[U-Boot-Users] [git patch] MPC8349ADS
Please pull from 'mpc8349ads' branch of git.kernel.org:/pub/scm/boot/u-boot/u-boot.git
to receive the following updates:
CHANGELOG | 3 board/mpc8349ads/Makefile | 2 board/mpc8349ads/mpc8349ads.c | 41 ---- board/mpc8349ads/pci.c | 380 ++++++++++++++++++++++++++++++++++++++++++ include/asm-ppc/mpc8349_pci.h | 1 include/configs/MPC8349ADS.h | 24 +- 6 files changed, 400 insertions(+), 51 deletions(-)
Kumar Gala: Added PCI support for MPC8349ADS board
diff --git a/CHANGELOG b/CHANGELOG index c1da98f..6c66441 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ======================================================================
+* Added PCI support for MPC8349ADS board + Patch by Kumar Gala 11 Jan 2006 + * Add support for 28F256J3A flah (=> 64 MB) on PM520 board
* Fix compiler problem with at91rm9200dk board. diff --git a/board/mpc8349ads/Makefile b/board/mpc8349ads/Makefile index 4327b0d..f865f9c 100644 --- a/board/mpc8349ads/Makefile +++ b/board/mpc8349ads/Makefile @@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
-OBJS := $(BOARD).o +OBJS := $(BOARD).o pci.o
$(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/mpc8349ads/mpc8349ads.c b/board/mpc8349ads/mpc8349ads.c index da8d3d7..505acbc 100644 --- a/board/mpc8349ads/mpc8349ads.c +++ b/board/mpc8349ads/mpc8349ads.c @@ -147,47 +147,6 @@ int checkboard (void) return 0; }
-#if defined(CONFIG_PCI) -/* - * Initialize PCI Devices, report devices found - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxads_config_table[] = { - {PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID, - pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMON_MEMORY | PCI_COMMAND_MASTER - } }, - {} -} -#endif - - -volatile static struct pci_controller hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxads_config_table, -#endif - }, - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxads_config_table, -#endif - } -}; -#endif /* CONFIG_PCI */ - - -void -pci_init_board(void) -{ -#ifdef CONFIG_PCI - extern void pci_mpc83xx_init(volatile struct pci_controller *hose); - - pci_mpc83xx_init(hose); -#endif /* CONFIG_PCI */ -} - /* * if MPC8349ADS is soldered with SDRAM */ diff --git a/board/mpc8349ads/pci.c b/board/mpc8349ads/pci.c new file mode 100644 index 0000000..6cafbaa --- /dev/null +++ b/board/mpc8349ads/pci.c @@ -0,0 +1,380 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <asm/mmu.h> +#include <common.h> +#include <asm/global_data.h> +#include <pci.h> +#include <asm/mpc8349_pci.h> +#include <i2c.h> + +#ifdef CONFIG_PCI + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxads_config_table[] = { + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_IDSEL_NUMBER, PCI_ANY_ID, + pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + } + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxads_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxads_config_table, +#endif + } +}; + +/************************************************************************** + * + * pib_init() -- initialize the PCA9555PW IO expander on the PIB board + * + */ +void +pib_init(void) +{ + u8 val8; + /* + * Assign PIB PMC slot to desired PCI bus + */ + mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET); + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(PCI_64BIT) + val8 = 0xf4; /* PMC2:PCI1/64-bit */ +#elif defined(PCI_ALL_PCI1) + val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */ +#elif defined(PCI_ONE_PCI1) + val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */ +#else + val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + asm("eieio"); + +#if defined(PCI_64BIT) + printf("PCI1: 64-bit on PMC2\n"); +#elif defined(PCI_ALL_PCI1) + printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n"); +#elif defined(PCI_ONE_PCI1) + printf("PCI1: 32-bit on PMC1\n"); + printf("PCI2: 32-bit on PMC2, PMC3\n"); +#else + printf("PCI1: 32-bit on PMC1, PMC2\n"); + printf("PCI2: 32-bit on PMC3\n"); +#endif +} + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + */ +void +pci_init_board(void) +{ + DECLARE_GLOBAL_DATA_PTR; + volatile immap_t * immr; + volatile clk8349_t * clk; + volatile law8349_t * pci_law; + volatile pot8349_t * pci_pot; + volatile pcictrl8349_t * pci_ctrl; + volatile pciconf8349_t * pci_conf; + u16 reg16; + u32 reg32; + u32 dev; + struct pci_controller * hose; + + immr = (immap_t *)CFG_IMMRBAR; + clk = (clk8349_t *)&immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + pib_init(); + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + clk->occr = 0xff000000; + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + +#ifdef CONFIG_MPC83XX_PCI2 + pci_ctrl[1].gcr = 0; + udelay(2000); + pci_ctrl[1].gcr = 1; +#endif + + /* We need to wait at least a 1sec based on PCI specs */ + { + int i; + + for (i = 0; i < 1000; ++i) + udelay (1000); + } + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space - prefetch */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI1 mmio - non-prefetch mem space */ + pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_MMIO_BASE, + CFG_PCI1_MMIO_PHYS, + CFG_PCI1_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMRBAR+0x8300), + (CFG_IMMRBAR+0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); + +#ifdef CONFIG_MPC83XX_PCI2 + hose = &pci_hose[1]; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI2 mem space - prefetch */ + pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); + + /* PCI2 IO space */ + pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); + + /* PCI2 mmio - non-prefetch mem space */ + pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[1].pitar1 = 0x0; + pci_ctrl[1].pibar1 = 0x0; + pci_ctrl[1].piebar1 = 0x0; + pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + hose->first_busno = pci_hose[0].last_busno + 1; + hose->last_busno = 0xff; + + /* PCI memory prefetch space */ + pci_set_region(hose->regions + 0, + CFG_PCI2_MEM_BASE, + CFG_PCI2_MEM_PHYS, + CFG_PCI2_MEM_SIZE, + PCI_REGION_MEM|PCI_REGION_PREFETCH); + + /* PCI memory space */ + pci_set_region(hose->regions + 1, + CFG_PCI2_MMIO_BASE, + CFG_PCI2_MMIO_PHYS, + CFG_PCI2_MMIO_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 2, + CFG_PCI2_IO_BASE, + CFG_PCI2_IO_PHYS, + CFG_PCI2_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 3, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 4; + + pci_setup_indirect(hose, + (CFG_IMMRBAR+0x8380), + (CFG_IMMRBAR+0x8384)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +#endif + +} +#endif /* CONFIG_PCI */ diff --git a/include/asm-ppc/mpc8349_pci.h b/include/asm-ppc/mpc8349_pci.h index 48255a3..7a1adba 100644 --- a/include/asm-ppc/mpc8349_pci.h +++ b/include/asm-ppc/mpc8349_pci.h @@ -77,6 +77,7 @@ #define POCMR_ENABLE 0x80000000 #define POCMR_PCI_IO 0x40000000 #define POCMR_PREFETCH_EN 0x20000000 +#define POCMR_PCI2 0x10000000
/* Soft PCI reset */
diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349ADS.h index d6d2fab..5677fa1 100644 --- a/include/configs/MPC8349ADS.h +++ b/include/configs/MPC8349ADS.h @@ -41,9 +41,8 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349ADS 1 /* MPC8349ADS board specific */
-/* FIXME: Real PCI support will come in a follow-up update. */ -#undef CONFIG_PCI - +#define CONFIG_PCI +#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE
@@ -324,19 +323,26 @@ * General PCI * Addresses are mapped 1-1. */ + #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe2000000 -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
-#define CFG_PCI2_MEM_BASE 0xA0000000 +#define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE -#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MMIO_BASE 0xb0000000 +#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE +#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ #define CFG_PCI2_IO_BASE 0x00000000 -#define CFG_PCI2_IO_PHYS 0xe3000000 -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_IO_PHYS 0xe2100000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI)
#define PCI_ALL_PCI1
Is there a reason this pci.c file lives under board/mpc8349ads instead of under cpu/mpc83xx ??? Do we each really need to duplicate the whole thing?
