_TPL_BUILD)

vpl/u-boot.cfg: include/config.h FORCE $(Q)mkdir -p $(dir $@) - $(call cmd,u_boot_cfg,-DCONFIG_SPL_BUILD -DCONFIG_VPL_BUILD) + $(call cmd,u_boot_cfg,-DCONFIG_XPL_BUILD -DCONFIG_SPL_BUILD -DCONFIG_VPL_BUILD)

include/autoconf.mk: u-boot.cfg $(call cmd,autoconf) diff --git a/scripts/Makefile.xpl b/scripts/Makefile.xpl index 3091311a3d2..ad21d451a30 100644 --- a/scripts/Makefile.xpl +++ b/scripts/Makefile.xpl @@ -21,15 +21,16 @@ include $(srctree)/scripts/Kbuild.include

-include include/config/auto.conf

-# This file contains 0, 1 or 2 lines +# This file contains 0, 2 or 3 lines # It is empty for U-Boot proper (where $(obj) is empty) -# For any xPL build it contains CONFIG_SPL_BUILD=y -# For TPL builds it has CONFIG_SPL_BUILD=y and CONFIG_TPL_BUILD=y -# For VPL builds it has CONFIG_SPL_BUILD=y and CONFIG_VPL_BUILD=y +# For any xPL build it contains CONFIG_SPL_BUILD=y and CONFIG_XPL_BUILD=y +# - for TPL builds it also contains CONFIG_TPL_BUILD=y +# - for VPL builds it also contains CONFIG_VPL_BUILD=y -include $(obj)/include/autoconf.mk

UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)

+KBUILD_CPPFLAGS += -DCONFIG_XPL_BUILD KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD ifeq ($(CONFIG_TPL_BUILD),y) KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD

This is a better name for this function, so update it.

Tidy up the function comment to mention VPL.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: - Don't update to use SPL_BUILD in the SPL check

arch/arm/mach-omap2/am33xx/board.c | 2 +- common/bloblist.c | 4 ++-- common/spl/spl.c | 4 ++-- include/spl.h | 14 ++++++++------ 4 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index abdc1e40335..548d6b7cfe4 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -526,7 +526,7 @@ EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_F, am33xx_dm_post_init); #ifdef CONFIG_DEBUG_UART_BOARD_INIT void board_debug_uart_init(void) { - if (u_boot_first_phase()) { + if (xpl_is_first_phase()) { hw_data_init(); set_uart_mux_conf(); setup_early_clocks(); diff --git a/common/bloblist.c b/common/bloblist.c index 2008ab4d25c..fb86789df42 100644 --- a/common/bloblist.c +++ b/common/bloblist.c @@ -504,13 +504,13 @@ int bloblist_init(void) * If U-Boot is not in the first phase, an existing bloblist must be * at a fixed address. */ - bool from_addr = fixed && !u_boot_first_phase(); + bool from_addr = fixed && !xpl_is_first_phase(); /* * If U-Boot is in the first phase that an arch custom routine should * install the bloblist passed from previous loader to this fixed * address. */ - bool from_boot_arg = fixed && u_boot_first_phase(); + bool from_boot_arg = fixed && xpl_is_first_phase();

if (spl_prev_phase() == PHASE_TPL && !IS_ENABLED(CONFIG_TPL_BLOBLIST)) from_addr = false; diff --git a/common/spl/spl.c b/common/spl/spl.c index c13b2b8f714..9c3bba48251 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -464,13 +464,13 @@ static int spl_common_init(bool setup_malloc) gd->malloc_ptr = 0; } #endif - ret = bootstage_init(u_boot_first_phase()); + ret = bootstage_init(xpl_is_first_phase()); if (ret) { debug("%s: Failed to set up bootstage: ret=%d\n", __func__, ret); return ret; } - if (!u_boot_first_phase()) { + if (!xpl_is_first_phase()) { ret = bootstage_unstash_default(); if (ret) log_debug("Failed to unstash bootstage: ret=%d\n", ret); diff --git a/include/spl.h b/include/spl.h index de808ccd413..fa87d865f5f 100644 --- a/include/spl.h +++ b/include/spl.h @@ -34,18 +34,20 @@ struct spl_boot_device; enum boot_device;

/* - * u_boot_first_phase() - check if this is the first U-Boot phase + * xpl_is_first_phase() - check if this is the first U-Boot phase * - * U-Boot has up to three phases: TPL, SPL and U-Boot proper. Depending on the - * build flags we can determine whether the current build is for the first + * U-Boot has up to four phases: TPL, VPL, SPL and U-Boot proper. Depending on + * the build flags we can determine whether the current build is for the first * phase of U-Boot or not. If there is no SPL, then this is U-Boot proper. If * there is SPL but no TPL, the the first phase is SPL. If there is TPL, then - * it is the first phase. + * it is the first phase, etc. * - * @returns true if this is the first phase of U-Boot + * Note that VPL can never be the first phase. If it exists, it is loaded from + * TPL * + * Return: true if this is the first phase of U-Boot */ -static inline bool u_boot_first_phase(void) +static inline bool xpl_is_first_phase(void) { if (IS_ENABLED(CONFIG_TPL)) { if (IS_ENABLED(CONFIG_TPL_BUILD))

Rename this function to indicate that it refers to any xPL phase.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v2)

Changes in v2: - Move to earlier in the series

README | 6 +++--- arch/sandbox/cpu/spl.c | 2 +- arch/sandbox/cpu/start.c | 2 +- arch/x86/cpu/apollolake/cpu_spl.c | 4 ++-- arch/x86/cpu/apollolake/hostbridge.c | 2 +- arch/x86/cpu/apollolake/lpc.c | 2 +- arch/x86/cpu/apollolake/pch.c | 2 +- arch/x86/cpu/apollolake/pmc.c | 4 ++-- arch/x86/cpu/apollolake/punit.c | 2 +- arch/x86/cpu/apollolake/spl.c | 2 +- arch/x86/cpu/broadwell/cpu.c | 2 +- arch/x86/cpu/i386/cpu.c | 2 +- arch/x86/cpu/intel_common/mrc.c | 2 +- arch/x86/cpu/intel_common/p2sb.c | 6 +++--- arch/x86/lib/fsp2/fsp_dram.c | 2 +- arch/x86/lib/fsp2/fsp_init.c | 4 ++-- boot/fdt_simplefb.c | 2 +- boot/vbe_simple_fw.c | 4 ++-- common/board_f.c | 2 +- common/bootstage.c | 2 +- common/spl/spl.c | 6 +++--- doc/develop/spl.rst | 4 +++- drivers/i2c/designware_i2c_pci.c | 4 ++-- drivers/misc/p2sb-uclass.c | 2 +- drivers/pci/pci-uclass.c | 4 ++-- drivers/pci/pci_rom.c | 4 ++-- drivers/pinctrl/intel/pinctrl.c | 6 +++--- drivers/power/acpi_pmc/acpi-pmc-uclass.c | 2 +- drivers/ram/rockchip/sdram_rk3399.c | 2 +- drivers/spi/ich.c | 4 ++-- drivers/sysreset/sysreset-uclass.c | 2 +- drivers/video/console_truetype.c | 6 +++--- drivers/video/video-uclass.c | 6 +++--- include/spl.h | 10 +++++----- lib/fdtdec.c | 2 +- lib/lmb.c | 4 ++-- lib/time.c | 2 +- 37 files changed, 64 insertions(+), 62 deletions(-)

diff --git a/README b/README index 4be1e8c22a0..c7ee06a21dd 100644 --- a/README +++ b/README @@ -1512,7 +1512,7 @@ Low Level (hardware related) configuration options: Set when the currently running compilation is for an artifact that will end up in one of the 'xPL' builds, i.e. SPL, TPL or VPL. Code that needs phase-specific behaviour can check this, - or (where possible) use spl_phase() instead. + or (where possible) use xpl_phase() instead.

Note that CONFIG_SPL_BUILD *is* always defined when either of CONFIG_TPL_BUILD / CONFIG_VPL_BUILD is defined. This can be @@ -1522,13 +1522,13 @@ Low Level (hardware related) configuration options: Set when the currently running compilation is for an artifact that will end up in the TPL build (as opposed to SPL, VPL or U-Boot proper). Code that needs phase-specific behaviour can - check this, or (where possible) use spl_phase() instead. + check this, or (where possible) use xpl_phase() instead.

- CONFIG_VPL_BUILD Set when the currently running compilation is for an artifact that will end up in the VPL build (as opposed to the SPL, TPL or U-Boot proper). Code that needs phase-specific behaviour can - check this, or (where possible) use spl_phase() instead. + check this, or (where possible) use xpl_phase() instead.

- CONFIG_ARCH_MAP_SYSMEM Generally U-Boot (and in particular the md command) uses diff --git a/arch/sandbox/cpu/spl.c b/arch/sandbox/cpu/spl.c index 6c6f4fd8c3e..7497d90fb89 100644 --- a/arch/sandbox/cpu/spl.c +++ b/arch/sandbox/cpu/spl.c @@ -27,7 +27,7 @@ int sandbox_find_next_phase(char *fname, int maxlen, bool use_img) const char *cur_prefix, *next_prefix; int ret;

- cur_prefix = spl_phase_prefix(spl_phase()); + cur_prefix = spl_phase_prefix(xpl_phase()); next_prefix = spl_phase_prefix(spl_next_phase()); ret = os_find_u_boot(fname, maxlen, use_img, cur_prefix, next_prefix); if (ret) diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c index 9ad5d46271a..4d3c806840b 100644 --- a/arch/sandbox/cpu/start.c +++ b/arch/sandbox/cpu/start.c @@ -206,7 +206,7 @@ static int sandbox_cmdline_cb_test_fdt(struct sandbox_state *state, char *relname; int len;

- if (spl_phase() <= PHASE_SPL) + if (xpl_phase() <= PHASE_SPL) relname = "../arch/sandbox/dts/test.dtb"; else relname = "arch/sandbox/dts/test.dtb"; diff --git a/arch/x86/cpu/apollolake/cpu_spl.c b/arch/x86/cpu/apollolake/cpu_spl.c index 8798fa79d4c..8198667fa50 100644 --- a/arch/x86/cpu/apollolake/cpu_spl.c +++ b/arch/x86/cpu/apollolake/cpu_spl.c @@ -184,9 +184,9 @@ int arch_cpu_init(void) { int ret = 0;

- if (spl_phase() == PHASE_TPL) + if (xpl_phase() == PHASE_TPL) ret = arch_cpu_init_tpl(); - else if (spl_phase() == PHASE_SPL) + else if (xpl_phase() == PHASE_SPL) ret = arch_cpu_init_spl(); if (ret) printf("%s: Error %d\n", __func__, ret); diff --git a/arch/x86/cpu/apollolake/hostbridge.c b/arch/x86/cpu/apollolake/hostbridge.c index 9ee362239ef..039236df02d 100644 --- a/arch/x86/cpu/apollolake/hostbridge.c +++ b/arch/x86/cpu/apollolake/hostbridge.c @@ -255,7 +255,7 @@ static int apl_hostbridge_of_to_plat(struct udevice *dev)

static int apl_hostbridge_probe(struct udevice *dev) { - if (spl_phase() == PHASE_TPL) + if (xpl_phase() == PHASE_TPL) return apl_hostbridge_early_init(dev);

return 0; diff --git a/arch/x86/cpu/apollolake/lpc.c b/arch/x86/cpu/apollolake/lpc.c index 531ff1cd91f..f34c199bf73 100644 --- a/arch/x86/cpu/apollolake/lpc.c +++ b/arch/x86/cpu/apollolake/lpc.c @@ -80,7 +80,7 @@ int lpc_open_pmio_window(uint base, uint size)

lgir_reg_num = find_unused_pmio_window(); if (lgir_reg_num < 0) { - if (spl_phase() > PHASE_TPL) { + if (xpl_phase() > PHASE_TPL) { log_err("LPC: Cannot open IO window: %lx size %lx\n", bridge_base, size - bridged_size); log_err("No more IO windows\n"); diff --git a/arch/x86/cpu/apollolake/pch.c b/arch/x86/cpu/apollolake/pch.c index 32190312ff8..07ef26f6bde 100644 --- a/arch/x86/cpu/apollolake/pch.c +++ b/arch/x86/cpu/apollolake/pch.c @@ -12,7 +12,7 @@

static int apl_set_spi_protect(struct udevice *dev, bool protect) { - if (spl_phase() == PHASE_SPL) + if (xpl_phase() == PHASE_SPL) return lpc_set_spi_protect(dev, BIOS_CTRL, protect);

return 0; diff --git a/arch/x86/cpu/apollolake/pmc.c b/arch/x86/cpu/apollolake/pmc.c index 32fd0344861..bfb8a07d47a 100644 --- a/arch/x86/cpu/apollolake/pmc.c +++ b/arch/x86/cpu/apollolake/pmc.c @@ -115,7 +115,7 @@ int apl_pmc_ofdata_to_uc_plat(struct udevice *dev) ARRAY_SIZE(base)); if (ret) return log_msg_ret("Missing/short early-regs", ret); - if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { upriv->pmc_bar0 = (void *)base[0]; upriv->pmc_bar2 = (void *)base[2];

@@ -186,7 +186,7 @@ static int enable_pmcbar(struct udevice *dev)

static int apl_pmc_probe(struct udevice *dev) { - if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { return enable_pmcbar(dev); } else { struct acpi_pmc_upriv *upriv = dev_get_uclass_priv(dev); diff --git a/arch/x86/cpu/apollolake/punit.c b/arch/x86/cpu/apollolake/punit.c index b1503c25140..9c708e9df55 100644 --- a/arch/x86/cpu/apollolake/punit.c +++ b/arch/x86/cpu/apollolake/punit.c @@ -77,7 +77,7 @@ static int punit_init(struct udevice *dev)

static int apl_punit_probe(struct udevice *dev) { - if (spl_phase() == PHASE_SPL) + if (xpl_phase() == PHASE_SPL) return punit_init(dev);

return 0; diff --git a/arch/x86/cpu/apollolake/spl.c b/arch/x86/cpu/apollolake/spl.c index b351d73e7d8..510f8c4350f 100644 --- a/arch/x86/cpu/apollolake/spl.c +++ b/arch/x86/cpu/apollolake/spl.c @@ -116,7 +116,7 @@ static int spl_fast_spi_load_image(struct spl_image_info *spl_image, return ret;

spl_image->size = CONFIG_SYS_MONITOR_LEN; /* We don't know SPL size */ - spl_image->entry_point = spl_phase() == PHASE_TPL ? + spl_image->entry_point = xpl_phase() == PHASE_TPL ? CONFIG_SPL_TEXT_BASE : CONFIG_TEXT_BASE; spl_image->load_addr = spl_image->entry_point; spl_image->os = IH_OS_U_BOOT; diff --git a/arch/x86/cpu/broadwell/cpu.c b/arch/x86/cpu/broadwell/cpu.c index dc6717eca40..87463748c4d 100644 --- a/arch/x86/cpu/broadwell/cpu.c +++ b/arch/x86/cpu/broadwell/cpu.c @@ -68,7 +68,7 @@ int arch_cpu_init(void) post_code(POST_CPU_INIT);

/* Do a mini-init if TPL has already done the full init */ - if (IS_ENABLED(CONFIG_TPL) && spl_phase() != PHASE_TPL) + if (IS_ENABLED(CONFIG_TPL) && xpl_phase() != PHASE_TPL) return x86_cpu_reinit_f(); else return x86_cpu_init_f(); diff --git a/arch/x86/cpu/i386/cpu.c b/arch/x86/cpu/i386/cpu.c index 934e98ac582..d837fb97982 100644 --- a/arch/x86/cpu/i386/cpu.c +++ b/arch/x86/cpu/i386/cpu.c @@ -271,7 +271,7 @@ static void identify_cpu(struct cpu_device_id *cpu) * Do a quick and dirty check to save space - Intel and AMD only and * just the vendor. This is enough for most TPL code. */ - if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { struct cpuid_result result;

result = cpuid(0x00000000); diff --git a/arch/x86/cpu/intel_common/mrc.c b/arch/x86/cpu/intel_common/mrc.c index c834c05d130..baa1f0e32d6 100644 --- a/arch/x86/cpu/intel_common/mrc.c +++ b/arch/x86/cpu/intel_common/mrc.c @@ -259,7 +259,7 @@ int mrc_common_init(struct udevice *dev, void *pei_data, bool use_asm_linkage) return ret;

delay = dev_read_u32_default(dev, "fspm,training-delay", 0); - if (spl_phase() == PHASE_SPL) { + if (xpl_phase() == PHASE_SPL) { if (delay) printf("SDRAM training (%d seconds)...", delay); else diff --git a/arch/x86/cpu/intel_common/p2sb.c b/arch/x86/cpu/intel_common/p2sb.c index 7aad8f8ca56..406c41013fc 100644 --- a/arch/x86/cpu/intel_common/p2sb.c +++ b/arch/x86/cpu/intel_common/p2sb.c @@ -96,7 +96,7 @@ int p2sb_of_to_plat(struct udevice *dev) return log_msg_ret("Missing/short early-regs", ret); plat->mmio_base = base[0]; /* TPL sets up the initial BAR */ - if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { plat->bdf = pci_get_devfn(dev); if (plat->bdf < 0) return log_msg_ret("Cannot get p2sb PCI address", @@ -114,9 +114,9 @@ int p2sb_of_to_plat(struct udevice *dev)

static int p2sb_probe(struct udevice *dev) { - if (spl_phase() == PHASE_TPL) + if (xpl_phase() == PHASE_TPL) return p2sb_early_init(dev); - else if (spl_phase() == PHASE_SPL) + else if (xpl_phase() == PHASE_SPL) return p2sb_spl_init(dev);

return 0; diff --git a/arch/x86/lib/fsp2/fsp_dram.c b/arch/x86/lib/fsp2/fsp_dram.c index a50dc985a3c..4c4c8334bdb 100644 --- a/arch/x86/lib/fsp2/fsp_dram.c +++ b/arch/x86/lib/fsp2/fsp_dram.c @@ -28,7 +28,7 @@ int dram_init(void)

return 0; } - if (spl_phase() == PHASE_SPL) { + if (xpl_phase() == PHASE_SPL) { bool s3wake = false;

s3wake = IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) && diff --git a/arch/x86/lib/fsp2/fsp_init.c b/arch/x86/lib/fsp2/fsp_init.c index ecbadaae75c..1a2bf46c5c5 100644 --- a/arch/x86/lib/fsp2/fsp_init.c +++ b/arch/x86/lib/fsp2/fsp_init.c @@ -25,7 +25,7 @@ int fsp_setup_pinctrl(void) int ret;

/* Make sure pads are set up early in U-Boot */ - if (!ll_boot_init() || spl_phase() != PHASE_BOARD_F) + if (!ll_boot_init() || xpl_phase() != PHASE_BOARD_F) return 0;

/* Probe all pinctrl devices to set up the pads */ @@ -134,7 +134,7 @@ int fsp_locate_fsp(enum fsp_type_t type, struct binman_entry *entry, return log_msg_ret("Could not get flash mmap", ret); }

- if (spl_phase() >= PHASE_BOARD_F) { + if (xpl_phase() >= PHASE_BOARD_F) { if (type != FSP_S) return -EPROTONOSUPPORT; ret = binman_entry_find("intel-fsp-s", entry); diff --git a/boot/fdt_simplefb.c b/boot/fdt_simplefb.c index 53415548459..71b833eb9bd 100644 --- a/boot/fdt_simplefb.c +++ b/boot/fdt_simplefb.c @@ -27,7 +27,7 @@ static int fdt_simplefb_configure_node(void *blob, int off) struct udevice *dev; int ret;

- if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && spl_phase() > PHASE_SPL) { + if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && xpl_phase() > PHASE_SPL) { struct video_handoff *ho;

ho = bloblist_find(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho)); diff --git a/boot/vbe_simple_fw.c b/boot/vbe_simple_fw.c index 4d6da9490a7..da9701f9eb9 100644 --- a/boot/vbe_simple_fw.c +++ b/boot/vbe_simple_fw.c @@ -157,7 +157,7 @@ static int simple_load_from_image(struct spl_image_info *spl_image, struct vbe_handoff *handoff; int ret;

- if (spl_phase() != PHASE_VPL && spl_phase() != PHASE_SPL) + if (xpl_phase() != PHASE_VPL && xpl_phase() != PHASE_SPL) return -ENOENT;

ret = bloblist_ensure_size(BLOBLISTT_VBE, sizeof(struct vbe_handoff), @@ -197,7 +197,7 @@ static int simple_load_from_image(struct spl_image_info *spl_image, bootflow_free(&bflow);

/* Record that VBE was used in this phase */ - handoff->phases |= 1 << spl_phase(); + handoff->phases |= 1 << xpl_phase();

return 0; } diff --git a/common/board_f.c b/common/board_f.c index 154675d0e40..f1bd70fdd6c 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -397,7 +397,7 @@ __weak int arch_reserve_mmu(void)

static int reserve_video_from_videoblob(void) { - if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && spl_phase() > PHASE_SPL) { + if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && xpl_phase() > PHASE_SPL) { struct video_handoff *ho; int ret = 0;

diff --git a/common/bootstage.c b/common/bootstage.c index 49acc9078a6..dca33148192 100644 --- a/common/bootstage.c +++ b/common/bootstage.c @@ -489,7 +489,7 @@ int bootstage_unstash(const void *base, int size) for (rec = data->record + data->next_id, i = 0; i < hdr->count; i++, rec++) { rec->name = ptr; - if (spl_phase() == PHASE_SPL) + if (xpl_phase() == PHASE_SPL) rec->name = strdup(ptr);

/* Assume no data corruption here */ diff --git a/common/spl/spl.c b/common/spl/spl.c index 9ed91929ee1..6c297ebf37a 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -441,7 +441,7 @@ static inline int write_spl_handoff(void) { return 0; } */ static enum bootstage_id get_bootstage_id(bool start) { - enum xpl_phase_t phase = spl_phase(); + enum xpl_phase_t phase = xpl_phase();

if (IS_ENABLED(CONFIG_TPL_BUILD) && phase == PHASE_TPL) return start ? BOOTSTAGE_ID_START_TPL : BOOTSTAGE_ID_END_TPL; @@ -476,7 +476,7 @@ static int spl_common_init(bool setup_malloc) log_debug("Failed to unstash bootstage: ret=%d\n", ret); } bootstage_mark_name(get_bootstage_id(true), - spl_phase_name(spl_phase())); + spl_phase_name(xpl_phase())); #if CONFIG_IS_ENABLED(LOG) ret = log_init(); if (ret) { @@ -493,7 +493,7 @@ static int spl_common_init(bool setup_malloc) } if (CONFIG_IS_ENABLED(DM)) { bootstage_start(BOOTSTAGE_ID_ACCUM_DM_SPL, - spl_phase() == PHASE_TPL ? "dm tpl" : "dm_spl"); + xpl_phase() == PHASE_TPL ? "dm tpl" : "dm_spl"); /* With CONFIG_SPL_OF_PLATDATA, bring in all devices */ ret = dm_init_and_scan(!CONFIG_IS_ENABLED(OF_PLATDATA)); bootstage_accum(BOOTSTAGE_ID_ACCUM_DM_SPL); diff --git a/doc/develop/spl.rst b/doc/develop/spl.rst index 4bb48e6b7b3..a92110e4fa9 100644 --- a/doc/develop/spl.rst +++ b/doc/develop/spl.rst @@ -34,6 +34,8 @@ For example:: foo(); #endif

+ if (xpl_phase() == PHASE_TPL) + bar();

The building of SPL images can be enabled by CONFIG_SPL option in Kconfig.

@@ -117,7 +119,7 @@ Further usages of U-Boot SPL comprise: Checking the boot phase -----------------------

-Use `spl_phase()` to find the current U-Boot phase, e.g. `PHASE_SPL`. You can +Use `xpl_phase()` to find the current U-Boot phase, e.g. `PHASE_SPL`. You can also find the previous and next phase and get the phase name.

diff --git a/drivers/i2c/designware_i2c_pci.c b/drivers/i2c/designware_i2c_pci.c index 11c98672265..c21c412231c 100644 --- a/drivers/i2c/designware_i2c_pci.c +++ b/drivers/i2c/designware_i2c_pci.c @@ -37,7 +37,7 @@ static int designware_i2c_pci_of_to_plat(struct udevice *dev) { struct dw_i2c *priv = dev_get_priv(dev);

- if (spl_phase() < PHASE_SPL) { + if (xpl_phase() < PHASE_SPL) { u32 base; int ret;

@@ -53,7 +53,7 @@ static int designware_i2c_pci_of_to_plat(struct udevice *dev) PCI_COMMAND_MASTER); }

- if (spl_phase() < PHASE_BOARD_F) { + if (xpl_phase() < PHASE_BOARD_F) { /* Handle early, fixed mapping into a different address space */ priv->regs = (struct i2c_regs *)dm_pci_read_bar32(dev, 0); } else { diff --git a/drivers/misc/p2sb-uclass.c b/drivers/misc/p2sb-uclass.c index 016c8073378..d7ce0383ac9 100644 --- a/drivers/misc/p2sb-uclass.c +++ b/drivers/misc/p2sb-uclass.c @@ -198,7 +198,7 @@ static int p2sb_child_post_bind(struct udevice *dev)

static int p2sb_post_bind(struct udevice *dev) { - if (spl_phase() > PHASE_TPL && !CONFIG_IS_ENABLED(OF_PLATDATA)) + if (xpl_phase() > PHASE_TPL && !CONFIG_IS_ENABLED(OF_PLATDATA)) return dm_scan_fdt_dev(dev);

return 0; diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 6571e653049..59894d2430b 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -722,7 +722,7 @@ static bool pci_need_device_pre_reloc(struct udevice *bus, uint vendor, u32 vendev; int index;

- if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(PCI_PNP)) + if (xpl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(PCI_PNP)) return true;

for (index = 0; @@ -798,7 +798,7 @@ static int pci_find_and_bind_driver(struct udevice *parent, if (!(gd->flags & GD_FLG_RELOC) && !(drv->flags & DM_FLAG_PRE_RELOC) && (!CONFIG_IS_ENABLED(PCI_PNP) || - spl_phase() != PHASE_SPL)) + xpl_phase() != PHASE_SPL)) return log_msg_ret("pre", -EPERM);

/* diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c index 78e5de937cd..2753df275ca 100644 --- a/drivers/pci/pci_rom.c +++ b/drivers/pci/pci_rom.c @@ -379,7 +379,7 @@ int vesa_setup_video(struct udevice *dev, int (*int15_handler)(void)) }

/* In U-Boot proper, collect the information added by SPL (see below) */ - if (IS_ENABLED(CONFIG_SPL_VIDEO) && spl_phase() > PHASE_SPL && + if (IS_ENABLED(CONFIG_SPL_VIDEO) && xpl_phase() > PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { struct video_handoff *ho;

@@ -425,7 +425,7 @@ int vesa_setup_video(struct udevice *dev, int (*int15_handler)(void)) mode_info.vesa.bits_per_pixel);

/* In SPL, store the information for use by U-Boot proper */ - if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { + if (xpl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { struct video_handoff *ho;

ho = bloblist_add(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho), 0); diff --git a/drivers/pinctrl/intel/pinctrl.c b/drivers/pinctrl/intel/pinctrl.c index 6cfe83a593a..19525f82a22 100644 --- a/drivers/pinctrl/intel/pinctrl.c +++ b/drivers/pinctrl/intel/pinctrl.c @@ -273,7 +273,7 @@ static int pinctrl_configure_itss(struct udevice *dev, irq = pcr_read32(dev, PAD_CFG1_OFFSET(pad_cfg_offset)); irq &= PAD_CFG1_IRQ_MASK; if (!irq) { - if (spl_phase() > PHASE_TPL) + if (xpl_phase() > PHASE_TPL) log_err("GPIO %u doesn't support APIC routing\n", cfg->pad);

@@ -315,7 +315,7 @@ static int pinctrl_pad_reset_config_override(const struct pad_community *comm, return config_value; } } - if (spl_phase() > PHASE_TPL) + if (xpl_phase() > PHASE_TPL) log_err("Logical-to-Chipset mapping not found\n");

return -ENOENT; @@ -622,7 +622,7 @@ int intel_pinctrl_of_to_plat(struct udevice *dev, struct intel_pinctrl_priv *priv = dev_get_priv(dev);

if (!comm) { - if (spl_phase() > PHASE_TPL) + if (xpl_phase() > PHASE_TPL) log_err("Cannot find community for pid %d\n", pplat->pid); return -EDOM; diff --git a/drivers/power/acpi_pmc/acpi-pmc-uclass.c b/drivers/power/acpi_pmc/acpi-pmc-uclass.c index c289cede15b..1e94104091e 100644 --- a/drivers/power/acpi_pmc/acpi-pmc-uclass.c +++ b/drivers/power/acpi_pmc/acpi-pmc-uclass.c @@ -60,7 +60,7 @@ int pmc_gpe_init(struct udevice *dev) * are different and if they aren't, use the reset values. */ if (dw[0] == dw[1] || dw[1] == dw[2]) { - if (spl_phase() > PHASE_TPL) + if (xpl_phase() > PHASE_TPL) log_info("PMC: Using default GPE route"); gpio_cfg = readl(upriv->gpe_cfg); for (i = 0; i < upriv->gpe0_count; i++) diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index 45270e27184..7f8a6ba8410 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -193,7 +193,7 @@ struct io_setting { */ static bool phase_sdram_init(void) { - return spl_phase() == PHASE_TPL || + return xpl_phase() == PHASE_TPL || (!IS_ENABLED(CONFIG_TPL) && !IS_ENABLED(CONFIG_ROCKCHIP_EXTERNAL_TPL) && !spl_in_proper()); diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c index e48ca65fe72..2264ca83d66 100644 --- a/drivers/spi/ich.c +++ b/drivers/spi/ich.c @@ -779,7 +779,7 @@ static int ich_init_controller(struct udevice *dev, struct ich_spi_plat *plat, struct ich_spi_priv *ctlr) { - if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { struct ich_spi_plat *plat = dev_get_plat(dev); int ret;

@@ -867,7 +867,7 @@ static int ich_spi_probe(struct udevice *dev) if (ret) return ret;

- if (spl_phase() == PHASE_TPL) { + if (xpl_phase() == PHASE_TPL) { /* Cache the BIOS to speed things up */ ret = ich_cache_bios_region(dev); if (ret) diff --git a/drivers/sysreset/sysreset-uclass.c b/drivers/sysreset/sysreset-uclass.c index d30b008bf9a..536ac727142 100644 --- a/drivers/sysreset/sysreset-uclass.c +++ b/drivers/sysreset/sysreset-uclass.c @@ -102,7 +102,7 @@ void sysreset_walk_halt(enum sysreset_t type) mdelay(100);

/* Still no reset? Give up */ - if (spl_phase() <= PHASE_SPL) + if (xpl_phase() <= PHASE_SPL) log_err("no sysreset\n"); else log_err("System reset not supported on this platform\n"); diff --git a/drivers/video/console_truetype.c b/drivers/video/console_truetype.c index c435162d3f9..17a29817664 100644 --- a/drivers/video/console_truetype.c +++ b/drivers/video/console_truetype.c @@ -802,7 +802,7 @@ static int truetype_entry_save(struct udevice *dev, struct abuf *buf) struct console_tt_store store; const uint size = sizeof(store);

- if (spl_phase() <= PHASE_SPL) + if (xpl_phase() <= PHASE_SPL) return -ENOSYS;

/* @@ -826,7 +826,7 @@ static int truetype_entry_restore(struct udevice *dev, struct abuf *buf) struct console_tt_priv *priv = dev_get_priv(dev); struct console_tt_store store;

- if (spl_phase() <= PHASE_SPL) + if (xpl_phase() <= PHASE_SPL) return -ENOSYS;

memcpy(&store, abuf_data(buf), sizeof(store)); @@ -853,7 +853,7 @@ static int truetype_set_cursor_visible(struct udevice *dev, bool visible, uint out, val; int ret;

- if (spl_phase() <= PHASE_SPL) + if (xpl_phase() <= PHASE_SPL) return -ENOSYS;

if (!visible) diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c index 41bb7647fda..9823673f817 100644 --- a/drivers/video/video-uclass.c +++ b/drivers/video/video-uclass.c @@ -128,7 +128,7 @@ int video_reserve(ulong *addrp) struct udevice *dev; ulong size;

- if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && spl_phase() == PHASE_BOARD_F) + if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && xpl_phase() == PHASE_BOARD_F) return 0;

gd->video_top = *addrp; @@ -421,7 +421,7 @@ bool video_is_active(void) struct udevice *dev;

/* Assume video to be active if SPL passed video hand-off to U-boot */ - if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && spl_phase() > PHASE_SPL) + if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && xpl_phase() > PHASE_SPL) return true;

for (uclass_find_first_device(UCLASS_VIDEO, &dev); @@ -573,7 +573,7 @@ static int video_post_probe(struct udevice *dev) * NOTE: * This assumes that reserved video memory only uses a single framebuffer */ - if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { + if (xpl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { struct video_handoff *ho;

ho = bloblist_add(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho), 0); diff --git a/include/spl.h b/include/spl.h index 6d44b627259..bf011139548 100644 --- a/include/spl.h +++ b/include/spl.h @@ -74,7 +74,7 @@ enum xpl_phase_t { };

/** - * spl_phase() - Find out the phase of U-Boot + * xpl_phase() - Find out the phase of U-Boot * * This can be used to avoid #ifdef logic and use if() instead. * @@ -86,7 +86,7 @@ enum xpl_phase_t { * * but with this you can use: * - * if (spl_phase() == PHASE_TPL) { + * if (xpl_phase() == PHASE_TPL) { * ... * } * @@ -98,7 +98,7 @@ enum xpl_phase_t { * * but with this you can use: * - * if (spl_phase() == PHASE_SPL) { + * if (xpl_phase() == PHASE_SPL) { * ... * } * @@ -110,13 +110,13 @@ enum xpl_phase_t { * * but with this you can use: * - * if (spl_phase() == PHASE_BOARD_F) { + * if (xpl_phase() == PHASE_BOARD_F) { * ... * } * * Return: U-Boot phase */ -static inline enum xpl_phase_t spl_phase(void) +static inline enum xpl_phase_t xpl_phase(void) { #ifdef CONFIG_TPL_BUILD return PHASE_TPL; diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 5edc8dd2f9f..ab054190221 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -608,7 +608,7 @@ int fdtdec_get_chosen_node(const void *blob, const char *name) static int fdtdec_prepare_fdt(const void *blob) { if (!blob || ((uintptr_t)blob & 3) || fdt_check_header(blob)) { - if (spl_phase() <= PHASE_SPL) { + if (xpl_phase() <= PHASE_SPL) { puts("Missing DTB\n"); } else { printf("No valid device tree binary found at %p\n", diff --git a/lib/lmb.c b/lib/lmb.c index 3ed570fb29b..380d92a6718 100644 --- a/lib/lmb.c +++ b/lib/lmb.c @@ -749,9 +749,9 @@ int lmb_init(void) lmb_add_memory();

/* Reserve the U-Boot image region once U-Boot has relocated */ - if (spl_phase() == PHASE_SPL) + if (xpl_phase() == PHASE_SPL) lmb_reserve_common_spl(); - else if (spl_phase() == PHASE_BOARD_R) + else if (xpl_phase() == PHASE_BOARD_R) lmb_reserve_common((void *)gd->fdt_blob);

return 0; diff --git a/lib/time.c b/lib/time.c index 872f73d521e..d88edafb196 100644 --- a/lib/time.c +++ b/lib/time.c @@ -100,7 +100,7 @@ uint64_t notrace get_ticks(void)

ret = timer_get_count(gd->timer, &count); if (ret) { - if (spl_phase() > PHASE_TPL) + if (xpl_phase() > PHASE_TPL) panic("Could not read count from timer (err %d)\n", ret); else

Add the opposite function to not_xpl() for completeness.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v1)

include/spl.h | 10 ++++++++++ 1 file changed, 10 insertions(+)

diff --git a/include/spl.h b/include/spl.h index 948486164d9..fe2df78b0a6 100644 --- a/include/spl.h +++ b/include/spl.h @@ -144,6 +144,16 @@ static inline bool not_xpl(void) return true; }

+/* returns true if in xPL, false if in U-Boot proper */ +static inline bool is_xpl(void) +{ +#ifdef CONFIG_XPL_BUILD + return true; +#endif + + return false; +} + /** * spl_prev_phase() - Figure out the previous U-Boot phase *

Use simpler names for these functions.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v1)

arch/sandbox/cpu/spl.c | 4 ++-- arch/x86/lib/tpl.c | 2 +- cmd/vbe.c | 2 +- common/spl/spl.c | 5 ++--- include/spl.h | 8 ++++---- 5 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/arch/sandbox/cpu/spl.c b/arch/sandbox/cpu/spl.c index 71d785f4c3e..c50df5f9179 100644 --- a/arch/sandbox/cpu/spl.c +++ b/arch/sandbox/cpu/spl.c @@ -27,8 +27,8 @@ int sandbox_find_next_phase(char *fname, int maxlen, bool use_img) const char *cur_prefix, *next_prefix; int ret;

- cur_prefix = spl_phase_prefix(xpl_phase()); - next_prefix = spl_phase_prefix(xpl_next_phase()); + cur_prefix = xpl_prefix(xpl_phase()); + next_prefix = xpl_prefix(xpl_next_phase()); ret = os_find_u_boot(fname, maxlen, use_img, cur_prefix, next_prefix); if (ret) return log_msg_ret("find", ret); diff --git a/arch/x86/lib/tpl.c b/arch/x86/lib/tpl.c index 0606b4a1c67..f7df7e03621 100644 --- a/arch/x86/lib/tpl.c +++ b/arch/x86/lib/tpl.c @@ -103,7 +103,7 @@ int spl_spi_load_image(void)

void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { - debug("Jumping to %s at %lx\n", spl_phase_name(xpl_next_phase()), + debug("Jumping to %s at %lx\n", xpl_name(xpl_next_phase()), (ulong)spl_image->entry_point); #ifdef DEBUG print_buffer(spl_image->entry_point, (void *)spl_image->entry_point, 1, diff --git a/cmd/vbe.c b/cmd/vbe.c index 423d9e5f8f0..186f6e6860d 100644 --- a/cmd/vbe.c +++ b/cmd/vbe.c @@ -93,7 +93,7 @@ static int do_vbe_state(struct cmd_tbl *cmdtp, int flag, int argc, printf("Phases:"); for (i = PHASE_NONE; i < PHASE_COUNT; i++) { if (handoff->phases & (1 << i)) - printf(" %s", spl_phase_name(i)); + printf(" %s", xpl_name(i));

} if (!handoff->phases) diff --git a/common/spl/spl.c b/common/spl/spl.c index ad5c309348b..9748a3fb3e9 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -475,8 +475,7 @@ static int spl_common_init(bool setup_malloc) if (ret) log_debug("Failed to unstash bootstage: ret=%d\n", ret); } - bootstage_mark_name(get_bootstage_id(true), - spl_phase_name(xpl_phase())); + bootstage_mark_name(get_bootstage_id(true), xpl_name(xpl_phase())); #if CONFIG_IS_ENABLED(LOG) ret = log_init(); if (ret) { @@ -762,7 +761,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)

os = spl_image.os; if (os == IH_OS_U_BOOT) { - debug("Jumping to %s...\n", spl_phase_name(xpl_next_phase())); + debug("Jumping to %s...\n", xpl_name(xpl_next_phase())); } else if (CONFIG_IS_ENABLED(ATF) && os == IH_OS_ARM_TRUSTED_FIRMWARE) { debug("Jumping to U-Boot via ARM Trusted Firmware\n"); spl_fixup_fdt(spl_image_fdt_addr(&spl_image)); diff --git a/include/spl.h b/include/spl.h index 50ffe4f79f9..b2978d8bbaf 100644 --- a/include/spl.h +++ b/include/spl.h @@ -194,11 +194,11 @@ static inline enum xpl_phase_t xpl_next_phase(void) }

/** - * spl_phase_name() - Get the name of the current phase + * xpl_name() - Get the name of a phase * * Return: phase name */ -static inline const char *spl_phase_name(enum xpl_phase_t phase) +static inline const char *xpl_name(enum xpl_phase_t phase) { switch (phase) { case PHASE_TPL: @@ -216,12 +216,12 @@ static inline const char *spl_phase_name(enum xpl_phase_t phase) }

/** - * spl_phase_prefix() - Get the prefix of the current phase + * xpl_prefix() - Get the prefix of the current phase * * @phase: Phase to look up * Return: phase prefix ("spl", "tpl", etc.) */ -static inline const char *spl_phase_prefix(enum xpl_phase_t phase) +static inline const char *xpl_prefix(enum xpl_phase_t phase) { switch (phase) { case PHASE_TPL:

Update the various references to SPL in this document. Make sure to refer to 'phases' instead of 'stages', which is not a U-Boot term.

Fix a few U-boot typos and try to improve grammar a little while we are here.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v2)

Changes in v2: - Move to earlier in the series

doc/develop/spl.rst | 79 +++++++++++++++++++++++---------------------- 1 file changed, 41 insertions(+), 38 deletions(-)

diff --git a/doc/develop/spl.rst b/doc/develop/spl.rst index a92110e4fa9..aa6d28fa333 100644 --- a/doc/develop/spl.rst +++ b/doc/develop/spl.rst @@ -1,11 +1,12 @@ -Generic SPL framework +Generic xPL framework =====================

Overview --------

-To unify all existing implementations for a secondary program loader (SPL) -and to allow simply adding of new implementations this generic SPL framework +To unify all existing implementations for secondary/tertiary program loaders +(generically called xPL) +and to allow simply adding of new implementations this generic xPL framework has been created. With this framework almost all source files for a board can be reused. No code duplication or symlinking is necessary anymore.

@@ -13,38 +14,39 @@ can be reused. No code duplication or symlinking is necessary anymore. How it works ------------

-The object files for SPL are built separately and placed in the "spl" directory. -The final binaries which are generated are u-boot-spl, u-boot-spl.bin and -u-boot-spl.map. +The object files for xPL are built separately and placed in a subdirectory +("spl", "tpl" or "vpl"). +The final binaries which are generated for SPL are u-boot-spl, u-boot-spl.bin +and u-boot-spl.map

-A config option named CONFIG_SPL_BUILD is enabled by Kconfig for SPL. -Source files can therefore be compiled for SPL with different settings. +A config option named CONFIG_XPL_BUILD is enabled by Kconfig for xPL builds. +Source files can therefore be compiled for xPL with different settings.

For example::

- ifeq ($(CONFIG_SPL_BUILD),y) + ifeq ($(CONFIG_XPL_BUILD),y) obj-y += board_spl.o else obj-y += board.o endif

- obj-$(CONFIG_SPL_BUILD) += foo.o + obj-$(CONFIG_XPL_BUILD) += foo.o

- #ifdef CONFIG_SPL_BUILD + if (IS_ENABLED(CONFIG_XPL_BUILD)) foo(); - #endif

if (xpl_phase() == PHASE_TPL) bar();

-The building of SPL images can be enabled by CONFIG_SPL option in Kconfig. +The building of xPL images can be enabled by CONFIG_SPL (etc.) options in +Kconfig.

-Because SPL images normally have a different text base, one has to be -configured by defining CONFIG_SPL_TEXT_BASE. The linker script has to be -defined with CONFIG_SPL_LDSCRIPT. +Because xPL images normally have a different text base, one has to be +configured by defining CONFIG_xPL_TEXT_BASE. The linker script has to be +defined with CONFIG_xPL_LDSCRIPT.

-To support generic U-Boot libraries and drivers in the SPL binary one can -optionally define CONFIG_SPL_XXX_SUPPORT. Currently following options +To support generic U-Boot libraries and drivers in the xPL binary one can +optionally define CONFIG_xPL_XXX_SUPPORT. Currently following options are supported:

CONFIG_SPL_LIBCOMMON_SUPPORT (common/libcommon.o) @@ -77,7 +79,7 @@ CONFIG_SPL_DM_GPIO (drivers/gpio/gpio-uclass.o) CONFIG_SPL_BMP (drivers/video/bmp.o) CONFIG_SPL_BLOBLIST (common/bloblist.o)

-Adding SPL-specific code +Adding xPL-specific code ------------------------

To check whether a feature is enabled, use CONFIG_IS_ENABLED():: @@ -92,7 +94,7 @@ U-Boot Boot Phases ------------------

U-Boot goes through the following boot phases where TPL, VPL, SPL are optional. -While many boards use SPL, less use TPL. +While many boards use SPL, fewer use TPL.

TPL Very early init, as tiny as possible. This loads SPL (or VPL if enabled). @@ -179,29 +181,30 @@ files instead introduces another set of headaches. These warnings are not usually important to understanding the flow, however.

-Reserving memory in SPL +Reserving memory in xPL -----------------------

-If memory needs to be reserved in RAM during SPL stage with the requirement that -the SPL reserved memory remains preserved across further boot stages too +If memory needs to be reserved in RAM during an xPL phase with the requirement +that the xPL reserved memory remains preserved across further boot phases too then it needs to be reserved mandatorily starting from end of RAM. This is to -ensure that further stages can simply skip this region before carrying out +ensure that further phases can simply skip this region before carrying out further reservations or updating the relocation address.

-Also out of these regions which are to be preserved across further stages of +Also out of these regions which are to be preserved across further phases of boot, video framebuffer memory region must be reserved first starting from -end of RAM for which helper function spl_reserve_video_from_ram_top is provided -which makes sure that video memory is placed at top of reservation area with +end of RAM for which the helper function spl_reserve_video_from_ram_top() is +provided +which makes sure that video memory is placed at the top of reservation area with further reservations below it.

-The corresponding information of reservation for those regions can be passed to -further boot stages using a bloblist. For e.g. the information for -framebuffer area reserved by SPL can be passed onto U-boot using -BLOBLISTT_U_BOOT_VIDEO. - -The further boot stages need to parse each of the bloblist passed from SPL stage -starting from video bloblist and skip this whole SPL reserved memory area from -end of RAM as per the bloblists received, before carrying out further -reservations or updating the relocation address. For e.g, U-boot proper uses -function "setup_relocaddr_from_bloblist" to parse the bloblists passed from -previous stage and skip the memory reserved from previous stage accordingly. +The reservation information for these regions can be passed to the +further boot phases using a bloblist. For e.g. the information for the +framebuffer area reserved by xPL can be passed onto U-Boot using +BLOBLISTT_U_BOOT_VIDEO + +The further boot phases need to parse each of the blobs passed from xPL phase +starting from video bloblist and skip this whole xPL reserved-memory area from +end of RAM as per the blobs received, before carrying out further +reservations or updating the relocation address. For e.g, U-Boot proper uses +function setup_relocaddr_from_bloblist() to parse the bloblist passed from +previous phase and skip the memory reserved from previous phase accordingly.

Move this section to rst, changing it just enough so that it builds.

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: - Move to earlier in the series

README | 82 -------------------------------------- doc/develop/index.rst | 1 + doc/develop/init.rst | 92 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 93 insertions(+), 82 deletions(-) create mode 100644 doc/develop/init.rst

diff --git a/README b/README index 78d91a2f62d..54e723162fd 100644 --- a/README +++ b/README @@ -133,88 +133,6 @@ run some of U-Boot's tests.

See doc/arch/sandbox/sandbox.rst for more details.

- -Board Initialisation Flow: --------------------------- - -This is the intended start-up flow for boards. This should apply for both -SPL and U-Boot proper (i.e. they both follow the same rules). - -Note: "SPL" stands for "Secondary Program Loader," which is explained in -more detail later in this file. - -At present, SPL mostly uses a separate code path, but the function names -and roles of each function are the same. Some boards or architectures -may not conform to this. At least most ARM boards which use -CONFIG_SPL_FRAMEWORK conform to this. - -Execution typically starts with an architecture-specific (and possibly -CPU-specific) start.S file, such as: - - - arch/arm/cpu/armv7/start.S - - arch/powerpc/cpu/mpc83xx/start.S - - arch/mips/cpu/start.S - -and so on. From there, three functions are called; the purpose and -limitations of each of these functions are described below. - -lowlevel_init(): - - purpose: essential init to permit execution to reach board_init_f() - - no global_data or BSS - - there is no stack (ARMv7 may have one but it will soon be removed) - - must not set up SDRAM or use console - - must only do the bare minimum to allow execution to continue to - board_init_f() - - this is almost never needed - - return normally from this function - -board_init_f(): - - purpose: set up the machine ready for running board_init_r(): - i.e. SDRAM and serial UART - - global_data is available - - stack is in SRAM - - BSS is not available, so you cannot use global/static variables, - only stack variables and global_data - - Non-SPL-specific notes: - - dram_init() is called to set up DRAM. If already done in SPL this - can do nothing - - SPL-specific notes: - - you can override the entire board_init_f() function with your own - version as needed. - - preloader_console_init() can be called here in extremis - - should set up SDRAM, and anything needed to make the UART work - - there is no need to clear BSS, it will be done by crt0.S - - for specific scenarios on certain architectures an early BSS *can* - be made available (via CONFIG_SPL_EARLY_BSS by moving the clearing - of BSS prior to entering board_init_f()) but doing so is discouraged. - Instead it is strongly recommended to architect any code changes - or additions such to not depend on the availability of BSS during - board_init_f() as indicated in other sections of this README to - maintain compatibility and consistency across the entire code base. - - must return normally from this function (don't call board_init_r() - directly) - -Here the BSS is cleared. For SPL, if CONFIG_SPL_STACK_R is defined, then at -this point the stack and global_data are relocated to below -CONFIG_SPL_STACK_R_ADDR. For non-SPL, U-Boot is relocated to run at the top of -memory. - -board_init_r(): - - purpose: main execution, common code - - global_data is available - - SDRAM is available - - BSS is available, all static/global variables can be used - - execution eventually continues to main_loop() - - Non-SPL-specific notes: - - U-Boot is relocated to the top of memory and is now running from - there. - - SPL-specific notes: - - stack is optionally in SDRAM, if CONFIG_SPL_STACK_R is defined - The following options need to be configured:

- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. diff --git a/doc/develop/index.rst b/doc/develop/index.rst index 0d0e60ab56c..da9643dca14 100644 --- a/doc/develop/index.rst +++ b/doc/develop/index.rst @@ -38,6 +38,7 @@ Implementation distro driver-model/index environment + init expo cedit event diff --git a/doc/develop/init.rst b/doc/develop/init.rst new file mode 100644 index 00000000000..2955d9bdbc3 --- /dev/null +++ b/doc/develop/init.rst @@ -0,0 +1,92 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Board Initialisation Flow +------------------------- + +This is the intended start-up flow for boards. This should apply for both +SPL and U-Boot proper (i.e. they both follow the same rules). + +Note: "SPL" stands for "Secondary Program Loader," which is explained in +more detail later in this file. + +At present, SPL mostly uses a separate code path, but the function names +and roles of each function are the same. Some boards or architectures +may not conform to this. At least most ARM boards which use +CONFIG_SPL_FRAMEWORK conform to this. + +Execution typically starts with an architecture-specific (and possibly +CPU-specific) start.S file, such as: + +- arch/arm/cpu/armv7/start.S +- arch/powerpc/cpu/mpc83xx/start.S +- arch/mips/cpu/start.S + +and so on. From there, three functions are called; the purpose and +limitations of each of these functions are described below. + +lowlevel_init() +~~~~~~~~~~~~~~~ + +- purpose: essential init to permit execution to reach board_init_f() +- no global_data or BSS +- there is no stack (ARMv7 may have one but it will soon be removed) +- must not set up SDRAM or use console +- must only do the bare minimum to allow execution to continue to + board_init_f() +- this is almost never needed +- return normally from this function + +board_init_f() +~~~~~~~~~~~~~~ + +- purpose: set up the machine ready for running board_init_r(): + i.e. SDRAM and serial UART +- global_data is available +- stack is in SRAM +- BSS is not available, so you cannot use global/static variables, + only stack variables and global_data + +Non-xPL-specific notes: + + - dram_init() is called to set up DRAM. If already done in SPL this + can do nothing + +xPL-specific notes: + + - you can override the entire board_init_f() function with your own + version as needed. + - preloader_console_init() can be called here in extremis + - should set up SDRAM, and anything needed to make the UART work + - there is no need to clear BSS, it will be done by crt0.S + - for specific scenarios on certain architectures an early BSS *can* + be made available (via CONFIG_SPL_EARLY_BSS by moving the clearing + of BSS prior to entering board_init_f()) but doing so is discouraged. + Instead it is strongly recommended to architect any code changes + or additions such to not depend on the availability of BSS during + board_init_f() as indicated in other sections of this README to + maintain compatibility and consistency across the entire code base. + - must return normally from this function (don't call board_init_r() + directly) + +Here the BSS is cleared. For SPL, if CONFIG_SPL_STACK_R is defined, then at +this point the stack and global_data are relocated to below +CONFIG_SPL_STACK_R_ADDR. For non-SPL, U-Boot is relocated to run at the top of +memory. + +board_init_r() +~~~~~~~~~~~~~~ + + - purpose: main execution, common code + - global_data is available + - SDRAM is available + - BSS is available, all static/global variables can be used + - execution eventually continues to main_loop() + +Non-SPL-specific notes: + + - U-Boot is relocated to the top of memory and is now running from + there. + +SPL-specific notes: + + - stack is optionally in SDRAM, if CONFIG_SPL_STACK_R is defined

Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: - Split into several patches - Squash in 'x86: Update a comment to mention XPL'

arch/arm/Makefile | 6 +++--- arch/arm/config.mk | 6 +++--- arch/arm/cpu/arm11/Makefile | 2 +- arch/arm/cpu/arm1176/start.S | 2 +- arch/arm/cpu/arm926ejs/Makefile | 2 +- arch/arm/cpu/arm926ejs/mxs/Makefile | 4 ++-- arch/arm/cpu/arm926ejs/sunxi/config.mk | 2 +- arch/arm/cpu/armv7/Makefile | 2 +- arch/arm/cpu/armv7/cpu.c | 2 +- arch/arm/cpu/armv7/lowlevel_init.S | 4 ++-- arch/arm/cpu/armv7/s5p-common/Makefile | 2 +- arch/arm/cpu/armv7/start.S | 2 +- arch/arm/cpu/armv7/sunxi/Makefile | 4 ++-- arch/arm/cpu/armv8/Makefile | 6 +++--- arch/arm/cpu/armv8/cache_v8.c | 2 +- arch/arm/cpu/armv8/fsl-layerscape/Makefile | 2 +- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 14 +++++++------- .../cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 2 +- .../armv8/fsl-layerscape/fsl_lsch3_serdes.c | 6 +++--- arch/arm/cpu/armv8/fsl-layerscape/icid.c | 6 +++--- arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 6 +++--- arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c | 2 +- arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c | 2 +- arch/arm/cpu/armv8/fsl-layerscape/spl.c | 4 ++-- arch/arm/cpu/armv8/start.S | 8 ++++---- arch/arm/dts/imx8qm-u-boot.dtsi | 2 +- arch/arm/dts/imx8qxp-u-boot.dtsi | 2 +- .../include/asm/arch-fsl-layerscape/fsl_icid.h | 6 +++--- arch/arm/include/asm/arch-imx8/boot0.h | 2 +- arch/arm/include/asm/arch-lpc32xx/sys_proto.h | 2 +- arch/arm/include/asm/arch-mx6/litesom.h | 2 +- arch/arm/include/asm/arch-mx6/mx6-ddr.h | 4 ++-- arch/arm/include/asm/arch-mxs/sys_proto.h | 2 +- arch/arm/include/asm/arch-rk3066/boot0.h | 4 ++-- arch/arm/include/asm/arch-rockchip/boot0.h | 6 +++--- .../arm/include/asm/arch-rockchip/cru_rv1126.h | 10 +++++----- arch/arm/include/asm/arch-sunxi/boot0.h | 4 ++-- arch/arm/include/asm/arch-sunxi/sys_proto.h | 2 +- arch/arm/include/asm/fsl_secure_boot.h | 4 ++-- arch/arm/include/asm/ti-common/sys_proto.h | 2 +- arch/arm/lib/Makefile | 2 +- arch/arm/lib/crt0.S | 14 +++++++------- arch/arm/lib/crt0_64.S | 10 +++++----- arch/arm/lib/eabi_compat.c | 2 +- arch/arm/lib/stack.c | 2 +- arch/arm/lib/vectors.S | 6 +++--- arch/arm/lib/zimage.c | 4 ++-- arch/arm/mach-aspeed/ast2600/Makefile | 2 +- arch/arm/mach-aspeed/ast2600/lowlevel_init.S | 2 +- arch/arm/mach-at91/Makefile | 2 +- arch/arm/mach-at91/config.mk | 2 +- arch/arm/mach-davinci/Makefile | 2 +- arch/arm/mach-davinci/config.mk | 2 +- arch/arm/mach-davinci/misc.c | 2 +- arch/arm/mach-exynos/Makefile | 2 +- arch/arm/mach-exynos/lowlevel_init.c | 4 ++-- arch/arm/mach-exynos/pinmux.c | 2 +- arch/arm/mach-imx/Makefile | 18 +++++++++--------- arch/arm/mach-imx/cpu.c | 6 +++--- arch/arm/mach-imx/hab.c | 8 ++++---- arch/arm/mach-imx/imx8/cpu.c | 4 ++-- arch/arm/mach-imx/imx8m/clock_imx8mm.c | 2 +- arch/arm/mach-imx/imx8m/clock_imx8mq.c | 4 ++-- arch/arm/mach-imx/imx8m/soc.c | 16 ++++++++-------- arch/arm/mach-imx/imx8ulp/Makefile | 2 +- arch/arm/mach-imx/imx8ulp/clock.c | 2 +- arch/arm/mach-imx/imx8ulp/lowlevel_init.S | 2 +- arch/arm/mach-imx/imx8ulp/soc.c | 12 ++++++------ arch/arm/mach-imx/imx9/Makefile | 2 +- arch/arm/mach-imx/imx9/clock.c | 4 ++-- arch/arm/mach-imx/imx9/lowlevel_init.S | 2 +- arch/arm/mach-imx/imx9/soc.c | 12 ++++++------ arch/arm/mach-imx/mx5/clock.c | 2 +- arch/arm/mach-imx/mx6/Makefile | 2 +- arch/arm/mach-imx/mx6/clock.c | 2 +- arch/arm/mach-imx/mx6/litesom.c | 2 +- arch/arm/mach-imx/mx6/opos6ul.c | 4 ++-- arch/arm/mach-imx/mx6/soc.c | 6 +++--- arch/arm/mach-imx/mx7/clock.c | 2 +- arch/arm/mach-imx/mx7/soc.c | 4 ++-- arch/arm/mach-imx/mx7ulp/clock.c | 2 +- arch/arm/mach-imx/mx7ulp/soc.c | 2 +- arch/arm/mach-imx/syscounter.c | 2 +- arch/arm/mach-k3/am62ax/Makefile | 2 +- arch/arm/mach-k3/am62px/Makefile | 2 +- arch/arm/mach-k3/am62x/Makefile | 2 +- arch/arm/mach-k3/am64x/Makefile | 2 +- arch/arm/mach-k3/am65x/Makefile | 2 +- arch/arm/mach-k3/arm64/cache.S | 2 +- arch/arm/mach-k3/j721e/Makefile | 2 +- arch/arm/mach-k3/j721s2/Makefile | 2 +- arch/arm/mach-k3/j721s2/j721s2_init.c | 2 +- arch/arm/mach-k3/j722s/Makefile | 2 +- arch/arm/mach-k3/j784s4/Makefile | 2 +- arch/arm/mach-k3/r5/Makefile | 2 +- arch/arm/mach-k3/security.c | 2 +- arch/arm/mach-keystone/Makefile | 2 +- arch/arm/mach-keystone/config.mk | 4 ++-- arch/arm/mach-keystone/mon.c | 2 +- arch/arm/mach-lpc32xx/Makefile | 2 +- arch/arm/mach-mediatek/Makefile | 2 +- arch/arm/mach-mediatek/mt7629/lowlevel_init.S | 2 +- arch/arm/mach-mvebu/Makefile | 8 ++++---- arch/arm/mach-mvebu/cpu.c | 4 ++-- arch/arm/mach-mvebu/include/mach/cpu.h | 8 ++++---- arch/arm/mach-mvebu/include/mach/soc.h | 2 +- arch/arm/mach-mvebu/serdes/a38x/Makefile | 8 ++++---- arch/arm/mach-mvebu/serdes/axp/Makefile | 4 ++-- arch/arm/mach-nexell/include/mach/display.h | 2 +- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/am33xx/board.c | 18 +++++++++--------- arch/arm/mach-omap2/boot-common.c | 6 +++--- arch/arm/mach-omap2/clocks-common.c | 2 +- arch/arm/mach-omap2/config.mk | 2 +- arch/arm/mach-omap2/config_secure.mk | 2 +- arch/arm/mach-omap2/hwinit-common.c | 14 +++++++------- arch/arm/mach-omap2/omap3/Makefile | 2 +- arch/arm/mach-omap2/omap3/board.c | 6 +++--- arch/arm/mach-omap2/omap3/sdrc.c | 4 ++-- arch/arm/mach-omap2/omap5/hwinit.c | 2 +- arch/arm/mach-omap2/sec-common.c | 2 +- arch/arm/mach-orion5x/cpu.c | 2 +- arch/arm/mach-orion5x/lowlevel_init.S | 4 ++-- arch/arm/mach-renesas/include/mach/boot0.h | 2 +- arch/arm/mach-renesas/lowlevel_init_ca15.S | 2 +- arch/arm/mach-rockchip/Makefile | 4 ++-- arch/arm/mach-rockchip/px30/px30.c | 2 +- arch/arm/mach-rockchip/rk3036/Makefile | 2 +- arch/arm/mach-rockchip/rk3066/rk3066.c | 2 +- arch/arm/mach-rockchip/rk3188/rk3188.c | 4 ++-- arch/arm/mach-rockchip/rk322x/rk322x.c | 2 +- arch/arm/mach-rockchip/rk3288/rk3288.c | 4 ++-- arch/arm/mach-rockchip/rk3308/rk3308.c | 2 +- arch/arm/mach-rockchip/rk3328/rk3328.c | 2 +- arch/arm/mach-rockchip/rk3368/rk3368.c | 2 +- arch/arm/mach-rockchip/rk3399/rk3399.c | 8 ++++---- arch/arm/mach-rockchip/rk3568/rk3568.c | 2 +- arch/arm/mach-rockchip/rk3588/rk3588.c | 4 ++-- arch/arm/mach-rockchip/rv1108/Makefile | 2 +- arch/arm/mach-rockchip/rv1126/rv1126.c | 2 +- arch/arm/mach-sc5xx/Makefile | 2 +- arch/arm/mach-sc5xx/config.mk | 2 +- arch/arm/mach-socfpga/Makefile | 2 +- arch/arm/mach-socfpga/board.c | 6 +++--- arch/arm/mach-socfpga/clock_manager.c | 2 +- arch/arm/mach-socfpga/clock_manager_arria10.c | 2 +- arch/arm/mach-socfpga/include/mach/boot0.h | 2 +- .../include/mach/clock_manager_arria10.h | 2 +- arch/arm/mach-socfpga/lowlevel_init_soc64.S | 2 +- arch/arm/mach-socfpga/mailbox_s10.c | 2 +- arch/arm/mach-socfpga/misc.c | 2 +- arch/arm/mach-socfpga/misc_arria10.c | 2 +- arch/arm/mach-socfpga/misc_gen5.c | 2 +- arch/arm/mach-socfpga/reset_manager_s10.c | 2 +- arch/arm/mach-socfpga/secure_vab.c | 2 +- arch/arm/mach-socfpga/timer_s10.c | 4 ++-- arch/arm/mach-socfpga/wrap_pll_config_soc64.c | 6 +++--- arch/arm/mach-stm32mp/Makefile | 2 +- arch/arm/mach-stm32mp/bsec.c | 12 ++++++------ arch/arm/mach-stm32mp/stm32mp1/Makefile | 2 +- arch/arm/mach-stm32mp/stm32mp1/cpu.c | 6 +++--- arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c | 4 ++-- arch/arm/mach-sunxi/Makefile | 2 +- arch/arm/mach-sunxi/board.c | 10 +++++----- arch/arm/mach-sunxi/clock_sun4i.c | 4 ++-- arch/arm/mach-sunxi/clock_sun50i_h6.c | 4 ++-- arch/arm/mach-sunxi/clock_sun6i.c | 4 ++-- arch/arm/mach-sunxi/clock_sun8i_a83t.c | 4 ++-- arch/arm/mach-sunxi/clock_sun9i.c | 4 ++-- arch/arm/mach-sunxi/gtbus_sun9i.c | 2 +- arch/arm/mach-tegra/Makefile | 4 ++-- arch/arm/mach-tegra/board.c | 2 +- arch/arm/mach-tegra/board2.c | 2 +- arch/arm/mach-tegra/tegra114/Makefile | 2 +- arch/arm/mach-tegra/tegra124/Makefile | 4 ++-- arch/arm/mach-tegra/tegra20/Makefile | 2 +- arch/arm/mach-tegra/tegra30/Makefile | 2 +- arch/arm/mach-uniphier/Makefile | 2 +- arch/arm/mach-uniphier/arm32/Makefile | 2 +- .../mach-uniphier/boot-device/boot-device.c | 4 ++-- arch/arm/mach-uniphier/clk/Makefile | 2 +- arch/arm/mach-uniphier/debug-uart/Makefile | 2 +- arch/arm/mach-uniphier/debug-uart/debug-uart.c | 4 ++-- arch/arm/mach-uniphier/dram/Makefile | 2 +- arch/arm/mach-zynq/Makefile | 2 +- arch/arm/mach-zynq/cpu.c | 2 +- arch/arm/mach-zynqmp/Makefile | 6 +++--- arch/arm/mach-zynqmp/cpu.c | 4 ++-- arch/microblaze/config.mk | 2 +- arch/microblaze/cpu/Makefile | 2 +- arch/microblaze/cpu/start.S | 8 ++++---- arch/mips/Makefile | 2 +- arch/mips/config.mk | 2 +- arch/mips/lib/Makefile | 2 +- arch/mips/mach-jz47xx/Makefile | 2 +- arch/mips/mach-jz47xx/include/mach/jz4780.h | 2 +- arch/mips/mach-jz47xx/jz4780/jz4780.c | 4 ++-- arch/mips/mach-jz47xx/start.S | 4 ++-- arch/mips/mach-mtmips/Makefile | 2 +- arch/mips/mach-mtmips/cpu.c | 2 +- arch/mips/mach-mtmips/mt7620/Makefile | 2 +- arch/mips/mach-mtmips/mt7621/Makefile | 2 +- arch/mips/mach-mtmips/mt7628/Makefile | 2 +- arch/powerpc/config.mk | 2 +- arch/powerpc/cpu/mpc83xx/Makefile | 2 +- arch/powerpc/cpu/mpc83xx/start.S | 6 +++--- arch/powerpc/cpu/mpc85xx/Makefile | 4 ++-- arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 2 +- arch/powerpc/cpu/mpc85xx/start.S | 14 +++++++------- arch/powerpc/cpu/mpc85xx/tlb.c | 4 ++-- arch/powerpc/cpu/mpc8xxx/Makefile | 2 +- arch/powerpc/cpu/mpc8xxx/fsl_pamu.c | 4 ++-- arch/powerpc/cpu/mpc8xxx/law.c | 4 ++-- arch/powerpc/cpu/mpc8xxx/pamu_table.c | 2 +- arch/powerpc/include/asm/fsl_secure_boot.h | 8 ++++---- arch/powerpc/lib/Makefile | 4 ++-- arch/riscv/cpu/fu540/Makefile | 2 +- arch/riscv/cpu/fu740/Makefile | 2 +- arch/riscv/cpu/jh7110/Makefile | 2 +- arch/riscv/cpu/start.S | 8 ++++---- arch/riscv/lib/Makefile | 2 +- arch/riscv/lib/sifive_cache.c | 4 ++-- arch/sandbox/cpu/Makefile | 2 +- arch/sandbox/cpu/cpu.c | 2 +- arch/sandbox/cpu/start.c | 2 +- arch/x86/Makefile | 2 +- arch/x86/config.mk | 8 ++++---- arch/x86/cpu/Makefile | 2 +- arch/x86/cpu/apollolake/Makefile | 10 +++++----- arch/x86/cpu/apollolake/fsp_bindings.c | 4 ++-- arch/x86/cpu/broadwell/Makefile | 4 ++-- arch/x86/cpu/broadwell/cpu_full.c | 2 +- arch/x86/cpu/broadwell/pch.c | 2 +- arch/x86/cpu/config.mk | 2 +- arch/x86/cpu/coreboot/Makefile | 2 +- arch/x86/cpu/coreboot/coreboot.c | 2 +- arch/x86/cpu/cpu.c | 4 ++-- arch/x86/cpu/intel_common/Makefile | 6 +++--- arch/x86/cpu/ivybridge/Makefile | 2 +- arch/x86/include/asm/string.h | 2 +- arch/x86/lib/Makefile | 10 +++++----- arch/x86/lib/fsp/Makefile | 2 +- 242 files changed, 439 insertions(+), 439 deletions(-)

diff --git a/arch/arm/Makefile b/arch/arm/Makefile index dbeedbe544b..cb87a684754 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+

-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_ARCH_TEGRA),yy) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_ARCH_TEGRA),yy) CONFIG_CPU_V7A= CONFIG_CPU_ARM720T=y endif @@ -24,7 +24,7 @@ endif

# On Tegra systems we must build SPL for the armv4 core on the device # but otherwise we can use the value in CONFIG_SYS_ARM_ARCH -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_ARCH_TEGRA),yy) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_ARCH_TEGRA),yy) arch-y += -D__LINUX_ARM_ARCH__=4 else arch-y += -D__LINUX_ARM_ARCH__=$(CONFIG_SYS_ARM_ARCH) @@ -106,7 +106,7 @@ libs-y += $(machdirs)

head-y := arch/arm/cpu/$(CPU)/start.o

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) ifeq ($(CONFIG_SYS_SOC)$(CONFIG_SPL_FRAMEWORK),"mxs") head-y := arch/arm/cpu/arm926ejs/mxs/start.o endif diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 5530d02b66c..084fd399931 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -99,7 +99,7 @@ PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARM) $(PF_CPPFLAGS_ABI) ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS))) # This file is parsed many times, so the string may get added multiple # times. Also, the prefix needs to be different based on whether -# CONFIG_SPL_BUILD is defined or not. 'filter-out' the existing entry +# CONFIG_XPL_BUILD is defined or not. 'filter-out' the existing entry # before adding the correct one. PLATFORM_LIBS := arch/arm/lib/eabi_compat.o \ $(filter-out arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS)) @@ -126,7 +126,7 @@ PLATFORM_RELFLAGS += -fno-optimize-sibling-calls endif endif

-ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) # Check that only R_ARM_RELATIVE relocations are generated. INPUTS-y += checkarmreloc # The movt / movw can hardcode 16 bit parts of the addresses in the @@ -160,7 +160,7 @@ endif ifdef CONFIG_MACH_IMX ifneq ($(CONFIG_IMX_CONFIG),"") ifdef CONFIG_SPL -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD INPUTS-y += SPL endif else diff --git a/arch/arm/cpu/arm11/Makefile b/arch/arm/cpu/arm11/Makefile index 5dfa01ae8d0..38a3e4d95e2 100644 --- a/arch/arm/cpu/arm11/Makefile +++ b/arch/arm/cpu/arm11/Makefile @@ -5,6 +5,6 @@

obj-y = cpu.o

-ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_EFI_LOADER) += sctlr.o endif diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 78a9cc173a3..d3ab5928eee 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -65,7 +65,7 @@ cpu_init_crit: * When booting from NAND - it has definitely been a reset, so, no need * to flush caches and disable the MMU */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * flush v4 I/D caches */ diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile index 8cfe3f0fbbc..75513889c5d 100644 --- a/arch/arm/cpu/arm926ejs/Makefile +++ b/arch/arm/cpu/arm926ejs/Makefile @@ -6,7 +6,7 @@ extra-y = start.o obj-y = cpu.o cache.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_SPL_NO_CPU_SUPPORT extra-y := endif diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile index 1638ef8fd8d..f633e54ba62 100644 --- a/arch/arm/cpu/arm926ejs/mxs/Makefile +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile @@ -3,11 +3,11 @@ # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-extra-$(CONFIG_SPL_BUILD) := start.o +extra-$(CONFIG_XPL_BUILD) := start.o

obj-y = clock.o mxs.o iomux.o timer.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o endif

diff --git a/arch/arm/cpu/arm926ejs/sunxi/config.mk b/arch/arm/cpu/arm926ejs/sunxi/config.mk index 76ffec9df6a..50899d20316 100644 --- a/arch/arm/cpu/arm926ejs/sunxi/config.mk +++ b/arch/arm/cpu/arm926ejs/sunxi/config.mk @@ -1,6 +1,6 @@ # Build a combined spl + u-boot image ifdef CONFIG_SPL -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ALL-y += u-boot-sunxi-with-spl.bin endif endif diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 99cf9eb515f..0e7d769bd40 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -12,7 +12,7 @@ obj-y += syslib.o

obj-$(CONFIG_SYS_ARM_MPU) += mpu_v7r.o

-ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_EFI_LOADER) += sctlr.o obj-$(CONFIG_ARMV7_NONSEC) += exception_level.o endif diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c index aa981faef00..8082f369ed6 100644 --- a/arch/arm/cpu/armv7/cpu.c +++ b/arch/arm/cpu/armv7/cpu.c @@ -32,7 +32,7 @@ int cleanup_before_linux_select(int flags) * * we turn off caches etc ... */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD disable_interrupts(); #endif

diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S index 3c8c07fe016..a6c844b7e3d 100644 --- a/arch/arm/cpu/armv7/lowlevel_init.S +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -26,7 +26,7 @@ WEAK(lowlevel_init) /* * Setup a temporary stack. Global data is not available yet. */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK) ldr sp, =CONFIG_SPL_STACK #else ldr sp, =SYS_INIT_SP_ADDR @@ -39,7 +39,7 @@ WEAK(lowlevel_init) * Set up global data for boards that still need it. This will be * removed soon. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD ldr r9, =gdata #else sub sp, sp, #GD_SIZE diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile index 0985420fe5c..4660ff0057e 100644 --- a/arch/arm/cpu/armv7/s5p-common/Makefile +++ b/arch/arm/cpu/armv7/s5p-common/Makefile @@ -8,7 +8,7 @@ ifdef CONFIG_ARCH_NEXELL obj-$(CONFIG_S5P4418_ONEWIRE) += pwm.o else obj-y += cpu_info.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += timer.o obj-y += sromc.o endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 7730a16e512..b63481b43ca 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -279,7 +279,7 @@ ENTRY(cpu_init_cp15) orr r2, r4, r2 @ r2 has combined CPU variant + revision

/* Early stack for ERRATA that needs into call C code */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK) ldr r0, =(CONFIG_SPL_STACK) #else ldr r0, =(SYS_INIT_SP_ADDR) diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 3e975b366c4..0624e93efde 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -12,10 +12,10 @@ obj-$(CONFIG_MACH_SUN8I_H3) += tzpc.o obj-$(CONFIG_MACH_SUN6I) += sram.o obj-$(CONFIG_MACH_SUN8I) += sram.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ARMV7_PSCI) += psci.o endif

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += fel_utils.o endif diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index bba4f570dbb..722ec89d239 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -13,7 +13,7 @@ ifndef CONFIG_$(SPL_)SYS_DCACHE_OFF obj-y += cache_v8.o obj-y += cache.o endif -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) += exceptions.o else obj-y += exceptions.o @@ -27,14 +27,14 @@ endif obj-y += cpu-dt.o obj-$(CONFIG_ARM_SMCCC) += smccc-call.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ARMV8_SPIN_TABLE) += spin_table.o spin_table_v8.o else obj-$(CONFIG_ARCH_SUNXI) += fel_utils.o endif obj-$(CONFIG_$(SPL_)ARMV8_SEC_FIRMWARE_SUPPORT) += sec_firmware.o sec_firmware_asm.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_RECOVER_DATA_SECTION) += spl_data.o endif

diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c index 631d9efa5e1..e6be6359c5d 100644 --- a/arch/arm/cpu/armv8/cache_v8.c +++ b/arch/arm/cpu/armv8/cache_v8.c @@ -1016,7 +1016,7 @@ void mmu_change_region_attr(phys_addr_t addr, size_t siz, u64 attrs) * running however really wants to have dcache and the MMU active. Check that * everything is sane and give the developer a hint if it isn't. */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #error Please describe your MMU layout in CONFIG_SYS_MEM_MAP and enable dcache. #endif

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index eefdf12369c..e2033dc5aff 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -5,7 +5,7 @@ obj-y += cpu.o obj-y += lowlevel.o obj-y += soc.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_MP) += mp.o spintable.o obj-$(CONFIG_OF_LIBFDT) += fdt.o endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index d2dbfdd08a0..f9c2083677a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -122,7 +122,7 @@ static struct mm_region early_map[] = { { CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_SIZE1, #if defined(CONFIG_TFABOOT) || \ - (defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD)) PTE_BLOCK_MEMTYPE(MT_NORMAL) | #else /* Start with nGnRnE and PXN and UXN to prevent speculative access */ PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN | @@ -181,7 +181,7 @@ static struct mm_region early_map[] = { { CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_SIZE1, #if defined(CONFIG_TFABOOT) || \ - (defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD)) PTE_BLOCK_MEMTYPE(MT_NORMAL) | #else /* Start with nGnRnE and PXN and UXN to prevent speculative access */ PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN | @@ -1055,7 +1055,7 @@ int cpu_eth_init(struct bd_info *bis) { int error = 0;

-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) error = fsl_mc_ldpaa_init(bis); #endif return error; @@ -1285,7 +1285,7 @@ phys_size_t board_reserve_ram_top(phys_size_t ram_size) { phys_size_t ram_top = ram_size;

-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) ram_top = mc_get_dram_block_size(); if (ram_top > ram_size) return ram_size + ram_top; @@ -1381,7 +1381,7 @@ static int tfa_dram_init_banksize(void) if (i > 0) ret = 0;

-#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_XPL_BUILD) /* Assign memory for MC */ #ifdef CONFIG_SYS_DDR_BLOCK3_BASE if (gd->bd->bi_dram[2].size >= @@ -1467,7 +1467,7 @@ int dram_init_banksize(void) } #endif /* CFG_SYS_MEM_RESERVE_SECURE */

-#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_XPL_BUILD) /* Assign memory for MC */ #ifdef CONFIG_SYS_DDR_BLOCK3_BASE if (gd->bd->bi_dram[2].size >= @@ -1624,7 +1624,7 @@ __weak int dram_init(void) #ifdef CONFIG_SYS_FSL_DDR fsl_initdram(); #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \ - defined(CONFIG_SPL_BUILD) + defined(CONFIG_XPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); #endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c index 9a24d4b3031..1f03f5e2ecd 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c @@ -93,7 +93,7 @@ void get_sys_info(struct sys_info *sys_info)

#define HWA_CGA_M1_CLK_SEL 0xe0000000 #define HWA_CGA_M1_CLK_SHIFT 29 -#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_XPL_BUILD) rcw_tmp = in_be32(&gur->rcwsr[7]); switch ((rcw_tmp & HWA_CGA_M1_CLK_SEL) >> HWA_CGA_M1_CLK_SHIFT) { case 2: diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index b768790437f..b5213c780fb 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -25,7 +25,7 @@ static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT]; static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT]; #endif

-#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) #if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) int xfi_dpmac[XFI14 + 1]; int sgmii_dpmac[SGMII18 + 1]; @@ -162,7 +162,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask, debug("Unknown SerDes lane protocol %d\n", lane_prtcl); else { serdes_prtcl_map[lane_prtcl] = 1; -#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) #if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) if (lane_prtcl >= XFI1 && lane_prtcl <= XFI14) wriop_init_dpmac(sd, xfi_dpmac[lane_prtcl], @@ -553,7 +553,7 @@ int setup_serdes_volt(u32 svdd)

void fsl_serdes_init(void) { -#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_XPL_BUILD) int i , j;

#if defined(CONFIG_ARCH_LX2160A) || defined(CONFIG_ARCH_LX2162A) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/icid.c b/arch/arm/cpu/armv8/fsl-layerscape/icid.c index 04ffefafbf7..aa0af077d2f 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/icid.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/icid.c @@ -23,7 +23,7 @@ static void set_icid(struct icid_id_table *tbl, int size) out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg); }

-#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_XPL_BUILD) static void set_fman_icids(struct fman_icid_id_table *tbl, int size) { int i; @@ -41,12 +41,12 @@ void set_icids(void) /* setup general icid offsets */ set_icid(icid_tbl, icid_tbl_sz);

-#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_XPL_BUILD) set_fman_icids(fman_icid_tbl, fman_icid_tbl_sz); #endif }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids) { int i, ret; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S index 4358c6ed11c..75c204e8309 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S @@ -183,7 +183,7 @@ ENTRY(lowlevel_init) #endif

/* Initialize GIC Secure Bank Status */ -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) #if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) branch_if_slave x0, 1f bl get_gic_offset @@ -306,7 +306,7 @@ ENTRY(lowlevel_init) #endif

#if !defined(CONFIG_TFABOOT) && \ - (defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_XPL_BUILD)) bl fsl_ocram_init #endif

@@ -314,7 +314,7 @@ ENTRY(lowlevel_init) ret ENDPROC(lowlevel_init)

-#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_FSL_LSCH2) && !defined(CONFIG_XPL_BUILD) ENTRY(fsl_ocram_init) mov x28, lr /* Save LR */ bl fsl_clear_ocram diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c index ec80e42055d..48b95627bae 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c @@ -60,7 +60,7 @@ struct icid_id_table icid_tbl[] = {

int icid_tbl_sz = ARRAY_SIZE(icid_tbl);

-#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_XPL_BUILD) struct fman_icid_id_table fman_icid_tbl[] = { /* port id, icid */ SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END), diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c index a73dd316f8d..ab175b60c6c 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c @@ -59,7 +59,7 @@ struct icid_id_table icid_tbl[] = {

int icid_tbl_sz = ARRAY_SIZE(icid_tbl);

-#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_XPL_BUILD) struct fman_icid_id_table fman_icid_tbl[] = { /* port id, icid */ SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END), diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index a739ff2da58..1f1e3d4a97b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -41,7 +41,7 @@ u32 spl_boot_device(void) return 0; }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

void spl_board_init(void) { @@ -136,4 +136,4 @@ int spl_start_uboot(void) return 1; } #endif /* CONFIG_SPL_OS_BOOT */ -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index 74612802617..4a3b9f60e46 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -58,7 +58,7 @@ reset: .globl save_boot_params_ret save_boot_params_ret:

-#if CONFIG_POSITION_INDEPENDENT && !defined(CONFIG_SPL_BUILD) +#if CONFIG_POSITION_INDEPENDENT && !defined(CONFIG_XPL_BUILD) /* Verify that we're 4K aligned. */ adr x0, _start ands x0, x0, #0xfff @@ -104,7 +104,7 @@ pie_skip_reloc: pie_fixup_done: #endif

-#if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_XPL_BUILD) .macro set_vbar, regname, reg msr \regname, \reg .endm @@ -174,7 +174,7 @@ pie_fixup_done: /* Processor specific initialization */ bl lowlevel_init

-#if defined(CONFIG_ARMV8_SPIN_TABLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_ARMV8_SPIN_TABLE) && !defined(CONFIG_XPL_BUILD) branch_if_master x0, master_cpu b spin_table_secondary_jump /* never return */ @@ -354,7 +354,7 @@ ENDPROC(smp_kick_all_cpus) /*-----------------------------------------------------------------------*/

ENTRY(c_runtime_cpu_setup) -#if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) || !defined(CONFIG_XPL_BUILD) /* Relocate vBAR */ adr x0, vectors switch_el x1, 3f, 2f, 1f diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi index d316e869516..af229501a4d 100644 --- a/arch/arm/dts/imx8qm-u-boot.dtsi +++ b/arch/arm/dts/imx8qm-u-boot.dtsi @@ -10,7 +10,7 @@ };

&binman { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD u-boot-spl-ddr { align = <4>; align-size = <4>; diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi index 7622c40906f..62791c34c77 100644 --- a/arch/arm/dts/imx8qxp-u-boot.dtsi +++ b/arch/arm/dts/imx8qxp-u-boot.dtsi @@ -10,7 +10,7 @@ };

&binman { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD u-boot-spl-ddr { align = <4>; align-size = <4>; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h index d5f63f4a7ed..22671d4bbfd 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h @@ -12,13 +12,13 @@ #include <asm/armv8/sec_firmware.h>

struct icid_id_table { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD const char *compat; phys_addr_t compat_addr; #endif phys_addr_t reg_addr; u32 reg; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD u32 id; #endif bool le; @@ -35,7 +35,7 @@ int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids); void set_icids(void); void fdt_fixup_icid(void *blob);

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SET_ICID_ENTRY(name, idA, regA, addr, compataddr, _le) \ { .reg = regA, \ .reg_addr = addr, \ diff --git a/arch/arm/include/asm/arch-imx8/boot0.h b/arch/arm/include/asm/arch-imx8/boot0.h index 5ce781adb75..fc580b20a46 100644 --- a/arch/arm/include/asm/arch-imx8/boot0.h +++ b/arch/arm/include/asm/arch-imx8/boot0.h @@ -3,7 +3,7 @@ * Copyright 2019 NXP */

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) /* * We use absolute address not PC relative address to jump. * When running SPL on iMX8, the A core starts at address 0, a alias to OCRAM 0x100000, diff --git a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h index 4675dc3c533..b499d975526 100644 --- a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h +++ b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h @@ -16,7 +16,7 @@ void lpc32xx_slc_nand_init(void); void lpc32xx_i2c_init(unsigned int devnum); void lpc32xx_ssp_init(void); void lpc32xx_usb_init(void); -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) void ddr_init(const struct emc_dram_settings *dram); #endif #endif /* _LPC32XX_SYS_PROTO_H */ diff --git a/arch/arm/include/asm/arch-mx6/litesom.h b/arch/arm/include/asm/arch-mx6/litesom.h index 37a16d2c309..642ed22bffc 100644 --- a/arch/arm/include/asm/arch-mx6/litesom.h +++ b/arch/arm/include/asm/arch-mx6/litesom.h @@ -8,7 +8,7 @@

int litesom_mmc_init(struct bd_info *bis);

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void litesom_init_f(void); #endif

diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h index dbc97b25df8..ad9c1ac906a 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -5,7 +5,7 @@ #ifndef __ASM_ARCH_MX6_DDR_H__ #define __ASM_ARCH_MX6_DDR_H__

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #ifdef CONFIG_MX6Q #include "mx6q-ddr.h" #else @@ -488,7 +488,7 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *, const struct mx6_mmdc_calibration *, const void *);

-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

#define MX6_MMDC_P0_MDCTL 0x021b0000 #define MX6_MMDC_P0_MDPDC 0x021b0004 diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h index 17afd1b29e4..f8a56495acd 100644 --- a/arch/arm/include/asm/arch-mxs/sys_proto.h +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h @@ -14,7 +14,7 @@ int mxsmmc_initialize(struct bd_info *bis, int id, int (*wp)(int), int (*cd)(int));

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

#if defined(CONFIG_MX23) #include <asm/arch/iomux-mx23.h> diff --git a/arch/arm/include/asm/arch-rk3066/boot0.h b/arch/arm/include/asm/arch-rk3066/boot0.h index 6bf3828c84e..eaf81554f5b 100644 --- a/arch/arm/include/asm/arch-rk3066/boot0.h +++ b/arch/arm/include/asm/arch-rk3066/boot0.h @@ -10,7 +10,7 @@ * (containing the magic 'RK30'). This magic constant will be written into * the final image by the rkimage tool, but we need to reserve space for it here. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD b 1f /* if overwritten, entry-address is at the next word */ 1: #endif @@ -68,7 +68,7 @@ back_to_bootrom: pop {r1-r12, pc} #endif

-#if (defined(CONFIG_SPL_BUILD)) +#if (defined(CONFIG_XPL_BUILD)) /* U-Boot proper of armv7 does not need this */ b reset #endif diff --git a/arch/arm/include/asm/arch-rockchip/boot0.h b/arch/arm/include/asm/arch-rockchip/boot0.h index 0c375e543a5..edb2a31c348 100644 --- a/arch/arm/include/asm/arch-rockchip/boot0.h +++ b/arch/arm/include/asm/arch-rockchip/boot0.h @@ -12,7 +12,7 @@ * To make life easier for everyone, we build the SPL binary with * space for this 4-byte header already included in the binary. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * We need to add 4 bytes of space for the 'RK33' at the * beginning of the executable. However, as we want to keep @@ -39,7 +39,7 @@ entry_counter: .word 0 #endif

-#if (defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARM64)) +#if (defined(CONFIG_XPL_BUILD) || defined(CONFIG_ARM64)) /* U-Boot proper of armv7 do not need this */ b reset #endif @@ -54,7 +54,7 @@ _start: ARM_VECTORS #endif

-#if !defined(CONFIG_TPL_BUILD) && defined(CONFIG_SPL_BUILD) && \ +#if !defined(CONFIG_TPL_BUILD) && defined(CONFIG_XPL_BUILD) && \ (CONFIG_ROCKCHIP_SPL_RESERVE_IRAM > 0) .space CONFIG_ROCKCHIP_SPL_RESERVE_IRAM /* space for the ATF data */ #endif diff --git a/arch/arm/include/asm/arch-rockchip/cru_rv1126.h b/arch/arm/include/asm/arch-rockchip/cru_rv1126.h index 49a1f763795..ae273de3144 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rv1126.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rv1126.h @@ -11,7 +11,7 @@ #define KHz 1000 #define OSC_HZ (24 * MHz)

-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) #define APLL_HZ (1008 * MHz) #else #define APLL_HZ (816 * MHz) @@ -20,7 +20,7 @@ #define CPLL_HZ (500 * MHz) #define HPLL_HZ (1400 * MHz) #define PCLK_PDPMU_HZ (100 * MHz) -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) #define ACLK_PDBUS_HZ (396 * MHz) #else #define ACLK_PDBUS_HZ (500 * MHz) @@ -32,7 +32,7 @@ #define HCLK_PDCORE_HZ (200 * MHz) #define HCLK_PDAUDIO_HZ (150 * MHz) #define CLK_OSC0_DIV_HZ (32768) -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) #define ACLK_PDVI_HZ (297 * MHz) #define CLK_ISP_HZ (297 * MHz) #define ACLK_PDISPP_HZ (297 * MHz) @@ -324,7 +324,7 @@ enum { DCLK_VOP_DIV_SHIFT = 0, DCLK_VOP_DIV_MASK = 0xff,

-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) /* CRU_CLK_SEL49_CON */ ACLK_PDVI_SEL_SHIFT = 6, ACLK_PDVI_SEL_MASK = 0x3 << ACLK_PDVI_SEL_SHIFT, @@ -397,7 +397,7 @@ enum { CLK_GMAC_SRC_DIV_SHIFT = 0, CLK_GMAC_SRC_DIV_MASK = 0x1f << CLK_GMAC_SRC_DIV_SHIFT,

-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_KERNEL_BOOT) /* CRU_CLK_SEL68_CON */ ACLK_PDISPP_SEL_SHIFT = 6, ACLK_PDISPP_SEL_MASK = 0x3 << ACLK_PDISPP_SEL_SHIFT, diff --git a/arch/arm/include/asm/arch-sunxi/boot0.h b/arch/arm/include/asm/arch-sunxi/boot0.h index cad25c50bc6..6b2bb5a4586 100644 --- a/arch/arm/include/asm/arch-sunxi/boot0.h +++ b/arch/arm/include/asm/arch-sunxi/boot0.h @@ -5,7 +5,7 @@

#include <asm/arch/cpu.h>

-#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER) && !defined(CONFIG_XPL_BUILD) /* reserve space for BOOT0 header information */ b reset .space 1532 @@ -49,7 +49,7 @@ .word CONFIG_SUNXI_RVBAR_ADDRESS // writable RVBAR mapping addr .word SUNXI_SRAMC_BASE .word CONFIG_SUNXI_RVBAR_ALTERNATIVE // address for die variant -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .word CONFIG_SPL_TEXT_BASE #else .word CONFIG_TEXT_BASE diff --git a/arch/arm/include/asm/arch-sunxi/sys_proto.h b/arch/arm/include/asm/arch-sunxi/sys_proto.h index 064602292b6..92c7721a530 100644 --- a/arch/arm/include/asm/arch-sunxi/sys_proto.h +++ b/arch/arm/include/asm/arch-sunxi/sys_proto.h @@ -23,7 +23,7 @@ void sdelay(unsigned long); void return_to_fel(uint32_t lr, uint32_t sp);

/* Board / SoC level designware gmac init */ -#if !defined CONFIG_SPL_BUILD && defined CONFIG_SUN7I_GMAC +#if !defined CONFIG_XPL_BUILD && defined CONFIG_SUN7I_GMAC void eth_init_board(void); #else static inline void eth_init_board(void) {} diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index 15627c96e90..382a6d420a2 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -8,8 +8,8 @@ #define __FSL_SECURE_BOOT_H

#ifdef CONFIG_CHAIN_OF_TRUST -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD

-#endif /* #ifndef CONFIG_SPL_BUILD */ +#endif /* #ifndef CONFIG_XPL_BUILD */ #endif /* #ifdef CONFIG_CHAIN_OF_TRUST */ #endif diff --git a/arch/arm/include/asm/ti-common/sys_proto.h b/arch/arm/include/asm/ti-common/sys_proto.h index a96a8382fb6..514086a1bc4 100644 --- a/arch/arm/include/asm/ti-common/sys_proto.h +++ b/arch/arm/include/asm/ti-common/sys_proto.h @@ -57,7 +57,7 @@ static inline u8 uboot_loaded_by_spl(void) */ static inline u32 omap_hw_init_context(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD return OMAP_INIT_CONTEXT_SPL; #else if (uboot_loaded_by_spl()) diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 67275fba616..e343e81cf32 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -21,7 +21,7 @@ else obj-y += setjmp.o endif

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifdef CONFIG_ARM64 obj-y += relocate_64.o else diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index a0311438b45..3e4906e273d 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -102,7 +102,7 @@ ENTRY(_main)

#if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_NEEDS_SEPARATE_STACK) ldr r0, =(CONFIG_TPL_STACK) -#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#elif defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK) ldr r0, =(CONFIG_SPL_STACK) #else ldr r0, =(SYS_INIT_SP_ADDR) @@ -119,14 +119,14 @@ ENTRY(_main) bl debug_uart_init #endif

-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_EARLY_BSS) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_EARLY_BSS) CLEAR_BSS #endif

mov r0, #0 bl board_init_f

-#if ! defined(CONFIG_SPL_BUILD) +#if ! defined(CONFIG_XPL_BUILD)

/* * Set up intermediate environment (new sp and gd) and call @@ -171,13 +171,13 @@ here:

bl c_runtime_cpu_setup /* we still call old routine here */ #endif -#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK) +#if !defined(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK)

-#if !defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_EARLY_BSS) +#if !defined(CONFIG_XPL_BUILD) || !defined(CONFIG_SPL_EARLY_BSS) CLEAR_BSS #endif

-# ifdef CONFIG_SPL_BUILD +# ifdef CONFIG_XPL_BUILD /* Use a DRAM stack for the rest of SPL, if requested */ bl spl_relocate_stack_gd cmp r0, #0 @@ -185,7 +185,7 @@ here: movne r9, r0 # endif

-#if ! defined(CONFIG_SPL_BUILD) +#if ! defined(CONFIG_XPL_BUILD) bl coloured_LED_init bl red_led_on #endif diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S index dcc924dd2f4..32401f544a7 100644 --- a/arch/arm/lib/crt0_64.S +++ b/arch/arm/lib/crt0_64.S @@ -71,7 +71,7 @@ ENTRY(_main) */ #if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_NEEDS_SEPARATE_STACK) ldr x0, =(CONFIG_TPL_STACK) -#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#elif defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK) ldr x0, =(CONFIG_SPL_STACK) #elif defined(CONFIG_INIT_SP_RELATIVE) #if CONFIG_POSITION_INDEPENDENT @@ -99,7 +99,7 @@ ENTRY(_main) mov x0, #0 bl board_init_f

-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /* * Set up intermediate environment (new sp and gd) and call * relocate_code(addr_moni). Trick here is that we'll return @@ -139,9 +139,9 @@ relocation_return: * Set up final (full) environment */ bl c_runtime_cpu_setup /* still call old routine */ -#endif /* !CONFIG_SPL_BUILD */ -#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK) -#if defined(CONFIG_SPL_BUILD) +#endif /* !CONFIG_XPL_BUILD */ +#if !defined(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK) +#if defined(CONFIG_XPL_BUILD) bl spl_relocate_stack_gd /* may return NULL */ /* set up gd here, outside any C code, if new stack is returned */ cmp x0, #0 diff --git a/arch/arm/lib/eabi_compat.c b/arch/arm/lib/eabi_compat.c index 0a96ba1355f..602efe04c04 100644 --- a/arch/arm/lib/eabi_compat.c +++ b/arch/arm/lib/eabi_compat.c @@ -12,7 +12,7 @@ int raise (int signum) { /* Even if printf() is available, it's large. Punt it for SPL builds */ -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) printf("raise: Signal # %d caught\n", signum); #endif return 0; diff --git a/arch/arm/lib/stack.c b/arch/arm/lib/stack.c index 2b21ec0734e..78507b76894 100644 --- a/arch/arm/lib/stack.c +++ b/arch/arm/lib/stack.c @@ -17,7 +17,7 @@ DECLARE_GLOBAL_DATA_PTR;

int arch_reserve_stacks(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD gd->start_addr_sp -= 128; /* leave 32 words for abort-stack */ gd->irq_sp = gd->start_addr_sp; #else diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S index b6b879339df..cf3f6c3e65c 100644 --- a/arch/arm/lib/vectors.S +++ b/arch/arm/lib/vectors.S @@ -133,7 +133,7 @@ _fiq: .word fiq

/* SPL interrupt handling: just hang */

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

#if !CONFIG_IS_ENABLED(SYS_NO_VECTOR_TABLE) .align 5 @@ -166,7 +166,7 @@ fiq: b 1b /* hang and never return */ #endif

-#else /* !CONFIG_SPL_BUILD */ +#else /* !CONFIG_XPL_BUILD */

/* IRQ stack memory (calculated at run-time) + 8 bytes */ .globl IRQ_STACK_START_IN @@ -332,4 +332,4 @@ fiq: bad_save_user_regs bl do_fiq

-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/arch/arm/lib/zimage.c b/arch/arm/lib/zimage.c index 51287251b3f..7e1cd4dd8bc 100644 --- a/arch/arm/lib/zimage.c +++ b/arch/arm/lib/zimage.c @@ -24,14 +24,14 @@ int bootz_setup(ulong image, ulong *start, ulong *end)

if (zi->zi_magic != LINUX_ARM_ZIMAGE_MAGIC && zi->zi_magic != BAREBOX_IMAGE_MAGIC) { - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) puts("zimage: Bad magic!\n"); return 1; }

*start = zi->zi_start; *end = zi->zi_end; - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) printf("Kernel image @ %#08lx [ %#08lx - %#08lx ]\n", image, *start, *end);

diff --git a/arch/arm/mach-aspeed/ast2600/Makefile b/arch/arm/mach-aspeed/ast2600/Makefile index 448d3201aff..18f9f75e8ef 100644 --- a/arch/arm/mach-aspeed/ast2600/Makefile +++ b/arch/arm/mach-aspeed/ast2600/Makefile @@ -1,2 +1,2 @@ obj-y += lowlevel_init.o board_common.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/arch/arm/mach-aspeed/ast2600/lowlevel_init.S b/arch/arm/mach-aspeed/ast2600/lowlevel_init.S index 594963d039d..d1c31068685 100644 --- a/arch/arm/mach-aspeed/ast2600/lowlevel_init.S +++ b/arch/arm/mach-aspeed/ast2600/lowlevel_init.S @@ -97,7 +97,7 @@ .globl lowlevel_init

lowlevel_init: -#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL) && !defined(CONFIG_XPL_BUILD) mov pc, lr #else /* setup ARM arch timer frequency */ diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index cbd0ed68c27..447cd80642c 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+

obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o -ifneq ($(CONFIG_SPL_BUILD),) +ifneq ($(CONFIG_XPL_BUILD),) obj-$(CONFIG_AT91SAM9260) += sdram.o spl_at91.o obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o diff --git a/arch/arm/mach-at91/config.mk b/arch/arm/mach-at91/config.mk index 5426394651e..a31612b8179 100644 --- a/arch/arm/mach-at91/config.mk +++ b/arch/arm/mach-at91/config.mk @@ -3,7 +3,7 @@ PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,) endif

ifeq ($(CONFIG_CPU_V7A),y) -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD INPUTS-y += u-boot.img endif endif diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index ae171e3ee22..c994f97bab8 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -9,7 +9,7 @@ obj-y += cpu.o misc.o timer.o psc.o pinmux.o reset.o obj-$(CONFIG_DA850_LOWLEVEL) += da850_lowlevel.o obj-$(CONFIG_SOC_DA850) += da850_pinmux.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_FRAMEWORK) += spl.o obj-$(CONFIG_SOC_DA8XX) += da850_lowlevel.o endif diff --git a/arch/arm/mach-davinci/config.mk b/arch/arm/mach-davinci/config.mk index edbac8e8e21..3b972a26c0c 100644 --- a/arch/arm/mach-davinci/config.mk +++ b/arch/arm/mach-davinci/config.mk @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+ # # Copyright (C) 2012, Texas Instruments, Incorporated - https://www.ti.com/ -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD INPUTS-$(CONFIG_SPL_FRAMEWORK) += u-boot.ais endif diff --git a/arch/arm/mach-davinci/misc.c b/arch/arm/mach-davinci/misc.c index 6c97e5810cd..07125eac7cd 100644 --- a/arch/arm/mach-davinci/misc.c +++ b/arch/arm/mach-davinci/misc.c @@ -21,7 +21,7 @@

DECLARE_GLOBAL_DATA_PTR;

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index dd097cf5418..ebdc3b89d05 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_ARM64) += mmu-arm64.o

obj-$(CONFIG_EXYNOS5420) += sec_boot.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_ARCH_EXYNOS5) += clock_init_exynos5.o obj-$(CONFIG_ARCH_EXYNOS5) += dmc_common.o dmc_init_ddr3.o obj-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o diff --git a/arch/arm/mach-exynos/lowlevel_init.c b/arch/arm/mach-exynos/lowlevel_init.c index 0967ab995a9..0c50b2e2b99 100644 --- a/arch/arm/mach-exynos/lowlevel_init.c +++ b/arch/arm/mach-exynos/lowlevel_init.c @@ -221,8 +221,8 @@ int do_lowlevel_init(void) if (actions & DO_CLOCKS) { system_clock_init(); #ifdef CONFIG_DEBUG_UART -#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL)) || \ - !defined(CONFIG_SPL_BUILD) +#if (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL)) || \ + !defined(CONFIG_XPL_BUILD) exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE); debug_uart_init(); #endif diff --git a/arch/arm/mach-exynos/pinmux.c b/arch/arm/mach-exynos/pinmux.c index 07d19fd17ba..48c325190d5 100644 --- a/arch/arm/mach-exynos/pinmux.c +++ b/arch/arm/mach-exynos/pinmux.c @@ -171,7 +171,7 @@ static int exynos5420_mmc_config(int peripheral, int flags) * this same assumption. */ if ((peripheral == PERIPH_ID_SDMMC0) && (i == (start + 2))) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD gpio_request(i, "sdmmc0_vdden"); #endif gpio_set_value(i, 1); diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f8903afc92e..af62a39a671 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -10,7 +10,7 @@ obj-y = iomux-v3.o endif

ifeq ($(SOC),$(filter $(SOC),imx8m)) -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o endif obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o @@ -22,7 +22,7 @@ obj-y += cpu.o endif

ifeq ($(SOC),$(filter $(SOC),imx8m imx9)) -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-y += fdt.o endif endif @@ -38,7 +38,7 @@ endif ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs imx8m imx8 imx9 imxrt)) obj-y += misc.o obj-$(CONFIG_CMD_PRIBLOB) += priblob.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o endif ifeq ($(SOC),$(filter $(SOC),mx7)) obj-y += cpu.o @@ -46,7 +46,7 @@ obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o obj-$(CONFIG_ENV_IS_IN_MMC) += mmc_env.o endif ifeq ($(SOC),$(filter $(SOC),mx7 imx8m)) -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_FSL_MFGPROT) += cmd_mfgprot.o endif endif @@ -57,7 +57,7 @@ ifeq ($(SOC),$(filter $(SOC),mx6 mx7)) obj-y += cache.o init.o obj-$(CONFIG_FEC_MXC) += mac.o obj-$(CONFIG_IMX_RDC) += rdc-sema.o -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o endif obj-$(CONFIG_$(SPL_)SATA) += sata.o @@ -73,18 +73,18 @@ obj-y += ddrmc-vf610.o obj-$(CONFIG_DDRMC_VF610_CALIBRATION) += ddrmc-vf610-calibration.o endif ifeq ($(SOC),$(filter $(SOC),imx8)) -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o endif endif -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o obj-$(CONFIG_CMD_NANDBCB) += cmd_nandbcb.o endif

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_SPL_LOAD_IMX_CONTAINER) += image-container.o endif

@@ -128,7 +128,7 @@ container.cfg: $(IMX_CONTAINER_CFG) FORCE ifeq ($(CONFIG_ARCH_IMX8), y) CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh IMAGE_TYPE := imx8image -ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) SPL_DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG); if [ -f spl/u-boot-spl.cfgout ]; then $(CNTR_DEPFILES) spl/u-boot-spl.cfgout; echo $$?; fi) endif DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi) diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index ceee31eecd7..17de9ff98ec 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -39,7 +39,7 @@ u32 get_imx_reset_cause(void) if (reset_cause == -1) { reset_cause = readl(&src_regs->srsr); /* preserve the value for U-Boot proper */ -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) writel(reset_cause, &src_regs->srsr); #endif } @@ -47,7 +47,7 @@ u32 get_imx_reset_cause(void) return reset_cause; }

-#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_XPL_BUILD) static char *get_reset_cause(void) { switch (get_imx_reset_cause()) { @@ -92,7 +92,7 @@ static char *get_reset_cause(void) } #endif

-#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DISPLAY_CPUINFO) && !defined(CONFIG_XPL_BUILD)

const char *get_imx_type(u32 imxtype) { diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c index 85d90686f68..a8107f46ae5 100644 --- a/arch/arm/mach-imx/hab.c +++ b/arch/arm/mach-imx/hab.c @@ -245,7 +245,7 @@ void *hab_rvt_authenticate_image(uint8_t cid, ptrdiff_t ivt_offset, return ret; }

-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD)

#define MAX_RECORD_BYTES (8*1024) /* 4 kbytes */

@@ -727,7 +727,7 @@ U_BOOT_CMD( "" );

-#endif /* !defined(CONFIG_SPL_BUILD) */ +#endif /* !defined(CONFIG_XPL_BUILD) */

/* Get CSF Header length */ static int get_hab_hdr_len(struct hab_hdr *hdr) @@ -939,7 +939,7 @@ int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size, puts("Dumping CSF Header\n"); print_buffer(ivt->csf, (void *)(uintptr_t)(ivt->csf), 4, 0x10, 0);

-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) get_hab_status(); #endif

@@ -989,7 +989,7 @@ int imx_hab_authenticate_image(uint32_t ddr_start, uint32_t image_size, }

hab_exit_failure_print_status: -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) get_hab_status(); #endif

diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index 834aca82bcf..2ff4ff35e49 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -89,11 +89,11 @@ __weak void reset_cpu(void)

int arch_cpu_init(void) { -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RECOVER_DATA_SECTION) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RECOVER_DATA_SECTION) spl_save_restore_data(); #endif

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct pass_over_info_t *pass_over;

if (is_soc_rev(CHIP_REV_A)) { diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c index d7fd102c955..d5745f67262 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c @@ -51,7 +51,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num) return 0; }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static struct imx_int_pll_rate_table imx8mm_fracpll_tbl[] = { PLL_1443X_RATE(1000000000U, 250, 3, 1, 0), PLL_1443X_RATE(933000000U, 311, 4, 1, 0), diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mq.c b/arch/arm/mach-imx/imx8m/clock_imx8mq.c index 43e677deae2..2f53430b4d0 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mq.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mq.c @@ -611,7 +611,7 @@ void dram_disable_bypass(void) CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV5)); }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void dram_pll_init(ulong pll_val) { u32 val; @@ -791,7 +791,7 @@ int clock_init(void) /* * Dump some clockes. */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_imx8m_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 46974bf0618..b0ab00fbd98 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -45,7 +45,7 @@ struct imx_sec_config_fuse_t const imx_sec_config_fuse = {

int timer_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR; unsigned long freq = readl(&sctr->cntfid0);

@@ -255,7 +255,7 @@ int dram_init(void) return ret;

/* rom_pointer[1] contains the size of TEE occupies */ - if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) + if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) gd->ram_size = sdram_size - rom_pointer[1]; else gd->ram_size = sdram_size; @@ -284,7 +284,7 @@ int dram_init_banksize(void) }

gd->bd->bi_dram[bank].start = PHYS_SDRAM; - if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) { + if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) { phys_addr_t optee_start = (phys_addr_t)rom_pointer[0]; phys_size_t optee_size = (size_t)rom_pointer[1];

@@ -329,7 +329,7 @@ phys_size_t get_effective_memsize(void) sdram_b1_size = sdram_size; }

- if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_SPL_BUILD) && + if (!IS_ENABLED(CONFIG_ARMV8_PSCI) && !IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) { /* We will relocate u-boot to Top of dram1. Tee position has two cases: * 1. At the top of dram1, Then return the size removed optee size. @@ -612,7 +612,7 @@ static void early_enable_caches(void) phys_size_t sdram_size; int entry, ret;

- if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return;

if (CONFIG_IS_ENABLED(SYS_ICACHE_OFF) || CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) @@ -646,7 +646,7 @@ int arch_cpu_init(void) * ROM might disable clock for SCTR, * enable the clock before timer_init. */ - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) clock_enable(CCGR_SCTR, 1); /* * Init timer at very early state, because sscg pll setting @@ -654,7 +654,7 @@ int arch_cpu_init(void) */ timer_init();

- if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { clock_init(); imx_set_wdog_powerdown(false);

@@ -1476,7 +1476,7 @@ int arch_misc_init(void) } #endif

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) #if defined(CONFIG_IMX8MQ) || defined(CONFIG_IMX8MM) || defined(CONFIG_IMX8MN) bool serror_need_skip = true;

diff --git a/arch/arm/mach-imx/imx8ulp/Makefile b/arch/arm/mach-imx/imx8ulp/Makefile index 2c9938fcdf0..b478dab59d0 100644 --- a/arch/arm/mach-imx/imx8ulp/Makefile +++ b/arch/arm/mach-imx/imx8ulp/Makefile @@ -6,6 +6,6 @@ obj-y += lowlevel_init.o obj-y += soc.o clock.o iomux.o pcc.o cgc.o rdc.o

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-y += upower/ endif diff --git a/arch/arm/mach-imx/imx8ulp/clock.c b/arch/arm/mach-imx/imx8ulp/clock.c index fadf165ece2..c390f20d769 100644 --- a/arch/arm/mach-imx/imx8ulp/clock.c +++ b/arch/arm/mach-imx/imx8ulp/clock.c @@ -519,7 +519,7 @@ u32 get_lpuart_clk(void) return pcc_clock_get_rate(lpuart_pcc[index], lpuart_pcc_slots[index]); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Dump some core clockes. */ diff --git a/arch/arm/mach-imx/imx8ulp/lowlevel_init.S b/arch/arm/mach-imx/imx8ulp/lowlevel_init.S index 791c26407c9..9ede695dbba 100644 --- a/arch/arm/mach-imx/imx8ulp/lowlevel_init.S +++ b/arch/arm/mach-imx/imx8ulp/lowlevel_init.S @@ -16,7 +16,7 @@ rom_pointer:

.global save_boot_params save_boot_params: -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* The firmware provided ATAG/FDT address can be found in r2/x0 */ adr x0, rom_pointer stp x1, x2, [x0], #16 diff --git a/arch/arm/mach-imx/imx8ulp/soc.c b/arch/arm/mach-imx/imx8ulp/soc.c index c3722c60836..b5dc45296d1 100644 --- a/arch/arm/mach-imx/imx8ulp/soc.c +++ b/arch/arm/mach-imx/imx8ulp/soc.c @@ -104,7 +104,7 @@ enum bt_mode get_boot_mode(void)

bool m33_image_booted(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { u32 gp6 = 0;

/* DGO_GP6 */ @@ -124,7 +124,7 @@ bool m33_image_booted(void)

bool rdc_enabled_in_boot(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { u32 val = 0; int ret; bool rdc_en = true; /* Default assume DBD_EN is set */ @@ -146,7 +146,7 @@ bool rdc_enabled_in_boot(void)

static void spl_pass_boot_info(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { bool m33_booted = m33_image_booted(); bool rdc_en = rdc_enabled_in_boot(); u32 val = 0; @@ -164,7 +164,7 @@ static void spl_pass_boot_info(void) bool is_m33_handshake_necessary(void) { /* Only need handshake in u-boot */ - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) return (m33_image_booted() || rdc_enabled_in_boot()); else return false; @@ -716,7 +716,7 @@ void set_lpav_qos(void)

int arch_cpu_init(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { /* Enable System Reset Interrupt using WDOG_AD */ setbits_le32(CMC1_BASE_ADDR + 0x8C, BIT(13)); /* Clear AD_PERIPH Power switch domain out of reset interrupt flag */ @@ -805,7 +805,7 @@ int imx8ulp_dm_post_init(void) } EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_F, imx8ulp_dm_post_init);

