[U-Boot] [PATCH] Enable console log from earlyconsole in Linux bootargs

Remove 115200 from "earlycon" to avoid loss of initial log messages during linux kernel 4.1 bootup
Signed-off-by: Pratiyush Mohan Srivastava pratiyush.srivastava@freescale.com --- include/configs/ls2080a_common.h | 2 +- include/configs/ls2080ardb.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 31f6441..c39e294 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -263,7 +263,7 @@ unsigned long long get_qixis_addr(void); "console=ttyAMA0,38400n8\0"
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ - "earlycon=uart8250,mmio,0x21c0500,115200 " \ + "earlycon=uart8250,mmio,0x21c0500" \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ " hugepagesz=2m hugepages=16" #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 69bac8b..23d121a 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -314,7 +314,7 @@ unsigned long get_board_sys_clk(void);
#undef CONFIG_BOOTARGS #define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \ - "earlycon=uart8250,mmio,0x21c0600,115200 " \ + "earlycon=uart8250,mmio,0x21c0600" \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ " hugepagesz=2m hugepages=16"

On 10/31/2015 03:20 AM, Pratiyush Mohan Srivastava wrote:
Remove 115200 from "earlycon" to avoid loss of initial log messages during linux kernel 4.1 bootup
Signed-off-by: Pratiyush Mohan Srivastava pratiyush.srivastava@freescale.com
include/configs/ls2080a_common.h | 2 +- include/configs/ls2080ardb.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 31f6441..c39e294 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -263,7 +263,7 @@ unsigned long long get_qixis_addr(void); "console=ttyAMA0,38400n8\0"
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0500,115200 " \
"earlycon=uart8250,mmio,0x21c0500" \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ " hugepagesz=2m hugepages=16"
#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 69bac8b..23d121a 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -314,7 +314,7 @@ unsigned long get_board_sys_clk(void);
#undef CONFIG_BOOTARGS #define CONFIG_BOOTARGS "console=ttyS1,115200 root=/dev/ram0 " \
"earlycon=uart8250,mmio,0x21c0600,115200 " \
"earlycon=uart8250,mmio,0x21c0600" \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ " hugepagesz=2m hugepages=16"
This has no negative effect on 4.0 and 3.x kernel, does it? I didn't notice the message difference for 4.0.4.
York

On 10/31/2015 06:20 PM, Pratiyush Mohan Srivastava wrote:
Remove 115200 from "earlycon" to avoid loss of initial log messages during linux kernel 4.1 bootup
Signed-off-by: Pratiyush Mohan Srivastava pratiyush.srivastava@freescale.com
Applied to fsl-qoriq master. Awaiting upstream.
York
participants (2)
-
Pratiyush Mohan Srivastava
-
York Sun