[U-Boot] BDI3000 configuration for AppliedMicro 460EX revB
Hi,
Can someone please share a BDI3000 configuration for u-boot/kernel debugging on 460EX revB.
Thanks a lot in advance.
Felix.
Hi Felix,
On Thursday 12 August 2010 08:55:08 Felix Radensky wrote:
Can someone please share a BDI3000 configuration for u-boot/kernel debugging on 460EX revB.
The one I'm using on my Canyonlands attached. As always you need to change your local settings (IP-addresses etc).
Cheers, Stefan
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office@denx.de
Hi Stefan,
Stefan Roese wrote:
Hi Felix,
On Thursday 12 August 2010 08:55:08 Felix Radensky wrote:
Can someone please share a BDI3000 configuration for u-boot/kernel debugging on 460EX revB.
The one I'm using on my Canyonlands attached. As always you need to change your local settings (IP-addresses etc).
Cheers, Stefan
Thanks a lot. I'm used to almost completely removing [INIT] section for debugging. That's how it worked on 405EX, but on 460EX it's apparently different.
Felix.
participants (2)
-
Felix Radensky -
Stefan Roese