Update all A80 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commits.

arch/arm/boot/dts/sun9i-a80*:

commit 190e3138f9577885691540dca59c2f07540bde04 Merge: cafc87023b0d a7affb13b271 Author: Arnd Bergmann arnd@arndb.de Date: Tue Mar 27 14:58:00 2018 +0200

Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt

include/dt-bindings/*/sun9i-a80-*:

commit 783ab76ae553abc23f80ef7511052d055697531b Author: Chen-Yu Tsai wens@csie.org Date: Sat Jan 28 20:22:36 2017 +0800

clk: sunxi-ng: Add A80 Display Engine CCU

Note: sun9i-a80-cx-a99.dts is updated only uart0, since the same dts is not available in Linux.

Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- arch/arm/dts/sun9i-a80-cubieboard4.dts | 260 ++++- arch/arm/dts/sun9i-a80-cx-a99.dts | 2 +- arch/arm/dts/sun9i-a80-optimus.dts | 227 ++++- arch/arm/dts/sun9i-a80.dtsi | 1062 +++++++++++++-------- include/dt-bindings/clock/sun9i-a80-ccu.h | 162 ++++ include/dt-bindings/clock/sun9i-a80-de.h | 80 ++ include/dt-bindings/clock/sun9i-a80-usb.h | 59 ++ include/dt-bindings/reset/sun9i-a80-ccu.h | 102 ++ include/dt-bindings/reset/sun9i-a80-de.h | 58 ++ include/dt-bindings/reset/sun9i-a80-usb.h | 56 ++ 10 files changed, 1597 insertions(+), 471 deletions(-) create mode 100644 include/dt-bindings/clock/sun9i-a80-ccu.h create mode 100644 include/dt-bindings/clock/sun9i-a80-de.h create mode 100644 include/dt-bindings/clock/sun9i-a80-usb.h create mode 100644 include/dt-bindings/reset/sun9i-a80-ccu.h create mode 100644 include/dt-bindings/reset/sun9i-a80-de.h create mode 100644 include/dt-bindings/reset/sun9i-a80-usb.h

diff --git a/arch/arm/dts/sun9i-a80-cubieboard4.dts b/arch/arm/dts/sun9i-a80-cubieboard4.dts index 1526b41c70..85da85faf8 100644 --- a/arch/arm/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts @@ -47,7 +47,6 @@ #include "sun9i-a80.dtsi"

#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h>

/ { model = "Cubietech Cubieboard4"; @@ -63,8 +62,6 @@

leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubieboard4>;

green { label = "cubieboard4:green:usr"; @@ -76,18 +73,96 @@ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ }; }; + + vga-connector { + compatible = "vga-connector"; + label = "vga"; + ddc-i2c-bus = <&i2c3>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_dac_out>; + }; + }; + }; + + vga-dac { + compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac"; + vdd-supply = <&reg_dcdc1>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vga_dac_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + vga_dac_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; +}; + +&de { + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; };

&mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ - cd-inverted; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */ + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&reg_dldo1>; + vqmmc-supply = <&reg_cldo3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; status = "okay"; };

+&mmc1_pins { + bias-pull-up; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -100,23 +175,12 @@

&mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; };

-&pio { - led_pins_cubieboard4: led-pins@0 { - allwinner,pins = "PH6", "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; +&osc32k { + /* osc32k input is from AC100 */ + clocks = <&ac100_rtc 0>; };

&r_ir { @@ -248,14 +312,166 @@ reg_rtc_ldo: rtc_ldo { regulator-name = "vcc-rtc-vdd1v8-io"; }; + + sw { + /* unused */ + }; + }; + }; + + axp806: pmic@745 { + compatible = "x-powers,axp806"; + reg = <0x745>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + bldoin-supply = <&reg_dcdce>; + + regulators { + reg_s_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + + aldo2 { + /* + * unused, but use a different name to + * avoid name clash with axp809's aldo's + */ + regulator-name = "s_aldo2"; + }; + + aldo3 { + /* + * unused, but use a different name to + * avoid name clash with axp809's aldo's + */ + regulator-name = "s_aldo3"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-name = "vcc18-efuse-adc-display-csi"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-name = + "vdd18-drampll-vcc18-pll-cpvdd"; + }; + + bldo3 { + /* unused */ + }; + + reg_bldo4: bldo4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vcc12-hsic"; + }; + + reg_cldo1: cldo1 { + /* + * This was 3V in the original design, but + * 3.3V is the recommended supply voltage + * for the Ethernet PHY. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-gmac-phy"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "afvcc-cam"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io-wifi-codec-io2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpub"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-vpu"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + regulator-name = "vcc-bldo-codec-ldoin"; + }; + + sw { + /* + * unused, but use a different name to + * avoid name clash with axp809's sw + */ + regulator-name = "s_sw"; + }; + }; + }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; }; }; };

#include "axp809.dtsi"

+&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd0_rgb888_pins>; +}; + +&tcon0_out { + tcon0_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_dac_in>; + }; +}; + &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun9i-a80-cx-a99.dts b/arch/arm/dts/sun9i-a80-cx-a99.dts index a30b6fec56..cf126bbd2c 100644 --- a/arch/arm/dts/sun9i-a80-cx-a99.dts +++ b/arch/arm/dts/sun9i-a80-cx-a99.dts @@ -365,7 +365,7 @@ */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; };

diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts index 7fd22e8886..58a199b0e4 100644 --- a/arch/arm/dts/sun9i-a80-optimus.dts +++ b/arch/arm/dts/sun9i-a80-optimus.dts @@ -46,7 +46,6 @@ #include "sun9i-a80.dtsi"

