[U-Boot] [PATCH 2/2 v2] Remove legacy NAND and disk on chip references from boards.
Signed-off-by: Scott Wood scottwood@freescale.com --- Fixed some board breakages found by the overnight MAKEALL.
In particular, removed doc_probe() invocations (some of which weren't ifdeffed) and removed some CONFIG_CMD_NANDs that got left in on a few boards which were legacy NAND.
board/delta/nand.c | 4 -- board/esd/common/auto_update.c | 50 ------------------- board/g2000/g2000.c | 15 ------ board/netphone/netphone.c | 16 ------ board/netta/netta.c | 15 ------ board/netta2/netta2.c | 16 ------ board/netvia/netvia.c | 15 ------ board/omap2420h4/omap2420h4.c | 23 --------- board/samsung/smdk6400/smdk6400.c | 11 ---- board/sixnet/sixnet.c | 5 -- board/stxxtc/stxxtc.c | 16 ------ board/zylonite/nand.c | 4 -- include/configs/BMW.h | 4 -- include/configs/CATcenter.h | 8 --- include/configs/CPU86.h | 10 ---- include/configs/CPU87.h | 4 -- include/configs/G2000.h | 20 ------- include/configs/GEN860T.h | 17 ------ include/configs/MIP405.h | 10 ---- include/configs/NETPHONE.h | 86 -------------------------------- include/configs/NETTA.h | 99 ------------------------------------- include/configs/NETTA2.h | 86 -------------------------------- include/configs/NETVIA.h | 74 --------------------------- include/configs/PCIPPC2.h | 12 ----- include/configs/PCIPPC6.h | 12 ----- include/configs/PIP405.h | 4 -- include/configs/PM520.h | 19 ------- include/configs/PM826.h | 14 ----- include/configs/PM828.h | 13 ----- include/configs/PPChameleonEVB.h | 26 ---------- include/configs/RBC823.h | 9 --- include/configs/SXNI855T.h | 67 ------------------------- include/configs/TQM85xx.h | 2 - include/configs/VCMA9.h | 38 -------------- include/configs/at91rm9200dk.h | 30 ----------- include/configs/csb637.h | 32 ------------ include/configs/delta.h | 9 --- include/configs/m501sk.h | 5 -- include/configs/omap2420h4.h | 36 ------------- include/configs/sbc2410x.h | 23 --------- include/configs/stxxtc.h | 82 ------------------------------ include/configs/svm_sc8xx.h | 4 -- include/configs/zylonite.h | 8 --- 43 files changed, 0 insertions(+), 1053 deletions(-)
diff --git a/board/delta/nand.c b/board/delta/nand.c index aff7c54..e87d502 100644 --- a/board/delta/nand.c +++ b/board/delta/nand.c @@ -23,7 +23,6 @@ #include <common.h>
#if defined(CONFIG_CMD_NAND) -#if !defined(CONFIG_NAND_LEGACY)
#include <nand.h> #include <asm/arch/pxa-regs.h> @@ -550,7 +549,4 @@ int board_nand_init(struct nand_chip *nand) return 0; }
-#else - #error "U-Boot legacy NAND support not available for Monahans DFC." -#endif #endif diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 33aeb46..c4a49e2 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -27,9 +27,6 @@ #include <command.h> #include <image.h> #include <asm/byteorder.h> -#if defined(CONFIG_NAND_LEGACY) -#include <linux/mtd/nand_legacy.h> -#endif #include <fat.h> #include <part.h>
@@ -58,20 +55,6 @@ extern int flash_sect_erase(ulong, ulong); extern int flash_sect_protect (int, ulong, ulong); extern int flash_write (char *, ulong, ulong);
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) -/* references to names in cmd_nand.c */ -#define NANDRW_READ 0x01 -#define NANDRW_WRITE 0x00 -#define NANDRW_JFFS2 0x02 -#define NANDRW_JFFS2_SKIP 0x04 -extern struct nand_chip nand_dev_desc[]; -extern int nand_legacy_rw(struct nand_chip* nand, int cmd, - size_t start, size_t len, - size_t * retlen, u_char * buf); -extern int nand_legacy_erase(struct nand_chip* nand, size_t ofs, - size_t len, int clean); -#endif - extern block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
int au_check_cksum_valid(int i, long nbytes) @@ -158,9 +141,6 @@ int au_do_update(int i, long sz) int off, rc; uint nbytes; int k; -#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) - int total; -#endif
hdr = (image_header_t *)LOAD_ADDR; #if defined(CONFIG_FIT) @@ -240,15 +220,6 @@ int au_do_update(int i, long sz) au_image[i].name); debug ("flash_sect_erase(%lx, %lx);\n", start, end); flash_sect_erase (start, end); - } else { -#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) - printf ("Updating NAND FLASH with image %s\n", - au_image[i].name); - debug ("nand_legacy_erase(%lx, %lx);\n", start, end); - rc = nand_legacy_erase (nand_dev_desc, start, - end - start + 1, 0); - debug ("nand_legacy_erase returned %x\n", rc); -#endif }
udelay(10000); @@ -273,18 +244,7 @@ int au_do_update(int i, long sz) rc = flash_write ((char *)addr, start, (nbytes + 1) & ~1); } else { -#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) - debug ("nand_legacy_rw(%p, %lx, %x)\n", - addr, start, nbytes); - rc = nand_legacy_rw (nand_dev_desc, - NANDRW_WRITE | NANDRW_JFFS2, - start, nbytes, (size_t *)&total, - (uchar *)addr); - debug ("nand_legacy_rw: ret=%x total=%d nbytes=%d\n", - rc, total, nbytes); -#else rc = -1; -#endif } if (rc != 0) { printf ("Flashing failed due to error %d\n", rc); @@ -297,16 +257,6 @@ int au_do_update(int i, long sz) if (au_image[i].type != AU_NAND) { rc = crc32 (0, (uchar *)(start + off), image_get_data_size (hdr)); - } else { -#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) - rc = nand_legacy_rw (nand_dev_desc, - NANDRW_READ | NANDRW_JFFS2 | - NANDRW_JFFS2_SKIP, - start, nbytes, (size_t *)&total, - (uchar *)addr); - rc = crc32 (0, (uchar *)(addr + off), - image_get_data_size (hdr)); -#endif } if (rc != image_get_dcrc (hdr)) { printf ("Image %s Bad Data Checksum After COPY\n", diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c index 218f1be..f6f4719 100644 --- a/board/g2000/g2000.c +++ b/board/g2000/g2000.c @@ -148,21 +148,6 @@ phys_size_t initdram (int board_type) return ret; }
