Add i.MX8QXP pads definition

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- include/dt-bindings/pinctrl/pads-imx8qxp.h | 757 +++++++++++++++++++++++++++++ 1 file changed, 757 insertions(+) create mode 100644 include/dt-bindings/pinctrl/pads-imx8qxp.h

diff --git a/include/dt-bindings/pinctrl/pads-imx8qxp.h b/include/dt-bindings/pinctrl/pads-imx8qxp.h new file mode 100644 index 0000000000..41f4fe564c --- /dev/null +++ b/include/dt-bindings/pinctrl/pads-imx8qxp.h @@ -0,0 +1,757 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef _SC_PADS_H +#define _SC_PADS_H + +#define SC_P_PCIE_CTRL0_PERST_B 0 /* HSIO.PCIE0.PERST_B, LSIO.GPIO4.IO00 */ +#define SC_P_PCIE_CTRL0_CLKREQ_B 1 /* HSIO.PCIE0.CLKREQ_B, LSIO.GPIO4.IO01 */ +#define SC_P_PCIE_CTRL0_WAKE_B 2 /* HSIO.PCIE0.WAKE_B, LSIO.GPIO4.IO02 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_PCIESEP 3 /* */ +#define SC_P_USB_SS3_TC0 4 /* ADMA.I2C1.SCL, CONN.USB_OTG1.PWR, CONN.USB_OTG2.PWR, LSIO.GPIO4.IO03 */ +#define SC_P_USB_SS3_TC1 5 /* ADMA.I2C1.SCL, CONN.USB_OTG2.PWR, LSIO.GPIO4.IO04 */ +#define SC_P_USB_SS3_TC2 6 /* ADMA.I2C1.SDA, CONN.USB_OTG1.OC, CONN.USB_OTG2.OC, LSIO.GPIO4.IO05 */ +#define SC_P_USB_SS3_TC3 7 /* ADMA.I2C1.SDA, CONN.USB_OTG2.OC, LSIO.GPIO4.IO06 */ +#define SC_P_COMP_CTL_GPIO_3V3_USB3IO 8 /* */ +#define SC_P_EMMC0_CLK 9 /* CONN.EMMC0.CLK, CONN.NAND.READY_B, LSIO.GPIO4.IO07 */ +#define SC_P_EMMC0_CMD 10 /* CONN.EMMC0.CMD, CONN.NAND.DQS, LSIO.GPIO4.IO08 */ +#define SC_P_EMMC0_DATA0 11 /* CONN.EMMC0.DATA0, CONN.NAND.DATA00, LSIO.GPIO4.IO09 */ +#define SC_P_EMMC0_DATA1 12 /* CONN.EMMC0.DATA1, CONN.NAND.DATA01, LSIO.GPIO4.IO10 */ +#define SC_P_EMMC0_DATA2 13 /* CONN.EMMC0.DATA2, CONN.NAND.DATA02, LSIO.GPIO4.IO11 */ +#define SC_P_EMMC0_DATA3 14 /* CONN.EMMC0.DATA3, CONN.NAND.DATA03, LSIO.GPIO4.IO12 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_SD1FIX0 15 /* */ +#define SC_P_EMMC0_DATA4 16 /* CONN.EMMC0.DATA4, CONN.NAND.DATA04, CONN.EMMC0.WP, LSIO.GPIO4.IO13 */ +#define SC_P_EMMC0_DATA5 17 /* CONN.EMMC0.DATA5, CONN.NAND.DATA05, CONN.EMMC0.VSELECT, LSIO.GPIO4.IO14 */ +#define SC_P_EMMC0_DATA6 18 /* CONN.EMMC0.DATA6, CONN.NAND.DATA06, CONN.MLB.CLK, LSIO.GPIO4.IO15 */ +#define SC_P_EMMC0_DATA7 19 /* CONN.EMMC0.DATA7, CONN.NAND.DATA07, CONN.MLB.SIG, LSIO.GPIO4.IO16 */ +#define SC_P_EMMC0_STROBE 20 /* CONN.EMMC0.STROBE, CONN.NAND.CLE, CONN.MLB.DATA, LSIO.GPIO4.IO17 */ +#define SC_P_EMMC0_RESET_B 21 /* CONN.EMMC0.RESET_B, CONN.NAND.WP_B, LSIO.GPIO4.IO18 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_SD1FIX1 22 /* */ +#define SC_P_USDHC1_RESET_B 23 /* CONN.USDHC1.RESET_B, CONN.NAND.RE_N, ADMA.SPI2.SCK, LSIO.GPIO4.IO19 */ +#define SC_P_USDHC1_VSELECT 24 /* CONN.USDHC1.VSELECT, CONN.NAND.RE_P, ADMA.SPI2.SDO, CONN.NAND.RE_B, LSIO.GPIO4.IO20 */ +#define SC_P_CTL_NAND_RE_P_N 25 /* */ +#define SC_P_USDHC1_WP 26 /* CONN.USDHC1.WP, CONN.NAND.DQS_N, ADMA.SPI2.SDI, LSIO.GPIO4.IO21 */ +#define SC_P_USDHC1_CD_B 27 /* CONN.USDHC1.CD_B, CONN.NAND.DQS_P, ADMA.SPI2.CS0, CONN.NAND.DQS, LSIO.GPIO4.IO22 */ +#define SC_P_CTL_NAND_DQS_P_N 28 /* */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_VSELSEP 29 /* */ +#define SC_P_USDHC1_CLK 30 /* CONN.USDHC1.CLK, ADMA.UART3.RX, LSIO.GPIO4.IO23 */ +#define SC_P_USDHC1_CMD 31 /* CONN.USDHC1.CMD, CONN.NAND.CE0_B, ADMA.MQS.R, LSIO.GPIO4.IO24 */ +#define SC_P_USDHC1_DATA0 32 /* CONN.USDHC1.DATA0, CONN.NAND.CE1_B, ADMA.MQS.L, LSIO.GPIO4.IO25 */ +#define SC_P_USDHC1_DATA1 33 /* CONN.USDHC1.DATA1, CONN.NAND.RE_B, ADMA.UART3.TX, LSIO.GPIO4.IO26 */ +#define SC_P_USDHC1_DATA2 34 /* CONN.USDHC1.DATA2, CONN.NAND.WE_B, ADMA.UART3.CTS_B, LSIO.GPIO4.IO27 */ +#define SC_P_USDHC1_DATA3 35 /* CONN.USDHC1.DATA3, CONN.NAND.ALE, ADMA.UART3.RTS_B, LSIO.GPIO4.IO28 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_VSEL3 