#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h>

/ { model = "Merrii A80 Optimus Board"; @@ -63,11 +62,8 @@

leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;

/* The LED names match those found on the board */ - led2 { label = "optimus:led2:usr"; gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; @@ -87,8 +83,6 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_optimus>; - regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -98,13 +92,19 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_pin_optimus>; - regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; };

&ehci0 { @@ -112,7 +112,8 @@ };

&ehci1 { - status = "okay"; + /* Enable if HSIC peripheral is connected */ + status = "disabled"; };

&ehci2 { @@ -121,14 +122,28 @@

&mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&reg_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ - cd-inverted; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH8 */ + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&reg_dldo1>; + vqmmc-supply = <&reg_cldo3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; status = "okay"; };

+&mmc1_pins { + bias-pull-up; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -141,7 +156,7 @@

&mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; };

&ohci0 { @@ -152,49 +167,15 @@ status = "okay"; };

-&pio { - led_pins_optimus: led-pins@0 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_optimus: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb1_vbus_pin_optimus: usb1_vbus_pin@1 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb3_vbus_pin_optimus: usb3_vbus_pin@1 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&osc32k { + /* osc32k input is from AC100 */ + clocks = <&ac100_rtc 0>; };

&r_ir { status = "okay"; };

-&r_pio { - led_r_pins_optimus: led-pins@1 { - allwinner,pins = "PM15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - &r_rsb { status = "okay";

@@ -320,6 +301,146 @@ reg_rtc_ldo: rtc_ldo { regulator-name = "vcc-rtc-vdd1v8-io"; }; + + sw { + /* unused */ + }; + }; + }; + + axp806: pmic@745 { + compatible = "x-powers,axp806"; + reg = <0x745>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + bldoin-supply = <&reg_dcdce>; + + regulators { + reg_s_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + + aldo2 { + /* + * unused, but use a different name to + * avoid name clash with axp809's aldo's + */ + regulator-name = "s_aldo2"; + }; + + aldo3 { + /* + * unused, but use a different name to + * avoid name clash with axp809's aldo's + */ + regulator-name = "s_aldo3"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-name = "vcc18-efuse-adc-display-csi"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-name = + "vdd18-drampll-vcc18-pll-cpvdd"; + }; + + bldo3 { + /* unused */ + }; + + reg_bldo4: bldo4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vcc12-hsic"; + }; + + reg_cldo1: cldo1 { + /* + * This was 3V in the original design, but + * 3.3V is the recommended supply voltage + * for the Ethernet PHY. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-gmac-phy"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "afvcc-cam"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io-wifi-codec-io2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpub"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-vpu"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + regulator-name = "vcc-bldo-codec-ldoin"; + }; + + sw { + /* + * unused, but use a different name to + * avoid name clash with axp809's sw + */ + regulator-name = "s_sw"; + }; + }; + }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; }; }; }; @@ -328,7 +449,7 @@

&uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; };

@@ -338,7 +459,9 @@ };

&usbphy2 { - status = "okay"; + phy-supply = <&reg_bldo4>; + /* Enable if HSIC peripheral is connected */ + status = "disabled"; };

&usbphy3 { diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi index 92412b2ac1..25591d6883 100644 --- a/arch/arm/dts/sun9i-a80.dtsi +++ b/arch/arm/dts/sun9i-a80.dtsi @@ -42,13 +42,18 @@ * OTHER DEALINGS IN THE SOFTWARE. */

-#include "skeleton64.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h>

-#include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/clock/sun9i-a80-ccu.h> +#include <dt-bindings/clock/sun9i-a80-de.h> +#include <dt-bindings/clock/sun9i-a80-usb.h> +#include <dt-bindings/reset/sun9i-a80-ccu.h> +#include <dt-bindings/reset/sun9i-a80-de.h> +#include <dt-bindings/reset/sun9i-a80-usb.h>

/ { + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>;

cpus { @@ -58,57 +63,76 @@ cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x0>; };

cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x1>; };

cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x2>; };

cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x3>; };

cpu4: cpu@100 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x100>; };

cpu5: cpu@101 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x101>; };

cpu6: cpu@102 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x102>; };

cpu7: cpu@103 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x103>; }; };

- memory { - /* 8GB max. with LPAE */ - reg = <0 0x20000000 0x02 0>; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -139,7 +163,7 @@ * would also throw all the PLL clock rates off, or just the * downstream clocks in the PRCM. */ - osc24M: osc24M_clk { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -148,244 +172,28 @@

/* * The 32k clock is from an external source, normally the - * AC100 codec/RTC chip. This clock is by default enabled - * and clocked at 32768 Hz, from the oscillator connected - * to the AC100. It is configurable, but no such driver or - * bindings exist yet. + * AC100 codec/RTC chip. This serves as a placeholder for + * board dts files to specify the source. */ - osc32k: osc32k_clk { + osc32k: clk-32k { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; clock-output-names = "osc32k"; };