- -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CONFIG_SYS_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - #if 0 /* test-only !!! */ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { diff --git a/board/netphone/netphone.c b/board/netphone/netphone.c index 53d3172..ce5f051 100644 --- a/board/netphone/netphone.c +++ b/board/netphone/netphone.c @@ -597,22 +597,6 @@ int board_early_init_f(void) return 0; }
-#if defined(CONFIG_CMD_NAND) - -#include <linux/mtd/nand_legacy.h> - -extern ulong nand_probe(ulong physadr); -extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - unsigned long totlen; - - totlen = nand_probe(CONFIG_SYS_NAND_BASE); - printf ("%4lu MB\n", totlen >> 20); -} -#endif - #ifdef CONFIG_HW_WATCHDOG
void hw_watchdog_reset(void) diff --git a/board/netta/netta.c b/board/netta/netta.c index 02fd94c..38c9d89 100644 --- a/board/netta/netta.c +++ b/board/netta/netta.c @@ -555,21 +555,6 @@ int board_early_init_f(void) return 0; }
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) - -#include <linux/mtd/nand_legacy.h> - -extern ulong nand_probe(ulong physadr); -extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - unsigned long totlen = nand_probe(CONFIG_SYS_NAND_BASE); - - printf ("%4lu MB\n", totlen >> 20); -} -#endif - #if defined(CONFIG_CMD_PCMCIA)
int pcmcia_init(void) diff --git a/board/netta2/netta2.c b/board/netta2/netta2.c index 2ce33cf..3b0191d 100644 --- a/board/netta2/netta2.c +++ b/board/netta2/netta2.c @@ -595,22 +595,6 @@ int board_early_init_f(void) return 0; }
-#if defined(CONFIG_CMD_NAND) - -#include <linux/mtd/nand_legacy.h> - -extern ulong nand_probe(ulong physadr); -extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - unsigned long totlen; - - totlen = nand_probe(CONFIG_SYS_NAND_BASE); - printf ("%4lu MB\n", totlen >> 20); -} -#endif - #ifdef CONFIG_HW_WATCHDOG
void hw_watchdog_reset(void) diff --git a/board/netvia/netvia.c b/board/netvia/netvia.c index 0b032c4..5606996 100644 --- a/board/netvia/netvia.c +++ b/board/netvia/netvia.c @@ -415,18 +415,3 @@ int board_early_init_f(void)
return 0; } - -#if defined(CONFIG_CMD_NAND) - -#include <linux/mtd/nand_legacy.h> - -extern ulong nand_probe(ulong physadr); -extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - unsigned long totlen = nand_probe(CONFIG_SYS_NAND_BASE); - - printf ("%4lu MB\n", totlen >> 20); -} -#endif diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c index 0fe9380..8d18239 100644 --- a/board/omap2420h4/omap2420h4.c +++ b/board/omap2420h4/omap2420h4.c @@ -31,10 +31,6 @@ #include <asm/arch/mem.h> #include <i2c.h> #include <asm/mach-types.h> -#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; -#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -846,22 +842,3 @@ void update_mux(u32 btype,u32 mtype) } } } - -#if defined(CONFIG_CMD_NAND) -void nand_init(void) -{ - extern flash_info_t flash_info[]; - - nand_probe(CONFIG_SYS_NAND_ADDR); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } - -#ifdef CONFIG_SYS_JFFS2_MEM_NAND - flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].flash_id = nand_dev_desc[0].id; - flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].size = 1024*1024*2; /* only read kernel single meg partition */ - flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].sector_count = 1024; /* 1024 blocks in 16meg chip (use less for raw/copied partition) */ - flash_info[CONFIG_SYS_JFFS2_FIRST_BANK].start[0] = 0x80200000; /* ?, ram for now, open question, copy to RAM or adapt for NAND */ -#endif -} -#endif diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c index bd2e45a..52cd174 100644 --- a/board/samsung/smdk6400/smdk6400.c +++ b/board/samsung/smdk6400/smdk6400.c @@ -107,17 +107,6 @@ ulong virt_to_phy_smdk6400(ulong addr) } #endif
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_SYS_NAND_LEGACY) -#include <linux/mtd/nand.h> -extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; -void nand_init(void) -{ - nand_probe(CONFIG_SYS_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) - print_size(nand_dev_desc[0].totlen, "\n"); -} -#endif - ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t *info) { if (banknum == 0) { /* non-CFI boot flash */ diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c index 6e39b01..edb5d13 100644 --- a/board/sixnet/sixnet.c +++ b/board/sixnet/sixnet.c @@ -33,11 +33,6 @@ # include <status_led.h> #endif
-#if defined(CONFIG_CMD_NAND) -#include <linux/mtd/nand_legacy.h> -extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; -#endif - DECLARE_GLOBAL_DATA_PTR;
#define ORMASK(size) ((-size) & OR_AM_MSK) diff --git a/board/stxxtc/stxxtc.c b/board/stxxtc/stxxtc.c index a1a36c4..717dbe2 100644 --- a/board/stxxtc/stxxtc.c +++ b/board/stxxtc/stxxtc.c @@ -574,22 +574,6 @@ int board_early_init_f(void) return 0; }
