Hello

I can use the u-boot command interpreter on my MPC875 board. FEC1 is responsible for ethernet. So i set in my board config file:

#define CONFIG_ETHER_ON_FEC1 #define CONFIG_FEC_ENET #ifdef CONFIG_FEC_ENET #define CF_DISCOVER_PHY #define FEC_ENET #endif

when i call "ping target", i get the message "TX timeout". According the the debug output FEC1 just doesn't fetch data from the TX buffer, though ECNTRL and X_DES_ACTIVE set correctly. Any ideas how to solve this ?

big thanks

josef