36 /* */ +#define SC_P_ENET0_RGMII_TXC 37 /* CONN.ENET0.RGMII_TXC, CONN.ENET0.RCLK50M_OUT, CONN.ENET0.RCLK50M_IN, CONN.NAND.CE1_B, LSIO.GPIO4.IO29 */ +#define SC_P_ENET0_RGMII_TX_CTL 38 /* CONN.ENET0.RGMII_TX_CTL, CONN.USDHC1.RESET_B, LSIO.GPIO4.IO30 */ +#define SC_P_ENET0_RGMII_TXD0 39 /* CONN.ENET0.RGMII_TXD0, CONN.USDHC1.VSELECT, LSIO.GPIO4.IO31 */ +#define SC_P_ENET0_RGMII_TXD1 40 /* CONN.ENET0.RGMII_TXD1, CONN.USDHC1.WP, LSIO.GPIO5.IO00 */ +#define SC_P_ENET0_RGMII_TXD2 41 /* CONN.ENET0.RGMII_TXD2, CONN.MLB.CLK, CONN.NAND.CE0_B, CONN.USDHC1.CD_B, LSIO.GPIO5.IO01 */ +#define SC_P_ENET0_RGMII_TXD3 42 /* CONN.ENET0.RGMII_TXD3, CONN.MLB.SIG, CONN.NAND.RE_B, LSIO.GPIO5.IO02 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0 43 /* */ +#define SC_P_ENET0_RGMII_RXC 44 /* CONN.ENET0.RGMII_RXC, CONN.MLB.DATA, CONN.NAND.WE_B, CONN.USDHC1.CLK, LSIO.GPIO5.IO03 */ +#define SC_P_ENET0_RGMII_RX_CTL 45 /* CONN.ENET0.RGMII_RX_CTL, CONN.USDHC1.CMD, LSIO.GPIO5.IO04 */ +#define SC_P_ENET0_RGMII_RXD0 46 /* CONN.ENET0.RGMII_RXD0, CONN.USDHC1.DATA0, LSIO.GPIO5.IO05 */ +#define SC_P_ENET0_RGMII_RXD1 47 /* CONN.ENET0.RGMII_RXD1, CONN.USDHC1.DATA1, LSIO.GPIO5.IO06 */ +#define SC_P_ENET0_RGMII_RXD2 48 /* CONN.ENET0.RGMII_RXD2, CONN.ENET0.RMII_RX_ER, CONN.USDHC1.DATA2, LSIO.GPIO5.IO07 */ +#define SC_P_ENET0_RGMII_RXD3 49 /* CONN.ENET0.RGMII_RXD3, CONN.NAND.ALE, CONN.USDHC1.DATA3, LSIO.GPIO5.IO08 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1 50 /* */ +#define SC_P_ENET0_REFCLK_125M_25M 51 /* CONN.ENET0.REFCLK_125M_25M, CONN.ENET0.PPS, CONN.ENET1.PPS, LSIO.GPIO5.IO09 */ +#define SC_P_ENET0_MDIO 52 /* CONN.ENET0.MDIO, ADMA.I2C3.SDA, CONN.ENET1.MDIO, LSIO.GPIO5.IO10 */ +#define SC_P_ENET0_MDC 53 /* CONN.ENET0.MDC, ADMA.I2C3.SCL, CONN.ENET1.MDC, LSIO.GPIO5.IO11 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIOCT 54 /* */ +#define SC_P_ESAI0_FSR 55 /* ADMA.ESAI0.FSR, CONN.ENET1.RCLK50M_OUT, ADMA.LCDIF.D00, CONN.ENET1.RGMII_TXC, CONN.ENET1.RCLK50M_IN */ +#define SC_P_ESAI0_FST 56 /* ADMA.ESAI0.FST, CONN.MLB.CLK, ADMA.LCDIF.D01, CONN.ENET1.RGMII_TXD2, LSIO.GPIO0.IO01 */ +#define SC_P_ESAI0_SCKR 57 /* ADMA.ESAI0.SCKR, ADMA.LCDIF.D02, CONN.ENET1.RGMII_TX_CTL, LSIO.GPIO0.IO02 */ +#define SC_P_ESAI0_SCKT 58 /* ADMA.ESAI0.SCKT, CONN.MLB.SIG, ADMA.LCDIF.D03, CONN.ENET1.RGMII_TXD3, LSIO.GPIO0.IO03 */ +#define SC_P_ESAI0_TX0 59 /* ADMA.ESAI0.TX0, CONN.MLB.DATA, ADMA.LCDIF.D04, CONN.ENET1.RGMII_RXC, LSIO.GPIO0.IO04 */ +#define SC_P_ESAI0_TX1 60 /* ADMA.ESAI0.TX1, ADMA.LCDIF.D05, CONN.ENET1.RGMII_RXD3, LSIO.GPIO0.IO05 */ +#define SC_P_ESAI0_TX2_RX3 61 /* ADMA.ESAI0.TX2_RX3, CONN.ENET1.RMII_RX_ER, ADMA.LCDIF.D06, CONN.ENET1.RGMII_RXD2, LSIO.GPIO0.IO06 */ +#define SC_P_ESAI0_TX3_RX2 62 /* ADMA.ESAI0.TX3_RX2, ADMA.LCDIF.D07, CONN.ENET1.RGMII_RXD1, LSIO.GPIO0.IO07 */ +#define SC_P_ESAI0_TX4_RX1 63 /* ADMA.ESAI0.TX4_RX1, ADMA.LCDIF.D08, CONN.ENET1.RGMII_TXD0, LSIO.GPIO0.IO08 */ +#define SC_P_ESAI0_TX5_RX0 64 /* ADMA.ESAI0.TX5_RX0, ADMA.LCDIF.D09, CONN.ENET1.RGMII_TXD1, LSIO.GPIO0.IO09 */ +#define SC_P_SPDIF0_RX 65 /* ADMA.SPDIF0.RX, ADMA.MQS.R, ADMA.LCDIF.D10, CONN.ENET1.RGMII_RXD0, LSIO.GPIO0.IO10 */ +#define SC_P_SPDIF0_TX 66 /* ADMA.SPDIF0.TX, ADMA.MQS.L, ADMA.LCDIF.D11, CONN.ENET1.RGMII_RX_CTL, LSIO.GPIO0.IO11 */ +#define SC_P_SPDIF0_EXT_CLK 67 /* ADMA.SPDIF0.EXT_CLK, ADMA.LCDIF.D12, CONN.ENET1.REFCLK_125M_25M, LSIO.GPIO0.IO12 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB 68 /* */ +#define SC_P_SPI3_SCK 69 /* ADMA.SPI3.SCK, ADMA.LCDIF.D13, LSIO.GPIO0.IO13 */ +#define SC_P_SPI3_SDO 70 /* ADMA.SPI3.SDO, ADMA.LCDIF.D14, LSIO.GPIO0.IO14 */ +#define SC_P_SPI3_SDI 71 /* ADMA.SPI3.SDI, ADMA.LCDIF.D15, LSIO.GPIO0.IO15 */ +#define SC_P_SPI3_CS0 72 /* ADMA.SPI3.CS0, ADMA.ACM.MCLK_OUT1, ADMA.LCDIF.HSYNC, LSIO.GPIO0.IO16 */ +#define SC_P_SPI3_CS1 73 /* ADMA.SPI3.CS1, ADMA.I2C3.SCL, ADMA.LCDIF.RESET, ADMA.SPI2.CS0, ADMA.LCDIF.D16 */ +#define SC_P_MCLK_IN1 74 /* ADMA.ACM.MCLK_IN1, ADMA.I2C3.SDA, ADMA.LCDIF.EN, ADMA.SPI2.SCK, ADMA.LCDIF.D17 */ +#define SC_P_MCLK_IN0 75 /* ADMA.ACM.MCLK_IN0, ADMA.ESAI0.RX_HF_CLK, ADMA.LCDIF.VSYNC, ADMA.SPI2.SDI, LSIO.GPIO0.IO19 */ +#define SC_P_MCLK_OUT0 76 /* ADMA.ACM.MCLK_OUT0, ADMA.ESAI0.TX_HF_CLK, ADMA.LCDIF.CLK, ADMA.SPI2.SDO, LSIO.GPIO0.IO20 */ +#define SC_P_UART1_TX 77 /* ADMA.UART1.TX, LSIO.PWM0.OUT, LSIO.GPT0.CAPTURE, LSIO.GPIO0.IO21 */ +#define SC_P_UART1_RX 78 /* ADMA.UART1.RX, LSIO.PWM1.OUT, LSIO.GPT0.COMPARE, LSIO.GPT1.CLK, LSIO.GPIO0.IO22 */ +#define SC_P_UART1_RTS_B 79 /* ADMA.UART1.RTS_B, LSIO.PWM2.OUT, ADMA.LCDIF.D16, LSIO.GPT1.CAPTURE, LSIO.GPT0.CLK */ +#define SC_P_UART1_CTS_B 80 /* ADMA.UART1.CTS_B, LSIO.PWM3.OUT, ADMA.LCDIF.D17, LSIO.GPT1.COMPARE, LSIO.GPIO0.IO24 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHK 81 /* */ +#define SC_P_SAI0_TXD 82 /* ADMA.SAI0.TXD, ADMA.SAI1.RXC, ADMA.SPI1.SDO, ADMA.LCDIF.D18, LSIO.GPIO0.IO25 */ +#define SC_P_SAI0_TXC 83 /* ADMA.SAI0.TXC, ADMA.SAI1.TXD, ADMA.SPI1.SDI, ADMA.LCDIF.D19, LSIO.GPIO0.IO26 */ +#define SC_P_SAI0_RXD 84 /* ADMA.SAI0.RXD, ADMA.SAI1.RXFS, ADMA.SPI1.CS0, ADMA.LCDIF.D20, LSIO.GPIO0.IO27 */ +#define SC_P_SAI0_TXFS 85 /* ADMA.SAI0.TXFS, ADMA.SPI2.CS1, ADMA.SPI1.SCK, LSIO.GPIO0.IO28 */ +#define SC_P_SAI1_RXD 86 /* ADMA.SAI1.RXD, ADMA.SAI0.RXFS, ADMA.SPI1.CS1, ADMA.LCDIF.D21, LSIO.GPIO0.IO29 */ +#define SC_P_SAI1_RXC 87 /* ADMA.SAI1.RXC, ADMA.SAI1.TXC, ADMA.LCDIF.D22, LSIO.GPIO0.IO30 */ +#define SC_P_SAI1_RXFS 88 /* ADMA.SAI1.RXFS, ADMA.SAI1.TXFS, ADMA.LCDIF.D23, LSIO.GPIO0.IO31 */ +#define SC_P_SPI2_CS0 89 /* ADMA.SPI2.CS0, LSIO.GPIO1.IO00 */ +#define SC_P_SPI2_SDO 90 /* ADMA.SPI2.SDO, LSIO.GPIO1.IO01 */ +#define SC_P_SPI2_SDI 91 /* ADMA.SPI2.SDI, LSIO.GPIO1.IO02 */ +#define SC_P_SPI2_SCK 92 /* ADMA.SPI2.SCK, LSIO.GPIO1.IO03 */ +#define SC_P_SPI0_SCK 93 /* ADMA.SPI0.SCK, ADMA.SAI0.TXC, M40.I2C0.SCL, M40.GPIO0.IO00, LSIO.GPIO1.IO04 */ +#define SC_P_SPI0_SDI 94 /* ADMA.SPI0.SDI, ADMA.SAI0.TXD, M40.TPM0.CH0, M40.GPIO0.IO02, LSIO.GPIO1.IO05 */ +#define SC_P_SPI0_SDO 95 /* ADMA.SPI0.SDO, ADMA.SAI0.TXFS, M40.I2C0.SDA, M40.GPIO0.IO01, LSIO.GPIO1.IO06 */ +#define SC_P_SPI0_CS1 96 /* ADMA.SPI0.CS1, ADMA.SAI0.RXC, ADMA.SAI1.TXD, ADMA.LCD_PWM0.OUT, LSIO.GPIO1.IO07 */ +#define SC_P_SPI0_CS0 97 /* ADMA.SPI0.CS0, ADMA.SAI0.RXD, M40.TPM0.CH1, M40.GPIO0.IO03, LSIO.GPIO1.IO08 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHT 98 /* */ +#define SC_P_ADC_IN1 99 /* ADMA.ADC.IN1, M40.I2C0.SDA, M40.GPIO0.IO01, LSIO.GPIO1.IO09 */ +#define SC_P_ADC_IN0 100 /* ADMA.ADC.IN0, M40.I2C0.SCL, M40.GPIO0.IO00, LSIO.GPIO1.IO10 */ +#define SC_P_ADC_IN3 101 /* ADMA.ADC.IN3, M40.UART0.TX, M40.GPIO0.IO03, ADMA.ACM.MCLK_OUT0, LSIO.GPIO1.IO11 */ +#define SC_P_ADC_IN2 102 /* ADMA.ADC.IN2, M40.UART0.RX, M40.GPIO0.IO02, ADMA.ACM.MCLK_IN0, LSIO.GPIO1.IO12 */ +#define SC_P_ADC_IN5 103 /* ADMA.ADC.IN5, M40.TPM0.CH1, M40.GPIO0.IO05, LSIO.GPIO1.IO13 */ +#define SC_P_ADC_IN4 104 /* ADMA.ADC.IN4, M40.TPM0.CH0, M40.GPIO0.IO04, LSIO.GPIO1.IO14 */ +#define SC_P_FLEXCAN0_RX 105 /* ADMA.FLEXCAN0.RX, ADMA.SAI2.RXC, ADMA.UART0.RTS_B, ADMA.SAI1.TXC, LSIO.GPIO1.IO15 */ +#define SC_P_FLEXCAN0_TX 106 /* ADMA.FLEXCAN0.TX, ADMA.SAI2.RXD, ADMA.UART0.CTS_B, ADMA.SAI1.TXFS, LSIO.GPIO1.IO16 */ +#define SC_P_FLEXCAN1_RX 107 /* ADMA.FLEXCAN1.RX, ADMA.SAI2.RXFS, ADMA.FTM.CH2, ADMA.SAI1.TXD, LSIO.GPIO1.IO17 */ +#define SC_P_FLEXCAN1_TX 108 /* ADMA.FLEXCAN1.TX, ADMA.SAI3.RXC, ADMA.DMA0.REQ_IN0, ADMA.SAI1.RXD, LSIO.GPIO1.IO18 */ +#define SC_P_FLEXCAN2_RX 109 /* ADMA.FLEXCAN2.RX, ADMA.SAI3.RXD, ADMA.UART3.RX, ADMA.SAI1.RXFS, LSIO.GPIO1.IO19 */ +#define