[U-Boot-Users] [PATCH] Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.

newer
[U-Boot-Users] TFTP block size is...

older
[U-Boot-Users] [PATCH] Add Vitesse...

Wolfgang Denk

22 Apr 2008 22 Apr '08

4:24 p.m.

From: Yuri Tikhonov yur@pollux.denx.de

Signed-off-by: Dmitry Rakhchev rda@emcraft.com --- post/tests.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/post/tests.c b/post/tests.c index 698f85c..ed4ef2b 100644 --- a/post/tests.c +++ b/post/tests.c @@ -225,7 +225,7 @@ struct post_test post_list[] = CFG_POST_DSP }, #endif -#if CONFIG_POST & CFG_POST_DSP +#if CONFIG_POST & CFG_POST_CODEC { "CODEC test", "codec",

-- 1.5.4.2

Show replies by date

Wolfgang Denk

22 Apr 22 Apr

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] The patch adds new POST tests for the Lwmon5 board.

From: Yuri Tikhonov yur@pollux.denx.de

* External Watchdog test; * dsPIC tests; * FPGA test; * GDC test; * Sysmon tests.

Signed-off-by: Dmitry Rakhchev rda@emcraft.com Signed-off-by: Yuri Tikhonov yur@emcraft.com --- board/lwmon5/lwmon5.c | 19 +++ include/configs/lwmon5.h | 92 ++++++++++++++- include/post.h | 5 + include/ppc440.h | 3 + post/board/lwmon5/Makefile | 28 +++++ post/board/lwmon5/dsp.c | 58 +++++++++ post/board/lwmon5/dspic.c | 109 +++++++++++++++++ post/board/lwmon5/fpga.c | 104 ++++++++++++++++ post/board/lwmon5/gdc.c | 94 +++++++++++++++ post/board/lwmon5/sysmon.c | 265 ++++++++++++++++++++++++++++++++++++++++++ post/board/lwmon5/watchdog.c | 132 +++++++++++++++++++++ post/tests.c | 26 ++++ 12 files changed, 931 insertions(+), 4 deletions(-) create mode 100644 post/board/lwmon5/Makefile create mode 100644 post/board/lwmon5/dsp.c create mode 100644 post/board/lwmon5/dspic.c create mode 100644 post/board/lwmon5/fpga.c create mode 100644 post/board/lwmon5/gdc.c create mode 100644 post/board/lwmon5/sysmon.c create mode 100644 post/board/lwmon5/watchdog.c

diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 815c01f..73d5de5 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -96,6 +96,25 @@ int board_early_init_f(void)

gpio_write_bit(CFG_GPIO_FLASH_WP, 1);

+#if CONFIG_POST & CFG_POST_BSPEC1 + gpio_write_bit(CFG_GPIO_HIGHSIDE, 1); + + reg = 0; /* reuse as counter */ + out_be32((void *)CFG_DSPIC_TEST_ADDR, + in_be32((void *)CFG_DSPIC_TEST_ADDR) + & ~CFG_DSPIC_TEST_MASK); + while (!gpio_read_in_bit(CFG_GPIO_DSPIC_READY) && reg++ < 1000) { + udelay(1000); + } + gpio_write_bit(CFG_GPIO_HIGHSIDE, 0); + if (gpio_read_in_bit(CFG_GPIO_DSPIC_READY)) { + /* set "boot error" flag */ + out_be32((void *)CFG_DSPIC_TEST_ADDR, + in_be32((void *)CFG_DSPIC_TEST_ADDR) | + CFG_DSPIC_TEST_MASK); + } +#endif + /* * Reset PHY's: * The PHY's need a 2nd reset pulse, since the MDIO address is latched diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index c3f10c7..6489e0e 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -86,6 +86,15 @@ #define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6) /* unused GPT0 COMP reg */

+/* Additional registers for watchdog timer post test */ + +#define CFG_DSPIC_TEST_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP5) +#define CFG_WATCHDOG_TIME_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP4) +#define CFG_WATCHDOG_FLAGS_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP5) +#define CFG_WATCHDOG_MAGIC 0x12480000 +#define CFG_WATCHDOG_MAGIC_MASK 0xFFFF0000 +#define CFG_DSPIC_TEST_MASK 0x00000001 + /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ @@ -156,7 +165,81 @@ CFG_POST_MEMORY | \ CFG_POST_RTC | \ CFG_POST_SPR | \ - CFG_POST_UART) + CFG_POST_UART | \ + CFG_POST_SYSMON | \ + CFG_POST_WATCHDOG | \ + CFG_POST_DSP | \ + CFG_POST_BSPEC1 | \ + CFG_POST_BSPEC2 | \ + CFG_POST_BSPEC3 | \ + CFG_POST_BSPEC4 | \ + CFG_POST_BSPEC5) + +#define CONFIG_POST_WATCHDOG {\ + "Watchdog timer test", \ + "watchdog", \ + "This test checks the watchdog timer.", \ + POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT, \ + &lwmon5_watchdog_post_test, \ + NULL, \ + NULL, \ + CFG_POST_WATCHDOG \ + } + +#define CONFIG_POST_BSPEC1 {\ + "dsPIC init test", \ + "dspic_init", \ + "This test returns result of dsPIC READY test run earlier.", \ + POST_RAM | POST_ALWAYS, \ + &dspic_init_post_test, \ + NULL, \ + NULL, \ + CFG_POST_BSPEC1 \ + } + +#define CONFIG_POST_BSPEC2 {\ + "dsPIC test", \ + "dspic", \ + "This test gets result of dsPIC POST and dsPIC version.", \ + POST_RAM | POST_ALWAYS, \ + &dspic_post_test, \ + NULL, \ + NULL, \ + CFG_POST_BSPEC2 \ + } + +#define CONFIG_POST_BSPEC3 {\ + "FPGA test", \ + "fpga", \ + "This test checks FPGA registers and memory.", \ + POST_RAM | POST_ALWAYS, \ + &fpga_post_test, \ + NULL, \ + NULL, \ + CFG_POST_BSPEC3 \ + } + +#define CONFIG_POST_BSPEC4 {\ + "GDC test", \ + "gdc", \ + "This test checks GDC registers and memory.", \ + POST_RAM | POST_ALWAYS, \ + &gdc_post_test, \ + NULL, \ + NULL, \ + CFG_POST_BSPEC4 \ + } + +#define CONFIG_POST_BSPEC5 {\ + "SYSMON1 test", \ + "sysmon1", \ + "This test checks GPIO_62_EPX pin indicating power failure.", \ + POST_RAM | POST_MANUAL | POST_NORMAL | POST_SLOWTEST, \ + &sysmon1_post_test, \ + NULL, \ + NULL, \ + CFG_POST_BSPEC5 \ + }

#define CFG_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */ #define CONFIG_LOGBUFFER @@ -181,6 +264,7 @@ #define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */ #define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */ #define CFG_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ +#define CFG_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */

#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ #if 0 @@ -366,9 +450,6 @@ #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ #define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */

-/* - * ToDo: Watchdog is not test fully, so exclude it for now - */ #define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ #define CONFIG_WD_PERIOD 40000 /* in usec */

@@ -431,10 +512,13 @@ #define CFG_GPIO_PHY1_RST 12 #define CFG_GPIO_FLASH_WP 14 #define CFG_GPIO_PHY0_RST 22 +#define CFG_GPIO_DSPIC_READY 51 #define CFG_GPIO_EEPROM_EXT_WP 55 +#define CFG_GPIO_HIGHSIDE 56 #define CFG_GPIO_EEPROM_INT_WP 57 #define CFG_GPIO_LIME_S 59 #define CFG_GPIO_LIME_RST 60 +#define CFG_GPIO_SYSMON_STATUS 62 #define CFG_GPIO_WATCHDOG 63

/*----------------------------------------------------------------------- diff --git a/include/post.h b/include/post.h index c8062bb..12c0e92 100644 --- a/include/post.h +++ b/include/post.h @@ -93,6 +93,11 @@ extern int post_hotkeys_pressed(void); #define CFG_POST_CODEC 0x00002000 #define CFG_POST_FPU 0x00004000 #define CFG_POST_ECC 0x00008000 +#define CFG_POST_BSPEC1 0x00010000 +#define CFG_POST_BSPEC2 0x00020000 +#define CFG_POST_BSPEC3 0x00040000 +#define CFG_POST_BSPEC4 0x00080000 +#define CFG_POST_BSPEC5 0x00100000

#endif /* CONFIG_POST */

diff --git a/include/ppc440.h b/include/ppc440.h index 80dd332..6e3b68d 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -1431,6 +1431,9 @@ #define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */

#define GPT0_COMP6 0x00000098 +#define GPT0_COMP5 0x00000094 +#define GPT0_COMP4 0x00000090 +#define GPT0_COMP3 0x0000008C