-#if defined(CONFIG_CMD_NAND) - -#include <linux/mtd/nand_legacy.h> - -extern ulong nand_probe(ulong physadr); -extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - unsigned long totlen; - - totlen = nand_probe(CONFIG_SYS_NAND_BASE); - printf ("%4lu MB\n", totlen >> 20); -} -#endif - #ifdef CONFIG_HW_WATCHDOG
void hw_watchdog_reset(void) diff --git a/board/zylonite/nand.c b/board/zylonite/nand.c index 899445e..bec54cb 100644 --- a/board/zylonite/nand.c +++ b/board/zylonite/nand.c @@ -23,7 +23,6 @@ #include <common.h>
#if defined(CONFIG_CMD_NAND) -#ifdef CONFIG_NEW_NAND_CODE
#include <nand.h> #include <asm/arch/pxa-regs.h> @@ -554,7 +553,4 @@ int board_nand_init(struct nand_chip *nand) return 0; }
-#else - #error "U-Boot legacy NAND support not available for Monahans DFC." -#endif #endif diff --git a/include/configs/BMW.h b/include/configs/BMW.h index 24ffb00..98f6396 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -81,13 +81,9 @@ #include <config_cmd_default.h>
#define CONFIG_CMD_DATE -#define CONFIG_CMD_DOC #define CONFIG_CMD_ELF
-/* CONFIG_CMD_DOC required legacy NAND support */ -#define CONFIG_NAND_LEGACY - #if 0 #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index 39f41e6..229a513 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -209,16 +209,8 @@
/* For CATcenter there is only NAND on the module */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 #define NAND_NO_RB
-#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - #define CONFIG_SYS_NAND0_CE (0x80000000 >> 1) /* our CE is GPIO1 */ #define CONFIG_SYS_NAND0_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CONFIG_SYS_NAND0_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index cf21fd9..6d76d9f 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -146,15 +146,6 @@ #undef CONFIG_WATCHDOG /* watchdog disabled */
/*----------------------------------------------------------------------- - * Disk-On-Chip configuration - */ - -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CONFIG_SYS_DOC_SUPPORT_2000 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM - -/*----------------------------------------------------------------------- * Miscellaneous configuration options */
@@ -179,7 +170,6 @@ #define CONFIG_CMD_BEDBUG #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_DOC #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C #define CONFIG_CMD_NFS diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index 489378a..83b010c 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -182,7 +182,6 @@
#define CONFIG_CMD_BEDBUG #define CONFIG_CMD_DATE -#define CONFIG_CMD_DOC #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C
@@ -190,9 +189,6 @@ #define CONFIG_CMD_PCI #endif
- -#define CONFIG_NAND_LEGACY - /* * Miscellaneous configurable options */ diff --git a/include/configs/G2000.h b/include/configs/G2000.h index bf9fd82..6819c3e 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -196,32 +196,12 @@ *----------------------------------------------------------------------- */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1
#define CONFIG_SYS_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ #define CONFIG_SYS_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CONFIG_SYS_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ #define CONFIG_SYS_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */
-#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND_CE);} while(0) -#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND_CE);} while(0) -#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND_ALE);} while(0) -#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND_ALE);} while(0) -#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND_CLE);} while(0) -#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND_CLE);} while(0) -#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CONFIG_SYS_NAND_RDY)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) #endif
/*----------------------------------------------------------------------- diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index 8f18ab2..12f879a 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -244,10 +244,6 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_BEDBUG
-#if !defined(CONFIG_SC) - #define CONFIG_CMD_DOC -#endif - #ifdef CONFIG_POST #define CONFIG_CMD_DIAG #endif @@ -279,9 +275,6 @@ #define CONFIG_FPGA_VIRTEX2 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
- -#define CONFIG_NAND_LEGACY - /* * Verbose help from command monitor. */ @@ -738,16 +731,6 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */
/* - * Disk On Chip (millenium) configuration - */ -#if !defined(CONFIG_SC) -#define CONFIG_SYS_MAX_DOC_DEVICE 1 -#undef CONFIG_SYS_DOC_SUPPORT_2000 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM -#undef CONFIG_SYS_DOC_PASSIVE_PROBE -#endif - -/* * FEC interrupt assignment */ #define FEC_INTERRUPT SIU_LEVEL1 diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 8315cfe..264e0e7 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -84,12 +84,9 @@
#if !defined(CONFIG_MIP405T) #define CONFIG_CMD_USB - #define CONFIG_CMD_DOC #endif
-#define CONFIG_NAND_LEGACY - #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /************************************************************** @@ -384,13 +381,6 @@ #define CONFIG_ISO_PARTITION /* Experimental */