SC_P_FLEXCAN2_TX 110 /* ADMA.FLEXCAN2.TX, ADMA.SAI3.RXFS, ADMA.UART3.TX, ADMA.SAI1.RXC, LSIO.GPIO1.IO20 */ +#define SC_P_UART0_RX 111 /* ADMA.UART0.RX, ADMA.MQS.R, ADMA.FLEXCAN0.RX, SCU.UART0.RX, LSIO.GPIO1.IO21 */ +#define SC_P_UART0_TX 112 /* ADMA.UART0.TX, ADMA.MQS.L, ADMA.FLEXCAN0.TX, SCU.UART0.TX, LSIO.GPIO1.IO22 */ +#define SC_P_UART2_TX 113 /* ADMA.UART2.TX, ADMA.FTM.CH1, ADMA.FLEXCAN1.TX, LSIO.GPIO1.IO23 */ +#define SC_P_UART2_RX 114 /* ADMA.UART2.RX, ADMA.FTM.CH0, ADMA.FLEXCAN1.RX, LSIO.GPIO1.IO24 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIOLH 115 /* */ +#define SC_P_MIPI_DSI0_I2C0_SCL 116 /* MIPI_DSI0.I2C0.SCL, MIPI_DSI1.GPIO0.IO02, LSIO.GPIO1.IO25 */ +#define SC_P_MIPI_DSI0_I2C0_SDA 117 /* MIPI_DSI0.I2C0.SDA, MIPI_DSI1.GPIO0.IO03, LSIO.GPIO1.IO26 */ +#define SC_P_MIPI_DSI0_GPIO0_00 118 /* MIPI_DSI0.GPIO0.IO00, ADMA.I2C1.SCL, MIPI_DSI0.PWM0.OUT, LSIO.GPIO1.IO27 */ +#define SC_P_MIPI_DSI0_GPIO0_01 119 /* MIPI_DSI0.GPIO0.IO01, ADMA.I2C1.SDA, LSIO.GPIO1.IO28 */ +#define SC_P_MIPI_DSI1_I2C0_SCL 120 /* MIPI_DSI1.I2C0.SCL, MIPI_DSI0.GPIO0.IO02, LSIO.GPIO1.IO29 */ +#define SC_P_MIPI_DSI1_I2C0_SDA 121 /* MIPI_DSI1.I2C0.SDA, MIPI_DSI0.GPIO0.IO03, LSIO.GPIO1.IO30 */ +#define SC_P_MIPI_DSI1_GPIO0_00 122 /* MIPI_DSI1.GPIO0.IO00, ADMA.I2C2.SCL, MIPI_DSI1.PWM0.OUT, LSIO.GPIO1.IO31 */ +#define SC_P_MIPI_DSI1_GPIO0_01 123 /* MIPI_DSI1.GPIO0.IO01, ADMA.I2C2.SDA, LSIO.GPIO2.IO00 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_MIPIDSIGPIO 124 /* */ +#define SC_P_JTAG_TRST_B 125 /* SCU.JTAG.TRST_B, SCU.WDOG0.WDOG_OUT */ +#define SC_P_PMIC_I2C_SCL 126 /* SCU.PMIC_I2C.SCL, SCU.GPIO0.IOXX_PMIC_A35_ON, LSIO.GPIO2.IO01 */ +#define SC_P_PMIC_I2C_SDA 127 /* SCU.PMIC_I2C.SDA, SCU.GPIO0.IOXX_PMIC_GPU_ON, LSIO.GPIO2.IO02 */ +#define SC_P_PMIC_INT_B 128 /* SCU.DSC.PMIC_INT_B */ +#define SC_P_SCU_GPIO0_00 129 /* SCU.GPIO0.IO00, SCU.UART0.RX, M40.UART0.RX, ADMA.UART3.RX, LSIO.GPIO2.IO03 */ +#define SC_P_SCU_GPIO0_01 130 /* SCU.GPIO0.IO01, SCU.UART0.TX, M40.UART0.TX, ADMA.UART3.TX, SCU.WDOG0.WDOG_OUT */ +#define SC_P_SCU_PMIC_STANDBY 131 /* SCU.DSC.PMIC_STANDBY */ +#define SC_P_SCU_BOOT_MODE0 132 /* SCU.DSC.BOOT_MODE0 */ +#define SC_P_SCU_BOOT_MODE1 133 /* SCU.DSC.BOOT_MODE1 */ +#define SC_P_SCU_BOOT_MODE2 134 /* SCU.DSC.BOOT_MODE2, SCU.PMIC_I2C.SDA */ +#define SC_P_SCU_BOOT_MODE3 135 /* SCU.DSC.BOOT_MODE3, SCU.PMIC_I2C.SCL, SCU.DSC.RTC_CLOCK_OUTPUT_32K */ +#define SC_P_CSI_D00 136 /* CI_PI.D02, ADMA.SAI0.RXC */ +#define SC_P_CSI_D01 137 /* CI_PI.D03, ADMA.SAI0.RXD */ +#define SC_P_CSI_D02 138 /* CI_PI.D04, ADMA.SAI0.RXFS */ +#define SC_P_CSI_D03 139 /* CI_PI.D05, ADMA.SAI2.RXC */ +#define SC_P_CSI_D04 140 /* CI_PI.D06, ADMA.SAI2.RXD */ +#define SC_P_CSI_D05 141 /* CI_PI.D07, ADMA.SAI2.RXFS */ +#define SC_P_CSI_D06 142 /* CI_PI.D08, ADMA.SAI3.RXC */ +#define SC_P_CSI_D07 143 /* CI_PI.D09, ADMA.SAI3.RXD */ +#define SC_P_CSI_HSYNC 144 /* CI_PI.HSYNC, CI_PI.D00, ADMA.SAI3.RXFS */ +#define SC_P_CSI_VSYNC 145 /* CI_PI.VSYNC, CI_PI.D01 */ +#define SC_P_CSI_PCLK 146 /* CI_PI.PCLK, MIPI_CSI0.I2C0.SCL, ADMA.SPI1.SCK, LSIO.GPIO3.IO00 */ +#define SC_P_CSI_MCLK 147 /* CI_PI.MCLK, MIPI_CSI0.I2C0.SDA, ADMA.SPI1.SDO, LSIO.GPIO3.IO01 */ +#define SC_P_CSI_EN 148 /* CI_PI.EN, CI_PI.I2C.SCL, ADMA.I2C3.SCL, ADMA.SPI1.SDI, LSIO.GPIO3.IO02 */ +#define SC_P_CSI_RESET 149 /* CI_PI.RESET, CI_PI.I2C.SDA, ADMA.I2C3.SDA, ADMA.SPI1.CS0, LSIO.GPIO3.IO03 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHD 150 /* */ +#define SC_P_MIPI_CSI0_MCLK_OUT 151 /* MIPI_CSI0.ACM.MCLK_OUT, LSIO.GPIO3.IO04 */ +#define SC_P_MIPI_CSI0_I2C0_SCL 152 /* MIPI_CSI0.I2C0.SCL, MIPI_CSI0.GPIO0.IO02, LSIO.GPIO3.IO05 */ +#define SC_P_MIPI_CSI0_I2C0_SDA 153 /* MIPI_CSI0.I2C0.SDA, MIPI_CSI0.GPIO0.IO03, LSIO.GPIO3.IO06 */ +#define SC_P_MIPI_CSI0_GPIO0_01 