Dear Wang Cheng,

in message 47429467b4.467b447429@rails.com.cn you wrote:

Thank you . I'm porting U-Boot to the WindRiver MDP8xx PRO board.Now I think I should run the U-Boot on my board in the simpliest way, so I just configed the necessary devices like FLASH ,DRAM . I can provide anything I have ,and thank you very very much .The include/configs/windriver.h and board/windrive/windriver.c have been included in the attachment.The MDP8xx PRO UM is too large to be attatched here.

So what do you expect?

You don't provide any information about the hardware, and some fragments of code - do you by any chance expect that now sombody volunteers and ports U-Boot to that board, based on zero information, and for free?

I'm afraid it doesn't work like that.

Please make yourself clear and tell us what you want: on this mailing list you can get free advice to solve specific problems etc., but if you are looking for someone who ports U-Boot to your board you will either have to do it yourself or ask for professional support (which is _not_ free).

Best regards,

Wolfgang Denk