- usb_mod_clk: clk@00a08000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun9i-a80-usb-mod-clk"; - reg = <0x00a08000 0x4>; - clocks = <&ahb1_gates 1>; - clock-output-names = "usb0_ahb", "usb_ohci0", - "usb1_ahb", "usb_ohci1", - "usb2_ahb", "usb_ohci2"; - }; - - usb_phy_clk: clk@00a08004 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun9i-a80-usb-phy-clk"; - reg = <0x00a08004 0x4>; - clocks = <&ahb1_gates 1>; - clock-output-names = "usb_phy0", "usb_hsic1_480M", - "usb_phy1", "usb_hsic2_480M", - "usb_phy2", "usb_hsic_12M"; - }; - - pll3: clk@06000008 { - /* placeholder until implemented */ - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-rate = <0>; - clock-output-names = "pll3"; - }; - - pll4: clk@0600000c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-pll4-clk"; - reg = <0x0600000c 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll12: clk@0600002c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-pll4-clk"; - reg = <0x0600002c 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll12"; - }; - - gt_clk: clk@0600005c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-gt-clk"; - reg = <0x0600005c 0x4>; - clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "gt"; - }; - - ahb0: clk@06000060 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000060 0x4>; - clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb0"; - }; - - ahb1: clk@06000064 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000064 0x4>; - clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb1"; - }; - - ahb2: clk@06000068 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000068 0x4>; - clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb2"; - }; - - apb0: clk@06000070 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-apb0-clk"; - reg = <0x06000070 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "apb0"; - }; - - apb1: clk@06000074 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-apb1-clk"; - reg = <0x06000074 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "apb1"; - }; - - cci400_clk: clk@06000078 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-gt-clk"; - reg = <0x06000078 0x4>; - clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "cci400"; - }; - - mmc0_clk: clk@06000410 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000410 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc0", "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@06000414 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000414 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc1", "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@06000418 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000418 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc2", "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@0600041c { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x0600041c 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc3", "mmc3_output", - "mmc3_sample"; - }; - - ahb0_gates: clk@06000580 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb0-gates-clk"; - reg = <0x06000580 0x4>; - clocks = <&ahb0>; - clock-indices = <0>, <1>, <3>, - <5>, <8>, <12>, - <13>, <14>, - <15>, <16>, <18>, - <20>, <21>, <22>, - <23>; - clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu", - "ahb0_ss", "ahb0_sd", "ahb0_nand1", - "ahb0_nand0", "ahb0_sdram", - "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts", - "ahb0_spi0", "ahb0_spi1", "ahb0_spi2", - "ahb0_spi3"; - }; - - ahb1_gates: clk@06000584 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb1-gates-clk"; - reg = <0x06000584 0x4>; - clocks = <&ahb1>; - clock-indices = <0>, <1>, - <17>, <21>, - <22>, <23>, - <24>; - clock-output-names = "ahb1_usbotg", "ahb1_usbhci", - "ahb1_gmac", "ahb1_msgbox", - "ahb1_spinlock", "ahb1_hstimer", - "ahb1_dma"; - }; - - ahb2_gates: clk@06000588 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb2-gates-clk"; - reg = <0x06000588 0x4>; - clocks = <&ahb2>; - clock-indices = <0>, <1>, - <2>, <4>, <5>, - <7>, <8>, <11>; - clock-output-names = "ahb2_lcd0", "ahb2_lcd1", - "ahb2_edp", "ahb2_csi", "ahb2_hdmi", - "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi"; - }; - - apb0_gates: clk@06000590 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-apb0-gates-clk"; - reg = <0x06000590 0x4>; - clocks = <&apb0>; - clock-indices = <1>, <5>, - <11>, <12>, <13>, - <15>, <17>, <18>, - <19>; - clock-output-names = "apb0_spdif", "apb0_pio", - "apb0_ac97", "apb0_i2s0", "apb0_i2s1", - "apb0_lradc", "apb0_gpadc", "apb0_twd", - "apb0_cirtx"; - }; - - apb1_gates: clk@06000594 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-apb1-gates-clk"; - reg = <0x06000594 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <16>, <17>, - <18>, <19>, - <20>, <21>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_i2c3", "apb1_i2c4", - "apb1_uart0", "apb1_uart1", - "apb1_uart2", "apb1_uart3", - "apb1_uart4", "apb1_uart5"; - }; - - cpus_clk: clk@08001410 { + cpus_clk: clk@8001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>; + clocks = <&osc32k>, <&osc24M>, + <&ccu CLK_PLL_PERIPH0>, + <&ccu CLK_PLL_AUDIO>; clock-output-names = "cpus"; };

- ahbs: ahbs_clk { + ahbs: clk-ahbs { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -394,7 +202,7 @@ clock-output-names = "ahbs"; };

- apbs: clk@0800141c { + apbs: clk@800141c { compatible = "allwinner,sun8i-a23-apb0-clk"; reg = <0x0800141c 0x4>; #clock-cells = <0>; @@ -402,7 +210,7 @@ clock-output-names = "apbs"; };

- apbs_gates: clk@08001428 { + apbs_gates: clk@8001428 { compatible = "allwinner,sun9i-a80-apbs-gates-clk"; reg = <0x08001428 0x4>; #clock-cells = <1>; @@ -423,7 +231,7 @@ "apbs_i2s1", "apbs_twd"; };

- r_1wire_clk: clk@08001450 { + r_1wire_clk: clk@8001450 { reg = <0x08001450 0x4>; #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -431,7 +239,7 @@ clock-output-names = "r_1wire"; };

- r_ir_clk: clk@08001454 { + r_ir_clk: clk@8001454 { reg = <0x08001454 0x4>; #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -440,6 +248,12 @@ }; };

+ de: display-engine { + compatible = "allwinner,sun9i-a80-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -450,103 +264,149 @@ */ ranges = <0 0 0 0x20000000>;

- ehci0: usb@00a00000 { + sram_b: sram@20000 { + /* 256 KiB secure SRAM at 0x20000 */ + compatible = "mmio-sram"; + reg = <0x00020000 0x40000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00020000 0x40000>; + + smp-sram@1000 { + /* + * This is checked by BROM to determine if + * cpu0 should jump to SMP entry vector + */ + compatible = "allwinner,sun9i-a80-smp-sram"; + reg = <0x1000 0x8>; + }; + }; + + ehci0: usb@a00000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 1>; - resets = <&usb_mod_clk 17>; + clocks = <&usb_clocks CLK_BUS_HCI0>; + resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; };

