[PATCH] configs: Enable ATF support for QSPI & NAND boot

From: Chee Hong Ang chee.hong.ang@intel.com
HSD #1508277418: Add defconfigs with ATF support for QSPI and NAND boot on Stratix10 and Agilex platforms.
Signed-off-by: Chee Hong Ang chee.hong.ang@intel.com Signed-off-by: Jit Loon Lim jit.loon.lim@intel.com --- configs/socfpga_agilex_nand_atf_defconfig | 88 +++++++++++++++++++ configs/socfpga_agilex_qspi_atf_defconfig | 76 +++++++++++++++++ configs/socfpga_stratix10_nand_atf_defconfig | 90 ++++++++++++++++++++ configs/socfpga_stratix10_qspi_atf_defconfig | 77 +++++++++++++++++ include/configs/socfpga_soc64_common.h | 22 +++++ 5 files changed, 353 insertions(+) create mode 100755 configs/socfpga_agilex_nand_atf_defconfig create mode 100755 configs/socfpga_agilex_qspi_atf_defconfig create mode 100755 configs/socfpga_stratix10_nand_atf_defconfig create mode 100755 configs/socfpga_stratix10_qspi_atf_defconfig
diff --git a/configs/socfpga_agilex_nand_atf_defconfig b/configs/socfpga_agilex_nand_atf_defconfig new file mode 100755 index 0000000000..a3b272d771 --- /dev/null +++ b/configs/socfpga_agilex_nand_atf_defconfig @@ -0,0 +1,88 @@ +CONFIG_ARM=y +CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds" +CONFIG_ARCH_SOCFPGA=y +CONFIG_SYS_TEXT_BASE=0x200000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x00200000 +CONFIG_DM_GPIO=y +CONFIG_SPL_TEXT_BASE=0xffe00000 +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y +CONFIG_IDENT_STRING="socfpga_agilex" +CONFIG_SPL_FS_FAT=y +CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex_socdk_nand" +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x2000000 +# CONFIG_USE_SPL_FIT_GENERATOR is not set +CONFIG_NAND_BOOT=y +CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="earlycon panic=-1" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run nandload; run linux_qspi_enable; run nandboot" +CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_CACHE=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SPL_ATF=y +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # " +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_CMD_NAND_LOCK_UNLOCK=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_MTDIDS_DEFAULT="nand0=ffb90000.nand.0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=ffb90000.nand.0:2m(u-boot),256k(env),256k(dtb),32m(kernel),32m(misc),-(rootfs)" +CONFIG_ENV_IS_IN_NAND=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_ALTERA_SDRAM=y +CONFIG_DWAPB_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_DW=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_DW=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_NAND_DENALI_DT=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x0 +CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x100000 +CONFIG_SPL_NAND_FRAMEWORK=y +CONFIG_SF_DEFAULT_MODE=0x2003 +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MII=y +CONFIG_DM_RESET=y +CONFIG_SPI=y +CONFIG_CADENCE_QSPI=y +CONFIG_DESIGNWARE_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_DWC2=y +CONFIG_USB_STORAGE=y +CONFIG_DESIGNWARE_WATCHDOG=y +CONFIG_WDT=y +# CONFIG_SPL_USE_TINY_PRINTF is not set \ No newline at end of file diff --git a/configs/socfpga_agilex_qspi_atf_defconfig b/configs/socfpga_agilex_qspi_atf_defconfig new file mode 100755 index 0000000000..8956abae36 --- /dev/null +++ b/configs/socfpga_agilex_qspi_atf_defconfig @@ -0,0 +1,76 @@ +CONFIG_ARM=y +CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds" +CONFIG_ARCH_SOCFPGA=y +CONFIG_SYS_TEXT_BASE=0x200000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_SIZE=0x1000 +CONFIG_ENV_OFFSET=0x020C0000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 +CONFIG_DM_GPIO=y +CONFIG_SPL_TEXT_BASE=0xFFE00000 +CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y +CONFIG_IDENT_STRING="socfpga_agilex" +CONFIG_SPL_FS_FAT=y +CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex_socdk_qspi" +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x2000000 +# CONFIG_USE_SPL_FIT_GENERATOR is not set +CONFIG_QSPI_BOOT=y +CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="earlycon panic=-1" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe;run qspiload;run linux_qspi_enable;rsu dtb;run qspiboot" +CONFIG_SPL_CACHE=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SPL_ATF=y +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # " +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MTD=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_BLK=y +CONFIG_SPL_ALTERA_SDRAM=y +CONFIG_DWAPB_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_DW=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_SF_DEFAULT_MODE=0x2003 +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MII=y +CONFIG_DM_RESET=y +CONFIG_SPI=y +CONFIG_CADENCE_QSPI=y +CONFIG_DESIGNWARE_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_DWC2=y +CONFIG_USB_STORAGE=y +CONFIG_DESIGNWARE_WATCHDOG=y +CONFIG_WDT=y +# CONFIG_SPL_USE_TINY_PRINTF is not set +CONFIG_PANIC_HANG=y \ No newline at end of file diff --git a/configs/socfpga_stratix10_nand_atf_defconfig b/configs/socfpga_stratix10_nand_atf_defconfig new file mode 100755 index 0000000000..cbb3f88ec2 --- /dev/null +++ b/configs/socfpga_stratix10_nand_atf_defconfig @@ -0,0 +1,90 @@ +CONFIG_ARM=y +CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds" +CONFIG_ARCH_SOCFPGA=y +CONFIG_SYS_TEXT_BASE=0x200000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0x00200000 +CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 +CONFIG_DM_GPIO=y +CONFIG_SPL_TEXT_BASE=0xFFE00000 +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y +CONFIG_IDENT_STRING="socfpga_stratix10" +CONFIG_SPL_FS_FAT=y +CONFIG_DEFAULT_DEVICE_TREE="socfpga_stratix10_socdk_nand" +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x2000000 +# CONFIG_USE_SPL_FIT_GENERATOR is not set +CONFIG_NAND_BOOT=y +CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="earlycon panic=-1" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run nandload; run linux_qspi_enable; rsu dtb; run nandboot" +CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SPL_ATF=y +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="SOCFPGA_STRATIX10 # " +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_CMD_NAND_LOCK_UNLOCK=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_MTDIDS_DEFAULT="nand0=ffb90000.nand.0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=ffb90000.nand.0:2m(u-boot),256k(env),256k(dtb),32m(kernel),32m(misc),-(rootfs)" +CONFIG_ENV_IS_IN_NAND=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SPL_ALTERA_SDRAM=y +CONFIG_FPGA_INTEL_PR=y +CONFIG_DWAPB_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_DW=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_DW=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_NAND_DENALI_DT=y +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y +CONFIG_SYS_NAND_U_BOOT_OFFS=0x0 +CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x100000 +CONFIG_SPL_NAND_FRAMEWORK=y +CONFIG_SF_DEFAULT_MODE=0x2003 +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MII=y +CONFIG_DM_RESET=y +CONFIG_SPI=y +CONFIG_CADENCE_QSPI=y +CONFIG_DESIGNWARE_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_DWC2=y +CONFIG_USB_STORAGE=y +CONFIG_DESIGNWARE_WATCHDOG=y +CONFIG_WDT=y +# CONFIG_SPL_USE_TINY_PRINTF is not set +CONFIG_PANIC_HANG=y \ No newline at end of file diff --git a/configs/socfpga_stratix10_qspi_atf_defconfig b/configs/socfpga_stratix10_qspi_atf_defconfig new file mode 100755 index 0000000000..16ee4896d0 --- /dev/null +++ b/configs/socfpga_stratix10_qspi_atf_defconfig @@ -0,0 +1,77 @@ +CONFIG_ARM=y +CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds" +CONFIG_ARCH_SOCFPGA=y +CONFIG_SYS_TEXT_BASE=0x200000 +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_SIZE=0x1000 +CONFIG_ENV_OFFSET=0x020C0000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 +CONFIG_DM_GPIO=y +CONFIG_SPL_TEXT_BASE=0xFFE00000 +CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y +CONFIG_IDENT_STRING="socfpga_stratix10" +CONFIG_SPL_FS_FAT=y +CONFIG_DEFAULT_DEVICE_TREE="socfpga_stratix10_socdk_qspi" +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x2000000 +# CONFIG_USE_SPL_FIT_GENERATOR is not set +CONFIG_QSPI_BOOT=y +CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="earlycon panic=-1" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="sf probe;run qspiload;run linux_qspi_enable;rsu dtb;run qspiboot" +CONFIG_SPL_SPI_LOAD=y +CONFIG_SPL_ATF=y +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="SOCFPGA_STRATIX10 # " +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MTD=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_BLK=y +CONFIG_SPL_ALTERA_SDRAM=y +CONFIG_FPGA_INTEL_PR=y +CONFIG_DWAPB_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_DW=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_SF_DEFAULT_MODE=0x2003 +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MII=y +CONFIG_DM_RESET=y +CONFIG_SPI=y +CONFIG_CADENCE_QSPI=y +CONFIG_DESIGNWARE_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_DWC2=y +CONFIG_USB_STORAGE=y +CONFIG_DESIGNWARE_WATCHDOG=y +CONFIG_WDT=y +# CONFIG_SPL_USE_TINY_PRINTF is not set +CONFIG_PANIC_HANG=y \ No newline at end of file diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 06198ddd82..8a9f4dc4c9 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -33,10 +33,32 @@ * U-Boot environment configurations */
+ /* + * NAND support + */ +#ifdef CONFIG_NAND_DENALI +#ifndef CONFIG_SPL_FIT +#define CONFIG_SPL_NAND_RAW_ONLY +#endif +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +#define CONFIG_SYS_NAND_U_BOOT_SIZE (1 * 1024 * 1024) +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE +#endif /* CONFIG_NAND_DENALI */ + /* * Environment variable */ #define CONFIG_EXTRA_ENV_SETTINGS \ + "qspibootimageaddr=0x020E0000\0" \ + "qspifdtaddr=0x020D0000\0" \ + "bootimagesize=0x01F00000\0" \ + "fdtimagesize=0x00010000\0" \ + "qspiload=sf read ${loadaddr} ${qspibootimageaddr} ${bootimagesize};" \ + "sf read ${fdt_addr} ${qspifdtaddr} ${fdtimagesize}\0" \ + "qspiboot=setenv bootargs earlycon root=/dev/mtdblock1 rw " \ + "rootfstype=jffs2 rootwait;booti ${loadaddr} - ${fdt_addr}\0" \ "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "bootfile=" CONFIG_BOOTFILE "\0" \ "fdt_addr=8000000\0" \
participants (1)
-
Jit Loon Lim