Handle Stefan's comments. This has the added benefit of making the patch considerably smaller.

Signed-off-by: Gary Jennejohn garyj@denx.de --- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/quad100hd/Makefile | 51 ++++++++ board/quad100hd/config.mk | 24 ++++ board/quad100hd/nand.c | 79 +++++++++++ board/quad100hd/quad100hd.c | 93 +++++++++++++ board/quad100hd/u-boot.lds | 133 +++++++++++++++++++ include/configs/quad100hd.h | 299 +++++++++++++++++++++++++++++++++++++++++++ 9 files changed, 687 insertions(+), 0 deletions(-) create mode 100644 board/quad100hd/Makefile create mode 100644 board/quad100hd/config.mk create mode 100644 board/quad100hd/nand.c create mode 100644 board/quad100hd/quad100hd.c create mode 100644 board/quad100hd/u-boot.lds create mode 100644 include/configs/quad100hd.h

diff --git a/MAINTAINERS b/MAINTAINERS index d1782b4..3af55a3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -204,6 +204,10 @@ Klaus Heydeck heydeck@kieback-peter.de KUP4K MPC855 KUP4X MPC859

+Gary Jennejohn garyj@denx.de + + quad100hd PPC405EP + Murray Jensen Murray.Jensen@csiro.au

cogent_mpc8xx MPC8xx diff --git a/MAKEALL b/MAKEALL index 38911ed..471f6f7 100755 --- a/MAKEALL +++ b/MAKEALL @@ -218,6 +218,7 @@ LIST_4xx=" \ PMC405 \ PMC440 \ PPChameleonEVB \ + quad100hd \ rainier \ sbc405 \ sc3 \ diff --git a/Makefile b/Makefile index 86e44d0..f49f114 100644 --- a/Makefile +++ b/Makefile @@ -1381,6 +1381,9 @@ PPChameleonEVB_HI_33_config: unconfig } @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave

+quad100hd_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd + sbc405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405