- ohci0: usb@00a00400 { + ohci0: usb@a00400 { compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a00400 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>; - resets = <&usb_mod_clk 17>; + clocks = <&usb_clocks CLK_BUS_HCI0>, + <&usb_clocks CLK_USB_OHCI0>; + resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; };

- usbphy1: phy@00a00800 { + usbphy1: phy@a00800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a00800 0x4>; - clocks = <&usb_phy_clk 1>; + clocks = <&usb_clocks CLK_USB0_PHY>; clock-names = "phy"; - resets = <&usb_phy_clk 17>; + resets = <&usb_clocks RST_USB0_PHY>; reset-names = "phy"; status = "disabled"; #phy-cells = <0>; };

- ehci1: usb@00a01000 { + ehci1: usb@a01000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a01000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 3>; - resets = <&usb_mod_clk 18>; + clocks = <&usb_clocks CLK_BUS_HCI1>; + resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; phy-names = "usb"; status = "disabled"; };

- usbphy2: phy@00a01800 { + usbphy2: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; - clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, - <&usb_phy_clk 3>; - clock-names = "hsic_480M", "hsic_12M", "phy"; - resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; - reset-names = "hsic", "phy"; + clocks = <&usb_clocks CLK_USB1_HSIC>, + <&usb_clocks CLK_USB_HSIC>, + <&usb_clocks CLK_USB1_PHY>; + clock-names = "hsic_480M", + "hsic_12M", + "phy"; + resets = <&usb_clocks RST_USB1_HSIC>, + <&usb_clocks RST_USB1_PHY>; + reset-names = "hsic", + "phy"; status = "disabled"; #phy-cells = <0>; /* usb1 is always used with HSIC */ phy_type = "hsic"; };

- ehci2: usb@00a02000 { + ehci2: usb@a02000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a02000 0x100>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 5>; - resets = <&usb_mod_clk 19>; + clocks = <&usb_clocks CLK_BUS_HCI2>; + resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; phy-names = "usb"; status = "disabled"; };

- ohci2: usb@00a02400 { + ohci2: usb@a02400 { compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a02400 0x100>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>; - resets = <&usb_mod_clk 19>; + clocks = <&usb_clocks CLK_BUS_HCI2>, + <&usb_clocks CLK_USB_OHCI2>; + resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; phy-names = "usb"; status = "disabled"; };

- usbphy3: phy@00a02800 { + usbphy3: phy@a02800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a02800 0x4>; - clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>, - <&usb_phy_clk 5>; - clock-names = "hsic_480M", "hsic_12M", "phy"; - resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>; - reset-names = "hsic", "phy"; + clocks = <&usb_clocks CLK_USB2_HSIC>, + <&usb_clocks CLK_USB_HSIC>, + <&usb_clocks CLK_USB2_PHY>; + clock-names = "hsic_480M", + "hsic_12M", + "phy"; + resets = <&usb_clocks RST_USB2_HSIC>, + <&usb_clocks RST_USB2_PHY>; + reset-names = "hsic", + "phy"; status = "disabled"; #phy-cells = <0>; };

- mmc0: mmc@01c0f000 { + usb_clocks: clock@a08000 { + compatible = "allwinner,sun9i-a80-usb-clks"; + reg = <0x00a08000 0x8>; + clocks = <&ccu CLK_BUS_USB>, <&osc24M>; + clock-names = "bus", "hosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cpucfg@1700000 { + compatible = "allwinner,sun9i-a80-cpucfg"; + reg = <0x01700000 0x100>; + }; + + mmc0: mmc@1c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>, - <&mmc0_clk 1>, <&mmc0_clk 2>; + clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 0>; reset-names = "ahb"; @@ -556,11 +416,12 @@ #size-cells = <0>; };

- mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>, - <&mmc1_clk 1>, <&mmc1_clk 2>; + clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 1>; reset-names = "ahb"; @@ -570,11 +431,12 @@ #size-cells = <0>; };

- mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>, - <&mmc2_clk 1>, <&mmc2_clk 2>; + clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 2>; reset-names = "ahb"; @@ -584,11 +446,12 @@ #size-cells = <0>; };

- mmc3: mmc@01c12000 { + mmc3: mmc@1c12000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>, - <&mmc3_clk 1>, <&mmc3_clk 2>; + clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>, + <&ccu CLK_MMC3_OUTPUT>, + <&ccu CLK_MMC3_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 3>; reset-names = "ahb"; @@ -598,12 +461,12 @@ #size-cells = <0>; };

- mmc_config_clk: clk@01c13000 { + mmc_config_clk: clk@1c13000 { compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; - clocks = <&ahb0_gates 8>; + clocks = <&ccu CLK_BUS_MMC>; clock-names = "ahb"; - resets = <&ahb0_resets 8>; + resets = <&ccu RST_BUS_MMC>; reset-names = "ahb"; #clock-cells = <1>; #reset-cells = <1>; @@ -611,10 +474,10 @@ "mmc2_config", "mmc3_config"; };

- gic: interrupt-controller@01c41000 { + gic: interrupt-controller@1c41000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c41000 0x1000>, - <0x01c42000 0x1000>, + <0x01c42000 0x2000>, <0x01c44000 0x2000>, <0x01c46000 0x2000>; interrupt-controller; @@ -622,37 +485,435 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; };