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { debug("image entry point: 0x%lx\n", spl_image->entry_point); diff --git a/arch/arm/mach-imx/imx9/Makefile b/arch/arm/mach-imx/imx9/Makefile index e1b09ab5341..45a9105a75a 100644 --- a/arch/arm/mach-imx/imx9/Makefile +++ b/arch/arm/mach-imx/imx9/Makefile @@ -5,6 +5,6 @@ obj-y += lowlevel_init.o obj-y += soc.o clock.o clock_root.o trdc.o

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD obj-y += imx_bootaux.o #endif diff --git a/arch/arm/mach-imx/imx9/clock.c b/arch/arm/mach-imx/imx9/clock.c index 12685f970de..dda57ed7f55 100644 --- a/arch/arm/mach-imx/imx9/clock.c +++ b/arch/arm/mach-imx/imx9/clock.c @@ -640,7 +640,7 @@ void enable_usboh3_clk(unsigned char enable) } }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void dram_pll_init(ulong pll_val) { configure_fracpll(DRAM_PLL_CLK, pll_val); @@ -950,7 +950,7 @@ int set_clk_enet(enum enet_freq type) /* * Dump some clockes. */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int do_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) { u32 freq; diff --git a/arch/arm/mach-imx/imx9/lowlevel_init.S b/arch/arm/mach-imx/imx9/lowlevel_init.S index 1dc1dbfcddc..97d85911041 100644 --- a/arch/arm/mach-imx/imx9/lowlevel_init.S +++ b/arch/arm/mach-imx/imx9/lowlevel_init.S @@ -16,7 +16,7 @@ rom_pointer:

.global save_boot_params save_boot_params: -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* The firmware provided ATAG/FDT address can be found in r2/x0 */ adr x0, rom_pointer stp x1, x2, [x0], #16 diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c index 04b21207a28..7c28fa39e14 100644 --- a/arch/arm/mach-imx/imx9/soc.c +++ b/arch/arm/mach-imx/imx9/soc.c @@ -383,7 +383,7 @@ int dram_init(void) return ret;

/* rom_pointer[1] contains the size of TEE occupies */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) + if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) gd->ram_size = sdram_size - rom_pointer[1]; else gd->ram_size = sdram_size; @@ -412,7 +412,7 @@ int dram_init_banksize(void) }

gd->bd->bi_dram[bank].start = PHYS_SDRAM; - if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) { phys_addr_t optee_start = (phys_addr_t)rom_pointer[0]; phys_size_t optee_size = (size_t)rom_pointer[1];

@@ -457,7 +457,7 @@ phys_size_t get_effective_memsize(void) else sdram_b1_size = sdram_size;

- if (!IS_ENABLED(CONFIG_SPL_BUILD) && rom_pointer[1]) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && rom_pointer[1]) { /* We will relocate u-boot to top of dram1. TEE position has two cases: * 1. At the top of dram1, Then return the size removed optee size. * 2. In the middle of dram1, return the size of dram1. @@ -629,7 +629,7 @@ static int low_drive_freq_update(void *blob) }

#ifdef CONFIG_OF_BOARD_FIXUP -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int board_fix_fdt(void *fdt) { /* Update dtb clocks for low drive mode */ @@ -701,7 +701,7 @@ static void save_reset_cause(void)

int arch_cpu_init(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { /* Disable wdog */ init_wdog();

@@ -745,7 +745,7 @@ EVENT_SPY_SIMPLE(EVT_DM_POST_INIT_R, imx9_probe_mu);

int timer_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR; unsigned long freq = readl(&sctr->cntfid0);

diff --git a/arch/arm/mach-imx/mx5/clock.c b/arch/arm/mach-imx/mx5/clock.c index 0b8a10fd729..41116e2c6a2 100644 --- a/arch/arm/mach-imx/mx5/clock.c +++ b/arch/arm/mach-imx/mx5/clock.c @@ -940,7 +940,7 @@ void mxc_set_sata_internal_clock(void) } #endif

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Dump some core clockes. */ diff --git a/arch/arm/mach-imx/mx6/Makefile b/arch/arm/mach-imx/mx6/Makefile index 7ea8f91e4f0..da461b0be9b 100644 --- a/arch/arm/mach-imx/mx6/Makefile +++ b/arch/arm/mach-imx/mx6/Makefile @@ -7,7 +7,7 @@

obj-y := soc.o clock.o obj-$(CONFIG_IMX_MODULE_FUSE) += module_fuse.o -obj-$(CONFIG_SPL_BUILD) += ddr.o +obj-$(CONFIG_XPL_BUILD) += ddr.o obj-$(CONFIG_MP) += mp.o obj-$(CONFIG_MX6UL_LITESOM) += litesom.o obj-$(CONFIG_MX6UL_OPOS6UL) += opos6ul.o diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c index fb9f56d2e63..b5aa606b8d0 100644 --- a/arch/arm/mach-imx/mx6/clock.c +++ b/arch/arm/mach-imx/mx6/clock.c @@ -1367,7 +1367,7 @@ void disable_ipu_clock(void) } #endif

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Dump some core clockes. */ diff --git a/arch/arm/mach-imx/mx6/litesom.c b/arch/arm/mach-imx/mx6/litesom.c index 03e1214c060..c6bf933df94 100644 --- a/arch/arm/mach-imx/mx6/litesom.c +++ b/arch/arm/mach-imx/mx6/litesom.c @@ -78,7 +78,7 @@ int litesom_mmc_init(struct bd_info *bis) } #endif

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <linux/libfdt.h> #include <spl.h> #include <asm/arch/mx6-ddr.h> diff --git a/arch/arm/mach-imx/mx6/opos6ul.c b/arch/arm/mach-imx/mx6/opos6ul.c index 340e6147b63..6a79dcb5bd1 100644 --- a/arch/arm/mach-imx/mx6/opos6ul.c +++ b/arch/arm/mach-imx/mx6/opos6ul.c @@ -79,7 +79,7 @@ int dram_init(void) return 0; }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #include <asm/arch/mx6-ddr.h> #include <linux/libfdt.h> #include <spl.h> @@ -210,4 +210,4 @@ void board_init_f(ulong dummy) /* DDR initialization */ spl_dram_init(); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c index 2c0c77e1a56..9b40fe9235a 100644 --- a/arch/arm/mach-imx/mx6/soc.c +++ b/arch/arm/mach-imx/mx6/soc.c @@ -37,7 +37,7 @@ struct scu_regs { u32 fpga_rev; };

-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX_THERMAL) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_IMX_THERMAL) static const struct imx_thermal_plat imx6_thermal_plat = { .regs = (void *)ANATOP_BASE_ADDR, .fuse_bank = 1, @@ -565,7 +565,7 @@ int board_postclk_init(void) return 0; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * cfg_val will be used for * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] @@ -600,7 +600,7 @@ const struct boot_mode soc_boot_modes[] = {

void reset_misc(void) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if defined(CONFIG_VIDEO_MXS) && !defined(CONFIG_VIDEO) lcdif_power_down(); #endif diff --git a/arch/arm/mach-imx/mx7/clock.c b/arch/arm/mach-imx/mx7/clock.c index a8606fa9b24..a8328a0b224 100644 --- a/arch/arm/mach-imx/mx7/clock.c +++ b/arch/arm/mach-imx/mx7/clock.c @@ -1100,7 +1100,7 @@ void epdc_clock_disable(void) } #endif

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Dump some core clockes. */ diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c index 16c77cbf7be..1b891a2db3d 100644 --- a/arch/arm/mach-imx/mx7/soc.c +++ b/arch/arm/mach-imx/mx7/soc.c @@ -432,7 +432,7 @@ void s_init(void) return; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD const struct boot_mode soc_boot_modes[] = { {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, {"primary", MAKE_CFGVAL_PRIMARY_BOOT}, @@ -450,7 +450,7 @@ int boot_mode_getprisec(void)

void reset_misc(void) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if defined(CONFIG_VIDEO_MXS) && !defined(CONFIG_VIDEO) lcdif_power_down(); #endif diff --git a/arch/arm/mach-imx/mx7ulp/clock.c b/arch/arm/mach-imx/mx7ulp/clock.c index fb19c62a520..eca92955a17 100644 --- a/arch/arm/mach-imx/mx7ulp/clock.c +++ b/arch/arm/mach-imx/mx7ulp/clock.c @@ -327,7 +327,7 @@ void hab_caam_clock_enable(unsigned char enable) } #endif

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Dump some core clockes. */ diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index 198ae2d919c..980e0226156 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -171,7 +171,7 @@ static bool ldo_mode_is_enabled(void) return false; }

-#if !defined(CONFIG_SPL) || (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD)) +#if !defined(CONFIG_SPL) || (defined(CONFIG_SPL) && defined(CONFIG_XPL_BUILD)) #if defined(CONFIG_LDO_ENABLED_MODE) static void init_ldo_mode(void) { diff --git a/arch/arm/mach-imx/syscounter.c b/arch/arm/mach-imx/syscounter.c index 922f851c56b..96fe2c7c17b 100644 --- a/arch/arm/mach-imx/syscounter.c +++ b/arch/arm/mach-imx/syscounter.c @@ -59,7 +59,7 @@ static inline unsigned long long us_to_tick(unsigned long long usec) return usec; }

-#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) || IS_ENABLED(CONFIG_SPL_BUILD) +#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) || IS_ENABLED(CONFIG_XPL_BUILD) int timer_init(void) { struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR; diff --git a/arch/arm/mach-k3/am62ax/Makefile b/arch/arm/mach-k3/am62ax/Makefile index 1717ca343d6..e2ef88196f8 100644 --- a/arch/arm/mach-k3/am62ax/Makefile +++ b/arch/arm/mach-k3/am62ax/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com

obj-$(CONFIG_OF_SYSTEM_SETUP) += am62a7_fdt.o -obj-$(CONFIG_SPL_BUILD) += am62a7_init.o +obj-$(CONFIG_XPL_BUILD) += am62a7_init.o diff --git a/arch/arm/mach-k3/am62px/Makefile b/arch/arm/mach-k3/am62px/Makefile index eed91a033eb..3165435f265 100644 --- a/arch/arm/mach-k3/am62px/Makefile +++ b/arch/arm/mach-k3/am62px/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com

obj-$(CONFIG_OF_SYSTEM_SETUP) += am62p5_fdt.o -obj-$(CONFIG_SPL_BUILD) += am62p5_init.o +obj-$(CONFIG_XPL_BUILD) += am62p5_init.o diff --git a/arch/arm/mach-k3/am62x/Makefile b/arch/arm/mach-k3/am62x/Makefile index 8494cdda482..ca10b6a8d3d 100644 --- a/arch/arm/mach-k3/am62x/Makefile +++ b/arch/arm/mach-k3/am62x/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+

obj-$(CONFIG_OF_SYSTEM_SETUP) += am625_fdt.o -obj-$(CONFIG_SPL_BUILD) += am625_init.o +obj-$(CONFIG_XPL_BUILD) += am625_init.o obj-y += boot.o diff --git a/arch/arm/mach-k3/am64x/Makefile b/arch/arm/mach-k3/am64x/Makefile index d0b286276c8..053a8239999 100644 --- a/arch/arm/mach-k3/am64x/Makefile +++ b/arch/arm/mach-k3/am64x/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+

-obj-$(CONFIG_SPL_BUILD) += am642_init.o +obj-$(CONFIG_XPL_BUILD) += am642_init.o obj-y += boot.o diff --git a/arch/arm/mach-k3/am65x/Makefile b/arch/arm/mach-k3/am65x/Makefile index 20d5f1d3bf1..34734f24ff7 100644 --- a/arch/arm/mach-k3/am65x/Makefile +++ b/arch/arm/mach-k3/am65x/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com

obj-$(CONFIG_OF_SYSTEM_SETUP) += am654_fdt.o -obj-$(CONFIG_SPL_BUILD) += am654_init.o +obj-$(CONFIG_XPL_BUILD) += am654_init.o diff --git a/arch/arm/mach-k3/arm64/cache.S b/arch/arm/mach-k3/arm64/cache.S index 17cfb12f108..6a507ae3af5 100644 --- a/arch/arm/mach-k3/arm64/cache.S +++ b/arch/arm/mach-k3/arm64/cache.S @@ -7,7 +7,7 @@ #include <config.h> #include <linux/linkage.h>

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) ENTRY(__asm_invalidate_l3_dcache) /* Invalidate SPL address range */ mov x0, #CONFIG_SPL_TEXT_BASE diff --git a/arch/arm/mach-k3/j721e/Makefile b/arch/arm/mach-k3/j721e/Makefile index 982b88db57d..e4b0e5a8193 100644 --- a/arch/arm/mach-k3/j721e/Makefile +++ b/arch/arm/mach-k3/j721e/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com

obj-$(CONFIG_OF_SYSTEM_SETUP) += j721e_fdt.o -obj-$(CONFIG_SPL_BUILD) += j721e_init.o +obj-$(CONFIG_XPL_BUILD) += j721e_init.o diff --git a/arch/arm/mach-k3/j721s2/Makefile b/arch/arm/mach-k3/j721s2/Makefile index ceef68297c9..051ef1b11d8 100644 --- a/arch/arm/mach-k3/j721s2/Makefile +++ b/arch/arm/mach-k3/j721s2/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com

obj-$(CONFIG_OF_SYSTEM_SETUP) += j721s2_fdt.o -obj-$(CONFIG_SPL_BUILD) += j721s2_init.o +obj-$(CONFIG_XPL_BUILD) += j721s2_init.o diff --git a/arch/arm/mach-k3/j721s2/j721s2_init.c b/arch/arm/mach-k3/j721s2/j721s2_init.c index 05453fcad41..64c34d3dbd6 100644 --- a/arch/arm/mach-k3/j721s2/j721s2_init.c +++ b/arch/arm/mach-k3/j721s2/j721s2_init.c @@ -312,7 +312,7 @@ void do_dt_magic(void) } #endif

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { k3_spl_init(); diff --git a/arch/arm/mach-k3/j722s/Makefile b/arch/arm/mach-k3/j722s/Makefile index 2b1fec131ed..9b0dd8afd8b 100644 --- a/arch/arm/mach-k3/j722s/Makefile +++ b/arch/arm/mach-k3/j722s/Makefile @@ -4,4 +4,4 @@ # Jayesh Choudhary j-choudhary@ti.com

obj-$(CONFIG_OF_SYSTEM_SETUP) += j722s_fdt.o -obj-$(CONFIG_SPL_BUILD) += j722s_init.o +obj-$(CONFIG_XPL_BUILD) += j722s_init.o diff --git a/arch/arm/mach-k3/j784s4/Makefile b/arch/arm/mach-k3/j784s4/Makefile index 6d1841e3f9e..1d51bcf6e8c 100644 --- a/arch/arm/mach-k3/j784s4/Makefile +++ b/arch/arm/mach-k3/j784s4/Makefile @@ -4,4 +4,4 @@ # Andrew Davis afd@ti.com

obj-$(CONFIG_OF_SYSTEM_SETUP) += j784s4_fdt.o -obj-$(CONFIG_SPL_BUILD) += j784s4_init.o +obj-$(CONFIG_XPL_BUILD) += j784s4_init.o diff --git a/arch/arm/mach-k3/r5/Makefile b/arch/arm/mach-k3/r5/Makefile index d3886caa064..f533c5e7743 100644 --- a/arch/arm/mach-k3/r5/Makefile +++ b/arch/arm/mach-k3/r5/Makefile @@ -16,6 +16,6 @@ obj-y += common.o obj-y += lowlevel_init.o obj-y += r5_mpu.o

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_K3_LOAD_SYSFW) += sysfw-loader.o endif diff --git a/arch/arm/mach-k3/security.c b/arch/arm/mach-k3/security.c index 7c46914d9dd..3468a370a45 100644 --- a/arch/arm/mach-k3/security.c +++ b/arch/arm/mach-k3/security.c @@ -126,7 +126,7 @@ void ti_secure_image_post_process(void **p_image, size_t *p_size) * via YMODEM. This is done to avoid disturbing the YMODEM serial * protocol transactions. */ - if (!(IS_ENABLED(CONFIG_SPL_BUILD) && + if (!(IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) && spl_boot_device() == BOOT_DEVICE_UART)) printf("Authentication passed\n"); diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile index 6c7c25090a2..c864317baea 100644 --- a/arch/arm/mach-keystone/Makefile +++ b/arch/arm/mach-keystone/Makefile @@ -10,7 +10,7 @@ obj-y += psc.o obj-y += clock.o obj-y += mon.o CFLAGS_REMOVE_mon.o := $(LTO_CFLAGS) -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += cmd_clock.o obj-y += cmd_mon.o obj-y += cmd_poweroff.o diff --git a/arch/arm/mach-keystone/config.mk b/arch/arm/mach-keystone/config.mk index 8eccbdb3018..925a2deee23 100644 --- a/arch/arm/mach-keystone/config.mk +++ b/arch/arm/mach-keystone/config.mk @@ -7,7 +7,7 @@

include $(srctree)/arch/arm/mach-omap2/config_secure.mk

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifeq ($(CONFIG_TI_SECURE_DEVICE),y) INPUTS-y += u-boot_HS_MLO else @@ -25,7 +25,7 @@ OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE $(call if_changed,pad_cat)

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD MKIMAGEFLAGS_MLO = -A $(ARCH) -T gpimage -C none \ -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) -n U-Boot MLO: u-boot.bin FORCE diff --git a/arch/arm/mach-keystone/mon.c b/arch/arm/mach-keystone/mon.c index b945e19ec77..f99b9fbca2e 100644 --- a/arch/arm/mach-keystone/mon.c +++ b/arch/arm/mach-keystone/mon.c @@ -134,7 +134,7 @@ void board_fit_image_post_process(const void *fit, int node, void **p_image, * via YMODEM. This is done to avoid disturbing the YMODEM serial * protocol transactions. */ - if (!(IS_ENABLED(CONFIG_SPL_BUILD) && + if (!(IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) && spl_boot_device() == BOOT_DEVICE_UART)) printf("Authentication passed\n"); diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile index 6303570beea..f551abb4772 100644 --- a/arch/arm/mach-lpc32xx/Makefile +++ b/arch/arm/mach-lpc32xx/Makefile @@ -5,4 +5,4 @@

obj-y = cpu.o clk.o devices.o timer.o

-obj-$(CONFIG_SPL_BUILD) += dram.o lowlevel_init.o +obj-$(CONFIG_XPL_BUILD) += dram.o lowlevel_init.o diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile index 46bdab88206..3d9e4684fb4 100644 --- a/arch/arm/mach-mediatek/Makefile +++ b/arch/arm/mach-mediatek/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0

obj-y += cpu.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o

obj-$(CONFIG_MT8512) += mt8512/ obj-$(CONFIG_TARGET_MT7622) += mt7622/ diff --git a/arch/arm/mach-mediatek/mt7629/lowlevel_init.S b/arch/arm/mach-mediatek/mt7629/lowlevel_init.S index 0a0672cbea7..9f19003e43b 100644 --- a/arch/arm/mach-mediatek/mt7629/lowlevel_init.S +++ b/arch/arm/mach-mediatek/mt7629/lowlevel_init.S @@ -16,7 +16,7 @@

ENTRY(lowlevel_init)

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* Return to U-Boot via saved link register */ mov pc, lr #else diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 329c2e49153..35fd2d0a1d2 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -22,7 +22,7 @@ else # CONFIG_ARCH_KIRKWOOD obj-y = cpu.o obj-y += dram.o obj-y += lowlevel.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o @@ -110,11 +110,11 @@ $(obj)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ include/config/auto.conf $(call cmd,kwbcfg)

-endif # CONFIG_SPL_BUILD +endif # CONFIG_XPL_BUILD obj-y += gpio.o obj-y += mbus.o -obj-$(CONFIG_SPL_BUILD) += spl.o -obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += lowlevel_spl.o

obj-$(CONFIG_ARMADA_38X) += serdes/a38x/ obj-$(CONFIG_ARMADA_XP) += serdes/axp/ diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 8a145a5f742..da44727cf4f 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -52,7 +52,7 @@ void lowlevel_init(void) */ }

-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET) +#if defined(CONFIG_XPL_BUILD) || !defined(CONFIG_ARMADA_32BIT_SYSCON_SYSRESET) void reset_cpu(void) { struct mvebu_system_registers *reg = @@ -549,7 +549,7 @@ static void ahci_mvebu_mbus_config(void __iomem *base) int i;

/* mbus is not initialized in SPL; keep the ROM settings */ - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return;

dram = mvebu_mbus_dram_info(); diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h index af6ce2920e6..37a00501214 100644 --- a/arch/arm/mach-mvebu/include/mach/cpu.h +++ b/arch/arm/mach-mvebu/include/mach/cpu.h @@ -66,7 +66,7 @@ enum cpu_attrib { /* * Default Device Address MAP BAR values */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #ifdef CONFIG_ARMADA_38X #define MBUS_PCI_MEM_BASE 0x88000000 #define MBUS_PCI_MEM_SIZE ((3 * 128) << 20) @@ -81,19 +81,19 @@ enum cpu_attrib { #define MBUS_PCI_IO_BASE 0xF1100000 #define MBUS_PCI_IO_SIZE ((MBUS_PCI_MAX_PORTS * 64) << 10) #endif -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define MBUS_SPI_BASE 0xD4000000 #define MBUS_SPI_SIZE (64 << 20) #else #define MBUS_SPI_BASE 0xF4000000 #define MBUS_SPI_SIZE (8 << 20) #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define MBUS_DFX_BASE 0xF6000000 #define MBUS_DFX_SIZE (1 << 20) #endif #define MBUS_BOOTROM_BASE 0xF8000000 -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define MBUS_BOOTROM_SIZE (128 << 20) #else #define MBUS_BOOTROM_SIZE (8 << 20) diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index dc68d406f99..495530d8452 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -36,7 +36,7 @@ /* SOC specific definations */ #define INTREG_BASE 0xd0000000 #define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080) -#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARMADA_3700) +#if defined(CONFIG_XPL_BUILD) || defined(CONFIG_ARMADA_3700) /* * The SPL U-Boot version still runs with the default * address for the internal registers, configured by diff --git a/arch/arm/mach-mvebu/serdes/a38x/Makefile b/arch/arm/mach-mvebu/serdes/a38x/Makefile index 5a70b375966..c33e272217d 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/Makefile +++ b/arch/arm/mach-mvebu/serdes/a38x/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+

-obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec.o -obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec-38x.o -obj-$(CONFIG_SPL_BUILD) += seq_exec.o -obj-$(CONFIG_SPL_BUILD) += sys_env_lib.o +obj-$(CONFIG_XPL_BUILD) += high_speed_env_spec.o +obj-$(CONFIG_XPL_BUILD) += high_speed_env_spec-38x.o +obj-$(CONFIG_XPL_BUILD) += seq_exec.o +obj-$(CONFIG_XPL_BUILD) += sys_env_lib.o diff --git a/arch/arm/mach-mvebu/serdes/axp/Makefile b/arch/arm/mach-mvebu/serdes/axp/Makefile index 897afb703ad..7d48f8da9ed 100644 --- a/arch/arm/mach-mvebu/serdes/axp/Makefile +++ b/arch/arm/mach-mvebu/serdes/axp/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+

-obj-$(CONFIG_SPL_BUILD) = high_speed_env_lib.o -obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec.o +obj-$(CONFIG_XPL_BUILD) = high_speed_env_lib.o +obj-$(CONFIG_XPL_BUILD) += high_speed_env_spec.o diff --git a/arch/arm/mach-nexell/include/mach/display.h b/arch/arm/mach-nexell/include/mach/display.h index b0ee9126057..3a4e2c47f5e 100644 --- a/arch/arm/mach-nexell/include/mach/display.h +++ b/arch/arm/mach-nexell/include/mach/display.h @@ -265,7 +265,7 @@ int dp_plane_set_enable(int module, int layer, int on); int dp_plane_set_address(int module, int layer, unsigned int address); int dp_plane_wait_vsync(int module, int layer, int fps);

-#if defined CONFIG_SPL_BUILD || \ +#if defined CONFIG_XPL_BUILD || \ (!defined(CONFIG_DM) && !defined(CONFIG_OF_CONTROL)) int nx_display_probe(struct nx_display_plat *plat); #endif diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index d683c64566a..9a85c764a55 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -11,7 +11,7 @@ obj-y += reset.o ifeq ($(CONFIG_TIMER),) obj-y += timer.o else -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += timer.o endif endif diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index 548d6b7cfe4..4e9ad8935e3 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -209,7 +209,7 @@ int cpu_mmc_init(struct bd_info *bis)

/* AM33XX has two MUSB controllers which can be host or gadget */ #if (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \ - defined(CONFIG_SPL_BUILD) + defined(CONFIG_XPL_BUILD)

static struct musb_hdrc_config musb_config = { .multipoint = 1, @@ -282,7 +282,7 @@ int arch_misc_init(void) #if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)

#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)) + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT)) static void rtc32k_unlock(struct davinci_rtc *rtc) { /* @@ -295,7 +295,7 @@ static void rtc32k_unlock(struct davinci_rtc *rtc) } #endif

-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) /* * Write contents of the RTC_SCRATCH1 register based on board type * Two things are passed @@ -331,7 +331,7 @@ int board_early_init_f(void) { set_mux_conf_regs(); prcm_init(); -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) update_rtc_magic(); #endif return 0; @@ -379,7 +379,7 @@ static void watchdog_disable(void) ; }

-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) /* * Check if we are executing rtc-only + DDR mode, and resume from it if needed */ @@ -455,7 +455,7 @@ am43xx_wait:

void s_init(void) { -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_RTC_DDR_SUPPORT) rtc_only(); #endif } @@ -474,7 +474,7 @@ void early_system_init(void) set_uart_mux_conf(); setup_early_clocks(); uart_soft_reset(); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * Save the boot parameters passed from romcode. * We cannot delay the saving further than this, @@ -483,7 +483,7 @@ void early_system_init(void) save_omap_boot_params(); #endif

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD spl_early_init(); #endif

@@ -497,7 +497,7 @@ void early_system_init(void) #endif }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { hw_data_init(); diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c index 649bc07047a..ddd7eeaf052 100644 --- a/arch/arm/mach-omap2/boot-common.c +++ b/arch/arm/mach-omap2/boot-common.c @@ -173,7 +173,7 @@ void save_omap_boot_params(void) #endif }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD u32 spl_boot_device(void) { return gd->arch.omap_boot_device; @@ -208,7 +208,7 @@ void spl_boot_ipu(void) int ret, size; u32 loadaddr = IPU1_LOAD_ADDR;

- if (!IS_ENABLED(CONFIG_SPL_BUILD) || + if (!IS_ENABLED(CONFIG_XPL_BUILD) || !IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU)) return;

@@ -286,7 +286,7 @@ void spl_soc_init(void) #if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) hw_watchdog_init(); #endif - if (IS_ENABLED(CONFIG_SPL_BUILD) && + if (IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_REMOTEPROC_TI_IPU)) spl_boot_ipu(); } diff --git a/arch/arm/mach-omap2/clocks-common.c b/arch/arm/mach-omap2/clocks-common.c index 18d099145c5..f05b16797ec 100644 --- a/arch/arm/mach-omap2/clocks-common.c +++ b/arch/arm/mach-omap2/clocks-common.c @@ -24,7 +24,7 @@ #include <asm/omap_gpio.h> #include <asm/emif.h>

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * printing to console doesn't work unless * this code is executed from SPL diff --git a/arch/arm/mach-omap2/config.mk b/arch/arm/mach-omap2/config.mk index 30d8fb1b1d9..02b26733ee6 100644 --- a/arch/arm/mach-omap2/config.mk +++ b/arch/arm/mach-omap2/config.mk @@ -5,7 +5,7 @@

include $(srctree)/arch/arm/mach-omap2/config_secure.mk

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifeq ($(CONFIG_TI_SECURE_DEVICE),y) # Refer to README.ti-secure for more info # On DRA7xx/AM57xx: # diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk index 40db1aec142..62ac27dfa90 100644 --- a/arch/arm/mach-omap2/config_secure.mk +++ b/arch/arm/mach-omap2/config_secure.mk @@ -4,7 +4,7 @@ quiet_cmd_mkomapsecimg = SECURE $@ ifneq ($(TI_SECURE_DEV_PKG),) ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh),) -ifneq ($(CONFIG_SPL_BUILD),) +ifneq ($(CONFIG_XPL_BUILD),) cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \ $(patsubst u-boot-spl_HS_%,%,$(@F)) $< $@ $(CONFIG_SPL_TEXT_BASE) \ $(if $(KBUILD_VERBOSE:1=), >/dev/null) diff --git a/arch/arm/mach-omap2/hwinit-common.c b/arch/arm/mach-omap2/hwinit-common.c index bb67e50fd56..b1e486a99d9 100644 --- a/arch/arm/mach-omap2/hwinit-common.c +++ b/arch/arm/mach-omap2/hwinit-common.c @@ -113,7 +113,7 @@ static void omap_rev_string(void) puts("\n"); }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void spl_display_print(void) { omap_rev_string(); @@ -175,7 +175,7 @@ void __weak init_package_revision(void) */ int early_system_init(void) { -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT) int ret; int rescan; #endif @@ -183,19 +183,19 @@ int early_system_init(void) hw_data_init(); init_package_revision();

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (warm_reset()) force_emif_self_refresh(); #endif watchdog_init(); set_mux_conf_regs(); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD srcomp_enable(); do_io_settings(); #endif setup_early_clocks();

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * Save the boot parameters passed from romcode. * We cannot delay the saving further than this, @@ -206,7 +206,7 @@ int early_system_init(void) #endif do_board_detect();

-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT) /* * Board detection has been done. * Let us see if another dtb wouldn't be a better match @@ -228,7 +228,7 @@ int early_system_init(void) return 0; }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { early_system_init(); diff --git a/arch/arm/mach-omap2/omap3/Makefile b/arch/arm/mach-omap2/omap3/Makefile index 151bdf6ebc9..159633e7f6d 100644 --- a/arch/arm/mach-omap2/omap3/Makefile +++ b/arch/arm/mach-omap2/omap3/Makefile @@ -15,7 +15,7 @@ obj-y += clock.o obj-y += sys_info.o obj-y += prcm-regs.o obj-y += hw_data.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_OMAP3_ID_NAND) += spl_id_nand.o endif

diff --git a/arch/arm/mach-omap2/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c index 1de343ff48e..4b6ce6940a9 100644 --- a/arch/arm/mach-omap2/omap3/board.c +++ b/arch/arm/mach-omap2/omap3/board.c @@ -211,7 +211,7 @@ void s_init(void) } #endif

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void board_init_f(ulong dummy) { early_system_init(); @@ -280,7 +280,7 @@ void abort(void) { }

-#if defined(CONFIG_NAND_OMAP_GPMC) & !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NAND_OMAP_GPMC) & !defined(CONFIG_XPL_BUILD) /****************************************************************************** * OMAP3 specific command to switch between NAND HW and SW ecc *****************************************************************************/ @@ -331,7 +331,7 @@ U_BOOT_CMD( "nandecc sw - Switch to NAND software ecc algorithm." );

-#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */ +#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_XPL_BUILD */

#ifdef CONFIG_DISPLAY_BOARDINFO /** diff --git a/arch/arm/mach-omap2/omap3/sdrc.c b/arch/arm/mach-omap2/omap3/sdrc.c index 404333689f6..24fae484369 100644 --- a/arch/arm/mach-omap2/omap3/sdrc.c +++ b/arch/arm/mach-omap2/omap3/sdrc.c @@ -146,7 +146,7 @@ static void do_sdrc_init(u32 cs, u32 early) * then set cs_cfg to the appropriate value then try and * setup CS1. */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* set/modify board-specific timings */ get_board_mem_timings(&timings); #endif @@ -166,7 +166,7 @@ static void do_sdrc_init(u32 cs, u32 early)

writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); sdelay(0x20000); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD write_sdrc_timings(CS0, sdrc_actim_base0, &timings); make_cs1_contiguous(); write_sdrc_timings(CS1, sdrc_actim_base1, &timings); diff --git a/arch/arm/mach-omap2/omap5/hwinit.c b/arch/arm/mach-omap2/omap5/hwinit.c index 7f41e85c4a6..42f9c63fe12 100644 --- a/arch/arm/mach-omap2/omap5/hwinit.c +++ b/arch/arm/mach-omap2/omap5/hwinit.c @@ -50,7 +50,7 @@ void do_set_mux32(u32 base, struct pad_conf_entry const *array, int size) writel(pad->val, base + pad->offset); }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* LPDDR2 specific IO settings */ static void io_settings_lpddr2(void) { diff --git a/arch/arm/mach-omap2/sec-common.c b/arch/arm/mach-omap2/sec-common.c index 16bbc93f4a3..b1d11a4d1a4 100644 --- a/arch/arm/mach-omap2/sec-common.c +++ b/arch/arm/mach-omap2/sec-common.c @@ -178,7 +178,7 @@ auth_exit: * via YMODEM. This is done to avoid disturbing the YMODEM serial * protocol transactions. */ - if (!(IS_ENABLED(CONFIG_SPL_BUILD) && + if (!(IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) && spl_boot_device() == BOOT_DEVICE_UART)) printf("Authentication passed\n"); diff --git a/arch/arm/mach-orion5x/cpu.c b/arch/arm/mach-orion5x/cpu.c index 58ee67eca50..4eba69a6909 100644 --- a/arch/arm/mach-orion5x/cpu.c +++ b/arch/arm/mach-orion5x/cpu.c @@ -235,7 +235,7 @@ int arch_cpu_init(void) /* Enable and invalidate L2 cache in write through mode */ invalidate_l2_cache();

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD orion5x_config_adr_windows(); #endif

diff --git a/arch/arm/mach-orion5x/lowlevel_init.S b/arch/arm/mach-orion5x/lowlevel_init.S index aa3fcf7c301..358d2a49fbb 100644 --- a/arch/arm/mach-orion5x/lowlevel_init.S +++ b/arch/arm/mach-orion5x/lowlevel_init.S @@ -69,7 +69,7 @@

lowlevel_init:

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

/* Use 'r2 as the base for internal register accesses */ ldr r2, =ORION5X_REGS_PHY_BASE @@ -280,7 +280,7 @@ lowlevel_init: ldr r0, =0x7fff0001 str r0, [r3, #0x504]

-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

/* Return to U-Boot via saved link register */ mov pc, lr diff --git a/arch/arm/mach-renesas/include/mach/boot0.h b/arch/arm/mach-renesas/include/mach/boot0.h index 1d8c3eea99c..fe88a2e0373 100644 --- a/arch/arm/mach-renesas/include/mach/boot0.h +++ b/arch/arm/mach-renesas/include/mach/boot0.h @@ -9,7 +9,7 @@ _start: ARM_VECTORS

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .word 0x0badc0d3; .word 0x0badc0d3; .word 0x0badc0d3; diff --git a/arch/arm/mach-renesas/lowlevel_init_ca15.S b/arch/arm/mach-renesas/lowlevel_init_ca15.S index 059cd738785..ecefa3d5c43 100644 --- a/arch/arm/mach-renesas/lowlevel_init_ca15.S +++ b/arch/arm/mach-renesas/lowlevel_init_ca15.S @@ -11,7 +11,7 @@ #include <system-constants.h>

ENTRY(lowlevel_init) -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD mrc p15, 0, r4, c0, c0, 5 /* mpidr */ orr r4, r4, r4, lsr #6 and r4, r4, #7 /* id 0-3 = ca15.0,1,2,3 */ diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 3b13891ec24..76756c3661b 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -15,7 +15,7 @@ obj-tpl-$(CONFIG_ROCKCHIP_PX30) += px30-board-tpl.o

obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o

-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),)

# Always include boot_mode.o, as we bypass it (i.e. turn it off) # inside of boot_mode.c when CONFIG_ROCKCHIP_BOOT_MODE_REG is 0. This way, @@ -51,5 +51,5 @@ obj-$(CONFIG_ROCKCHIP_RV1126) += rv1126/ obj-spl-$(CONFIG_TPL_BUILD) =

# Now add SPL/TPL objects back into the main build -obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y) +obj-$(CONFIG_XPL_BUILD) += $(obj-spl-y) obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y) diff --git a/arch/arm/mach-rockchip/px30/px30.c b/arch/arm/mach-rockchip/px30/px30.c index 8b1509e55f2..8ce9ac561f0 100644 --- a/arch/arm/mach-rockchip/px30/px30.c +++ b/arch/arm/mach-rockchip/px30/px30.c @@ -244,7 +244,7 @@ int arch_cpu_init(void) static struct px30_cru * const cru = (void *)CRU_BASE; u32 __maybe_unused val;

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* We do some SoC one time setting here. */ /* Disable the ddr secure region setting to make it non-secure */ writel(0x0, DDR_FW_BASE + FW_DDR_CON); diff --git a/arch/arm/mach-rockchip/rk3036/Makefile b/arch/arm/mach-rockchip/rk3036/Makefile index 299fc50635d..038180c275c 100644 --- a/arch/arm/mach-rockchip/rk3036/Makefile +++ b/arch/arm/mach-rockchip/rk3036/Makefile @@ -6,7 +6,7 @@

obj-y += clk_rk3036.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += syscon_rk3036.o endif

diff --git a/arch/arm/mach-rockchip/rk3066/rk3066.c b/arch/arm/mach-rockchip/rk3066/rk3066.c index 70b55ca8abf..b8c177a4d0d 100644 --- a/arch/arm/mach-rockchip/rk3066/rk3066.c +++ b/arch/arm/mach-rockchip/rk3066/rk3066.c @@ -27,7 +27,7 @@ void board_debug_uart_init(void)

void spl_board_init(void) { - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) return;

if (IS_ENABLED(CONFIG_SPL_DM_MMC)) { diff --git a/arch/arm/mach-rockchip/rk3188/rk3188.c b/arch/arm/mach-rockchip/rk3188/rk3188.c index 53b2eaa2d53..7cce1112fbd 100644 --- a/arch/arm/mach-rockchip/rk3188/rk3188.c +++ b/arch/arm/mach-rockchip/rk3188/rk3188.c @@ -51,7 +51,7 @@ void board_debug_uart_init(void) } #endif

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int arch_cpu_init(void) { struct rk3188_grf *grf; @@ -106,7 +106,7 @@ int rk_board_late_init(void) return rk3188_board_late_init(); }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static int setup_led(void) { #ifdef CONFIG_SPL_LED diff --git a/arch/arm/mach-rockchip/rk322x/rk322x.c b/arch/arm/mach-rockchip/rk322x/rk322x.c index 712c0524266..e35ca7778e7 100644 --- a/arch/arm/mach-rockchip/rk322x/rk322x.c +++ b/arch/arm/mach-rockchip/rk322x/rk322x.c @@ -51,7 +51,7 @@ void board_debug_uart_init(void)

int arch_cpu_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SGRF_BASE 0x10150000 static struct rk322x_sgrf * const sgrf = (void *)SGRF_BASE;

diff --git a/arch/arm/mach-rockchip/rk3288/rk3288.c b/arch/arm/mach-rockchip/rk3288/rk3288.c index d1170f7e23d..62dd9da6578 100644 --- a/arch/arm/mach-rockchip/rk3288/rk3288.c +++ b/arch/arm/mach-rockchip/rk3288/rk3288.c @@ -31,7 +31,7 @@ const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = { [BROM_BOOTSOURCE_SD] = "/mmc@ff0c0000", };

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static void configure_l2ctlr(void) { u32 l2ctlr; @@ -72,7 +72,7 @@ int rk3288_qos_init(void)

int arch_cpu_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD configure_l2ctlr(); #else /* We do some SoC one time setting here. */ diff --git a/arch/arm/mach-rockchip/rk3308/rk3308.c b/arch/arm/mach-rockchip/rk3308/rk3308.c index 6f88638d156..c6b1a35f47e 100644 --- a/arch/arm/mach-rockchip/rk3308/rk3308.c +++ b/arch/arm/mach-rockchip/rk3308/rk3308.c @@ -185,7 +185,7 @@ __weak void board_debug_uart_init(void) } #endif

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) int arch_cpu_init(void) { static struct rk3308_sgrf * const sgrf = (void *)SGRF_BASE; diff --git a/arch/arm/mach-rockchip/rk3328/rk3328.c b/arch/arm/mach-rockchip/rk3328/rk3328.c index c86d11943d6..12ad17d9e8b 100644 --- a/arch/arm/mach-rockchip/rk3328/rk3328.c +++ b/arch/arm/mach-rockchip/rk3328/rk3328.c @@ -62,7 +62,7 @@ struct mm_region *mem_map = rk3328_mem_map;

int arch_cpu_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD u32 reg;

/* We do some SoC one time setting here. */ diff --git a/arch/arm/mach-rockchip/rk3368/rk3368.c b/arch/arm/mach-rockchip/rk3368/rk3368.c index f589bf67328..97b9500da25 100644 --- a/arch/arm/mach-rockchip/rk3368/rk3368.c +++ b/arch/arm/mach-rockchip/rk3368/rk3368.c @@ -93,7 +93,7 @@ int arch_early_init_r(void) } #endif

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * The SPL (and also the full U-Boot stage on the RK3368) will run in * secure mode (i.e. EL3) and an ATF will eventually be booted before diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index 2d7d0f82a2f..edccb2a3980 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -51,7 +51,7 @@ static struct mm_region rk3399_mem_map[] = {

struct mm_region *mem_map = rk3399_mem_map;

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

#define TIMER_END_COUNT_L 0x00 #define TIMER_END_COUNT_H 0x04 @@ -83,7 +83,7 @@ void rockchip_stimer_init(void) int arch_cpu_init(void) {

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct rk3399_pmusgrf_regs *sgrf; struct rk3399_grf_regs *grf;

@@ -136,7 +136,7 @@ void board_debug_uart_init(void) struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE; struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;

- if (IS_ENABLED(CONFIG_SPL_BUILD) && + if (IS_ENABLED(CONFIG_XPL_BUILD) && (IS_ENABLED(CONFIG_TARGET_CHROMEBOOK_BOB) || IS_ENABLED(CONFIG_TARGET_CHROMEBOOK_KEVIN))) { rk_setreg(&grf->io_vsel, 1 << 0); @@ -169,7 +169,7 @@ void board_debug_uart_init(void) } #endif

-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) +#if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD) static void rk3399_force_power_on_reset(void) { ofnode node; diff --git a/arch/arm/mach-rockchip/rk3568/rk3568.c b/arch/arm/mach-rockchip/rk3568/rk3568.c index 1b3e40074e3..768a3739329 100644 --- a/arch/arm/mach-rockchip/rk3568/rk3568.c +++ b/arch/arm/mach-rockchip/rk3568/rk3568.c @@ -105,7 +105,7 @@ void board_debug_uart_init(void)

int arch_cpu_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * When perform idle operation, corresponding clock can * be opened or gated automatically. diff --git a/arch/arm/mach-rockchip/rk3588/rk3588.c b/arch/arm/mach-rockchip/rk3588/rk3588.c index d3162d3447e..e2dac2a5b80 100644 --- a/arch/arm/mach-rockchip/rk3588/rk3588.c +++ b/arch/arm/mach-rockchip/rk3588/rk3588.c @@ -111,7 +111,7 @@ void board_debug_uart_init(void) GPIO0B5_UART2_TX_M0 << GPIO0B5_SHIFT); }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void rockchip_stimer_init(void) { /* If Timer already enabled, don't re-init it */ @@ -130,7 +130,7 @@ void rockchip_stimer_init(void) #ifndef CONFIG_TPL_BUILD int arch_cpu_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #ifdef CONFIG_ROCKCHIP_DISABLE_FORCE_JTAG static struct rk3588_sysgrf * const sys_grf = (void *)SYS_GRF_BASE; #endif diff --git a/arch/arm/mach-rockchip/rv1108/Makefile b/arch/arm/mach-rockchip/rv1108/Makefile index 9035a1a8923..283fc966e7b 100644 --- a/arch/arm/mach-rockchip/rv1108/Makefile +++ b/arch/arm/mach-rockchip/rv1108/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += syscon_rv1108.o endif obj-y += rv1108.o diff --git a/arch/arm/mach-rockchip/rv1126/rv1126.c b/arch/arm/mach-rockchip/rv1126/rv1126.c index 1c10e9b9f23..27ed5dc19e1 100644 --- a/arch/arm/mach-rockchip/rv1126/rv1126.c +++ b/arch/arm/mach-rockchip/rv1126/rv1126.c @@ -66,7 +66,7 @@ int arch_cpu_init(void) * since they are unsecure. * (Note: only secure-world can access this register) */ - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) writel(0, FIREWALL_APB_BASE + FW_DDR_CON_REG);

return 0; diff --git a/arch/arm/mach-sc5xx/Makefile b/arch/arm/mach-sc5xx/Makefile index eeb56c078b3..598a13031b4 100644 --- a/arch/arm/mach-sc5xx/Makefile +++ b/arch/arm/mach-sc5xx/Makefile @@ -15,5 +15,5 @@ obj-$(CONFIG_SC58X) += sc58x.o obj-$(CONFIG_SC59X) += sc59x.o obj-$(CONFIG_SC59X_64) += sc59x_64.o

-obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o obj-$(CONFIG_SYSCON) += rcu.o diff --git a/arch/arm/mach-sc5xx/config.mk b/arch/arm/mach-sc5xx/config.mk index 580964e559c..e7e4c9a1181 100644 --- a/arch/arm/mach-sc5xx/config.mk +++ b/arch/arm/mach-sc5xx/config.mk @@ -8,7 +8,7 @@ # Contact: Greg Malysa greg.malysa@timesys.com #

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD INPUTS-y += $(obj)/u-boot-spl.ldr endif

diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index 67c6a8dfec5..5fc61b4a5c6 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -80,7 +80,7 @@ obj-y += wrap_handoff_soc64.o obj-y += wrap_pll_config_soc64.o endif

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_TARGET_SOCFPGA_GEN5 obj-y += spl_gen5.o obj-y += freeze_controller.o diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c index feaf5ce4596..24a15f7903f 100644 --- a/arch/arm/mach-socfpga/board.c +++ b/arch/arm/mach-socfpga/board.c @@ -102,7 +102,7 @@ u8 socfpga_get_board_id(void) u32 jtag_usercode; int err;

-#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_ATF) +#if !IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_ATF) err = smc_get_usercode(&jtag_usercode); #else u32 resp_len = 1; @@ -130,7 +130,7 @@ u8 socfpga_get_board_id(void) return board_id; }

-#if IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_TARGET_SOCFPGA_SOC64) +#if IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_TARGET_SOCFPGA_SOC64) int board_fit_config_name_match(const char *name) { char board_name[10]; @@ -154,7 +154,7 @@ void board_fit_image_post_process(const void *fit, int node, void **p_image, } #endif

-#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_FIT) +#if !IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_FIT) void board_prep_linux(struct bootm_headers *images) { bool use_fit = false; diff --git a/arch/arm/mach-socfpga/clock_manager.c b/arch/arm/mach-socfpga/clock_manager.c index 160f6e73ca9..134eaf08e0a 100644 --- a/arch/arm/mach-socfpga/clock_manager.c +++ b/arch/arm/mach-socfpga/clock_manager.c @@ -99,7 +99,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void) } #endif

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/arch/arm/mach-socfpga/clock_manager_arria10.c b/arch/arm/mach-socfpga/clock_manager_arria10.c index 58b9321131a..5674194f4d1 100644 --- a/arch/arm/mach-socfpga/clock_manager_arria10.c +++ b/arch/arm/mach-socfpga/clock_manager_arria10.c @@ -12,7 +12,7 @@ #include <asm/arch/clock_manager.h> #include <linux/delay.h>

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

void sdelay(unsigned long loops); u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr, diff --git a/arch/arm/mach-socfpga/include/mach/boot0.h b/arch/arm/mach-socfpga/include/mach/boot0.h index c78def5066e..2676d6c8283 100644 --- a/arch/arm/mach-socfpga/include/mach/boot0.h +++ b/arch/arm/mach-socfpga/include/mach/boot0.h @@ -9,7 +9,7 @@ _start: ARM_VECTORS

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .balignl 64,0xf33db33f;

.word 0x1337c0d3; /* SoCFPGA preloader validation word */ diff --git a/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h b/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h index 553ebe660de..80d5047b469 100644 --- a/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h +++ b/arch/arm/mach-socfpga/include/mach/clock_manager_arria10.h @@ -62,7 +62,7 @@ #define CLKMGR_INTER CLKMGR_A10_INTER #define CLKMGR_PERPLL_EN CLKMGR_A10_PERPLL_EN

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int cm_basic_init(const void *blob); #endif

diff --git a/arch/arm/mach-socfpga/lowlevel_init_soc64.S b/arch/arm/mach-socfpga/lowlevel_init_soc64.S index 875927cc4d9..8926c2d1d9c 100644 --- a/arch/arm/mach-socfpga/lowlevel_init_soc64.S +++ b/arch/arm/mach-socfpga/lowlevel_init_soc64.S @@ -13,7 +13,7 @@ ENTRY(lowlevel_init) mov x29, lr /* Save LR */

#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) wait_for_atf: ldr x4, =CPU_RELEASE_ADDR ldr x5, [x4] diff --git a/arch/arm/mach-socfpga/mailbox_s10.c b/arch/arm/mach-socfpga/mailbox_s10.c index 4c86f1e9917..2b4f26040fe 100644 --- a/arch/arm/mach-socfpga/mailbox_s10.c +++ b/arch/arm/mach-socfpga/mailbox_s10.c @@ -400,7 +400,7 @@ error:

int mbox_reset_cold(void) { -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) psci_system_reset(); #else int ret; diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c index 495ba2a0d41..46f9c82bbb2 100644 --- a/arch/arm/mach-socfpga/misc.c +++ b/arch/arm/mach-socfpga/misc.c @@ -180,7 +180,7 @@ int arch_cpu_init(void) return 0; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_bridge(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-socfpga/misc_arria10.c index 34c21317894..c442af02888 100644 --- a/arch/arm/mach-socfpga/misc_arria10.c +++ b/arch/arm/mach-socfpga/misc_arria10.c @@ -58,7 +58,7 @@ static Altera_desc altera_fpga[] = { }, };

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) static struct pl310_regs *const pl310 = (struct pl310_regs *)CFG_SYS_PL310_BASE; static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base = diff --git a/arch/arm/mach-socfpga/misc_gen5.c b/arch/arm/mach-socfpga/misc_gen5.c index b898b6f8f22..b136691c685 100644 --- a/arch/arm/mach-socfpga/misc_gen5.c +++ b/arch/arm/mach-socfpga/misc_gen5.c @@ -213,7 +213,7 @@ int arch_early_init_r(void) return 0; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static struct socfpga_sdr_ctrl *sdr_ctrl = (struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS;

diff --git a/arch/arm/mach-socfpga/reset_manager_s10.c b/arch/arm/mach-socfpga/reset_manager_s10.c index dd0383c7c76..a634c11a028 100644 --- a/arch/arm/mach-socfpga/reset_manager_s10.c +++ b/arch/arm/mach-socfpga/reset_manager_s10.c @@ -58,7 +58,7 @@ void socfpga_per_reset_all(void)

void socfpga_bridges_reset(int enable) { -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) u64 arg = enable;

int ret = invoke_smc(INTEL_SIP_SMC_HPS_SET_BRIDGES, &arg, 1, NULL, 0); diff --git a/arch/arm/mach-socfpga/secure_vab.c b/arch/arm/mach-socfpga/secure_vab.c index 4347bf6e792..e931f1043b3 100644 --- a/arch/arm/mach-socfpga/secure_vab.c +++ b/arch/arm/mach-socfpga/secure_vab.c @@ -120,7 +120,7 @@ int socfpga_vendor_authentication(void **p_image, size_t *p_size) debug("mbox_relocate_data_addr = 0x%p\n", mbox_relocate_data_addr);

do { - if (!IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_ATF)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_ATF)) { /* Invoke SMC call to ATF to send the VAB certificate to SDM */ ret = smc_send_mailbox(MBOX_VAB_SRC_CERT, mbox_data_sz, (u32 *)mbox_relocate_data_addr, 0, &resp_len, diff --git a/arch/arm/mach-socfpga/timer_s10.c b/arch/arm/mach-socfpga/timer_s10.c index 80933586319..1a4e7c0e7e2 100644 --- a/arch/arm/mach-socfpga/timer_s10.c +++ b/arch/arm/mach-socfpga/timer_s10.c @@ -14,7 +14,7 @@ */ int timer_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int enable = 0x3; /* timer enable + output signal masked */ int loadval = ~0;

@@ -56,4 +56,4 @@ __always_inline void __udelay(unsigned long usec)

while (__get_time_stamp() < tmp + 1) /* loop till event */ ; -} \ No newline at end of file +} diff --git a/arch/arm/mach-socfpga/wrap_pll_config_soc64.c b/arch/arm/mach-socfpga/wrap_pll_config_soc64.c index f13581033e6..60ba557d390 100644 --- a/arch/arm/mach-socfpga/wrap_pll_config_soc64.c +++ b/arch/arm/mach-socfpga/wrap_pll_config_soc64.c @@ -11,7 +11,7 @@

const struct cm_config * const cm_get_default_config(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct cm_config *cm_handoff_cfg = (struct cm_config *) (SOC64_HANDOFF_CLOCK + SOC64_HANDOFF_OFFSET_DATA); u32 *conversion = (u32 *)cm_handoff_cfg; @@ -32,7 +32,7 @@ const struct cm_config * const cm_get_default_config(void)

const unsigned int cm_get_osc_clk_hz(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

u32 clock = readl(SOC64_HANDOFF_CLOCK_OSC);

@@ -50,7 +50,7 @@ const unsigned int cm_get_intosc_clk_hz(void)

const unsigned int cm_get_fpga_clk_hz(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD u32 clock = readl(SOC64_HANDOFF_CLOCK_FPGA);

writel(clock, diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile index ee8a5428feb..db7ed19bd91 100644 --- a/arch/arm/mach-stm32mp/Makefile +++ b/arch/arm/mach-stm32mp/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_STM32MP13X) += stm32mp1/ obj-$(CONFIG_STM32MP25X) += stm32mp2/

obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += cmd_stm32prog/ obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o obj-$(CONFIG_TFABOOT) += boot_params.o diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c index 9ba7a6c9a89..9cbe6a52623 100644 --- a/arch/arm/mach-stm32mp/bsec.c +++ b/arch/arm/mach-stm32mp/bsec.c @@ -409,7 +409,7 @@ static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp) u32 tmp_data = 0; int ret;

- if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_XPL_BUILD)) return stm32_smc(STM32_SMC_BSEC, STM32_SMC_READ_OTP, otp, 0, val); @@ -440,7 +440,7 @@ static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp) { struct stm32mp_bsec_plat *plat;

- if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_XPL_BUILD)) return stm32_smc(STM32_SMC_BSEC, STM32_SMC_READ_SHADOW, otp, 0, val); @@ -469,7 +469,7 @@ static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp) { struct stm32mp_bsec_plat *plat;

- if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_XPL_BUILD)) return stm32_smc_exec(STM32_SMC_BSEC, STM32_SMC_PROG_OTP, otp, val); @@ -484,7 +484,7 @@ static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp) { struct stm32mp_bsec_plat *plat;

- if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_XPL_BUILD)) return stm32_smc_exec(STM32_SMC_BSEC, STM32_SMC_WRITE_SHADOW, otp, val); @@ -504,7 +504,7 @@ static int stm32mp_bsec_write_lock(struct udevice *dev, u32 val, u32 otp) return 0; /* nothing to do */ }

- if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_ARM_SMCCC) && !IS_ENABLED(CONFIG_XPL_BUILD)) return stm32_smc_exec(STM32_SMC_BSEC, STM32_SMC_WRLOCK_OTP, otp, 0); @@ -762,7 +762,7 @@ static int stm32mp_bsec_probe(struct udevice *dev) * update unlocked shadow for OTP cleared by the rom code * only executed in SPL, it is done in TF-A for TFABOOT */ - if (IS_ENABLED(CONFIG_SPL_BUILD) && !data->ta) { + if (IS_ENABLED(CONFIG_XPL_BUILD) && !data->ta) { plat = dev_get_plat(dev);

/* here 57 is the value for STM32MP15x ROM code, only MPU with SPL support*/ diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile b/arch/arm/mach-stm32mp/stm32mp1/Makefile index ebae50f66c9..5ae1a536ff1 100644 --- a/arch/arm/mach-stm32mp/stm32mp1/Makefile +++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile @@ -8,7 +8,7 @@ obj-y += cpu.o obj-$(CONFIG_STM32MP13X) += stm32mp13x.o obj-$(CONFIG_STM32MP15X) += stm32mp15x.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-y += tzc400.o else diff --git a/arch/arm/mach-stm32mp/stm32mp1/cpu.c b/arch/arm/mach-stm32mp/stm32mp1/cpu.c index 64480da9f8d..26c073f06a0 100644 --- a/arch/arm/mach-stm32mp/stm32mp1/cpu.c +++ b/arch/arm/mach-stm32mp/stm32mp1/cpu.c @@ -57,7 +57,7 @@ void dram_bank_mmu_setup(int bank) bool use_lmb = false; enum dcache_option option;

- if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { /* STM32_SYSRAM_BASE exist only when SPL is supported */ #ifdef CONFIG_SPL start = ALIGN_DOWN(STM32_SYSRAM_BASE, MMU_SECTION_SIZE); @@ -133,7 +133,7 @@ int mach_cpu_init(void) if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) && (boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART) gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE; - else if (IS_ENABLED(CONFIG_DEBUG_UART) && IS_ENABLED(CONFIG_SPL_BUILD)) + else if (IS_ENABLED(CONFIG_DEBUG_UART) && IS_ENABLED(CONFIG_XPL_BUILD)) debug_uart_init();

return 0; @@ -339,7 +339,7 @@ uintptr_t get_stm32mp_bl2_dtb(void) return nt_fw_dtb; }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { typedef void __noreturn (*image_entry_stm32_t)(u32 romapi); diff --git a/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c index f096fe538d8..b6a0ac14101 100644 --- a/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c +++ b/arch/arm/mach-stm32mp/stm32mp1/stm32mp15x.c @@ -214,13 +214,13 @@ static void update_bootmode(void) /* weak function: STM32MP15x mach init for boot without TFA */ void stm32mp_cpu_init(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { security_init(); update_bootmode(); }

/* reset copro state in SPL, when used, or in U-Boot */ - if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_XPL_BUILD)) { /* Reset Coprocessor state unless it wakes up from Standby power mode */ if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) { writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE); diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 3f83c0280ef..eb6a49119a1 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -29,7 +29,7 @@ ifndef CONFIG_ARM64 obj-y += timer.o endif

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += clock.o obj-$(CONFIG_MACH_SUNIV) += dram_suniv.o obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 2b64ddc0dc7..701899ee4b2 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -74,7 +74,7 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) } #endif /* CONFIG_ARM64 */

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static int gpio_init(void) { __maybe_unused uint val; @@ -209,7 +209,7 @@ static int spl_board_load_image(struct spl_image_info *spl_image, return 0; } SPL_LOAD_IMAGE_METHOD("FEL", 0, BOOT_DEVICE_BOARD, spl_board_load_image); -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

#define SUNXI_INVALID_BOOT_SOURCE -1

@@ -258,7 +258,7 @@ static int sunxi_get_boot_source(void) * proper, just return MMC0 as a placeholder, for now. */ if (IS_ENABLED(CONFIG_MACH_SUNIV) && - !IS_ENABLED(CONFIG_SPL_BUILD)) + !IS_ENABLED(CONFIG_XPL_BUILD)) return SUNXI_BOOTED_FROM_MMC0;

if (IS_ENABLED(CONFIG_MACH_SUNIV)) @@ -314,7 +314,7 @@ uint32_t sunxi_get_boot_device(void) return -1; /* Never reached */ }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD uint32_t sunxi_get_spl_size(void) { struct boot_file_head *egon_head = (void *)SPL_ADDR; @@ -478,7 +478,7 @@ void board_init_f(ulong dummy) #endif sunxi_board_init(); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

#if !CONFIG_IS_ENABLED(SYSRESET) void reset_cpu(void) diff --git a/arch/arm/mach-sunxi/clock_sun4i.c b/arch/arm/mach-sunxi/clock_sun4i.c index 6458d066f7e..1367b439b83 100644 --- a/arch/arm/mach-sunxi/clock_sun4i.c +++ b/arch/arm/mach-sunxi/clock_sun4i.c @@ -13,7 +13,7 @@ #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h>

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void clock_init_safe(void) { struct sunxi_ccm_reg * const ccm = @@ -175,7 +175,7 @@ void clock_set_pll1(unsigned int hz) &ccm->cpu_ahb_apb0_cfg); sdelay(20); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

/* video, DRAM, PLL_PERIPH clocks */ void clock_set_pll3(unsigned int clk) diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c index cc2ee336416..b424a7893ea 100644 --- a/arch/arm/mach-sunxi/clock_sun50i_h6.c +++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c @@ -3,7 +3,7 @@ #include <asm/arch/clock.h> #include <asm/arch/prcm.h>

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void clock_init_safe(void) { struct sunxi_ccm_reg *const ccm = @@ -131,7 +131,7 @@ int clock_twi_onoff(int port, int state)

return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

/* PLL_PERIPH0 clock, used by the MMC driver */ unsigned int clock_get_pll6(void) diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c index 59f7e15ffe8..657736c7ac2 100644 --- a/arch/arm/mach-sunxi/clock_sun6i.c +++ b/arch/arm/mach-sunxi/clock_sun6i.c @@ -16,7 +16,7 @@ #include <linux/bitops.h> #include <linux/delay.h>

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void clock_init_safe(void) { struct sunxi_ccm_reg * const ccm = @@ -169,7 +169,7 @@ void clock_set_pll1(unsigned int clk) &ccm->cpu_axi_cfg); } } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

/* video, DRAM, PLL_PERIPH clocks */ void clock_set_pll3(unsigned int clk) diff --git a/arch/arm/mach-sunxi/clock_sun8i_a83t.c b/arch/arm/mach-sunxi/clock_sun8i_a83t.c index c00d16a918d..f593749028c 100644 --- a/arch/arm/mach-sunxi/clock_sun8i_a83t.c +++ b/arch/arm/mach-sunxi/clock_sun8i_a83t.c @@ -15,7 +15,7 @@ #include <asm/arch/sys_proto.h> #include <linux/delay.h>

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void clock_init_safe(void) { struct sunxi_ccm_reg * const ccm = @@ -100,7 +100,7 @@ void clock_set_pll1(unsigned int clk) CPU_CLK_SRC_PLL1 << C1_CPUX_CLK_SRC_SHIFT, &ccm->cpu_axi_cfg); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

/* DRAM and PLL_PERIPH0 clock (used by the MMC driver) */ void clock_set_pll5(unsigned int clk) diff --git a/arch/arm/mach-sunxi/clock_sun9i.c b/arch/arm/mach-sunxi/clock_sun9i.c index abdab405445..5f99071f21b 100644 --- a/arch/arm/mach-sunxi/clock_sun9i.c +++ b/arch/arm/mach-sunxi/clock_sun9i.c @@ -14,7 +14,7 @@ #include <asm/arch/prcm.h> #include <asm/arch/sys_proto.h>

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

static void clock_set_pll2(unsigned int clk) { @@ -188,7 +188,7 @@ int clock_twi_onoff(int port, int state)

return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

/* PLL_PERIPH0 clock (used by the MMC driver) */ unsigned int clock_get_pll4_periph0(void) diff --git a/arch/arm/mach-sunxi/gtbus_sun9i.c b/arch/arm/mach-sunxi/gtbus_sun9i.c index a058fea6bef..aa93defb25e 100644 --- a/arch/arm/mach-sunxi/gtbus_sun9i.c +++ b/arch/arm/mach-sunxi/gtbus_sun9i.c @@ -11,7 +11,7 @@ #include <asm/arch/gtbus_sun9i.h> #include <asm/arch/sys_proto.h>

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

void gtbus_init(void) { diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 1d22dc3942f..a87e6a6c352 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -5,7 +5,7 @@ # (C) Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += spl.o obj-y += cpu.o else @@ -25,7 +25,7 @@ obj-y += dt-setup.o obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o obj-$(CONFIG_TEGRA_GPU) += gpu.o obj-$(CONFIG_TEGRA_IVC) += ivc.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ARMV7_PSCI) += psci.o endif obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c index c382e042860..cc37878b8d1 100644 --- a/arch/arm/mach-tegra/board.c +++ b/arch/arm/mach-tegra/board.c @@ -47,7 +47,7 @@ enum {

static bool from_spl __section(".data");

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, unsigned long r3) { diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index 7971e3b68d5..e68b8c894bb 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -46,7 +46,7 @@

DECLARE_GLOBAL_DATA_PTR;

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* TODO(sjg@chromium.org): Remove once SPL supports device tree */ U_BOOT_DRVINFO(tegra_gpios) = { "gpio_tegra" diff --git a/arch/arm/mach-tegra/tegra114/Makefile b/arch/arm/mach-tegra/tegra114/Makefile index 346d6cb5696..f1c1042b4e2 100644 --- a/arch/arm/mach-tegra/tegra114/Makefile +++ b/arch/arm/mach-tegra/tegra114/Makefile @@ -2,6 +2,6 @@ # # Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.