#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define SDR0_USB2D0CR 0x0320 diff --git a/post/board/lwmon5/Makefile b/post/board/lwmon5/Makefile new file mode 100644 index 0000000..5a92d1c --- /dev/null +++ b/post/board/lwmon5/Makefile @@ -0,0 +1,28 @@ +# +# (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com +# +# Developed for DENX Software Engineering GmbH +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +LIB = libpostlwmon5.a + +COBJS = sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o + +include $(TOPDIR)/post/rules.mk diff --git a/post/board/lwmon5/dsp.c b/post/board/lwmon5/dsp.c new file mode 100644 index 0000000..7b53af9 --- /dev/null +++ b/post/board/lwmon5/dsp.c @@ -0,0 +1,58 @@ +/* + * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com + * + * Developed for DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#ifdef CONFIG_POST + +#include <post.h> + + +#if CONFIG_POST & CFG_POST_DSP +#include <asm/io.h> + +/* This test verifies DSP status bits in FPGA */ + +DECLARE_GLOBAL_DATA_PTR; + +#define DSP_STATUS_REG 0xC4000008 + +int dsp_post_test(int flags) +{ + uint read_value; + int ret; + + ret = 0; + read_value = in_be32((void *)DSP_STATUS_REG) & 0x3; + if (read_value != 0x3) { + post_log("\nDSP status read %08X\n", read_value); + ret = 1; + } + + return ret; +} + +#endif /* CONFIG_POST & CFG_POST_DSP */ +#endif /* CONFIG_POST */ + diff --git a/post/board/lwmon5/dspic.c b/post/board/lwmon5/dspic.c new file mode 100644 index 0000000..e8fed89 --- /dev/null +++ b/post/board/lwmon5/dspic.c @@ -0,0 +1,109 @@ +/* + * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com + * + * Developed for DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#ifdef CONFIG_POST + +/* There are two tests for dsPIC currently implemented: + * 1. dsPIC ready test. Done in board_early_init_f(). Only result verified here. + * 2. dsPIC POST result test. This test gets dsPIC POST codes and version. + */ + +#include <post.h> + +#include <i2c.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define DSPIC_POST_ERROR_REG 0x800 +#define DSPIC_SYS_ERROR_REG 0x802 +#define DSPIC_VERSION_REG 0x804 + +#if CONFIG_POST & CFG_POST_BSPEC1 + +/* Verify that dsPIC ready test done early at hw init passed ok */ +int dspic_init_post_test(int flags) +{ + if (in_be32((void *)CFG_DSPIC_TEST_ADDR) & CFG_DSPIC_TEST_MASK) { + post_log("dsPIC init test failed\n"); + return 1; + } + + return 0; +} + +#endif /* CONFIG_POST & CFG_POST_BSPEC1 */ + +#if CONFIG_POST & CFG_POST_BSPEC2 +/* Read a register from the dsPIC. */ +int dspic_read(ushort reg) +{ + uchar buf[2]; + + if (i2c_read(CFG_I2C_DSPIC_IO_ADDR, reg, 2, buf, 2)) + return -1; + + return (uint)((buf[0] << 8) | buf[1]); +} + +/* Verify error codes regs, display version */ +int dspic_post_test(int flags) +{ + int data; + int ret = 0; + + post_log("\n"); + data = dspic_read(DSPIC_VERSION_REG); + if (data == -1) { + post_log("dsPIC : failed read version\n"); + ret = 1; + } else { + post_log("dsPIC version: %u.%u\n", + (data >> 8) & 0xFF, data & 0xFF); + } + + data = dspic_read(DSPIC_POST_ERROR_REG); + if (data != 0) ret = 1; + if (data == -1) { + post_log("dsPIC : failed read POST code\n"); + } else { + post_log("dsPIC POST code 0x%04X\n", data); + } + + data = dspic_read(DSPIC_SYS_ERROR_REG); + if (data != 0) ret = 1; + if (data == -1) { + post_log("dsPIC : failed read system error\n"); + } else { + post_log("dsPIC SYS-ERROR code: 0x%04X\n", data); + } + + return ret; +} + +#endif /* CONFIG_POST & CFG_POST_BSPEC2 */ +#endif /* CONFIG_POST */ + diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c new file mode 100644 index 0000000..4e3f1d5 --- /dev/null +++ b/post/board/lwmon5/fpga.c @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com + * + * Developed for DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> + +#ifdef CONFIG_POST + +/* This test performs testing of FPGA SCRATCH register, + * gets FPGA version and run get_ram_size() on FPGA memory + */ + +#include <post.h> + +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define FPGA_SCRATCH_REG 0xC4000050 +#define FPGA_VERSION_REG 0xC4000040 +#define FPGA_RAM_START 0xC4200000 +#define FPGA_RAM_END 0xC4203FFF + +#define FPGA_PWM_CTRL_REG 0xC4000020 +#define FPGA_PWM_TV_REG 0xC4000024 + +/* Turn on backlight, set brightness */ +void fpga_backlight_enable(int pwm) +{ + out_be16((void *)FPGA_PWM_CTRL_REG, 0x0701); + out_be16((void *)FPGA_PWM_TV_REG, pwm); +} + +#if CONFIG_POST & CFG_POST_BSPEC3 + +static int one_scratch_test(uint value) +{ + uint read_value; + int ret = 0; + + out_be32((void *)FPGA_SCRATCH_REG, value); + /* read other location (protect against data lines capacity) */ + ret = in_be16((void *)FPGA_VERSION_REG); + /* verify test pattern */ + read_value = in_be32((void *)FPGA_SCRATCH_REG); + if (read_value != value) { + post_log("FPGA SCRATCH test failed write %08X, read %08X\n", + value, read_value); + ret = 1; + } + + return ret; +} + +/* Verify FPGA, get version & memory size */ +int fpga_post_test(int flags) +{ + uint old_value; + ushort version; + uint read_value; + int ret = 0; + + post_log("\n"); + old_value = in_be32((void *)FPGA_SCRATCH_REG); + + if (one_scratch_test(0x55555555)) + ret = 1; + if (one_scratch_test(0xAAAAAAAA)) + ret = 1; + + out_be32((void *)FPGA_SCRATCH_REG, old_value); + + version = in_be16((void *)FPGA_VERSION_REG); + post_log("FPGA : version %u.%u\n", + (version >> 8) & 0xFF, version & 0xFF); + + read_value = get_ram_size((void *)CFG_FPGA_BASE_1, 0x4000); + post_log("FPGA RAM size: %d bytes\n", read_value); + + return ret; +} + +#endif /* CONFIG_POST & CFG_POST_BSPEC3 */ +#endif /* CONFIG_POST */ + diff --git a/post/board/lwmon5/gdc.c b/post/board/lwmon5/gdc.c new file mode 100644 index 0000000..76e5dd6 --- /dev/null +++ b/post/board/lwmon5/gdc.c @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com + * + * Developed for DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> + +#ifdef CONFIG_POST + +/* This test attempts to verify board GDC. A scratch register tested, then + * simple memory test (get_ram_size()) run over GDC memory. + */ + +#include <post.h> + +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define GDC_SCRATCH_REG 0xC1FF8044 +#define GDC_VERSION_REG 0xC1FF8084 +#define GDC_RAM_START 0xC0000000 +#define GDC_RAM_END 0xC2000000 + +#if CONFIG_POST & CFG_POST_BSPEC4 + +static int gdc_test_reg_one(uint value) +{ + int ret = 0; + uint read_value; + + /* write test pattern */ + out_be32((void *)GDC_SCRATCH_REG, value); + /* read other location (protect against data lines capacity) */ + ret = in_be32((void *)GDC_RAM_START); + /* verify test pattern */ + read_value = in_be32((void *)GDC_SCRATCH_REG); + if (read_value != value) { + post_log("GDC SCRATCH test failed write %08X, read %08X\n", + value, read_value); + ret = 1; + } + + return ret; +} + +/* Verify GDC, get memory size */ +int gdc_post_test(int flags) +{ + uint old_value; + int ret = 0; + + post_log("\n"); + old_value = in_be32((void *)GDC_SCRATCH_REG); + + if (gdc_test_reg_one(0x55555555)) + ret = 1; + if (gdc_test_reg_one(0xAAAAAAAA)) + ret = 1; + + out_be32((void *)GDC_SCRATCH_REG, old_value); + + old_value = in_be32((void *)GDC_VERSION_REG); + post_log("GDC chip version %u.%u, year %04X\n", + (old_value >> 8) & 0xFF, old_value & 0xFF, + (old_value >> 16) & 0xFFFF); + + old_value = get_ram_size((void *)GDC_RAM_START, + GDC_RAM_END - GDC_RAM_START); + post_log("GDC RAM size: %d bytes\n", old_value); + + return ret; +} +#endif /* CONFIG_POST & CFG_POST_BSPEC4 */ +#endif /* CONFIG_POST */ + diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c new file mode 100644 index 0000000..0eae4c1 --- /dev/null +++ b/post/board/lwmon5/sysmon.c @@ -0,0 +1,265 @@ +/* + * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com + * + * Developed for DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <post.h> +#include <common.h> + +#ifdef CONFIG_POST + +/* + * SYSMON test + * + * This test performs the system hardware monitoring. + * The test passes when all the following voltages and temperatures + * are within allowed ranges: + * + * Temperature -40 .. +85 C + * +5V +4.75 .. +5.25 V + * +5V standby +4.75 .. +5.25 V + * + * LCD backlight is not enabled if temperature values are not within + * allowed ranges (-30 .. + 80). The brightness of backlite can be + * controlled by setting "brightness" enviroment variable. Default value is 50% + * + * See the list of all parameters in the sysmon_table below + */ + +#include <post.h> +#include <watchdog.h> +#include <i2c.h> + +#if CONFIG_POST & CFG_POST_SYSMON + +DECLARE_GLOBAL_DATA_PTR; + +#define DEFAULT_BRIGHTNESS 50 + +/* from dspic.c */ +extern int dspic_read(ushort reg); +/* from fpga.c */ +extern void fpga_backlight_enable(int v); + +static int sysmon_temp_invalid; + +#define RELOC(x) if (x != NULL) x = (void *) ((ulong) (x) + gd->reloc_off) + +typedef struct sysmon_s sysmon_t; +typedef struct sysmon_table_s sysmon_table_t; + +static void sysmon_dspic_init (sysmon_t * this); +static int sysmon_dspic_read (sysmon_t * this, uint addr); +static void sysmon_backlight_disable (sysmon_table_t * this); +static void sysmon_backlight_enable (sysmon_table_t * this); + +struct sysmon_s +{ + uchar chip; + void (*init)(sysmon_t *); + int (*read)(sysmon_t *, uint); +}; + +static sysmon_t sysmon_dspic = + {CFG_I2C_DSPIC_IO_ADDR, sysmon_dspic_init, sysmon_dspic_read}; + +static sysmon_t * sysmon_list[] = +{ + &sysmon_dspic, + NULL +}; + +struct sysmon_table_s +{ + char * name; + char * unit_name; + sysmon_t * sysmon; + void (*exec_before)(sysmon_table_t *); + void (*exec_after)(sysmon_table_t *); + + int unit_precision; + int unit_div; + int unit_min; + int unit_max; + uint val_mask; + uint val_min; + uint val_max; + int val_valid; + uint val_min_alt; + uint val_max_alt; + int val_valid_alt; + uint addr; +}; + +static sysmon_table_t sysmon_table[] = +{ + {"Temperature", " C", &sysmon_dspic, NULL, sysmon_backlight_disable, + 1, 1, -32768, 32767, 0xFFFF, 0x8000-40, 0x8000+85, 0, + 0x8000-30, 0x8000+80, 0, 0x12BC}, + + {"+ 5 V", "V", &sysmon_dspic, NULL, NULL, + 100, 1000, -0x8000, 0x7FFF, 0xFFFF, 0x8000+4750, 0x8000+5250, 0, + 0x8000+4750, 0x8000+5250, 0, 0x12CA}, + + {"+ 5 V standby", "V", &sysmon_dspic, NULL, sysmon_backlight_enable, + 100, 1000, -0x8000, 0x7FFF, 0xFFFF, 0x8000+4750, 0x8000+5250, 0, + 0x8000+4750, 0x8000+5250, 0, 0x12C6}, +}; +static int sysmon_table_size = sizeof(sysmon_table) / sizeof(sysmon_table[0]); + +int sysmon_init_f (void) +{ + sysmon_t ** l; + + for (l = sysmon_list; *l; l++) + (*l)->init(*l); + + return 0; +} + +void sysmon_reloc (void) +{ + sysmon_t ** l; + sysmon_table_t * t; + + for (l = sysmon_list; *l; l++) { + RELOC(*l); + RELOC((*l)->init); + RELOC((*l)->read); + } + + for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) { + RELOC(t->exec_before); + RELOC(t->exec_after); + RELOC(t->sysmon); + } +} + +static char *sysmon_unit_value (sysmon_table_t *s, uint val) +{ + static char buf[32]; + char *p, sign; + int decimal, frac; + int unit_val; + + unit_val = + s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask; + + if (val == -1) + return "I/O ERROR"; + + if (unit_val < 0) { + sign = '-'; + unit_val = -unit_val; + } else + sign = '+'; + + p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div); + + + frac = unit_val % s->unit_div; + + frac /= (s->unit_div / s->unit_precision); + + decimal = s->unit_precision; + + if (decimal != 1) + *p++ = '.'; + for (decimal /= 10; decimal != 0; decimal /= 10) + *p++ = '0' + (frac / decimal) % 10; + strcpy(p, s->unit_name); + + return buf; +} + +static void sysmon_dspic_init (sysmon_t * this) +{ +} + +static int sysmon_dspic_read (sysmon_t * this, uint addr) +{ + int res = dspic_read(addr); + + /* To fit into the table range we should add 0x8000 */ + return (res == -1) ? -1 : (res + 0x8000); +} + +static void sysmon_backlight_disable (sysmon_table_t * this) +{ + if (!this->val_valid_alt) + sysmon_temp_invalid = 1; +} + +static void sysmon_backlight_enable (sysmon_table_t * this) +{ + char * param; + int rc; + + if (!sysmon_temp_invalid) { + param = getenv("brightness"); + rc = param ? simple_strtol(param, NULL, 10) : -1; + if (rc >= 0) + fpga_backlight_enable(rc); + else + fpga_backlight_enable(DEFAULT_BRIGHTNESS); + } +} + +int sysmon_post_test (int flags) +{ + int res = 0; + sysmon_table_t * t; + int val; + + for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) { + if (t->exec_before) + t->exec_before(t); + + val = t->sysmon->read(t->sysmon, t->addr); + if (val != -1) { + t->val_valid = val >= t->val_min && val <= t->val_max; + t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt; + } else { + t->val_valid = 0; + t->val_valid_alt = 0; + } + + if (t->exec_after) + t->exec_after(t); + + if ((!t->val_valid) || (flags & POST_MANUAL)) { + printf("%-17s = %-10s ", t->name, sysmon_unit_value(t, val)); + printf("allowed range"); + printf(" %-8s ..", sysmon_unit_value(t, t->val_min)); + printf(" %-8s", sysmon_unit_value(t, t->val_max)); + printf(" %s\n", t->val_valid ? "OK" : "FAIL"); + } + + if (!t->val_valid) + res = 1; + } + + return res; +} + +#endif /* CONFIG_POST & CFG_POST_SYSMON */ +#endif /* CONFIG_POST */ diff --git a/post/board/lwmon5/watchdog.c b/post/board/lwmon5/watchdog.c new file mode 100644 index 0000000..ad9e6f3 --- /dev/null +++ b/post/board/lwmon5/watchdog.c @@ -0,0 +1,132 @@ +/* + * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com + * + * Developed for DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +/* This test verifies if the reason of last reset was an abnormal voltage + * condition, than it performs watchdog test, measuing time required to + * trigger watchdog reset. + */ + +#ifdef CONFIG_POST + +#include <post.h> + +#if CONFIG_POST & CFG_POST_WATCHDOG + +#include <watchdog.h> +#include <asm/gpio.h> +#include <asm/io.h> + +static uint watchdog_magic_read(void) +{ + return in_be32((void *)CFG_WATCHDOG_FLAGS_ADDR) & + CFG_WATCHDOG_MAGIC_MASK; +} + +static void watchdog_magic_write(uint value) +{ + out_be32((void *)CFG_WATCHDOG_FLAGS_ADDR, value | + (in_be32((void *)CFG_WATCHDOG_FLAGS_ADDR) & + ~CFG_WATCHDOG_MAGIC_MASK)); +} + +int sysmon1_post_test(int flags) +{ + if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS)) { + /* 3.1. GPIO62 is low + * Assuming system voltage failure. + */ + post_log("Abnormal voltage detected (GPIO62)\n"); + return 1; + } + + return 0; +} + +int lwmon5_watchdog_post_test(int flags) +{ + /* On each reset scratch register 1 should be tested, + * but first test GPIO62: + */ + if (!(flags & POST_MANUAL) && sysmon1_post_test(flags)) { + /* 3.1. GPIO62 is low + * Assuming system voltage failure. + */ + /* 3.1.1. Set scratch register 1 to 0x0000xxxx */ + watchdog_magic_write(0); + /* 3.1.2. Mark test as failed due to voltage?! */ + return 1; + } + + if (watchdog_magic_read() != CFG_WATCHDOG_MAGIC) { + /* 3.2. Scratch register 1 differs from magic value 0x1248xxxx + * Assuming PowerOn + */ + int ints; + ulong base; + ulong time; + + /* 3.2.1. Set magic value to scratch register */ + watchdog_magic_write(CFG_WATCHDOG_MAGIC); + + ints = disable_interrupts (); + /* 3.2.2. strobe watchdog once */ + WATCHDOG_RESET(); + out_be32((void *)CFG_WATCHDOG_TIME_ADDR, 0); + /* 3.2.3. save time of strobe in scratch register 2 */ + base = post_time_ms (0); + + /* 3.2.4. Wait for 150 ms (enough for reset to happen) */ + while ((time = post_time_ms (base)) < 150) + out_be32((void *)CFG_WATCHDOG_TIME_ADDR, time); + if (ints) + enable_interrupts (); + + /* 3.2.5. Reset didn't happen. - Set 0x0000xxxx + * into scratch register 1 + */ + watchdog_magic_write(0); + /* 3.2.6. Mark test as failed. */ + post_log("hw watchdog time : %u ms, failed ", time); + return 2; + } else { + /* 3.3. Scratch register matches magic value 0x1248xxxx + * Assume this is watchdog-initiated reset + */ + ulong time; + /* 3.3.1. So, the test succeed, save measured time to syslog. */ + time = in_be32((void *)CFG_WATCHDOG_TIME_ADDR); + post_log("hw watchdog time : %u ms, passed ", time); + /* 3.3.2. Set scratch register 1 to 0x0000xxxx */ + watchdog_magic_write(0); + return 0; + } + return -1; +} + + +#endif /* CONFIG_POST & CFG_POST_WATCHDOG */ +#endif /* CONFIG_POST */ + diff --git a/post/tests.c b/post/tests.c index ed4ef2b..53d01e3 100644 --- a/post/tests.c +++ b/post/tests.c @@ -48,6 +48,13 @@ extern int dsp_post_test (int flags); extern int codec_post_test (int flags); extern int ecc_post_test (int flags);