- ahb0_resets: reset@060005a0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a0 0x4>; + cci: cci@1c90000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c90000 0x1000>; + ranges = <0x0 0x01c90000 0x10000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + }; };

- ahb1_resets: reset@060005a4 { + de_clocks: clock@3000000 { + compatible = "allwinner,sun9i-a80-de-clks"; + reg = <0x03000000 0x30>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_SDRAM>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "dram", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a4 0x4>; };

- ahb2_resets: reset@060005a8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a8 0x4>; + fe0: display-frontend@3100000 { + compatible = "allwinner,sun9i-a80-display-frontend"; + reg = <0x03100000 0x40000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>, + <&de_clocks CLK_DRAM_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_deu0: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu0_in_fe0>; + }; + }; + }; };

- apb0_resets: reset@060005b0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005b0 0x4>; + fe1: display-frontend@3140000 { + compatible = "allwinner,sun9i-a80-display-frontend"; + reg = <0x03140000 0x40000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>, + <&de_clocks CLK_DRAM_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_deu1: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu1_in_fe1>; + }; + }; + }; + }; + + be0: display-backend@3200000 { + compatible = "allwinner,sun9i-a80-display-backend"; + reg = <0x03200000 0x40000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>, + <&de_clocks CLK_DRAM_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_deu0: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu0_out_be0>; + }; + + be0_in_deu1: endpoint@1 { + reg = <1>; + remote-endpoint = <&deu1_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + be1: display-backend@3240000 { + compatible = "allwinner,sun9i-a80-display-backend"; + reg = <0x03240000 0x40000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>, + <&de_clocks CLK_DRAM_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_BE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_deu0: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu0_out_be1>; + }; + + be1_in_deu1: endpoint@1 { + reg = <1>; + remote-endpoint = <&deu1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_drc1: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc1_in_be1>; + }; + }; + }; + }; + + deu0: deu@3300000 { + compatible = "allwinner,sun9i-a80-deu"; + reg = <0x03300000 0x40000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DEU0>, + <&de_clocks CLK_IEP_DEU0>, + <&de_clocks CLK_DRAM_DEU0>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DEU0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + deu0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + deu0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_deu0>; + }; + }; + + deu0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + deu0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_deu0>; + }; + + deu0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_deu0>; + }; + }; + }; + }; + + deu1: deu@3340000 { + compatible = "allwinner,sun9i-a80-deu"; + reg = <0x03340000 0x40000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DEU1>, + <&de_clocks CLK_IEP_DEU1>, + <&de_clocks CLK_DRAM_DEU1>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DEU1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + deu1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + deu1_in_fe1: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe1_out_deu1>; + }; + }; + + deu1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + deu1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_deu1>; + }; + + deu1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_deu1>; + }; + }; + }; + }; + + drc0: drc@3400000 { + compatible = "allwinner,sun9i-a80-drc"; + reg = <0x03400000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DRC0>, + <&de_clocks CLK_IEP_DRC0>, + <&de_clocks CLK_DRAM_DRC0>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DRC0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + + drc1: drc@3440000 { + compatible = "allwinner,sun9i-a80-drc"; + reg = <0x03440000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DRC1>, + <&de_clocks CLK_IEP_DRC1>, + <&de_clocks CLK_DRAM_DRC1>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DRC1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc1_in_be1: endpoint@0 { + reg = <0>; + remote-endpoint = <&be1_out_drc1>; + }; + }; + + drc1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc1_out_tcon1: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon1_in_drc1>; + }; + }; + }; + }; + + tcon0: lcd-controller@3c00000 { + compatible = "allwinner,sun9i-a80-tcon-lcd"; + reg = <0x03c00000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; + clock-names = "ahb", "tcon-ch0"; + resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>; + reset-names = "lcd", "edp"; + clock-output-names = "tcon0-pixel-clock"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; };

- apb1_resets: reset@060005b4 { + tcon1: lcd-controller@3c10000 { + compatible = "allwinner,sun9i-a80-tcon-tv"; + reg = <0x03c10000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>; + reset-names = "lcd", "edp"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_drc1: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + ccu: clock@6000000 { + compatible = "allwinner,sun9i-a80-ccu"; + reg = <0x06000000 0x800>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005b4 0x4>; };

- timer@06000c00 { + timer@6000c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x06000c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, @@ -665,13 +926,13 @@ clocks = <&osc24M>; };

- wdt: watchdog@06000ca0 { + wdt: watchdog@6000ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x06000ca0 0x20>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; };

- pio: pinctrl@06000800 { + pio: pinctrl@6000800 { compatible = "allwinner,sun9i-a80-pinctrl"; reg = <0x06000800 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, @@ -679,195 +940,206 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 5>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #size-cells = <0>; #gpio-cells = <3>;

- i2c3_pins_a: i2c3@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "i2c3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + i2c3_pins: i2c3-pins { + pins = "PG10", "PG11"; + function = "i2c3"; + }; + + lcd0_rgb888_pins: lcd0-rgb888-pins { + pins = "PD0", "PD1", "PD2", "PD3", + "PD4", "PD5", "PD6", "PD7", + "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD14", "PD15", + "PD16", "PD17", "PD18", "PD19", + "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; };

- mmc0_pins: mmc0 { - allwinner,pins = "PF0", "PF1" ,"PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1" ,"PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; };

- mmc1_pins: mmc1 { - allwinner,pins = "PG0", "PG1" ,"PG2", "PG3", + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1" ,"PG2", "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; };

- mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", - "PC13", "PC14", "PC15", - "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + mmc2_8bit_pins: mmc2-8bit-pins { + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; };