diff --git a/board/quad100hd/Makefile b/board/quad100hd/Makefile new file mode 100644 index 0000000..252ad5a --- /dev/null +++ b/board/quad100hd/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o nand.o +SOBJS = + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/quad100hd/config.mk b/board/quad100hd/config.mk new file mode 100644 index 0000000..71c0476 --- /dev/null +++ b/board/quad100hd/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFF80000 diff --git a/board/quad100hd/nand.c b/board/quad100hd/nand.c new file mode 100644 index 0000000..86d5cc3 --- /dev/null +++ b/board/quad100hd/nand.c @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2008 + * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#if defined(CONFIG_CMD_NAND) +#include <asm/gpio.h> +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +static void quad100hd_hwcontrol(struct mtd_info *mtd, int cmd) +{ + switch(cmd) { + case NAND_CTL_SETCLE: + gpio_write_bit(CFG_NAND_CLE, 1); + break; + case NAND_CTL_CLRCLE: + gpio_write_bit(CFG_NAND_CLE, 0); + break; + + case NAND_CTL_SETALE: + gpio_write_bit(CFG_NAND_ALE, 1); + break; + case NAND_CTL_CLRALE: + gpio_write_bit(CFG_NAND_ALE, 0); + break; + + case NAND_CTL_SETNCE: + gpio_write_bit(CFG_NAND_CE, 0); + break; + case NAND_CTL_CLRNCE: + gpio_write_bit(CFG_NAND_CE, 1); + break; + } +} + +static int quad100hd_nand_ready(struct mtd_info *mtd) +{ + return gpio_read_in_bit(CFG_NAND_RDY); +} + +/* + * Main initialization routine + */ +int board_nand_init(struct nand_chip *nand) +{ + /* Set address of hardware control function */ + nand->hwcontrol = quad100hd_hwcontrol; + nand->dev_ready = quad100hd_nand_ready; + nand->eccmode = NAND_ECC_SOFT; + /* 15 us command delay time */ + nand->chip_delay = 20; + + /* Return happy */ + return 0; +} +#endif /* CONFIG_CMD_NAND */ diff --git a/board/quad100hd/quad100hd.c b/board/quad100hd/quad100hd.c new file mode 100644 index 0000000..52cceee --- /dev/null +++ b/board/quad100hd/quad100hd.c @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2008 + * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de. + * + * Based in part on board/icecube/icecube.c from PPCBoot + * (C) Copyright 2003 Intrinsyc Software + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <malloc.h> +#include <environment.h> +#include <logbuff.h> +#include <post.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/gpio.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + /* taken from PPCBoot */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); + mtdcr(uicpr, 0xFFFF7FFE); /* set int polarities */ + mtdcr(uictr, 0x00000000); /* set int trigger levels */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + + mtdcr (CPC0_SRR, 0x00040000); /* Hold PCI bridge in reset */ + + return 0; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); +#ifdef DISPLAY_BOARD_INFO + sys_info_t sysinfo; +#endif + + puts("Board: Quad100hd"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + +#ifdef DISPLAY_BOARD_INFO + /* taken from ppcboot */ + get_sys_info (&sysinfo); + + printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz); + printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); + printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000); + printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000); + printf("\tEPB: %lu MHz\n", sysinfo.freqPLB / (sysinfo.pllExtBusDiv * + 1000000)); + printf ("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000); +#endif + + return (0); +} + +long int initdram(int board_type) +{ + return (CFG_SDRAM_SIZE); +} diff --git a/board/quad100hd/u-boot.lds b/board/quad100hd/u-boot.lds new file mode 100644 index 0000000..195d91b --- /dev/null +++ b/board/quad100hd/u-boot.lds @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h new file mode 100644 index 0000000..89504fd --- /dev/null +++ b/include/configs/quad100hd.h @@ -0,0 +1,299 @@ +/* + * (C) Copyright 2008 + * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * quad100hd.h - configuration for Quad100hd board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_QUAD100HD 1 /* Board is Quad100hd */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EP 1 /* Specifc 405EP support*/ + +#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ + +#define PLLMR0_DEFAULT PLLMR0_266_133_66 /* no PCI */ +#define PLLMR1_DEFAULT PLLMR1_266_133_66 /* no PCI */ + +#define CFG_ENV_IS_IN_EEPROM 1 /* use the EEPROM for environment vars */ + +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 0x01 /* PHY address */ +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_PHY_RESET 1 +#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_ASKENV +#undef CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_LOG +#undef CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#undef CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/*----------------------------------------------------------------------- + * SDRAM + *----------------------------------------------------------------------*/ +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 +#define CFG_SDRAM_SIZE 0x02000000 /* 32 MB */ + +/* FIX! SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 3 /* CAS latency */ +#define CFG_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CFG_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE command period */ +#define CFG_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CFG_SDRAM_tRFC 66 /* Auto refresh period */ + +/* + * JFFS2 + */ +#define CFG_JFFS2_FIRST_BANK 0 +#ifdef CFG_KERNEL_IN_JFFS2 +#define CFG_JFFS2_FIRST_SECTOR 0 /* JFFS starts at block 0 */ +#else /* kernel not in JFFS */ +#define CFG_JFFS2_FIRST_SECTOR 8 /* block 0-7 is kernel (1MB = 8 sectors) */ +#endif +#define CFG_JFFS2_NUM_BANKS 1 + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#define CFG_BASE_BAUD 691200 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_info (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* bytes of address */ + +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 8 byte write page size */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ +#define CFG_EEPROM_SIZE 0x2000 + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CFG_MONITOR_BASE 0xFFF80000 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CFG_FLASH_WORD_SIZE unsigned short +#define CFG_FLASH_ADDR0 0x0555 +#define CFG_FLASH_ADDR1 0x02aa +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_INCREMENT 0 /* there is only one bank */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ +#define CFG_ENV_OFFSET 0x00050000 /* Offset of Environment Sector */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) +#endif + +#ifdef CFG_ENV_IS_IN_EEPROM +#define CFG_ENV_SIZE 0x400 /* Size of Environment vars */ +#define CFG_ENV_OFFSET 0x00000000 +#define CFG_ENABLE_CRC_16 1 /* Intrinsyc formatting used crc16 */ +#endif + +/* partly from PPCBoot */ +/* NAND */ +#define CONFIG_NAND +#ifdef CONFIG_NAND +#define CFG_NAND_BASE 0x60000000 +#define CFG_NAND_CS 10 /* our CS is GPIO10 */ +#define CFG_NAND_RDY 23 /* our RDY is GPIO23 */ +#define CFG_NAND_CE 24 /* our CE is GPIO24 */ +#define CFG_NAND_CLE 31 /* our CLE is GPIO31 */ +#define CFG_NAND_ALE 30 /* our ALE is GPIO30 */ +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 +#endif + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +/* see ./cpu/ppc4xx/start.S */ +#define CFG_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of OCM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + * Taken from PPCBoot board/icecube/icecube.h + */ + +/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/ndfc.c */ +#define CFG_EBC_PB0AP 0x04002480 +/* AMD NOR flash - this corresponds to FLASH_BASE so may be correct */ +#define CFG_EBC_PB0CR 0xFFC5A000 +#define CFG_EBC_PB1AP 0x04005480 +#define CFG_EBC_PB1CR 0x60018000 +#define CFG_EBC_PB2AP 0x00000000 +#define CFG_EBC_PB2CR 0x00000000 +#define CFG_EBC_PB3AP 0x00000000 +#define CFG_EBC_PB3CR 0x00000000 +#define CFG_EBC_PB4AP 0x00000000 +#define CFG_EBC_PB4CR 0x00000000 + +/*----------------------------------------------------------------------- + * Definitions for GPIO setup (PPC405EP specific) + * + * Taken in part from PPCBoot board/icecube/icecube.h + */ +/* see ./cpu/ppc4xx/cpu_init.c ./cpu/ppc4xx/start.S */ +#define CFG_GPIO0_OSRH 0x55555550 +#define CFG_GPIO0_OSRL 0x00000110 +#define CFG_GPIO0_ISR1H 0x00000000 +#define CFG_GPIO0_ISR1L 0x15555445 +#define CFG_GPIO0_TSRH 0x00000000 +#define CFG_GPIO0_TSRL 0x00000000 +#define CFG_GPIO0_TCR 0xFFFF8097 +#define CFG_GPIO0_ODR 0x00000000 + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* ENVIRONMENT VARS */ + +#define CONFIG_IPADDR 192.168.1.67 +#define CONFIG_SERVERIP 192.168.1.50 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_LOADADDR 300000 +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 + +#endif /* __CONFIG_H */