-obj-$(CONFIG_SPL_BUILD) += cpu.o +obj-$(CONFIG_XPL_BUILD) += cpu.o

obj-y += clock.o diff --git a/arch/arm/mach-tegra/tegra124/Makefile b/arch/arm/mach-tegra/tegra124/Makefile index 6ea511e7b25..dee790015a3 100644 --- a/arch/arm/mach-tegra/tegra124/Makefile +++ b/arch/arm/mach-tegra/tegra124/Makefile @@ -5,13 +5,13 @@ # SPDX-License-Identifier: GPL-2.0+ #

-obj-$(CONFIG_SPL_BUILD) += cpu.o +obj-$(CONFIG_XPL_BUILD) += cpu.o

obj-y += clock.o obj-y += pmc.o obj-y += xusb-padctl.o obj-y += ../xusb-padctl-common.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ARMV7_NONSEC) += psci.o endif diff --git a/arch/arm/mach-tegra/tegra20/Makefile b/arch/arm/mach-tegra/tegra20/Makefile index c2ae98eb376..2774c866b02 100644 --- a/arch/arm/mach-tegra/tegra20/Makefile +++ b/arch/arm/mach-tegra/tegra20/Makefile @@ -2,7 +2,7 @@ # # (C) Copyright 2010,2011 Nvidia Corporation.

-obj-$(CONFIG_SPL_BUILD) += cpu.o +obj-$(CONFIG_XPL_BUILD) += cpu.o obj-$(CONFIG_$(SPL_)CMD_EBTUPDATE) += bct.o

# The AVP is ARMv4T architecture so we must use special compiler diff --git a/arch/arm/mach-tegra/tegra30/Makefile b/arch/arm/mach-tegra/tegra30/Makefile index ee0e6f5b948..5edc7c9ce7d 100644 --- a/arch/arm/mach-tegra/tegra30/Makefile +++ b/arch/arm/mach-tegra/tegra30/Makefile @@ -2,7 +2,7 @@ # # Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.

-obj-$(CONFIG_SPL_BUILD) += cpu.o +obj-$(CONFIG_XPL_BUILD) += cpu.o obj-$(CONFIG_$(SPL_)CMD_EBTUPDATE) += bct.o

obj-y += clock.o diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 5172efac0c4..d1ec8195dcb 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD

obj-y += boards.o obj-y += spl_board_init.o diff --git a/arch/arm/mach-uniphier/arm32/Makefile b/arch/arm/mach-uniphier/arm32/Makefile index b41aba7e29a..c8ce67ac05a 100644 --- a/arch/arm/mach-uniphier/arm32/Makefile +++ b/arch/arm/mach-uniphier/arm32/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += lowlevel_init.o obj-$(CONFIG_DEBUG_LL) += debug_ll.o else diff --git a/arch/arm/mach-uniphier/boot-device/boot-device.c b/arch/arm/mach-uniphier/boot-device/boot-device.c index 1e6bc8433f7..9d0fe5c8583 100644 --- a/arch/arm/mach-uniphier/boot-device/boot-device.c +++ b/arch/arm/mach-uniphier/boot-device/boot-device.c @@ -214,7 +214,7 @@ int uniphier_boot_from_backend(void) return !!(readl(sg_base + SG_PINMON0) & BIT(27)); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD

static int do_pinmon(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) @@ -267,4 +267,4 @@ U_BOOT_CMD( "" );

-#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile index c49e44754c0..0e47beb5f22 100644 --- a/arch/arm/mach-uniphier/clk/Makefile +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD

obj-$(CONFIG_ARCH_UNIPHIER_LD4) += clk-early-ld4.o clk-dram-ld4.o dpll-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += clk-early-ld4.o clk-dram-ld4.o dpll-pro4.o diff --git a/arch/arm/mach-uniphier/debug-uart/Makefile b/arch/arm/mach-uniphier/debug-uart/Makefile index 81e9314a50d..4202cb3503b 100644 --- a/arch/arm/mach-uniphier/debug-uart/Makefile +++ b/arch/arm/mach-uniphier/debug-uart/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_ARCH_UNIPHIER_LD4) += debug-uart-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += debug-uart-pro4.o obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += debug-uart-sld8.o diff --git a/arch/arm/mach-uniphier/debug-uart/debug-uart.c b/arch/arm/mach-uniphier/debug-uart/debug-uart.c index 1ba012ca45d..6836eb63bfa 100644 --- a/arch/arm/mach-uniphier/debug-uart/debug-uart.c +++ b/arch/arm/mach-uniphier/debug-uart/debug-uart.c @@ -26,7 +26,7 @@ static void _debug_uart_putc(int c) writel(c, base + UNIPHIER_UART_TX); }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void sg_set_pinsel(unsigned int pin, unsigned int muxval, unsigned int mux_bits, unsigned int reg_stride) { @@ -56,7 +56,7 @@ void sg_set_iectrl(unsigned int pin)

void _debug_uart_init(void) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD void __iomem *base = (void __iomem *)CONFIG_VAL(DEBUG_UART_BASE); unsigned int divisor;

diff --git a/arch/arm/mach-uniphier/dram/Makefile b/arch/arm/mach-uniphier/dram/Makefile index 7d11315d07f..36188c38cf9 100644 --- a/arch/arm/mach-uniphier/dram/Makefile +++ b/arch/arm/mach-uniphier/dram/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD

obj-$(CONFIG_ARCH_UNIPHIER_LD4) += umc-ld4.o \ ddrphy-training.o ddrphy-ld4.o diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile index d9b2b999e10..8545331c54a 100644 --- a/arch/arm/mach-zynq/Makefile +++ b/arch/arm/mach-zynq/Makefile @@ -12,4 +12,4 @@ obj-y += slcr.o obj-y += clk.o obj-y += lowlevel_init.o AFLAGS_lowlevel_init.o := -mfpu=neon -obj-$(CONFIG_SPL_BUILD) += spl.o ps7_spl_init.o +obj-$(CONFIG_XPL_BUILD) += spl.o ps7_spl_init.o diff --git a/arch/arm/mach-zynq/cpu.c b/arch/arm/mach-zynq/cpu.c index 5b6d765099d..74dddc25988 100644 --- a/arch/arm/mach-zynq/cpu.c +++ b/arch/arm/mach-zynq/cpu.c @@ -52,7 +52,7 @@ static const struct { int arch_cpu_init(void) { zynq_slcr_unlock(); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* Device config APB, unlock the PCAP */ writel(0x757BDF0D, &devcfg_base->unlock); writel(0xFFFFFFFF, &devcfg_base->rom_shadow); diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile index 38be1627eeb..7c95f32a5c3 100644 --- a/arch/arm/mach-zynqmp/Makefile +++ b/arch/arm/mach-zynqmp/Makefile @@ -5,10 +5,10 @@

obj-y += aes.o clk.o cpu.o obj-$(CONFIG_MP) += mp.o -obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o psu_spl_init.o +obj-$(CONFIG_XPL_BUILD) += spl.o handoff.o psu_spl_init.o obj-$(CONFIG_SPL_ZYNQMP_DRAM_ECC_INIT) += ecc_spl_init.o obj-$(CONFIG_$(SPL_)ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_ZYNQMP) += zynqmp.o -endif # !CONFIG_SPL_BUILD +endif # !CONFIG_XPL_BUILD diff --git a/arch/arm/mach-zynqmp/cpu.c b/arch/arm/mach-zynqmp/cpu.c index 07668c94689..24fd5751216 100644 --- a/arch/arm/mach-zynqmp/cpu.c +++ b/arch/arm/mach-zynqmp/cpu.c @@ -187,7 +187,7 @@ int zynqmp_mmio_write(const u32 address, const u32 mask, const u32 value) { - if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) return zynqmp_mmio_rawwrite(address, mask, value); #if defined(CONFIG_ZYNQMP_FIRMWARE) else @@ -205,7 +205,7 @@ int zynqmp_mmio_read(const u32 address, u32 *value) if (!value) return ret;

- if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { ret = zynqmp_mmio_rawread(address, value); } #if defined(CONFIG_ZYNQMP_FIRMWARE) diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index 64c3f313195..53244046f19 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -11,7 +11,7 @@ PLATFORM_CPPFLAGS += -fdata-sections -ffunction-sections

LDFLAGS_FINAL += --gc-sections

-ifeq ($(CONFIG_SPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD),) PLATFORM_CPPFLAGS += -fPIC LDFLAGS_u-boot += -pic endif diff --git a/arch/microblaze/cpu/Makefile b/arch/microblaze/cpu/Makefile index b8c1dcbe14f..4d4919c3e3f 100644 --- a/arch/microblaze/cpu/Makefile +++ b/arch/microblaze/cpu/Makefile @@ -7,4 +7,4 @@ extra-y = start.o obj-y = irq.o obj-y += interrupts.o cache.o exception.o cpuinfo.o relocate.o obj-$(CONFIG_XILINX_MICROBLAZE0_PVR) += pvr.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index c1e0fcda0a4..69c4efdad7f 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -26,7 +26,7 @@ _start: mts rslr, r0 mts rshr, r20

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) addi r1, r0, CONFIG_SPL_STACK #else add r1, r0, r20 @@ -83,7 +83,7 @@ uboot_sym_start: brlid r15, board_init_f_init_reserve nop

-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /* Setup vectors with pre-relocation symbols */ or r5, r0, r0 brlid r15, __setup_exceptions @@ -122,7 +122,7 @@ clear_bss: brlid r15, debug_uart_init nop #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD or r5, r0, r0 /* flags - empty */ bri board_init_f #else @@ -130,7 +130,7 @@ clear_bss: #endif 1: bri 1b

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .text .ent __setup_exceptions .align 2 diff --git a/arch/mips/Makefile b/arch/mips/Makefile index a007914590f..453c7885075 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -2,7 +2,7 @@

head-y := arch/mips/cpu/start.o

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) head-$(CONFIG_ARCH_JZ47XX) := arch/mips/mach-jz47xx/start.o head-$(CONFIG_SOC_MT7621) := arch/mips/mach-mtmips/mt7621/spl/start.o endif diff --git a/arch/mips/config.mk b/arch/mips/config.mk index 745f03190e9..ad2ea11f72c 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -53,7 +53,7 @@ PLATFORM_ELFFLAGS += -B mips $(OBJCOPYFLAGS) # LDFLAGS_vmlinux += -G 0 -static -n -nostdlib # MODFLAGS += -mlong-calls # -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD OBJCOPYFLAGS += -j .data.reloc -j .dtb.init.rodata LDFLAGS_FINAL += --emit-relocs endif diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 1621cc9a1ff..79841dbe5ed 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -12,6 +12,6 @@ obj-y += traps.o

obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_GO) += boot.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o

lib-$(CONFIG_USE_PRIVATE_LIBGCC) += ashldi3.o ashrdi3.o lshrdi3.o udivdi3.o diff --git a/arch/mips/mach-jz47xx/Makefile b/arch/mips/mach-jz47xx/Makefile index dbb8229f785..5621a09b6dd 100644 --- a/arch/mips/mach-jz47xx/Makefile +++ b/arch/mips/mach-jz47xx/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0+

-extra-$(CONFIG_SPL_BUILD) := start.o +extra-$(CONFIG_XPL_BUILD) := start.o

obj-$(CONFIG_SOC_JZ4780) += jz4780/ diff --git a/arch/mips/mach-jz47xx/include/mach/jz4780.h b/arch/mips/mach-jz47xx/include/mach/jz4780.h index 880445dac39..9f9a8cf9438 100644 --- a/arch/mips/mach-jz47xx/include/mach/jz4780.h +++ b/arch/mips/mach-jz47xx/include/mach/jz4780.h @@ -94,7 +94,7 @@ void jz4780_efuse_init(u32 ahb2_rate);

void jz4780_tcu_wdt_start(void);

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int jz_mmc_init(void __iomem *base); #endif

diff --git a/arch/mips/mach-jz47xx/jz4780/jz4780.c b/arch/mips/mach-jz47xx/jz4780/jz4780.c index 1d6fb6a4e27..504fd27d285 100644 --- a/arch/mips/mach-jz47xx/jz4780/jz4780.c +++ b/arch/mips/mach-jz47xx/jz4780/jz4780.c @@ -19,7 +19,7 @@ #include <mmc.h> #include <spl.h>

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Pointer to the global data structure for SPL */ DECLARE_GLOBAL_DATA_PTR; gd_t gdata __section(".bss"); @@ -73,7 +73,7 @@ void board_init_f(ulong dummy)

hang(); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

phys_addr_t board_get_usable_ram_top(phys_size_t total_size) { diff --git a/arch/mips/mach-jz47xx/start.S b/arch/mips/mach-jz47xx/start.S index 760d0215493..0d40e637a68 100644 --- a/arch/mips/mach-jz47xx/start.S +++ b/arch/mips/mach-jz47xx/start.S @@ -18,7 +18,7 @@ .globl _start .text _start: -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

/* magic value ("MSPL") */ .word 0x4d53504c @@ -95,4 +95,4 @@ enable_caches: .end enable_caches

#endif /* CONFIG_SOC_JZ4780 */ -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/arch/mips/mach-mtmips/Makefile b/arch/mips/mach-mtmips/Makefile index 19f1e07033e..2f35b1a925c 100644 --- a/arch/mips/mach-mtmips/Makefile +++ b/arch/mips/mach-mtmips/Makefile @@ -5,7 +5,7 @@ obj-y += cpu.o ifneq ($(CONFIG_SOC_MT7621),y) obj-y += ddr_init.o obj-y += ddr_cal.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o endif

obj-$(CONFIG_SOC_MT7620) += mt7620/ diff --git a/arch/mips/mach-mtmips/cpu.c b/arch/mips/mach-mtmips/cpu.c index 243938a0ebb..982a5889df8 100644 --- a/arch/mips/mach-mtmips/cpu.c +++ b/arch/mips/mach-mtmips/cpu.c @@ -21,7 +21,7 @@ int dram_init(void) return 0; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int last_stage_init(void) { void *src, *dst; diff --git a/arch/mips/mach-mtmips/mt7620/Makefile b/arch/mips/mach-mtmips/mt7620/Makefile index 649f6c3798f..d2d79e3424b 100644 --- a/arch/mips/mach-mtmips/mt7620/Makefile +++ b/arch/mips/mach-mtmips/mt7620/Makefile @@ -5,6 +5,6 @@ obj-y += init.o obj-y += dram.o obj-y += serial.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += sysc.o endif diff --git a/arch/mips/mach-mtmips/mt7621/Makefile b/arch/mips/mach-mtmips/mt7621/Makefile index bf1b0bb688b..f48083e3559 100644 --- a/arch/mips/mach-mtmips/mt7621/Makefile +++ b/arch/mips/mach-mtmips/mt7621/Makefile @@ -3,7 +3,7 @@ obj-y += init.o obj-y += serial.o

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) ifeq ($(CONFIG_TPL_BUILD),y) obj-y += tpl/ else diff --git a/arch/mips/mach-mtmips/mt7628/Makefile b/arch/mips/mach-mtmips/mt7628/Makefile index 7e139d5adfd..63acf54536b 100644 --- a/arch/mips/mach-mtmips/mt7628/Makefile +++ b/arch/mips/mach-mtmips/mt7628/Makefile @@ -3,4 +3,4 @@ obj-y += lowlevel_init.o obj-y += init.o obj-y += ddr.o -obj-$(CONFIG_SPL_BUILD) += serial.o +obj-$(CONFIG_XPL_BUILD) += serial.o diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index 725a4f48aad..dd0124cace1 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -27,7 +27,7 @@ PLATFORM_CPPFLAGS+= -D__PPC__ endif

# Only test once -ifneq ($(CONFIG_SPL_BUILD),y) +ifneq ($(CONFIG_XPL_BUILD),y) archprepare: checkgcc4

# GCC 3.x is reported to have problems generating the type of relocation diff --git a/arch/powerpc/cpu/mpc83xx/Makefile b/arch/powerpc/cpu/mpc83xx/Makefile index 1255f533e34..9974239f881 100644 --- a/arch/powerpc/cpu/mpc83xx/Makefile +++ b/arch/powerpc/cpu/mpc83xx/Makefile @@ -7,7 +7,7 @@

MINIMAL=

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index ceb54867894..78762f000df 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -41,11 +41,11 @@ #endif

#if defined(CONFIG_NAND_SPL) || \ - (defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)) + (defined(CONFIG_XPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)) #define MINIMAL_SPL #endif

-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NAND_SPL) && \ +#if !defined(CONFIG_XPL_BUILD) && !defined(CONFIG_NAND_SPL) && \ !defined(CONFIG_SYS_RAMBOOT) #define CFG_SYS_FLASHBOOT #endif @@ -168,7 +168,7 @@ _start: /* time t 0 */ /* Initialise the E300 processor core */ /*------------------------------------------*/

-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MPC83XX_WAIT_FOR_NAND)) || \ +#if (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_MPC83XX_WAIT_FOR_NAND)) || \ defined(CONFIG_NAND_SPL) /* The FCM begins execution after only the first page * is loaded. Wait for the rest before branching diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index f3ee7d34949..bf74228efde 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -8,7 +8,7 @@

MINIMAL=

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y @@ -26,7 +26,7 @@ else

obj-$(CONFIG_MP) += release.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_ERRATA) += cmd_errata.o endif

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 574510fa088..75bfc07fe97 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -179,7 +179,7 @@ void cpu_init_early_f(void *fdt) invalidate_tlb(1);

#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && \ - !(CONFIG_IS_ENABLED(INIT_MINIMAL) && defined(CONFIG_SPL_BUILD)) && \ + !(CONFIG_IS_ENABLED(INIT_MINIMAL) && defined(CONFIG_XPL_BUILD)) && \ !defined(CONFIG_NAND_SPL) disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB); #endif diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 3e24a90233c..89bce5bed69 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -28,7 +28,7 @@ #define LAW_EN 0x80000000

#if defined(CONFIG_NAND_SPL) || \ - (defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)) + (defined(CONFIG_XPL_BUILD) && CONFIG_IS_ENABLED(INIT_MINIMAL)) #define MINIMAL_SPL #endif

@@ -58,16 +58,16 @@ END_GOT

#ifdef CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR -#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD)

/* Maximal size of the image */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define MAX_IMAGE_SIZE (CONFIG_SPL_MAX_SIZE - (CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512)) #else #define MAX_IMAGE_SIZE CONFIG_SYS_L2_SIZE #endif

-#if defined(CONFIG_SPL_BUILD) && CONFIG_SPL_MAX_SIZE < CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512 +#if defined(CONFIG_XPL_BUILD) && CONFIG_SPL_MAX_SIZE < CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA * 512 #error "CONFIG_SPL_MAX_SIZE is too small for CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA" #endif

@@ -1138,10 +1138,10 @@ create_init_ram_area: /* * For Targets without CONFIG_SPL like P3, P5 * and for targets with CONFIG_SPL like T1, T2, T4, only for - * u-boot-spl i.e. CONFIG_SPL_BUILD + * u-boot-spl i.e. CONFIG_XPL_BUILD */ #elif defined(CONFIG_RAMBOOT_PBL) && defined(CONFIG_NXP_ESBC) && \ - (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD)) /* create a temp mapping in AS = 1 for mapping CONFIG_VAL(SYS_MONITOR_BASE) * to L3 Address configured by PBL for ISBC code */ @@ -1617,7 +1617,7 @@ relocate_code: mr r10,r5 /* Save copy of Destination Address */

GET_GOT -#if !defined(CONFIG_SPL_SKIP_RELOCATE) || !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL_SKIP_RELOCATE) || !defined(CONFIG_XPL_BUILD) mr r3,r5 /* Destination Address */ lis r4,CONFIG_VAL(SYS_MONITOR_BASE)@h /* Source Address */ ori r4,r4,CONFIG_VAL(SYS_MONITOR_BASE)@l diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 32b68a169a4..415ab1096c6 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -45,7 +45,7 @@ __weak void init_tlbs(void) }

#if !defined(CONFIG_NAND_SPL) && \ - (!defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) + (!defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, phys_addr_t *rpn) { @@ -313,7 +313,7 @@ unsigned int setup_ddr_tlbs_phys(phys_addr_t p_addr, print_size(memsize > CFG_MAX_MEM_MAPPED ? memsize - CFG_MAX_MEM_MAPPED + size : size, " of DDR memory left unmapped in U-Boot\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); #endif } diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index e3a536d4f8c..a44b5165d74 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -4,7 +4,7 @@

MINIMAL=

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c index 3a82e60a247..638c3a6fee5 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c @@ -241,7 +241,7 @@ int pamu_init(void) spaact_size = sizeof(struct paace) * NUM_SPAACT_ENTRIES;

/* Allocate space for Primary PAACT Table */ -#if (defined(CONFIG_SPL_BUILD) && defined(CFG_SPL_PPAACT_ADDR)) +#if (defined(CONFIG_XPL_BUILD) && defined(CFG_SPL_PPAACT_ADDR)) ppaact = (void *)CFG_SPL_PPAACT_ADDR; #else ppaact = memalign(PAMU_TABLE_ALIGNMENT, ppaact_size); @@ -251,7 +251,7 @@ int pamu_init(void) memset(ppaact, 0, ppaact_size);

/* Allocate space for Secondary PAACT Table */ -#if (defined(CONFIG_SPL_BUILD) && defined(CFG_SPL_SPAACT_ADDR)) +#if (defined(CONFIG_XPL_BUILD) && defined(CFG_SPL_SPAACT_ADDR)) sec = (void *)CFG_SPL_SPAACT_ADDR; #else sec = memalign(PAMU_TABLE_ALIGNMENT, spaact_size); diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c index b4695cc99cb..3fd80eb29c0 100644 --- a/arch/powerpc/cpu/mpc8xxx/law.c +++ b/arch/powerpc/cpu/mpc8xxx/law.c @@ -78,7 +78,7 @@ void disable_law(u8 idx) }

#if !defined(CONFIG_NAND_SPL) && \ - (!defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) + (!defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) static int get_law_entry(u8 i, struct law_entry *e) { u32 lawar; @@ -109,7 +109,7 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) }

#if !defined(CONFIG_NAND_SPL) && \ - (!defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) + (!defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(INIT_MINIMAL)) int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { u32 idx; diff --git a/arch/powerpc/cpu/mpc8xxx/pamu_table.c b/arch/powerpc/cpu/mpc8xxx/pamu_table.c index 831a11736cc..bd3f69b469e 100644 --- a/arch/powerpc/cpu/mpc8xxx/pamu_table.c +++ b/arch/powerpc/cpu/mpc8xxx/pamu_table.c @@ -28,7 +28,7 @@ void construct_pamu_addr_table(struct pamu_addr_tbl *tbl, int *num_entries)

i++; #endif -#if (defined(CONFIG_SPL_BUILD) && (CFG_SYS_INIT_L3_VADDR)) +#if (defined(CONFIG_XPL_BUILD) && (CFG_SYS_INIT_L3_VADDR)) tbl->start_addr[i] = (uint64_t)virt_to_phys((void *)CFG_SYS_INIT_L3_VADDR); tbl->size[i] = 256 * 1024; /* 256K CPC flash */ diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 221f9d842a8..f12830984c6 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -36,7 +36,7 @@ #endif /* #ifdef CONFIG_NXP_ESBC */

#ifdef CONFIG_CHAIN_OF_TRUST -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * PPAACT and SPAACT table for PAMU must be placed on DDR after DDR init * due to space crunch on CPC and thus malloc will not work. @@ -45,10 +45,10 @@ #define CFG_SPL_SPAACT_ADDR 0x2f000000 #define CFG_SPL_JR0_LIODN_S 454 #define CFG_SPL_JR0_LIODN_NS 458 -#endif /* ifdef CONFIG_SPL_BUILD */ +#endif /* ifdef CONFIG_XPL_BUILD */

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #include <config_fsl_chain_trust.h> -#endif /* #ifndef CONFIG_SPL_BUILD */ +#endif /* #ifndef CONFIG_XPL_BUILD */ #endif /* #ifdef CONFIG_CHAIN_OF_TRUST */ #endif diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index ecc2aba8f3c..f797f8cee66 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -9,7 +9,7 @@ lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _ashldi3.o _ashrdi3.o _lshrdi3.o

MINIMAL=

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifndef CONFIG_TPL_BUILD ifdef CONFIG_SPL_INIT_MINIMAL MINIMAL=y @@ -45,6 +45,6 @@ obj-y += time.o obj-y += traps.o endif # not minimal

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_$(SPL_TPL)_FRAMEWORK) += spl.o endif diff --git a/arch/riscv/cpu/fu540/Makefile b/arch/riscv/cpu/fu540/Makefile index 043fb961a51..69759c55658 100644 --- a/arch/riscv/cpu/fu540/Makefile +++ b/arch/riscv/cpu/fu540/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2020 SiFive, Inc # Pragnesh Patel pragnesh.patel@sifive.com

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-y += spl.o else obj-y += dram.o diff --git a/arch/riscv/cpu/fu740/Makefile b/arch/riscv/cpu/fu740/Makefile index 1d1ad98ba7c..9071c831992 100644 --- a/arch/riscv/cpu/fu740/Makefile +++ b/arch/riscv/cpu/fu740/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2020-2021 SiFive, Inc # Pragnesh Patel pragnesh.patel@sifive.com

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-y += spl.o else obj-y += dram.o diff --git a/arch/riscv/cpu/jh7110/Makefile b/arch/riscv/cpu/jh7110/Makefile index 951c95631e9..0939c1061d0 100644 --- a/arch/riscv/cpu/jh7110/Makefile +++ b/arch/riscv/cpu/jh7110/Makefile @@ -2,7 +2,7 @@ # # Copyright (C) 2022 StarFive Technology Co., Ltd.

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-y += spl.o else obj-y += cpu.o diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index 8e58f641f1b..3f78932aa9d 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -90,7 +90,7 @@ _start: * Set stackpointer in internal/ex RAM to call board_init_f */ call_board_init_f: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_STACK) li t0, CONFIG_SPL_STACK #else li t0, SYS_INIT_SP_ADDR @@ -218,7 +218,7 @@ wait_for_gd_init: la t5, board_init_f jalr t5 /* jump to board_init_f() */

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD spl_clear_bss: la t0, __bss_start la t1, __bss_end @@ -271,7 +271,7 @@ spl_call_board_init_r: j board_init_r #endif

-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /* * void relocate_code(addr_sp, gd, addr_moni) * @@ -420,7 +420,7 @@ call_board_init_r: * jump to it ... */ jr t4 /* jump to board_init_r() */ -#endif /* !defined(CONFIG_SPL_BUILD) */ +#endif /* !defined(CONFIG_XPL_BUILD) */

#if CONFIG_IS_ENABLED(SMP) hart_out_of_bounds_loop: diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index 65dc49f6fa5..3bc34cd61fb 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -24,7 +24,7 @@ obj-y += reset.o endif obj-y += setjmp.o obj-$(CONFIG_$(SPL_)SMP) += smp.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o obj-y += fdt_fixup.o obj-$(CONFIG_$(SPL)CMD_BDI) += bdinfo.o

diff --git a/arch/riscv/lib/sifive_cache.c b/arch/riscv/lib/sifive_cache.c index d8fe1dfa958..d74544b93d8 100644 --- a/arch/riscv/lib/sifive_cache.c +++ b/arch/riscv/lib/sifive_cache.c @@ -10,7 +10,7 @@ #include <dm/device-internal.h> #include <dm/uclass-internal.h>

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD void enable_caches(void) { struct udevice *dev; @@ -45,4 +45,4 @@ void enable_caches(void)

probe_cache_device(DM_DRIVER_GET(sifive_pl2), dev); } -#endif /* !CONFIG_SPL_BUILD */ +#endif /* !CONFIG_XPL_BUILD */ diff --git a/arch/sandbox/cpu/Makefile b/arch/sandbox/cpu/Makefile index 7c5c52652f5..bfcdc335d32 100644 --- a/arch/sandbox/cpu/Makefile +++ b/arch/sandbox/cpu/Makefile @@ -8,7 +8,7 @@ obj-y := cache.o cpu.o state.o extra-y := start.o os.o extra-$(CONFIG_SANDBOX_SDL) += sdl.o -obj-$(CONFIG_SPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o obj-$(CONFIG_ETH_SANDBOX_RAW) += eth-raw-os.o

# os.c is build in the system environment, so needs standard includes diff --git a/arch/sandbox/cpu/cpu.c b/arch/sandbox/cpu/cpu.c index 51ce40e7f08..06f8c13fab9 100644 --- a/arch/sandbox/cpu/cpu.c +++ b/arch/sandbox/cpu/cpu.c @@ -165,7 +165,7 @@ phys_addr_t virt_to_phys(void *ptr)

void *map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) { -#if defined(CONFIG_PCI) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_PCI) && !defined(CONFIG_XPL_BUILD) unsigned long plen = len; void *ptr;

diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c index 4d3c806840b..81752edc9f8 100644 --- a/arch/sandbox/cpu/start.c +++ b/arch/sandbox/cpu/start.c @@ -129,7 +129,7 @@ static int sandbox_cmdline_cb_help(struct sandbox_state *state, const char *arg) } SANDBOX_CMDLINE_OPT_SHORT(help, 'h', 0, "Display help");

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int sandbox_main_loop_init(void) { struct sandbox_state *state = state_get_current(); diff --git a/arch/x86/Makefile b/arch/x86/Makefile index f1afc74fff8..3c8c541efbc 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -10,7 +10,7 @@ else ifndef CONFIG_SPL head-y := arch/x86/cpu/start.o else -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD head-y = arch/x86/cpu/start_from_tpl.o else head-y = arch/x86/cpu/start_from_spl.o diff --git a/arch/x86/config.mk b/arch/x86/config.mk index 2e3a7119e79..6d4839dfb38 100644 --- a/arch/x86/config.mk +++ b/arch/x86/config.mk @@ -10,7 +10,7 @@ PF_CPPFLAGS_X86 := $(call cc-option, -fno-toplevel-reorder, \ PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_X86) PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD IS_32BIT := y else ifndef CONFIG_X86_64 @@ -26,7 +26,7 @@ endif ifeq ($(IS_32BIT),y) PLATFORM_CPPFLAGS += -march=i386 -m32 else -PLATFORM_CPPFLAGS += $(if $(CONFIG_SPL_BUILD),,-fpic) -fno-common -march=core2 -m64 +PLATFORM_CPPFLAGS += $(if $(CONFIG_XPL_BUILD),,-fpic) -fno-common -march=core2 -m64

ifndef CONFIG_X86_HARDFP PLATFORM_CPPFLAGS += -mno-mmx -mno-sse @@ -86,12 +86,12 @@ ifeq ($(IS_32BIT),y) PLATFORM_CPPFLAGS += -mregparm=3 endif KBUILD_LDFLAGS += --emit-relocs -LDFLAGS_FINAL += --gc-sections $(if $(CONFIG_SPL_BUILD),,-pie) +LDFLAGS_FINAL += --gc-sections $(if $(CONFIG_XPL_BUILD),,-pie)

endif

ifdef CONFIG_X86_64 -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD PLATFORM_CPPFLAGS += -D__x86_64__ else PLATFORM_CPPFLAGS += -D__I386__ diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile index 16e67e3da24..c21d6d6d438 100644 --- a/arch/x86/cpu/Makefile +++ b/arch/x86/cpu/Makefile @@ -15,7 +15,7 @@ else ifndef CONFIG_SPL extra-y = start.o else -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD extra-y = start_from_tpl.o else extra-y = start_from_spl.o diff --git a/arch/x86/cpu/apollolake/Makefile b/arch/x86/cpu/apollolake/Makefile index 2ddf4af62c5..f481f40d9bb 100644 --- a/arch/x86/cpu/apollolake/Makefile +++ b/arch/x86/cpu/apollolake/Makefile @@ -2,20 +2,20 @@ # # Copyright 2019 Google LLC

-obj-$(CONFIG_SPL_BUILD) += cpu_spl.o -obj-$(CONFIG_SPL_BUILD) += spl.o -obj-$(CONFIG_SPL_BUILD) += systemagent.o +obj-$(CONFIG_XPL_BUILD) += cpu_spl.o +obj-$(CONFIG_XPL_BUILD) += spl.o +obj-$(CONFIG_XPL_BUILD) += systemagent.o obj-y += cpu_common.o

ifndef CONFIG_TPL_BUILD obj-y += cpu.o obj-y += punit.o obj-y += fsp_bindings.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += fsp_m.o endif endif -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += acpi.o obj-y += fsp_s.o endif diff --git a/arch/x86/cpu/apollolake/fsp_bindings.c b/arch/x86/cpu/apollolake/fsp_bindings.c index f6fbddce922..b4bb677f5cd 100644 --- a/arch/x86/cpu/apollolake/fsp_bindings.c +++ b/arch/x86/cpu/apollolake/fsp_bindings.c @@ -247,7 +247,7 @@ static int fsp_update_config_from_dtb(ofnode node, u8 *cfg, return 0; }

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) const struct fsp_binding fsp_m_bindings[] = { { .type = FSP_UINT32, @@ -653,7 +653,7 @@ int fsp_m_update_config_from_dtb(ofnode node, struct fsp_m_config *cfg) } #endif

-#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD) const struct fsp_binding fsp_s_bindings[] = { { .type = FSP_UINT8, diff --git a/arch/x86/cpu/broadwell/Makefile b/arch/x86/cpu/broadwell/Makefile index 3e1f76d6118..6c6d0edac9b 100644 --- a/arch/x86/cpu/broadwell/Makefile +++ b/arch/x86/cpu/broadwell/Makefile @@ -6,12 +6,12 @@ obj-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += cpu.o obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += cpu_full.o

ifdef CONFIG_SPL -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += cpu_from_spl.o obj-y += cpu_full.o obj-y += refcode.o endif -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD # obj-y += cpu_from_spl.o obj-y += adsp.o obj-y += sata.o diff --git a/arch/x86/cpu/broadwell/cpu_full.c b/arch/x86/cpu/broadwell/cpu_full.c index c43fb7a608b..529dab18d5d 100644 --- a/arch/x86/cpu/broadwell/cpu_full.c +++ b/arch/x86/cpu/broadwell/cpu_full.c @@ -84,7 +84,7 @@ static const u8 power_limit_time_msr_to_sec[] = { [0x11] = 128, };

-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) +#if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_TPL_BUILD) int arch_cpu_init(void) { return 0; diff --git a/arch/x86/cpu/broadwell/pch.c b/arch/x86/cpu/broadwell/pch.c index 2c8b7380d96..5b6147432a7 100644 --- a/arch/x86/cpu/broadwell/pch.c +++ b/arch/x86/cpu/broadwell/pch.c @@ -606,7 +606,7 @@ static int broadwell_pch_probe(struct udevice *dev) return broadwell_pch_early_init(dev); else return broadwell_pch_init(dev); - } else if (IS_ENABLED(CONFIG_SPL) && !IS_ENABLED(CONFIG_SPL_BUILD)) { + } else if (IS_ENABLED(CONFIG_SPL) && !IS_ENABLED(CONFIG_XPL_BUILD)) { return broadwell_pch_init(dev); } else { return 0; diff --git a/arch/x86/cpu/config.mk b/arch/x86/cpu/config.mk index 87e242a2065..6acdf9b3b23 100644 --- a/arch/x86/cpu/config.mk +++ b/arch/x86/cpu/config.mk @@ -9,7 +9,7 @@ LDPPFLAGS += -DRESET_VEC_LOC=$(CONFIG_RESET_VEC_LOC) LDPPFLAGS += -DSTART_16=$(CONFIG_SYS_X86_START16)

ifdef CONFIG_X86_64 -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_EFI_APP),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_EFI_APP),) LDSCRIPT = $(srctree)/arch/x86/cpu/u-boot-64.lds endif endif diff --git a/arch/x86/cpu/coreboot/Makefile b/arch/x86/cpu/coreboot/Makefile index a6cdb9a1485..a6c7d0e56d5 100644 --- a/arch/x86/cpu/coreboot/Makefile +++ b/arch/x86/cpu/coreboot/Makefile @@ -14,7 +14,7 @@ ifndef CONFIG_SPL obj-y += car.o endif -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-y += coreboot_spl.o else obj-y += sdram.o diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c index d474c79e25e..c3d7442b4a8 100644 --- a/arch/x86/cpu/coreboot/coreboot.c +++ b/arch/x86/cpu/coreboot/coreboot.c @@ -82,7 +82,7 @@ static void board_final_init(void)

static int last_stage_init(void) { - if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) return 0;

board_final_init(); diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index ad21fdb457a..ea11b09eacc 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -185,7 +185,7 @@ void show_boot_progress(int val) #endif

#if !defined(CONFIG_SYS_COREBOOT) && !defined(CONFIG_EFI_STUB) && \ - !defined(CONFIG_SPL_BUILD) + !defined(CONFIG_XPL_BUILD) /* * Implement a weak default function for boards that need to do some final init * before the system is ready. @@ -247,7 +247,7 @@ static int last_stage_init(void) } EVENT_SPY_SIMPLE(EVT_LAST_STAGE_INIT, last_stage_init);

-#endif /* !SYS_COREBOOT && !EFI_STUB && !SPL_BUILD */ +#endif /* !SYS_COREBOOT && !EFI_STUB && !XPL_BUILD */

static int x86_init_cpus(void) { diff --git a/arch/x86/cpu/intel_common/Makefile b/arch/x86/cpu/intel_common/Makefile index 1dc17b45879..2e312a30353 100644 --- a/arch/x86/cpu/intel_common/Makefile +++ b/arch/x86/cpu/intel_common/Makefile @@ -11,13 +11,13 @@ obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += report_platform.o obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += mrc.o endif

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_INTEL_GMA_ACPI) += intel_opregion.o endif

ifdef CONFIG_INTEL_CAR_CQOS obj-$(CONFIG_TPL_BUILD) += car2.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += car2_uninit.o endif endif @@ -38,7 +38,7 @@ obj-$(CONFIG_HAVE_ITSS) += itss.o obj-$(CONFIG_HAVE_P2SB) += p2sb.o

ifdef CONFIG_SPL -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifndef CONFIG_SYS_COREBOOT obj-y += cpu_from_spl.o endif diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile index 716134e9ff3..1f3b0c092f1 100644 --- a/arch/x86/cpu/ivybridge/Makefile +++ b/arch/x86/cpu/ivybridge/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_$(SPL_)X86_32BIT_INIT) += cpu.o obj-y += early_me.o obj-y += lpc.o obj-y += northbridge.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += sata.o endif obj-$(CONFIG_$(SPL_)X86_32BIT_INIT) += sdram.o diff --git a/arch/x86/include/asm/string.h b/arch/x86/include/asm/string.h index 5c49b0f009b..f6836b74488 100644 --- a/arch/x86/include/asm/string.h +++ b/arch/x86/include/asm/string.h @@ -18,7 +18,7 @@ extern char *strchr(const char *s, int c); * Our assembly routines do not work on in 64-bit mode and we don't do a lot of * copying in SPL, so code size is more important there. */ -#if defined(CONFIG_SPL_BUILD) || !IS_ENABLED(CONFIG_X86_32BIT_INIT) +#if defined(CONFIG_XPL_BUILD) || !IS_ENABLED(CONFIG_X86_32BIT_INIT)

#undef __HAVE_ARCH_MEMCPY extern void *memcpy(void *, const void *, __kernel_size_t); diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 8fc35e1b51e..2738f0b577b 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -11,11 +11,11 @@ obj-y += bios_asm.o obj-y += bios_interrupts.o endif

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_X86_32BIT_INIT) += string.o endif

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_BOOTM) += bootm.o endif obj-y += cmd_boot.o @@ -47,7 +47,7 @@ obj-y += acpigen.o obj-$(CONFIG_$(SPL_TPL_)GENERATE_ACPI_TABLE) += acpi_table.o endif obj-y += tables.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_ZBOOT) += zimage.o endif obj-$(CONFIG_USE_HOB) += hob.o @@ -58,7 +58,7 @@ obj-$(CONFIG_FSP_VERSION1) += fsp1/ obj-$(CONFIG_FSP_VERSION2) += fsp2/ endif

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_TPL_BUILD obj-y += tpl.o else @@ -96,7 +96,7 @@ endif

else

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifneq ($(CONFIG_CMD_BOOTEFI_SELFTEST)$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE),) extra-y += $(EFI_CRT0) $(EFI_RELOC) endif diff --git a/arch/x86/lib/fsp/Makefile b/arch/x86/lib/fsp/Makefile index da6c0a886ae..0039dd1bf5c 100644 --- a/arch/x86/lib/fsp/Makefile +++ b/arch/x86/lib/fsp/Makefile @@ -4,7 +4,7 @@

obj-y += fsp_common.o obj-y += fsp_dram.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_VIDEO_FSP) += fsp_graphics.o endif obj-y += fsp_support.o

Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: - Split into several patches

drivers/Makefile | 4 +- drivers/block/Makefile | 2 +- drivers/bus/Makefile | 2 +- drivers/clk/altera/clk-agilex.c | 2 +- drivers/clk/altera/clk-agilex5.c | 2 +- drivers/clk/altera/clk-n5x.c | 2 +- drivers/clk/clk-uclass.c | 2 +- drivers/clk/clk_vexpress_osc.c | 4 +- drivers/clk/clk_zynq.c | 22 +++++----- drivers/clk/imx/clk-imx8mm.c | 6 +-- drivers/clk/imx/clk-imx8mn.c | 6 +-- drivers/clk/imx/clk-imxrt1020.c | 2 +- drivers/clk/imx/clk-imxrt1050.c | 2 +- drivers/clk/rockchip/clk_px30.c | 6 +-- drivers/clk/rockchip/clk_rk3188.c | 6 +-- drivers/clk/rockchip/clk_rk3288.c | 8 ++-- drivers/clk/rockchip/clk_rk3328.c | 4 +- drivers/clk/rockchip/clk_rk3368.c | 14 +++--- drivers/clk/rockchip/clk_rk3399.c | 10 ++--- drivers/clk/rockchip/clk_rk3568.c | 10 ++--- drivers/clk/rockchip/clk_rk3588.c | 14 +++--- drivers/clk/sifive/sifive-prci.c | 2 +- drivers/clk/starfive/clk-jh7110-pll.c | 4 +- drivers/clk/stm32/clk-stm32mp1.c | 6 +-- drivers/core/ofnode.c | 4 +- drivers/crypto/fsl/jobdesc.c | 2 +- drivers/crypto/fsl/jr.c | 6 +-- drivers/ddr/altera/sdram_gen5.c | 4 +- drivers/ddr/fsl/lc_common_dimm_params.c | 6 +-- drivers/ddr/fsl/main.c | 6 +-- drivers/ddr/imx/imx8m/Makefile | 2 +- drivers/ddr/imx/imx8ulp/Makefile | 2 +- drivers/ddr/imx/imx9/Makefile | 2 +- drivers/ddr/imx/phy/Makefile | 2 +- drivers/ddr/marvell/a38x/Makefile | 44 +++++++++---------- drivers/ddr/marvell/a38x/old/Makefile | 28 ++++++------ drivers/ddr/marvell/axp/Makefile | 20 ++++----- drivers/firmware/firmware-zynqmp.c | 10 ++--- drivers/fpga/intel_sdm_mb.c | 2 +- drivers/fpga/zynqpl.c | 6 +-- drivers/gpio/Makefile | 2 +- drivers/gpio/gpio-uclass.c | 4 +- drivers/gpio/pca953x.c | 2 +- drivers/gpio/rk_gpio.c | 4 +- drivers/gpio/s5p_gpio.c | 10 ++--- drivers/gpio/sunxi_gpio.c | 2 +- drivers/gpio/tca642x.c | 2 +- drivers/gpio/tegra_gpio.c | 2 +- drivers/input/Makefile | 2 +- drivers/mailbox/zynqmp-ipi.c | 6 +-- drivers/misc/Makefile | 6 +-- drivers/misc/gsc.c | 2 +- drivers/misc/imx8/scu.c | 2 +- drivers/mmc/Makefile | 2 +- drivers/mmc/mmc-uclass.c | 4 +- drivers/mmc/mmc.c | 20 ++++----- drivers/mmc/mmc_legacy.c | 4 +- drivers/mmc/mmc_private.h | 2 +- drivers/mmc/omap_hsmmc.c | 4 +- drivers/mmc/rockchip_dw_mmc.c | 2 +- drivers/mmc/rockchip_sdhci.c | 2 +- drivers/mmc/socfpga_dw_mmc.c | 2 +- drivers/mmc/tmio-common.c | 2 +- drivers/mmc/uniphier-sd.c | 4 +- drivers/mmc/zynq_sdhci.c | 6 +-- drivers/mtd/Makefile | 2 +- drivers/mtd/nand/Makefile | 2 +- drivers/mtd/nand/raw/Makefile | 2 +- drivers/mtd/nand/raw/atmel_nand.c | 4 +- drivers/mtd/nand/raw/lpc32xx_nand_mlc.c | 6 +-- drivers/mtd/nand/raw/lpc32xx_nand_slc.c | 8 ++-- drivers/mtd/nand/raw/nand_base.c | 10 ++--- drivers/mtd/nand/raw/omap_gpmc.c | 4 +- drivers/mtd/nand/raw/sand_nand.c | 2 +- drivers/mtd/onenand/Makefile | 2 +- drivers/mtd/spi/Makefile | 2 +- drivers/mtd/spi/sf-uclass.c | 2 +- drivers/mtd/spi/sf_dataflash.c | 2 +- drivers/mtd/spi/spi-nor-core.c | 4 +- drivers/net/dwc_eth_xgmac_socfpga.c | 2 +- drivers/net/dwmac_socfpga.c | 2 +- drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 4 +- drivers/pinctrl/pinctrl_stm32.c | 4 +- drivers/pinctrl/tegra/Makefile | 2 +- drivers/pinctrl/uniphier/pinctrl-uniphier.h | 2 +- drivers/power/Makefile | 2 +- drivers/power/pmic/rk8xx.c | 4 +- drivers/power/pmic/stpmic1.c | 6 +-- drivers/power/power_core.c | 2 +- drivers/power/regulator/rk8xx.c | 2 +- drivers/power/sy8106a.c | 2 +- drivers/ram/Makefile | 2 +- drivers/ram/mediatek/ddr3-mt7629.c | 4 +- drivers/ram/rockchip/sdram_rk3188.c | 12 ++--- drivers/ram/rockchip/sdram_rk3288.c | 12 ++--- drivers/ram/rockchip/sdram_rk3399.c | 2 +- drivers/ram/rockchip/sdram_rv1126.c | 6 +-- drivers/ram/sifive/sifive_ddr.c | 6 +-- drivers/ram/starfive/Makefile | 4 +- drivers/ram/stm32mp1/stm32mp1_ram.c | 2 +- drivers/reset/reset-socfpga.c | 2 +- drivers/scsi/Makefile | 4 +- drivers/serial/Makefile | 2 +- drivers/serial/atmel_usart.c | 2 +- drivers/serial/ns16550.c | 4 +- drivers/serial/serial-uclass.c | 2 +- drivers/serial/serial.c | 2 +- drivers/serial/serial_s5p.c | 2 +- drivers/serial/serial_zynq.c | 2 +- drivers/spi/designware_spi.c | 4 +- drivers/spi/rockchip_sfc.c | 2 +- drivers/sysreset/sysreset_ast.c | 2 +- drivers/usb/cdns3/core.c | 6 +-- drivers/usb/gadget/Makefile | 4 +- drivers/usb/gadget/f_sdp.c | 10 ++--- drivers/usb/mtu3/mtu3_plat.c | 4 +- 116 files changed, 289 insertions(+), 289 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile index 1acd94f3c17..1b7db812828 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -47,7 +47,7 @@ obj-y += bus/

ifndef CONFIG_TPL_BUILD ifndef CONFIG_VPL_BUILD -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD

obj-$(CONFIG_SPL_CPU) += cpu/ obj-$(CONFIG_SPL_CRYPTO) += crypto/ @@ -80,7 +80,7 @@ obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR) += ddr/fsl/

endif

-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),)

obj-y += ata/ obj-$(CONFIG_DM_DEMO) += demo/ diff --git a/drivers/block/Makefile b/drivers/block/Makefile index fe6a1fcf486..a551591fc91 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -9,7 +9,7 @@ ifndef CONFIG_$(SPL_)BLK obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o endif

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_IDE) += ide.o obj-$(CONFIG_RKMTD) += rkmtd.o endif diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 0802b9666bf..e14cb7fd9c7 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -3,7 +3,7 @@ # Makefile for the bus drivers. #

-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),) obj-$(CONFIG_TI_PWMSS) += ti-pwmss.o obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o endif diff --git a/drivers/clk/altera/clk-agilex.c b/drivers/clk/altera/clk-agilex.c index bdc7be0fb5d..e1ddd02f356 100644 --- a/drivers/clk/altera/clk-agilex.c +++ b/drivers/clk/altera/clk-agilex.c @@ -242,7 +242,7 @@ static void clk_basic_init(struct udevice *dev, if (!cfg) return;