- uart0_pins_a: uart0@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart0_ph_pins: uart0-ph-pins { + pins = "PH12", "PH13"; + function = "uart0"; };

- uart4_pins_a: uart4@0 { - allwinner,pins = "PG12", "PG13", "PG14", "PG15"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart4_pins: uart4-pins { + pins = "PG12", "PG13", "PG14", "PG15"; + function = "uart4"; }; };

- uart0: serial@07000000 { + uart0: serial@7000000 { compatible = "snps,dw-apb-uart"; reg = <0x07000000 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; - resets = <&apb1_resets 16>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; };

- uart1: serial@07000400 { + uart1: serial@7000400 { compatible = "snps,dw-apb-uart"; reg = <0x07000400 0x400>; interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; - resets = <&apb1_resets 17>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; };

- uart2: serial@07000800 { + uart2: serial@7000800 { compatible = "snps,dw-apb-uart"; reg = <0x07000800 0x400>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; - resets = <&apb1_resets 18>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; };

- uart3: serial@07000c00 { + uart3: serial@7000c00 { compatible = "snps,dw-apb-uart"; reg = <0x07000c00 0x400>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; - resets = <&apb1_resets 19>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; status = "disabled"; };

- uart4: serial@07001000 { + uart4: serial@7001000 { compatible = "snps,dw-apb-uart"; reg = <0x07001000 0x400>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 20>; - resets = <&apb1_resets 20>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; status = "disabled"; };

- uart5: serial@07001400 { + uart5: serial@7001400 { compatible = "snps,dw-apb-uart"; reg = <0x07001400 0x400>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 21>; - resets = <&apb1_resets 21>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; status = "disabled"; };

- i2c0: i2c@07002800 { + i2c0: i2c@7002800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002800 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 0>; - resets = <&apb1_resets 0>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; };

- i2c1: i2c@07002c00 { + i2c1: i2c@7002c00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002c00 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 1>; - resets = <&apb1_resets 1>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; };

- i2c2: i2c@07003000 { + i2c2: i2c@7003000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003000 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 2>; - resets = <&apb1_resets 2>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; };

- i2c3: i2c@07003400 { + i2c3: i2c@7003400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003400 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 3>; - resets = <&apb1_resets 3>; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; };

- i2c4: i2c@07003800 { + i2c4: i2c@7003800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003800 0x400>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 4>; - resets = <&apb1_resets 4>; + clocks = <&ccu CLK_BUS_I2C4>; + resets = <&ccu RST_BUS_I2C4>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; };

- r_wdt: watchdog@08001000 { + r_wdt: watchdog@8001000 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; };

- apbs_rst: reset@080014b0 { + prcm@8001400 { + compatible = "allwinner,sun9i-a80-prcm"; + reg = <0x08001400 0x200>; + }; + + apbs_rst: reset@80014b0 { reg = <0x080014b0 0x4>; compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; };

- nmi_intc: interrupt-controller@080015a0 { + nmi_intc: interrupt-controller@80015a0 { compatible = "allwinner,sun9i-a80-nmi"; interrupt-controller; #interrupt-cells = <2>; @@ -875,7 +1147,7 @@ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; };

- r_ir: ir@08002000 { + r_ir: ir@8002000 { compatible = "allwinner,sun5i-a13-ir"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; @@ -887,7 +1159,7 @@ status = "disabled"; };

- r_uart: serial@08002800 { + r_uart: serial@8002800 { compatible = "snps,dw-apb-uart"; reg = <0x08002800 0x400>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -898,35 +1170,33 @@ status = "disabled"; };

- r_pio: pinctrl@08002c00 { + r_pio: pinctrl@8002c00 { compatible = "allwinner,sun9i-a80-r-pinctrl"; reg = <0x08002c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apbs_gates 0>; + clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; resets = <&apbs_rst 0>; gpio-controller; interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; + #interrupt-cells = <3>; #gpio-cells = <3>;

- r_ir_pins: r_ir { - allwinner,pins = "PL6"; - allwinner,function = "s_cir_rx"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + r_ir_pins: r-ir-pins { + pins = "PL6"; + function = "s_cir_rx"; };

- r_rsb_pins: r_rsb { - allwinner,pins = "PN0", "PN1"; - allwinner,function = "s_rsb"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + r_rsb_pins: r-rsb-pins { + pins = "PN0", "PN1"; + function = "s_rsb"; + drive-strength = <20>; + bias-pull-up; }; };