Please pull from 'mpc8349ads' branch of git.kernel.org:/pub/scm/boot/u-boot/u-boot.git
to receive the following updates:
CHANGELOG | 3 board/mpc8349ads/Makefile | 2 board/mpc8349ads/mpc8349ads.c | 41 ---- board/mpc8349ads/pci.c | 380 ++++++++++++++++++++++++++++++++++++++++++ include/asm-ppc/mpc8349_pci.h | 1 include/configs/MPC8349ADS.h | 24 +- 6 files changed, 400 insertions(+), 51 deletions(-)
Kumar Gala: Added PCI support for MPC8349ADS board
diff --git a/CHANGELOG b/CHANGELOG index c1da98f..6c66441 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ======================================================================
+* Added PCI support for MPC8349ADS board
- Patch by Kumar Gala 11 Jan 2006
Add support for 28F256J3A flah (=> 64 MB) on PM520 board
Fix compiler problem with at91rm9200dk board.
diff --git a/board/mpc8349ads/Makefile b/board/mpc8349ads/Makefile index 4327b0d..f865f9c 100644 --- a/board/mpc8349ads/Makefile +++ b/board/mpc8349ads/Makefile @@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
-OBJS := $(BOARD).o +OBJS := $(BOARD).o pci.o
$(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/mpc8349ads/mpc8349ads.c b/board/mpc8349ads/mpc8349ads.c index da8d3d7..505acbc 100644 --- a/board/mpc8349ads/mpc8349ads.c +++ b/board/mpc8349ads/mpc8349ads.c @@ -147,47 +147,6 @@ int checkboard (void) return 0; }
-#if defined(CONFIG_PCI) -/*
- Initialize PCI Devices, report devices found
- */
-#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxads_config_table[] = {
- {PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID,
- pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,PCI_COMMON_MEMORY | PCI_COMMAND_MASTER- } },
- {}
-} -#endif
-volatile static struct pci_controller hose[] = {
- {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_mpc83xxads_config_table,
-#endif
- },
- {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_mpc83xxads_config_table,
-#endif
- }
-}; -#endif /* CONFIG_PCI */
-void -pci_init_board(void) -{ -#ifdef CONFIG_PCI
- extern void pci_mpc83xx_init(volatile struct pci_controller *hose);
- pci_mpc83xx_init(hose);
-#endif /* CONFIG_PCI */ -}
/*
- if MPC8349ADS is soldered with SDRAM
*/ diff --git a/board/mpc8349ads/pci.c b/board/mpc8349ads/pci.c new file mode 100644 index 0000000..6cafbaa --- /dev/null +++ b/board/mpc8349ads/pci.c @@ -0,0 +1,380 @@ +/*
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <asm/mmu.h> +#include <common.h> +#include <asm/global_data.h> +#include <pci.h> +#include <asm/mpc8349_pci.h> +#include <i2c.h>
+#ifdef CONFIG_PCI
+/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxads_config_table[] = {
- {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_IDSEL_NUMBER, PCI_ANY_ID,pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,PCI_ENET0_MEMADDR,PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}- },
- {}
+}; +#endif
+static struct pci_controller pci_hose[] = {
{+#ifndef CONFIG_PCI_PNP
config_table:pci_mpc83xxads_config_table,+#endif
},{+#ifndef CONFIG_PCI_PNP
config_table:pci_mpc83xxads_config_table,+#endif
}+};
+/**************************************************************************
- pib_init() -- initialize the PCA9555PW IO expander on the PIB board
- */
+void +pib_init(void) +{
- u8 val8;
- /*
* Assign PIB PMC slot to desired PCI bus*/- mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET);
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
- val8 = 0;
- i2c_write(0x23, 0x6, 1, &val8, 1);
- i2c_write(0x23, 0x7, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x23, 0x2, 1, &val8, 1);
- i2c_write(0x23, 0x3, 1, &val8, 1);
- val8 = 0;
- i2c_write(0x26, 0x6, 1, &val8, 1);
- val8 = 0x34;
- i2c_write(0x26, 0x7, 1, &val8, 1);
+#if defined(PCI_64BIT)
- val8 = 0xf4; /* PMC2:PCI1/64-bit */
+#elif defined(PCI_ALL_PCI1)
- val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */
+#elif defined(PCI_ONE_PCI1)
- val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */
+#else
- val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */
+#endif
- i2c_write(0x26, 0x2, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x26, 0x3, 1, &val8, 1);
- val8 = 0;
- i2c_write(0x27, 0x6, 1, &val8, 1);
- i2c_write(0x27, 0x7, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x27, 0x2, 1, &val8, 1);
- val8 = 0xef;
- i2c_write(0x27, 0x3, 1, &val8, 1);
- asm("eieio");
+#if defined(PCI_64BIT)
- printf("PCI1: 64-bit on PMC2\n");
+#elif defined(PCI_ALL_PCI1)
- printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n");
+#elif defined(PCI_ONE_PCI1)
- printf("PCI1: 32-bit on PMC1\n");
- printf("PCI2: 32-bit on PMC2, PMC3\n");
+#else
- printf("PCI1: 32-bit on PMC1, PMC2\n");
- printf("PCI2: 32-bit on PMC3\n");
+#endif +}
+/**************************************************************************
- pci_init_board()
- NOTICE: PCI2 is not currently supported
- */
+void +pci_init_board(void) +{
- DECLARE_GLOBAL_DATA_PTR;
- volatile immap_t * immr;
- volatile clk8349_t * clk;
- volatile law8349_t * pci_law;
- volatile pot8349_t * pci_pot;
- volatile pcictrl8349_t * pci_ctrl;
- volatile pciconf8349_t * pci_conf;
- u16 reg16;
- u32 reg32;
- u32 dev;
- struct pci_controller * hose;
- immr = (immap_t *)CFG_IMMRBAR;
- clk = (clk8349_t *)&immr->clk;
- pci_law = immr->sysconf.pcilaw;
- pci_pot = immr->ios.pot;
- pci_ctrl = immr->pci_ctrl;
- pci_conf = immr->pci_conf;
- hose = &pci_hose[0];
- pib_init();
- /*
* Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode*/- reg32 = clk->occr;
- udelay(2000);
- clk->occr = 0xff000000;
- udelay(2000);
- /*
* Release PCI RST Output signal*/- pci_ctrl[0].gcr = 0;
- udelay(2000);
- pci_ctrl[0].gcr = 1;
+#ifdef CONFIG_MPC83XX_PCI2
- pci_ctrl[1].gcr = 0;
- udelay(2000);
- pci_ctrl[1].gcr = 1;
+#endif
- /* We need to wait at least a 1sec based on PCI specs */
- {
int i;for (i = 0; i < 1000; ++i)udelay (1000);- }
- /*
* Configure PCI Local Access Windows*/- pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
- pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
- pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
- pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;
- /*
* Configure PCI Outbound Translation Windows*/- /* PCI1 mem space - prefetch */
- pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);
- /* PCI1 IO space */
- pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
- /* PCI1 mmio - non-prefetch mem space */
- pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
- /*
* Configure PCI Inbound Translation Windows*/- /* we need RAM mapped to PCI space for the devices to
* access main memory */- pci_ctrl[0].pitar1 = 0x0;
- pci_ctrl[0].pibar1 = 0x0;
- pci_ctrl[0].piebar1 = 0x0;
- pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
- hose->first_busno = 0;
- hose->last_busno = 0xff;
- /* PCI memory prefetch space */
- pci_set_region(hose->regions + 0,
CFG_PCI1_MEM_BASE,CFG_PCI1_MEM_PHYS,CFG_PCI1_MEM_SIZE,PCI_REGION_MEM|PCI_REGION_PREFETCH);- /* PCI memory space */
- pci_set_region(hose->regions + 1,
CFG_PCI1_MMIO_BASE,CFG_PCI1_MMIO_PHYS,CFG_PCI1_MMIO_SIZE,PCI_REGION_MEM);- /* PCI IO space */
- pci_set_region(hose->regions + 2,
CFG_PCI1_IO_BASE,CFG_PCI1_IO_PHYS,CFG_PCI1_IO_SIZE,PCI_REGION_IO);- /* System memory space */
- pci_set_region(hose->regions + 3,
CONFIG_PCI_SYS_MEM_BUS,CONFIG_PCI_SYS_MEM_PHYS,gd->ram_size,PCI_REGION_MEM | PCI_REGION_MEMORY);- hose->region_count = 4;
- pci_setup_indirect(hose,
(CFG_IMMRBAR+0x8300),(CFG_IMMRBAR+0x8304));- pci_register_hose(hose);
- /*
* Write to Command register*/- reg16 = 0xff;
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
- /*
* Clear non-reserved bits in status register.*/- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