154 /* MIPI_CSI0.GPIO0.IO01, ADMA.I2C0.SDA, LSIO.GPIO3.IO07 */ +#define SC_P_MIPI_CSI0_GPIO0_00 155 /* MIPI_CSI0.GPIO0.IO00, ADMA.I2C0.SCL, LSIO.GPIO3.IO08 */ +#define SC_P_QSPI0A_DATA0 156 /* LSIO.QSPI0A.DATA0, LSIO.GPIO3.IO09 */ +#define SC_P_QSPI0A_DATA1 157 /* LSIO.QSPI0A.DATA1, LSIO.GPIO3.IO10 */ +#define SC_P_QSPI0A_DATA2 158 /* LSIO.QSPI0A.DATA2, LSIO.GPIO3.IO11 */ +#define SC_P_QSPI0A_DATA3 159 /* LSIO.QSPI0A.DATA3, LSIO.GPIO3.IO12 */ +#define SC_P_QSPI0A_DQS 160 /* LSIO.QSPI0A.DQS, LSIO.GPIO3.IO13 */ +#define SC_P_QSPI0A_SS0_B 161 /* LSIO.QSPI0A.SS0_B, LSIO.GPIO3.IO14 */ +#define SC_P_QSPI0A_SS1_B 162 /* LSIO.QSPI0A.SS1_B, LSIO.GPIO3.IO15 */ +#define SC_P_QSPI0A_SCLK 163 /* LSIO.QSPI0A.SCLK, LSIO.GPIO3.IO16 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_QSPI0A 164 /* */ +#define SC_P_QSPI0B_SCLK 165 /* LSIO.QSPI0B.SCLK, LSIO.QSPI1A.SCLK, LSIO.KPP0.COL0, LSIO.GPIO3.IO17 */ +#define SC_P_QSPI0B_DATA0 166 /* LSIO.QSPI0B.DATA0, LSIO.QSPI1A.DATA0, LSIO.KPP0.COL1, LSIO.GPIO3.IO18 */ +#define SC_P_QSPI0B_DATA1 167 /* LSIO.QSPI0B.DATA1, LSIO.QSPI1A.DATA1, LSIO.KPP0.COL2, LSIO.GPIO3.IO19 */ +#define SC_P_QSPI0B_DATA2 168 /* LSIO.QSPI0B.DATA2, LSIO.QSPI1A.DATA2, LSIO.KPP0.COL3, LSIO.GPIO3.IO20 */ +#define SC_P_QSPI0B_DATA3 169 /* LSIO.QSPI0B.DATA3, LSIO.QSPI1A.DATA3, LSIO.KPP0.ROW0, LSIO.GPIO3.IO21 */ +#define SC_P_QSPI0B_DQS 170 /* LSIO.QSPI0B.DQS, LSIO.QSPI1A.DQS, LSIO.KPP0.ROW1, LSIO.GPIO3.IO22 */ +#define SC_P_QSPI0B_SS0_B 171 /* LSIO.QSPI0B.SS0_B, LSIO.QSPI1A.SS0_B, LSIO.KPP0.ROW2, LSIO.GPIO3.IO23 */ +#define SC_P_QSPI0B_SS1_B 172 /* LSIO.QSPI0B.SS1_B, LSIO.QSPI1A.SS1_B, LSIO.KPP0.ROW3, LSIO.GPIO3.IO24 */ +#define SC_P_COMP_CTL_GPIO_1V8_3V3_QSPI0B 173 /* */ +/*@}*/ + +/*! + * @name Pad Mux Definitions + * format: name padid padmux + */ +/*@{*/ +#define SC_P_PCIE_CTRL0_PERST_B_HSIO_PCIE0_PERST_B SC_P_PCIE_CTRL0_PERST_B 0 +#define SC_P_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 SC_P_PCIE_CTRL0_PERST_B 4 +#define SC_P_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B SC_P_PCIE_CTRL0_CLKREQ_B 0 +#define SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 SC_P_PCIE_CTRL0_CLKREQ_B 4 +#define SC_P_PCIE_CTRL0_WAKE_B_HSIO_PCIE0_WAKE_B SC_P_PCIE_CTRL0_WAKE_B 0 +#define SC_P_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 SC_P_PCIE_CTRL0_WAKE_B 4 +#define SC_P_USB_SS3_TC0_ADMA_I2C1_SCL SC_P_USB_SS3_TC0 0 +#define SC_P_USB_SS3_TC0_CONN_USB_OTG1_PWR SC_P_USB_SS3_TC0 1 +#define SC_P_USB_SS3_TC0_CONN_USB_OTG2_PWR SC_P_USB_SS3_TC0 2 +#define SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 SC_P_USB_SS3_TC0 4 +#define SC_P_USB_SS3_TC1_ADMA_I2C1_SCL SC_P_USB_SS3_TC1 0 +#define SC_P_USB_SS3_TC1_CONN_USB_OTG2_PWR SC_P_USB_SS3_TC1 1 +#define SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 SC_P_USB_SS3_TC1 4 +#define SC_P_USB_SS3_TC2_ADMA_I2C1_SDA SC_P_USB_SS3_TC2 0 +#define SC_P_USB_SS3_TC2_CONN_USB_OTG1_OC SC_P_USB_SS3_TC2 1 +#define SC_P_USB_SS3_TC2_CONN_USB_OTG2_OC SC_P_USB_SS3_TC2 2 +#define SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05 SC_P_USB_SS3_TC2 4 +#define SC_P_USB_SS3_TC3_ADMA_I2C1_SDA SC_P_USB_SS3_TC3 0 +#define SC_P_USB_SS3_TC3_CONN_USB_OTG2_OC SC_P_USB_SS3_TC3 1 +#define SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06 SC_P_USB_SS3_TC3 4 +#define SC_P_EMMC0_CLK_CONN_EMMC0_CLK SC_P_EMMC0_CLK 0 +#define SC_P_EMMC0_CLK_CONN_NAND_READY_B SC_P_EMMC0_CLK 1 +#define SC_P_EMMC0_CLK_LSIO_GPIO4_IO07 SC_P_EMMC0_CLK 4 +#define SC_P_EMMC0_CMD_CONN_EMMC0_CMD SC_P_EMMC0_CMD 0 +#define SC_P_EMMC0_CMD_CONN_NAND_DQS SC_P_EMMC0_CMD 1 +#define SC_P_EMMC0_CMD_LSIO_GPIO4_IO08 SC_P_EMMC0_CMD 4 +#define SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 SC_P_EMMC0_DATA0 0 +#define SC_P_EMMC0_DATA0_CONN_NAND_DATA00 SC_P_EMMC0_DATA0 1 +#define