Hi Ashish,

Changes in below patch are already part of following patch already in upstream.

https://patchwork.ozlabs.org/patch/806983/

Regards, Sumit

-----Original Message----- From: U-Boot [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Ashish Kumar Sent: Friday, January 05, 2018 5:08 PM To: u-boot@lists.denx.de Cc: Pankit Garg pankit.garg@nxp.com Subject: [U-Boot] [PATCH] armv8: ls1088ardb: Put distro boot functions under CONFIG_SPL_BUILD

Remove distro related stuff from SPL-uboot to save on SPL size.

Signed-off-by: Ashish Kumar Ashish.Kumar@nxp.com Signed-off-by: Pankit Garg pankit.garg@nxp.com

---

Size reduction is approx 5K depends upon https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatch work.ozlabs.org%2Fpatch%2F853615%2F&data=02%7C01%7Csumit.garg%40nx p.com%7C73fa100c2a554dda5df408d55430b3f2%7C686ea1d3bc2b4c6fa92cd99c 5c301635%7C0%7C0%7C636507490531835553&sdata=%2FaSTyJNHM%2BYZUvJf CB9NMjrJn9OU7WBVkrFkx36pYJI%3D&reserved=0 https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatch work.ozlabs.org%2Fpatch%2F854402%2F&data=02%7C01%7Csumit.garg%40nx p.com%7C73fa100c2a554dda5df408d55430b3f2%7C686ea1d3bc2b4c6fa92cd99c 5c301635%7C0%7C0%7C636507490531835553&sdata=k8F7Yezv%2F2GA5DfcIAx T%2FcztGNSqZDl9YsNtHhGBqdk%3D&reserved=0

include/configs/ls1088ardb.h | 42 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 41 insertions(+), 1 deletion(-)

diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index ad01a99..3661065 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -285,6 +285,8 @@ #endif

#undef CONFIG_EXTRA_ENV_SETTINGS

+#ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "BOARD=ls1088ardb\0" \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ @@ -357,6 +359,43 @@ "$kernelhdr_addr_sd $kernelhdr_size_sd " \ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$BOARD\0" +#else +#if defined(CONFIG_QSPI_BOOT) +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \

• "hwconfig=fsl_ddr:bank_intlv=auto\0" \
• "loadaddr=0x90100000\0" \
• "kernel_addr=0x100000\0" \
• "ramdisk_addr=0x800000\0" \
• "ramdisk_size=0x2000000\0" \
• "fdt_high=0xa0000000\0" \
• "initrd_high=0xffffffffffffffff\0" \
• "kernel_start=0x1000000\0" \
• "kernel_load=0xa0000000\0" \
• "kernel_size=0x2800000\0" \
• "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
• "sf read 0x80100000 0xE00000 0x100000;" \
• "fsl_mc start mc 0x80000000 0x80100000\0" \
• "mcmemsize=0x70000000 \0"

+#elif defined(CONFIG_SD_BOOT) +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \

• "hwconfig=fsl_ddr:bank_intlv=auto\0" \
• "loadaddr=0x90100000\0" \
• "kernel_addr=0x800\0" \
• "ramdisk_addr=0x800000\0" \
• "ramdisk_size=0x2000000\0" \
• "fdt_high=0xa0000000\0" \
• "initrd_high=0xffffffffffffffff\0" \
• "kernel_start=0x8000\0" \
• "kernel_load=0xa0000000\0" \
• "kernel_size=0x14000\0" \
• "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
• "mmc read 0x80100000 0x7000 0x800;" \
• "fsl_mc start mc 0x80000000 0x80100000\0" \
• "mcmemsize=0x70000000 \0"

+#endif +#endif

#undef CONFIG_BOOTCOMMAND #if defined(CONFIG_QSPI_BOOT) @@ -414,14 +453,15 @@ #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #endif

+#ifndef CONFIG_SPL_BUILD #undef CONFIG_CMDLINE_EDITING #include <config_distro_defaults.h>

#define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(SCSI, scsi, 0) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> +#endif

#include <asm/fsl_secure_boot.h>

-- 2.7.4

---

U-Boot mailing list U-Boot@lists.denx.de https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists. denx.de%2Flistinfo%2Fu- boot&data=02%7C01%7Csumit.garg%40nxp.com%7C73fa100c2a554dda5df408d 55430b3f2%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63650749053 1835553&sdata=J7kUe5IXg8MCzzFgVEiWUpkhg1LjFc0iIPr7S080Eeo%3D&reserv ed=0