/************************************************************ - * Disk-On-Chip configuration - ************************************************************/ -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ -#define CONFIG_SYS_DOC_SHORT_TIMEOUT -#define CONFIG_SYS_DOC_SUPPORT_2000 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM -/************************************************************ * Keyboard support ************************************************************/ #undef CONFIG_ISA_KEYBOARD diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index 796938a..8a197ad 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -497,95 +497,9 @@ #define DSP_BASE 0xF1000000 #define NAND_BASE 0xF1010000
-/****************************************************************/ - -/* NAND */ -#define CONFIG_NAND_LEGACY -#define CONFIG_SYS_NAND_BASE NAND_BASE -#define CONFIG_MTD_NAND_ECC_JFFS2 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_MTD_NAND_UNSAFE - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#define SECTORSIZE 512 -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -/* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */ -#define NAND_DISABLE_CE(nand) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |= (1 << (31 - 20)); \ - } while(0) - -#define NAND_ENABLE_CE(nand) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \ - } while(0) - -#define NAND_CTL_CLRALE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \ - } while(0) - -#define NAND_CTL_SETALE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |= (1 << (31 - 17)); \ - } while(0) - -#define NAND_CTL_CLRCLE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \ - } while(0) - -#define NAND_CTL_SETCLE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |= (1 << (31 - 18)); \ - } while(0) - -#if CONFIG_NETPHONE_VERSION == 1 -#define NAND_WAIT_READY(nand) \ - do { \ - int _tries = 0; \ - while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \ - if (++_tries > 100000) \ - break; \ - } while (0) -#elif CONFIG_NETPHONE_VERSION == 2 -#define NAND_WAIT_READY(nand) \ - do { \ - int _tries = 0; \ - while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 15))) == 0) \ - if (++_tries > 100000) \ - break; \ - } while (0) -#endif - -#define WRITE_NAND_COMMAND(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define WRITE_NAND_ADDRESS(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define WRITE_NAND(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define READ_NAND(adr) \ - ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr))) - /*****************************************************************************/
#define CONFIG_SYS_DIRECT_FLASH_TFTP -#define CONFIG_SYS_DIRECT_NAND_TFTP
/*****************************************************************************/
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 724e807..dda6179 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -616,105 +616,6 @@ #define ER_BASE 0xF1020000 #define DUMMY_BASE 0xF1FF0000
-/****************************************************************/ - -/* NAND */ -#define CONFIG_NAND_LEGACY -#define CONFIG_SYS_NAND_BASE NAND_BASE -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_MTD_NAND_UNSAFE - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -/* #define NAND_NO_RB */ - -#define SECTORSIZE 512 -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -/* ALE = PD3, CLE = PD4, CE = PD5, F_RY_BY = PC13 */ -#define NAND_DISABLE_CE(nand) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |= (1 << (15 - 5)); \ - } while(0) - -#define NAND_ENABLE_CE(nand) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 5)); \ - } while(0) - -#define NAND_CTL_CLRALE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 3)); \ - } while(0) - -#define NAND_CTL_SETALE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |= (1 << (15 - 3)); \ - } while(0) - -#define NAND_CTL_CLRCLE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 4)); \ - } while(0) - -#define NAND_CTL_SETCLE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |= (1 << (15 - 4)); \ - } while(0) - -#ifndef NAND_NO_RB -#define NAND_WAIT_READY(nand) \ - do { \ - while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 13))) == 0) { \ - WATCHDOG_RESET(); \ - } \ - } while (0) -#else -#define NAND_WAIT_READY(nand) udelay(12) -#endif - -#define WRITE_NAND_COMMAND(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define WRITE_NAND_ADDRESS(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define WRITE_NAND(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define READ_NAND(adr) \ - ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr))) - -#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nand0" -#define CONFIG_JFFS2_PART_SIZE 0x00100000 -#define CONFIG_JFFS2_PART_OFFSET 0x00200000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nand0=netta-nand" -#define MTDPARTS_DEFAULT "mtdparts=netta-nand:1m@2m(jffs2)" -*/ - /*****************************************************************************/
#define CONFIG_SYS_DIRECT_FLASH_TFTP diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index a14b2dd..167285e 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -498,95 +498,9 @@ #define DSP_BASE 0xF1000000 #define NAND_BASE 0xF1010000
