On 11/12/21 11:10 PM, Quentin Schulz wrote:

Allow the dm driver be omitted by SPL.

Cc: Quentin Schulz foss+u-boot@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com

Reviewed-by: Jaehoon Chung jh80.chung@samsung.com

Best Regards, Jaehoon Chung

---

drivers/power/pmic/Kconfig | 14 ++++++++++++++ drivers/power/pmic/Makefile | 2 +- 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index b9fda428df..ce0adb18a4 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -128,6 +128,20 @@ config DM_PMIC_FAN53555 The driver implements read/write operations for use with the FAN53555 regulator driver and binds the regulator driver to its node.

+config SPL_DM_PMIC_FAN53555

• bool "Enable support for OnSemi FAN53555 in SPL"
• depends on SPL_DM_REGULATOR && SPL_DM_I2C
• select SPL_DM_REGULATOR_FAN53555
• help

•  This config enables implementation of driver-model PMIC
  

•  uclass features for the FAN53555 regulator. The FAN53555 is
  

•  a (family of) single-output regulators that supports
  

•  transitioning between two different output voltages based on
  

•  an voltage selection pin.
  

•  The driver implements read/write operations for use with the FAN53555
  

•  regulator driver and binds the regulator driver to its node.
  

config DM_PMIC_MP5416 bool "Enable Driver Model for PMIC MP5416" help diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index e1922df00f..401cde32cf 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -4,7 +4,7 @@ # Lukasz Majewski l.majewski@samsung.com

obj-$(CONFIG_$(SPL_TPL_)DM_PMIC) += pmic-uclass.o -obj-$(CONFIG_DM_PMIC_FAN53555) += fan53555.o +obj-$(CONFIG_$(SPL_)DM_PMIC_FAN53555) += fan53555.o obj-$(CONFIG_$(SPL_)DM_PMIC_DA9063) += da9063.o obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o