+extern int dspic_init_post_test (int flags); +extern int dspic_post_test (int flags); +extern int gdc_post_test (int flags); +extern int fpga_post_test (int flags); +extern int lwmon5_watchdog_post_test(int flags); +extern int sysmon1_post_test(int flags); + extern int sysmon_init_f (void);

extern void sysmon_reloc (void); @@ -68,6 +75,9 @@ struct post_test post_list[] = }, #endif #if CONFIG_POST & CFG_POST_WATCHDOG +#if defined(CONFIG_POST_WATCHDOG) + CONFIG_POST_WATCHDOG, +#else { "Watchdog timer test", "watchdog", @@ -79,6 +89,7 @@ struct post_test post_list[] = CFG_POST_WATCHDOG }, #endif +#endif #if CONFIG_POST & CFG_POST_I2C { "I2C test", @@ -249,6 +260,21 @@ struct post_test post_list[] = CFG_POST_ECC }, #endif +#if CONFIG_POST & CFG_POST_BSPEC1 + CONFIG_POST_BSPEC1, +#endif +#if CONFIG_POST & CFG_POST_BSPEC2 + CONFIG_POST_BSPEC2, +#endif +#if CONFIG_POST & CFG_POST_BSPEC3 + CONFIG_POST_BSPEC3, +#endif +#if CONFIG_POST & CFG_POST_BSPEC4 + CONFIG_POST_BSPEC4, +#endif +#if CONFIG_POST & CFG_POST_BSPEC4 + CONFIG_POST_BSPEC5, +#endif };

unsigned int post_list_size = sizeof (post_list) / sizeof (struct post_test);

-- 1.5.4.2

Wolfgang Denk

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] The patch introduces the CRITICAL feature of POST tests. If the test

From: Yuri Tikhonov yur@pollux.denx.de

diff --git a/common/main.c b/common/main.c index 163ba02..21e7afa 100644 --- a/common/main.c +++ b/common/main.c @@ -40,7 +40,7 @@

#include <post.h>

-#ifdef CONFIG_SILENT_CONSOLE +#if defined(CONFIG_SILENT_CONSOLE) || defined(CONFIG_POST) DECLARE_GLOBAL_DATA_PTR; #endif

@@ -369,6 +369,12 @@ void main_loop (void) init_cmd_timeout (); # endif /* CONFIG_BOOT_RETRY_TIME */

+#ifdef CONFIG_POST + if (gd->flags & GD_FLG_POSTFAIL) { + s = getenv("failbootcmd"); + } + else +#endif /* CONFIG_POST */ #ifdef CONFIG_BOOTCOUNT_LIMIT if (bootlimit && (bootcount > bootlimit)) { printf ("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n", diff --git a/include/asm-arm/global_data.h b/include/asm-arm/global_data.h index c2d5291..0410b5e 100644 --- a/include/asm-arm/global_data.h +++ b/include/asm-arm/global_data.h @@ -60,6 +60,7 @@ typedef struct global_data { #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8")

diff --git a/include/asm-avr32/global_data.h b/include/asm-avr32/global_data.h index 681c514..daf64bc 100644 --- a/include/asm-avr32/global_data.h +++ b/include/asm-avr32/global_data.h @@ -51,6 +51,7 @@ typedef struct global_data { #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm("r5")

diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h index cb0dfc2..6debfc7 100644 --- a/include/asm-blackfin/global_data.h +++ b/include/asm-blackfin/global_data.h @@ -61,6 +61,7 @@ typedef struct global_data { #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

#define DECLARE_GLOBAL_DATA_PTR register gd_t * volatile gd asm ("P5")

diff --git a/include/asm-i386/global_data.h b/include/asm-i386/global_data.h index 1d309d5..68a9ad6 100644 --- a/include/asm-i386/global_data.h +++ b/include/asm-i386/global_data.h @@ -54,6 +54,7 @@ typedef struct { #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

extern gd_t *global_data;

diff --git a/include/asm-m68k/global_data.h b/include/asm-m68k/global_data.h index 1e26eb0..958736e 100644 --- a/include/asm-m68k/global_data.h +++ b/include/asm-m68k/global_data.h @@ -68,6 +68,7 @@ typedef struct global_data { #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

#if 0 extern gd_t *global_data; diff --git a/include/asm-microblaze/global_data.h b/include/asm-microblaze/global_data.h index a6e7834..91243b2 100644 --- a/include/asm-microblaze/global_data.h +++ b/include/asm-microblaze/global_data.h @@ -52,6 +52,7 @@ typedef struct global_data { #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r31")

diff --git a/include/asm-mips/global_data.h b/include/asm-mips/global_data.h index a024194..bd9e4dd 100644 --- a/include/asm-mips/global_data.h +++ b/include/asm-mips/global_data.h @@ -54,6 +54,7 @@ typedef struct global_data { #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("k0")

diff --git a/include/asm-nios/global_data.h b/include/asm-nios/global_data.h index fd11389..ddd66cf 100644 --- a/include/asm-nios/global_data.h +++ b/include/asm-nios/global_data.h @@ -45,6 +45,7 @@ typedef struct global_data { #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("%g7")

diff --git a/include/asm-nios2/global_data.h b/include/asm-nios2/global_data.h index a1ac288..ae5f617 100644 --- a/include/asm-nios2/global_data.h +++ b/include/asm-nios2/global_data.h @@ -44,6 +44,7 @@ typedef struct global_data { #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("r15")

diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index 205f7ed..e07092b 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -164,6 +164,7 @@ typedef struct global_data { #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

#if 1 #define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r2") diff --git a/include/asm-sh/global_data.h b/include/asm-sh/global_data.h index 0a44a34..521a66f 100644 --- a/include/asm-sh/global_data.h +++ b/include/asm-sh/global_data.h @@ -44,6 +44,7 @@ typedef struct global_data #define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ +#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */

#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("r13")

diff --git a/include/post.h b/include/post.h index 12c0e92..ee07d2c 100644 --- a/include/post.h +++ b/include/post.h @@ -42,12 +42,16 @@ #define POST_REBOOT 0x0800 /* test may cause rebooting */ #define POST_PREREL 0x1000 /* test runs before relocation */

+#define POST_CRITICAL 0x2000 /* Use failbootcmd if test failed */ + #define POST_MEM (POST_RAM | POST_ROM) #define POST_ALWAYS (POST_NORMAL | \ POST_SLOWTEST | \ POST_MANUAL | \ POST_POWERON )

+#define POST_FAIL_SAVE 0x80 + #ifndef __ASSEMBLY__

struct post_test { diff --git a/post/post.c b/post/post.c index 4ff75ee..1df0657 100644 --- a/post/post.c +++ b/post/post.c @@ -157,8 +157,10 @@ static void post_bootmode_test_off (void)

static void post_get_flags (int *test_flags) { - int flag[] = { POST_POWERON, POST_NORMAL, POST_SLOWTEST }; - char *var[] = { "post_poweron", "post_normal", "post_slowtest" }; + int flag[] = { POST_POWERON, POST_NORMAL, POST_SLOWTEST, + POST_CRITICAL }; + char *var[] = { "post_poweron", "post_normal", "post_slowtest", + "post_critical" }; int varnum = sizeof (var) / sizeof (var[0]); char list[128]; /* long enough for POST list */ char *name; @@ -224,7 +226,9 @@ static int post_run_single (struct post_test *test,

if (!(flags & POST_REBOOT)) { if ((test_flags & POST_REBOOT) && !(flags & POST_MANUAL)) { - post_bootmode_test_on (i); + post_bootmode_test_on ( + (gd->flags & GD_FLG_POSTFAIL) ? + POST_FAIL_SAVE | i : i); }

if (test_flags & POST_PREREL) @@ -236,10 +240,14 @@ static int post_run_single (struct post_test *test, if (test_flags & POST_PREREL) { if ((*test->test) (flags) == 0) post_log_mark_succ ( test->testid ); + else if (test_flags & POST_CRITICAL) + gd->flags |= GD_FLG_POSTFAIL; } else { if ((*test->test) (flags) != 0) { post_log ("FAILED\n"); show_boot_progress (-32); + if (test_flags & POST_CRITICAL) + gd->flags |= GD_FLG_POSTFAIL; } else post_log ("PASSED\n"); @@ -266,6 +274,10 @@ int post_run (char *name, int flags) unsigned int last;

if (post_bootmode_get (&last) & POST_POWERTEST) { + if (last & POST_FAIL_SAVE) { + last &= ~POST_FAIL_SAVE; + gd->flags |= GD_FLG_POSTFAIL; + } if (last < post_list_size && (flags & test_flags[last] & POST_ALWAYS) && (flags & test_flags[last] & POST_MEM)) {

-- 1.5.4.2

Wolfgang Denk

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] Some fixes to dspic, fpga, and gdc post tests for lwmon5.

