On 13.1.2018 21:48, Ezequiel Garcia wrote:

NAND and QSPI devices are now supported, so mark them as such.

Cc: Michal Simek michal.simek@xilinx.com Signed-off-by: Ezequiel Garcia ezequiel@vanguardiasur.com.ar

---

doc/README.zynq | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/doc/README.zynq b/doc/README.zynq index b89c39edac18..451743f39eaa 100644 --- a/doc/README.zynq +++ b/doc/README.zynq @@ -62,9 +62,10 @@ bootmode strings at runtime. serial - drivers/serial/serial_zynq.c net - drivers/net/zynq_gem.c mmc - drivers/mmc/zynq_sdhci.c

• mmc - drivers/mmc/zynq_sdhci.c
• spi- drivers/spi/zynq_spi.c

• spi - drivers/spi/zynq_spi.c
• qspi - drivers/spi/zynq_qspi.c i2c - drivers/i2c/zynq_i2c.c
• nand - drivers/mtd/nand/zynq_nand.c

• Done proper cleanups on board configurations
• Added basic FDT support for zynq boards
• d-cache support for zynq_gem.c

@@ -72,8 +73,6 @@ bootmode strings at runtime. 6. TODO

• Add zynq boards support - zc770_xm011

-- Add zynq qspi controller driver -- Add zynq nand controller driver

• Add FDT support on individual drivers

[1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm

Applied.

Thanks, Michal