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Always force clock manager into boot mode before any configuration */ clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); diff --git a/drivers/clk/altera/clk-agilex5.c b/drivers/clk/altera/clk-agilex5.c index 72b923465df..716c71598bc 100644 --- a/drivers/clk/altera/clk-agilex5.c +++ b/drivers/clk/altera/clk-agilex5.c @@ -263,7 +263,7 @@ static void clk_basic_init(struct udevice *dev, clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) & ~CLKMGR_CTRL_BOOTMODE); } else { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Always force clock manager into boot mode before any configuration */ clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); diff --git a/drivers/clk/altera/clk-n5x.c b/drivers/clk/altera/clk-n5x.c index 3e256101a94..09db250ab6d 100644 --- a/drivers/clk/altera/clk-n5x.c +++ b/drivers/clk/altera/clk-n5x.c @@ -52,7 +52,7 @@ static void clk_basic_init(struct udevice *dev, if (!cfg) return;

-#if IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) /* Always force clock manager into boot mode before any configuration */ clk_write_ctrl(plat, CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c index 16169dac234..a9937c22dcb 100644 --- a/drivers/clk/clk-uclass.c +++ b/drivers/clk/clk-uclass.c @@ -378,7 +378,7 @@ int clk_set_defaults(struct udevice *dev, enum clk_defaults_stage stage) * However, still set them for SPL. And still set them if explicitly * asked. */ - if (!(IS_ENABLED(CONFIG_SPL_BUILD) || (gd->flags & GD_FLG_RELOC))) + if (!(IS_ENABLED(CONFIG_XPL_BUILD) || (gd->flags & GD_FLG_RELOC))) if (stage != CLK_DEFAULTS_POST_FORCE) return 0;

diff --git a/drivers/clk/clk_vexpress_osc.c b/drivers/clk/clk_vexpress_osc.c index 2e0e7bbe68f..85ac92c908a 100644 --- a/drivers/clk/clk_vexpress_osc.c +++ b/drivers/clk/clk_vexpress_osc.c @@ -37,7 +37,7 @@ static ulong vexpress_osc_clk_get_rate(struct clk *clk) return data; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong vexpress_osc_clk_set_rate(struct clk *clk, ulong rate) { int err; @@ -64,7 +64,7 @@ static ulong vexpress_osc_clk_set_rate(struct clk *clk, ulong rate)

static struct clk_ops vexpress_osc_clk_ops = { .get_rate = vexpress_osc_clk_get_rate, -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .set_rate = vexpress_osc_clk_set_rate, #endif }; diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c index b62b4646f4e..a8505f62bba 100644 --- a/drivers/clk/clk_zynq.c +++ b/drivers/clk/clk_zynq.c @@ -43,13 +43,13 @@

DECLARE_GLOBAL_DATA_PTR;

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD enum zynq_clk_rclk {mio_clk, emio_clk}; #endif

struct zynq_clk_priv { ulong ps_clk_freq; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD struct clk gem_emio_clk[2]; #endif }; @@ -75,7 +75,7 @@ static void *zynq_clk_get_register(enum zynq_clk id) return &slcr_base->uart_clk_ctrl; case spi0_clk ... spi1_clk: return &slcr_base->spi_clk_ctrl; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case dci_clk: return &slcr_base->dci_clk_ctrl; case gem0_clk: @@ -150,7 +150,7 @@ static ulong zynq_clk_get_pll_rate(struct zynq_clk_priv *priv, enum zynq_clk id) return priv->ps_clk_freq * mul; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static enum zynq_clk_rclk zynq_clk_get_gem_rclk(enum zynq_clk id) { u32 clk_ctrl, srcsel; @@ -199,7 +199,7 @@ static ulong zynq_clk_get_cpu_rate(struct zynq_clk_priv *priv, enum zynq_clk id) return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, pll), div); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_ddr2x_rate(struct zynq_clk_priv *priv) { u32 clk_ctrl, div; @@ -223,7 +223,7 @@ static ulong zynq_clk_get_ddr3x_rate(struct zynq_clk_priv *priv) return DIV_ROUND_CLOSEST(zynq_clk_get_pll_rate(priv, ddrpll_clk), div); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_dci_rate(struct zynq_clk_priv *priv) { u32 clk_ctrl, div0, div1; @@ -251,7 +251,7 @@ static ulong zynq_clk_get_peripheral_rate(struct zynq_clk_priv *priv, if (!div0) div0 = 1;

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (two_divs) { div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT; if (!div1) @@ -268,7 +268,7 @@ static ulong zynq_clk_get_peripheral_rate(struct zynq_clk_priv *priv, div1); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_gem_rate(struct zynq_clk_priv *priv, enum zynq_clk id) { struct clk *parent; @@ -366,7 +366,7 @@ static ulong zynq_clk_set_gem_rate(struct zynq_clk_priv *priv, enum zynq_clk id, } #endif

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong zynq_clk_get_rate(struct clk *clk) { struct zynq_clk_priv *priv = dev_get_priv(clk->dev); @@ -502,7 +502,7 @@ static void zynq_clk_dump(struct udevice *dev)

static struct clk_ops zynq_clk_ops = { .get_rate = zynq_clk_get_rate, -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .set_rate = zynq_clk_set_rate, #endif .enable = dummy_enable, @@ -514,7 +514,7 @@ static struct clk_ops zynq_clk_ops = { static int zynq_clk_probe(struct udevice *dev) { struct zynq_clk_priv *priv = dev_get_priv(dev); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD unsigned int i; char name[16]; int ret; diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c index a91c6767fac..bb6958f0ec2 100644 --- a/drivers/clk/imx/clk-imx8mm.c +++ b/drivers/clk/imx/clk-imx8mm.c @@ -31,7 +31,7 @@ static const char * const imx8mm_ahb_sels[] = {"clock-osc-24m", "sys_pll1_133m", "sys_pll1_400m", "sys_pll2_125m", "sys_pll3_out", "audio_pll1_out", "video_pll1_out", };

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mm_enet_axi_sels[] = {"clock-osc-24m", "sys_pll1_266m", "sys_pll1_800m", "sys_pll2_250m", "sys_pll2_200m", "audio_pll1_out", "video_pll1_out", "sys_pll3_out", }; @@ -95,7 +95,7 @@ static const char * const imx8mm_pcie1_aux_sels[] = {"clock-osc-24m", "sys_pll2_ "sys_pll1_160m", "sys_pll1_200m", }; #endif

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mm_pwm1_sels[] = {"clock-osc-24m", "sys_pll2_100m", "sys_pll1_160m", "sys_pll1_40m", "sys_pll3_out", "clk_ext1", "sys_pll1_80m", "video_pll1_out", }; @@ -357,7 +357,7 @@ static int imx8mm_clk_probe(struct udevice *dev) imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0));

/* clks not needed in SPL stage */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD clk_dm(IMX8MM_CLK_ENET_AXI, imx8m_clk_composite("enet_axi", imx8mm_enet_axi_sels, base + 0x8880)); diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c index 125215e84f4..be15ebd0e25 100644 --- a/drivers/clk/imx/clk-imx8mn.c +++ b/drivers/clk/imx/clk-imx8mn.c @@ -37,7 +37,7 @@ static const char * const imx8mn_enet_axi_sels[] = {"clock-osc-24m", "sys_pll1_2 "sys_pll2_250m", "sys_pll2_200m", "audio_pll1_out", "video_pll_out", "sys_pll3_out", };

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mn_enet_ref_sels[] = {"clock-osc-24m", "sys_pll2_125m", "sys_pll2_50m", "sys_pll2_100m", "sys_pll1_160m", "audio_pll1_out", "video_pll_out", "clk_ext4", }; @@ -97,7 +97,7 @@ static const char * const imx8mn_i2c4_sels[] = {"clock-osc-24m", "sys_pll1_160m" "sys_pll3_out", "audio_pll1_out", "video_pll_out", "audio_pll2_out", "sys_pll1_133m", };

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static const char * const imx8mn_pwm1_sels[] = {"clock-osc-24m", "sys_pll2_100m", "sys_pll1_160m", "sys_pll1_40m", "sys_pll3_out", "clk_ext1", "sys_pll1_80m", "video_pll_out", }; @@ -359,7 +359,7 @@ static int imx8mn_clk_probe(struct udevice *dev) imx_clk_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0));

/* clks not needed in SPL stage */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD clk_dm(IMX8MN_CLK_ENET_REF, imx8m_clk_composite("enet_ref", imx8mn_enet_ref_sels, base + 0xa980)); diff --git a/drivers/clk/imx/clk-imxrt1020.c b/drivers/clk/imx/clk-imxrt1020.c index c80b02975aa..752434cb0ad 100644 --- a/drivers/clk/imx/clk-imxrt1020.c +++ b/drivers/clk/imx/clk-imxrt1020.c @@ -124,7 +124,7 @@ static int imxrt1020_clk_probe(struct udevice *dev) clk_dm(IMXRT1020_CLK_SEMC, imx_clk_gate2("semc", "semc_podf", base + 0x74, 4));

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct clk *clk, *clk1;

clk_get_by_id(IMXRT1020_CLK_SEMC_SEL, &clk1); diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c index 754f3948427..788e0650a92 100644 --- a/drivers/clk/imx/clk-imxrt1050.c +++ b/drivers/clk/imx/clk-imxrt1050.c @@ -180,7 +180,7 @@ static int imxrt1050_clk_probe(struct udevice *dev)

struct clk *clk, *clk1;

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* bypass pll1 before setting its rate */ clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk); clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1); diff --git a/drivers/clk/rockchip/clk_px30.c b/drivers/clk/rockchip/clk_px30.c index d7825c66493..22ede1c38a8 100644 --- a/drivers/clk/rockchip/clk_px30.c +++ b/drivers/clk/rockchip/clk_px30.c @@ -989,7 +989,7 @@ static ulong px30_peri_set_clk(struct px30_clk_priv *priv, ulong clk_id, return px30_peri_get_clk(priv, clk_id); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong px30_crypto_get_clk(struct px30_clk_priv *priv, ulong clk_id) { struct px30_cru *cru = priv->cru; @@ -1261,7 +1261,7 @@ static ulong px30_clk_get_rate(struct clk *clk) case HCLK_PERI_PRE: rate = px30_peri_get_clk(priv, clk->id); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case SCLK_CRYPTO: case SCLK_CRYPTO_APK: rate = px30_crypto_get_clk(priv, clk->id); @@ -1345,7 +1345,7 @@ static ulong px30_clk_set_rate(struct clk *clk, ulong rate) case HCLK_PERI_PRE: ret = px30_peri_set_clk(priv, clk->id, rate); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case SCLK_CRYPTO: case SCLK_CRYPTO_APK: ret = px30_crypto_set_clk(priv, clk->id, rate); diff --git a/drivers/clk/rockchip/clk_rk3188.c b/drivers/clk/rockchip/clk_rk3188.c index f569a100f22..d8b03e1d7ab 100644 --- a/drivers/clk/rockchip/clk_rk3188.c +++ b/drivers/clk/rockchip/clk_rk3188.c @@ -80,7 +80,7 @@ enum { "divisors on line " __stringify(__LINE__));

/* Keep divisors as low as possible to reduce jitter and power usage */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2); static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2); #endif @@ -371,7 +371,7 @@ static ulong rockchip_spi_set_clk(struct rk3188_cru *cru, uint gclk_rate, return rockchip_spi_get_clk(cru, gclk_rate, periph); }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf, bool has_bwadj) { @@ -557,7 +557,7 @@ static int rk3188_clk_probe(struct udevice *dev) return PTR_ERR(priv->grf); priv->has_bwadj = (type == RK3188A_CRU) ? 1 : 0;

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #if CONFIG_IS_ENABLED(OF_PLATDATA) struct rk3188_clk_plat *plat = dev_get_plat(dev);

diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c index 432a79291c8..43c44fadbe7 100644 --- a/drivers/clk/rockchip/clk_rk3288.c +++ b/drivers/clk/rockchip/clk_rk3288.c @@ -223,7 +223,7 @@ static int rkclk_configure_ddr(struct rockchip_cru *cru, struct rk3288_grf *grf, return 0; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define VCO_MAX_KHZ 2200000 #define VCO_MIN_KHZ 440000 #define FREF_MAX_KHZ 2200000 @@ -421,7 +421,7 @@ static ulong rockchip_i2s_set_clk(struct rockchip_cru *cru, uint gclk_rate,

return rockchip_i2s_get_clk(cru, gclk_rate); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

static void rkclk_init(struct rockchip_cru *cru, struct rk3288_grf *grf) { @@ -819,7 +819,7 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate) case SCLK_SPI2: new_rate = rockchip_spi_set_clk(cru, gclk_rate, clk->id, rate); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case SCLK_I2S0: new_rate = rockchip_i2s_set_clk(cru, gclk_rate, rate); break; @@ -973,7 +973,7 @@ static int rk3288_clk_probe(struct udevice *dev) priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); if (IS_ERR(priv->grf)) return PTR_ERR(priv->grf); -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #if CONFIG_IS_ENABLED(OF_PLATDATA) struct rk3288_clk_plat *plat = dev_get_plat(dev);

diff --git a/drivers/clk/rockchip/clk_rk3328.c b/drivers/clk/rockchip/clk_rk3328.c index 9137dbe69ce..7701a9734ee 100644 --- a/drivers/clk/rockchip/clk_rk3328.c +++ b/drivers/clk/rockchip/clk_rk3328.c @@ -582,7 +582,7 @@ static ulong rk3328_spi_set_clk(struct rk3328_cru *cru, uint hz) return rk3328_spi_get_clk(cru); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3328_vop_get_clk(struct rk3328_clk_priv *priv, ulong clk_id) { struct rk3328_cru *cru = priv->cru; @@ -746,7 +746,7 @@ static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate) case SCLK_SPI: ret = rk3328_spi_set_clk(priv->cru, rate); break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case DCLK_LCDC: case ACLK_VOP_PRE: case ACLK_VIO_PRE: diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c index d8943980521..630253fbb1d 100644 --- a/drivers/clk/rockchip/clk_rk3368.c +++ b/drivers/clk/rockchip/clk_rk3368.c @@ -50,7 +50,7 @@ struct pll_div { (_nr * _no) == hz, #hz "Hz cannot be hit with PLL " \ "divisors on line " __stringify(__LINE__));

-#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static const struct pll_div apll_l_init_cfg = PLL_DIVISORS(APLL_L_HZ, 12, 2); static const struct pll_div apll_b_init_cfg = PLL_DIVISORS(APLL_B_HZ, 1, 2); #if !defined(CONFIG_TPL_BUILD) @@ -88,7 +88,7 @@ static uint32_t rkclk_pll_get_rate(struct rk3368_cru *cru, } }

-#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, const struct pll_div *div) { @@ -130,7 +130,7 @@ static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id, } #endif

-#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) static void rkclk_init(struct rk3368_cru *cru) { u32 apllb, aplll, dpll, cpll, gpll; @@ -157,7 +157,7 @@ static void rkclk_init(struct rk3368_cru *cru) } #endif

-#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC) +#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC) static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id) { u32 div, con, con_id, rate; @@ -469,7 +469,7 @@ static ulong rk3368_clk_get_rate(struct clk *clk) case SCLK_SPI0 ... SCLK_SPI2: rate = rk3368_spi_get_clk(priv->cru, clk->id); break; -#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC) +#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC) case HCLK_SDMMC: case HCLK_EMMC: rate = rk3368_mmc_get_clk(priv->cru, clk->id); @@ -500,7 +500,7 @@ static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate) ret = rk3368_ddr_set_clk(priv->cru, rate); break; #endif -#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC) +#if !IS_ENABLED(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(MMC) case HCLK_SDMMC: case HCLK_EMMC: ret = rk3368_mmc_set_clk(clk, rate); @@ -586,7 +586,7 @@ static int rk3368_clk_probe(struct udevice *dev)

priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); #endif -#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) +#if IS_ENABLED(CONFIG_XPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD) rkclk_init(priv->cru); #endif

diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 89924041299..155ea8d6353 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -56,7 +56,7 @@ struct pll_div {

static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1); static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2); -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1); #endif

@@ -1464,7 +1464,7 @@ static int rk3399_clk_probe(struct udevice *dev) priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); #endif

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) init_clocks = true; #elif CONFIG_IS_ENABLED(HANDOFF) if (!(gd->flags & GD_FLG_RELOC)) { @@ -1658,7 +1658,7 @@ static struct clk_ops rk3399_pmuclk_ops = { .set_rate = rk3399_pmuclk_set_rate, };

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static void pmuclk_init(struct rk3399_pmucru *pmucru) { u32 pclk_div; @@ -1676,7 +1676,7 @@ static void pmuclk_init(struct rk3399_pmucru *pmucru)

static int rk3399_pmuclk_probe(struct udevice *dev) { -#if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(OF_PLATDATA) || !defined(CONFIG_XPL_BUILD) struct rk3399_pmuclk_priv *priv = dev_get_priv(dev); #endif

@@ -1686,7 +1686,7 @@ static int rk3399_pmuclk_probe(struct udevice *dev) priv->pmucru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); #endif

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD pmuclk_init(priv->pmucru); #endif return 0; diff --git a/drivers/clk/rockchip/clk_rk3568.c b/drivers/clk/rockchip/clk_rk3568.c index 35563509d61..977699d509d 100644 --- a/drivers/clk/rockchip/clk_rk3568.c +++ b/drivers/clk/rockchip/clk_rk3568.c @@ -91,7 +91,7 @@ static struct rockchip_pll_clock rk3568_pll_clks[] = { RK3568_PMU_MODE, 2, 10, 0, rk3568_pll_rates), };

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3568_pmu_pll_set_rate(struct rk3568_clk_priv *priv, ulong pll_id, ulong rate) @@ -1707,7 +1707,7 @@ static ulong rk3568_emmc_set_bclk(struct rk3568_clk_priv *priv, ulong rate) return rk3568_emmc_get_bclk(priv); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3568_aclk_vop_get_clk(struct rk3568_clk_priv *priv) { struct rk3568_cru *cru = priv->cru; @@ -2413,7 +2413,7 @@ static ulong rk3568_clk_get_rate(struct clk *clk) case TCLK_EMMC: rate = OSC_HZ; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case ACLK_VOP: rate = rk3568_aclk_vop_get_clk(priv); break; @@ -2594,7 +2594,7 @@ static ulong rk3568_clk_set_rate(struct clk *clk, ulong rate) case TCLK_EMMC: ret = OSC_HZ; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case ACLK_VOP: ret = rk3568_aclk_vop_set_clk(priv, rate); break; @@ -2894,7 +2894,7 @@ static void rk3568_clk_init(struct rk3568_clk_priv *priv) priv->gpll_hz = GPLL_HZ; }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD ret = rk3568_bus_set_clk(priv, ACLK_BUS, 150000000); if (ret < 0) printf("Fail to set the ACLK_BUS clock.\n"); diff --git a/drivers/clk/rockchip/clk_rk3588.c b/drivers/clk/rockchip/clk_rk3588.c index db1384dacd2..6042fc10cdb 100644 --- a/drivers/clk/rockchip/clk_rk3588.c +++ b/drivers/clk/rockchip/clk_rk3588.c @@ -65,7 +65,7 @@ static struct rockchip_pll_clock rk3588_pll_clks[] = { RK3588_MODE_CON0, 0, 15, 0, rk3588_pll_rates), [PPLL] = PLL(pll_rk3588, PLL_PPLL, RK3588_PMU_PLL_CON(128), RK3588_MODE_CON0, 10, 15, 0, rk3588_pll_rates), -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * The SPLL is part of the SBUSCRU, not the main CRU and as * such only directly accessible during the SPL stage. @@ -76,7 +76,7 @@ static struct rockchip_pll_clock rk3588_pll_clks[] = {

};

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * * rational_best_approximation(31415, 10000, @@ -875,7 +875,7 @@ static ulong rk3588_mmc_set_clk(struct rk3588_clk_priv *priv, return rk3588_mmc_get_clk(priv, clk_id); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static ulong rk3588_aux16m_get_clk(struct rk3588_clk_priv *priv, ulong clk_id) { struct rk3588_cru *cru = priv->cru; @@ -1600,7 +1600,7 @@ static ulong rk3588_clk_get_rate(struct clk *clk) case CLK_GPU: rate = 200000000; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case CLK_AUX16M_0: case CLK_AUX16M_1: rate = rk3588_aux16m_get_clk(priv, clk->id); @@ -1760,7 +1760,7 @@ static ulong rk3588_clk_set_rate(struct clk *clk, ulong rate) case CLK_150M_SRC: ret = 0; break; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD case CLK_AUX16M_0: case CLK_AUX16M_1: ret = rk3588_aux16m_set_clk(priv, clk->id, rate); @@ -1965,7 +1965,7 @@ static int rk3588_clk_probe(struct udevice *dev)

priv->sync_kernel = false;

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD rockchip_pll_set_rate(&rk3588_pll_clks[B0PLL], priv->cru, B0PLL, LPLL_HZ); rockchip_pll_set_rate(&rk3588_pll_clks[B1PLL], priv->cru, @@ -2051,7 +2051,7 @@ U_BOOT_DRIVER(rockchip_rk3588_cru) = { .probe = rk3588_clk_probe, };

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define SCRU_BASE 0xfd7d0000 #define SBUSCRU_BASE 0xfd7d8000

diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c index aa26d3a109b..de55504b5c9 100644 --- a/drivers/clk/sifive/sifive-prci.c +++ b/drivers/clk/sifive/sifive-prci.c @@ -670,7 +670,7 @@ static int sifive_prci_probe(struct udevice *dev) __prci_wrpll_read_cfg0(pd, pc->pwd); }

- if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { if (device_is_compatible(dev, "sifive,fu740-c000-prci")) { u32 prci_pll_reg; unsigned long parent_rate; diff --git a/drivers/clk/starfive/clk-jh7110-pll.c b/drivers/clk/starfive/clk-jh7110-pll.c index 581035842fc..6d2bfb3ecb7 100644 --- a/drivers/clk/starfive/clk-jh7110-pll.c +++ b/drivers/clk/starfive/clk-jh7110-pll.c @@ -348,10 +348,10 @@ struct clk *starfive_jh7110_pll(const char *name, const char *parent_name, return ERR_PTR(ret); }

- if (IS_ENABLED(CONFIG_SPL_BUILD) && pll->type == PLL0) + if (IS_ENABLED(CONFIG_XPL_BUILD) && pll->type == PLL0) jh7110_pllx_set_rate(clk, 1000000000);

- if (IS_ENABLED(CONFIG_SPL_BUILD) && pll->type == PLL2) + if (IS_ENABLED(CONFIG_XPL_BUILD) && pll->type == PLL2) jh7110_pllx_set_rate(clk, 1188000000);

return clk; diff --git a/drivers/clk/stm32/clk-stm32mp1.c b/drivers/clk/stm32/clk-stm32mp1.c index 204ac170531..4044edfb768 100644 --- a/drivers/clk/stm32/clk-stm32mp1.c +++ b/drivers/clk/stm32/clk-stm32mp1.c @@ -26,7 +26,7 @@

DECLARE_GLOBAL_DATA_PTR;

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) /* activate clock tree initialization in the driver */ #define STM32MP1_CLOCK_TREE_INIT #endif @@ -2279,7 +2279,7 @@ static int stm32mp1_clk_probe(struct udevice *dev) dev_err(dev, "clock tree initialization failed (%d)\n", result); #endif

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if defined(VERBOSE_DEBUG) /* display debug information for probe after relocation */ if (gd->flags & GD_FLG_RELOC) @@ -2314,7 +2314,7 @@ static const struct clk_ops stm32mp1_clk_ops = { .disable = stm32mp1_clk_disable, .get_rate = stm32mp1_clk_get_rate, .set_rate = stm32mp1_clk_set_rate, -#if IS_ENABLED(CONFIG_CMD_CLK) && !IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_CMD_CLK) && !IS_ENABLED(CONFIG_XPL_BUILD) .dump = stm32mp1_clk_dump, #endif }; diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c index 7e3b3719d18..129b34a5cd2 100644 --- a/drivers/core/ofnode.c +++ b/drivers/core/ofnode.c @@ -611,7 +611,7 @@ int ofnode_read_u32_array(ofnode node, const char *propname, out_values, sz);

/* get the error right, but space is more important in SPL */ - if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { if (ret == -FDT_ERR_NOTFOUND) return -EINVAL; else if (ret == -FDT_ERR_BADLAYOUT) @@ -1468,7 +1468,7 @@ int ofnode_read_simple_size_cells(ofnode node)

bool ofnode_pre_reloc(ofnode node) { -#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_TPL_BUILD) +#if defined(CONFIG_XPL_BUILD) || defined(CONFIG_TPL_BUILD) /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass * had property bootph-all or bootph-pre-sram/bootph-pre-ram. * They are removed in final dtb (fdtgrep 2nd pass) diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c index 55191736931..9c4ff4960fc 100644 --- a/drivers/crypto/fsl/jobdesc.c +++ b/drivers/crypto/fsl/jobdesc.c @@ -207,7 +207,7 @@ void inline_cnstr_jobdesc_hash(uint32_t *desc, append_store(desc, dma_addr_out, storelen, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD void inline_cnstr_jobdesc_blob_encap(uint32_t *desc, uint8_t *key_idnfr, uint8_t *plain_txt, uint8_t *enc_blob, uint32_t in_sz) diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c index 27e24808946..c45481bef0b 100644 --- a/drivers/crypto/fsl/jr.c +++ b/drivers/crypto/fsl/jr.c @@ -713,7 +713,7 @@ int sec_init_idx(uint8_t sec_idx)

ccsr_sec_t *sec = caam->sec; uint32_t mcr = sec_in32(&sec->mcfgr); -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX8M) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_IMX8M) uint32_t jrdid_ms = 0; #endif #ifdef CONFIG_FSL_CORENET @@ -745,14 +745,14 @@ int sec_init_idx(uint8_t sec_idx) mcr |= (1 << MCFGR_PS_SHIFT); #endif sec_out32(&sec->mcfgr, mcr); -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_IMX8M) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_IMX8M) jrdid_ms = JRDID_MS_TZ_OWN | JRDID_MS_PRIM_TZ | JRDID_MS_PRIM_DID; sec_out32(&sec->jrliodnr[caam->jrid].ms, jrdid_ms); #endif jr_reset();

#ifdef CONFIG_FSL_CORENET -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * For SPL Build, Set the Liodns in SEC JR0 for * creating PAMU entries corresponding to these. diff --git a/drivers/ddr/altera/sdram_gen5.c b/drivers/ddr/altera/sdram_gen5.c index 46c53e7c7a3..3c79bb11802 100644 --- a/drivers/ddr/altera/sdram_gen5.c +++ b/drivers/ddr/altera/sdram_gen5.c @@ -20,7 +20,7 @@

#include "sequencer.h"

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

struct altera_gen5_sdram_priv { struct ram_info info; @@ -651,4 +651,4 @@ U_BOOT_DRIVER(altera_gen5_sdram) = { .priv_auto = sizeof(struct altera_gen5_sdram_priv), };

-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c index cc128112e4f..9c5b108267a 100644 --- a/drivers/ddr/fsl/lc_common_dimm_params.c +++ b/drivers/ddr/fsl/lc_common_dimm_params.c @@ -409,18 +409,18 @@ compute_lowest_common_dimm_parameters(const unsigned int ctrl_num, if (dimm_params[i].n_ranks) { if (dimm_params[i].registered_dimm) { temp1 = 1; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("Detected RDIMM %s\n", dimm_params[i].mpart); #endif } else { temp2 = 1; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("Detected UDIMM %s\n", dimm_params[i].mpart); #endif } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); #endif } diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index 888dfb7ff33..d59e94779ff 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -863,16 +863,16 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) if ((first_ctrl == 0) && (total_memory - 1 > (phys_size_t)~0ULL)) { puts("Detected "); print_size(total_memory, " of memory\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); /* re-align to match init_dram print */ #endif puts("This U-Boot only supports <= "); print_size((unsigned long long)((phys_size_t)~0ULL)+1, " of DDR\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); /* re-align to match init_dram print */ #endif puts("You could rebuild it with CONFIG_PHYS_64BIT\n"); -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD puts(" "); /* re-align to match init_dram print */ #endif } diff --git a/drivers/ddr/imx/imx8m/Makefile b/drivers/ddr/imx/imx8m/Makefile index aed91dc23f4..883e6e1b0d7 100644 --- a/drivers/ddr/imx/imx8m/Makefile +++ b/drivers/ddr/imx/imx8m/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX8M_DRAM) += ddr_init.o obj-y += ../phy/ endif diff --git a/drivers/ddr/imx/imx8ulp/Makefile b/drivers/ddr/imx/imx8ulp/Makefile index 7f44a92180f..4f2ad32351c 100644 --- a/drivers/ddr/imx/imx8ulp/Makefile +++ b/drivers/ddr/imx/imx8ulp/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ #

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX8ULP_DRAM) += ddr_init.o endif diff --git a/drivers/ddr/imx/imx9/Makefile b/drivers/ddr/imx/imx9/Makefile index 9403f988b32..6c9506055b8 100644 --- a/drivers/ddr/imx/imx9/Makefile +++ b/drivers/ddr/imx/imx9/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX9_DRAM) += ddr_init.o obj-y += ../phy/ endif diff --git a/drivers/ddr/imx/phy/Makefile b/drivers/ddr/imx/phy/Makefile index bb3d4ee5b74..592d0c6ebad 100644 --- a/drivers/ddr/imx/phy/Makefile +++ b/drivers/ddr/imx/phy/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ #

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_IMX_SNPS_DDR_PHY) += helper.o ddrphy_utils.o ddrphy_train.o ddrphy_csr.o endif diff --git a/drivers/ddr/marvell/a38x/Makefile b/drivers/ddr/marvell/a38x/Makefile index 4e8a9d190d7..f49d009920e 100644 --- a/drivers/ddr/marvell/a38x/Makefile +++ b/drivers/ddr/marvell/a38x/Makefile @@ -1,29 +1,29 @@ # SPDX-License-Identifier: GPL-2.0+

-obj-$(CONFIG_SPL_BUILD) += mv_ddr_plat.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_sys_env_lib.o -obj-$(CONFIG_SPL_BUILD) += ddr3_debug.o -obj-$(CONFIG_SPL_BUILD) += ddr3_init.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_bist.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_centralization.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_db.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_hw_algo.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_ip_engine.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_leveling.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_pbs.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_build_message.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_common.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_spd.o -obj-$(CONFIG_SPL_BUILD) += mv_ddr_topology.o -obj-$(CONFIG_SPL_BUILD) += xor.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_plat.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_sys_env_lib.o +obj-$(CONFIG_XPL_BUILD) += ddr3_debug.o +obj-$(CONFIG_XPL_BUILD) += ddr3_init.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_bist.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_centralization.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_db.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_hw_algo.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_ip_engine.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_leveling.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_pbs.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_build_message.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_common.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_spd.o +obj-$(CONFIG_XPL_BUILD) += mv_ddr_topology.o +obj-$(CONFIG_XPL_BUILD) += xor.o

obj-$(CONFIG_ARMADA_38X_SUPPORT_OLD_DDR3_TRAINING) += old/

ifdef CONFIG_DDR4 - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_mpr_pda_if.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_calibration.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_db.o - obj-$(CONFIG_SPL_BUILD) += mv_ddr4_training_leveling.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_mpr_pda_if.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training_calibration.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training_db.o + obj-$(CONFIG_XPL_BUILD) += mv_ddr4_training_leveling.o endif diff --git a/drivers/ddr/marvell/a38x/old/Makefile b/drivers/ddr/marvell/a38x/old/Makefile index 1645a79b405..c9bc746cc2b 100644 --- a/drivers/ddr/marvell/a38x/old/Makefile +++ b/drivers/ddr/marvell/a38x/old/Makefile @@ -2,20 +2,20 @@ # SPDX-License-Identifier: GPL-2.0+ #

-obj-$(CONFIG_SPL_BUILD) += ddr3_a38x.o -obj-$(CONFIG_SPL_BUILD) += ddr3_a38x_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_debug.o -obj-$(CONFIG_SPL_BUILD) += ddr3_hws_hw_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_init.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_bist.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_centralization.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_db.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_hw_algo.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_ip_engine.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_leveling.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_pbs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_training_static.o +obj-$(CONFIG_XPL_BUILD) += ddr3_a38x.o +obj-$(CONFIG_XPL_BUILD) += ddr3_a38x_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_debug.o +obj-$(CONFIG_XPL_BUILD) += ddr3_hws_hw_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_init.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_bist.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_centralization.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_db.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_hw_algo.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_ip_engine.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_leveling.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_pbs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_training_static.o

define IncludeSymbolRename CFLAGS_$(1) = -include $(srctree)/drivers/ddr/marvell/a38x/old/glue_symbol_renames.h diff --git a/drivers/ddr/marvell/axp/Makefile b/drivers/ddr/marvell/axp/Makefile index d04d9a21db2..01e427296e6 100644 --- a/drivers/ddr/marvell/axp/Makefile +++ b/drivers/ddr/marvell/axp/Makefile @@ -1,12 +1,12 @@ # SPDX-License-Identifier: GPL-2.0+

-obj-$(CONFIG_SPL_BUILD) += ddr3_dfs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_dqs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_hw_training.o -obj-$(CONFIG_SPL_BUILD) += ddr3_init.o -obj-$(CONFIG_SPL_BUILD) += ddr3_pbs.o -obj-$(CONFIG_SPL_BUILD) += ddr3_read_leveling.o -obj-$(CONFIG_SPL_BUILD) += ddr3_sdram.o -obj-$(CONFIG_SPL_BUILD) += ddr3_spd.o -obj-$(CONFIG_SPL_BUILD) += ddr3_write_leveling.o -obj-$(CONFIG_SPL_BUILD) += xor.o +obj-$(CONFIG_XPL_BUILD) += ddr3_dfs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_dqs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_hw_training.o +obj-$(CONFIG_XPL_BUILD) += ddr3_init.o +obj-$(CONFIG_XPL_BUILD) += ddr3_pbs.o +obj-$(CONFIG_XPL_BUILD) += ddr3_read_leveling.o +obj-$(CONFIG_XPL_BUILD) += ddr3_sdram.o +obj-$(CONFIG_XPL_BUILD) += ddr3_spd.o +obj-$(CONFIG_XPL_BUILD) += ddr3_write_leveling.o +obj-$(CONFIG_XPL_BUILD) += xor.o diff --git a/drivers/firmware/firmware-zynqmp.c b/drivers/firmware/firmware-zynqmp.c index f99507d86c6..4b1b80d7abe 100644 --- a/drivers/firmware/firmware-zynqmp.c +++ b/drivers/firmware/firmware-zynqmp.c @@ -260,7 +260,7 @@ int zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) int err; u32 ret_payload[PAYLOAD_ARG_CNT];

- if (IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_XPL_BUILD)) printf("Loading new PMUFW cfg obj (%ld bytes)\n", size);

flush_dcache_range((ulong)cfg_obj, (ulong)(cfg_obj + size)); @@ -282,7 +282,7 @@ int zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) if (ret_payload[0]) printf("PMUFW returned 0x%08x status!\n", ret_payload[0]);

- if ((err || ret_payload[0]) && IS_ENABLED(CONFIG_SPL_BUILD)) + if ((err || ret_payload[0]) && IS_ENABLED(CONFIG_XPL_BUILD)) panic("PMUFW config object loading failed in EL3\n");

return 0; @@ -354,7 +354,7 @@ int __maybe_unused xilinx_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, debug("%s at EL%d, API ID: 0x%0x, 0x%0x, 0x%0x, 0x%0x, 0x%0x\n", __func__, current_el(), api_id, arg0, arg1, arg2, arg3);

- if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { #if defined(CONFIG_ZYNQMP_IPI) /* * Use fixed payload and arg size as the EL2 call. The firmware @@ -416,10 +416,10 @@ static int zynqmp_firmware_bind(struct udevice *dev) int ret; struct udevice *child;

- if ((IS_ENABLED(CONFIG_SPL_BUILD) && + if ((IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_POWER_DOMAIN) && IS_ENABLED(CONFIG_ZYNQMP_POWER_DOMAIN)) || - (!IS_ENABLED(CONFIG_SPL_BUILD) && + (!IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_ZYNQMP_POWER_DOMAIN))) { ret = device_bind_driver_to_node(dev, "zynqmp_power_domain", "zynqmp_power_domain", diff --git a/drivers/fpga/intel_sdm_mb.c b/drivers/fpga/intel_sdm_mb.c index 45caef4f5c1..5a65bd98779 100644 --- a/drivers/fpga/intel_sdm_mb.c +++ b/drivers/fpga/intel_sdm_mb.c @@ -17,7 +17,7 @@ #define RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS 60000 #define RECONFIG_STATUS_INTERVAL_DELAY_US 1000000

-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF)

#define BITSTREAM_CHUNK_SIZE 0xFFFF0 #define RECONFIG_STATUS_POLL_RETRY_MAX 100 diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c index 57467b4d975..3e86d854a01 100644 --- a/drivers/fpga/zynqpl.c +++ b/drivers/fpga/zynqpl.c @@ -414,13 +414,13 @@ static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize, if (bstype != BIT_PARTIAL) zynq_slcr_devcfg_enable();

- if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) puts("INFO:post config was not run, please run manually if needed\n");

return FPGA_SUCCESS; }

-#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_XPL_BUILD) static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize, fpga_fs_info *fsinfo) { @@ -504,7 +504,7 @@ static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,

struct xilinx_fpga_op zynq_op = { .load = zynq_load, -#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_XPL_BUILD) .loadfs = zynq_loadfs, #endif }; diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index da0faf05246..990a670dd7b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -3,7 +3,7 @@ # Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_DWAPB_GPIO) += dwapb_gpio.o obj-$(CONFIG_AXP_GPIO) += axp_gpio.o obj-$(CONFIG_DM_74X164) += 74x164_gpio.o diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index 92ce68dd4a1..0213271e3a6 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -412,7 +412,7 @@ int dm_gpio_request(struct gpio_desc *desc, const char *label)

static int dm_gpio_requestf(struct gpio_desc *desc, const char *fmt, ...) { -#if !defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) +#if !defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) va_list args; char buf[40];

@@ -461,7 +461,7 @@ int gpio_request(unsigned gpio, const char *label) */ int gpio_requestf(unsigned gpio, const char *fmt, ...) { -#if !defined(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) +#if !defined(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(USE_TINY_PRINTF) va_list args; char buf[40];

diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index fc4dcf9f986..2fb14590c0f 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -143,7 +143,7 @@ int pca953x_get_val(uint8_t chip) return (int)val; }

-#if defined(CONFIG_CMD_PCA953X) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_PCA953X) && !defined(CONFIG_XPL_BUILD) /* * Display pca953x information */ diff --git a/drivers/gpio/rk_gpio.c b/drivers/gpio/rk_gpio.c index 24ba12dd820..57c49c75939 100644 --- a/drivers/gpio/rk_gpio.c +++ b/drivers/gpio/rk_gpio.c @@ -126,7 +126,7 @@ static int rockchip_gpio_get_function(struct udevice *dev, unsigned offset) }

/* Simple SPL interface to GPIOs */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD

enum { PULL_NONE_1V8 = 0, @@ -169,7 +169,7 @@ int spl_gpio_output(void *vregs, uint gpio, int value)

return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

static int rockchip_gpio_probe(struct udevice *dev) { diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index 83e65aa4aec..53dbbe97b5a 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -92,7 +92,7 @@ static void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en) writel(value, &bank->dat); }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* Common GPIO API - SPL does not support driver model yet */ int gpio_set_value(unsigned gpio, int value) { @@ -118,7 +118,7 @@ static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio) value = readl(&bank->dat); return !!(value & DAT_MASK(gpio)); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

static void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode) { @@ -185,7 +185,7 @@ int s5p_gpio_get_pin(unsigned gpio) }

/* Driver model interface */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* set GPIO pin 'gpio' as an input */ static int exynos_gpio_direction_input(struct udevice *dev, unsigned offset) { @@ -230,7 +230,7 @@ static int exynos_gpio_set_value(struct udevice *dev, unsigned offset,

return 0; } -#endif /* nCONFIG_SPL_BUILD */ +#endif /* nCONFIG_XPL_BUILD */

/* * There is no common GPIO API for pull, drv, pin, rate (yet). These @@ -260,7 +260,7 @@ void gpio_set_rate(int gpio, int mode) s5p_gpio_get_pin(gpio), mode); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int exynos_gpio_get_function(struct udevice *dev, unsigned offset) { struct exynos_bank_info *state = dev_get_priv(dev); diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index 218ca2af397..2ca4960f17a 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -245,7 +245,7 @@ int sunxi_name_to_gpio(const char *name) { unsigned int gpio; int ret; -#if !defined CONFIG_SPL_BUILD && defined CONFIG_AXP_GPIO +#if !defined CONFIG_XPL_BUILD && defined CONFIG_AXP_GPIO char lookup[8];

if (strcasecmp(name, "AXP0-VBUS-ENABLE") == 0) { diff --git a/drivers/gpio/tca642x.c b/drivers/gpio/tca642x.c index 1d45b500746..8307a07e14e 100644 --- a/drivers/gpio/tca642x.c +++ b/drivers/gpio/tca642x.c @@ -164,7 +164,7 @@ int tca642x_set_inital_state(uchar chip, struct tca642x_bank_info init_data[]) return ret; }

-#if defined(CONFIG_CMD_TCA642X) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_TCA642X) && !defined(CONFIG_XPL_BUILD) /* * Display tca642x information */ diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c index 0c40d36c41e..6cafffaad92 100644 --- a/drivers/gpio/tegra_gpio.c +++ b/drivers/gpio/tegra_gpio.c @@ -323,7 +323,7 @@ static int gpio_tegra_bind(struct udevice *parent) return 0;

/* TODO(sjg@chromium.org): Remove once SPL supports device tree */ -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE; bank_count = TEGRA_GPIO_BANKS; #else diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 71f315adf6f..3e855346bce 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += key_matrix.o obj-$(CONFIG_$(SPL_TPL_)DM_KEYBOARD) += input.o keyboard-uclass.o obj-$(CONFIG_BUTTON_KEYBOARD) += button_kbd.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD

obj-$(CONFIG_APPLE_SPI_KEYB) += apple_spi_kbd.o obj-$(CONFIG_I8042_KEYB) += i8042.o diff --git a/drivers/mailbox/zynqmp-ipi.c b/drivers/mailbox/zynqmp-ipi.c index 4df69734ed9..713d93a200c 100644 --- a/drivers/mailbox/zynqmp-ipi.c +++ b/drivers/mailbox/zynqmp-ipi.c @@ -108,7 +108,7 @@ static int zynqmp_ipi_send(struct mbox_chan *chan, const void *data) writel(msg->buf[i], &mbx[i]);

/* Use SMC calls for Exception Level less than 3 where TF-A is available */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && current_el() < 3) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && current_el() < 3) { ret = zynqmp_ipi_fw_call(zynqmp, SMC_IPI_MAILBOX_NOTIFY, 0);

debug("%s, send %ld bytes\n", __func__, msg->len); @@ -148,7 +148,7 @@ static int zynqmp_ipi_recv(struct mbox_chan *chan, void *data) msg->buf[i] = readl(&mbx[i]);

/* Ack to remote if EL is not 3 */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && current_el() < 3) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && current_el() < 3) { ret = zynqmp_ipi_fw_call(zynqmp, SMC_IPI_MAILBOX_ACK, IPI_SMC_ACK_EIRQ_MASK); } @@ -168,7 +168,7 @@ static int zynqmp_ipi_dest_probe(struct udevice *dev)

node = dev_ofnode(dev);

- if (IS_ENABLED(CONFIG_SPL_BUILD) || of_machine_is_compatible("xlnx,zynqmp")) + if (IS_ENABLED(CONFIG_XPL_BUILD) || of_machine_is_compatible("xlnx,zynqmp")) zynqmp->el3_supported = true;

ret = dev_read_u32(dev->parent, "xlnx,ipi-id", &zynqmp->local_id); diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index e53d52c47b3..51ef51f1ed3 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_$(SPL_TPL_)CROS_EC) += cros_ec.o obj-$(CONFIG_$(SPL_TPL_)CROS_EC_SANDBOX) += cros_ec_sandbox.o obj-$(CONFIG_$(SPL_TPL_)CROS_EC_LPC) += cros_ec_lpc.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SANDBOX) += sandbox_adder.o obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o @@ -19,13 +19,13 @@ obj-$(CONFIG_SANDBOX) += swap_case.o endif

ifdef CONFIG_$(SPL_)DM_I2C -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o obj-$(CONFIG_USB_HUB_USB251XB) += usb251xb.o endif endif ifdef CONFIG_SPL_OF_PLATDATA -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SANDBOX) += spltest_sandbox.o endif endif diff --git a/drivers/misc/gsc.c b/drivers/misc/gsc.c index feb02f97065..dee0bdd9663 100644 --- a/drivers/misc/gsc.c +++ b/drivers/misc/gsc.c @@ -389,7 +389,7 @@ static int gsc_probe(struct udevice *dev) if (priv->rtc) dev_set_priv(priv->rtc, priv);

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD gsc_banner(dev); #endif

diff --git a/drivers/misc/imx8/scu.c b/drivers/misc/imx8/scu.c index bbd7e24200b..5d3db0bc4df 100644 --- a/drivers/misc/imx8/scu.c +++ b/drivers/misc/imx8/scu.c @@ -191,7 +191,7 @@ static int imx8_scu_probe(struct udevice *dev) if (addr == FDT_ADDR_T_NONE) return -EINVAL;

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD plat->base = (struct mu_type *)CONFIG_MU_BASE_SPL; #else plat->base = (struct mu_type *)addr; diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 235c477c2e0..952201923d8 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -20,7 +20,7 @@ endif

obj-$(CONFIG_SUPPORT_EMMC_BOOT) += mmc_boot.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o endif

diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index 83cdc9fd66d..c8db4f811c2 100644 --- a/drivers/mmc/mmc-uclass.c +++ b/drivers/mmc/mmc-uclass.c @@ -301,7 +301,7 @@ struct mmc *find_mmc_device(int dev_num) ret = blk_find_device(UCLASS_MMC, dev_num, &dev);

if (ret) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("MMC Device %d not found\n", dev_num); #endif return NULL; @@ -373,7 +373,7 @@ void mmc_do_preinit(void) } }

-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) void print_mmc_devices(char separator) { struct udevice *dev; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 96b0e20d669..55d24451e6e 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -328,7 +328,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms) break;

if (status & MMC_STATUS_MASK) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("Status Error: %#08x\n", status); #endif return -ECOMM; @@ -341,7 +341,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout_ms) }

if (timeout_ms <= 0) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("Timeout waiting card ready\n"); #endif return -ETIMEDOUT; @@ -483,7 +483,7 @@ static int mmc_read_blocks(struct mmc *mmc, void *dst, lbaint_t start,

if (blkcnt > 1) { if (mmc_send_stop_transmission(mmc, false)) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("mmc fail to send stop cmd\n"); #endif return 0; @@ -534,7 +534,7 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, lbaint_t blkcnt, return 0;

if ((start + blkcnt) > block_dev->lba) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("MMC: block number 0x" LBAF " exceeds max(0x" LBAF ")\n", start + blkcnt, block_dev->lba); #endif @@ -2424,7 +2424,7 @@ static int mmc_startup_v4(struct mmc *mmc) mmc->capacity_gp[i] <<= 19; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (part_completed) { mmc->enh_user_size = (ext_csd[EXT_CSD_ENH_SIZE_MULT + 2] << 16) + @@ -2723,7 +2723,7 @@ static int mmc_startup(struct mmc *mmc) bdesc->blksz = mmc->read_bl_len; bdesc->log2blksz = LOG2(bdesc->blksz); bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len); -#if !defined(CONFIG_SPL_BUILD) || \ +#if !defined(CONFIG_XPL_BUILD) || \ (defined(CONFIG_SPL_LIBCOMMON_SUPPORT) && \ !CONFIG_IS_ENABLED(USE_TINY_PRINTF)) sprintf(bdesc->vendor, "Man %06x Snr %04x%04x", @@ -2741,7 +2741,7 @@ static int mmc_startup(struct mmc *mmc) bdesc->revision[0] = 0; #endif

-#if !defined(CONFIG_DM_MMC) && (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)) +#if !defined(CONFIG_DM_MMC) && (!defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT)) part_init(bdesc); #endif

@@ -2953,7 +2953,7 @@ retry: err = mmc_send_op_cond(mmc);

if (err) { -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) if (!quiet) log_err("Card did not respond to voltage select! : %d\n", err); @@ -3008,7 +3008,7 @@ int mmc_start_init(struct mmc *mmc) #endif if (no_card) { mmc->has_init = 0; -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) log_err("MMC: no card present\n"); #endif return -ENOMEDIUM; @@ -3195,7 +3195,7 @@ int mmc_initialize(struct bd_info *bis) if (ret) return ret;

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD print_mmc_devices(','); #endif

diff --git a/drivers/mmc/mmc_legacy.c b/drivers/mmc/mmc_legacy.c index a87d2276c1b..8f8ba34be71 100644 --- a/drivers/mmc/mmc_legacy.c +++ b/drivers/mmc/mmc_legacy.c @@ -44,7 +44,7 @@ struct mmc *find_mmc_device(int dev_num) return m; }

-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) printf("MMC Device %d not found\n", dev_num); #endif

@@ -93,7 +93,7 @@ void mmc_list_add(struct mmc *mmc) list_add_tail(&mmc->link, &mmc_devices); }

-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT) void print_mmc_devices(char separator) { struct mmc *m; diff --git a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h index b32123758ea..fc45f017e5d 100644 --- a/drivers/mmc/mmc_private.h +++ b/drivers/mmc/mmc_private.h @@ -67,7 +67,7 @@ static inline ulong mmc_bwrite(struct blk_desc *block_dev, lbaint_t start, } #endif

-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

#ifdef CONFIG_MMC_TRACE void mmmc_trace_before_send(struct mmc *mmc, struct mmc_cmd *cmd); diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 8e51453d2ae..e66ab25d02a 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -59,8 +59,8 @@ DECLARE_GLOBAL_DATA_PTR;

/* simplify defines to OMAP_HSMMC_USE_GPIO */ -#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO)) +#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_XPL_BUILD)) || \ + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_GPIO)) #define OMAP_HSMMC_USE_GPIO #else #undef OMAP_HSMMC_USE_GPIO diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c index fb77b049834..ca5752d24f1 100644 --- a/drivers/mmc/rockchip_dw_mmc.c +++ b/drivers/mmc/rockchip_dw_mmc.c @@ -83,7 +83,7 @@ static int rockchip_dwmmc_of_to_plat(struct udevice *dev) return -EINVAL; priv->fifo_mode = dev_read_bool(dev, "fifo-mode");

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (!priv->fifo_mode) priv->fifo_mode = dev_read_bool(dev, "u-boot,spl-fifo-mode"); #endif diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c index 35667b86b50..a25bcaf017f 100644 --- a/drivers/mmc/rockchip_sdhci.c +++ b/drivers/mmc/rockchip_sdhci.c @@ -609,7 +609,7 @@ static int rockchip_sdhci_probe(struct udevice *dev) * Disable use of DMA and force use of PIO mode in SPL to fix an issue * where loading part of TF-A into SRAM using DMA silently fails. */ - if (IS_ENABLED(CONFIG_SPL_BUILD) && + if (IS_ENABLED(CONFIG_XPL_BUILD) && dev_read_bool(dev, "u-boot,spl-fifo-mode")) host->flags &= ~USE_DMA;

diff --git a/drivers/mmc/socfpga_dw_mmc.c b/drivers/mmc/socfpga_dw_mmc.c index 3147d3019c0..9dc1ceaa09b 100644 --- a/drivers/mmc/socfpga_dw_mmc.c +++ b/drivers/mmc/socfpga_dw_mmc.c @@ -61,7 +61,7 @@ static int socfpga_dwmci_clksel(struct dwmci_host *host) debug("%s: drvsel %d smplsel %d\n", __func__, priv->drvsel, priv->smplsel);

-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) int ret;

ret = socfpga_secure_reg_write32(SOCFPGA_SECURE_REG_SYSMGR_SOC64_SDMMC, diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c index 0b396122b46..9fff1bc1a10 100644 --- a/drivers/mmc/tmio-common.c +++ b/drivers/mmc/tmio-common.c @@ -385,7 +385,7 @@ static bool tmio_sd_addr_is_dmaable(struct mmc_data *data) return false; }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (IS_ENABLED(CONFIG_ARCH_UNIPHIER) && !IS_ENABLED(CONFIG_ARM64)) { /* * For UniPhier ARMv7 SoCs, the stack is allocated in locked diff --git a/drivers/mmc/uniphier-sd.c b/drivers/mmc/uniphier-sd.c index 5b3650d52ee..cc89ff767ab 100644 --- a/drivers/mmc/uniphier-sd.c +++ b/drivers/mmc/uniphier-sd.c @@ -36,7 +36,7 @@ static ulong uniphier_sd_clk_get_rate(struct tmio_sd_priv *priv) { #if CONFIG_IS_ENABLED(CLK) return clk_get_rate(&priv->clk); -#elif CONFIG_SPL_BUILD +#elif CONFIG_XPL_BUILD return 100000000; #else return 0; @@ -50,7 +50,7 @@ static int uniphier_sd_probe(struct udevice *dev) priv->clk_get_rate = uniphier_sd_clk_get_rate; priv->read_poll_flag = TMIO_SD_DMA_INFO1_END_RD2;

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int ret;

ret = clk_get_by_index(dev, 0, &priv->clk); diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 24d0556cd37..0e2bdab4e7e 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -289,7 +289,7 @@ static inline int arasan_zynqmp_set_in_tapdelay(u32 node_id, u32 itap_delay) { int ret;

- if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { if (node_id == NODE_SD_0) { ret = zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN, SD0_ITAPCHGWIN); @@ -339,7 +339,7 @@ static inline int arasan_zynqmp_set_in_tapdelay(u32 node_id, u32 itap_delay)

static inline int arasan_zynqmp_set_out_tapdelay(u32 node_id, u32 otap_delay) { - if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { if (node_id == NODE_SD_0) return zynqmp_mmio_write(SD_OTAP_DLY, SD0_OTAPDLYSEL_MASK, @@ -356,7 +356,7 @@ static inline int arasan_zynqmp_set_out_tapdelay(u32 node_id, u32 otap_delay)

static inline int zynqmp_dll_reset(u32 node_id, u32 type) { - if (IS_ENABLED(CONFIG_SPL_BUILD) || current_el() == 3) { + if (IS_ENABLED(CONFIG_XPL_BUILD) || current_el() == 3) { if (node_id == NODE_SD_0) return zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST, type == PM_DLL_RESET_ASSERT ? diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 10d575e9f93..db010417b86 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -16,7 +16,7 @@ mtd-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o mtd-$(CONFIG_HBMC_AM654) += hbmc-am654.o

# U-Boot build -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),)

ifneq ($(mtd-y),) obj-y += mtd.o diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 96e186600a1..68b53dced1b 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+

-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),) nandcore-objs := core.o bbt.o obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o obj-$(CONFIG_MTD_RAW_NAND) += raw/ diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index 46fead6fa48..ca10ac7aecb 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD

ifdef CONFIG_SPL_NAND_DRIVERS NORMAL_DRIVERS=y diff --git a/drivers/mtd/nand/raw/atmel_nand.c b/drivers/mtd/nand/raw/atmel_nand.c index 4dbf7b47135..605298628d6 100644 --- a/drivers/mtd/nand/raw/atmel_nand.c +++ b/drivers/mtd/nand/raw/atmel_nand.c @@ -1251,7 +1251,7 @@ static int at91_nand_ready(struct mtd_info *mtd) } #endif

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* The following code is for SPL */ static struct mtd_info *mtd; static struct nand_chip nand_chip; @@ -1526,4 +1526,4 @@ void board_nand_init(void) if (atmel_nand_chip_init(i, base_addr[i])) log_err("atmel_nand: Fail to initialize #%d chip", i); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c index c89661badbf..4430c4e93ee 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c @@ -152,7 +152,7 @@ static void lpc32xx_nand_init(void) &lpc32xx_nand_mlc_registers->time_reg); }

-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD)

/** * lpc32xx_cmd_ctrl - write command to either cmd or data register @@ -606,7 +606,7 @@ void board_nand_init(void) pr_err("nand_register returned %i", ret); }

-#else /* defined(CONFIG_SPL_BUILD) */ +#else /* defined(CONFIG_XPL_BUILD) */

void nand_init(void) { @@ -770,4 +770,4 @@ unsigned int nand_page_size(void) return BYTES_PER_PAGE; }

-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_slc.c b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c index 4d643bc64bc..109c31fb4d1 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_slc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c @@ -84,7 +84,7 @@ static struct nand_ecclayout lpc32xx_nand_oob_16 = { } };

-#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) #define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CFG_SYS_NAND_ECCSIZE)

/* @@ -162,7 +162,7 @@ static int lpc32xx_nand_dev_ready(struct mtd_info *mtd) return readl(&lpc32xx_nand_slc_regs->stat) & STAT_NAND_READY; }

-#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) /* * Prepares DMA descriptors for NAND RD/WR operations * If the size is < 256 Bytes then it is assumed to be @@ -510,7 +510,7 @@ static void lpc32xx_write_byte(struct mtd_info *mtd, uint8_t byte) */ int board_nand_init(struct nand_chip *lpc32xx_chip) { -#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) int ret;