From: Yuri Tikhonov yur@pollux.denx.de

Signed-off-by: Dmitry Rakhchev rda@emcraft.com Signed-off-by: Yuri Tikhonov yur@emcraft.com --- post/board/lwmon5/dspic.c | 2 +- post/board/lwmon5/fpga.c | 4 ++++ post/board/lwmon5/gdc.c | 2 +- 3 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/post/board/lwmon5/dspic.c b/post/board/lwmon5/dspic.c index e8fed89..f1c9c15 100644 --- a/post/board/lwmon5/dspic.c +++ b/post/board/lwmon5/dspic.c @@ -94,9 +94,9 @@ int dspic_post_test(int flags) }

data = dspic_read(DSPIC_SYS_ERROR_REG); - if (data != 0) ret = 1; if (data == -1) { post_log("dsPIC : failed read system error\n"); + ret = 1; } else { post_log("dsPIC SYS-ERROR code: 0x%04X\n", data); } diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c index 4e3f1d5..b87fc52 100644 --- a/post/board/lwmon5/fpga.c +++ b/post/board/lwmon5/fpga.c @@ -39,6 +39,7 @@ DECLARE_GLOBAL_DATA_PTR; #define FPGA_VERSION_REG 0xC4000040 #define FPGA_RAM_START 0xC4200000 #define FPGA_RAM_END 0xC4203FFF +#define FPGA_STAT 0xC400000C

#define FPGA_PWM_CTRL_REG 0xC4000020 #define FPGA_PWM_TV_REG 0xC4000024 @@ -93,6 +94,9 @@ int fpga_post_test(int flags) post_log("FPGA : version %u.%u\n", (version >> 8) & 0xFF, version & 0xFF);

+ /* Enable write to FPGA RAM */ + out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) | 0x1000); + read_value = get_ram_size((void *)CFG_FPGA_BASE_1, 0x4000); post_log("FPGA RAM size: %d bytes\n", read_value);

diff --git a/post/board/lwmon5/gdc.c b/post/board/lwmon5/gdc.c index 76e5dd6..0e4f0fd 100644 --- a/post/board/lwmon5/gdc.c +++ b/post/board/lwmon5/gdc.c @@ -35,7 +35,7 @@

DECLARE_GLOBAL_DATA_PTR;

-#define GDC_SCRATCH_REG 0xC1FF8044 +#define GDC_SCRATCH_REG 0xC1FF8008 #define GDC_VERSION_REG 0xC1FF8084 #define GDC_RAM_START 0xC0000000 #define GDC_RAM_END 0xC2000000

-- 1.5.4.2

Wolfgang Denk

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] Add support for the lwmon5 board reset via GPIO58.

From: Yuri Tikhonov yur@pollux.denx.de

Signed-off-by: Dmitry Rakhchev rda@emcraft.com Signed-off-by: Yuri Tikhonov yur@emcraft.com --- board/lwmon5/lwmon5.c | 5 +++++ include/configs/lwmon5.h | 2 ++ 2 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 73d5de5..7c5f6cc 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -594,3 +594,8 @@ void video_get_info_str (int line_number, char *info) } #endif #endif /* CONFIG_VIDEO */ + +void board_reset(void) +{ + gpio_write_bit(CFG_GPIO_BOARD_RESET, 1); +} diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 6489e0e..e179e4f 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -36,6 +36,7 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_BOARD_RESET 1 /* Call board_reset */

/*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -516,6 +517,7 @@ #define CFG_GPIO_EEPROM_EXT_WP 55 #define CFG_GPIO_HIGHSIDE 56 #define CFG_GPIO_EEPROM_INT_WP 57 +#define CFG_GPIO_BOARD_RESET 58 #define CFG_GPIO_LIME_S 59 #define CFG_GPIO_LIME_RST 60 #define CFG_GPIO_SYSMON_STATUS 62

-- 1.5.4.2

Wolfgang Denk

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] The patch introduces the alternative configuration of the log buffer for

From: Yuri Tikhonov yur@pollux.denx.de

To enable this, alternative, configuration the U-Boot board configuration file for lwmon5 includes the definitions of alternative addresses for header (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).

The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).

Signed-off-by: Yuri Tikhonov yur@emcraft.com --- common/cmd_bootm.c | 4 ++++ common/cmd_log.c | 38 ++++++++++++++++++++++++++++++++------ include/configs/lwmon5.h | 2 ++ include/ppc440.h | 2 ++ lib_ppc/board.c | 4 ++++ 5 files changed, 44 insertions(+), 6 deletions(-)

diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 9546729..9deb781 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -545,11 +545,15 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, }

#ifdef CONFIG_LOGBUFFER +#ifndef CONFIG_ALT_LB_ADDR kbd=gd->bd; /* Prevent initrd from overwriting logbuffer */ if (initrd_high < (kbd->bi_memsize-LOGBUFF_LEN-LOGBUFF_OVERHEAD)) initrd_high = kbd->bi_memsize-LOGBUFF_LEN-LOGBUFF_OVERHEAD; debug ("## Logbuffer at 0x%08lX ", kbd->bi_memsize-LOGBUFF_LEN); +#else + debug ("## Logbuffer at 0x%08lX ", CONFIG_ALT_LB_ADDR); +#endif #endif

/* diff --git a/common/cmd_log.c b/common/cmd_log.c index e593dbe..34b36ff 100644 --- a/common/cmd_log.c +++ b/common/cmd_log.c @@ -59,14 +59,25 @@ static char buf[1024]; static unsigned console_loglevel = 3; static unsigned default_message_loglevel = 4; static unsigned log_version = 1; +#ifdef CONFIG_ALT_LB_ADDR +static volatile logbuff_t *log; +#else static logbuff_t *log; +#endif +static char *lbuf;

void logbuff_init_ptrs (void) { unsigned long tag, post_word; char *s;

+#ifdef CONFIG_ALT_LB_ADDR + log = (logbuff_t *)CONFIG_ALT_LH_ADDR; + lbuf = (char *)CONFIG_ALT_LB_ADDR; +#else log = (logbuff_t *)(gd->bd->bi_memsize-LOGBUFF_LEN) - 1; + lbuf = log->buf; +#endif

/* Set up log version */ if ((s = getenv ("logversion")) != NULL) @@ -101,11 +112,26 @@ void logbuff_init_ptrs (void)

void logbuff_reset (void) { +#ifndef CONFIG_ALT_LB_ADDR memset (log, 0, sizeof (logbuff_t)); - if (log_version == 2) +#endif + if (log_version == 2) { log->v2.tag = LOGBUFF_MAGIC; - else +#ifdef CONFIG_ALT_LB_ADDR + log->v2.start = 0; + log->v2.con = 0; + log->v2.end = 0; + log->v2.chars = 0; +#endif + } else { log->v1.tag = LOGBUFF_MAGIC; +#ifdef CONFIG_ALT_LB_ADDR + log->v1.dummy = 0; + log->v1.start = 0; + log->v1.size = 0; + log->v1.chars = 0; +#endif + } }

int drv_logbuff_init (void) @@ -188,7 +214,7 @@ int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) size = log->v1.size; } for (i=0; i < (size&LOGBUFF_MASK); i++) { - s = (char *)log->buf+((start+i)&LOGBUFF_MASK); + s = lbuf+((start+i)&LOGBUFF_MASK); putc (*s); } return 0; @@ -196,7 +222,7 @@ int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) logbuff_reset (); return 0; } else if (strcmp(argv[1],"info") == 0) { - printf ("Logbuffer at %08lx\n", (unsigned long)log->buf); + printf ("Logbuffer at %08lx\n", (unsigned long)lbuf); if (log_version == 2) { printf ("log_start = %08lx\n", log->v2.start); printf ("log_end = %08lx\n", log->v2.end); @@ -257,14 +283,14 @@ static int logbuff_printk(const char *line) line_feed = 0; for (; p < buf_end; p++) { if (log_version == 2) { - log->buf[log->v2.end & LOGBUFF_MASK] = *p; + lbuf[log->v2.end & LOGBUFF_MASK] = *p; log->v2.end++; if (log->v2.end - log->v2.start > LOGBUFF_LEN) log->v2.start++; log->v2.chars++; } else { - log->buf[(log->v1.start + log->v1.size) & + lbuf[(log->v1.start + log->v1.size) & LOGBUFF_MASK] = *p; if (log->v1.size < LOGBUFF_LEN) log->v1.size++; diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index e179e4f..ced7ba6 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -244,6 +244,8 @@

#define CFG_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */ #define CONFIG_LOGBUFFER +#define CONFIG_ALT_LH_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP1) +#define CONFIG_ALT_LB_ADDR (CFG_OCM_BASE) #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */

/*----------------------------------------------------------------------- diff --git a/include/ppc440.h b/include/ppc440.h index 6e3b68d..10517cb 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -1434,6 +1434,8 @@ #define GPT0_COMP5 0x00000094 #define GPT0_COMP4 0x00000090 #define GPT0_COMP3 0x0000008C +#define GPT0_COMP2 0x00000088 +#define GPT0_COMP1 0x00000084

#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define SDR0_USB2D0CR 0x0320 diff --git a/lib_ppc/board.c b/lib_ppc/board.c index fbf1c5d..ee0213e 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -436,10 +436,12 @@ void board_init_f (ulong bootflag) addr = CFG_SDRAM_BASE + get_effective_memsize();

#ifdef CONFIG_LOGBUFFER +#ifndef CONFIG_ALT_LB_ADDR /* reserve kernel log buffer */ addr -= (LOGBUFF_RESERVE); debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr); #endif +#endif

#ifdef CONFIG_PRAM /* @@ -1126,9 +1128,11 @@ void board_init_r (gd_t *id, ulong dest_addr) pram=0; #endif #ifdef CONFIG_LOGBUFFER +#ifndef CONFIG_ALT_LB_ADDR /* Also take the logbuffer into account (pram is in kB) */ pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024; #endif +#endif sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram); setenv ("mem", (char *)memsz); }

-- 1.5.4.2

Wolfgang Denk

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] Fix backlight in the lwmon5 POST.

From: Yuri Tikhonov yur@pollux.denx.de

Backlight was switcehd on even when temperature was too low.

