hello,all I'm new to u-boot, now I am working on MPC8541, I use DUART1 as my serial port, I want to do loopback test on DUART1, but it isn't working, so I want to know how to do loopback test on DUART1.Can you help me? below is my processing steps: 1) set UCLR1=0x00 (close DLAB) 2) set UIER1=0x00 (disable interrupt) 3) set UMCR1=0x12 (allow loopback) 4) set UTHR1=0x5a (sending a char) 5) get the loopback value from URBR1 (but I always get value 0) best regards leo

------------------------------------------------------------------- 每天一晒每天一个幸运儿,你的梦想KFC来买单( http://d1.sina.com.cn/sina/limeng3/mail_zhuiyu/2008/mail_zhuiyu_20080205.htm... )

=================================================================== 注册新浪2G免费邮箱（http://mail.sina.com.cn/%EF%BC%89