/* Acquire a channel for our use */ @@ -533,7 +533,7 @@ int board_nand_init(struct nand_chip *lpc32xx_chip) lpc32xx_chip->read_byte = lpc32xx_read_byte; lpc32xx_chip->write_byte = lpc32xx_write_byte;

-#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) /* Hardware ECC calculation is supported when DMA driver is selected */ lpc32xx_chip->ecc.mode = NAND_ECC_HW;

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 0545c23e268..1b65c6f6443 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -414,7 +414,7 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd_to_nand(mtd); int ret = 0; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int res; #endif

@@ -434,7 +434,7 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) nand_release_device(mtd); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* Mark block bad in BBT */ if (chip->bbt) { res = nand_markbad_bbt(mtd, ofs); @@ -488,7 +488,7 @@ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs) if (!chip->bbt) return 0; /* Return info from the table */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD return nand_isreserved_bbt(mtd, ofs); #else return 0; @@ -518,7 +518,7 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt) return chip->block_bad(mtd, ofs);

/* Return info from the table */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD return nand_isbad_bbt(mtd, ofs, allowbbt); #else return 0; @@ -3729,7 +3729,7 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) if (!chip->read_buf || chip->read_buf == nand_read_buf) chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (!chip->scan_bbt) chip->scan_bbt = nand_default_bbt; #endif diff --git a/drivers/mtd/nand/raw/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c index a36e2a148cc..9c704c60e8e 100644 --- a/drivers/mtd/nand/raw/omap_gpmc.c +++ b/drivers/mtd/nand/raw/omap_gpmc.c @@ -1011,7 +1011,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, return 0; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * omap_nand_switch_ecc - switch the ECC operation between different engines * (h/w and s/w) and different algorithms (hamming and BCHx) @@ -1072,7 +1072,7 @@ int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength) err = nand_scan_tail(mtd); return err; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

/* * Board-specific NAND initialization. The following members of the diff --git a/drivers/mtd/nand/raw/sand_nand.c b/drivers/mtd/nand/raw/sand_nand.c index 456e841b1c4..3678bb8a41b 100644 --- a/drivers/mtd/nand/raw/sand_nand.c +++ b/drivers/mtd/nand/raw/sand_nand.c @@ -680,7 +680,7 @@ void board_nand_init(void) log_info("Failed to get sandbox NAND: %d\n", err); }

-#if IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_NAND_INIT) +#if IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_NAND_INIT) void nand_deselect(void) { nand_chip->select_chip(nand_to_mtd(nand_chip), -1); diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile index 4dc417a5794..7f4a8514c17 100644 --- a/drivers/mtd/onenand/Makefile +++ b/drivers/mtd/onenand/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2005-2007 Samsung Electronics. # Kyungmin Park kyungmin.park@samsung.com

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_CMD_ONENAND) := onenand_uboot.o onenand_base.o onenand_bbt.o obj-$(CONFIG_SAMSUNG_ONENAND) += samsung.o else diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 409395382f5..2a287a62a47 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_$(SPL_TPL_)DM_SPI_FLASH) += sf-uclass.o spi-nor-y := sf_probe.o spi-nor-ids.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o ifeq ($(CONFIG_$(SPL_TPL_)SPI_FLASH_TINY),y) spi-nor-y += spi-nor-tiny.o diff --git a/drivers/mtd/spi/sf-uclass.c b/drivers/mtd/spi/sf-uclass.c index a4d15bd64aa..102a9236826 100644 --- a/drivers/mtd/spi/sf-uclass.c +++ b/drivers/mtd/spi/sf-uclass.c @@ -54,7 +54,7 @@ struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs, struct udevice *bus; char *str;

-#if defined(CONFIG_SPL_BUILD) && CONFIG_IS_ENABLED(USE_TINY_PRINTF) +#if defined(CONFIG_XPL_BUILD) && CONFIG_IS_ENABLED(USE_TINY_PRINTF) str = "spi_flash"; #else char name[30]; diff --git a/drivers/mtd/spi/sf_dataflash.c b/drivers/mtd/spi/sf_dataflash.c index 6db24189c8e..438eb3698d5 100644 --- a/drivers/mtd/spi/sf_dataflash.c +++ b/drivers/mtd/spi/sf_dataflash.c @@ -438,7 +438,7 @@ static int add_dataflash(struct udevice *dev, char *name, int nr_pages, spi_flash->size = nr_pages * pagesize; spi_flash->erase_size = pagesize;

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("SPI DataFlash: Detected %s with page size ", spi_flash->name); print_size(spi_flash->page_size, ", erase size "); print_size(spi_flash->erase_size, ", total "); diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 8f7a77e7169..b29b390a0ae 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -1030,7 +1030,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)

while (len) { schedule(); - if (!IS_ENABLED(CONFIG_SPL_BUILD) && ctrlc()) { + if (!IS_ENABLED(CONFIG_XPL_BUILD) && ctrlc()) { addr_known = false; ret = -EINTR; goto erase_err; @@ -4262,7 +4262,7 @@ int spi_nor_scan(struct spi_nor *nor) nor->erase_size = mtd->erasesize; nor->sector_size = mtd->erasesize;

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD printf("SF: Detected %s with page size ", nor->name); print_size(nor->page_size, ", erase size "); print_size(nor->erase_size, ", total "); diff --git a/drivers/net/dwc_eth_xgmac_socfpga.c b/drivers/net/dwc_eth_xgmac_socfpga.c index 270c1b0ca6c..87fb7e887e7 100644 --- a/drivers/net/dwc_eth_xgmac_socfpga.c +++ b/drivers/net/dwc_eth_xgmac_socfpga.c @@ -37,7 +37,7 @@ static int dwxgmac_socfpga_do_setphy(struct udevice *dev, u32 modereg) u32 modemask = SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << xgmac->syscon_phy_regshift;

- if (!(IS_ENABLED(CONFIG_SPL_BUILD)) && IS_ENABLED(CONFIG_SPL_ATF)) { + if (!(IS_ENABLED(CONFIG_XPL_BUILD)) && IS_ENABLED(CONFIG_SPL_ATF)) { u32 index = ((u64)xgmac->syscon_phy - socfpga_get_sysmgr_addr() - SYSMGR_SOC64_EMAC0) >> 2;

diff --git a/drivers/net/dwmac_socfpga.c b/drivers/net/dwmac_socfpga.c index bba3fc4d34b..a9e2d8c0972 100644 --- a/drivers/net/dwmac_socfpga.c +++ b/drivers/net/dwmac_socfpga.c @@ -68,7 +68,7 @@ static int dwmac_socfpga_do_setphy(struct udevice *dev, u32 modereg) struct dwmac_socfpga_plat *pdata = dev_get_plat(dev); u32 modemask = SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << pdata->reg_shift;

-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ATF) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_ATF) u32 index = ((u64)pdata->phy_intf - socfpga_get_sysmgr_addr() - SYSMGR_SOC64_EMAC0) >> 2;

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c index ede3959c94f..2c373c7c12e 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c @@ -671,7 +671,7 @@ const struct pinctrl_ops mtk_pinctrl_ops = { };

#if CONFIG_IS_ENABLED(DM_GPIO) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO)) + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_GPIO)) static int mtk_gpio_get(struct udevice *dev, unsigned int off) { int val, err; @@ -814,7 +814,7 @@ int mtk_pinctrl_common_probe(struct udevice *dev, }

#if CONFIG_IS_ENABLED(DM_GPIO) || \ - (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO)) + (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_GPIO)) ret = mtk_gpiochip_register(dev); #endif

diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c index eada1001240..fbf0271f08a 100644 --- a/drivers/pinctrl/pinctrl_stm32.c +++ b/drivers/pinctrl/pinctrl_stm32.c @@ -39,7 +39,7 @@ struct stm32_gpio_bank { struct list_head list; };

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD

static char pin_name[PINNAME_SIZE]; static const char * const pinmux_mode[GPIOF_COUNT] = { @@ -488,7 +488,7 @@ static struct pinctrl_ops stm32_pinctrl_ops = { #else /* PINCTRL_FULL */ .set_state_simple = stm32_pinctrl_set_state_simple, #endif /* PINCTRL_FULL */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD .get_pin_name = stm32_pinctrl_get_pin_name, .get_pins_count = stm32_pinctrl_get_pins_count, .get_pin_muxing = stm32_pinctrl_get_pin_muxing, diff --git a/drivers/pinctrl/tegra/Makefile b/drivers/pinctrl/tegra/Makefile index 75d3cabc62b..b1dda417475 100644 --- a/drivers/pinctrl/tegra/Makefile +++ b/drivers/pinctrl/tegra/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD ifdef CONFIG_TEGRA20 obj-y += pinctrl-tegra20.o else diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier.h b/drivers/pinctrl/uniphier/pinctrl-uniphier.h index 5951835d6e8..da7bb4f6377 100644 --- a/drivers/pinctrl/uniphier/pinctrl-uniphier.h +++ b/drivers/pinctrl/uniphier/pinctrl-uniphier.h @@ -126,7 +126,7 @@ struct uniphier_pinctrl_socdata {

#define __UNIPHIER_PINMUX_FUNCTION(func) #func

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* * a tricky way to drop unneeded *_pins and *_muxvals arrays from SPL, * suppressing "defined but not used" warnings. diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 6f7e6fb0a6b..5a987194cda 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -9,7 +9,7 @@ obj-y += pmic/ obj-y += regulator/

obj-$(CONFIG_AXP221_POWER) += axp221.o -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o obj-$(CONFIG_AXP305_POWER) += axp_spl.o diff --git a/drivers/power/pmic/rk8xx.c b/drivers/power/pmic/rk8xx.c index 4d5a5ceafad..a14555cf472 100644 --- a/drivers/power/pmic/rk8xx.c +++ b/drivers/power/pmic/rk8xx.c @@ -237,7 +237,7 @@ static int rk8xx_bind(struct udevice *dev) if (!children) debug("%s: %s - no child found\n", __func__, dev->name);

- if (IS_ENABLED(CONFIG_SPL_BUILD) && + if (IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON)) dev_or_flags(dev, DM_FLAG_PROBE_AFTER_BIND);

@@ -331,7 +331,7 @@ static int rk8xx_probe(struct udevice *dev) pmic_reg_read(dev, init_data[i].reg)); }

- if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { printf("PMIC: RK%x ", show_variant); if (on_source && off_source) printf("(on=0x%02x, off=0x%02x)", diff --git a/drivers/power/pmic/stpmic1.c b/drivers/power/pmic/stpmic1.c index c99a0c27b33..f0415fbd172 100644 --- a/drivers/power/pmic/stpmic1.c +++ b/drivers/power/pmic/stpmic1.c @@ -91,7 +91,7 @@ static int stpmic1_bind(struct udevice *dev) dev_dbg(dev, "no child found\n"); #endif /* DM_REGULATOR */

- if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { ret = device_bind_driver(dev, "stpmic1-nvm", "stpmic1-nvm", NULL); if (ret) @@ -124,7 +124,7 @@ U_BOOT_DRIVER(pmic_stpmic1) = { .ops = &stpmic1_ops, };

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int stpmic1_nvm_rw(struct udevice *dev, u8 addr, u8 *buf, int buf_len, enum pmic_nvm_op op) { @@ -230,7 +230,7 @@ U_BOOT_DRIVER(stpmic1_nvm) = { .id = UCLASS_MISC, .ops = &stpmic1_nvm_ops, }; -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

#ifdef CONFIG_SYSRESET static int stpmic1_sysreset_request(struct udevice *dev, enum sysreset_t type) diff --git a/drivers/power/power_core.c b/drivers/power/power_core.c index 1caf9f09346..61b2fe5f54a 100644 --- a/drivers/power/power_core.c +++ b/drivers/power/power_core.c @@ -78,7 +78,7 @@ struct pmic *pmic_get(const char *s) return NULL; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int pmic_dump(struct pmic *p) { int i, ret; diff --git a/drivers/power/regulator/rk8xx.c b/drivers/power/regulator/rk8xx.c index 34e61511d88..3f18ee65ce0 100644 --- a/drivers/power/regulator/rk8xx.c +++ b/drivers/power/regulator/rk8xx.c @@ -16,7 +16,7 @@ #include <power/pmic.h> #include <power/regulator.h>

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #define ENABLE_DRIVER #endif

diff --git a/drivers/power/sy8106a.c b/drivers/power/sy8106a.c index fb6028de71a..d9a2b6904b0 100644 --- a/drivers/power/sy8106a.c +++ b/drivers/power/sy8106a.c @@ -10,7 +10,7 @@ #define SY8106A_VOUT1_SEL 1 #define SY8106A_VOUT1_SEL_ENABLE (1 << 7)

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static u8 sy8106a_mvolt_to_cfg(int mvolt, int min, int max, int div) { if (mvolt < min) diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index fdb2e78ec9e..35d8f5761e1 100644 --- a/drivers/ram/Makefile +++ b/drivers/ram/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_K3_DDRSS) += k3-ddrss/ obj-$(CONFIG_IMXRT_SDRAM) += imxrt_sdram.o

obj-$(CONFIG_RAM_SIFIVE) += sifive/ -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_STARFIVE_DDR) += starfive/ endif

diff --git a/drivers/ram/mediatek/ddr3-mt7629.c b/drivers/ram/mediatek/ddr3-mt7629.c index c27c4593b9d..e9791697066 100644 --- a/drivers/ram/mediatek/ddr3-mt7629.c +++ b/drivers/ram/mediatek/ddr3-mt7629.c @@ -233,7 +233,7 @@ struct mtk_ddr3_priv { struct clk mem_mux; };

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static int mtk_ddr3_rank_size_detect(struct udevice *dev) { struct mtk_ddr3_priv *priv = dev_get_priv(dev); @@ -697,7 +697,7 @@ static int mtk_ddr3_probe(struct udevice *dev) if (priv->dramc_ao == FDT_ADDR_T_NONE) return -EINVAL;

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD int ret;

ret = clk_get_by_index(dev, 0, &priv->phy); diff --git a/drivers/ram/rockchip/sdram_rk3188.c b/drivers/ram/rockchip/sdram_rk3188.c index 618bce5c9f4..ffff7d55f33 100644 --- a/drivers/ram/rockchip/sdram_rk3188.c +++ b/drivers/ram/rockchip/sdram_rk3188.c @@ -84,7 +84,7 @@ const int ddrconf_table[] = { #define DQS_GATE_TRAINING_ERROR_RANK0 (1 << 4) #define DQS_GATE_TRAINING_ERROR_RANK1 (2 << 4)

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static void copy_to_reg(u32 *dest, const u32 *src, u32 n) { int i; @@ -851,7 +851,7 @@ static int rk3188_dmc_of_to_plat(struct udevice *dev)

return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

#if CONFIG_IS_ENABLED(OF_PLATDATA) static int conv_of_plat(struct udevice *dev) @@ -878,7 +878,7 @@ static int conv_of_plat(struct udevice *dev)

static int rk3188_dmc_probe(struct udevice *dev) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD struct rk3188_sdram_params *plat = dev_get_plat(dev); struct regmap *map; struct udevice *dev_clk; @@ -888,7 +888,7 @@ static int rk3188_dmc_probe(struct udevice *dev)

priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #if CONFIG_IS_ENABLED(OF_PLATDATA) ret = conv_of_plat(dev); if (ret) @@ -950,12 +950,12 @@ U_BOOT_DRIVER(rockchip_rk3188_dmc) = { .id = UCLASS_RAM, .of_match = rk3188_dmc_ids, .ops = &rk3188_dmc_ops, -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .of_to_plat = rk3188_dmc_of_to_plat, #endif .probe = rk3188_dmc_probe, .priv_auto = sizeof(struct dram_info), -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD .plat_auto = sizeof(struct rk3188_sdram_params), #endif }; diff --git a/drivers/ram/rockchip/sdram_rk3288.c b/drivers/ram/rockchip/sdram_rk3288.c index c9f61e933e9..25ceab98ee9 100644 --- a/drivers/ram/rockchip/sdram_rk3288.c +++ b/drivers/ram/rockchip/sdram_rk3288.c @@ -84,7 +84,7 @@ const int ddrconf_table[] = { #define DQS_GATE_TRAINING_ERROR_RANK1 (2 << 4)

#if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) static void copy_to_reg(u32 *dest, const u32 *src, u32 n) { int i; @@ -1013,7 +1013,7 @@ static int rk3288_dmc_of_to_plat(struct udevice *dev)

return 0; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

#if CONFIG_IS_ENABLED(OF_PLATDATA) static int conv_of_plat(struct udevice *dev) @@ -1041,7 +1041,7 @@ static int conv_of_plat(struct udevice *dev) static int rk3288_dmc_probe(struct udevice *dev) { #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) struct rk3288_sdram_params *plat = dev_get_plat(dev); struct udevice *dev_clk; struct regmap *map; @@ -1051,7 +1051,7 @@ static int rk3288_dmc_probe(struct udevice *dev)

priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU); #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) #if CONFIG_IS_ENABLED(OF_PLATDATA) ret = conv_of_plat(dev); if (ret) @@ -1119,13 +1119,13 @@ U_BOOT_DRIVER(rockchip_rk3288_dmc) = { .of_match = rk3288_dmc_ids, .ops = &rk3288_dmc_ops, #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) .of_to_plat = rk3288_dmc_of_to_plat, #endif .probe = rk3288_dmc_probe, .priv_auto = sizeof(struct dram_info), #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) .plat_auto = sizeof(struct rk3288_sdram_params), #endif }; diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c index 5676c099a43..6fa8f268770 100644 --- a/drivers/ram/rockchip/sdram_rk3399.c +++ b/drivers/ram/rockchip/sdram_rk3399.c @@ -3196,7 +3196,7 @@ U_BOOT_DRIVER(dmc_rk3399) = { .probe = rk3399_dmc_probe, .priv_auto = sizeof(struct dram_info), #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) .plat_auto = sizeof(struct rockchip_dmc_plat), #endif }; diff --git a/drivers/ram/rockchip/sdram_rv1126.c b/drivers/ram/rockchip/sdram_rv1126.c index 4fbb088a8d9..b371f597d23 100644 --- a/drivers/ram/rockchip/sdram_rv1126.c +++ b/drivers/ram/rockchip/sdram_rv1126.c @@ -34,7 +34,7 @@

struct dram_info { #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) void __iomem *pctl; void __iomem *phy; struct rv1126_cru *cru; @@ -49,7 +49,7 @@ struct dram_info { };

#if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD))

#define GRF_BASE_ADDR 0xfe000000 #define PMU_GRF_BASE_ADDR 0xfe020000 @@ -3507,7 +3507,7 @@ error: static int rv1126_dmc_probe(struct udevice *dev) { #if defined(CONFIG_TPL_BUILD) || \ - (!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD)) + (!defined(CONFIG_TPL) && defined(CONFIG_XPL_BUILD)) if (rv1126_dmc_init(dev)) return 0; #else diff --git a/drivers/ram/sifive/sifive_ddr.c b/drivers/ram/sifive/sifive_ddr.c index bd2f438d727..c555d2af2d0 100644 --- a/drivers/ram/sifive/sifive_ddr.c +++ b/drivers/ram/sifive/sifive_ddr.c @@ -91,7 +91,7 @@ struct sifive_ddr_info { u32 *physical_filter_ctrl; };

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) struct sifive_ddr_params { struct sifive_ddrctl pctl_regs; struct sifive_ddrphy phy_regs; @@ -337,7 +337,7 @@ static int sifive_ddr_probe(struct udevice *dev) priv->info.base = gd->ram_base; priv->info.size = gd->ram_size;

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) int ret; u32 clock = 0;

@@ -404,7 +404,7 @@ U_BOOT_DRIVER(sifive_ddr) = { .ops = &sifive_ddr_ops, .probe = sifive_ddr_probe, .priv_auto = sizeof(struct sifive_ddr_info), -#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) .plat_auto = sizeof(struct sifive_dmc_plat), #endif }; diff --git a/drivers/ram/starfive/Makefile b/drivers/ram/starfive/Makefile index 1df42c377bd..f1567b04b4c 100644 --- a/drivers/ram/starfive/Makefile +++ b/drivers/ram/starfive/Makefile @@ -2,10 +2,10 @@ # # Copyright (c) 2022 StarFive, Inc # -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrphy_start.o obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrphy_train.o obj-$(CONFIG_SPL_STARFIVE_DDR) += starfive_ddr.o obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrphy_utils.o obj-$(CONFIG_SPL_STARFIVE_DDR) += ddrcsr_boot.o -endif \ No newline at end of file +endif diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c index debc458c0e2..e9cd6229ec4 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ram.c +++ b/drivers/ram/stm32mp1/stm32mp1_ram.c @@ -371,7 +371,7 @@ static int stm32mp1_ddr_probe(struct udevice *dev)

priv->info.base = STM32_DDR_BASE;

- if (IS_ENABLED(CONFIG_SPL_BUILD)) { + if (IS_ENABLED(CONFIG_XPL_BUILD)) { priv->info.size = 0; ret = stm32mp1_ddr_setup(dev);

diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c index 866437fd24f..76d108080d9 100644 --- a/drivers/reset/reset-socfpga.c +++ b/drivers/reset/reset-socfpga.c @@ -46,7 +46,7 @@ struct socfpga_reset_data { */ static bool socfpga_reset_keep_enabled(void) { -#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(ENV_SUPPORT) +#if !defined(CONFIG_XPL_BUILD) || CONFIG_IS_ENABLED(ENV_SUPPORT) const char *env_str; long val;

diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 628be4c89fb..7c19a435722 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SCSI) += scsi.o scsi-uclass.o ifdef CONFIG_SCSI obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += scsi_bootdev.o @@ -12,7 +12,7 @@ obj-$(CONFIG_SANDBOX) += scsi_emul.o endif endif

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_SPL_SATA obj-$(CONFIG_SCSI) += scsi.o scsi-uclass.o endif diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 78810f98367..66bd30b837b 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -63,7 +63,7 @@ obj-$(CONFIG_XEN_SERIAL) += serial_xen.o obj-$(CONFIG_XTENSA_SEMIHOSTING_SERIAL) += serial_xtensa_semihosting.o obj-$(CONFIG_S5P4418_PL011_SERIAL) += serial_s5p4418_pl011.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o endif obj-$(CONFIG_UART4_SERIAL) += serial_adi_uart4.o diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index 7e45a80969e..0b35582aaa4 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -218,7 +218,7 @@ static const struct dm_serial_ops atmel_serial_ops = { .setbrg = atmel_serial_setbrg, };

-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_CLK) +#if defined(CONFIG_XPL_BUILD) && !defined(CONFIG_SPL_CLK) static int atmel_serial_enable_clk(struct udevice *dev) { struct atmel_serial_priv *priv = dev_get_priv(dev); diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 55bc39648d7..3489228127e 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -227,7 +227,7 @@ static void ns16550_setbrg(struct ns16550 *com_port, int baud_divisor)

void ns16550_init(struct ns16550 *com_port, int baud_divisor) { -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_OMAP34XX) /* * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode * before SPL starts only THRE bit is set. We have to empty the @@ -303,7 +303,7 @@ void ns16550_putc(struct ns16550 *com_port, char c) char ns16550_getc(struct ns16550 *com_port) { while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) { -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_TTY) extern void usbtty_poll(void); usbtty_poll(); #endif diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 84f02f7ac76..9feaa1eceec 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -101,7 +101,7 @@ static void serial_find_console_or_panic(void) } } } - if (!IS_ENABLED(CONFIG_SPL_BUILD) || !CONFIG_IS_ENABLED(OF_CONTROL) || + if (!IS_ENABLED(CONFIG_XPL_BUILD) || !CONFIG_IS_ENABLED(OF_CONTROL) || !blob) { /* * Try to use CONFIG_CONS_INDEX if available (it is numbered diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index dc4bb06fa99..e10ca6eef76 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -315,7 +315,7 @@ static struct serial_device *get_current(void)

/* We must have a console device */ if (!dev) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD puts("Cannot find console\n"); hang(); #else diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 801b7645afa..734780a124a 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -117,7 +117,7 @@ static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, u8 reg_width, writeb(val % 16, &uart->rest.value); }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int s5p_serial_setbrg(struct udevice *dev, int baudrate) { struct s5p_serial_plat *plat = dev_get_plat(dev); diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 55f13c00ddf..b74712f3eeb 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -152,7 +152,7 @@ static int zynq_serial_setbrg(struct udevice *dev, int baudrate) return 0; }

-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) static int zynq_serial_setconfig(struct udevice *dev, uint serial_config) { struct zynq_uart_plat *plat = dev_get_plat(dev); diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c index 6bd48b1b373..b520c727900 100644 --- a/drivers/spi/designware_spi.c +++ b/drivers/spi/designware_spi.c @@ -219,7 +219,7 @@ static int dw_spi_dwc_init(struct udevice *bus, struct dw_spi_priv *priv)

static int request_gpio_cs(struct udevice *bus) { -#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_XPL_BUILD) struct dw_spi_priv *priv = dev_get_priv(bus); int ret;

@@ -482,7 +482,7 @@ static int poll_transfer(struct dw_spi_priv *priv) */ __weak void external_cs_manage(struct udevice *dev, bool on) { -#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_SPL_BUILD) +#if CONFIG_IS_ENABLED(DM_GPIO) && !defined(CONFIG_XPL_BUILD) struct dw_spi_priv *priv = dev_get_priv(dev->parent);

if (!dm_gpio_is_valid(&priv->cs_gpio)) diff --git a/drivers/spi/rockchip_sfc.c b/drivers/spi/rockchip_sfc.c index 596c22aa010..43aefc20c9a 100644 --- a/drivers/spi/rockchip_sfc.c +++ b/drivers/spi/rockchip_sfc.c @@ -229,7 +229,7 @@ static int rockchip_sfc_ofdata_to_platdata(struct udevice *bus) sfc->regbase = dev_read_addr_ptr(bus); sfc->use_dma = !dev_read_bool(bus, "rockchip,sfc-no-dma");

- if (IS_ENABLED(CONFIG_SPL_BUILD) && sfc->use_dma) + if (IS_ENABLED(CONFIG_XPL_BUILD) && sfc->use_dma) sfc->use_dma = !dev_read_bool(bus, "u-boot,spl-sfc-no-dma");

#if CONFIG_IS_ENABLED(CLK) diff --git a/drivers/sysreset/sysreset_ast.c b/drivers/sysreset/sysreset_ast.c index ef09440bbef..4e15ebd53cc 100644 --- a/drivers/sysreset/sysreset_ast.c +++ b/drivers/sysreset/sysreset_ast.c @@ -33,7 +33,7 @@ static int ast_sysreset_request(struct udevice *dev, enum sysreset_t type) return -EPROTONOSUPPORT; }

-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) ret = wdt_expire_now(wdt, reset_mode); if (ret) { debug("Sysreset failed: %d", ret); diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c index cbe06a9e7b6..4cfd38ec245 100644 --- a/drivers/usb/cdns3/core.c +++ b/drivers/usb/cdns3/core.c @@ -149,7 +149,7 @@ static int cdns3_core_init_role(struct cdns3 *cdns)

dr_mode = best_dr_mode;

-#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_XPL_BUILD) if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { ret = cdns3_host_init(cdns); if (ret) { @@ -412,7 +412,7 @@ int cdns3_bind(struct udevice *parent)

switch (dr_mode) { #if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) case USB_DR_MODE_HOST: debug("%s: dr_mode: HOST\n", __func__); driver = "cdns-usb3-host"; @@ -498,7 +498,7 @@ int dm_usb_gadget_handle_interrupts(struct udevice *dev) #endif

#if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) static int cdns3_host_probe(struct udevice *dev) { struct cdns3_host_priv *priv = dev_get_priv(dev); diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6abcce0d9c7..3158487cba4 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_$(SPL_TPL_)USB_GADGET) += epautoconf.o config.o usbstring.o obj-$(CONFIG_$(SPL_TPL_)USB_ETHER) += epautoconf.o config.o usbstring.o ether.o obj-$(CONFIG_$(SPL_TPL_)USB_ETH_RNDIS) += rndis.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o obj-$(CONFIG_SPL_DFU) += f_dfu.o obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o @@ -21,7 +21,7 @@ obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY) += bcm_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_MAX3420) += max3420_udc.o -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o obj-$(CONFIG_DFU_OVER_USB) += f_dfu.o diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c index 5d62eb475d0..36934b1bcf7 100644 --- a/drivers/usb/gadget/f_sdp.c +++ b/drivers/usb/gadget/f_sdp.c @@ -411,7 +411,7 @@ static void sdp_rx_data_complete(struct usb_ep *ep, struct usb_request *req) return; }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD env_set_hex("filesize", sdp->dnl_bytes); #endif printf("done\n"); @@ -736,7 +736,7 @@ static u32 sdp_jump_imxheader(void *address) return 0; }

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD static ulong sdp_load_read(struct spl_load_info *load, ulong sector, ulong count, void *buf) { @@ -825,7 +825,7 @@ static int sdp_handle_in_ep(struct spl_image_info *spl_image,

/* If imx header fails, try some U-Boot specific headers */ if (status) { -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER)) sdp_func->jmp_address = (u32)search_container_header((ulong)sdp_func->jmp_address, sdp_func->dnl_bytes); else if (IS_ENABLED(CONFIG_SPL_LOAD_FIT)) @@ -907,7 +907,7 @@ static void sdp_handle_out_ep(void) } }

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int sdp_handle(struct udevice *udc) #else int spl_sdp_handle(struct udevice *udc, struct spl_image_info *spl_image, @@ -928,7 +928,7 @@ int spl_sdp_handle(struct udevice *udc, struct spl_image_info *spl_image, schedule(); dm_usb_gadget_handle_interrupts(udc);

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD flag = sdp_handle_in_ep(spl_image, bootdev); #else flag = sdp_handle_in_ep(NULL, NULL); diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c index f8e14eabfb2..26fee141f6e 100644 --- a/drivers/usb/mtu3/mtu3_plat.c +++ b/drivers/usb/mtu3/mtu3_plat.c @@ -266,7 +266,7 @@ U_BOOT_DRIVER(mtu3_peripheral) = { #endif

#if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) static int mtu3_host_probe(struct udevice *dev) { struct ssusb_mtk *ssusb = dev_to_ssusb(dev->parent); @@ -334,7 +334,7 @@ static int mtu3_glue_bind(struct udevice *parent) #endif

#if defined(CONFIG_SPL_USB_HOST) || \ - (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)) + (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST)) case USB_DR_MODE_HOST: dev_dbg(parent, "%s: dr_mode: host\n", __func__); driver = "mtu3-host";

Complete this rename for all directories outside arch/ board/ drivers/ and include/

Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass sjg@chromium.org ---

Changes in v3: - Drop the change in Makefile.xpl since XPL is already defined

README | 4 ++-- boot/Makefile | 2 +- boot/image-android-dt.c | 2 +- boot/image-android.c | 2 +- boot/image-fit-sig.c | 2 +- cmd/Makefile | 4 ++-- cmd/nvedit.c | 12 ++++++------ common/Makefile | 8 ++++---- common/cli_readline.c | 2 +- common/console.c | 2 +- common/hash.c | 2 +- common/spl/Makefile | 2 +- common/splash_source.c | 2 +- config.mk | 2 +- disk/part.c | 2 +- disk/part_dos.c | 2 +- doc/develop/distro.rst | 4 ++-- doc/develop/qconfig.rst | 2 +- doc/develop/tests_sandbox.rst | 2 +- dts/Makefile | 2 +- env/Makefile | 2 +- env/common.c | 4 ++-- env/fat.c | 4 ++-- env/flash.c | 6 +++--- env/mmc.c | 6 +++--- env/nand.c | 8 ++++---- env/nowhere.c | 2 +- env/sf.c | 2 +- fs/Makefile | 2 +- fs/fs.c | 6 +++--- lib/Makefile | 6 +++--- lib/crypto/Makefile | 4 ++-- lib/display_options.c | 2 +- lib/fdtdec.c | 4 ++-- lib/hang.c | 2 +- lib/hashtable.c | 4 ++-- lib/hexdump.c | 2 +- lib/uuid.c | 2 +- net/bootp.c | 2 +- net/net.c | 8 ++++---- scripts/Kbuild.include | 2 +- scripts/Makefile.xpl | 2 +- test/Makefile | 2 +- test/cmd_ut.c | 2 +- test/dm/Makefile | 2 +- test/lib/Makefile | 2 +- test/test-main.c | 2 +- tools/binman/test/generated/autoconf.h | 2 +- 48 files changed, 78 insertions(+), 78 deletions(-)

diff --git a/README b/README index 54e723162fd..c27c386e968 100644 --- a/README +++ b/README @@ -1418,13 +1418,13 @@ Low Level (hardware related) configuration options: This only takes effect if the memory commands are activated globally (CONFIG_CMD_MEMORY).

-- CONFIG_SPL_BUILD +- CONFIG_XPL_BUILD Set when the currently running compilation is for an artifact that will end up in one of the 'xPL' builds, i.e. SPL, TPL or VPL. Code that needs phase-specific behaviour can check this, or (where possible) use xpl_phase() instead.

- Note that CONFIG_SPL_BUILD *is* always defined when either + Note that CONFIG_XPL_BUILD *is* always defined when either of CONFIG_TPL_BUILD / CONFIG_VPL_BUILD is defined. This can be counter-intuitive and should perhaps be changed.

diff --git a/boot/Makefile b/boot/Makefile index 40e2337de0f..5bf07e83388 100644 --- a/boot/Makefile +++ b/boot/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2004-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD

obj-$(CONFIG_BOOT_RETRY) += bootretry.o obj-$(CONFIG_CMD_BOOTM) += bootm.o bootm_os.o diff --git a/boot/image-android-dt.c b/boot/image-android-dt.c index 3b25018c2e7..653835cea76 100644 --- a/boot/image-android-dt.c +++ b/boot/image-android-dt.c @@ -72,7 +72,7 @@ bool android_dt_get_fdt_by_index(ulong hdr_addr, u32 index, ulong *addr, return true; }

-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) static void android_dt_print_fdt_info(const struct fdt_header *fdt) { u32 fdt_size; diff --git a/boot/image-android.c b/boot/image-android.c index 774565fd1fe..fdfff58a2a7 100644 --- a/boot/image-android.c +++ b/boot/image-android.c @@ -652,7 +652,7 @@ bool android_image_get_dtb_by_index(ulong hdr_addr, ulong vendor_boot_img, return false; }

-#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /** * android_print_contents - prints out the contents of the Android format image * @hdr: pointer to the Android format image header diff --git a/boot/image-fit-sig.c b/boot/image-fit-sig.c index fe328df4a85..35873b1fb0e 100644 --- a/boot/image-fit-sig.c +++ b/boot/image-fit-sig.c @@ -48,7 +48,7 @@ struct image_region *fit_region_make_list(const void *fit, * Use malloc() except in SPL (to save code size). In SPL the caller * must allocate the array. */ - if (!IS_ENABLED(CONFIG_SPL_BUILD) && !region) + if (!IS_ENABLED(CONFIG_XPL_BUILD) && !region) region = calloc(sizeof(*region), count); if (!region) return NULL; diff --git a/cmd/Makefile b/cmd/Makefile index 91227f1249c..ed62e1c45f8 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2004-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD # core command obj-y += boot.o obj-$(CONFIG_CMD_BOOTM) += bootm.o @@ -247,7 +247,7 @@ obj-$(CONFIG_ARCH_MVEBU) += mvebu/ obj-$(CONFIG_ARCH_KEYSTONE) += ti/ obj-$(CONFIG_ARCH_K3) += ti/ obj-$(CONFIG_ARCH_OMAP2PLUS) += ti/ -endif # !CONFIG_SPL_BUILD +endif # !CONFIG_XPL_BUILD

obj-$(CONFIG_$(SPL_)CMD_TLV_EEPROM) += tlv_eeprom.o

diff --git a/cmd/nvedit.c b/cmd/nvedit.c index 98a687bcabb..74ff5c6fc11 100644 --- a/cmd/nvedit.c +++ b/cmd/nvedit.c @@ -49,7 +49,7 @@ DECLARE_GLOBAL_DATA_PTR; */ #define MAX_ENV_SIZE (1 << 20) /* 1 MiB */

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Command interface: print one or all environment variables * @@ -182,9 +182,9 @@ DONE: return 0; } #endif -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_env_set(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { @@ -503,9 +503,9 @@ static int do_env_select(struct cmd_tbl *cmdtp, int flag, int argc, } #endif

-#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD static int do_env_default(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { @@ -1289,4 +1289,4 @@ U_BOOT_CMD_COMPLETE( var_complete ); #endif -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/common/Makefile b/common/Makefile index c52d4c39f6b..ae8984659c0 100644 --- a/common/Makefile +++ b/common/Makefile @@ -4,7 +4,7 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

# core -ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += init/ obj-y += main.o obj-y += exports.o @@ -42,12 +42,12 @@ obj-$(CONFIG_MENU) += menu.o obj-$(CONFIG_UPDATE_COMMON) += update.o obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o

-endif # !CONFIG_SPL_BUILD +endif # !CONFIG_XPL_BUILD

obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_SPL_DFU obj-$(CONFIG_DFU_OVER_USB) += dfu.o endif @@ -58,7 +58,7 @@ obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o obj-$(CONFIG_SPL_MUSB_NEW) += usb.o obj-$(CONFIG_SPL_SPLASH_SCREEN) += splash.o obj-$(CONFIG_SPL_SPLASH_SOURCE) += splash_source.o -endif # CONFIG_SPL_BUILD +endif # CONFIG_XPL_BUILD

#others obj-$(CONFIG_DDR_SPD) += ddr_spd.o diff --git a/common/cli_readline.c b/common/cli_readline.c index 4cb82b40149..4e6797a1944 100644 --- a/common/cli_readline.c +++ b/common/cli_readline.c @@ -73,7 +73,7 @@ static char *delete_char (char *buffer, char *p, int *colp, int *np, int plen) #define getcmd_getch() getchar() #define getcmd_cbeep() getcmd_putch('\a')

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD #define HIST_MAX 3 #define HIST_SIZE 32 #else diff --git a/common/console.c b/common/console.c index c9e206aec41..22224701e45 100644 --- a/common/console.c +++ b/common/console.c @@ -191,7 +191,7 @@ static int console_setfile(int file, struct stdio_dev * dev) /* Assign the new device (leaving the existing one started) */ stdio_devices[file] = dev;

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * Update monitor functions * (to use the console stuff by other applications) diff --git a/common/hash.c b/common/hash.c index ac63803fed9..db6925d6782 100644 --- a/common/hash.c +++ b/common/hash.c @@ -403,7 +403,7 @@ int hash_block(const char *algo_name, const void *data, unsigned int len, return 0; }

-#if !defined(CONFIG_SPL_BUILD) && (defined(CONFIG_CMD_HASH) || \ +#if !defined(CONFIG_XPL_BUILD) && (defined(CONFIG_CMD_HASH) || \ defined(CONFIG_CMD_SHA1SUM) || defined(CONFIG_CMD_CRC32)) || \ defined(CONFIG_CMD_MD5SUM) /** diff --git a/common/spl/Makefile b/common/spl/Makefile index 137b18428bd..10528b31a7c 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -6,7 +6,7 @@ # Based on common/Makefile. #

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o diff --git a/common/splash_source.c b/common/splash_source.c index 5b271160449..f43e7cc1be7 100644 --- a/common/splash_source.c +++ b/common/splash_source.c @@ -215,7 +215,7 @@ static int splash_init_virtio(void) } }

-#if defined(CONFIG_CMD_UBIFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_UBIFS) && !defined(CONFIG_XPL_BUILD) static int splash_mount_ubifs(struct splash_location *location) { int res; diff --git a/config.mk b/config.mk index b915c29b3f3..e294be2a4c4 100644 --- a/config.mk +++ b/config.mk @@ -21,7 +21,7 @@ VENDOR :=

ARCH := $(CONFIG_SYS_ARCH:"%"=%) CPU := $(CONFIG_SYS_CPU:"%"=%) -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_ARCH_TEGRA CPU := arm720t endif diff --git a/disk/part.c b/disk/part.c index 706d77b3194..303178161c0 100644 --- a/disk/part.c +++ b/disk/part.c @@ -482,7 +482,7 @@ int blk_get_device_part_str(const char *ifname, const char *dev_part_str, } #endif

-#if IS_ENABLED(CONFIG_CMD_UBIFS) && !IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_CMD_UBIFS) && !IS_ENABLED(CONFIG_XPL_BUILD) /* * Special-case ubi, ubi goes through a mtd, rather than through * a regular block device. diff --git a/disk/part_dos.c b/disk/part_dos.c index 09af2aeeb99..96f748702fd 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -100,7 +100,7 @@ static int test_block_type(unsigned char *buffer)

static int part_test_dos(struct blk_desc *desc) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD ALLOC_CACHE_ALIGN_BUFFER(legacy_mbr, mbr, DIV_ROUND_UP(desc->blksz, sizeof(legacy_mbr)));

diff --git a/doc/develop/distro.rst b/doc/develop/distro.rst index 9e715b23ebb..637bc27fc2d 100644 --- a/doc/develop/distro.rst +++ b/doc/develop/distro.rst @@ -189,7 +189,7 @@ TO BE UPDATED:

In your board configuration file, include the following::

- #ifndef CONFIG_SPL_BUILD + #ifndef CONFIG_XPL_BUILD #include <config_distro_bootcmd.h> #endif

@@ -316,7 +316,7 @@ that it supports the correct set of possible boot device types. To provide this configuration, simply define macro BOOT_TARGET_DEVICES prior to including <config_distro_bootcmd.h>. For example::

- #ifndef CONFIG_SPL_BUILD + #ifndef CONFIG_XPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ diff --git a/doc/develop/qconfig.rst b/doc/develop/qconfig.rst index 123779eab17..a18f32470ca 100644 --- a/doc/develop/qconfig.rst +++ b/doc/develop/qconfig.rst @@ -226,7 +226,7 @@ Available options Look for moved config options in spl/include/autoconf.mk instead of include/autoconf.mk. This is useful for moving options for SPL build because SPL related options (mostly prefixed with CONFIG_SPL_) are - sometimes blocked by CONFIG_SPL_BUILD ifdef conditionals. + sometimes blocked by CONFIG_XPL_BUILD ifdef conditionals.

-j, --jobs Specify the number of threads to run simultaneously. If not specified, diff --git a/doc/develop/tests_sandbox.rst b/doc/develop/tests_sandbox.rst index 72923070150..0630180bc55 100644 --- a/doc/develop/tests_sandbox.rst +++ b/doc/develop/tests_sandbox.rst @@ -278,7 +278,7 @@ Whatever sandbox build is used, which tests are present is determined by which source files are built. For sandbox_spl, the of_platdata tests are built because of the build rule in test/dm/Makefile::

- ifeq ($(CONFIG_SPL_BUILD),y) + ifeq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_SPL_OF_PLATDATA) += of_platdata.o else ...other tests for non-spl diff --git a/dts/Makefile b/dts/Makefile index d6c2c9daf31..62a65688cf5 100644 --- a/dts/Makefile +++ b/dts/Makefile @@ -53,7 +53,7 @@ PHONY += arch-dtbs arch-dtbs: $(Q)$(MAKE) $(build)=$(dt_dir) dtbs

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_OF_EMBED) := dt-spl.dtb.o # support "out-of-tree" build for dtb-spl $(obj)/dt-spl.dtb.o: $(obj)/dt-spl.dtb.S FORCE diff --git a/env/Makefile b/env/Makefile index 673b979fdfa..c5145c1735f 100644 --- a/env/Makefile +++ b/env/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += env.o obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += attr.o obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += flags.o

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD obj-y += callback.o obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o obj-$(CONFIG_ENV_IS_IN_EEPROM) += embedded.o diff --git a/env/common.c b/env/common.c index 6cba7f1c187..a58955a4f42 100644 --- a/env/common.c +++ b/env/common.c @@ -61,7 +61,7 @@ int env_do_env_set(int flag, int argc, char *const argv[], int env_flag)

debug("Initial value for argc=%d\n", argc);

-#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_CMD_NVEDIT_EFI) +#if !IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_CMD_NVEDIT_EFI) if (argc > 1 && argv[1][0] == '-' && argv[1][1] == 'e') return do_env_set_efi(NULL, flag, --argc, ++argv); #endif @@ -551,7 +551,7 @@ int env_export(env_t *env_out) void env_relocate(void) { if (gd->env_valid == ENV_INVALID) { -#if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_XPL_BUILD) /* Environment not changable */ env_set_default(NULL, 0); #else diff --git a/env/fat.c b/env/fat.c index f3f8b7301ee..b04b1d9c315 100644 --- a/env/fat.c +++ b/env/fat.c @@ -22,7 +22,7 @@ #include <asm/global_data.h> #include <linux/stddef.h>

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* TODO(sjg@chromium.org): Figure out why this is needed */ # if !defined(CONFIG_TARGET_AM335X_EVM) || defined(CONFIG_SPL_OS_BOOT) # define LOADENV @@ -129,7 +129,7 @@ static int env_fat_load(void) if (!strcmp(ifname, "mmc")) mmc_initialize(NULL); #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #if defined(CONFIG_AHCI) || defined(CONFIG_SCSI) if (!strcmp(CONFIG_ENV_FAT_INTERFACE, "scsi")) scsi_scan(true); diff --git a/env/flash.c b/env/flash.c index 1bd6e7003d6..0f7393d830c 100644 --- a/env/flash.c +++ b/env/flash.c @@ -22,7 +22,7 @@

DECLARE_GLOBAL_DATA_PTR;

-#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD # if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_FLASH) # include <flash.h> # define CMD_SAVEENV @@ -35,11 +35,11 @@ DECLARE_GLOBAL_DATA_PTR; #if (!defined(CONFIG_MICROBLAZE) && !defined(CONFIG_ARCH_ZYNQ) && \ !defined(CONFIG_TARGET_MCCMON6) && !defined(CONFIG_TARGET_X600) && \ !defined(CONFIG_TARGET_EDMINIV2)) || \ - !defined(CONFIG_SPL_BUILD) + !defined(CONFIG_XPL_BUILD) #define LOADENV #endif

-#if !defined(CONFIG_TARGET_X600) || !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_TARGET_X600) || !defined(CONFIG_XPL_BUILD) #define INITENV #endif

diff --git a/env/mmc.c b/env/mmc.c index 0338aa6c56a..5fc0dae23a8 100644 --- a/env/mmc.c +++ b/env/mmc.c @@ -239,7 +239,7 @@ static void fini_mmc_for_env(struct mmc *mmc) mmc_set_env_part_restore(mmc); }

-#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_XPL_BUILD) static inline int write_env(struct mmc *mmc, unsigned long size, unsigned long offset, const void *buffer) { @@ -368,7 +368,7 @@ fini: fini_mmc_for_env(mmc); return ret; } -#endif /* CONFIG_CMD_SAVEENV && !CONFIG_SPL_BUILD */ +#endif /* CONFIG_CMD_SAVEENV && !CONFIG_XPL_BUILD */

static inline int read_env(struct mmc *mmc, unsigned long size, unsigned long offset, const void *buffer) @@ -498,7 +498,7 @@ U_BOOT_ENV_LOCATION(mmc) = { .location = ENVL_MMC, ENV_NAME("MMC") .load = env_mmc_load, -#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_XPL_BUILD) .save = env_save_ptr(env_mmc_save), .erase = ENV_ERASE_PTR(env_mmc_erase) #endif diff --git a/env/nand.c b/env/nand.c index fef5697ec39..fdaa903cd61 100644 --- a/env/nand.c +++ b/env/nand.c @@ -26,9 +26,9 @@ #include <u-boot/crc.h>

#if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_NAND) && \ - !defined(CONFIG_SPL_BUILD) + !defined(CONFIG_XPL_BUILD) #define CMD_SAVEENV -#elif defined(CONFIG_ENV_OFFSET_REDUND) && !defined(CONFIG_SPL_BUILD) +#elif defined(CONFIG_ENV_OFFSET_REDUND) && !defined(CONFIG_XPL_BUILD) #error CONFIG_ENV_OFFSET_REDUND must have CONFIG_CMD_SAVEENV & CONFIG_CMD_NAND #endif

@@ -224,7 +224,7 @@ static int env_nand_save(void) } #endif /* CMD_SAVEENV */

-#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_XPL_BUILD) static int readenv(size_t offset, u_char *buf) { return nand_spl_load_image(offset, CONFIG_ENV_SIZE, buf); @@ -265,7 +265,7 @@ static int readenv(size_t offset, u_char *buf)

return 0; } -#endif /* #if defined(CONFIG_SPL_BUILD) */ +#endif /* #if defined(CONFIG_XPL_BUILD) */

#ifdef CONFIG_ENV_OFFSET_OOB int get_nand_env_oob(struct mtd_info *mtd, unsigned long *result) diff --git a/env/nowhere.c b/env/nowhere.c index 326f27db2e9..6b9b6e2fe0b 100644 --- a/env/nowhere.c +++ b/env/nowhere.c @@ -33,7 +33,7 @@ static int env_nowhere_load(void) * searches default_environment array in that case. * For U-Boot proper, import the default environment to allow reload. */ - if (!IS_ENABLED(CONFIG_SPL_BUILD)) + if (!IS_ENABLED(CONFIG_XPL_BUILD)) env_set_default(NULL, 0);

gd->env_valid = ENV_INVALID; diff --git a/env/sf.c b/env/sf.c index 21ac0c202e7..eb4c8d5ec95 100644 --- a/env/sf.c +++ b/env/sf.c @@ -329,7 +329,7 @@ done:

__weak void *env_sf_get_env_addr(void) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD return (void *)CONFIG_ENV_ADDR; #else return NULL; diff --git a/fs/Makefile b/fs/Makefile index 7b05c79e0cc..ec3e31c7c75 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -4,7 +4,7 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_FS_LOADER) += fs.o obj-$(CONFIG_SPL_FS_FAT) += fat/ obj-$(CONFIG_SPL_FS_EXT4) += ext4/ diff --git a/fs/fs.c b/fs/fs.c index 4bc28d1dffb..e2915e7cf79 100644 --- a/fs/fs.c +++ b/fs/fs.c @@ -237,7 +237,7 @@ static struct fstype_info fstypes[] = { .mkdir = fs_mkdir_unsupported, }, #endif -#if IS_ENABLED(CONFIG_SANDBOX) && !IS_ENABLED(CONFIG_SPL_BUILD) +#if IS_ENABLED(CONFIG_SANDBOX) && !IS_ENABLED(CONFIG_XPL_BUILD) { .fstype = FS_TYPE_SANDBOX, .name = "sandbox", @@ -275,7 +275,7 @@ static struct fstype_info fstypes[] = { .ln = fs_ln_unsupported, }, #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #ifdef CONFIG_CMD_UBIFS { .fstype = FS_TYPE_UBIFS, @@ -296,7 +296,7 @@ static struct fstype_info fstypes[] = { }, #endif #endif -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD #ifdef CONFIG_FS_BTRFS { .fstype = FS_TYPE_BTRFS, diff --git a/lib/Makefile b/lib/Makefile index d300249f57c..66f84408aae 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-ifndef CONFIG_SPL_BUILD +ifndef CONFIG_XPL_BUILD

obj-$(CONFIG_EFI) += efi/ obj-$(CONFIG_EFI_LOADER) += efi_driver/ @@ -96,7 +96,7 @@ obj-$(CONFIG_LIBAVB) += libavb/ obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/ obj-$(CONFIG_$(SPL_TPL_)OF_REAL) += fdtdec_common.o fdtdec.o

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16-ccitt.o obj-$(CONFIG_$(SPL_TPL_)HASH) += crc16-ccitt.o obj-$(CONFIG_MMC_SPI_CRC_ON) += crc16-ccitt.o @@ -131,7 +131,7 @@ obj-$(CONFIG_LIB_UUID) += uuid.o obj-$(CONFIG_LIB_RAND) += rand.o obj-y += panic.o

-ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) # SPL U-Boot may use full-printf, tiny-printf or none at all ifdef CONFIG_$(SPL_TPL_)USE_TINY_PRINTF obj-$(CONFIG_$(SPL_TPL_)SPRINTF) += tiny-printf.o diff --git a/lib/crypto/Makefile b/lib/crypto/Makefile index bec1bc95a65..3259c951241 100644 --- a/lib/crypto/Makefile +++ b/lib/crypto/Makefile @@ -18,12 +18,12 @@ rsa_public_key-y := \ rsa_helper.o

$(obj)/rsapubkey.asn1.o: $(obj)/rsapubkey.asn1.c $(obj)/rsapubkey.asn1.h -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD CFLAGS_rsapubkey.asn1.o += -I$(obj) endif

$(obj)/rsa_helper.o: $(obj)/rsapubkey.asn1.h -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD CFLAGS_rsa_helper.o += -I$(obj) endif

diff --git a/lib/display_options.c b/lib/display_options.c index d5df53ab15f..2c15cc5b5c4 100644 --- a/lib/display_options.c +++ b/lib/display_options.c @@ -236,7 +236,7 @@ int print_buffer(ulong addr, const void *data, uint width, uint count, addr += thislinelen * width; count -= thislinelen;

- if (!IS_ENABLED(CONFIG_SPL_BUILD) && ctrlc()) + if (!IS_ENABLED(CONFIG_XPL_BUILD) && ctrlc()) return -EINTR; }

diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 6276b27af33..b2d38795a48 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -1230,7 +1230,7 @@ static void *fdt_find_separate(void) if (IS_ENABLED(CONFIG_SANDBOX)) return NULL;

-#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* FDT is at end of BSS unless it is in a different memory region */ if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS)) fdt_blob = (ulong *)_image_binary_end; @@ -1714,7 +1714,7 @@ int fdtdec_setup(void) }

/* Allow the early environment to override the fdt address */ - if (!IS_ENABLED(CONFIG_SPL_BUILD)) { + if (!IS_ENABLED(CONFIG_XPL_BUILD)) { ulong addr;

addr = env_get_hex("fdtcontroladdr", 0); diff --git a/lib/hang.c b/lib/hang.c index 3cfb06e9ca8..f3c3c896f0a 100644 --- a/lib/hang.c +++ b/lib/hang.c @@ -22,7 +22,7 @@ */ void hang(void) { -#if !defined(CONFIG_SPL_BUILD) || \ +#if !defined(CONFIG_XPL_BUILD) || \ (CONFIG_IS_ENABLED(LIBCOMMON_SUPPORT) && \ CONFIG_IS_ENABLED(SERIAL)) puts("### ERROR ### Please RESET the board ###\n"); diff --git a/lib/hashtable.c b/lib/hashtable.c index 9613adc5540..e8a59e2dcac 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -221,7 +221,7 @@ static int do_callback(const struct env_entry *e, const char *name, const char *value, enum env_op op, int flags) { -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (e->callback) return e->callback(name, value, op, flags); #endif @@ -487,7 +487,7 @@ int hdelete_r(const char *key, struct hsearch_data *htab, int flag) return 0; }

-#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV)) +#if !(defined(CONFIG_XPL_BUILD) && !defined(CONFIG_SPL_SAVEENV)) /* * hexport() */ diff --git a/lib/hexdump.c b/lib/hexdump.c index 2bc508ff504..29feccd60fc 100644 --- a/lib/hexdump.c +++ b/lib/hexdump.c @@ -157,7 +157,7 @@ int print_hex_dump(const char *prefix_str, int prefix_type, int rowsize, printf("%s%s\n", prefix_str, linebuf); break; } - if (!IS_ENABLED(CONFIG_SPL_BUILD) && ctrlc()) + if (!IS_ENABLED(CONFIG_XPL_BUILD) && ctrlc()) return -EINTR; }

diff --git a/lib/uuid.c b/lib/uuid.c index 11b86ffb02e..c6a27b7d044 100644 --- a/lib/uuid.c +++ b/lib/uuid.c @@ -477,7 +477,7 @@ void gen_rand_uuid_str(char *uuid_str, int str_format) uuid_bin_to_str(uuid_bin, uuid_str, str_format); }

-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CMD_UUID) +#if !defined(CONFIG_XPL_BUILD) && defined(CONFIG_CMD_UUID) int do_uuid(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { char uuid[UUID_STR_LEN + 1]; diff --git a/net/bootp.c b/net/bootp.c index 512ab2ed7c8..afd5b48094a 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -434,7 +434,7 @@ static u8 *add_vci(u8 *e) char *vci = NULL; char *env_vci = env_get("bootp_vci");

-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_NET_VCI_STRING) +#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_NET_VCI_STRING) vci = CONFIG_SPL_NET_VCI_STRING; #elif defined(CONFIG_BOOTP_VCI_STRING) vci = CONFIG_BOOTP_VCI_STRING; diff --git a/net/net.c b/net/net.c index 1e0b7c85624..fd7d413e488 100644 --- a/net/net.c +++ b/net/net.c @@ -305,7 +305,7 @@ U_BOOT_ENV_CALLBACK(dnsip, on_dnsip); */ void net_auto_load(void) { -#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_XPL_BUILD) const char *s = env_get("autoload");

if (s != NULL && strcmp(s, "NFS") == 0) { @@ -559,7 +559,7 @@ restart: ping6_start(); break; #endif -#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_CMD_NFS) && !defined(CONFIG_XPL_BUILD) case NFS: nfs_start(); break; @@ -574,7 +574,7 @@ restart: cdp_start(); break; #endif -#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD) case NETCONS: nc_start(); break; @@ -1439,7 +1439,7 @@ void net_process_received_packet(uchar *in_packet, int len) } }

-#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_XPL_BUILD) nc_input_packet((uchar *)ip + IP_UDP_HDR_SIZE, src_ip, ntohs(ip->udp_dst), diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 5daceb26061..b70b75ee68d 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -324,7 +324,7 @@ endif # do not delete intermediate files automatically .SECONDARY:

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD SPL_ := SPL_ ifeq ($(CONFIG_VPL_BUILD),y) SPL_TPL_ := VPL_ diff --git a/scripts/Makefile.xpl b/scripts/Makefile.xpl index ad21d451a30..08453f0b415 100644 --- a/scripts/Makefile.xpl +++ b/scripts/Makefile.xpl @@ -55,7 +55,7 @@ endif

export SPL_NAME

-ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD SPL_ := SPL_ ifeq ($(CONFIG_VPL_BUILD),y) SPL_TPL_ := VPL_ diff --git a/test/Makefile b/test/Makefile index ed312cd0a48..f801d87e385 100644 --- a/test/Makefile +++ b/test/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_$(SPL_)CMDLINE) += str_ut.o obj-$(CONFIG_UT_TIME) += time_ut.o obj-y += ut.o

-ifeq ($(CONFIG_SPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD),) obj-y += boot/ obj-$(CONFIG_UNIT_TEST) += common/ obj-y += log/ diff --git a/test/cmd_ut.c b/test/cmd_ut.c index 38ba89ee33e..53fddebd49d 100644 --- a/test/cmd_ut.c +++ b/test/cmd_ut.c @@ -256,7 +256,7 @@ U_BOOT_LONGHELP(ut, "\ntime - very basic test of time functions" #endif #if defined(CONFIG_UT_UNICODE) && \ - !defined(CONFIG_SPL_BUILD) && !defined(API_BUILD) + !defined(CONFIG_XPL_BUILD) && !defined(API_BUILD) "\nunicode - Unicode functions" #endif ); diff --git a/test/dm/Makefile b/test/dm/Makefile index c12589d487c..c6c63051e0b 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_UT_DM) += test-dm.o

# Tests for particular subsystems - when enabling driver model for a new # subsystem you must add sandbox tests here. -ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_XPL_BUILD),y) obj-$(CONFIG_SPL_OF_PLATDATA) += of_platdata.o else obj-$(CONFIG_UT_DM) += bus.o diff --git a/test/lib/Makefile b/test/lib/Makefile index 70f14c46b1e..a54387a058e 100644 --- a/test/lib/Makefile +++ b/test/lib/Makefile @@ -2,7 +2,7 @@ # # (C) Copyright 2018 # Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc -ifeq ($(CONFIG_SPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD),) obj-y += cmd_ut_lib.o obj-y += abuf.o obj-y += alist.o diff --git a/test/test-main.c b/test/test-main.c index b3d3e24cdce..479dbb33b72 100644 --- a/test/test-main.c +++ b/test/test-main.c @@ -47,7 +47,7 @@ enum fdtchk_t { static enum fdtchk_t fdt_action(void) { /* For sandbox SPL builds, do nothing */ - if (IS_ENABLED(CONFIG_SANDBOX) && IS_ENABLED(CONFIG_SPL_BUILD)) + if (IS_ENABLED(CONFIG_SANDBOX) && IS_ENABLED(CONFIG_XPL_BUILD)) return FDTCHK_NONE;

/* Do a copy for sandbox (but only the U-Boot build, not SPL) */ diff --git a/tools/binman/test/generated/autoconf.h b/tools/binman/test/generated/autoconf.h index 6a23039f469..75af48f9116 100644 --- a/tools/binman/test/generated/autoconf.h +++ b/tools/binman/test/generated/autoconf.h @@ -1,3 +1,3 @@ #define CONFIG_BINMAN 1 -#define CONFIG_SPL_BUILD 1 +#define CONFIG_XPL_BUILD 1 #define CONFIG_SPL_BINMAN_SYMBOLS 1

Now that SPL means SPL (only) and is not defined for other phases, update kconfig rules.