-/****************************************************************/ - -/* NAND */ -#define CONFIG_NAND_LEGACY -#define CONFIG_SYS_NAND_BASE NAND_BASE -#define CONFIG_MTD_NAND_ECC_JFFS2 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_MTD_NAND_UNSAFE - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#define SECTORSIZE 512 -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -/* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */ -#define NAND_DISABLE_CE(nand) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |= (1 << (31 - 20)); \ - } while(0) - -#define NAND_ENABLE_CE(nand) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \ - } while(0) - -#define NAND_CTL_CLRALE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \ - } while(0) - -#define NAND_CTL_SETALE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |= (1 << (31 - 17)); \ - } while(0) - -#define NAND_CTL_CLRCLE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \ - } while(0) - -#define NAND_CTL_SETCLE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |= (1 << (31 - 18)); \ - } while(0) - -#if CONFIG_NETTA2_VERSION == 1 -#define NAND_WAIT_READY(nand) \ - do { \ - int _tries = 0; \ - while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \ - if (++_tries > 100000) \ - break; \ - } while (0) -#elif CONFIG_NETTA2_VERSION == 2 -#define NAND_WAIT_READY(nand) \ - do { \ - int _tries = 0; \ - while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 15))) == 0) \ - if (++_tries > 100000) \ - break; \ - } while (0) -#endif - -#define WRITE_NAND_COMMAND(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define WRITE_NAND_ADDRESS(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define WRITE_NAND(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define READ_NAND(adr) \ - ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr))) - /*****************************************************************************/
#define CONFIG_SYS_DIRECT_FLASH_TFTP -#define CONFIG_SYS_DIRECT_NAND_TFTP
/*****************************************************************************/
diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index f97bdcb..b9cf621 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -393,80 +393,6 @@
#endif
-/*****************************************************************************/ - -#define CONFIG_NAND_LEGACY - -#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 - -/* NAND */ -#define CONFIG_SYS_NAND_BASE NAND_BASE -#define CONFIG_MTD_NAND_ECC_JFFS2 - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#define SECTORSIZE 512 -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -#define NAND_DISABLE_CE(nand) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |= 0x0040; \ - } while(0) - -#define NAND_ENABLE_CE(nand) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~0x0040; \ - } while(0) - -#define NAND_CTL_CLRALE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~0x0100; \ - } while(0) - -#define NAND_CTL_SETALE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |= 0x0100; \ - } while(0) - -#define NAND_CTL_CLRCLE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~0x0080; \ - } while(0) - -#define NAND_CTL_SETCLE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |= 0x0080; \ - } while(0) - -#define NAND_WAIT_READY(nand) \ - do { \ - while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & 0x100) == 0) \ - ; \ - } while (0) - -#define WRITE_NAND_COMMAND(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define WRITE_NAND_ADDRESS(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define WRITE_NAND(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define READ_NAND(adr) \ - ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr))) - -#endif
/*****************************************************************************/
diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h index 5951d00..99a8c4a 100644 --- a/include/configs/PCIPPC2.h +++ b/include/configs/PCIPPC2.h @@ -75,7 +75,6 @@ #define CONFIG_CMD_BSP #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_DOC #define CONFIG_CMD_ELF #define CONFIG_CMD_NFS #define CONFIG_CMD_PCI @@ -84,8 +83,6 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
-#define CONFIG_NAND_LEGACY - /* * Miscellaneous configurable options */ @@ -251,15 +248,6 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */
/*----------------------------------------------------------------------- - * Disk-On-Chip configuration - */ - -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CONFIG_SYS_DOC_SUPPORT_2000 -#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM - -/*----------------------------------------------------------------------- RTC m48t59 */ #define CONFIG_RTC_MK48T59 diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index a683a8f..66e6d24 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -75,7 +75,6 @@ #define CONFIG_CMD_BSP #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_DOC #define CONFIG_CMD_ELF #define CONFIG_CMD_NFS #define CONFIG_CMD_PCI @@ -86,8 +85,6 @@ #define CONFIG_PCI 1 #define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
-#define CONFIG_NAND_LEGACY - /* * Miscellaneous configurable options */ @@ -253,15 +250,6 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */
/*----------------------------------------------------------------------- - * Disk-On-Chip configuration - */ - -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CONFIG_SYS_DOC_SUPPORT_2000 -#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM - -/*----------------------------------------------------------------------- RTC m48t59 */ #define CONFIG_RTC_MK48T59 diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index e214d70..e15ed4a 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -71,14 +71,10 @@ #define CONFIG_CMD_USB #define CONFIG_CMD_MII #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_DOC #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #define CONFIG_CMD_BSP
- -#define CONFIG_NAND_LEGACY - #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /************************************************************** diff --git a/include/configs/PM520.h b/include/configs/PM520.h index ff73ef9..f9687d2 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -86,12 +86,6 @@ #define CONFIG_USB_STORAGE #endif
-#if !defined(CONFIG_BOOT_ROM) -/* DoC requires legacy NAND for now */ -#define CONFIG_NAND_LEGACY -#endif - - /* * BOOTP options */ @@ -117,10 +111,6 @@ #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB
-#if !defined(CONFIG_BOOT_ROM) -#define CONFIG_CMD_DOC -#endif - #if defined(CONFIG_MPC5200) #define CONFIG_CMD_PCI #endif @@ -186,15 +176,6 @@ #define CONFIG_RTC_PCF8563 #define CONFIG_SYS_I2C_RTC_ADDR 0x51
-/* - * Disk-On-Chip configuration - */ - -#define CONFIG_SYS_DOC_SHORT_TIMEOUT -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CONFIG_SYS_DOC_SUPPORT_2000 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM #define CONFIG_SYS_DOC_BASE 0xE0000000 #define CONFIG_SYS_DOC_SIZE 0x00100000
diff --git a/include/configs/PM826.h b/include/configs/PM826.h index b58f529..636bd26 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -169,7 +169,6 @@ #define CONFIG_CMD_BEDBUG #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_DOC #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C #define CONFIG_CMD_NFS @@ -179,19 +178,6 @@ #define CONFIG_CMD_PCI #endif
- -#define CONFIG_NAND_LEGACY - -/* - * Disk-On-Chip configuration - */ - -#define CONFIG_SYS_DOC_SHORT_TIMEOUT -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CONFIG_SYS_DOC_SUPPORT_2000 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM - /* * Miscellaneous configurable options */ diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 96c86f7..9d620af 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -169,7 +169,6 @@ #define CONFIG_CMD_BEDBUG #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_DOC #define CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C #define CONFIG_CMD_NFS @@ -179,18 +178,6 @@ #define CONFIG_CMD_PCI #endif
- -/* - * Disk-On-Chip configuration - */ -#define CONFIG_NAND_LEGACY - -#define CONFIG_SYS_DOC_SHORT_TIMEOUT -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CONFIG_SYS_DOC_SUPPORT_2000 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM - /* * Miscellaneous configurable options */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 16baf8c..9e54bf8 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -309,32 +309,6 @@ } \ } while(0)
-#if 0 -#define SECTORSIZE 512 -#define NAND_NO_RB - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -#ifdef NAND_NO_RB -/* constant delay (see also tR in the datasheet) */ -#define NAND_WAIT_READY(nand) do { \ - udelay(12); \ -} while (0) -#else -/* use the R/B pin */ -/* TBD */ -#endif - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) -#endif /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index f36244d..00ac6cf 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -114,7 +114,6 @@ #define CONFIG_CMD_CDP #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG -#define CONFIG_CMD_DOC #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF #define CONFIG_CMD_FAT @@ -329,14 +328,6 @@
#endif
-/************************************************************ - * Disk-On-Chip configuration - ************************************************************/ -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ -#define CONFIG_SYS_DOC_SHORT_TIMEOUT -#define CONFIG_SYS_DOC_SUPPORT_2000 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM - /*----------------------------------------------------------------------- * *----------------------------------------------------------------------- diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index cac04b4..8ee8cbf 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -163,75 +163,8 @@
#define CONFIG_CMD_EEPROM #define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NAND #define CONFIG_CMD_DATE