- /*
* Hose scan.*/- hose->last_busno = pci_hose_scan(hose);
+#ifdef CONFIG_MPC83XX_PCI2
- hose = &pci_hose[1];
- /*
* Configure PCI Outbound Translation Windows*/- /* PCI2 mem space - prefetch */
- pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);
- /* PCI2 IO space */
- pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);
- /* PCI2 mmio - non-prefetch mem space */
- pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK);
- /*
* Configure PCI Inbound Translation Windows*/- /* we need RAM mapped to PCI space for the devices to
* access main memory */- pci_ctrl[1].pitar1 = 0x0;
- pci_ctrl[1].pibar1 = 0x0;
- pci_ctrl[1].piebar1 = 0x0;
- pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
- hose->first_busno = pci_hose[0].last_busno + 1;
- hose->last_busno = 0xff;
- /* PCI memory prefetch space */
- pci_set_region(hose->regions + 0,
CFG_PCI2_MEM_BASE,CFG_PCI2_MEM_PHYS,CFG_PCI2_MEM_SIZE,PCI_REGION_MEM|PCI_REGION_PREFETCH);- /* PCI memory space */
- pci_set_region(hose->regions + 1,
CFG_PCI2_MMIO_BASE,CFG_PCI2_MMIO_PHYS,CFG_PCI2_MMIO_SIZE,PCI_REGION_MEM);- /* PCI IO space */
- pci_set_region(hose->regions + 2,
CFG_PCI2_IO_BASE,CFG_PCI2_IO_PHYS,CFG_PCI2_IO_SIZE,PCI_REGION_IO);- /* System memory space */
- pci_set_region(hose->regions + 3,
CONFIG_PCI_SYS_MEM_BUS,CONFIG_PCI_SYS_MEM_PHYS,gd->ram_size,PCI_REGION_MEM | PCI_REGION_MEMORY);- hose->region_count = 4;
- pci_setup_indirect(hose,
(CFG_IMMRBAR+0x8380),(CFG_IMMRBAR+0x8384));- pci_register_hose(hose);
- /*
* Write to Command register*/- reg16 = 0xff;
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
- /*
* Clear non-reserved bits in status register.*/- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
- /*
* Hose scan.*/- hose->last_busno = pci_hose_scan(hose);
+#endif
+} +#endif /* CONFIG_PCI */ diff --git a/include/asm-ppc/mpc8349_pci.h b/include/asm-ppc/mpc8349_pci.h index 48255a3..7a1adba 100644 --- a/include/asm-ppc/mpc8349_pci.h +++ b/include/asm-ppc/mpc8349_pci.h @@ -77,6 +77,7 @@ #define POCMR_ENABLE 0x80000000 #define POCMR_PCI_IO 0x40000000 #define POCMR_PREFETCH_EN 0x20000000 +#define POCMR_PCI2 0x10000000
/* Soft PCI reset */
diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349ADS.h index d6d2fab..5677fa1 100644 --- a/include/configs/MPC8349ADS.h +++ b/include/configs/MPC8349ADS.h @@ -41,9 +41,8 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349ADS 1 /* MPC8349ADS board specific */
-/* FIXME: Real PCI support will come in a follow-up update. */ -#undef CONFIG_PCI
+#define CONFIG_PCI +#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE
@@ -324,19 +323,26 @@
- General PCI
- Addresses are mapped 1-1.
*/
#define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe2000000 -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
-#define CFG_PCI2_MEM_BASE 0xA0000000 +#define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE -#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MMIO_BASE 0xb0000000 +#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE +#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ #define CFG_PCI2_IO_BASE 0x00000000 -#define CFG_PCI2_IO_PHYS 0xe3000000 -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_IO_PHYS 0xe2100000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI)
#define PCI_ALL_PCI1
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&da...
There were enough subtle differences between how MPC8349ADS and the TQM board were doing. In the future it likely we could move common code into cpu/mpc83xx/pci.c
Once we have another 83xx board or two it will be easier to figure out what that commonality truly is.
- kumar
On Jan 25, 2006, at 1:05 PM, David Updegraff wrote:
Is there a reason this pci.c file lives under board/mpc8349ads instead of under cpu/mpc83xx ??? Do we each really need to duplicate the whole thing?