This is done in one patch since otherwise many Binman tests fail.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v1)

include/linux/kconfig.h | 10 +++++----- tools/binman/test/generated/autoconf.h | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h index a59f2a61e6a..ec9584b2426 100644 --- a/include/linux/kconfig.h +++ b/include/linux/kconfig.h @@ -40,7 +40,7 @@ #define _CONFIG_PREFIX TPL_ #elif defined(CONFIG_VPL_BUILD) #define _CONFIG_PREFIX VPL_ -#elif defined(CONFIG_XPL_BUILD) +#elif defined(CONFIG_SPL_BUILD) #define _CONFIG_PREFIX SPL_ #else #define _CONFIG_PREFIX @@ -54,7 +54,7 @@ * CONFIG_VAL(FOO) evaluates to the value of * CONFIG_TOOLS_FOO if USE_HOSTCC is defined, * CONFIG_FOO if CONFIG_XPL_BUILD is undefined, - * CONFIG_SPL_FOO if CONFIG_XPL_BUILD is defined. + * CONFIG_SPL_FOO if CONFIG_SPL_BUILD is defined. * CONFIG_TPL_FOO if CONFIG_TPL_BUILD is defined. * CONFIG_VPL_FOO if CONFIG_VPL_BUILD is defined. */ @@ -107,21 +107,21 @@ long invalid_use_of_IF_ENABLED_INT(void); * CONFIG_IS_ENABLED(FOO) expands to * 1 if USE_HOSTCC is defined and CONFIG_TOOLS_FOO is set to 'y', * 1 if CONFIG_XPL_BUILD is undefined and CONFIG_FOO is set to 'y', - * 1 if CONFIG_XPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', + * 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', * 1 if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y', * 0 otherwise. * * CONFIG_IS_ENABLED(FOO, (abc)) expands to * abc if USE_HOSTCC is defined and CONFIG_TOOLS_FOO is set to 'y', * abc if CONFIG_XPL_BUILD is undefined and CONFIG_FOO is set to 'y', - * abc if CONFIG_XPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', + * abc if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', * abc if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y', * nothing otherwise. * * CONFIG_IS_ENABLED(FOO, (abc), (def)) expands to * abc if USE_HOSTCC is defined and CONFIG_TOOLS_FOO is set to 'y', * abc if CONFIG_XPL_BUILD is undefined and CONFIG_FOO is set to 'y', - * abc if CONFIG_XPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', + * abc if CONFIG_SPL_BUILD is defined and CONFIG_SPL_FOO is set to 'y', * abc if CONFIG_TPL_BUILD is defined and CONFIG_TPL_FOO is set to 'y', * def otherwise. * diff --git a/tools/binman/test/generated/autoconf.h b/tools/binman/test/generated/autoconf.h index 75af48f9116..6a23039f469 100644 --- a/tools/binman/test/generated/autoconf.h +++ b/tools/binman/test/generated/autoconf.h @@ -1,3 +1,3 @@ #define CONFIG_BINMAN 1 -#define CONFIG_XPL_BUILD 1 +#define CONFIG_SPL_BUILD 1 #define CONFIG_SPL_BINMAN_SYMBOLS 1

Use PHASE_ as the symbol to select a particular XPL build. This means that SPL_TPL_ is no-longer set.

Update the comment in bootstage to refer to this symbol, instead of SPL_

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v1)

Makefile | 2 +- arch/arm/cpu/armv8/Makefile | 2 +- arch/arm/lib/Makefile | 16 +++--- arch/arm/mach-at91/arm926ejs/Makefile | 2 +- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-rockchip/Makefile | 2 +- arch/powerpc/lib/Makefile | 2 +- arch/riscv/lib/Makefile | 14 ++--- arch/x86/Makefile | 6 +- arch/x86/cpu/Makefile | 8 +-- arch/x86/cpu/broadwell/Makefile | 10 ++-- arch/x86/cpu/intel_common/Makefile | 10 ++-- arch/x86/lib/Makefile | 6 +- board/coreboot/coreboot/Makefile | 2 +- boot/Makefile | 80 +++++++++++++-------------- common/Makefile | 26 ++++----- common/bootstage.c | 4 +- common/init/Makefile | 2 +- common/spl/Makefile | 56 +++++++++---------- disk/Makefile | 18 +++--- drivers/Makefile | 70 +++++++++++------------ drivers/adc/Makefile | 2 +- drivers/block/Makefile | 8 +-- drivers/cache/Makefile | 2 +- drivers/clk/Makefile | 18 +++--- drivers/clk/exynos/Makefile | 2 +- drivers/clk/imx/Makefile | 20 +++---- drivers/clk/ti/Makefile | 4 +- drivers/core/Makefile | 10 ++-- drivers/crypto/fsl/Makefile | 2 +- drivers/gpio/Makefile | 6 +- drivers/input/Makefile | 6 +- drivers/misc/Makefile | 16 +++--- drivers/mmc/Makefile | 6 +- drivers/mtd/Makefile | 4 +- drivers/mtd/nand/Makefile | 2 +- drivers/mtd/nand/raw/Makefile | 2 +- drivers/mtd/spi/Makefile | 8 +-- drivers/pinctrl/starfive/Makefile | 4 +- drivers/power/Makefile | 8 +-- drivers/power/acpi_pmc/Makefile | 2 +- drivers/power/pmic/Makefile | 4 +- drivers/power/regulator/Makefile | 2 +- drivers/ram/Makefile | 2 +- drivers/reset/Makefile | 2 +- drivers/rng/Makefile | 2 +- drivers/rtc/Makefile | 6 +- drivers/scsi/Makefile | 2 +- drivers/serial/Makefile | 2 +- drivers/spi/Makefile | 2 +- drivers/sysreset/Makefile | 14 ++--- drivers/tpm/Makefile | 4 +- drivers/usb/gadget/Makefile | 6 +- drivers/usb/host/Makefile | 4 +- drivers/video/Makefile | 16 +++--- drivers/watchdog/Makefile | 2 +- env/Makefile | 22 ++++---- fs/sandbox/Makefile | 2 +- lib/Makefile | 34 ++++++------ lib/acpi/Makefile | 2 +- lib/libfdt/Makefile | 2 +- lib/rsa/Makefile | 4 +- net/Makefile | 6 +- scripts/Kbuild.include | 8 +-- scripts/Makefile.xpl | 44 +++++++-------- test/dm/Makefile | 4 +- tools/qconfig.py | 6 +- 67 files changed, 338 insertions(+), 338 deletions(-)

diff --git a/Makefile b/Makefile index d38adcbd1e6..ca74406f21c 100644 --- a/Makefile +++ b/Makefile @@ -883,7 +883,7 @@ libs-y += drivers/usb/ulpi/ ifdef CONFIG_POST libs-y += post/ endif -libs-$(CONFIG_$(SPL_TPL_)UNIT_TEST) += test/ +libs-$(CONFIG_$(PHASE_)UNIT_TEST) += test/ libs-$(CONFIG_UT_ENV) += test/env/ libs-$(CONFIG_UT_OPTEE) += test/optee/ libs-$(CONFIG_UT_OVERLAY) += test/overlay/ diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index c5f568e2cb7..8747d2eb186 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -6,7 +6,7 @@ extra-y := start.o

obj-y += cpu.o -ifndef CONFIG_$(SPL_TPL_)TIMER +ifndef CONFIG_$(PHASE_)TIMER obj-$(CONFIG_SYS_ARCH_TIMER) += generic_timer.o endif ifndef CONFIG_$(XPL_)SYS_DCACHE_OFF diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index b73a0397541..211ff4960e1 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_BOOTZ) += bootm.o zimage.o else -obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o +obj-$(CONFIG_$(PHASE_)FRAMEWORK) += spl.o ifdef CONFIG_SPL_FRAMEWORK obj-$(CONFIG_CMD_BOOTI) += image.o obj-$(CONFIG_CMD_BOOTZ) += zimage.o @@ -42,14 +42,14 @@ endif obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o endif ifdef CONFIG_ARM64 -obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset-arm64.o -obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy-arm64.o +obj-$(CONFIG_$(PHASE_)USE_ARCH_MEMSET) += memset-arm64.o +obj-$(CONFIG_$(PHASE_)USE_ARCH_MEMCPY) += memcpy-arm64.o else -obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o -obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o +obj-$(CONFIG_$(PHASE_)USE_ARCH_MEMSET) += memset.o +obj-$(CONFIG_$(PHASE_)USE_ARCH_MEMCPY) += memcpy.o endif -obj-$(CONFIG_$(SPL_TPL_)SYS_L2_PL310) += cache-pl310.o -obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o +obj-$(CONFIG_$(PHASE_)SYS_L2_PL310) += cache-pl310.o +obj-$(CONFIG_$(PHASE_)SEMIHOSTING) += semihosting.o

ifneq ($(filter y,$(CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR) $(CONFIG_SAVE_PREV_BL_FDT_ADDR)),) obj-y += save_prev_bl_data.o @@ -73,7 +73,7 @@ obj-y += interrupts_64.o else obj-y += interrupts.o endif -ifndef CONFIG_$(SPL_TPL_)SYSRESET +ifndef CONFIG_$(PHASE_)SYSRESET obj-y += reset.o endif

diff --git a/arch/arm/mach-at91/arm926ejs/Makefile b/arch/arm/mach-at91/arm926ejs/Makefile index 1695708831c..8f0bc5d997e 100644 --- a/arch/arm/mach-at91/arm926ejs/Makefile +++ b/arch/arm/mach-at91/arm926ejs/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o obj-$(CONFIG_SAM9X60) += sam9x60_devices.o obj-y += clock.o obj-y += cpu.o -ifndef CONFIG_$(SPL_TPL_)SYSRESET +ifndef CONFIG_$(PHASE_)SYSRESET obj-y += reset.o endif ifneq ($(CONFIG_ATMEL_PIT_TIMER),y) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 9a85c764a55..fb5ea97e56e 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -26,7 +26,7 @@ obj-y += vc.o obj-y += abb.o endif

-ifeq ($(CONFIG_$(SPL_TPL_)SYS_DCACHE_OFF),) +ifeq ($(CONFIG_$(PHASE_)SYS_DCACHE_OFF),) obj-y += omap-cache.o endif

diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 76756c3661b..5e7edc99cdc 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -29,7 +29,7 @@ ifeq ($(CONFIG_TPL_BUILD),) obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o endif

-obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o +obj-$(CONFIG_$(PHASE_)RAM) += sdram.o

obj-$(CONFIG_ROCKCHIP_PX30) += px30/ obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index f797f8cee66..c0caa703caa 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -46,5 +46,5 @@ obj-y += traps.o endif # not minimal

ifdef CONFIG_XPL_BUILD -obj-$(CONFIG_$(SPL_TPL)_FRAMEWORK) += spl.o +obj-$(CONFIG_$(PHASE_)FRAMEWORK) += spl.o endif diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index 34b69c13392..608118135d7 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -40,11 +40,11 @@ extra-$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC) extra-$(CONFIG_CMD_BOOTEFI_SELFTEST) += $(EFI_CRT0) $(EFI_RELOC) extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC)

-obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o -obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMMOVE) += memmove.o -obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o -obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_STRLEN) += strlen_zbb.o -obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_STRCMP) += strcmp_zbb.o -obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_STRNCMP) += strncmp_zbb.o +obj-$(CONFIG_$(PHASE_)USE_ARCH_MEMSET) += memset.o +obj-$(CONFIG_$(PHASE_)USE_ARCH_MEMMOVE) += memmove.o +obj-$(CONFIG_$(PHASE_)USE_ARCH_MEMCPY) += memcpy.o +obj-$(CONFIG_$(PHASE_)USE_ARCH_STRLEN) += strlen_zbb.o +obj-$(CONFIG_$(PHASE_)USE_ARCH_STRCMP) += strcmp_zbb.o +obj-$(CONFIG_$(PHASE_)USE_ARCH_STRNCMP) += strncmp_zbb.o

-obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o +obj-$(CONFIG_$(PHASE_)SEMIHOSTING) += semihosting.o diff --git a/arch/x86/Makefile b/arch/x86/Makefile index bc1e1ede12a..fd409b9f720 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -4,7 +4,7 @@ ifeq ($(CONFIG_EFI_APP),) ifdef CONFIG_$(XPL_)X86_64 head-y := arch/x86/cpu/start64.o else -ifeq ($(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),y) +ifeq ($(CONFIG_$(PHASE_)X86_16BIT_INIT),y) head-y := arch/x86/cpu/start.o else ifndef CONFIG_SPL @@ -20,8 +20,8 @@ endif endif endif # EFI

-head-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += arch/x86/cpu/start16.o -head-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += arch/x86/cpu/resetvec.o +head-$(CONFIG_$(PHASE_)X86_16BIT_INIT) += arch/x86/cpu/start16.o +head-$(CONFIG_$(PHASE_)X86_16BIT_INIT) += arch/x86/cpu/resetvec.o

libs-y += arch/x86/cpu/ libs-y += arch/x86/lib/ diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile index 8899830370c..39c8b0835cc 100644 --- a/arch/x86/cpu/Makefile +++ b/arch/x86/cpu/Makefile @@ -9,7 +9,7 @@ ifeq ($(CONFIG_$(XPL_)X86_64),y) extra-y = start64.o else -ifeq ($(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),y) +ifeq ($(CONFIG_$(PHASE_)X86_16BIT_INIT),y) extra-y = start.o else ifndef CONFIG_SPL @@ -24,7 +24,7 @@ endif endif endif

-extra-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += resetvec.o start16.o +extra-$(CONFIG_$(PHASE_)X86_16BIT_INIT) += resetvec.o start16.o

obj-y += cpu.o ifndef CONFIG_TPL_BUILD @@ -54,10 +54,10 @@ obj-$(CONFIG_INTEL_QUARK) += quark/ obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/ obj-$(CONFIG_INTEL_TANGIER) += tangier/ obj-$(CONFIG_APIC) += lapic.o ioapic.o -obj-$(CONFIG_$(SPL_TPL_)ACPI_GPE) += acpi_gpe.o +obj-$(CONFIG_$(PHASE_)ACPI_GPE) += acpi_gpe.o obj-$(CONFIG_QFW) += qfw_cpu.o ifndef CONFIG_SYS_COREBOOT -obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += irq.o +obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += irq.o endif ifndef CONFIG_$(XPL_)X86_64 obj-$(CONFIG_$(XPL_)SMP) += mp_init.o diff --git a/arch/x86/cpu/broadwell/Makefile b/arch/x86/cpu/broadwell/Makefile index 6c6d0edac9b..dfe013e3833 100644 --- a/arch/x86/cpu/broadwell/Makefile +++ b/arch/x86/cpu/broadwell/Makefile @@ -2,8 +2,8 @@ # # Copyright (c) 2016 Google, Inc

-obj-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += cpu.o -obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += cpu_full.o +obj-$(CONFIG_$(PHASE_)X86_16BIT_INIT) += cpu.o +obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += cpu_full.o

ifdef CONFIG_SPL ifndef CONFIG_XPL_BUILD @@ -18,7 +18,7 @@ obj-y += sata.o endif endif

-ifeq ($(CONFIG_$(SPL_TPL_)X86_32BIT_INIT),) +ifeq ($(CONFIG_$(PHASE_)X86_32BIT_INIT),) #obj-y += cpu_from_spl.o endif

@@ -29,5 +29,5 @@ obj-y += northbridge.o obj-y += pch.o obj-y += pinctrl_broadwell.o obj-y += power_state.o -obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += refcode.o -obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += sdram.o +obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += refcode.o +obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += sdram.o diff --git a/arch/x86/cpu/intel_common/Makefile b/arch/x86/cpu/intel_common/Makefile index d2db5897377..a28e6c77c9c 100644 --- a/arch/x86/cpu/intel_common/Makefile +++ b/arch/x86/cpu/intel_common/Makefile @@ -5,10 +5,10 @@ obj-$(CONFIG_INTEL_ACPIGEN) += acpi.o

ifdef CONFIG_HAVE_MRC -obj-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += car.o -obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += me_status.o -obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += report_platform.o -obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += mrc.o +obj-$(CONFIG_$(PHASE_)X86_16BIT_INIT) += car.o +obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += me_status.o +obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += report_platform.o +obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += mrc.o endif

ifndef CONFIG_XPL_BUILD @@ -28,7 +28,7 @@ obj-y += lpc.o obj-y += lpss.o obj-$(CONFIG_$(XPL_)INTEL_GENERIC_WIFI) += generic_wifi.o ifndef CONFIG_EFI_APP -obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += microcode.o +obj-$(CONFIG_$(PHASE_)X86_32BIT_INIT) += microcode.o ifndef CONFIG_$(XPL_)X86_64 obj-y += microcode.o endif diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 53a94901bb4..7677c0c352f 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -5,7 +5,7 @@

obj-y += bdinfo.o

-ifndef CONFIG_$(SPL_TPL_)X86_64 +ifndef CONFIG_$(PHASE_)X86_64 obj-y += bios.o obj-y += bios_asm.o obj-y += bios_interrupts.o @@ -27,7 +27,7 @@ obj-y += init_helpers.o obj-y += interrupts.o obj-y += lpc-uclass.o obj-y += mpspec.o -obj-$(CONFIG_$(SPL_TPL_)ACPIGEN) += acpi_nhlt.o +obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi_nhlt.o obj-y += northbridge-uclass.o obj-$(CONFIG_I8259_PIC) += i8259.o obj-$(CONFIG_I8254_TIMER) += i8254.o @@ -44,7 +44,7 @@ obj-y += acpi.o obj-$(CONFIG_HAVE_ACPI_RESUME) += acpi_s3.o ifndef CONFIG_QEMU obj-y += acpigen.o -obj-$(CONFIG_$(SPL_TPL_)GENERATE_ACPI_TABLE) += acpi_table.o +obj-$(CONFIG_$(PHASE_)GENERATE_ACPI_TABLE) += acpi_table.o endif obj-y += tables.o ifndef CONFIG_XPL_BUILD diff --git a/board/coreboot/coreboot/Makefile b/board/coreboot/coreboot/Makefile index 75bfbd18943..0abdb7df534 100644 --- a/board/coreboot/coreboot/Makefile +++ b/board/coreboot/coreboot/Makefile @@ -11,4 +11,4 @@ # Daniel Engström, Omicron Ceti AB, daniel@omicron.se.

obj-y += coreboot.o -obj-$(CONFIG_$(SPL_TPL_)SMBIOS_PARSER) += sysinfo.o +obj-$(CONFIG_$(PHASE_)SMBIOS_PARSER) += sysinfo.o diff --git a/boot/Makefile b/boot/Makefile index 1b6901970e3..b24f806d5bf 100644 --- a/boot/Makefile +++ b/boot/Makefile @@ -19,54 +19,54 @@ obj-y += image.o image-board.o obj-$(CONFIG_ANDROID_AB) += android_ab.o obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o image-android-dt.o

-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootdev-uclass.o -obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootflow.o -obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootmeth-uclass.o -obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootstd-uclass.o - -obj-$(CONFIG_$(SPL_TPL_)BOOTSTD_PROG) += prog_boot.o - -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EXTLINUX) += bootmeth_extlinux.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EXTLINUX_PXE) += bootmeth_pxe.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EFILOADER) += bootmeth_efi.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_CROS) += bootm.o bootm_os.o bootmeth_cros.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_QFW) += bootmeth_qfw.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_SANDBOX) += bootmeth_sandbox.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_SCRIPT) += bootmeth_script.o -obj-$(CONFIG_$(SPL_TPL_)CEDIT) += cedit.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EFI_BOOTMGR) += bootmeth_efi_mgr.o -ifdef CONFIG_$(SPL_TPL_)BOOTSTD_FULL -obj-$(CONFIG_$(SPL_TPL_)EXPO) += bootflow_menu.o -obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootflow_menu.o +obj-$(CONFIG_$(PHASE_)BOOTSTD) += bootdev-uclass.o +obj-$(CONFIG_$(PHASE_)BOOTSTD) += bootflow.o +obj-$(CONFIG_$(PHASE_)BOOTSTD) += bootmeth-uclass.o +obj-$(CONFIG_$(PHASE_)BOOTSTD) += bootstd-uclass.o + +obj-$(CONFIG_$(PHASE_)BOOTSTD_PROG) += prog_boot.o + +obj-$(CONFIG_$(PHASE_)BOOTMETH_EXTLINUX) += bootmeth_extlinux.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_EXTLINUX_PXE) += bootmeth_pxe.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_EFILOADER) += bootmeth_efi.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_CROS) += bootm.o bootm_os.o bootmeth_cros.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_QFW) += bootmeth_qfw.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_SANDBOX) += bootmeth_sandbox.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_SCRIPT) += bootmeth_script.o +obj-$(CONFIG_$(PHASE_)CEDIT) += cedit.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_EFI_BOOTMGR) += bootmeth_efi_mgr.o +ifdef CONFIG_$(PHASE_)BOOTSTD_FULL +obj-$(CONFIG_$(PHASE_)EXPO) += bootflow_menu.o +obj-$(CONFIG_$(PHASE_)BOOTSTD) += bootflow_menu.o endif

-obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o -obj-$(CONFIG_$(SPL_TPL_)FDT_SIMPLEFB) += fdt_simplefb.o +obj-$(CONFIG_$(PHASE_)OF_LIBFDT) += fdt_support.o +obj-$(CONFIG_$(PHASE_)FDT_SIMPLEFB) += fdt_simplefb.o

-obj-$(CONFIG_$(SPL_TPL_)UPL) += upl_common.o -obj-$(CONFIG_$(SPL_TPL_)UPL_READ) += upl_read.o -obj-$(CONFIG_$(SPL_TPL_)UPL_WRITE) += upl_write.o +obj-$(CONFIG_$(PHASE_)UPL) += upl_common.o +obj-$(CONFIG_$(PHASE_)UPL_READ) += upl_read.o +obj-$(CONFIG_$(PHASE_)UPL_WRITE) += upl_write.o

-obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o -obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += fdt_region.o -obj-$(CONFIG_$(SPL_TPL_)FIT) += image-fit.o +obj-$(CONFIG_$(PHASE_)OF_LIBFDT) += image-fdt.o +obj-$(CONFIG_$(PHASE_)FIT_SIGNATURE) += fdt_region.o +obj-$(CONFIG_$(PHASE_)FIT) += image-fit.o obj-$(CONFIG_$(XPL_)MULTI_DTB_FIT) += boot_fit.o common_fit.o -obj-$(CONFIG_$(SPL_TPL_)IMAGE_PRE_LOAD) += image-pre-load.o -obj-$(CONFIG_$(SPL_TPL_)IMAGE_SIGN_INFO) += image-sig.o -obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += image-fit-sig.o -obj-$(CONFIG_$(SPL_TPL_)FIT_CIPHER) += image-cipher.o +obj-$(CONFIG_$(PHASE_)IMAGE_PRE_LOAD) += image-pre-load.o +obj-$(CONFIG_$(PHASE_)IMAGE_SIGN_INFO) += image-sig.o +obj-$(CONFIG_$(PHASE_)FIT_SIGNATURE) += image-fit-sig.o +obj-$(CONFIG_$(PHASE_)FIT_CIPHER) += image-cipher.o

obj-$(CONFIG_CMD_ADTIMG) += image-android-dt.o

-obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += common_fit.o +obj-$(CONFIG_$(PHASE_)LOAD_FIT) += common_fit.o

-obj-$(CONFIG_$(SPL_TPL_)EXPO) += expo.o scene.o expo_build.o -obj-$(CONFIG_$(SPL_TPL_)EXPO) += scene_menu.o scene_textline.o +obj-$(CONFIG_$(PHASE_)EXPO) += expo.o scene.o expo_build.o +obj-$(CONFIG_$(PHASE_)EXPO) += scene_menu.o scene_textline.o

-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE) += vbe.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE_REQUEST) += vbe_request.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE_SIMPLE) += vbe_simple.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE_SIMPLE_FW) += vbe_simple_fw.o -obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE_SIMPLE_OS) += vbe_simple_os.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_VBE) += vbe.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_VBE_REQUEST) += vbe_request.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_VBE_SIMPLE) += vbe_simple.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_VBE_SIMPLE_FW) += vbe_simple_fw.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_VBE_SIMPLE_OS) += vbe_simple_os.o

-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_ANDROID) += bootmeth_android.o +obj-$(CONFIG_$(PHASE_)BOOTMETH_ANDROID) += bootmeth_android.o diff --git a/common/Makefile b/common/Makefile index ae8984659c0..2ee5ef9cc6e 100644 --- a/common/Makefile +++ b/common/Makefile @@ -44,8 +44,8 @@ obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o

endif # !CONFIG_XPL_BUILD

-obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o -obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o +obj-$(CONFIG_$(PHASE_)BOOTSTAGE) += bootstage.o +obj-$(CONFIG_$(PHASE_)BLOBLIST) += bloblist.o

ifdef CONFIG_XPL_BUILD ifdef CONFIG_SPL_DFU @@ -65,16 +65,16 @@ obj-$(CONFIG_DDR_SPD) += ddr_spd.o obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o obj-$(CONFIG_HWCONFIG) += hwconfig.o obj-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o -obj-$(CONFIG_$(SPL_TPL_)SERIAL) += console.o +obj-$(CONFIG_$(PHASE_)SERIAL) += console.o

obj-$(CONFIG_CROS_EC) += cros_ec.o obj-y += dlmalloc.o -obj-$(CONFIG_$(SPL_TPL_)SYS_MALLOC_F) += malloc_simple.o +obj-$(CONFIG_$(PHASE_)SYS_MALLOC_F) += malloc_simple.o

-obj-$(CONFIG_$(SPL_TPL_)CYCLIC) += cyclic.o -obj-$(CONFIG_$(SPL_TPL_)EVENT) += event.o +obj-$(CONFIG_$(PHASE_)CYCLIC) += cyclic.o +obj-$(CONFIG_$(PHASE_)EVENT) += event.o

-obj-$(CONFIG_$(SPL_TPL_)HASH) += hash.o +obj-$(CONFIG_$(PHASE_)HASH) += hash.o obj-$(CONFIG_IO_TRACE) += iotrace.o obj-y += memsize.o obj-y += stdio.o @@ -88,15 +88,15 @@ obj-$(CONFIG_FSL_DDR_INTERACTIVE) += cli_getch.o cli_simple.o cli_readline.o obj-$(CONFIG_STM32MP1_DDR_INTERACTIVE) += cli_getch.o cli_simple.o cli_readline.o obj-$(CONFIG_DFU_OVER_USB) += dfu.o obj-y += command.o -obj-$(CONFIG_$(SPL_TPL_)LOG) += log.o -obj-$(CONFIG_$(SPL_TPL_)LOG_CONSOLE) += log_console.o -obj-$(CONFIG_$(SPL_TPL_)LOG_SYSLOG) += log_syslog.o +obj-$(CONFIG_$(PHASE_)LOG) += log.o +obj-$(CONFIG_$(PHASE_)LOG_CONSOLE) += log_console.o +obj-$(CONFIG_$(PHASE_)LOG_SYSLOG) += log_syslog.o obj-y += s_record.o obj-$(CONFIG_CMD_LOADB) += xyzModem.o -obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += xyzModem.o +obj-$(CONFIG_$(PHASE_)YMODEM_SUPPORT) += xyzModem.o

-obj-$(CONFIG_$(SPL_TPL_)AVB_VERIFY) += avb_verify.o -obj-$(CONFIG_$(SPL_TPL_)STACKPROTECTOR) += stackprot.o +obj-$(CONFIG_$(PHASE_)AVB_VERIFY) += avb_verify.o +obj-$(CONFIG_$(PHASE_)STACKPROTECTOR) += stackprot.o obj-$(CONFIG_SCP03) += scp03.o

obj-$(CONFIG_QFW) += qfw.o diff --git a/common/bootstage.c b/common/bootstage.c index dca33148192..dd6aed7c2fd 100644 --- a/common/bootstage.c +++ b/common/bootstage.c @@ -351,7 +351,7 @@ void bootstage_report(void) } if (data->rec_count > RECORD_COUNT) printf("Overflowed internal boot id table by %d entries\n" - "Please increase CONFIG_(SPL_TPL_)BOOTSTAGE_RECORD_COUNT\n", + "Please increase CONFIG_(PHASE_)BOOTSTAGE_RECORD_COUNT\n", data->rec_count - RECORD_COUNT);

puts("\nAccumulated time:\n"); @@ -473,7 +473,7 @@ int bootstage_unstash(const void *base, int size)

if (data->rec_count + hdr->count > RECORD_COUNT) { debug("%s: Bootstage has %d records, we have space for %d\n" - "Please increase CONFIG_(SPL_)BOOTSTAGE_RECORD_COUNT\n", + "Please increase CONFIG_(PHASE_)BOOTSTAGE_RECORD_COUNT\n", __func__, hdr->count, RECORD_COUNT - data->rec_count); return -ENOSPC; } diff --git a/common/init/Makefile b/common/init/Makefile index 853b56d1e57..224e092f88c 100644 --- a/common/init/Makefile +++ b/common/init/Makefile @@ -5,4 +5,4 @@ #

obj-y += board_init.o -obj-$(CONFIG_$(SPL_TPL_)HANDOFF) += handoff.o +obj-$(CONFIG_$(PHASE_)HANDOFF) += handoff.o diff --git a/common/spl/Makefile b/common/spl/Makefile index 10528b31a7c..75123eb666b 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -7,35 +7,35 @@ #

ifdef CONFIG_XPL_BUILD -obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o -obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o -obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o -obj-$(CONFIG_$(SPL_TPL_)BLK_FS) += spl_blk_fs.o -obj-$(CONFIG_$(SPL_TPL_)LEGACY_IMAGE_FORMAT) += spl_legacy.o -obj-$(CONFIG_$(SPL_TPL_)NOR_SUPPORT) += spl_nor.o -obj-$(CONFIG_$(SPL_TPL_)XIP_SUPPORT) += spl_xip.o -obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += spl_ymodem.o +obj-$(CONFIG_$(PHASE_)FRAMEWORK) += spl.o +obj-$(CONFIG_$(PHASE_)BOOTROM_SUPPORT) += spl_bootrom.o +obj-$(CONFIG_$(PHASE_)LOAD_FIT) += spl_fit.o +obj-$(CONFIG_$(PHASE_)BLK_FS) += spl_blk_fs.o +obj-$(CONFIG_$(PHASE_)LEGACY_IMAGE_FORMAT) += spl_legacy.o +obj-$(CONFIG_$(PHASE_)NOR_SUPPORT) += spl_nor.o +obj-$(CONFIG_$(PHASE_)XIP_SUPPORT) += spl_xip.o +obj-$(CONFIG_$(PHASE_)YMODEM_SUPPORT) += spl_ymodem.o ifndef CONFIG_SPL_UBI -obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += spl_nand.o -obj-$(CONFIG_$(SPL_TPL_)ONENAND_SUPPORT) += spl_onenand.o +obj-$(CONFIG_$(PHASE_)NAND_SUPPORT) += spl_nand.o +obj-$(CONFIG_$(PHASE_)ONENAND_SUPPORT) += spl_onenand.o endif -obj-$(CONFIG_$(SPL_TPL_)UBI) += spl_ubi.o -obj-$(CONFIG_$(SPL_TPL_)NET) += spl_net.o -obj-$(CONFIG_$(SPL_TPL_)MMC) += spl_mmc.o -obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o -obj-$(CONFIG_$(SPL_TPL_)OPTEE_IMAGE) += spl_optee.o -obj-$(CONFIG_$(SPL_TPL_)OPENSBI) += spl_opensbi.o -obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o -obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o -obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o -obj-$(CONFIG_$(SPL_TPL_)LOAD_IMX_CONTAINER) += spl_imx_container.o -obj-$(CONFIG_$(SPL_TPL_)SATA) += spl_sata.o -obj-$(CONFIG_$(SPL_TPL_)NVME) += spl_nvme.o -obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += spl_semihosting.o -obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o -obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o -obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o -obj-$(CONFIG_$(SPL_TPL_)USB_SDP_SUPPORT) += spl_sdp.o +obj-$(CONFIG_$(PHASE_)UBI) += spl_ubi.o +obj-$(CONFIG_$(PHASE_)NET) += spl_net.o +obj-$(CONFIG_$(PHASE_)MMC) += spl_mmc.o +obj-$(CONFIG_$(PHASE_)ATF) += spl_atf.o +obj-$(CONFIG_$(PHASE_)OPTEE_IMAGE) += spl_optee.o +obj-$(CONFIG_$(PHASE_)OPENSBI) += spl_opensbi.o +obj-$(CONFIG_$(PHASE_)USB_STORAGE) += spl_usb.o +obj-$(CONFIG_$(PHASE_)FS_FAT) += spl_fat.o +obj-$(CONFIG_$(PHASE_)FS_EXT4) += spl_ext.o +obj-$(CONFIG_$(PHASE_)LOAD_IMX_CONTAINER) += spl_imx_container.o +obj-$(CONFIG_$(PHASE_)SATA) += spl_sata.o +obj-$(CONFIG_$(PHASE_)NVME) += spl_nvme.o +obj-$(CONFIG_$(PHASE_)SEMIHOSTING) += spl_semihosting.o +obj-$(CONFIG_$(PHASE_)DFU) += spl_dfu.o +obj-$(CONFIG_$(PHASE_)SPI_LOAD) += spl_spi.o +obj-$(CONFIG_$(PHASE_)RAM_SUPPORT) += spl_ram.o +obj-$(CONFIG_$(PHASE_)USB_SDP_SUPPORT) += spl_sdp.o endif

-obj-$(CONFIG_$(SPL_TPL_)UPL) += spl_upl.o +obj-$(CONFIG_$(PHASE_)UPL) += spl_upl.o diff --git a/disk/Makefile b/disk/Makefile index 45588cf66e4..2248a659f8b 100644 --- a/disk/Makefile +++ b/disk/Makefile @@ -5,16 +5,16 @@

#ccflags-y += -DET_DEBUG -DDEBUG

-obj-$(CONFIG_$(SPL_TPL_)PARTITIONS) += part.o -ifdef CONFIG_$(SPL_TPL_)BLK -obj-$(CONFIG_$(SPL_TPL_)PARTITIONS) += disk-uclass.o +obj-$(CONFIG_$(PHASE_)PARTITIONS) += part.o +ifdef CONFIG_$(PHASE_)BLK +obj-$(CONFIG_$(PHASE_)PARTITIONS) += disk-uclass.o endif

# Must have BLK or SPL_LEGACY_BLOCK to support partitions -ifneq ($(CONFIG_$(SPL_TPL_)BLK),$(CONFIG_SPL_LEGACY_BLOCK),) -obj-$(CONFIG_$(SPL_TPL_)MAC_PARTITION) += part_mac.o -obj-$(CONFIG_$(SPL_TPL_)DOS_PARTITION) += part_dos.o -obj-$(CONFIG_$(SPL_TPL_)ISO_PARTITION) += part_iso.o -obj-$(CONFIG_$(SPL_TPL_)AMIGA_PARTITION) += part_amiga.o -obj-$(CONFIG_$(SPL_TPL_)EFI_PARTITION) += part_efi.o +ifneq ($(CONFIG_$(PHASE_)BLK),$(CONFIG_SPL_LEGACY_BLOCK),) +obj-$(CONFIG_$(PHASE_)MAC_PARTITION) += part_mac.o +obj-$(CONFIG_$(PHASE_)DOS_PARTITION) += part_dos.o +obj-$(CONFIG_$(PHASE_)ISO_PARTITION) += part_iso.o +obj-$(CONFIG_$(PHASE_)AMIGA_PARTITION) += part_amiga.o +obj-$(CONFIG_$(PHASE_)EFI_PARTITION) += part_efi.o endif diff --git a/drivers/Makefile b/drivers/Makefile index b44570fdb65..9440af1b09b 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -1,43 +1,43 @@ # SPDX-License-Identifier: GPL-2.0+

-obj-$(CONFIG_$(SPL_TPL_)ADC) += adc/ -obj-$(CONFIG_$(SPL_TPL_)BIOSEMU) += bios_emulator/ -obj-$(CONFIG_$(SPL_TPL_)BLK) += block/ -obj-$(CONFIG_$(SPL_TPL_)BOOTCOUNT_LIMIT) += bootcount/ -obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/ -obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/ -obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/ -obj-$(CONFIG_$(SPL_TPL_)DM) += core/ -obj-$(CONFIG_$(SPL_TPL_)DMA) += dma/ -obj-$(CONFIG_$(SPL_TPL_)DMA_LEGACY) += dma/ -obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/ -obj-$(CONFIG_$(SPL_TPL_)EXTCON) += extcon/ -obj-$(CONFIG_$(SPL_TPL_)GPIO) += gpio/ -obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC) += misc/ -obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/ -obj-$(CONFIG_$(SPL_TPL_)FIRMWARE) +=firmware/ -obj-$(CONFIG_$(SPL_TPL_)I2C) += i2c/ -obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/ -obj-$(CONFIG_$(SPL_TPL_)LED) += led/ -obj-$(CONFIG_$(SPL_TPL_)MMC) += mmc/ +obj-$(CONFIG_$(PHASE_)ADC) += adc/ +obj-$(CONFIG_$(PHASE_)BIOSEMU) += bios_emulator/ +obj-$(CONFIG_$(PHASE_)BLK) += block/ +obj-$(CONFIG_$(PHASE_)BOOTCOUNT_LIMIT) += bootcount/ +obj-$(CONFIG_$(PHASE_)BUTTON) += button/ +obj-$(CONFIG_$(PHASE_)CACHE) += cache/ +obj-$(CONFIG_$(PHASE_)CLK) += clk/ +obj-$(CONFIG_$(PHASE_)DM) += core/ +obj-$(CONFIG_$(PHASE_)DMA) += dma/ +obj-$(CONFIG_$(PHASE_)DMA_LEGACY) += dma/ +obj-$(CONFIG_$(PHASE_)DFU) += dfu/ +obj-$(CONFIG_$(PHASE_)EXTCON) += extcon/ +obj-$(CONFIG_$(PHASE_)GPIO) += gpio/ +obj-$(CONFIG_$(PHASE_)DRIVERS_MISC) += misc/ +obj-$(CONFIG_$(PHASE_)SYSRESET) += sysreset/ +obj-$(CONFIG_$(PHASE_)FIRMWARE) +=firmware/ +obj-$(CONFIG_$(PHASE_)I2C) += i2c/ +obj-$(CONFIG_$(PHASE_)INPUT) += input/ +obj-$(CONFIG_$(PHASE_)LED) += led/ +obj-$(CONFIG_$(PHASE_)MMC) += mmc/ obj-y += mtd/ -obj-$(CONFIG_$(SPL_TPL_)ETH) += net/ -obj-$(CONFIG_$(SPL_TPL_)PCH) += pch/ -obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/ -obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/ -obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/ -obj-$(CONFIG_$(SPL_TPL_)POWER) += power/ -obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/ -obj-$(CONFIG_$(SPL_TPL_)RTC) += rtc/ -obj-$(CONFIG_$(SPL_TPL_)SERIAL) += serial/ -obj-$(CONFIG_$(SPL_TPL_)SPI) += spi/ -obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/ -obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/ +obj-$(CONFIG_$(PHASE_)ETH) += net/ +obj-$(CONFIG_$(PHASE_)PCH) += pch/ +obj-$(CONFIG_$(PHASE_)PCI) += pci/ +obj-$(CONFIG_$(PHASE_)PHY) += phy/ +obj-$(CONFIG_$(PHASE_)PINCTRL) += pinctrl/ +obj-$(CONFIG_$(PHASE_)POWER) += power/ +obj-$(CONFIG_$(PHASE_)RAM) += ram/ +obj-$(CONFIG_$(PHASE_)RTC) += rtc/ +obj-$(CONFIG_$(PHASE_)SERIAL) += serial/ +obj-$(CONFIG_$(PHASE_)SPI) += spi/ +obj-$(CONFIG_$(PHASE_)TIMER) += timer/ +obj-$(CONFIG_$(PHASE_)VIRTIO) += virtio/ obj-$(CONFIG_$(XPL_)DM_MAILBOX) += mailbox/ obj-$(CONFIG_$(XPL_)REMOTEPROC) += remoteproc/ obj-$(CONFIG_$(XPL_)SYSINFO) += sysinfo/ -obj-$(CONFIG_$(SPL_TPL_)SM) += sm/ -obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/ +obj-$(CONFIG_$(PHASE_)SM) += sm/ +obj-$(CONFIG_$(PHASE_)TPM) += tpm/ obj-$(CONFIG_$(XPL_)NVME) += nvme/ obj-$(CONFIG_XEN) += xen/ obj-$(CONFIG_$(XPL_)FPGA) += fpga/ @@ -126,7 +126,7 @@ obj-$(CONFIG_W1_EEPROM) += w1-eeprom/ obj-$(CONFIG_MACH_PIC32) += ddr/microchip/ obj-$(CONFIG_FUZZ) += fuzz/ obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/ -obj-$(CONFIG_$(SPL_TPL_)DM_RNG) += rng/ +obj-$(CONFIG_$(PHASE_)DM_RNG) += rng/ endif

obj-y += soc/ diff --git a/drivers/adc/Makefile b/drivers/adc/Makefile index dca0b39c2e2..665a7965412 100644 --- a/drivers/adc/Makefile +++ b/drivers/adc/Makefile @@ -4,7 +4,7 @@ # Przemyslaw Marczak p.marczak@samsung.com #

-obj-$(CONFIG_$(SPL_TPL_)ADC) += adc-uclass.o +obj-$(CONFIG_$(PHASE_)ADC) += adc-uclass.o obj-$(CONFIG_ADC_EXYNOS) += exynos-adc.o obj-$(CONFIG_ADC_SANDBOX) += sandbox.o obj-$(CONFIG_SARADC_ROCKCHIP) += rockchip-saradc.o diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 98a34c01c38..ee290620545 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-obj-$(CONFIG_$(SPL_TPL_)BLK) += blk-uclass.o +obj-$(CONFIG_$(PHASE_)BLK) += blk-uclass.o

ifndef CONFIG_$(XPL_)BLK obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o @@ -14,9 +14,9 @@ obj-$(CONFIG_IDE) += ide.o obj-$(CONFIG_RKMTD) += rkmtd.o endif obj-$(CONFIG_SANDBOX) += sandbox.o host-uclass.o host_dev.o -obj-$(CONFIG_$(SPL_TPL_)BLOCK_CACHE) += blkcache.o -obj-$(CONFIG_$(SPL_TPL_)BLKMAP) += blkmap.o -obj-$(CONFIG_$(SPL_TPL_)BLKMAP) += blkmap_helper.o +obj-$(CONFIG_$(PHASE_)BLOCK_CACHE) += blkcache.o +obj-$(CONFIG_$(PHASE_)BLKMAP) += blkmap.o +obj-$(CONFIG_$(PHASE_)BLKMAP) += blkmap_helper.o

obj-$(CONFIG_EFI_MEDIA) += efi-media-uclass.o obj-$(CONFIG_EFI_MEDIA_SANDBOX) += sb_efi_media.o diff --git a/drivers/cache/Makefile b/drivers/cache/Makefile index e1b71e0ed51..2f683866b87 100644 --- a/drivers/cache/Makefile +++ b/drivers/cache/Makefile @@ -1,5 +1,5 @@

-obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache-uclass.o +obj-$(CONFIG_$(PHASE_)CACHE) += cache-uclass.o obj-$(CONFIG_SANDBOX) += sandbox_cache.o obj-$(CONFIG_L2X0_CACHE) += cache-l2x0.o obj-$(CONFIG_NCORE_CACHE) += cache-ncore.o diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f9b90a38b00..7f84f22d4b1 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -4,13 +4,13 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. #

-obj-$(CONFIG_$(SPL_TPL_)CLK) += clk-uclass.o -obj-$(CONFIG_$(SPL_TPL_)CLK) += clk_fixed_rate.o -obj-$(CONFIG_$(SPL_TPL_)CLK) += clk_fixed_factor.o -obj-$(CONFIG_$(SPL_TPL_)CLK_CCF) += clk.o clk-divider.o clk-mux.o clk-gate.o -obj-$(CONFIG_$(SPL_TPL_)CLK_CCF) += clk-fixed-factor.o -obj-$(CONFIG_$(SPL_TPL_)CLK_COMPOSITE_CCF) += clk-composite.o -obj-$(CONFIG_$(SPL_TPL_)CLK_GPIO) += clk-gpio.o +obj-$(CONFIG_$(PHASE_)CLK) += clk-uclass.o +obj-$(CONFIG_$(PHASE_)CLK) += clk_fixed_rate.o +obj-$(CONFIG_$(PHASE_)CLK) += clk_fixed_factor.o +obj-$(CONFIG_$(PHASE_)CLK_CCF) += clk.o clk-divider.o clk-mux.o clk-gate.o +obj-$(CONFIG_$(PHASE_)CLK_CCF) += clk-fixed-factor.o +obj-$(CONFIG_$(PHASE_)CLK_COMPOSITE_CCF) += clk-composite.o +obj-$(CONFIG_$(PHASE_)CLK_GPIO) += clk-gpio.o

obj-y += adi/ obj-y += analogbits/ @@ -18,7 +18,7 @@ obj-y += imx/ obj-$(CONFIG_CLK_JH7110) += starfive/ obj-y += tegra/ obj-y += ti/ -obj-$(CONFIG_$(SPL_TPL_)CLK_INTEL) += intel/ +obj-$(CONFIG_$(PHASE_)CLK_INTEL) += intel/ obj-$(CONFIG_ARCH_ASPEED) += aspeed/ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ obj-$(CONFIG_ARCH_MESON) += meson/ @@ -42,7 +42,7 @@ obj-$(CONFIG_CLK_OCTEON) += clk_octeon.o obj-$(CONFIG_CLK_OWL) += owl/ obj-$(CONFIG_CLK_QCOM) += qcom/ obj-$(CONFIG_CLK_RENESAS) += renesas/ -obj-$(CONFIG_$(SPL_TPL_)CLK_SCMI) += clk_scmi.o +obj-$(CONFIG_$(PHASE_)CLK_SCMI) += clk_scmi.o obj-$(CONFIG_CLK_SIFIVE) += sifive/ obj-$(CONFIG_CLK_SOPHGO) += sophgo/ obj-$(CONFIG_CLK_SUNXI) += sunxi/ diff --git a/drivers/clk/exynos/Makefile b/drivers/clk/exynos/Makefile index 734100e2bff..77385864fef 100644 --- a/drivers/clk/exynos/Makefile +++ b/drivers/clk/exynos/Makefile @@ -7,6 +7,6 @@ # Thomas Abraham thomas.ab@samsung.com # Sam Protsenko semen.protsenko@linaro.org

-obj-$(CONFIG_$(SPL_TPL_)CLK_CCF) += clk.o clk-pll.o +obj-$(CONFIG_$(PHASE_)CLK_CCF) += clk.o clk-pll.o obj-$(CONFIG_CLK_EXYNOS7420) += clk-exynos7420.o obj-$(CONFIG_CLK_EXYNOS850) += clk-exynos850.o diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile index 6d4bcd35714..a89ee7acb12 100644 --- a/drivers/clk/imx/Makefile +++ b/drivers/clk/imx/Makefile @@ -2,25 +2,25 @@ # # SPDX-License-Identifier: GPL-2.0

-obj-$(CONFIG_$(SPL_TPL_)CLK_CCF) += clk-gate2.o clk-pllv3.o clk-pfd.o -obj-$(CONFIG_$(SPL_TPL_)CLK_IMX6Q) += clk-imx6q.o +obj-$(CONFIG_$(PHASE_)CLK_CCF) += clk-gate2.o clk-pllv3.o clk-pfd.o +obj-$(CONFIG_$(PHASE_)CLK_IMX6Q) += clk-imx6q.o obj-$(CONFIG_CLK_IMX8) += clk-imx8.o

ifdef CONFIG_CLK_IMX8 obj-$(CONFIG_IMX8QXP) += clk-imx8qxp.o obj-$(CONFIG_IMX8QM) += clk-imx8qm.o endif -obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MM) += clk-imx8mm.o clk-pll14xx.o \ +obj-$(CONFIG_$(PHASE_)CLK_IMX8MM) += clk-imx8mm.o clk-pll14xx.o \ clk-composite-8m.o -obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MN) += clk-imx8mn.o clk-pll14xx.o \ +obj-$(CONFIG_$(PHASE_)CLK_IMX8MN) += clk-imx8mn.o clk-pll14xx.o \ clk-composite-8m.o -obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MP) += clk-imx8mp.o clk-pll14xx.o \ +obj-$(CONFIG_$(PHASE_)CLK_IMX8MP) += clk-imx8mp.o clk-pll14xx.o \ clk-composite-8m.o -obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MQ) += clk-imx8mq.o clk-pll14xx.o \ +obj-$(CONFIG_$(PHASE_)CLK_IMX8MQ) += clk-imx8mq.o clk-pll14xx.o \ clk-composite-8m.o -obj-$(CONFIG_$(SPL_TPL_)CLK_IMX93) += clk-imx93.o clk-fracn-gppll.o \ +obj-$(CONFIG_$(PHASE_)CLK_IMX93) += clk-imx93.o clk-fracn-gppll.o \ clk-gate-93.o clk-composite-93.o

-obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1020) += clk-imxrt1020.o -obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1050) += clk-imxrt1050.o -obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1170) += clk-imxrt1170.o +obj-$(CONFIG_$(PHASE_)CLK_IMXRT1020) += clk-imxrt1020.o +obj-$(CONFIG_$(PHASE_)CLK_IMXRT1050) += clk-imxrt1050.o +obj-$(CONFIG_$(PHASE_)CLK_IMXRT1170) += clk-imxrt1170.o diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 07aa9a53e08..a58f19f46d9 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -11,5 +11,5 @@ obj-$(CONFIG_CLK_TI_DIVIDER) += clk-divider.o obj-$(CONFIG_CLK_TI_GATE) += clk-gate.o obj-$(CONFIG_CLK_TI_MUX) += clk-mux.o obj-$(CONFIG_CLK_TI_SCI) += clk-sci.o -obj-$(CONFIG_$(SPL_TPL_)CLK_K3_PLL) += clk-k3-pll.o -obj-$(CONFIG_$(SPL_TPL_)CLK_K3) += clk-k3.o +obj-$(CONFIG_$(PHASE_)CLK_K3_PLL) += clk-k3-pll.o +obj-$(CONFIG_$(PHASE_)CLK_K3) += clk-k3.o diff --git a/drivers/core/Makefile b/drivers/core/Makefile index 20dbff6f956..9ea57911f89 100644 --- a/drivers/core/Makefile +++ b/drivers/core/Makefile @@ -3,14 +3,14 @@ # Copyright (c) 2013 Google, Inc

obj-y += device.o fdtaddr.o lists.o root.o uclass.o util.o tag.o -obj-$(CONFIG_$(SPL_TPL_)ACPIGEN) += acpi.o -obj-$(CONFIG_$(SPL_TPL_)DEVRES) += devres.o -obj-$(CONFIG_$(SPL_TPL_)DM_DEVICE_REMOVE) += device-remove.o +obj-$(CONFIG_$(PHASE_)ACPIGEN) += acpi.o +obj-$(CONFIG_$(PHASE_)DEVRES) += devres.o +obj-$(CONFIG_$(PHASE_)DM_DEVICE_REMOVE) += device-remove.o obj-$(CONFIG_$(XPL_)SIMPLE_BUS) += simple-bus.o obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o obj-$(CONFIG_DM) += dump.o -obj-$(CONFIG_$(SPL_TPL_)REGMAP) += regmap.o -obj-$(CONFIG_$(SPL_TPL_)SYSCON) += syscon-uclass.o +obj-$(CONFIG_$(PHASE_)REGMAP) += regmap.o +obj-$(CONFIG_$(PHASE_)SYSCON) += syscon-uclass.o obj-$(CONFIG_$(XPL_)OF_LIVE) += of_access.o of_addr.o ifndef CONFIG_DM_DEV_READ_INLINE obj-$(CONFIG_OF_CONTROL) += read.o diff --git a/drivers/crypto/fsl/Makefile b/drivers/crypto/fsl/Makefile index 4fbce519a0b..965c4938c8c 100644 --- a/drivers/crypto/fsl/Makefile +++ b/drivers/crypto/fsl/Makefile @@ -6,6 +6,6 @@ obj-y += sec.o obj-$(CONFIG_FSL_CAAM) += jr.o fsl_hash.o jobdesc.o error.o obj-$(CONFIG_CMD_BLOB)$(CONFIG_IMX_CAAM_DEK_ENCAP) += fsl_blob.o obj-$(CONFIG_RSA_FREESCALE_EXP) += fsl_rsa.o -obj-$(CONFIG_$(SPL_TPL_)FSL_CAAM_RNG) += rng.o +obj-$(CONFIG_$(PHASE_)FSL_CAAM_RNG) += rng.o obj-$(CONFIG_FSL_DCP_RNG) += dcp_rng.o obj-$(CONFIG_FSL_MFGPROT) += fsl_mfgprot.o diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 24d1b0394fb..21b4325e4f9 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_DWAPB_GPIO) += dwapb_gpio.o obj-$(CONFIG_AXP_GPIO) += axp_gpio.o obj-$(CONFIG_DM_74X164) += 74x164_gpio.o endif -obj-$(CONFIG_$(SPL_TPL_)DM_GPIO) += gpio-uclass.o +obj-$(CONFIG_$(PHASE_)DM_GPIO) += gpio-uclass.o

obj-$(CONFIG_$(XPL_)DM_PCA953X) += pca953x_gpio.o

@@ -24,7 +24,7 @@ obj-$(CONFIG_INTEL_ICH6_GPIO) += intel_ich6_gpio.o obj-$(CONFIG_INTEL_BROADWELL_GPIO) += intel_broadwell_gpio.o obj-$(CONFIG_IPROC_GPIO) += iproc_gpio.o obj-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o -obj-$(CONFIG_$(SPL_TPL_)MCP230XX_GPIO) += mcp230xx_gpio.o +obj-$(CONFIG_$(PHASE_)MCP230XX_GPIO) += mcp230xx_gpio.o obj-$(CONFIG_MXC_GPIO) += mxc_gpio.o obj-$(CONFIG_MXS_GPIO) += mxs_gpio.o obj-$(CONFIG_NPCM_GPIO) += npcm_gpio.o @@ -63,7 +63,7 @@ obj-$(CONFIG_OCTEON_GPIO) += octeon_gpio.o obj-$(CONFIG_MVEBU_GPIO) += mvebu_gpio.o obj-$(CONFIG_MSM_GPIO) += msm_gpio.o obj-$(CONFIG_$(XPL_)PCF8575_GPIO) += pcf8575_gpio.o -obj-$(CONFIG_$(SPL_TPL_)QCOM_PMIC_GPIO) += qcom_pmic_gpio.o +obj-$(CONFIG_$(PHASE_)QCOM_PMIC_GPIO) += qcom_pmic_gpio.o obj-$(CONFIG_MT7620_GPIO) += mt7620_gpio.o obj-$(CONFIG_MT7621_GPIO) += mt7621_gpio.o obj-$(CONFIG_MSCC_SGPIO) += mscc_sgpio.o diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 3e855346bce..8d4107b8848 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -3,9 +3,9 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-obj-$(CONFIG_$(SPL_TPL_)CROS_EC_KEYB) += cros_ec_keyb.o -obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += key_matrix.o -obj-$(CONFIG_$(SPL_TPL_)DM_KEYBOARD) += input.o keyboard-uclass.o +obj-$(CONFIG_$(PHASE_)CROS_EC_KEYB) += cros_ec_keyb.o +obj-$(CONFIG_$(PHASE_)OF_CONTROL) += key_matrix.o +obj-$(CONFIG_$(PHASE_)DM_KEYBOARD) += input.o keyboard-uclass.o obj-$(CONFIG_BUTTON_KEYBOARD) += button_kbd.o

ifndef CONFIG_XPL_BUILD diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 794c2a2d38e..79e54c4a1b5 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -3,12 +3,12 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-obj-$(CONFIG_$(SPL_TPL_)MISC) += misc-uclass.o -obj-$(CONFIG_$(SPL_TPL_)NVMEM) += nvmem.o +obj-$(CONFIG_$(PHASE_)MISC) += misc-uclass.o +obj-$(CONFIG_$(PHASE_)NVMEM) += nvmem.o

-obj-$(CONFIG_$(SPL_TPL_)CROS_EC) += cros_ec.o -obj-$(CONFIG_$(SPL_TPL_)CROS_EC_SANDBOX) += cros_ec_sandbox.o -obj-$(CONFIG_$(SPL_TPL_)CROS_EC_LPC) += cros_ec_lpc.o +obj-$(CONFIG_$(PHASE_)CROS_EC) += cros_ec.o +obj-$(CONFIG_$(PHASE_)CROS_EC_SANDBOX) += cros_ec_sandbox.o +obj-$(CONFIG_$(PHASE_)CROS_EC_LPC) += cros_ec_lpc.o

ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SANDBOX) += sandbox_adder.o @@ -51,7 +51,7 @@ obj-$(CONFIG_IMX_ELE) += imx_ele/ obj-$(CONFIG_LED_STATUS) += status_led.o obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o -obj-$(CONFIG_$(SPL_TPL_)LS2_SFP) += ls2_sfp.o +obj-$(CONFIG_$(PHASE_)LS2_SFP) += ls2_sfp.o obj-$(CONFIG_$(XPL_)MXC_OCOTP) += mxc_ocotp.o obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o obj-$(CONFIG_NPCM_OTP) += npcm_otp.o @@ -70,7 +70,7 @@ obj-$(CONFIG_SANDBOX) += qfw_sandbox.o endif obj-$(CONFIG_ROCKCHIP_EFUSE) += rockchip-efuse.o obj-$(CONFIG_ROCKCHIP_OTP) += rockchip-otp.o -obj-$(CONFIG_$(SPL_TPL_)ROCKCHIP_IODOMAIN) += rockchip-io-domain.o +obj-$(CONFIG_$(PHASE_)ROCKCHIP_IODOMAIN) += rockchip-io-domain.o obj-$(CONFIG_SANDBOX) += syscon_sandbox.o misc_sandbox.o obj-$(CONFIG_SIFIVE_OTP) += sifive-otp.o obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o @@ -81,7 +81,7 @@ obj-$(CONFIG_SYS_DPAA_QBMAN) += fsl_portals.o obj-$(CONFIG_TEGRA186_BPMP) += tegra186_bpmp.o obj-$(CONFIG_TEGRA_CAR) += tegra_car.o obj-$(CONFIG_TEST_DRV) += test_drv.o -obj-$(CONFIG_$(SPL_TPL_)TURRIS_OMNIA_MCU) += turris_omnia_mcu.o +obj-$(CONFIG_$(PHASE_)TURRIS_OMNIA_MCU) += turris_omnia_mcu.o obj-$(CONFIG_TWL4030_LED) += twl4030_led.o obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress_config.o obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 328653b8823..868f3090ff2 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -6,11 +6,11 @@ obj-y += mmc.o obj-$(CONFIG_$(XPL_)DM_MMC) += mmc-uclass.o

-ifdef CONFIG_$(SPL_TPL_)DM_MMC -obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += mmc_bootdev.o +ifdef CONFIG_$(PHASE_)DM_MMC +obj-$(CONFIG_$(PHASE_)BOOTSTD) += mmc_bootdev.o endif

-obj-$(CONFIG_$(SPL_TPL_)MMC_WRITE) += mmc_write.o +obj-$(CONFIG_$(PHASE_)MMC_WRITE) += mmc_write.o obj-$(CONFIG_$(XPL_)MMC_PWRSEQ) += mmc-pwrseq.o obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o

diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index db010417b86..ce05e206073 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -34,9 +34,9 @@ else ifneq ($(mtd-y),) obj-$(CONFIG_SPL_MTD) += mtd.o endif -obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += nand/ +obj-$(CONFIG_$(PHASE_)NAND_SUPPORT) += nand/ obj-$(CONFIG_SPL_ONENAND_SUPPORT) += onenand/ -obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += spi/ +obj-$(CONFIG_$(PHASE_)SPI_FLASH_SUPPORT) += spi/ obj-$(CONFIG_SPL_UBI) += ubispl/

endif diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 68b53dced1b..c8169cf7390 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -6,5 +6,5 @@ obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o obj-$(CONFIG_MTD_RAW_NAND) += raw/ obj-$(CONFIG_MTD_SPI_NAND) += spi/ else -obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += raw/ +obj-$(CONFIG_$(PHASE_)NAND_SUPPORT) += raw/ endif diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index ca10ac7aecb..b47a3d787ce 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -18,7 +18,7 @@ obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o nand_amd.o nand_hynix.o \ nand_macronix.o nand_micron.o \ nand_samsung.o nand_toshiba.o obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o -obj-$(CONFIG_$(SPL_TPL_)NAND_INIT) += nand.o +obj-$(CONFIG_$(PHASE_)NAND_INIT) += nand.o ifeq ($(CONFIG_SPL_ENV_SUPPORT),y) obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o endif diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 2a287a62a47..44e67cd913a 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -3,12 +3,12 @@ # (C) Copyright 2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-obj-$(CONFIG_$(SPL_TPL_)DM_SPI_FLASH) += sf-uclass.o +obj-$(CONFIG_$(PHASE_)DM_SPI_FLASH) += sf-uclass.o spi-nor-y := sf_probe.o spi-nor-ids.o

ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o -ifeq ($(CONFIG_$(SPL_TPL_)SPI_FLASH_TINY),y) +ifeq ($(CONFIG_$(PHASE_)SPI_FLASH_TINY),y) spi-nor-y += spi-nor-tiny.o else spi-nor-y += spi-nor-core.o @@ -19,6 +19,6 @@ endif

obj-$(CONFIG_SPI_FLASH) += spi-nor.o obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o -obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_MTD) += sf_mtd.o +obj-$(CONFIG_$(PHASE_)SPI_FLASH_MTD) += sf_mtd.o obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o -obj-$(CONFIG_$(SPL_TPL_)BOOTDEV_SPI_FLASH) += sf_bootdev.o +obj-$(CONFIG_$(PHASE_)BOOTDEV_SPI_FLASH) += sf_bootdev.o diff --git a/drivers/pinctrl/starfive/Makefile b/drivers/pinctrl/starfive/Makefile index a4a12069b36..1503153ddc9 100644 --- a/drivers/pinctrl/starfive/Makefile +++ b/drivers/pinctrl/starfive/Makefile @@ -1,6 +1,6 @@

# SPDX-License-Identifier: GPL-2.0 # Core -obj-$(CONFIG_$(SPL_TPL_)PINCTRL_STARFIVE) += pinctrl-starfive.o +obj-$(CONFIG_$(PHASE_)PINCTRL_STARFIVE) += pinctrl-starfive.o # SoC Drivers -obj-$(CONFIG_$(SPL_TPL_)PINCTRL_STARFIVE_JH7110) += pinctrl-jh7110-sys.o pinctrl-jh7110-aon.o +obj-$(CONFIG_$(PHASE_)PINCTRL_STARFIVE_JH7110) += pinctrl-jh7110-sys.o pinctrl-jh7110-aon.o diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 5a987194cda..3f4d56f5139 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -3,8 +3,8 @@ # Copyright (c) 2009 Wind River Systems, Inc. # Tom Rix <Tom.Rix at windriver.com>

-obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += acpi_pmc/ -obj-$(CONFIG_$(SPL_TPL_)POWER_DOMAIN) += domain/ +obj-$(CONFIG_$(PHASE_)ACPI_PMC) += acpi_pmc/ +obj-$(CONFIG_$(PHASE_)POWER_DOMAIN) += domain/ obj-y += pmic/ obj-y += regulator/

@@ -23,9 +23,9 @@ obj-$(CONFIG_SY8106A_POWER) += sy8106a.o obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o obj-$(CONFIG_TWL4030_POWER) += twl4030.o obj-$(CONFIG_PALMAS_POWER) += palmas.o -obj-$(CONFIG_$(SPL_TPL_)POWER_LEGACY) += power_core.o +obj-$(CONFIG_$(PHASE_)POWER_LEGACY) += power_core.o obj-$(CONFIG_DIALOG_POWER) += power_dialog.o obj-$(CONFIG_POWER_FSL) += power_fsl.o -obj-$(CONFIG_$(SPL_TPL_)POWER_I2C) += power_i2c.o +obj-$(CONFIG_$(PHASE_)POWER_I2C) += power_i2c.o obj-$(CONFIG_POWER_SPI) += power_spi.o obj-$(CONFIG_POWER_MT6323) += mt6323.o diff --git a/drivers/power/acpi_pmc/Makefile b/drivers/power/acpi_pmc/Makefile index 0db52a65824..3259b397a9a 100644 --- a/drivers/power/acpi_pmc/Makefile +++ b/drivers/power/acpi_pmc/Makefile @@ -3,4 +3,4 @@ # Copyright 2019 Google LLC

obj-y += acpi-pmc-uclass.o -obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC_SANDBOX) += sandbox.o pmc_emul.o +obj-$(CONFIG_$(PHASE_)ACPI_PMC_SANDBOX) += sandbox.o pmc_emul.o diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index 48f7dd49ef8..bc138f563ff 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2012 Samsung Electronics # Lukasz Majewski l.majewski@samsung.com

-obj-$(CONFIG_$(SPL_TPL_)DM_PMIC) += pmic-uclass.o +obj-$(CONFIG_$(PHASE_)DM_PMIC) += pmic-uclass.o obj-$(CONFIG_$(XPL_)DM_PMIC_FAN53555) += fan53555.o obj-$(CONFIG_$(XPL_)DM_PMIC_DA9063) += da9063.o obj-$(CONFIG_$(XPL_)DM_PMIC_MAX77663) += max77663.o @@ -22,7 +22,7 @@ obj-$(CONFIG_PMIC_AS3722) += as3722.o as3722_gpio.o obj-$(CONFIG_$(XPL_)PMIC_AXP) += axp.o obj-$(CONFIG_PMIC_MAX8997) += max8997.o obj-$(CONFIG_PMIC_QCOM) += pmic_qcom.o -obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o +obj-$(CONFIG_$(PHASE_)PMIC_RK8XX) += rk8xx.o obj-$(CONFIG_$(XPL_)PMIC_RN5T567) += rn5t567.o obj-$(CONFIG_PMIC_TPS65090) += tps65090.o obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile index cac02aaa36f..ca6c89d13b5 100644 --- a/drivers/power/regulator/Makefile +++ b/drivers/power/regulator/Makefile @@ -22,7 +22,7 @@ obj-$(CONFIG_$(XPL_)DM_REGULATOR_COMMON) += regulator_common.o obj-$(CONFIG_$(XPL_)DM_REGULATOR_FIXED) += fixed.o obj-$(CONFIG_$(XPL_)DM_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_DM_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o -obj-$(CONFIG_$(SPL_TPL_)REGULATOR_RK8XX) += rk8xx.o +obj-$(CONFIG_$(PHASE_)REGULATOR_RK8XX) += rk8xx.o obj-$(CONFIG_DM_REGULATOR_S2MPS11) += s2mps11_regulator.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_DM_REGULATOR_SANDBOX) += sandbox.o diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile index 35d8f5761e1..f92e86eaa3f 100644 --- a/drivers/ram/Makefile +++ b/drivers/ram/Makefile @@ -3,7 +3,7 @@ # Copyright (c) 2015 Google, Inc # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # -obj-$(CONFIG_$(SPL_TPL_)DM) += ram-uclass.o +obj-$(CONFIG_$(PHASE_)DM) += ram-uclass.o obj-$(CONFIG_MPC83XX_SDRAM) += mpc83xx_sdram.o obj-$(CONFIG_SANDBOX) += sandbox_ram.o obj-$(CONFIG_STM32MP1_DDR) += stm32mp1/ diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 2eb639e4a65..d99a78c9828 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -32,4 +32,4 @@ obj-$(CONFIG_RESET_SCMI) += reset-scmi.o obj-$(CONFIG_RESET_ZYNQMP) += reset-zynqmp.o obj-$(CONFIG_RESET_DRA7) += reset-dra7.o obj-$(CONFIG_RESET_AT91) += reset-at91.o -obj-$(CONFIG_$(SPL_TPL_)RESET_JH7110) += reset-jh7110.o +obj-$(CONFIG_$(PHASE_)RESET_JH7110) += reset-jh7110.o diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile index 30553c9d6e9..30c58272d41 100644 --- a/drivers/rng/Makefile +++ b/drivers/rng/Makefile @@ -3,7 +3,7 @@ # Copyright (c) 2019, Linaro Limited #

-obj-$(CONFIG_$(SPL_TPL_)DM_RNG) += rng-uclass.o +obj-$(CONFIG_$(PHASE_)DM_RNG) += rng-uclass.o obj-$(CONFIG_RNG_MESON) += meson-rng.o obj-$(CONFIG_RNG_SANDBOX) += sandbox_rng.o obj-$(CONFIG_RNG_MSM) += msm_rng.o diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 03a424c31a5..99b5a2a346a 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -4,7 +4,7 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. #ccflags-y += -DDEBUG

-obj-$(CONFIG_$(SPL_TPL_)DM_RTC) += rtc-uclass.o +obj-$(CONFIG_$(PHASE_)DM_RTC) += rtc-uclass.o

obj-$(CONFIG_RTC_ARMADA38X) += armada38x.o obj-$(CONFIG_RTC_DAVINCI) += davinci.o @@ -17,7 +17,7 @@ obj-$(CONFIG_RTC_DS3232) += ds3232.o obj-$(CONFIG_RTC_EMULATION) += emul_rtc.o obj-$(CONFIG_RTC_GOLDFISH) += goldfish_rtc.o obj-$(CONFIG_RTC_HT1380) += ht1380.o -obj-$(CONFIG_$(SPL_TPL_)RTC_SANDBOX) += i2c_rtc_emul.o +obj-$(CONFIG_$(PHASE_)RTC_SANDBOX) += i2c_rtc_emul.o obj-$(CONFIG_RTC_ISL1208) += isl1208.o obj-$(CONFIG_RTC_M41T62) += m41t62.o obj-$(CONFIG_RTC_MAX313XX) += max313xx.o @@ -37,6 +37,6 @@ obj-$(CONFIG_RTC_RX8025) += rx8025.o obj-$(CONFIG_RTC_RX8010SJ) += rx8010sj.o obj-$(CONFIG_RTC_S35392A) += s35392a.o obj-$(CONFIG_RTC_STM32) += stm32_rtc.o -obj-$(CONFIG_$(SPL_TPL_)RTC_SANDBOX) += sandbox_rtc.o +obj-$(CONFIG_$(PHASE_)RTC_SANDBOX) += sandbox_rtc.o obj-$(CONFIG_RTC_ABX80X) += abx80x.o obj-$(CONFIG_RTC_ZYNQMP) += zynqmp_rtc.o diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 7c19a435722..b76de1b22a8 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -6,7 +6,7 @@ ifndef CONFIG_XPL_BUILD obj-$(CONFIG_SCSI) += scsi.o scsi-uclass.o ifdef CONFIG_SCSI -obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += scsi_bootdev.o +obj-$(CONFIG_$(PHASE_)BOOTSTD) += scsi_bootdev.o obj-$(CONFIG_SANDBOX) += sandbox_scsi.o obj-$(CONFIG_SANDBOX) += scsi_emul.o endif diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 1c0b013eb1f..ebe692a9963 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2006-2009 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-ifeq ($(CONFIG_$(SPL_TPL_)DM_SERIAL),y) +ifeq ($(CONFIG_$(PHASE_)DM_SERIAL),y) obj-y += serial-uclass.o else obj-y += serial.o diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 32d7bf7237a..7051e2a00c6 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -4,7 +4,7 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

# There are many options which enable SPI, so make this library available -ifdef CONFIG_$(SPL_TPL_)DM_SPI +ifdef CONFIG_$(PHASE_)DM_SPI obj-y += spi-uclass.o obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o obj-$(CONFIG_CADENCE_OSPI_VERSAL) += cadence_ospi_versal.o diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile index a6a0584585c..796fc9effa5 100644 --- a/drivers/sysreset/Makefile +++ b/drivers/sysreset/Makefile @@ -2,7 +2,7 @@ # # (C) Copyright 2016 Cadence Design Systems Inc.

-obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset-uclass.o +obj-$(CONFIG_$(PHASE_)SYSRESET) += sysreset-uclass.o obj-$(CONFIG_ARCH_ASPEED) += sysreset_ast.o obj-$(CONFIG_ARCH_ROCKCHIP) += sysreset_rockchip.o obj-$(CONFIG_ARCH_STI) += sysreset_sti.o @@ -10,24 +10,24 @@ obj-$(CONFIG_SANDBOX) += sysreset_sandbox.o obj-$(CONFIG_SYSRESET_CV1800B) += sysreset_cv1800b.o obj-$(CONFIG_POWEROFF_GPIO) += poweroff_gpio.o obj-$(CONFIG_SYSRESET_GPIO) += sysreset_gpio.o -obj-$(CONFIG_$(SPL_TPL_)SYSRESET_MAX77663) += sysreset_max77663.o +obj-$(CONFIG_$(PHASE_)SYSRESET_MAX77663) += sysreset_max77663.o obj-$(CONFIG_SYSRESET_MPC83XX) += sysreset_mpc83xx.o obj-$(CONFIG_SYSRESET_MICROBLAZE) += sysreset_microblaze.o obj-$(CONFIG_SYSRESET_OCTEON) += sysreset_octeon.o -obj-$(CONFIG_$(SPL_TPL_)SYSRESET_PALMAS) += sysreset_palmas.o +obj-$(CONFIG_$(PHASE_)SYSRESET_PALMAS) += sysreset_palmas.o obj-$(CONFIG_SYSRESET_PSCI) += sysreset_psci.o obj-$(CONFIG_SYSRESET_SBI) += sysreset_sbi.o obj-$(CONFIG_SYSRESET_SOCFPGA) += sysreset_socfpga.o obj-$(CONFIG_SYSRESET_SOCFPGA_SOC64) += sysreset_socfpga_soc64.o obj-$(CONFIG_SYSRESET_TEGRA) += sysreset_tegra.o obj-$(CONFIG_SYSRESET_TI_SCI) += sysreset-ti-sci.o -obj-$(CONFIG_$(SPL_TPL_)SYSRESET_TPS65910) += sysreset_tps65910.o -obj-$(CONFIG_$(SPL_TPL_)SYSRESET_TPS80031) += sysreset_tps80031.o +obj-$(CONFIG_$(PHASE_)SYSRESET_TPS65910) += sysreset_tps65910.o +obj-$(CONFIG_$(PHASE_)SYSRESET_TPS80031) += sysreset_tps80031.o obj-$(CONFIG_SYSRESET_SYSCON) += sysreset_syscon.o obj-$(CONFIG_SYSRESET_WATCHDOG) += sysreset_watchdog.o obj-$(CONFIG_SYSRESET_RESETCTL) += sysreset_resetctl.o -obj-$(CONFIG_$(SPL_TPL_)SYSRESET_AT91) += sysreset_at91.o -obj-$(CONFIG_$(SPL_TPL_)SYSRESET_X86) += sysreset_x86.o +obj-$(CONFIG_$(PHASE_)SYSRESET_AT91) += sysreset_at91.o +obj-$(CONFIG_$(PHASE_)SYSRESET_X86) += sysreset_x86.o obj-$(CONFIG_SYSRESET_RAA215300) += sysreset_raa215300.o obj-$(CONFIG_SYSRESET_QCOM_PSHOLD) += sysreset_qcom-pshold.o obj-$(CONFIG_TARGET_XTFPGA) += sysreset_xtfpga.o diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile index 9540fd7fe78..76e516dbbaf 100644 --- a/drivers/tpm/Makefile +++ b/drivers/tpm/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0+ # Copyright (c) 2011 The Chromium OS Authors. All rights reserved.

-obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm-uclass.o +obj-$(CONFIG_$(PHASE_)TPM) += tpm-uclass.o

obj-$(CONFIG_TPM_ATMEL_TWI) += tpm_atmel_twi.o obj-$(CONFIG_TPM_TIS_INFINEON) += tpm_tis_infineon.o @@ -10,7 +10,7 @@ obj-$(CONFIG_TPM_TIS_SANDBOX) += tpm_tis_sandbox.o sandbox_common.o obj-$(CONFIG_TPM_ST33ZP24_I2C) += tpm_tis_st33zp24_i2c.o obj-$(CONFIG_TPM_ST33ZP24_SPI) += tpm_tis_st33zp24_spi.o

-obj-$(CONFIG_$(SPL_TPL_)TPM2_CR50_I2C) += cr50_i2c.o +obj-$(CONFIG_$(PHASE_)TPM2_CR50_I2C) += cr50_i2c.o obj-$(CONFIG_TPM2_TIS_SANDBOX) += tpm2_tis_sandbox.o sandbox_common.o obj-$(CONFIG_TPM2_TIS_SPI) += tpm2_tis_core.o tpm2_tis_spi.o obj-$(CONFIG_TPM2_TIS_I2C) += tpm2_tis_core.o tpm2_tis_i2c.o diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 3158487cba4..a44b2bfc1f2 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -3,9 +3,9 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-obj-$(CONFIG_$(SPL_TPL_)USB_GADGET) += epautoconf.o config.o usbstring.o -obj-$(CONFIG_$(SPL_TPL_)USB_ETHER) += epautoconf.o config.o usbstring.o ether.o -obj-$(CONFIG_$(SPL_TPL_)USB_ETH_RNDIS) += rndis.o +obj-$(CONFIG_$(PHASE_)USB_GADGET) += epautoconf.o config.o usbstring.o +obj-$(CONFIG_$(PHASE_)USB_ETHER) += epautoconf.o config.o usbstring.o ether.o +obj-$(CONFIG_$(PHASE_)USB_ETH_RNDIS) += rndis.o

ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 07deb4fadd6..792956e647a 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -8,8 +8,8 @@ obj-y += usb-uclass.o obj-$(CONFIG_SANDBOX) += usb-sandbox.o endif

-ifdef CONFIG_$(SPL_TPL_)USB_STORAGE -obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += usb_bootdev.o +ifdef CONFIG_$(PHASE_)USB_STORAGE +obj-$(CONFIG_$(PHASE_)BOOTSTD) += usb_bootdev.o endif

# ohci diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 93fed8c491a..af8b2b266e2 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -4,12 +4,12 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

ifdef CONFIG_DM -obj-$(CONFIG_$(SPL_TPL_)BACKLIGHT) += backlight-uclass.o +obj-$(CONFIG_$(PHASE_)BACKLIGHT) += backlight-uclass.o obj-$(CONFIG_BACKLIGHT_GPIO) += backlight_gpio.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_backlight.o -obj-$(CONFIG_$(SPL_TPL_)CONSOLE_NORMAL) += console_normal.o +obj-$(CONFIG_$(PHASE_)CONSOLE_NORMAL) += console_normal.o obj-$(CONFIG_CONSOLE_ROTATION) += console_rotate.o -ifdef CONFIG_$(SPL_TPL_)CONSOLE_NORMAL +ifdef CONFIG_$(PHASE_)CONSOLE_NORMAL obj-y += console_core.o else ifdef CONFIG_CONSOLE_ROTATION obj-y += console_core.o @@ -18,14 +18,14 @@ obj-$(CONFIG_CONSOLE_ROTATION) += console_core.o obj-$(CONFIG_CONSOLE_TRUETYPE) += console_truetype.o fonts/ obj-$(CONFIG_DISPLAY) += display-uclass.o obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi-host-uclass.o -obj-$(CONFIG_$(SPL_TPL_)VIDEO) += video-uclass.o vidconsole-uclass.o -obj-$(CONFIG_$(SPL_TPL_)VIDEO) += video_bmp.o -obj-$(CONFIG_$(SPL_TPL_)PANEL) += panel-uclass.o +obj-$(CONFIG_$(PHASE_)VIDEO) += video-uclass.o vidconsole-uclass.o +obj-$(CONFIG_$(PHASE_)VIDEO) += video_bmp.o +obj-$(CONFIG_$(PHASE_)PANEL) += panel-uclass.o obj-$(CONFIG_PANEL_HX8238D) += hx8238d.o -obj-$(CONFIG_$(SPL_TPL_)SIMPLE_PANEL) += simple_panel.o +obj-$(CONFIG_$(PHASE_)SIMPLE_PANEL) += simple_panel.o

obj-$(CONFIG_VIDEO_LOGO) += u_boot_logo.o -obj-$(CONFIG_$(SPL_TPL_)BMP) += bmp.o +obj-$(CONFIG_$(PHASE_)BMP) += bmp.o

endif

diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 7b39adcf0ff..1639d827fee 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -14,7 +14,7 @@ obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o -obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o +obj-$(CONFIG_$(PHASE_)WDT) += wdt-uclass.o obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o obj-$(CONFIG_WDT_ALARM_SANDBOX) += sandbox_alarm-wdt.o obj-$(CONFIG_WDT_APPLE) += apple_wdt.o diff --git a/env/Makefile b/env/Makefile index c5145c1735f..a54e924d419 100644 --- a/env/Makefile +++ b/env/Makefile @@ -3,10 +3,10 @@ # (C) Copyright 2004-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += common.o -obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += env.o -obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += attr.o -obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += flags.o +obj-$(CONFIG_$(PHASE_)ENV_SUPPORT) += common.o +obj-$(CONFIG_$(PHASE_)ENV_SUPPORT) += env.o +obj-$(CONFIG_$(PHASE_)ENV_SUPPORT) += attr.o +obj-$(CONFIG_$(PHASE_)ENV_SUPPORT) += flags.o

ifndef CONFIG_XPL_BUILD obj-y += callback.o @@ -20,12 +20,12 @@ obj-$(CONFIG_ENV_IS_IN_REMOTE) += remote.o obj-$(CONFIG_ENV_IS_IN_UBI) += ubi.o endif

-obj-$(CONFIG_$(SPL_TPL_)ENV_IS_NOWHERE) += nowhere.o -obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_MMC) += mmc.o -obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_FAT) += fat.o -obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_EXT4) += ext4.o -obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_NAND) += nand.o -obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_SPI_FLASH) += sf.o -obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_FLASH) += flash.o +obj-$(CONFIG_$(PHASE_)ENV_IS_NOWHERE) += nowhere.o +obj-$(CONFIG_$(PHASE_)ENV_IS_IN_MMC) += mmc.o +obj-$(CONFIG_$(PHASE_)ENV_IS_IN_FAT) += fat.o +obj-$(CONFIG_$(PHASE_)ENV_IS_IN_EXT4) += ext4.o +obj-$(CONFIG_$(PHASE_)ENV_IS_IN_NAND) += nand.o +obj-$(CONFIG_$(PHASE_)ENV_IS_IN_SPI_FLASH) += sf.o +obj-$(CONFIG_$(PHASE_)ENV_IS_IN_FLASH) += flash.o

CFLAGS_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null) diff --git a/fs/sandbox/Makefile b/fs/sandbox/Makefile index 880d59dd693..54ad842d1fe 100644 --- a/fs/sandbox/Makefile +++ b/fs/sandbox/Makefile @@ -9,4 +9,4 @@ # Pavel Bartusek, Sysgo Real-Time Solutions AG, pba@sysgo.de

obj-y := sandboxfs.o -obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += host_bootdev.o +obj-$(CONFIG_$(PHASE_)BOOTSTD) += host_bootdev.o diff --git a/lib/Makefile b/lib/Makefile index 139476a4a23..7ccc91f5d33 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_OPTEE_LIB) += optee/

obj-$(CONFIG_AES) += aes.o obj-$(CONFIG_AES) += aes/ -obj-$(CONFIG_$(SPL_TPL_)BINMAN_FDT) += binman.o +obj-$(CONFIG_$(PHASE_)BINMAN_FDT) += binman.o

ifndef API_BUILD ifneq ($(CONFIG_CHARSET),) @@ -56,8 +56,8 @@ obj-$(CONFIG_BITREVERSE) += bitrev.o obj-y += list_sort.o endif

-obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm-common.o -ifeq ($(CONFIG_$(SPL_TPL_)TPM),y) +obj-$(CONFIG_$(PHASE_)TPM) += tpm-common.o +ifeq ($(CONFIG_$(PHASE_)TPM),y) obj-$(CONFIG_TPM) += tpm_api.o obj-$(CONFIG_TPM_V1) += tpm-v1.o obj-$(CONFIG_TPM_V2) += tpm-v2.o @@ -65,12 +65,12 @@ obj-$(CONFIG_EFI_TCG2_PROTOCOL) += tpm_tcg2.o obj-$(CONFIG_MEASURED_BOOT) += tpm_tcg2.o endif

-obj-$(CONFIG_$(SPL_TPL_)CRC8) += crc8.o -obj-$(CONFIG_$(SPL_TPL_)CRC16) += crc16.o +obj-$(CONFIG_$(PHASE_)CRC8) += crc8.o +obj-$(CONFIG_$(PHASE_)CRC16) += crc16.o

obj-y += crypto/

-obj-$(CONFIG_$(SPL_TPL_)ACPI) += acpi/ +obj-$(CONFIG_$(PHASE_)ACPI) += acpi/ obj-$(CONFIG_$(XPL_)MD5) += md5.o obj-$(CONFIG_ECDSA) += ecdsa/ obj-$(CONFIG_$(XPL_)RSA) += rsa/ @@ -93,12 +93,12 @@ obj-$(CONFIG_$(XPL_)LIB_RATIONAL) += rational.o

obj-$(CONFIG_LIBAVB) += libavb/

-obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/ -obj-$(CONFIG_$(SPL_TPL_)OF_REAL) += fdtdec_common.o fdtdec.o +obj-$(CONFIG_$(PHASE_)OF_LIBFDT) += libfdt/ +obj-$(CONFIG_$(PHASE_)OF_REAL) += fdtdec_common.o fdtdec.o

ifdef CONFIG_XPL_BUILD obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16-ccitt.o -obj-$(CONFIG_$(SPL_TPL_)HASH) += crc16-ccitt.o +obj-$(CONFIG_$(PHASE_)HASH) += crc16-ccitt.o obj-$(CONFIG_MMC_SPI_CRC_ON) += crc16-ccitt.o obj-y += net_utils.o endif @@ -110,15 +110,15 @@ obj-y += display_options.o CFLAGS_display_options.o := $(if $(BUILD_TAG),-DBUILD_TAG='"$(BUILD_TAG)"') obj-$(CONFIG_BCH) += bch.o obj-$(CONFIG_MMC_SPI) += crc7.o -obj-$(CONFIG_$(SPL_TPL_)CRC32) += crc32.o +obj-$(CONFIG_$(PHASE_)CRC32) += crc32.o obj-$(CONFIG_CRC32C) += crc32c.o obj-y += ctype.o obj-y += div64.o -obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdtdec.o fdtdec_common.o +obj-$(CONFIG_$(PHASE_)OF_LIBFDT) += fdtdec.o fdtdec_common.o obj-y += hang.o obj-y += linux_compat.o obj-y += linux_string.o -obj-$(CONFIG_$(SPL_TPL_)LMB) += lmb.o +obj-$(CONFIG_$(PHASE_)LMB) += lmb.o obj-y += membuff.o obj-$(CONFIG_REGEX) += slre.o obj-y += string.o @@ -133,12 +133,12 @@ obj-y += panic.o

ifeq ($(CONFIG_XPL_BUILD),y) # SPL U-Boot may use full-printf, tiny-printf or none at all -ifdef CONFIG_$(SPL_TPL_)USE_TINY_PRINTF -obj-$(CONFIG_$(SPL_TPL_)SPRINTF) += tiny-printf.o +ifdef CONFIG_$(PHASE_)USE_TINY_PRINTF +obj-$(CONFIG_$(PHASE_)SPRINTF) += tiny-printf.o else -obj-$(CONFIG_$(SPL_TPL_)SPRINTF) += vsprintf.o +obj-$(CONFIG_$(PHASE_)SPRINTF) += vsprintf.o endif -obj-$(CONFIG_$(SPL_TPL_)STRTO) += strto.o +obj-$(CONFIG_$(PHASE_)STRTO) += strto.o else # Main U-Boot always uses the full printf support obj-y += vsprintf.o strto.o @@ -152,7 +152,7 @@ obj-y += date.o obj-y += rtc-lib.o obj-$(CONFIG_LIB_ELF) += elf.o

-obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o +obj-$(CONFIG_$(PHASE_)SEMIHOSTING) += semihosting.o

# # Build a fast OID lookup registry from include/linux/oid_registry.h diff --git a/lib/acpi/Makefile b/lib/acpi/Makefile index 99be19adb4c..dcca0c67268 100644 --- a/lib/acpi/Makefile +++ b/lib/acpi/Makefile @@ -3,7 +3,7 @@

obj-y += acpi.o

-ifdef CONFIG_$(SPL_TPL_)GENERATE_ACPI_TABLE +ifdef CONFIG_$(PHASE_)GENERATE_ACPI_TABLE

obj-$(CONFIG_$(XPL_)ACPIGEN) += acpigen.o obj-$(CONFIG_$(XPL_)ACPIGEN) += acpi_device.o diff --git a/lib/libfdt/Makefile b/lib/libfdt/Makefile index 1fe50ecbe52..c492377032b 100644 --- a/lib/libfdt/Makefile +++ b/lib/libfdt/Makefile @@ -16,4 +16,4 @@ obj-y += \ obj-$(CONFIG_OF_LIBFDT_OVERLAY) += fdt_overlay.o

ccflags-y := -I$(srctree)/scripts/dtc/libfdt \ - -DFDT_ASSUME_MASK=$(CONFIG_$(SPL_TPL_)OF_LIBFDT_ASSUME_MASK) + -DFDT_ASSUME_MASK=$(CONFIG_$(PHASE_)OF_LIBFDT_ASSUME_MASK) diff --git a/lib/rsa/Makefile b/lib/rsa/Makefile index c9ac72c1e26..1f9b24001bf 100644 --- a/lib/rsa/Makefile +++ b/lib/rsa/Makefile @@ -5,6 +5,6 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.

-obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY) += rsa-verify.o -obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o +obj-$(CONFIG_$(PHASE_)RSA_VERIFY) += rsa-verify.o +obj-$(CONFIG_$(PHASE_)RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o diff --git a/net/Makefile b/net/Makefile index a1d37855593..a7075c36a04 100644 --- a/net/Makefile +++ b/net/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_CMD_CDP) += cdp.o obj-$(CONFIG_CMD_DNS) += dns.o obj-$(CONFIG_DM_DSA) += dsa-uclass.o obj-$(CONFIG_$(XPL_)DM_ETH) += eth-uclass.o -obj-$(CONFIG_$(SPL_TPL_)BOOTDEV_ETH) += eth_bootdev.o +obj-$(CONFIG_$(PHASE_)BOOTDEV_ETH) += eth_bootdev.o obj-$(CONFIG_DM_MDIO) += mdio-uclass.o obj-$(CONFIG_DM_MDIO_MUX) += mdio-mux-uclass.o obj-$(CONFIG_$(XPL_)DM_ETH) += eth_common.o @@ -27,8 +27,8 @@ obj-$(CONFIG_CMD_PCAP) += pcap.o obj-$(CONFIG_CMD_RARP) += rarp.o obj-$(CONFIG_CMD_SNTP) += sntp.o obj-$(CONFIG_CMD_TFTPBOOT) += tftp.o -obj-$(CONFIG_$(SPL_TPL_)UDP_FUNCTION_FASTBOOT) += fastboot_udp.o -obj-$(CONFIG_$(SPL_TPL_)TCP_FUNCTION_FASTBOOT) += fastboot_tcp.o +obj-$(CONFIG_$(PHASE_)UDP_FUNCTION_FASTBOOT) += fastboot_udp.o +obj-$(CONFIG_$(PHASE_)TCP_FUNCTION_FASTBOOT) += fastboot_tcp.o obj-$(CONFIG_CMD_WOL) += wol.o obj-$(CONFIG_PROT_UDP) += udp.o obj-$(CONFIG_PROT_TCP) += tcp.o diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 1a6b28feedf..edc91b24e45 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -327,15 +327,15 @@ endif ifdef CONFIG_XPL_BUILD XPL_ := SPL_ ifeq ($(CONFIG_VPL_BUILD),y) -SPL_TPL_ := VPL_ +PHASE_ := VPL_ else ifeq ($(CONFIG_TPL_BUILD),y) -SPL_TPL_ := TPL_ +PHASE_ := TPL_ else -SPL_TPL_ := SPL_ +PHASE_ := SPL_ endif endif else XPL_ := -SPL_TPL_ := +PHASE_ := endif diff --git a/scripts/Makefile.xpl b/scripts/Makefile.xpl index 11ae93f8556..dca5f4539d0 100644 --- a/scripts/Makefile.xpl +++ b/scripts/Makefile.xpl @@ -61,17 +61,17 @@ export SPL_NAME ifdef CONFIG_XPL_BUILD XPL_ := SPL_ ifeq ($(CONFIG_VPL_BUILD),y) -SPL_TPL_ := VPL_ +PHASE_ := VPL_ else ifeq ($(CONFIG_TPL_BUILD),y) -SPL_TPL_ := TPL_ +PHASE_ := TPL_ else -SPL_TPL_ := SPL_ +PHASE_ := SPL_ endif endif else XPL_ := -SPL_TPL_ := +PHASE_ := endif

ifeq ($(obj)$(CONFIG_SUPPORT_SPL),spl) @@ -93,7 +93,7 @@ include $(srctree)/scripts/Makefile.lib KBUILD_CFLAGS += -ffunction-sections -fdata-sections LDFLAGS_FINAL += --gc-sections

-ifeq ($(CONFIG_$(SPL_TPL_)STACKPROTECTOR),y) +ifeq ($(CONFIG_$(PHASE_)STACKPROTECTOR),y) KBUILD_CFLAGS += -fstack-protector-strong else KBUILD_CFLAGS += -fno-stack-protector @@ -117,8 +117,8 @@ endif libs-y += common/init/

# Special handling for a few options which support SPL/TPL/VPL -libs-$(CONFIG_$(SPL_TPL_)LIBCOMMON_SUPPORT) += boot/ common/ cmd/ env/ -libs-$(CONFIG_$(SPL_TPL_)LIBGENERIC_SUPPORT) += lib/ +libs-$(CONFIG_$(PHASE_)LIBCOMMON_SUPPORT) += boot/ common/ cmd/ env/ +libs-$(CONFIG_$(PHASE_)LIBGENERIC_SUPPORT) += lib/ ifdef CONFIG_SPL_FRAMEWORK libs-$(CONFIG_PARTITIONS) += disk/ endif @@ -131,7 +131,7 @@ libs-y += dts/ libs-y += fs/ libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/ libs-$(CONFIG_SPL_NET) += net/ -libs-$(CONFIG_$(SPL_TPL_)UNIT_TEST) += test/ +libs-$(CONFIG_$(PHASE_)UNIT_TEST) += test/

head-y := $(addprefix $(obj)/,$(head-y)) libs-y := $(addprefix $(obj)/,$(libs-y)) @@ -147,12 +147,12 @@ endif

u-boot-spl-init := $(head-y) u-boot-spl-main := $(libs-y) -ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA +ifdef CONFIG_$(PHASE_)OF_PLATDATA platdata-hdr := include/generated/dt-structs-gen.h include/generated/dt-decl.h platdata-inst := $(obj)/dts/dt-uclass.o $(obj)/dts/dt-device.o platdata-noinst := $(obj)/dts/dt-plat.o

-ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA_INST +ifdef CONFIG_$(PHASE_)OF_PLATDATA_INST u-boot-spl-platdata := $(platdata-inst) u-boot-spl-old-platdata := $(platdata-noinst) else @@ -169,9 +169,9 @@ endif # OF_PLATDATA

# Linker Script # First test whether there's a linker-script for the specific stage defined... -ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),) +ifneq ($(CONFIG_$(PHASE_)LDSCRIPT),) # need to strip off double quotes -LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%)) +LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(PHASE_)LDSCRIPT:"%"=%)) else # ...then fall back to the generic SPL linker-script ifneq ($(CONFIG_SPL_LDSCRIPT),) @@ -205,11 +205,11 @@ LDPPFLAGS += \

# Turn various CONFIG symbols into IMAGE symbols for easy reuse of # the scripts between SPL, TPL and VPL. -ifneq ($(CONFIG_$(SPL_TPL_)MAX_SIZE),0x0) -LDPPFLAGS += -DIMAGE_MAX_SIZE=$(CONFIG_$(SPL_TPL_)MAX_SIZE) +ifneq ($(CONFIG_$(PHASE_)MAX_SIZE),0x0) +LDPPFLAGS += -DIMAGE_MAX_SIZE=$(CONFIG_$(PHASE_)MAX_SIZE) endif -ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),) -LDPPFLAGS += -DIMAGE_TEXT_BASE=$(CONFIG_$(SPL_TPL_)TEXT_BASE) +ifneq ($(CONFIG_$(PHASE_)TEXT_BASE),) +LDPPFLAGS += -DIMAGE_TEXT_BASE=$(CONFIG_$(PHASE_)TEXT_BASE) endif

MKIMAGEOUTPUT ?= /dev/null @@ -323,7 +323,7 @@ endif # - OF_REAL is enabled # - we have either OF_SEPARATE or OF_HOSTFILE build_dtb := -ifneq ($(CONFIG_$(SPL_TPL_)OF_REAL),) +ifneq ($(CONFIG_$(PHASE_)OF_REAL),) ifneq ($(CONFIG_OF_SEPARATE)$(CONFIG_SANDBOX),) build_dtb := y endif @@ -331,7 +331,7 @@ endif

ifneq ($(build_dtb),) $(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \ - $(if $(CONFIG_$(SPL_TPL_)SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \ + $(if $(CONFIG_$(PHASE_)SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \ $(FINAL_DTB_CONTAINER) FORCE $(call if_changed,cat)

@@ -355,7 +355,7 @@ pythonpath = PYTHONPATH=scripts/dtc/pylibfdt DTOC_ARGS := $(pythonpath) $(srctree)/tools/dtoc/dtoc \ -d $(obj)/$(SPL_BIN).dtb -p $(SPL_NAME)

-ifneq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA_INST),) +ifneq ($(CONFIG_$(PHASE_)OF_PLATDATA_INST),) DTOC_ARGS += -i endif

@@ -400,7 +400,7 @@ quiet_cmd_objcopy = OBJCOPY $@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@

OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \ - $(if $(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),-R .start16 -R .resetvec) + $(if $(CONFIG_$(PHASE_)X86_16BIT_INIT),-R .start16 -R .resetvec)

$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE $(call if_changed,objcopy) @@ -429,8 +429,8 @@ LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker) LDFLAGS_$(SPL_BIN) += --build-id=none

# Pick the best match (e.g. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL) -ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),) -LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE) +ifneq ($(CONFIG_$(PHASE_)TEXT_BASE),) +LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(PHASE_)TEXT_BASE) endif

ifdef CONFIG_TARGET_SOCFPGA_ARRIA10 diff --git a/test/dm/Makefile b/test/dm/Makefile index c6c63051e0b..6c9ebb8d07c 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -42,7 +42,7 @@ obj-$(CONFIG_CLK) += clk.o clk_ccf.o obj-$(CONFIG_CPU) += cpu.o obj-$(CONFIG_CROS_EC) += cros_ec.o obj-$(CONFIG_PWM_CROS_EC) += cros_ec_pwm.o -obj-$(CONFIG_$(SPL_TPL_)DEVRES) += devres.o +obj-$(CONFIG_$(PHASE_)DEVRES) += devres.o obj-$(CONFIG_DMA) += dma.o obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o obj-$(CONFIG_DM_DSA) += dsa.o @@ -102,7 +102,7 @@ obj-$(CONFIG_DM_RESET) += reset.o obj-$(CONFIG_SYSRESET) += sysreset.o obj-$(CONFIG_DM_REGULATOR) += regulator.o obj-$(CONFIG_CMD_RKMTD) += rkmtd.o -obj-$(CONFIG_$(SPL_TPL_)DM_RNG) += rng.o +obj-$(CONFIG_$(PHASE_)DM_RNG) += rng.o obj-$(CONFIG_DM_RTC) += rtc.o obj-$(CONFIG_SCMI_FIRMWARE) += scmi.o obj-$(CONFIG_SCSI) += scsi.o diff --git a/tools/qconfig.py b/tools/qconfig.py index e025f560928..7b4934b726d 100755 --- a/tools/qconfig.py +++ b/tools/qconfig.py @@ -1222,8 +1222,8 @@ def scan_makefiles(fnames): (None, 'FRED') >>> RE_MK_CONFIGS.search('CONFIG_$(XPL_)MARY').groups() ('$(XPL_)', 'MARY') - >>> RE_MK_CONFIGS.search('CONFIG_$(SPL_TPL_)MARY').groups() - ('$(SPL_TPL_)', 'MARY') + >>> RE_MK_CONFIGS.search('CONFIG_$(PHASE_)MARY').groups() + ('$(PHASE_)', 'MARY') """ all_uses = collections.defaultdict(list) fname_uses = {} @@ -1322,7 +1322,7 @@ def do_scan_source(path, do_update): an SPL_ option, but for which there is none; for MOD_PROPER, look at source code which implies a Proper option (i.e. use of CONFIG_IS_ENABLED() or $(XPL_) or - $(SPL_TPL_) but for which there none; + $(PHASE_) but for which there none; if MODE_NORMAL, ignore SPL

Returns:

Rename these to use the word PHASE instead.

Signed-off-by: Simon Glass sjg@chromium.org ---

(no changes since v1)

common/spl/spl.c | 36 ++++++++++++++++++------------------ common/spl/spl_fit.c | 2 +- common/spl/spl_legacy.c | 2 +- include/spl.h | 14 +++++++------- 4 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/common/spl/spl.c b/common/spl/spl.c index 9748a3fb3e9..94657d00591 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -97,9 +97,9 @@ __weak int dram_init_banksize(void) #if CONFIG_IS_ENABLED(OS_BOOT) __weak int spl_start_uboot(void) { - puts(SPL_TPL_PROMPT + puts(PHASE_PROMPT "Please implement spl_start_uboot() for your board\n"); - puts(SPL_TPL_PROMPT "Direct Linux boot not active!\n"); + puts(PHASE_PROMPT "Direct Linux boot not active!\n"); return 1; }

@@ -140,13 +140,13 @@ void spl_fixup_fdt(void *fdt_blob) /* fixup the memory dt node */ err = fdt_shrink_to_minimum(fdt_blob, 0); if (err == 0) { - printf(SPL_TPL_PROMPT "fdt_shrink_to_minimum err - %d\n", err); + printf(PHASE_PROMPT "fdt_shrink_to_minimum err - %d\n", err); return; }

err = arch_fixup_fdt(fdt_blob); if (err) { - printf(SPL_TPL_PROMPT "arch_fixup_fdt err - %d\n", err); + printf(PHASE_PROMPT "arch_fixup_fdt err - %d\n", err); return; } #endif @@ -330,7 +330,7 @@ int spl_parse_image_header(struct spl_image_info *spl_image, spl_image->load_addr = start; spl_image->entry_point = start; spl_image->size = size; - debug(SPL_TPL_PROMPT + debug(PHASE_PROMPT "payload Image, load addr: 0x%lx size: %d\n", spl_image->load_addr, spl_image->size); return 0; @@ -344,7 +344,7 @@ int spl_parse_image_header(struct spl_image_info *spl_image, spl_image->load_addr = CONFIG_SYS_LOAD_ADDR; spl_image->entry_point = CONFIG_SYS_LOAD_ADDR; spl_image->size = end - start; - debug(SPL_TPL_PROMPT + debug(PHASE_PROMPT "payload zImage, load addr: 0x%lx size: %d\n", spl_image->load_addr, spl_image->size); return 0; @@ -423,7 +423,7 @@ static int write_spl_handoff(void) ret = handoff_arch_save(ho); if (ret) return ret; - debug(SPL_TPL_PROMPT "Wrote SPL handoff\n"); + debug(PHASE_PROMPT "Wrote SPL handoff\n");

return 0; } @@ -623,11 +623,11 @@ static int boot_from_devices(struct spl_image_info *spl_image, printf("Trying to boot from %s\n", spl_loader_name(loader)); else if (CONFIG_IS_ENABLED(SHOW_ERRORS)) { - printf(SPL_TPL_PROMPT + printf(PHASE_PROMPT "Unsupported Boot Device %d\n", bootdev); } else { - puts(SPL_TPL_PROMPT + puts(PHASE_PROMPT "Unsupported Boot Device!\n"); } } @@ -673,7 +673,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) struct spl_image_info spl_image; int ret, os;

- debug(">>" SPL_TPL_PROMPT "board_init_r()\n"); + debug(">>" PHASE_PROMPT "board_init_r()\n");

spl_set_bd();

@@ -693,7 +693,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) if (ret) { debug("%s: Failed to set up bloblist: ret=%d\n", __func__, ret); - puts(SPL_TPL_PROMPT "Cannot set up bloblist\n"); + puts(PHASE_PROMPT "Cannot set up bloblist\n"); hang(); } } @@ -702,7 +702,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)

ret = setup_spl_handoff(); if (ret) { - puts(SPL_TPL_PROMPT "Cannot set up SPL handoff\n"); + puts(PHASE_PROMPT "Cannot set up SPL handoff\n"); hang(); } } @@ -723,7 +723,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) if (CONFIG_IS_ENABLED(PCI) && !(gd->flags & GD_FLG_DM_DEAD)) { ret = pci_init(); if (ret) - puts(SPL_TPL_PROMPT "Cannot initialize PCI\n"); + puts(PHASE_PROMPT "Cannot initialize PCI\n"); /* Don't fail. We still can try other boot methods. */ }

@@ -750,10 +750,10 @@ void board_init_r(gd_t *dummy1, ulong dummy2) ARRAY_SIZE(spl_boot_list)); if (ret) { if (CONFIG_IS_ENABLED(SHOW_ERRORS)) - printf(SPL_TPL_PROMPT "failed to boot from all boot devices (err=%d)\n", + printf(PHASE_PROMPT "failed to boot from all boot devices (err=%d)\n", ret); else - puts(SPL_TPL_PROMPT "failed to boot from all boot devices\n"); + puts(PHASE_PROMPT "failed to boot from all boot devices\n"); hang(); }

@@ -807,13 +807,13 @@ void board_init_r(gd_t *dummy1, ulong dummy2) if (CONFIG_IS_ENABLED(HANDOFF)) { ret = write_spl_handoff(); if (ret) - printf(SPL_TPL_PROMPT + printf(PHASE_PROMPT "SPL hand-off write failed (err=%d)\n", ret); } if (CONFIG_IS_ENABLED(UPL_OUT) && (gd->flags & GD_FLG_UPL)) { ret = spl_write_upl_handoff(&spl_image); if (ret) { - printf(SPL_TPL_PROMPT + printf(PHASE_PROMPT "UPL hand-off write failed (err=%d)\n", ret); hang(); } @@ -843,7 +843,7 @@ void preloader_console_init(void) gd->flags |= GD_FLG_HAVE_CONSOLE;

#if CONFIG_IS_ENABLED(BANNER_PRINT) - puts("\nU-Boot " SPL_TPL_NAME " " PLAIN_VERSION " (" U_BOOT_DATE " - " + puts("\nU-Boot " PHASE_NAME " " PLAIN_VERSION " (" U_BOOT_DATE " - " U_BOOT_TIME " " U_BOOT_TZ ")\n"); #endif #ifdef CONFIG_SPL_DISPLAY_PRINT diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index 1ad5a69d807..3160f573bfb 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -904,7 +904,7 @@ int spl_load_fit_image(struct spl_image_info *spl_image, spl_image->os = IH_OS_INVALID; spl_image->name = genimg_get_os_name(spl_image->os);

- debug(SPL_TPL_PROMPT "payload image: %32s load addr: 0x%lx size: %d\n", + debug(PHASE_PROMPT "payload image: %32s load addr: 0x%lx size: %d\n", spl_image->name, spl_image->load_addr, spl_image->size);

#ifdef CONFIG_SPL_FIT_SIGNATURE diff --git a/common/spl/spl_legacy.c b/common/spl/spl_legacy.c index a77893455f2..9252b3a3de0 100644 --- a/common/spl/spl_legacy.c +++ b/common/spl/spl_legacy.c @@ -71,7 +71,7 @@ int spl_parse_legacy_header(struct spl_image_info *spl_image,

spl_image->os = image_get_os(header); spl_image->name = image_get_name(header); - debug(SPL_TPL_PROMPT + debug(PHASE_PROMPT "payload image: %32s load addr: 0x%lx size: %d\n", spl_image->name, spl_image->load_addr, spl_image->size);

diff --git a/include/spl.h b/include/spl.h index 3fc50cd9195..269e36bb441 100644 --- a/include/spl.h +++ b/include/spl.h @@ -241,16 +241,16 @@ static inline const char *xpl_prefix(enum xpl_phase_t phase) /* A string name for SPL or TPL */ #ifdef CONFIG_XPL_BUILD # ifdef CONFIG_TPL_BUILD -# define SPL_TPL_NAME "TPL" +# define PHASE_NAME "TPL" # elif defined(CONFIG_VPL_BUILD) -# define SPL_TPL_NAME "VPL" -# else -# define SPL_TPL_NAME "SPL" +# define PHASE_NAME "VPL" +# elif defined(CONFIG_SPL_BUILD) +# define PHASE_NAME "SPL" # endif -# define SPL_TPL_PROMPT SPL_TPL_NAME ": " +# define PHASE_PROMPT PHASE_NAME ": " #else -# define SPL_TPL_NAME "" -# define SPL_TPL_PROMPT "" +# define PHASE_NAME "" +# define PHASE_PROMPT "" #endif

/**