[U-Boot-Users] Code Warrior 8.14 + WireTAP + U-boot bootloader image ( Arabella 2.0 C D-ROM "Linux for Motorola 82xx")
Hello,
Did any one on this list used elf bootloader for PQ2FADS_VR 66 MHz board (with the MPC8275 processor) provided on the Arabella 2.0 CD-ROM "Linux for Motorola 82xx" ?
Specifically I was trying to use Code Warrior 8.14 + WireTAP to program the 66 MHz elf U-boot bootloader image (supplied on the Arabella 2.0 CD-ROM "Linux for Motorola 82xx") onto the flash of the brand new PQ2FADS_VR 66 MHz board with the MPC8275 processor.
While the programming of the flash seemingly completed without errors - however the resulted bootloader is not functional ... - upon the power reset of the board the serial driver (at least) of the bootloader was not functional (either one of the board's two serial leds was not "up" and there was no connection over HyperTerminal through either one of the two board's serial connectors).
Best regards, Alex
________________________________________________________________ Get your name as your email address. Includes spam protection, 1GB storage, no ads and more Only $1.99/ month - visit http://www.mysite.com/name today!
Alex,
in message 20040907.084113.509.485968@webmail14.lax.untd.com you wrote:
Did any one on this list used elf bootloader for PQ2FADS_VR 66 MHz board (with the MPC8275 processor) provided on the Arabella 2.0 CD-ROM "Linux for Motorola 82xx" ?
I already replied to your question on the etux mailing list. There was no need to repost the very same question here. My hinto to post on u-boot-users was intended for _new_ questions.
While the programming of the flash seemingly completed without errors - however the resulted bootloader is not functional ... -
I repeat my recommendation:
Use the latest version of U-Boot (top of CVS tree). See http://sourceforge.net/projects/u-boot and http://www.denx.de/twiki/bin/view/DULG/Manual
Best regards,
Wolfgang Denk
participants (2)
-
Alex Povolotsky -
Wolfgang Denk