- r_rsb: i2c@08003400 { + r_rsb: i2c@8003400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x08003400 0x400>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; diff --git a/include/dt-bindings/clock/sun9i-a80-ccu.h b/include/dt-bindings/clock/sun9i-a80-ccu.h new file mode 100644 index 0000000000..6ea1492a73 --- /dev/null +++ b/include/dt-bindings/clock/sun9i-a80-ccu.h @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai wens@csie.org + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLOCK_SUN9I_A80_CCU_H_ +#define _DT_BINDINGS_CLOCK_SUN9I_A80_CCU_H_ + +#define CLK_PLL_AUDIO 2 +#define CLK_PLL_PERIPH0 3 + +#define CLK_C0CPUX 12 +#define CLK_C1CPUX 13 + +#define CLK_OUT_A 27 +#define CLK_OUT_B 28 + +#define CLK_NAND0_0 29 +#define CLK_NAND0_1 30 +#define CLK_NAND1_0 31 +#define CLK_NAND1_1 32 +#define CLK_MMC0 33 +#define CLK_MMC0_SAMPLE 34 +#define CLK_MMC0_OUTPUT 35 +#define CLK_MMC1 36 +#define CLK_MMC1_SAMPLE 37 +#define CLK_MMC1_OUTPUT 38 +#define CLK_MMC2 39 +#define CLK_MMC2_SAMPLE 40 +#define CLK_MMC2_OUTPUT 41 +#define CLK_MMC3 42 +#define CLK_MMC3_SAMPLE 43 +#define CLK_MMC3_OUTPUT 44 +#define CLK_TS 45 +#define CLK_SS 46 +#define CLK_SPI0 47 +#define CLK_SPI1 48 +#define CLK_SPI2 49 +#define CLK_SPI3 50 +#define CLK_I2S0 51 +#define CLK_I2S1 52 +#define CLK_SPDIF 53 +#define CLK_SDRAM 54 +#define CLK_DE 55 +#define CLK_EDP 56 +#define CLK_MP 57 +#define CLK_LCD0 58 +#define CLK_LCD1 59 +#define CLK_MIPI_DSI0 60 +#define CLK_MIPI_DSI1 61 +#define CLK_HDMI 62 +#define CLK_HDMI_SLOW 63 +#define CLK_MIPI_CSI 64 +#define CLK_CSI_ISP 65 +#define CLK_CSI_MISC 66 +#define CLK_CSI0_MCLK 67 +#define CLK_CSI1_MCLK 68 +#define CLK_FD 69 +#define CLK_VE 70 +#define CLK_AVS 71 +#define CLK_GPU_CORE 72 +#define CLK_GPU_MEMORY 73 +#define CLK_GPU_AXI 74 +#define CLK_SATA 75 +#define CLK_AC97 76 +#define CLK_MIPI_HSI 77 +#define CLK_GPADC 78 +#define CLK_CIR_TX 79 + +#define CLK_BUS_FD 80 +#define CLK_BUS_VE 81 +#define CLK_BUS_GPU_CTRL 82 +#define CLK_BUS_SS 83 +#define CLK_BUS_MMC 84 +#define CLK_BUS_NAND0 85 +#define CLK_BUS_NAND1 86 +#define CLK_BUS_SDRAM 87 +#define CLK_BUS_MIPI_HSI 88 +#define CLK_BUS_SATA 89 +#define CLK_BUS_TS 90 +#define CLK_BUS_SPI0 91 +#define CLK_BUS_SPI1 92 +#define CLK_BUS_SPI2 93 +#define CLK_BUS_SPI3 94 + +#define CLK_BUS_OTG 95 +#define CLK_BUS_USB 96 +#define CLK_BUS_GMAC 97 +#define CLK_BUS_MSGBOX 98 +#define CLK_BUS_SPINLOCK 99 +#define CLK_BUS_HSTIMER 100 +#define CLK_BUS_DMA 101 + +#define CLK_BUS_LCD0 102 +#define CLK_BUS_LCD1 103 +#define CLK_BUS_EDP 104 +#define CLK_BUS_CSI 105 +#define CLK_BUS_HDMI 106 +#define CLK_BUS_DE 107 +#define CLK_BUS_MP 108 +#define CLK_BUS_MIPI_DSI 109 + +#define CLK_BUS_SPDIF 110 +#define CLK_BUS_PIO 111 +#define CLK_BUS_AC97 112 +#define CLK_BUS_I2S0 113 +#define CLK_BUS_I2S1 114 +#define CLK_BUS_LRADC 115 +#define CLK_BUS_GPADC 116 +#define CLK_BUS_TWD 117 +#define CLK_BUS_CIR_TX 118 + +#define CLK_BUS_I2C0 119 +#define CLK_BUS_I2C1 120 +#define CLK_BUS_I2C2 121 +#define CLK_BUS_I2C3 122 +#define CLK_BUS_I2C4 123 +#define CLK_BUS_UART0 124 +#define CLK_BUS_UART1 125 +#define CLK_BUS_UART2 126 +#define CLK_BUS_UART3 127 +#define CLK_BUS_UART4 128 +#define CLK_BUS_UART5 129 + +#endif /* _DT_BINDINGS_CLOCK_SUN9I_A80_CCU_H_ */ diff --git a/include/dt-bindings/clock/sun9i-a80-de.h b/include/dt-bindings/clock/sun9i-a80-de.h new file mode 100644 index 0000000000..3dad6c3cd1 --- /dev/null +++ b/include/dt-bindings/clock/sun9i-a80-de.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai wens@csie.org + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_ +#define _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_ + +#define CLK_FE0 0 +#define CLK_FE1 1 +#define CLK_FE2 2 +#define CLK_IEP_DEU0 3 +#define CLK_IEP_DEU1 4 +#define CLK_BE0 5 +#define CLK_BE1 6 +#define CLK_BE2 7 +#define CLK_IEP_DRC0 8 +#define CLK_IEP_DRC1 9 +#define CLK_MERGE 10 + +#define CLK_DRAM_FE0 11 +#define CLK_DRAM_FE1 12 +#define CLK_DRAM_FE2 13 +#define CLK_DRAM_DEU0 14 +#define CLK_DRAM_DEU1 15 +#define CLK_DRAM_BE0 16 +#define CLK_DRAM_BE1 17 +#define CLK_DRAM_BE2 18 +#define CLK_DRAM_DRC0 19 +#define CLK_DRAM_DRC1 20 + +#define CLK_BUS_FE0 21 +#define CLK_BUS_FE1 22 +#define CLK_BUS_FE2 23 +#define CLK_BUS_DEU0 24 +#define CLK_BUS_DEU1 25 +#define CLK_BUS_BE0 26 +#define CLK_BUS_BE1 27 +#define CLK_BUS_BE2 28 +#define CLK_BUS_DRC0 29 +#define CLK_BUS_DRC1 30 + +#endif /* _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_ */ diff --git a/include/dt-bindings/clock/sun9i-a80-usb.h b/include/dt-bindings/clock/sun9i-a80-usb.h new file mode 100644 index 0000000000..783a60d2cc --- /dev/null +++ b/include/dt-bindings/clock/sun9i-a80-usb.