SC_P_EMMC0_DATA0_LSIO_GPIO4_IO09 SC_P_EMMC0_DATA0 4 +#define SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 SC_P_EMMC0_DATA1 0 +#define SC_P_EMMC0_DATA1_CONN_NAND_DATA01 SC_P_EMMC0_DATA1 1 +#define SC_P_EMMC0_DATA1_LSIO_GPIO4_IO10 SC_P_EMMC0_DATA1 4 +#define SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 SC_P_EMMC0_DATA2 0 +#define SC_P_EMMC0_DATA2_CONN_NAND_DATA02 SC_P_EMMC0_DATA2 1 +#define SC_P_EMMC0_DATA2_LSIO_GPIO4_IO11 SC_P_EMMC0_DATA2 4 +#define SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 SC_P_EMMC0_DATA3 0 +#define SC_P_EMMC0_DATA3_CONN_NAND_DATA03 SC_P_EMMC0_DATA3 1 +#define SC_P_EMMC0_DATA3_LSIO_GPIO4_IO12 SC_P_EMMC0_DATA3 4 +#define SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 SC_P_EMMC0_DATA4 0 +#define SC_P_EMMC0_DATA4_CONN_NAND_DATA04 SC_P_EMMC0_DATA4 1 +#define SC_P_EMMC0_DATA4_CONN_EMMC0_WP SC_P_EMMC0_DATA4 3 +#define SC_P_EMMC0_DATA4_LSIO_GPIO4_IO13 SC_P_EMMC0_DATA4 4 +#define SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 SC_P_EMMC0_DATA5 0 +#define SC_P_EMMC0_DATA5_CONN_NAND_DATA05 SC_P_EMMC0_DATA5 1 +#define SC_P_EMMC0_DATA5_CONN_EMMC0_VSELECT SC_P_EMMC0_DATA5 3 +#define SC_P_EMMC0_DATA5_LSIO_GPIO4_IO14 SC_P_EMMC0_DATA5 4 +#define SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 SC_P_EMMC0_DATA6 0 +#define SC_P_EMMC0_DATA6_CONN_NAND_DATA06 SC_P_EMMC0_DATA6 1 +#define SC_P_EMMC0_DATA6_CONN_MLB_CLK SC_P_EMMC0_DATA6 3 +#define SC_P_EMMC0_DATA6_LSIO_GPIO4_IO15 SC_P_EMMC0_DATA6 4 +#define SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 SC_P_EMMC0_DATA7 0 +#define SC_P_EMMC0_DATA7_CONN_NAND_DATA07 SC_P_EMMC0_DATA7 1 +#define SC_P_EMMC0_DATA7_CONN_MLB_SIG SC_P_EMMC0_DATA7 3 +#define SC_P_EMMC0_DATA7_LSIO_GPIO4_IO16 SC_P_EMMC0_DATA7 4 +#define SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE SC_P_EMMC0_STROBE 0 +#define SC_P_EMMC0_STROBE_CONN_NAND_CLE SC_P_EMMC0_STROBE 1 +#define SC_P_EMMC0_STROBE_CONN_MLB_DATA SC_P_EMMC0_STROBE 3 +#define SC_P_EMMC0_STROBE_LSIO_GPIO4_IO17 SC_P_EMMC0_STROBE 4 +#define SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B SC_P_EMMC0_RESET_B 0 +#define SC_P_EMMC0_RESET_B_CONN_NAND_WP_B SC_P_EMMC0_RESET_B 1 +#define SC_P_EMMC0_RESET_B_LSIO_GPIO4_IO18 SC_P_EMMC0_RESET_B 4 +#define SC_P_USDHC1_RESET_B_CONN_USDHC1_RESET_B SC_P_USDHC1_RESET_B 0 +#define SC_P_USDHC1_RESET_B_CONN_NAND_RE_N SC_P_USDHC1_RESET_B 1 +#define SC_P_USDHC1_RESET_B_ADMA_SPI2_SCK SC_P_USDHC1_RESET_B 2 +#define SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO19 SC_P_USDHC1_RESET_B 4 +#define SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT SC_P_USDHC1_VSELECT 0 +#define SC_P_USDHC1_VSELECT_CONN_NAND_RE_P SC_P_USDHC1_VSELECT 1 +#define SC_P_USDHC1_VSELECT_ADMA_SPI2_SDO SC_P_USDHC1_VSELECT 2 +#define SC_P_USDHC1_VSELECT_CONN_NAND_RE_B SC_P_USDHC1_VSELECT 3 +#define SC_P_USDHC1_VSELECT_LSIO_GPIO4_IO20 SC_P_USDHC1_VSELECT 4 +#define SC_P_USDHC1_WP_CONN_USDHC1_WP SC_P_USDHC1_WP 0 +#define SC_P_USDHC1_WP_CONN_NAND_DQS_N SC_P_USDHC1_WP 1 +#define SC_P_USDHC1_WP_ADMA_SPI2_SDI SC_P_USDHC1_WP 2 +#define SC_P_USDHC1_WP_LSIO_GPIO4_IO21 SC_P_USDHC1_WP 4 +#define SC_P_USDHC1_CD_B_CONN_USDHC1_CD_B SC_P_USDHC1_CD_B 0 +#define SC_P_USDHC1_CD_B_CONN_NAND_DQS_P SC_P_USDHC1_CD_B 1 +#define SC_P_USDHC1_CD_B_ADMA_SPI2_CS0 SC_P_USDHC1_CD_B 2 +#define SC_P_USDHC1_CD_B_CONN_NAND_DQS SC_P_USDHC1_CD_B 3 +#define SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 SC_P_USDHC1_CD_B 4 +#define SC_P_USDHC1_CLK_CONN_USDHC1_CLK SC_P_USDHC1_CLK 0 +#define SC_P_USDHC1_CLK_ADMA_UART3_RX SC_P_USDHC1_CLK 2 +#define SC_P_USDHC1_CLK_LSIO_GPIO4_IO23 SC_P_USDHC1_CLK 4 +#define SC_P_USDHC1_CMD_CONN_USDHC1_CMD SC_P_USDHC1_CMD 0 +#define SC_P_USDHC1_CMD_CONN_NAND_CE0_B SC_P_USDHC1_CMD 1 +#define SC_P_USDHC1_CMD_ADMA_MQS_R SC_P_USDHC1_CMD 2 +#define