Please pull from 'mpc8349ads' branch of git.kernel.org:/pub/scm/boot/u-boot/u-boot.git
to receive the following updates:
CHANGELOG | 3 board/mpc8349ads/Makefile | 2 board/mpc8349ads/mpc8349ads.c | 41 ---- board/mpc8349ads/pci.c | 380 +++++++++++++++++++++++++++++ +++++++++++++ include/asm-ppc/mpc8349_pci.h | 1 include/configs/MPC8349ADS.h | 24 +- 6 files changed, 400 insertions(+), 51 deletions(-)
Kumar Gala: Added PCI support for MPC8349ADS board
diff --git a/CHANGELOG b/CHANGELOG index c1da98f..6c66441 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4:
===================================================================== =
+* Added PCI support for MPC8349ADS board
- Patch by Kumar Gala 11 Jan 2006
Add support for 28F256J3A flah (=> 64 MB) on PM520 board
Fix compiler problem with at91rm9200dk board.
diff --git a/board/mpc8349ads/Makefile b/board/mpc8349ads/Makefile index 4327b0d..f865f9c 100644 --- a/board/mpc8349ads/Makefile +++ b/board/mpc8349ads/Makefile @@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
-OBJS := $(BOARD).o +OBJS := $(BOARD).o pci.o
$(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/mpc8349ads/mpc8349ads.c b/board/mpc8349ads/ mpc8349ads.c index da8d3d7..505acbc 100644 --- a/board/mpc8349ads/mpc8349ads.c +++ b/board/mpc8349ads/mpc8349ads.c @@ -147,47 +147,6 @@ int checkboard (void) return 0; }
-#if defined(CONFIG_PCI) -/*
- Initialize PCI Devices, report devices found
- */
-#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxads_config_table[] = {
- {PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID,
- pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,PCI_COMMON_MEMORY | PCI_COMMAND_MASTER- } },
- {}
-} -#endif
-volatile static struct pci_controller hose[] = {
- {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_mpc83xxads_config_table,
-#endif
- },
- {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_mpc83xxads_config_table,
-#endif
- }
-}; -#endif /* CONFIG_PCI */
-void -pci_init_board(void) -{ -#ifdef CONFIG_PCI
- extern void pci_mpc83xx_init(volatile struct pci_controller *hose);
- pci_mpc83xx_init(hose);
-#endif /* CONFIG_PCI */ -}
/*
- if MPC8349ADS is soldered with SDRAM
*/ diff --git a/board/mpc8349ads/pci.c b/board/mpc8349ads/pci.c new file mode 100644 index 0000000..6cafbaa --- /dev/null +++ b/board/mpc8349ads/pci.c @@ -0,0 +1,380 @@ +/*
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <asm/mmu.h> +#include <common.h> +#include <asm/global_data.h> +#include <pci.h> +#include <asm/mpc8349_pci.h> +#include <i2c.h>
+#ifdef CONFIG_PCI
+/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxads_config_table[] = {
- {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_IDSEL_NUMBER, PCI_ANY_ID,pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,PCI_ENET0_MEMADDR,PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}- },
- {}
+}; +#endif
+static struct pci_controller pci_hose[] = {
{+#ifndef CONFIG_PCI_PNP
config_table:pci_mpc83xxads_config_table,+#endif
},{+#ifndef CONFIG_PCI_PNP
config_table:pci_mpc83xxads_config_table,+#endif
}+};
+/
- pib_init() -- initialize the PCA9555PW IO expander on the PIB
board
- */
+void +pib_init(void) +{
- u8 val8;
- /*
* Assign PIB PMC slot to desired PCI bus*/- mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET);
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
- val8 = 0;
- i2c_write(0x23, 0x6, 1, &val8, 1);
- i2c_write(0x23, 0x7, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x23, 0x2, 1, &val8, 1);
- i2c_write(0x23, 0x3, 1, &val8, 1);
- val8 = 0;
- i2c_write(0x26, 0x6, 1, &val8, 1);
- val8 = 0x34;
- i2c_write(0x26, 0x7, 1, &val8, 1);
+#if defined(PCI_64BIT)
- val8 = 0xf4; /* PMC2:PCI1/64-bit */
+#elif defined(PCI_ALL_PCI1)
- val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */
+#elif defined(PCI_ONE_PCI1)
- val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */
+#else
- val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */
+#endif
- i2c_write(0x26, 0x2, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x26, 0x3, 1, &val8, 1);
- val8 = 0;
- i2c_write(0x27, 0x6, 1, &val8, 1);
- i2c_write(0x27, 0x7, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x27, 0x2, 1, &val8, 1);
- val8 = 0xef;
- i2c_write(0x27, 0x3, 1, &val8, 1);
- asm("eieio");
+#if defined(PCI_64BIT)
- printf("PCI1: 64-bit on PMC2\n");
+#elif defined(PCI_ALL_PCI1)
- printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n");
+#elif defined(PCI_ONE_PCI1)
- printf("PCI1: 32-bit on PMC1\n");
- printf("PCI2: 32-bit on PMC2, PMC3\n");
+#else
- printf("PCI1: 32-bit on PMC1, PMC2\n");
- printf("PCI2: 32-bit on PMC3\n");
+#endif +}
+/
- pci_init_board()
- NOTICE: PCI2 is not currently supported
- */
+void +pci_init_board(void) +{
- DECLARE_GLOBAL_DATA_PTR;
- volatile immap_t * immr;
- volatile clk8349_t * clk;
- volatile law8349_t * pci_law;
- volatile pot8349_t * pci_pot;
- volatile pcictrl8349_t * pci_ctrl;
- volatile pciconf8349_t * pci_conf;
- u16 reg16;
- u32 reg32;
- u32 dev;
- struct pci_controller * hose;
- immr = (immap_t *)CFG_IMMRBAR;
- clk = (clk8349_t *)&immr->clk;
- pci_law = immr->sysconf.pcilaw;
- pci_pot = immr->ios.pot;
- pci_ctrl = immr->pci_ctrl;
- pci_conf = immr->pci_conf;
- hose = &pci_hose[0];
- pib_init();
- /*
* Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode*/- reg32 = clk->occr;
- udelay(2000);
- clk->occr = 0xff000000;
- udelay(2000);
- /*
* Release PCI RST Output signal*/- pci_ctrl[0].gcr = 0;
- udelay(2000);
- pci_ctrl[0].gcr = 1;
+#ifdef CONFIG_MPC83XX_PCI2
- pci_ctrl[1].gcr = 0;
- udelay(2000);
- pci_ctrl[1].gcr = 1;
+#endif
- /* We need to wait at least a 1sec based on PCI specs */
- {
int i;for (i = 0; i < 1000; ++i)udelay (1000);- }
- /*
* Configure PCI Local Access Windows*/- pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
- pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
- pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
- pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;
- /*
* Configure PCI Outbound Translation Windows*/- /* PCI1 mem space - prefetch */
- pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M
& POCMR_CM_MASK);
- /* PCI1 IO space */
- pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M &
POCMR_CM_MASK);
- /* PCI1 mmio - non-prefetch mem space */
- pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);
- /*
* Configure PCI Inbound Translation Windows*/- /* we need RAM mapped to PCI space for the devices to
* access main memory */- pci_ctrl[0].pitar1 = 0x0;
- pci_ctrl[0].pibar1 = 0x0;
- pci_ctrl[0].piebar1 = 0x0;
- pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
- hose->first_busno = 0;
- hose->last_busno = 0xff;
- /* PCI memory prefetch space */
- pci_set_region(hose->regions + 0,
CFG_PCI1_MEM_BASE,CFG_PCI1_MEM_PHYS,CFG_PCI1_MEM_SIZE,PCI_REGION_MEM|PCI_REGION_PREFETCH);- /* PCI memory space */
- pci_set_region(hose->regions + 1,
CFG_PCI1_MMIO_BASE,CFG_PCI1_MMIO_PHYS,CFG_PCI1_MMIO_SIZE,PCI_REGION_MEM);- /* PCI IO space */
- pci_set_region(hose->regions + 2,
CFG_PCI1_IO_BASE,CFG_PCI1_IO_PHYS,CFG_PCI1_IO_SIZE,PCI_REGION_IO);- /* System memory space */
- pci_set_region(hose->regions + 3,
CONFIG_PCI_SYS_MEM_BUS,CONFIG_PCI_SYS_MEM_PHYS,gd->ram_size,PCI_REGION_MEM | PCI_REGION_MEMORY);- hose->region_count = 4;
- pci_setup_indirect(hose,
(CFG_IMMRBAR+0x8300),(CFG_IMMRBAR+0x8304));- pci_register_hose(hose);
- /*
* Write to Command register*/- reg16 = 0xff;
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
- /*
* Clear non-reserved bits in status register.*/- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
- /*
* Hose scan.*/- hose->last_busno = pci_hose_scan(hose);
+#ifdef CONFIG_MPC83XX_PCI2
- hose = &pci_hose[1];
- /*