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai wens@csie.org + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLOCK_SUN9I_A80_USB_H_ +#define _DT_BINDINGS_CLOCK_SUN9I_A80_USB_H_ + +#define CLK_BUS_HCI0 0 +#define CLK_USB_OHCI0 1 +#define CLK_BUS_HCI1 2 +#define CLK_BUS_HCI2 3 +#define CLK_USB_OHCI2 4 + +#define CLK_USB0_PHY 5 +#define CLK_USB1_HSIC 6 +#define CLK_USB1_PHY 7 +#define CLK_USB2_HSIC 8 +#define CLK_USB2_PHY 9 +#define CLK_USB_HSIC 10 + +#endif /* _DT_BINDINGS_CLOCK_SUN9I_A80_USB_H_ */ diff --git a/include/dt-bindings/reset/sun9i-a80-ccu.h b/include/dt-bindings/reset/sun9i-a80-ccu.h new file mode 100644 index 0000000000..4b8df4b367 --- /dev/null +++ b/include/dt-bindings/reset/sun9i-a80-ccu.h @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai wens@csie.org + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RESET_SUN9I_A80_CCU_H_ +#define _DT_BINDINGS_RESET_SUN9I_A80_CCU_H_ + +#define RST_BUS_FD 0 +#define RST_BUS_VE 1 +#define RST_BUS_GPU_CTRL 2 +#define RST_BUS_SS 3 +#define RST_BUS_MMC 4 +#define RST_BUS_NAND0 5 +#define RST_BUS_NAND1 6 +#define RST_BUS_SDRAM 7 +#define RST_BUS_SATA 8 +#define RST_BUS_TS 9 +#define RST_BUS_SPI0 10 +#define RST_BUS_SPI1 11 +#define RST_BUS_SPI2 12 +#define RST_BUS_SPI3 13 + +#define RST_BUS_OTG 14 +#define RST_BUS_OTG_PHY 15 +#define RST_BUS_MIPI_HSI 16 +#define RST_BUS_GMAC 17 +#define RST_BUS_MSGBOX 18 +#define RST_BUS_SPINLOCK 19 +#define RST_BUS_HSTIMER 20 +#define RST_BUS_DMA 21 + +#define RST_BUS_LCD0 22 +#define RST_BUS_LCD1 23 +#define RST_BUS_EDP 24 +#define RST_BUS_LVDS 25 +#define RST_BUS_CSI 26 +#define RST_BUS_HDMI0 27 +#define RST_BUS_HDMI1 28 +#define RST_BUS_DE 29 +#define RST_BUS_MP 30 +#define RST_BUS_GPU 31 +#define RST_BUS_MIPI_DSI 32 + +#define RST_BUS_SPDIF 33 +#define RST_BUS_AC97 34 +#define RST_BUS_I2S0 35 +#define RST_BUS_I2S1 36 +#define RST_BUS_LRADC 37 +#define RST_BUS_GPADC 38 +#define RST_BUS_CIR_TX 39 + +#define RST_BUS_I2C0 40 +#define RST_BUS_I2C1 41 +#define RST_BUS_I2C2 42 +#define RST_BUS_I2C3 43 +#define RST_BUS_I2C4 44 +#define RST_BUS_UART0 45 +#define RST_BUS_UART1 46 +#define RST_BUS_UART2 47 +#define RST_BUS_UART3 48 +#define RST_BUS_UART4 49 +#define RST_BUS_UART5 50 + +#endif /* _DT_BINDINGS_RESET_SUN9I_A80_CCU_H_ */ diff --git a/include/dt-bindings/reset/sun9i-a80-de.h b/include/dt-bindings/reset/sun9i-a80-de.h new file mode 100644 index 0000000000..2050727701 --- /dev/null +++ b/include/dt-bindings/reset/sun9i-a80-de.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai wens@csie.org + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RESET_SUN9I_A80_DE_H_ +#define _DT_BINDINGS_RESET_SUN9I_A80_DE_H_ + +#define RST_FE0 0 +#define RST_FE1 1 +#define RST_FE2 2 +#define RST_DEU0 3 +#define RST_DEU1 4 +#define RST_BE0 5 +#define RST_BE1 6 +#define RST_BE2 7 +#define RST_DRC0 8 +#define RST_DRC1 9 +#define RST_MERGE 10 + +#endif /* _DT_BINDINGS_RESET_SUN9I_A80_DE_H_ */ diff --git a/include/dt-bindings/reset/sun9i-a80-usb.h b/include/dt-bindings/reset/sun9i-a80-usb.h new file mode 100644 index 0000000000..ee492864c2 --- /dev/null +++ b/include/dt-bindings/reset/sun9i-a80-usb.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai wens@csie.org + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RESET_SUN9I_A80_USB_H_ +#define _DT_BINDINGS_RESET_SUN9I_A80_USB_H_ + +#define RST_USB0_HCI 0 +#define RST_USB1_HCI 1 +#define RST_USB2_HCI 2 + +#define RST_USB0_PHY 3 +#define RST_USB1_HSIC 4 +#define RST_USB1_PHY 5 +#define RST_USB2_HSIC 6 +#define RST_USB2_PHY 7 + +#endif /* _DT_BINDINGS_RESET_SUN9I_A80_USB_H_ */