SC_P_USDHC1_CMD_LSIO_GPIO4_IO24 SC_P_USDHC1_CMD 4 +#define SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 SC_P_USDHC1_DATA0 0 +#define SC_P_USDHC1_DATA0_CONN_NAND_CE1_B SC_P_USDHC1_DATA0 1 +#define SC_P_USDHC1_DATA0_ADMA_MQS_L SC_P_USDHC1_DATA0 2 +#define SC_P_USDHC1_DATA0_LSIO_GPIO4_IO25 SC_P_USDHC1_DATA0 4 +#define SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 SC_P_USDHC1_DATA1 0 +#define SC_P_USDHC1_DATA1_CONN_NAND_RE_B SC_P_USDHC1_DATA1 1 +#define SC_P_USDHC1_DATA1_ADMA_UART3_TX SC_P_USDHC1_DATA1 2 +#define SC_P_USDHC1_DATA1_LSIO_GPIO4_IO26 SC_P_USDHC1_DATA1 4 +#define SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 SC_P_USDHC1_DATA2 0 +#define SC_P_USDHC1_DATA2_CONN_NAND_WE_B SC_P_USDHC1_DATA2 1 +#define SC_P_USDHC1_DATA2_ADMA_UART3_CTS_B SC_P_USDHC1_DATA2 2 +#define SC_P_USDHC1_DATA2_LSIO_GPIO4_IO27 SC_P_USDHC1_DATA2 4 +#define SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 SC_P_USDHC1_DATA3 0 +#define SC_P_USDHC1_DATA3_CONN_NAND_ALE SC_P_USDHC1_DATA3 1 +#define SC_P_USDHC1_DATA3_ADMA_UART3_RTS_B SC_P_USDHC1_DATA3 2 +#define SC_P_USDHC1_DATA3_LSIO_GPIO4_IO28 SC_P_USDHC1_DATA3 4 +#define SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC SC_P_ENET0_RGMII_TXC 0 +#define SC_P_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT SC_P_ENET0_RGMII_TXC 1 +#define SC_P_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_IN SC_P_ENET0_RGMII_TXC 2 +#define SC_P_ENET0_RGMII_TXC_CONN_NAND_CE1_B SC_P_ENET0_RGMII_TXC 3 +#define SC_P_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 SC_P_ENET0_RGMII_TXC 4 +#define SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL SC_P_ENET0_RGMII_TX_CTL 0 +#define SC_P_ENET0_RGMII_TX_CTL_CONN_USDHC1_RESET_B SC_P_ENET0_RGMII_TX_CTL 3 +#define SC_P_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 SC_P_ENET0_RGMII_TX_CTL 4 +#define SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 SC_P_ENET0_RGMII_TXD0 0 +#define SC_P_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT SC_P_ENET0_RGMII_TXD0 3 +#define SC_P_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31 SC_P_ENET0_RGMII_TXD0 4 +#define SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 SC_P_ENET0_RGMII_TXD1 0 +#define SC_P_ENET0_RGMII_TXD1_CONN_USDHC1_WP SC_P_ENET0_RGMII_TXD1 3 +#define SC_P_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 SC_P_ENET0_RGMII_TXD1 4 +#define SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 SC_P_ENET0_RGMII_TXD2 0 +#define SC_P_ENET0_RGMII_TXD2_CONN_MLB_CLK SC_P_ENET0_RGMII_TXD2 1 +#define SC_P_ENET0_RGMII_TXD2_CONN_NAND_CE0_B SC_P_ENET0_RGMII_TXD2 2 +#define SC_P_ENET0_RGMII_TXD2_CONN_USDHC1_CD_B SC_P_ENET0_RGMII_TXD2 3 +#define SC_P_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 SC_P_ENET0_RGMII_TXD2 4 +#define SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 SC_P_ENET0_RGMII_TXD3 0 +#define SC_P_ENET0_RGMII_TXD3_CONN_MLB_SIG SC_P_ENET0_RGMII_TXD3 1 +#define SC_P_ENET0_RGMII_TXD3_CONN_NAND_RE_B SC_P_ENET0_RGMII_TXD3 2 +#define SC_P_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 SC_P_ENET0_RGMII_TXD3 4 +#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0 0 +#define SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC SC_P_ENET0_RGMII_RXC 0 +#define SC_P_ENET0_RGMII_RXC_CONN_MLB_DATA SC_P_ENET0_RGMII_RXC 1 +#define SC_P_ENET0_RGMII_RXC_CONN_NAND_WE_B SC_P_ENET0_RGMII_RXC 2 +#define SC_P_ENET0_RGMII_RXC_CONN_USDHC1_CLK SC_P_ENET0_RGMII_RXC 3 +#define SC_P_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 SC_P_ENET0_RGMII_RXC 4 +#define SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL SC_P_ENET0_RGMII_RX_CTL 0 +#define SC_P_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD SC_P_ENET0_RGMII_RX_CTL 3 +#define SC_P_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04 