- -#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition */ -#undef CONFIG_CMD_MTDPARTS - -/* -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0x00780000 -#define CONFIG_JFFS2_PART_OFFSET 0x00080000 -*/ - -#define CONFIG_JFFS2_DEV "nand0" -#define CONFIG_JFFS2_PART_SIZE 0x00200000 -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=sixnet-0,nand0=sixnet-nand" -#define MTDPARTS_DEFAULT "mtdparts=sixnet-0:7680k@512k();sixnet-nand:2m(jffs2-nand)" -*/ - -/* NAND flash support */ -#define CONFIG_NAND_LEGACY -#define CONFIG_MTD_NAND_ECC_JFFS2 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -/* DFBUSY is available on Port C, bit 12; 0 if busy */ -#define NAND_WAIT_READY(nand) \ - while (!(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & 0x0008)); -#define WRITE_NAND_COMMAND(d, adr) WRITE_NAND((d), (adr)) -#define WRITE_NAND_ADDRESS(d, adr) WRITE_NAND((d), (adr)) -#define WRITE_NAND(d, adr) \ - do { (*(volatile uint8_t *)(adr) = (uint8_t)(d)); } while (0) -#define READ_NAND(adr) (*(volatile uint8_t *)(adr)) -#define CLE_LO 0x01 /* 0 selects CLE mode (CLE high) */ -#define ALE_LO 0x02 /* 0 selects ALE mode (ALE high) */ -#define CE_LO 0x04 /* 1 selects chip (CE low) */ -#define nand_setcr(cr, val) do {*(volatile uint8_t*)(cr) = (val);} while (0) -#define NAND_DISABLE_CE(nand) \ - nand_setcr((nand)->IO_ADDR + 1, ALE_LO | CLE_LO) -#define NAND_ENABLE_CE(nand) \ - nand_setcr((nand)->IO_ADDR + 1, CE_LO | ALE_LO | CLE_LO) -#define NAND_CTL_CLRALE(nandptr) \ - nand_setcr((nandptr) + 1, CE_LO | ALE_LO | CLE_LO) -#define NAND_CTL_SETALE(nandptr) \ - nand_setcr((nandptr) + 1, CE_LO | CLE_LO) -#define NAND_CTL_CLRCLE(nandptr) \ - nand_setcr((nandptr) + 1, CE_LO | ALE_LO | CLE_LO) -#define NAND_CTL_SETCLE(nandptr) \ - nand_setcr((nandptr) + 1, CE_LO | ALE_LO) - /* * Miscellaneous configurable options */ diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 6f13c63..d44fb07 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -351,8 +351,6 @@ /* NAND FLASH */ #ifdef CONFIG_NAND
-#undef CONFIG_NAND_LEGACY - #define CONFIG_NAND_FSL_UPM 1
#define CONFIG_MTD_NAND_ECC_JFFS2 1 /* use JFFS2 ECC */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index de3092d..0480913 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -246,42 +246,4 @@
#define MULTI_PURPOSE_SOCKET_ADDR 0x08000000
-/*----------------------------------------------------------------------- - * NAND flash settings - */ -#if defined(CONFIG_CMD_NAND) - -#define CONFIG_NAND_LEGACY -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -#define NAND_WAIT_READY(nand) NF_WaitRB() - -#define NAND_DISABLE_CE(nand) NF_SetCE(NFCE_HIGH) -#define NAND_ENABLE_CE(nand) NF_SetCE(NFCE_LOW) - - -#define WRITE_NAND_COMMAND(d, adr) NF_Cmd(d) -#define WRITE_NAND_COMMANDW(d, adr) NF_CmdW(d) -#define WRITE_NAND_ADDRESS(d, adr) NF_Addr(d) -#define WRITE_NAND(d, adr) NF_Write(d) -#define READ_NAND(adr) NF_Read() -/* the following functions are NOP's because S3C24X0 handles this in hardware */ -#define NAND_CTL_CLRALE(nandptr) -#define NAND_CTL_SETALE(nandptr) -#define NAND_CTL_CLRCLE(nandptr) -#define NAND_CTL_SETCLE(nandptr) - -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 -#define CONFIG_MTD_NAND_ECC_JFFS2 1 - -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 56128c1..2017b66 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -117,38 +117,8 @@
#define CONFIG_CMD_DHCP #define CONFIG_CMD_MII -#define CONFIG_CMD_NAND - -#define CONFIG_NAND_LEGACY - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ -#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ -#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) -#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) - -#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) -/* the following are NOP's in our implementation */ -#define NAND_CTL_CLRALE(nandptr) -#define NAND_CTL_SETALE(nandptr) -#define NAND_CTL_CLRCLE(nandptr) -#define NAND_CTL_SETCLE(nandptr)
#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 diff --git a/include/configs/csb637.h b/include/configs/csb637.h index e1cdc7f..7a57696 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -121,38 +121,6 @@ #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_PING
-#ifdef NAND_SUPPORT_HAS_BEEN_FIXED /* NAND support is broken / unimplemented */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ -#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ - -#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ -#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) -#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) - -#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) -/* the following are NOP's in our implementation */ -#define NAND_CTL_CLRALE(nandptr) -#define NAND_CTL_SETALE(nandptr) -#define NAND_CTL_CLRCLE(nandptr) -#define NAND_CTL_SETCLE(nandptr) - -#endif /* NAND_SUPPORT_HAS_BEEN_FIXED */
#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 diff --git a/include/configs/delta.h b/include/configs/delta.h index e7186e8..9c46c5b 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -220,8 +220,6 @@ /* * NAND Flash */ -#undef CONFIG_NAND_LEGACY - #define CONFIG_SYS_NAND0_BASE 0x0 /* 0x43100040 */ /* 0x10000000 */ #undef CONFIG_SYS_NAND1_BASE
@@ -255,13 +253,6 @@ #define CONFIG_MTD_DEBUG #define CONFIG_MTD_DEBUG_VERBOSE 1
-#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - #define CONFIG_SYS_NO_FLASH 1
#define CONFIG_ENV_IS_IN_NAND 1 diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h index 1e7d90e..32a8194 100644 --- a/include/configs/m501sk.h +++ b/include/configs/m501sk.h @@ -162,11 +162,6 @@ #define CONFIG_SYS_PROMPT_HUSH_PS2 ">>"
#define CONFIG_SYS_MAX_NAND_DEVICE 0 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3