Signed-off-by: Dmitry Rakhchev rda@emcraft.com Signed-off-by: Yuri Tikhonov yur@emcraft.com --- board/lwmon5/lwmon5.c | 24 +++++++++++++++++++++--- post/board/lwmon5/fpga.c | 10 ---------- post/board/lwmon5/sysmon.c | 33 ++++++++------------------------- 3 files changed, 29 insertions(+), 38 deletions(-)

diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 7c5f6cc..e5fa259 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -567,11 +567,13 @@ unsigned int board_video_init (void) return CFG_LIME_BASE_0; }

-void board_backlight_switch (int flag) +#define DEFAULT_BRIGHTNESS 0x64 + +static void board_backlight_brightness(int brightness) { - if (flag) { + if (brightness > 0) { /* pwm duty, lamp on */ - out_be32((void *)(CFG_FPGA_BASE_0 + 0x00000024), 0x64); + out_be32((void *)(CFG_FPGA_BASE_0 + 0x00000024), brightness); out_be32((void *)(CFG_FPGA_BASE_0 + 0x00000020), 0x701); } else { /* lamp off */ @@ -580,6 +582,22 @@ void board_backlight_switch (int flag) } }

+void board_backlight_switch (int flag) +{ + char * param; + int rc; + + if (flag) { + param = getenv("brightness"); + rc = param ? simple_strtol(param, NULL, 10) : -1; + if (rc < 0) + rc = DEFAULT_BRIGHTNESS; + } else { + rc = 0; + } + board_backlight_brightness(rc); +} + #if defined(CONFIG_CONSOLE_EXTRA_INFO) /* * Return text to be printed besides the logo. diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c index b87fc52..162174c 100644 --- a/post/board/lwmon5/fpga.c +++ b/post/board/lwmon5/fpga.c @@ -41,16 +41,6 @@ DECLARE_GLOBAL_DATA_PTR; #define FPGA_RAM_END 0xC4203FFF #define FPGA_STAT 0xC400000C

-#define FPGA_PWM_CTRL_REG 0xC4000020 -#define FPGA_PWM_TV_REG 0xC4000024 - -/* Turn on backlight, set brightness */ -void fpga_backlight_enable(int pwm) -{ - out_be16((void *)FPGA_PWM_CTRL_REG, 0x0701); - out_be16((void *)FPGA_PWM_TV_REG, pwm); -} - #if CONFIG_POST & CFG_POST_BSPEC3

static int one_scratch_test(uint value) diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c index 0eae4c1..f7e51a3 100644 --- a/post/board/lwmon5/sysmon.c +++ b/post/board/lwmon5/sysmon.c @@ -49,18 +49,16 @@ #include <watchdog.h> #include <i2c.h>

+#if defined(CONFIG_VIDEO) +#include <mb862xx.h> +#endif + #if CONFIG_POST & CFG_POST_SYSMON

DECLARE_GLOBAL_DATA_PTR;

-#define DEFAULT_BRIGHTNESS 50 - /* from dspic.c */ extern int dspic_read(ushort reg); -/* from fpga.c */ -extern void fpga_backlight_enable(int v); - -static int sysmon_temp_invalid;

#define RELOC(x) if (x != NULL) x = (void *) ((ulong) (x) + gd->reloc_off)

@@ -70,7 +68,6 @@ typedef struct sysmon_table_s sysmon_table_t; static void sysmon_dspic_init (sysmon_t * this); static int sysmon_dspic_read (sysmon_t * this, uint addr); static void sysmon_backlight_disable (sysmon_table_t * this); -static void sysmon_backlight_enable (sysmon_table_t * this);

struct sysmon_s { @@ -120,7 +117,7 @@ static sysmon_table_t sysmon_table[] = 100, 1000, -0x8000, 0x7FFF, 0xFFFF, 0x8000+4750, 0x8000+5250, 0, 0x8000+4750, 0x8000+5250, 0, 0x12CA},

- {"+ 5 V standby", "V", &sysmon_dspic, NULL, sysmon_backlight_enable, + {"+ 5 V standby", "V", &sysmon_dspic, NULL, NULL, 100, 1000, -0x8000, 0x7FFF, 0xFFFF, 0x8000+4750, 0x8000+5250, 0, 0x8000+4750, 0x8000+5250, 0, 0x12C6}, }; @@ -205,23 +202,9 @@ static int sysmon_dspic_read (sysmon_t * this, uint addr)

static void sysmon_backlight_disable (sysmon_table_t * this) { - if (!this->val_valid_alt) - sysmon_temp_invalid = 1; -} - -static void sysmon_backlight_enable (sysmon_table_t * this) -{ - char * param; - int rc; - - if (!sysmon_temp_invalid) { - param = getenv("brightness"); - rc = param ? simple_strtol(param, NULL, 10) : -1; - if (rc >= 0) - fpga_backlight_enable(rc); - else - fpga_backlight_enable(DEFAULT_BRIGHTNESS); - } +#if defined(CONFIG_VIDEO) + board_backlight_switch(this->val_valid_alt); +#endif }

int sysmon_post_test (int flags)

-- 1.5.4.2

Wolfgang Denk

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] lwmon5: Fix register test logic to match the specific GDC h/w.

From: Yuri Tikhonov yur@pollux.denx.de

Signed-off-by: Dmitry Rakhchev rda@emcraft.com Signed-off-by: Yuri Tikhonov yur@emcraft.com --- post/board/lwmon5/gdc.c | 18 ++++++++++++------ 1 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/post/board/lwmon5/gdc.c b/post/board/lwmon5/gdc.c index 0e4f0fd..aa1eee0 100644 --- a/post/board/lwmon5/gdc.c +++ b/post/board/lwmon5/gdc.c @@ -35,7 +35,7 @@

DECLARE_GLOBAL_DATA_PTR;

-#define GDC_SCRATCH_REG 0xC1FF8008 +#define GDC_SCRATCH_REG 0xC1FF8044 #define GDC_VERSION_REG 0xC1FF8084 #define GDC_RAM_START 0xC0000000 #define GDC_RAM_END 0xC2000000 @@ -44,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR;

static int gdc_test_reg_one(uint value) { - int ret = 0; + int ret; uint read_value;

/* write test pattern */ @@ -56,10 +56,9 @@ static int gdc_test_reg_one(uint value) if (read_value != value) { post_log("GDC SCRATCH test failed write %08X, read %08X\n", value, read_value); - ret = 1; }

- return ret; + return (read_value != value); }

/* Verify GDC, get memory size */ @@ -71,9 +70,16 @@ int gdc_post_test(int flags) post_log("\n"); old_value = in_be32((void *)GDC_SCRATCH_REG);

- if (gdc_test_reg_one(0x55555555)) + /* + * GPIOC2 register behaviour: the LIME graphics processor has a + * maximum of 5 GPIO ports that can be used in this hardware + * configuration. Thus only the bits for these 5 GPIOs can be + * activated in the GPIOC2 register. All other bits will always be + * read as zero. + */ + if (gdc_test_reg_one(0x00150015)) ret = 1; - if (gdc_test_reg_one(0xAAAAAAAA)) + if (gdc_test_reg_one(0x000A000A)) ret = 1;

out_be32((void *)GDC_SCRATCH_REG, old_value);

-- 1.5.4.2

Wolfgang Denk

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] POST: preparations for moving CONFIG_POST to Makefiles

From: Yuri Tikhonov yur@emcraft.com

Remove CONFIG_POST ifdefs from the post/ source files.

diff --git a/post/board/lwmon/sysmon.c b/post/board/lwmon/sysmon.c index f61d598..ea8b5a9 100644 --- a/post/board/lwmon/sysmon.c +++ b/post/board/lwmon/sysmon.c @@ -24,8 +24,6 @@ #include <post.h> #include <common.h>

-#ifdef CONFIG_POST - /* * SYSMON test * @@ -328,4 +326,3 @@ int sysmon_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_SYSMON */ -#endif /* CONFIG_POST */ diff --git a/post/board/lwmon5/dsp.c b/post/board/lwmon5/dsp.c index 7b53af9..a96ac7d 100644 --- a/post/board/lwmon5/dsp.c +++ b/post/board/lwmon5/dsp.c @@ -24,11 +24,8 @@

#include <common.h>

-#ifdef CONFIG_POST - #include <post.h>

- #if CONFIG_POST & CFG_POST_DSP #include <asm/io.h>

@@ -54,5 +51,3 @@ int dsp_post_test(int flags) }

#endif /* CONFIG_POST & CFG_POST_DSP */ -#endif /* CONFIG_POST */ - diff --git a/post/board/lwmon5/dspic.c b/post/board/lwmon5/dspic.c index f1c9c15..eb1c31c 100644 --- a/post/board/lwmon5/dspic.c +++ b/post/board/lwmon5/dspic.c @@ -24,8 +24,6 @@

#include <common.h>

-#ifdef CONFIG_POST - /* There are two tests for dsPIC currently implemented: * 1. dsPIC ready test. Done in board_early_init_f(). Only result verified here. * 2. dsPIC POST result test. This test gets dsPIC POST codes and version. @@ -105,5 +103,3 @@ int dspic_post_test(int flags) }

#endif /* CONFIG_POST & CFG_POST_BSPEC2 */ -#endif /* CONFIG_POST */ - diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c index 162174c..b48390b 100644 --- a/post/board/lwmon5/fpga.c +++ b/post/board/lwmon5/fpga.c @@ -23,8 +23,6 @@ */ #include <common.h>

-#ifdef CONFIG_POST - /* This test performs testing of FPGA SCRATCH register, * gets FPGA version and run get_ram_size() on FPGA memory */ @@ -94,5 +92,3 @@ int fpga_post_test(int flags) }

#endif /* CONFIG_POST & CFG_POST_BSPEC3 */ -#endif /* CONFIG_POST */ - diff --git a/post/board/lwmon5/gdc.c b/post/board/lwmon5/gdc.c index aa1eee0..bc16685 100644 --- a/post/board/lwmon5/gdc.c +++ b/post/board/lwmon5/gdc.c @@ -23,8 +23,6 @@ */ #include <common.h>

-#ifdef CONFIG_POST - /* This test attempts to verify board GDC. A scratch register tested, then * simple memory test (get_ram_size()) run over GDC memory. */ @@ -96,5 +94,3 @@ int gdc_post_test(int flags) return ret; } #endif /* CONFIG_POST & CFG_POST_BSPEC4 */ -#endif /* CONFIG_POST */ - diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c index f7e51a3..15661e3 100644 --- a/post/board/lwmon5/sysmon.c +++ b/post/board/lwmon5/sysmon.c @@ -25,8 +25,6 @@ #include <post.h> #include <common.h>

-#ifdef CONFIG_POST - /* * SYSMON test * @@ -245,4 +243,3 @@ int sysmon_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_SYSMON */ -#endif /* CONFIG_POST */ diff --git a/post/board/lwmon5/watchdog.c b/post/board/lwmon5/watchdog.c index ad9e6f3..699266b 100644 --- a/post/board/lwmon5/watchdog.c +++ b/post/board/lwmon5/watchdog.c @@ -29,8 +29,6 @@ * trigger watchdog reset. */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_WATCHDOG @@ -128,5 +126,3 @@ int lwmon5_watchdog_post_test(int flags)

#endif /* CONFIG_POST & CFG_POST_WATCHDOG */ -#endif /* CONFIG_POST */ - diff --git a/post/board/netta/codec.c b/post/board/netta/codec.c index e881752..115e331 100644 --- a/post/board/netta/codec.c +++ b/post/board/netta/codec.c @@ -31,8 +31,6 @@ * in the board specific function. */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_CODEC @@ -45,4 +43,3 @@ int codec_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_CODEC */ -#endif /* CONFIG_POST */ diff --git a/post/board/netta/dsp.c b/post/board/netta/dsp.c index 63531a2..dcef4e8 100644 --- a/post/board/netta/dsp.c +++ b/post/board/netta/dsp.c @@ -31,8 +31,6 @@ * in the board specific function. */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_DSP @@ -45,4 +43,3 @@ int dsp_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_DSP */ -#endif /* CONFIG_POST */ diff --git a/post/cpu/mpc8xx/cache.c b/post/cpu/mpc8xx/cache.c index 501465c..36965a1 100644 --- a/post/cpu/mpc8xx/cache.c +++ b/post/cpu/mpc8xx/cache.c @@ -29,8 +29,6 @@ * several test scenarios. */

-#ifdef CONFIG_POST - #include <post.h> #include <watchdog.h>

@@ -78,4 +76,3 @@ int cache_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_CACHE */ -#endif /* CONFIG_POST */ diff --git a/post/cpu/mpc8xx/cache_8xx.S b/post/cpu/mpc8xx/cache_8xx.S index 2d41b55..a3fc39b 100644 --- a/post/cpu/mpc8xx/cache_8xx.S +++ b/post/cpu/mpc8xx/cache_8xx.S @@ -22,7 +22,6 @@

#include <config.h>

-#ifdef CONFIG_POST #if defined(CONFIG_MPC823) || \ defined(CONFIG_MPC850) || \ defined(CONFIG_MPC855) || \ @@ -492,4 +491,3 @@ cache_post_test6_data:

