[U-Boot] SUNXI : CONFIG_VIDEO_SUNXI is never set
Version: u-boot-2018.09
This is a follow-up for : "SUNXI : setenv video-mode not working"
Although I have added CONFIG_VIDEO_SUNXI=y in configs/orangepi_one_defconfig
the source file sunxi_display.c is not compiled. Hence the setenv video-mode is not working ?
Please advice.
Many thanks in advance, Arjan
On Fri, Mar 1, 2019 at 11:36 PM Arjan van Vught arjan.van.vught@gmail.com wrote:
Version: u-boot-2018.09
This is a follow-up for : "SUNXI : setenv video-mode not working"
Although I have added CONFIG_VIDEO_SUNXI=y in configs/orangepi_one_defconfig
the source file sunxi_display.c is not compiled. Hence the setenv video-mode is not working ?
That file is only used for DE 1.0, while the H3, which the Orange Pi One is based on, has DE 2.0.
ChenYu
Please advice.
Many thanks in advance, Arjan
http://www.orangepi-dmx.org/allwinner-h3
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Op 7 mrt. 2019, om 09:04 heeft Chen-Yu Tsai wens@csie.org het volgende geschreven:
On Fri, Mar 1, 2019 at 11:36 PM Arjan van Vught arjan.van.vught@gmail.com wrote:
Version: u-boot-2018.09
This is a follow-up for : "SUNXI : setenv video-mode not working"
Although I have added CONFIG_VIDEO_SUNXI=y in configs/orangepi_one_defconfig
the source file sunxi_display.c is not compiled. Hence the setenv video-mode is not working ?
That file is only used for DE 1.0, while the H3, which the Orange Pi One is based on, has DE 2.0.
Is it on the roadmap adding support for DE 2.0 ?
- Arjan
ChenYu
Please advice.
Many thanks in advance, Arjan
http://www.orangepi-dmx.org/allwinner-h3
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Op 10 mrt. 2019, om 20:18 heeft Arjan van Vught arjan.van.vught@gmail.com het volgende geschreven:
Op 7 mrt. 2019, om 09:04 heeft Chen-Yu Tsai wens@csie.org het volgende geschreven:
On Fri, Mar 1, 2019 at 11:36 PM Arjan van Vught arjan.van.vught@gmail.com wrote:
Version: u-boot-2018.09
This is a follow-up for : "SUNXI : setenv video-mode not working"
Although I have added CONFIG_VIDEO_SUNXI=y in configs/orangepi_one_defconfig
the source file sunxi_display.c is not compiled. Hence the setenv video-mode is not working ?
That file is only used for DE 1.0, while the H3, which the Orange Pi One is based on, has DE 2.0.
Is it on the roadmap adding support for DE 2.0 ?
Hi ChenYu, any updates for this issue ? Thanks, Arjan
On Sun, Dec 22, 2019 at 10:07 PM Arjan van Vught arjan.van.vught@gmail.com wrote:
Op 10 mrt. 2019, om 20:18 heeft Arjan van Vught arjan.van.vught@gmail.com het volgende geschreven:
Op 7 mrt. 2019, om 09:04 heeft Chen-Yu Tsai wens@csie.org het volgende geschreven:
On Fri, Mar 1, 2019 at 11:36 PM Arjan van Vught arjan.van.vught@gmail.com wrote:
Version: u-boot-2018.09
This is a follow-up for : "SUNXI : setenv video-mode not working"
Although I have added CONFIG_VIDEO_SUNXI=y in configs/orangepi_one_defconfig
the source file sunxi_display.c is not compiled. Hence the setenv video-mode is not working ?
That file is only used for DE 1.0, while the H3, which the Orange Pi One is based on, has DE 2.0.
Is it on the roadmap adding support for DE 2.0 ?
Hi ChenYu, any updates for this issue ? Thanks, Arjan
You are asking the wrong person.
participants (2)
-
Arjan van Vught -
Chen-Yu Tsai