#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 1803b13..9c18842 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -147,42 +147,6 @@ #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_BOOTPATH
- -/* - * Board NAND Info. - */ -#define CONFIG_NAND_LEGACY -#define CONFIG_SYS_NAND_ADDR 0x04000000 /* physical address to access nand at CS0*/ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)0x6800A07C = d;} while(0) -#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)0x6800A080 = d;} while(0) -#define WRITE_NAND(d, adr) do {*(volatile u16 *)0x6800A084 = d;} while(0) -#define READ_NAND(adr) (*(volatile u16 *)0x6800A084) -#define NAND_WAIT_READY(nand) udelay(10) - -#define NAND_NO_RB 1 - -#define CONFIG_SYS_NAND_WP -#define NAND_WP_OFF() do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0) -#define NAND_WP_ON() do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0) - -#define NAND_CTL_CLRALE(nandptr) -#define NAND_CTL_SETALE(nandptr) -#define NAND_CTL_CLRCLE(nandptr) -#define NAND_CTL_SETCLE(nandptr) -#define NAND_DISABLE_CE(nand) -#define NAND_ENABLE_CE(nand) - #define CONFIG_BOOTDELAY 3
#ifdef NFS_BOOT_DEFAULTS diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h index eab9629..f3dc7fe 100644 --- a/include/configs/sbc2410x.h +++ b/include/configs/sbc2410x.h @@ -201,29 +201,6 @@ #if defined(CONFIG_CMD_NAND) #define CONFIG_NAND_S3C2410 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -#define NAND_WAIT_READY(nand) NF_WaitRB() -#define NAND_DISABLE_CE(nand) NF_SetCE(NFCE_HIGH) -#define NAND_ENABLE_CE(nand) NF_SetCE(NFCE_LOW) -#define WRITE_NAND_COMMAND(d, adr) NF_Cmd(d) -#define WRITE_NAND_COMMANDW(d, adr) NF_CmdW(d) -#define WRITE_NAND_ADDRESS(d, adr) NF_Addr(d) -#define WRITE_NAND(d, adr) NF_Write(d) -#define READ_NAND(adr) NF_Read() -/* the following functions are NOP's because S3C24X0 handles this in hardware */ -#define NAND_CTL_CLRALE(nandptr) -#define NAND_CTL_SETALE(nandptr) -#define NAND_CTL_CLRCLE(nandptr) -#define NAND_CTL_SETCLE(nandptr) -/* #undef CONFIG_MTD_NAND_VERIFY_WRITE */ #endif /* CONFIG_CMD_NAND */
#define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 147233d..d16262b 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -118,7 +118,6 @@
#define CONFIG_CMD_DHCP #define CONFIG_CMD_MII -#define CONFIG_CMD_NAND #define CONFIG_CMD_NFS #define CONFIG_CMD_PING
@@ -446,90 +445,9 @@ #define NAND_SIZE 0x00010000 /* 64K */ #define NAND_BASE 0xF1000000
-/****************************************************************/ - -/* NAND */ -#define CONFIG_NAND_LEGACY -#define CONFIG_SYS_NAND_BASE NAND_BASE -#define CONFIG_MTD_NAND_ECC_JFFS2 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_MTD_NAND_UNSAFE - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#undef NAND_NO_RB - -#define SECTORSIZE 512 -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - -/* ALE = PC15, CLE = PB23, CE = PA7, F_RY_BY = PA6 */ -#define NAND_DISABLE_CE(nand) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat) |= (1 << (15 - 7)); \ - } while(0) - -#define NAND_ENABLE_CE(nand) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat) &= ~(1 << (15 - 7)); \ - } while(0) - -#define NAND_CTL_CLRALE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) &= ~(1 << (15 - 15)); \ - } while(0) - -#define NAND_CTL_SETALE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) |= (1 << (15 - 15)); \ - } while(0) - -#define NAND_CTL_CLRCLE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) &= ~(1 << (31 - 23)); \ - } while(0) - -#define NAND_CTL_SETCLE(nandptr) \ - do { \ - (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) |= (1 << (31 - 23)); \ - } while(0) - -#ifndef NAND_NO_RB -#define NAND_WAIT_READY(nand) \ - do { \ - int _tries = 0; \ - while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat & (1 << (15 - 6))) == 0) \ - if (++_tries > 100000) \ - break; \ - } while (0) -#else -#define NAND_WAIT_READY(nand) udelay(12) -#endif - -#define WRITE_NAND_COMMAND(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define WRITE_NAND_ADDRESS(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define WRITE_NAND(d, adr) \ - do { \ - *(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \ - } while(0) - -#define READ_NAND(adr) \ - ((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr))) - /*****************************************************************************/
#define CONFIG_SYS_DIRECT_FLASH_TFTP -#define CONFIG_SYS_DIRECT_NAND_TFTP
/*****************************************************************************/
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 3917a1b..425f472 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -147,12 +147,8 @@
#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP -#define CONFIG_CMD_DOC #define CONFIG_CMD_DATE
- -#define CONFIG_NAND_LEGACY - /* * Miscellaneous configurable options */ diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 15c3708..0500042 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -193,7 +193,6 @@ /* * NAND Flash */ -#define CONFIG_NEW_NAND_CODE #define CONFIG_SYS_NAND0_BASE 0x0 #undef CONFIG_SYS_NAND1_BASE
@@ -227,13 +226,6 @@ #define CONFIG_MTD_DEBUG #define CONFIG_MTD_DEBUG_VERBOSE 1
-#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 - #define CONFIG_SYS_NO_FLASH 1
#define CONFIG_ENV_IS_IN_NAND 1
participants (1)
-
Scott Wood