* Configure PCI Outbound Translation Windows*/- /* PCI2 mem space - prefetch */
- pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN |
(POCMR_CM_256M & POCMR_CM_MASK);
- /* PCI2 IO space */
- pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO |
(POCMR_CM_1M & POCMR_CM_MASK);
- /* PCI2 mmio - non-prefetch mem space */
- pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M &
POCMR_CM_MASK);
- /*
* Configure PCI Inbound Translation Windows*/- /* we need RAM mapped to PCI space for the devices to
* access main memory */- pci_ctrl[1].pitar1 = 0x0;
- pci_ctrl[1].pibar1 = 0x0;
- pci_ctrl[1].piebar1 = 0x0;
- pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
- hose->first_busno = pci_hose[0].last_busno + 1;
- hose->last_busno = 0xff;
- /* PCI memory prefetch space */
- pci_set_region(hose->regions + 0,
CFG_PCI2_MEM_BASE,CFG_PCI2_MEM_PHYS,CFG_PCI2_MEM_SIZE,PCI_REGION_MEM|PCI_REGION_PREFETCH);- /* PCI memory space */
- pci_set_region(hose->regions + 1,
CFG_PCI2_MMIO_BASE,CFG_PCI2_MMIO_PHYS,CFG_PCI2_MMIO_SIZE,PCI_REGION_MEM);- /* PCI IO space */
- pci_set_region(hose->regions + 2,
CFG_PCI2_IO_BASE,CFG_PCI2_IO_PHYS,CFG_PCI2_IO_SIZE,PCI_REGION_IO);- /* System memory space */
- pci_set_region(hose->regions + 3,
CONFIG_PCI_SYS_MEM_BUS,CONFIG_PCI_SYS_MEM_PHYS,gd->ram_size,PCI_REGION_MEM | PCI_REGION_MEMORY);- hose->region_count = 4;
- pci_setup_indirect(hose,
(CFG_IMMRBAR+0x8380),(CFG_IMMRBAR+0x8384));- pci_register_hose(hose);
- /*
* Write to Command register*/- reg16 = 0xff;
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
- /*
* Clear non-reserved bits in status register.*/- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
- /*
* Hose scan.*/- hose->last_busno = pci_hose_scan(hose);
+#endif
+} +#endif /* CONFIG_PCI */ diff --git a/include/asm-ppc/mpc8349_pci.h b/include/asm-ppc/ mpc8349_pci.h index 48255a3..7a1adba 100644 --- a/include/asm-ppc/mpc8349_pci.h +++ b/include/asm-ppc/mpc8349_pci.h @@ -77,6 +77,7 @@ #define POCMR_ENABLE 0x80000000 #define POCMR_PCI_IO 0x40000000 #define POCMR_PREFETCH_EN 0x20000000 +#define POCMR_PCI2 0x10000000
/* Soft PCI reset */
diff --git a/include/configs/MPC8349ADS.h b/include/configs/ MPC8349ADS.h index d6d2fab..5677fa1 100644 --- a/include/configs/MPC8349ADS.h +++ b/include/configs/MPC8349ADS.h @@ -41,9 +41,8 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349ADS 1 /* MPC8349ADS board specific */
-/* FIXME: Real PCI support will come in a follow-up update. */ -#undef CONFIG_PCI
+#define CONFIG_PCI +#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE
@@ -324,19 +323,26 @@
- General PCI
- Addresses are mapped 1-1.
*/
#define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ #define CFG_PCI1_IO_BASE 0x00000000 #define CFG_PCI1_IO_PHYS 0xe2000000 -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
-#define CFG_PCI2_MEM_BASE 0xA0000000 +#define CFG_PCI2_MEM_BASE 0xa0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE -#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MMIO_BASE 0xb0000000 +#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE +#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ #define CFG_PCI2_IO_BASE 0x00000000 -#define CFG_PCI2_IO_PHYS 0xe3000000 -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_IO_PHYS 0xe2100000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ #if defined(CONFIG_PCI)
#define PCI_ALL_PCI1
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel? cmd=lnk&kid=103432&bid=230486&dat=121642
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel? cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
In message Pine.LNX.4.44.0601231745430.21555-100000@gate.crashing.org you wrote:
Please pull from 'mpc8349ads' branch of git.kernel.org:/pub/scm/boot/u-boot/u-boot.git
Done. Thanks.
Best regards,
Wolfgang Denk
participants (4)
-
David Updegraff -
Kumar Gala -
Kumar Gala -
Wolfgang Denk