#endif /* CONFIG_MPC823 || MPC850 || MPC855 || MPC860 */ #endif /* CONFIG_POST & CFG_POST_CACHE */ -#endif /* CONFIG_POST */ diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c index 8c87b59..2fa5cf4 100644 --- a/post/cpu/mpc8xx/ether.c +++ b/post/cpu/mpc8xx/ether.c @@ -35,8 +35,6 @@ * TEST_NUM - number of tests */

-#ifdef CONFIG_POST - #include <post.h> #if CONFIG_POST & CFG_POST_ETHER #if defined(CONFIG_8xx) @@ -627,5 +625,3 @@ int ether_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_ETHER */ - -#endif /* CONFIG_POST */ diff --git a/post/cpu/mpc8xx/spr.c b/post/cpu/mpc8xx/spr.c index 330b977..83f04da 100644 --- a/post/cpu/mpc8xx/spr.c +++ b/post/cpu/mpc8xx/spr.c @@ -33,8 +33,6 @@ * corresponding table value. */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_SPR @@ -149,4 +147,3 @@ int spr_post_test (int flags) return ret; } #endif /* CONFIG_POST & CFG_POST_SPR */ -#endif /* CONFIG_POST */ diff --git a/post/cpu/mpc8xx/uart.c b/post/cpu/mpc8xx/uart.c index fd97e38..635debe 100644 --- a/post/cpu/mpc8xx/uart.c +++ b/post/cpu/mpc8xx/uart.c @@ -36,8 +36,6 @@ * TEST_NUM - number of tests */

-#ifdef CONFIG_POST - #include <post.h> #if CONFIG_POST & CFG_POST_UART #if defined(CONFIG_8xx) @@ -556,5 +554,3 @@ int uart_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_UART */ - -#endif /* CONFIG_POST */ diff --git a/post/cpu/mpc8xx/usb.c b/post/cpu/mpc8xx/usb.c index 0c74cfa..5877981 100644 --- a/post/cpu/mpc8xx/usb.c +++ b/post/cpu/mpc8xx/usb.c @@ -34,8 +34,6 @@ * Initialization Example. */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_USB @@ -265,5 +263,3 @@ int usb_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_USB */ - -#endif /* CONFIG_POST */ diff --git a/post/cpu/mpc8xx/watchdog.c b/post/cpu/mpc8xx/watchdog.c index 48c4282..f94158a 100644 --- a/post/cpu/mpc8xx/watchdog.c +++ b/post/cpu/mpc8xx/watchdog.c @@ -33,8 +33,6 @@ * reboots, on the second iteration the test routine reports a success. */

-#ifdef CONFIG_POST - #include <post.h> #include <watchdog.h>

@@ -75,4 +73,3 @@ int watchdog_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_WATCHDOG */ -#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/cache.c b/post/cpu/ppc4xx/cache.c index 466ca92..be6a2bf 100644 --- a/post/cpu/ppc4xx/cache.c +++ b/post/cpu/ppc4xx/cache.c @@ -31,8 +31,6 @@ * several test scenarios. */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_CACHE @@ -122,4 +120,3 @@ int cache_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_CACHE */ -#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/cache_4xx.S b/post/cpu/ppc4xx/cache_4xx.S index d5cb075..455ffa0 100644 --- a/post/cpu/ppc4xx/cache_4xx.S +++ b/post/cpu/ppc4xx/cache_4xx.S @@ -25,8 +25,6 @@

#include <config.h>

-#ifdef CONFIG_POST - #include <post.h> #include <ppc_asm.tmpl> #include <ppc_defs.h> @@ -489,4 +487,3 @@ cache_post_test_inst: blr

#endif /* CONFIG_POST & CFG_POST_CACHE */ -#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/denali_ecc.c b/post/cpu/ppc4xx/denali_ecc.c index 439f80d..12a1bbf 100644 --- a/post/cpu/ppc4xx/denali_ecc.c +++ b/post/cpu/ppc4xx/denali_ecc.c @@ -31,7 +31,7 @@ #include <common.h> #include <watchdog.h>

-#if defined(CONFIG_POST) && (defined(CONFIG_440EPX) || defined(CONFIG_440GRX)) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)

#include <post.h>

@@ -268,4 +268,4 @@ int ecc_post_test(int flags) return ret; } #endif /* CONFIG_POST & CFG_POST_ECC */ -#endif /* defined(CONFIG_POST) && ... */ +#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */ diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c index 4ac7491..ccbfcf9 100644 --- a/post/cpu/ppc4xx/ether.c +++ b/post/cpu/ppc4xx/ether.c @@ -37,8 +37,6 @@ * TEST_NUM - number of tests */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_ETHER @@ -430,4 +428,3 @@ out_free: }

#endif /* CONFIG_POST & CFG_POST_ETHER */ -#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/fpu.c b/post/cpu/ppc4xx/fpu.c index 0c26fe0..fff4169 100644 --- a/post/cpu/ppc4xx/fpu.c +++ b/post/cpu/ppc4xx/fpu.c @@ -25,7 +25,6 @@

#include <config.h>

-#ifdef CONFIG_POST #if defined(CONFIG_440EP) || \ defined(CONFIG_440EPX)

@@ -56,4 +55,3 @@ void fpu_enable(void) }

#endif -#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c index 37c9559..6152eb2 100644 --- a/post/cpu/ppc4xx/spr.c +++ b/post/cpu/ppc4xx/spr.c @@ -35,8 +35,6 @@ * corresponding table value. */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_SPR @@ -199,4 +197,3 @@ int spr_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_SPR */ -#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c index f47b48e..27cfb91 100644 --- a/post/cpu/ppc4xx/uart.c +++ b/post/cpu/ppc4xx/uart.c @@ -32,8 +32,6 @@ * characters are transmitted. */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_UART @@ -389,4 +387,3 @@ int uart_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_UART */ -#endif /* CONFIG_POST */ diff --git a/post/cpu/ppc4xx/watchdog.c b/post/cpu/ppc4xx/watchdog.c index bd4f4c9..7fdecb4 100644 --- a/post/cpu/ppc4xx/watchdog.c +++ b/post/cpu/ppc4xx/watchdog.c @@ -35,8 +35,6 @@ * reboots, on the second iteration the test routine reports a success. */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_WATCHDOG @@ -68,4 +66,3 @@ int watchdog_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_WATCHDOG */ -#endif /* CONFIG_POST */ diff --git a/post/drivers/i2c.c b/post/drivers/i2c.c index 1b2e644..f54fe99 100644 --- a/post/drivers/i2c.c +++ b/post/drivers/i2c.c @@ -23,8 +23,6 @@

#include <common.h>

-#ifdef CONFIG_POST - /* * I2C test * @@ -91,4 +89,3 @@ int i2c_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_I2C */ -#endif /* CONFIG_POST */ diff --git a/post/drivers/memory.c b/post/drivers/memory.c index fb96985..e94d92c 100644 --- a/post/drivers/memory.c +++ b/post/drivers/memory.c @@ -150,8 +150,6 @@ * the whole RAM. */

-#ifdef CONFIG_POST - #include <post.h> #include <watchdog.h>

@@ -483,4 +481,3 @@ int memory_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_MEMORY */ -#endif /* CONFIG_POST */ diff --git a/post/drivers/rtc.c b/post/drivers/rtc.c index 7d4f9b8..4afe8e6 100644 --- a/post/drivers/rtc.c +++ b/post/drivers/rtc.c @@ -38,8 +38,6 @@ * nonleap-years. */

-#ifdef CONFIG_POST - #include <post.h> #include <rtc.h>

@@ -180,4 +178,3 @@ int rtc_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_RTC */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/andi.c b/post/lib_ppc/andi.c index 7ddf2ab..e3315bf 100644 --- a/post/lib_ppc/andi.c +++ b/post/lib_ppc/andi.c @@ -32,8 +32,6 @@ * different sets of operand registers and result registers. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -120,4 +118,3 @@ int cpu_post_test_andi (void) }

#endif -#endif diff --git a/post/lib_ppc/asm.S b/post/lib_ppc/asm.S index 1279176..6220ed2 100644 --- a/post/lib_ppc/asm.S +++ b/post/lib_ppc/asm.S @@ -22,8 +22,6 @@

#include <config.h>

-#ifdef CONFIG_POST - #include <post.h> #include <ppc_asm.tmpl> #include <ppc_defs.h> @@ -358,4 +356,3 @@ cpu_post_complex_2_loop: blr

#endif -#endif diff --git a/post/lib_ppc/b.c b/post/lib_ppc/b.c index 6e276c4..45b9ff2 100644 --- a/post/lib_ppc/b.c +++ b/post/lib_ppc/b.c @@ -37,8 +37,6 @@ * linked in U-Boot at build time. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -194,4 +192,3 @@ int cpu_post_test_b (void) }

#endif -#endif diff --git a/post/lib_ppc/cmp.c b/post/lib_ppc/cmp.c index 789a24c..89f754a 100644 --- a/post/lib_ppc/cmp.c +++ b/post/lib_ppc/cmp.c @@ -36,8 +36,6 @@ * the result in and the expected result. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -130,4 +128,3 @@ int cpu_post_test_cmp (void) }

#endif -#endif diff --git a/post/lib_ppc/cmpi.c b/post/lib_ppc/cmpi.c index e0c2aaf..0afdd71 100644 --- a/post/lib_ppc/cmpi.c +++ b/post/lib_ppc/cmpi.c @@ -36,8 +36,6 @@ * the result in and the expected result. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -130,4 +128,3 @@ int cpu_post_test_cmpi (void) }

#endif -#endif diff --git a/post/lib_ppc/complex.c b/post/lib_ppc/complex.c index 033584b..271392a 100644 --- a/post/lib_ppc/complex.c +++ b/post/lib_ppc/complex.c @@ -31,8 +31,6 @@ * calculations, but probably under different timing conditions, etc. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -123,4 +121,3 @@ int cpu_post_test_complex (void) }

#endif -#endif diff --git a/post/lib_ppc/cpu.c b/post/lib_ppc/cpu.c index 4ab6d2d..5c7f761 100644 --- a/post/lib_ppc/cpu.c +++ b/post/lib_ppc/cpu.c @@ -32,8 +32,6 @@ * For more details refer to post/cpu/ *.c files. */

-#ifdef CONFIG_POST - #include <watchdog.h> #include <post.h> #include <asm/mmu.h> @@ -147,4 +145,3 @@ int cpu_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_CPU */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/cr.c b/post/lib_ppc/cr.c index da6ef37..0bd9e74 100644 --- a/post/lib_ppc/cr.c +++ b/post/lib_ppc/cr.c @@ -46,8 +46,6 @@ * expected one. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -353,4 +351,3 @@ int cpu_post_test_cr (void) }

#endif -#endif diff --git a/post/lib_ppc/fpu/20001122-1.c b/post/lib_ppc/fpu/20001122-1.c index f689b82..dece614 100644 --- a/post/lib_ppc/fpu/20001122-1.c +++ b/post/lib_ppc/fpu/20001122-1.c @@ -26,8 +26,6 @@

#include <common.h>

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_FPU @@ -59,4 +57,3 @@ int fpu_post_test_math1 (void) }

#endif /* CONFIG_POST & CFG_POST_FPU */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/20010114-2.c b/post/lib_ppc/fpu/20010114-2.c index 6e60507..8a17217 100644 --- a/post/lib_ppc/fpu/20010114-2.c +++ b/post/lib_ppc/fpu/20010114-2.c @@ -26,8 +26,6 @@

#include <common.h>

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_FPU @@ -63,4 +61,3 @@ int fpu_post_test_math2 (void) }

#endif /* CONFIG_POST & CFG_POST_FPU */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/20010226-1.c b/post/lib_ppc/fpu/20010226-1.c index b2c47e3..f366252 100644 --- a/post/lib_ppc/fpu/20010226-1.c +++ b/post/lib_ppc/fpu/20010226-1.c @@ -26,8 +26,6 @@

#include <common.h>

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_FPU @@ -51,4 +49,3 @@ int fpu_post_test_math3 (void) }

#endif /* CONFIG_POST & CFG_POST_FPU */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/980619-1.c b/post/lib_ppc/fpu/980619-1.c index 990aa0c..7f26482 100644 --- a/post/lib_ppc/fpu/980619-1.c +++ b/post/lib_ppc/fpu/980619-1.c @@ -26,8 +26,6 @@

#include <common.h>

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_FPU @@ -57,4 +55,3 @@ int fpu_post_test_math4 (void) }

#endif /* CONFIG_POST & CFG_POST_FPU */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/acc1.c b/post/lib_ppc/fpu/acc1.c index 4cecbf6..921282e 100644 --- a/post/lib_ppc/fpu/acc1.c +++ b/post/lib_ppc/fpu/acc1.c @@ -26,8 +26,6 @@

#include <common.h>

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_FPU @@ -54,4 +52,3 @@ int fpu_post_test_math5 (void) }

#endif /* CONFIG_POST & CFG_POST_FPU */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/compare-fp-1.c b/post/lib_ppc/fpu/compare-fp-1.c index d866ad5..be8f620 100644 --- a/post/lib_ppc/fpu/compare-fp-1.c +++ b/post/lib_ppc/fpu/compare-fp-1.c @@ -28,8 +28,6 @@

#include <common.h>

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_FPU @@ -222,4 +220,3 @@ int fpu_post_test_math6 (void) }

#endif /* CONFIG_POST & CFG_POST_FPU */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/fpu.c b/post/lib_ppc/fpu/fpu.c index 07dcba8..9ddb67a 100644 --- a/post/lib_ppc/fpu/fpu.c +++ b/post/lib_ppc/fpu/fpu.c @@ -34,8 +34,6 @@ * For more details refer to post/cpu/ *.c files. */

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_FPU @@ -89,4 +87,3 @@ int fpu_post_test (int flags) }

#endif /* CONFIG_POST & CFG_POST_FPU */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/fpu/mul-subnormal-single-1.c b/post/lib_ppc/fpu/mul-subnormal-single-1.c index 67f48da..7e6fe87 100644 --- a/post/lib_ppc/fpu/mul-subnormal-single-1.c +++ b/post/lib_ppc/fpu/mul-subnormal-single-1.c @@ -28,8 +28,6 @@

#include <common.h>

-#ifdef CONFIG_POST - #include <post.h>

#if CONFIG_POST & CFG_POST_FPU @@ -100,4 +98,3 @@ int fpu_post_test_math7 (void) }

#endif /* CONFIG_POST & CFG_POST_FPU */ -#endif /* CONFIG_POST */ diff --git a/post/lib_ppc/load.c b/post/lib_ppc/load.c index 393c568..86bc223 100644 --- a/post/lib_ppc/load.c +++ b/post/lib_ppc/load.c @@ -41,8 +41,6 @@ * register (it must change for "load with update" instructions). */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -252,4 +250,3 @@ int cpu_post_test_load (void) }

#endif -#endif diff --git a/post/lib_ppc/multi.c b/post/lib_ppc/multi.c index 8724384..5d3f584 100644 --- a/post/lib_ppc/multi.c +++ b/post/lib_ppc/multi.c @@ -33,8 +33,6 @@ * of the source and target buffers are then compared. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -78,4 +76,3 @@ int cpu_post_test_multi (void) }

#endif -#endif diff --git a/post/lib_ppc/rlwimi.c b/post/lib_ppc/rlwimi.c index f65f79a..1d8e61e 100644 --- a/post/lib_ppc/rlwimi.c +++ b/post/lib_ppc/rlwimi.c @@ -32,8 +32,6 @@ * different sets of operand registers and result registers. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -159,4 +157,3 @@ int cpu_post_test_rlwimi (void) }

#endif -#endif diff --git a/post/lib_ppc/rlwinm.c b/post/lib_ppc/rlwinm.c index e240c41..113e79d 100644 --- a/post/lib_ppc/rlwinm.c +++ b/post/lib_ppc/rlwinm.c @@ -32,8 +32,6 @@ * different sets of operand registers and result registers. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -152,4 +150,3 @@ int cpu_post_test_rlwinm (void) }

#endif -#endif diff --git a/post/lib_ppc/rlwnm.c b/post/lib_ppc/rlwnm.c index 523cf4d..a6684bf 100644 --- a/post/lib_ppc/rlwnm.c +++ b/post/lib_ppc/rlwnm.c @@ -32,8 +32,6 @@ * different sets of operand registers and result registers. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -162,4 +160,3 @@ int cpu_post_test_rlwnm (void) }

#endif -#endif diff --git a/post/lib_ppc/srawi.c b/post/lib_ppc/srawi.c index 91c82c9..8c70007 100644 --- a/post/lib_ppc/srawi.c +++ b/post/lib_ppc/srawi.c @@ -32,8 +32,6 @@ * different sets of operand registers and result registers. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -153,4 +151,3 @@ int cpu_post_test_srawi (void) }

#endif -#endif diff --git a/post/lib_ppc/store.c b/post/lib_ppc/store.c index f495bf2..09ec485 100644 --- a/post/lib_ppc/store.c +++ b/post/lib_ppc/store.c @@ -41,8 +41,6 @@ * with update" instructions). */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -232,4 +230,3 @@ int cpu_post_test_store (void) }

#endif -#endif diff --git a/post/lib_ppc/string.c b/post/lib_ppc/string.c index bd83bd1..b2daa88 100644 --- a/post/lib_ppc/string.c +++ b/post/lib_ppc/string.c @@ -33,8 +33,6 @@ * of the source and target buffers are then compared. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -103,4 +101,3 @@ int cpu_post_test_string (void) }

#endif -#endif diff --git a/post/lib_ppc/three.c b/post/lib_ppc/three.c index c2d7476..a7f1a86 100644 --- a/post/lib_ppc/three.c +++ b/post/lib_ppc/three.c @@ -35,8 +35,6 @@ * different sets of operand registers and result registers. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -256,4 +254,3 @@ int cpu_post_test_three (void) }

#endif -#endif diff --git a/post/lib_ppc/threei.c b/post/lib_ppc/threei.c index 79f0178..bbb4f50 100644 --- a/post/lib_ppc/threei.c +++ b/post/lib_ppc/threei.c @@ -34,8 +34,6 @@ * different sets of operand registers and result registers. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -134,4 +132,3 @@ int cpu_post_test_threei (void) }

#endif -#endif diff --git a/post/lib_ppc/threex.c b/post/lib_ppc/threex.c index 2c72063..6aac937 100644 --- a/post/lib_ppc/threex.c +++ b/post/lib_ppc/threex.c @@ -35,8 +35,6 @@ * different sets of operand registers and result registers. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -226,4 +224,3 @@ int cpu_post_test_threex (void) }

#endif -#endif diff --git a/post/lib_ppc/two.c b/post/lib_ppc/two.c index cfbac5e..3d6b3c0 100644 --- a/post/lib_ppc/two.c +++ b/post/lib_ppc/two.c @@ -35,8 +35,6 @@ * different sets of operand registers and result registers. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -173,4 +171,3 @@ int cpu_post_test_two (void) }

#endif -#endif diff --git a/post/lib_ppc/twox.c b/post/lib_ppc/twox.c index 48d9954..7417a36 100644 --- a/post/lib_ppc/twox.c +++ b/post/lib_ppc/twox.c @@ -35,8 +35,6 @@ * different sets of operand registers and result registers. */

-#ifdef CONFIG_POST - #include <post.h> #include "cpu_asm.h"

@@ -173,4 +171,3 @@ int cpu_post_test_twox (void) }

#endif -#endif diff --git a/post/post.c b/post/post.c index 1df0657..c016c3a 100644 --- a/post/post.c +++ b/post/post.c @@ -30,8 +30,6 @@ #include <logbuff.h> #endif

-#ifdef CONFIG_POST - DECLARE_GLOBAL_DATA_PTR;

#define POST_MAX_NUMBER 32 @@ -442,5 +440,3 @@ unsigned long post_time_ms (unsigned long base) return 0; /* Not implemented yet */ #endif } - -#endif /* CONFIG_POST */ diff --git a/post/tests.c b/post/tests.c index 53d01e3..36473e3 100644 --- a/post/tests.c +++ b/post/tests.c @@ -27,8 +27,6 @@

#include <common.h>

-#ifdef CONFIG_POST - #include <post.h>

extern int cache_post_test (int flags); @@ -278,5 +276,3 @@ struct post_test post_list[] = };

unsigned int post_list_size = sizeof (post_list) / sizeof (struct post_test); - -#endif /* CONFIG_POST */

-- 1.5.4.2

Wolfgang Denk

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] POST: move CONFIG_POST to Makefiles

From: Yuri Tikhonov yur@emcraft.com

Introduce the new logical option CONFIG_HAS_POST which is set when the platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles to determine should the POST libs be compiled for the selected target platform, or not.

To avoid breaking u-boot linking process, the empty post/libpost.a file is created for platforms which do not have POSTs.

Signed-off-by: Yuri Tikhonov yur@emcraft.com Signed-off-by: Wolfgang Denk wd@denx.de --- Makefile | 10 +-------- include/common.h | 11 ++++++++++ post/Makefile | 47 ++++++++++++++++++++++++++++++++++++++++--- post/board/lwmon5/Makefile | 3 +- post/cpu/ppc4xx/Makefile | 5 ++- post/drivers/Makefile | 6 +--- post/lib_ppc/Makefile | 11 ++++----- post/lib_ppc/fpu/Makefile | 6 ++-- post/rules.mk | 2 + 9 files changed, 72 insertions(+), 29 deletions(-)

diff --git a/Makefile b/Makefile index 4fde699..b2b59b2 100644 --- a/Makefile +++ b/Makefile @@ -233,18 +233,10 @@ LIBS += drivers/rtc/librtc.a LIBS += drivers/serial/libserial.a LIBS += drivers/usb/libusb.a LIBS += drivers/video/libvideo.a -LIBS += post/libpost.a post/drivers/libpostdrivers.a -LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \ - "post/lib_$(ARCH)/libpost$(ARCH).a"; fi) -LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \ - "post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi) -LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \ - "post/cpu/$(CPU)/libpost$(CPU).a"; fi) -LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \ - "post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi) LIBS += common/libcommon.a LIBS += libfdt/libfdt.a LIBS += api/libapi.a +LIBS += post/libpost.a

LIBS := $(addprefix $(obj),$(LIBS)) .PHONY : $(LIBS) $(VERSION_FILE) diff --git a/include/common.h b/include/common.h index 673afdd..8d435b9 100644 --- a/include/common.h +++ b/include/common.h @@ -672,4 +672,15 @@ void inline show_boot_progress (int val);

#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))

+/* Multicore arch functions */ +#ifdef CONFIG_MP +int cpu_status(int nr); +int cpu_reset(int nr); +int cpu_release(int nr, int argc, char *argv[]); +#endif + +#ifdef CONFIG_POST +#define CONFIG_HAS_POST +#endif + #endif /* __COMMON_H_ */ diff --git a/post/Makefile b/post/Makefile index f32af95..02b5154 100644 --- a/post/Makefile +++ b/post/Makefile @@ -21,11 +21,50 @@ # MA 02111-1307 USA #

+include $(TOPDIR)/include/autoconf.mk

-SUBDIRS = drivers cpu lib_$(ARCH) board/$(BOARDDIR) +LIB = libpost.a +GPLIB-$(CONFIG_HAS_POST) += libgenpost.a +COBJS-$(CONFIG_HAS_POST) += post.o tests.o

-LIB = libpost.a +SPLIB-$(CONFIG_HAS_POST) = drivers/libpostdrivers.a +SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d lib_$(ARCH) ]; then echo \ + "lib_$(ARCH)/libpost$(ARCH).a"; fi) +SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d lib_$(ARCH)/fpu ]; then echo \ + "lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi) +SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d cpu/$(CPU) ]; then echo \ + "cpu/$(CPU)/libpost$(CPU).a"; fi) +SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d board/$(BOARD) ]; then echo \ + "board/$(BOARD)/libpost$(BOARD).a"; fi)

-COBJS = post.o tests.o +GPLIB := $(GPLIB-y) +SPLIB := $(SPLIB-y) +COBJS := $(COBJS-y) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +LIB := $(obj)$(LIB)

-include $(TOPDIR)/post/rules.mk +all: $(LIB) + +# generic POST library +$(GPLIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +# specific POST libraries +$(SPLIB): $(obj).depend + $(MAKE) -C $(dir $(subst $(obj),,$@)) + +# the POST lib archive +$(LIB): $(GPLIB) $(SPLIB) + (echo create $(LIB); for lib in $(GPLIB) $(SPLIB) ; \ + do echo addlib $$lib; done; echo save) \ + | $(AR) -M + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/post/board/lwmon5/Makefile b/post/board/lwmon5/Makefile index 5a92d1c..3cb6426 100644 --- a/post/board/lwmon5/Makefile +++ b/post/board/lwmon5/Makefile @@ -20,9 +20,10 @@ # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA +include $(TOPDIR)/include/autoconf.mk

LIB = libpostlwmon5.a

-COBJS = sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o +COBJS-$(CONFIG_HAS_POST) += sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o

include $(TOPDIR)/post/rules.mk diff --git a/post/cpu/ppc4xx/Makefile b/post/cpu/ppc4xx/Makefile index e3f44b7..7b13413 100644 --- a/post/cpu/ppc4xx/Makefile +++ b/post/cpu/ppc4xx/Makefile @@ -20,10 +20,11 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # +include $(TOPDIR)/include/autoconf.mk

LIB = libpostppc4xx.a

-AOBJS = cache_4xx.o -COBJS = cache.o denali_ecc.o ether.o fpu.o spr.o uart.o watchdog.o +AOBJS-$(CONFIG_HAS_POST) += cache_4xx.o +COBJS-$(CONFIG_HAS_POST) += cache.o denali_ecc.o ether.o fpu.o spr.o uart.o watchdog.o

include $(TOPDIR)/post/rules.mk diff --git a/post/drivers/Makefile b/post/drivers/Makefile index cb2f1de..0b6cdf5 100644 --- a/post/drivers/Makefile +++ b/post/drivers/Makefile @@ -20,12 +20,10 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # - - -SUBDIRS = +include $(TOPDIR)/config.mk

LIB = libpostdrivers.a

-COBJS = i2c.o memory.o rtc.o +COBJS-$(CONFIG_HAS_POST) += i2c.o memory.o rtc.o

include $(TOPDIR)/post/rules.mk diff --git a/post/lib_ppc/Makefile b/post/lib_ppc/Makefile index 9f1b329..bd7a232 100644 --- a/post/lib_ppc/Makefile +++ b/post/lib_ppc/Makefile @@ -20,14 +20,13 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # - -SUBDIRS = fpu +include $(TOPDIR)/config.mk

LIB = libpostppc.a

-AOBJS = asm.o -COBJS = cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o -COBJS += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o -COBJS += store.o load.o cr.o b.o multi.o string.o complex.o +AOBJS-$(CONFIG_HAS_POST) += asm.o +COBJS-$(CONFIG_HAS_POST) += cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o +COBJS-$(CONFIG_HAS_POST) += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o +COBJS-$(CONFIG_HAS_POST) += store.o load.o cr.o b.o multi.o string.o complex.o

include $(TOPDIR)/post/rules.mk diff --git a/post/lib_ppc/fpu/Makefile b/post/lib_ppc/fpu/Makefile index 82646c8..db43593 100644 --- a/post/lib_ppc/fpu/Makefile +++ b/post/lib_ppc/fpu/Makefile @@ -20,12 +20,12 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # - +include $(TOPDIR)/config.mk

LIB = libpostppcfpu.a

-COBJS += fpu.o 20001122-1.o 20010114-2.o 20010226-1.o 980619-1.o -COBJS += acc1.o compare-fp-1.o mul-subnormal-single-1.o +COBJS-$(CONFIG_HAS_POST) += fpu.o 20001122-1.o 20010114-2.o 20010226-1.o 980619-1.o +COBJS-$(CONFIG_HAS_POST) += acc1.o compare-fp-1.o mul-subnormal-single-1.o

include $(TOPDIR)/post/rules.mk

diff --git a/post/rules.mk b/post/rules.mk index e2c73c6..94e72be 100644 --- a/post/rules.mk +++ b/post/rules.mk @@ -23,6 +23,8 @@

include $(TOPDIR)/config.mk

+COBJS := $(COBJS-y) +AOBJS := $(AOBJS-y) SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) LIB := $(obj)$(LIB)

-- 1.5.4.2

Wolfgang Denk

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] lwmon5 watchdog: limit trigger rate

From: Yuri Tikhonov yur@emcraft.com

Limit the rate of h/w watch-dog triggering on the LWMON5 board by the CONFIG_WD_MAX_RATE value.

Note that an earlier version of this patch which used microseconds instead of ticks dis not work. The problem was that we used usec2ticks() to convert microseconds into ticks. usec2ticks() uses get_tbclk(), which in turn calls get_sys_info(). It turns out that this function does a lot of prolonged operations (like divisions) which take too much time so we do not trigger the watchdog in time, and it resets the system.

Signed-off-by: Yuri Tikhonov yur@emcraft.com --- board/lwmon5/lwmon5.c | 18 ++++++++++++++++++ include/asm-ppc/global_data.h | 3 +++ include/configs/lwmon5.h | 1 + 3 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index e5fa259..b63fbdc 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -476,6 +476,24 @@ int is_pci_host(struct pci_controller *hose) void hw_watchdog_reset(void) { int val; +#if defined(CONFIG_WD_MAX_RATE) + unsigned long long ct = get_ticks(); + + /* + * Don't allow watch-dog triggering more frequently than + * the predefined value CONFIG_WD_MAX_RATE [ticks]. + */ + if (ct >= gd->wdt_last) { + if ((ct - gd->wdt_last) < CONFIG_WD_MAX_RATE) + return; + } else { + /* Time base counter had been reset */ + if (((unsigned long long)(-1) - gd->wdt_last + ct) < + CONFIG_WD_MAX_RATE) + return; + } + gd->wdt_last = get_ticks(); +#endif

/* * Toggle watchdog output diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index e07092b..4657604 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -155,6 +155,9 @@ typedef struct global_data { #if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5) unsigned long kbd_status; #endif +#if defined(CONFIG_WD_MAX_RATE) + unsigned long long wdt_last; /* trace watch-dog triggering rate */ +#endif void **jt; /* jump table */ } gd_t;

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index ced7ba6..58f078b 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -455,6 +455,7 @@

#define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */ #define CONFIG_WD_PERIOD 40000 /* in usec */ +#define CONFIG_WD_MAX_RATE 66600 /* in ticks */

/* * For booting Linux, the board info and command line data

-- 1.5.4.2

Wolfgang Denk

4:24 p.m.

New subject: [U-Boot-Users] [PATCH] Added watchdog triggering calls in the "mtest" test function.

From: Sergei Poselenov sposelenov@emcraft.com

Signed-off-by: Sergei Poselenov sposelenov@emcraft.com --- common/cmd_mem.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 4262e26..4740664 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -35,6 +35,7 @@ #ifdef CONFIG_HAS_DATAFLASH #include <dataflash.h> #endif +#include <watchdog.h>

#if defined(CONFIG_CMD_MEMORY) \ || defined(CONFIG_CMD_I2C) \ @@ -868,6 +869,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } } start[test_offset] = pattern; + WATCHDOG_RESET();

/* * Check for addr bits stuck low or shorted. @@ -905,6 +907,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) * Fill memory with a known pattern. */ for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { + WATCHDOG_RESET(); start[offset] = pattern; }

@@ -912,6 +915,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) * Check each location and invert it for the second pass. */ for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { + WATCHDOG_RESET(); temp = start[offset]; if (temp != pattern) { printf ("\nFAILURE (read/write) @ 0x%.8lx:" @@ -928,6 +932,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) * Check each location for the inverted pattern and zero it. */ for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { + WATCHDOG_RESET(); anti_pattern = ~pattern; temp = start[offset]; if (temp != anti_pattern) { @@ -954,6 +959,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) pattern, "");

for (addr=start,val=pattern; addr<end; addr++) { + WATCHDOG_RESET(); *addr = val; val += incr; } @@ -961,6 +967,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) puts ("Reading...");

for (addr=start,val=pattern; addr<end; addr++) { + WATCHDOG_RESET(); readback = *addr; if (readback != val) { printf ("\nMem error @ 0x%08X: "

-- 1.5.4.2

Stefan Roese

24 Apr 24 Apr

4:43 p.m.

New subject: [U-Boot-Users] [PATCH] lwmon5 watchdog: limit trigger rate

On Tuesday 22 April 2008, Wolfgang Denk wrote:

...

From: Yuri Tikhonov yur@emcraft.com

Limit the rate of h/w watch-dog triggering on the LWMON5 board by the CONFIG_WD_MAX_RATE value.

Note that an earlier version of this patch which used microseconds instead of ticks dis not work. The problem was that we used usec2ticks() to convert microseconds into ticks. usec2ticks() uses get_tbclk(), which in turn calls get_sys_info(). It turns out that this function does a lot of prolonged operations (like divisions) which take too much time so we do not trigger the watchdog in time, and it resets the system.

Signed-off-by: Yuri Tikhonov yur@emcraft.com

Applied to u-boot-ppc4xx repository. Thanks.

Best regards, Stefan

===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================

Stefan Roese

4:50 p.m.

New subject: [U-Boot-Users] [PATCH] lwmon5: Fix register test logic to match the specific GDC h/w.

On Tuesday 22 April 2008, Wolfgang Denk wrote:

...

From: Yuri Tikhonov yur@pollux.denx.de

Signed-off-by: Dmitry Rakhchev rda@emcraft.com Signed-off-by: Yuri Tikhonov yur@emcraft.com

Already included in current U-Boot.

Best regards, Stefan

Stefan Roese

4:36 p.m.

New subject: [U-Boot-Users] [PATCH] Fix backlight in the lwmon5 POST.

On Tuesday 22 April 2008, Wolfgang Denk wrote:

...

From: Yuri Tikhonov yur@pollux.denx.de

Backlight was switcehd on even when temperature was too low.

Signed-off-by: Dmitry Rakhchev rda@emcraft.com Signed-off-by: Yuri Tikhonov yur@emcraft.com

Already included in current U-Boot.

Best regards, Stefan

Stefan Roese

4:35 p.m.

New subject: [U-Boot-Users] [PATCH] Add support for the lwmon5 board reset via GPIO58.

On Tuesday 22 April 2008, Wolfgang Denk wrote:

...

From: Yuri Tikhonov yur@pollux.denx.de

Signed-off-by: Dmitry Rakhchev rda@emcraft.com Signed-off-by: Yuri Tikhonov yur@emcraft.com

Already included in current U-Boot.

Best regards, Stefan

Stefan Roese

4:34 p.m.

New subject: [U-Boot-Users] [PATCH] Some fixes to dspic, fpga, and gdc post tests for lwmon5.

On Tuesday 22 April 2008, Wolfgang Denk wrote:

...

From: Yuri Tikhonov yur@pollux.denx.de

Signed-off-by: Dmitry Rakhchev rda@emcraft.com Signed-off-by: Yuri Tikhonov yur@emcraft.com

Already included in current U-Boot.

Best regards, Stefan

Stefan Roese

4:33 p.m.

New subject: [U-Boot-Users] [PATCH] The patch adds new POST tests for the Lwmon5 board.

On Tuesday 22 April 2008, Wolfgang Denk wrote:

...

From: Yuri Tikhonov yur@pollux.denx.de

External Watchdog test;

dsPIC tests;

FPGA test;

GDC test;

Sysmon tests.

Signed-off-by: Dmitry Rakhchev rda@emcraft.com Signed-off-by: Yuri Tikhonov yur@emcraft.com

Already included in current U-Boot.

Best regards, Stefan

6221

Age (days ago)

6223

Last active (days ago)

List overview

Download

17 comments

2 participants

tags (0)

participants (2)

Stefan Roese
Wolfgang Denk