SC_P_ENET0_RGMII_RX_CTL 4 +#define SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 SC_P_ENET0_RGMII_RXD0 0 +#define SC_P_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 SC_P_ENET0_RGMII_RXD0 3 +#define SC_P_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05 SC_P_ENET0_RGMII_RXD0 4 +#define SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 SC_P_ENET0_RGMII_RXD1 0 +#define SC_P_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 SC_P_ENET0_RGMII_RXD1 3 +#define SC_P_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06 SC_P_ENET0_RGMII_RXD1 4 +#define SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 SC_P_ENET0_RGMII_RXD2 0 +#define SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER SC_P_ENET0_RGMII_RXD2 1 +#define SC_P_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 SC_P_ENET0_RGMII_RXD2 3 +#define SC_P_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07 SC_P_ENET0_RGMII_RXD2 4 +#define SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 SC_P_ENET0_RGMII_RXD3 0 +#define SC_P_ENET0_RGMII_RXD3_CONN_NAND_ALE SC_P_ENET0_RGMII_RXD3 2 +#define SC_P_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 SC_P_ENET0_RGMII_RXD3 3 +#define SC_P_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08 SC_P_ENET0_RGMII_RXD3 4 +#define SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1 0 +#define SC_P_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M SC_P_ENET0_REFCLK_125M_25M 0 +#define SC_P_ENET0_REFCLK_125M_25M_CONN_ENET0_PPS SC_P_ENET0_REFCLK_125M_25M 1 +#define SC_P_ENET0_REFCLK_125M_25M_CONN_ENET1_PPS SC_P_ENET0_REFCLK_125M_25M 2 +#define SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 SC_P_ENET0_REFCLK_125M_25M 4 +#define SC_P_ENET0_MDIO_CONN_ENET0_MDIO SC_P_ENET0_MDIO 0 +#define SC_P_ENET0_MDIO_ADMA_I2C3_SDA SC_P_ENET0_MDIO 1 +#define SC_P_ENET0_MDIO_CONN_ENET1_MDIO SC_P_ENET0_MDIO 2 +#define SC_P_ENET0_MDIO_LSIO_GPIO5_IO10 SC_P_ENET0_MDIO 4 +#define SC_P_ENET0_MDC_CONN_ENET0_MDC SC_P_ENET0_MDC 0 +#define SC_P_ENET0_MDC_ADMA_I2C3_SCL SC_P_ENET0_MDC 1 +#define SC_P_ENET0_MDC_CONN_ENET1_MDC SC_P_ENET0_MDC 2 +#define SC_P_ENET0_MDC_LSIO_GPIO5_IO11 SC_P_ENET0_MDC 4 +#define SC_P_ESAI0_FSR_ADMA_ESAI0_FSR SC_P_ESAI0_FSR 0 +#define SC_P_ESAI0_FSR_CONN_ENET1_RCLK50M_OUT SC_P_ESAI0_FSR 1 +#define SC_P_ESAI0_FSR_ADMA_LCDIF_D00 SC_P_ESAI0_FSR 2 +#define SC_P_ESAI0_FSR_CONN_ENET1_RGMII_TXC SC_P_ESAI0_FSR 3 +#define SC_P_ESAI0_FSR_CONN_ENET1_RCLK50M_IN SC_P_ESAI0_FSR 4 +#define SC_P_ESAI0_FST_ADMA_ESAI0_FST SC_P_ESAI0_FST 0 +#define SC_P_ESAI0_FST_CONN_MLB_CLK SC_P_ESAI0_FST 1 +#define SC_P_ESAI0_FST_ADMA_LCDIF_D01 SC_P_ESAI0_FST 2 +#define SC_P_ESAI0_FST_CONN_ENET1_RGMII_TXD2 SC_P_ESAI0_FST 3 +#define SC_P_ESAI0_FST_LSIO_GPIO0_IO01 SC_P_ESAI0_FST 4 +#define SC_P_ESAI0_SCKR_ADMA_ESAI0_SCKR SC_P_ESAI0_SCKR 0 +#define SC_P_ESAI0_SCKR_ADMA_LCDIF_D02 SC_P_ESAI0_SCKR 2 +#define SC_P_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL SC_P_ESAI0_SCKR 3 +#define SC_P_ESAI0_SCKR_LSIO_GPIO0_IO02 SC_P_ESAI0_SCKR 4 +#define SC_P_ESAI0_SCKT_ADMA_ESAI0_SCKT SC_P_ESAI0_SCKT 0 +#define SC_P_ESAI0_SCKT_CONN_MLB_SIG SC_P_ESAI0_SCKT 1 +#define SC_P_ESAI0_SCKT_ADMA_LCDIF_D03 SC_P_ESAI0_SCKT 2 +#define SC_P_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3 SC_P_ESAI0_SCKT 3 +#define SC_P_ESAI0_SCKT_LSIO_GPIO0_IO03 SC_P_ESAI0_SCKT 4 +#define SC_P_ESAI0_TX0_ADMA_ESAI0_TX0 SC_P_ESAI0_TX0 0 +#define SC_P_ESAI0_TX0_CONN_MLB_DATA SC_P_ESAI0_TX0 1 +#define SC_P_ESAI0_TX0_ADMA_LCDIF_D04 SC_P_ESAI0_TX0 2 +#define SC_P_ESAI0_TX0_CONN_ENET1_RGMII_RXC SC_P_ESAI0_TX0 3 +#define SC_P_ESAI0_TX0_LSIO_GPIO0_IO04 SC_P_ESAI0_TX0 4 +#define SC_P_ESAI0_TX1_ADMA_ESAI0_TX1 SC_P_ESAI0_TX1 0 +#define SC_P_ESAI0_TX1_ADMA_LCDIF_D05 SC_P_ESAI0_TX1 2 +#define SC_P_ESAI0_TX1_CONN_ENET1_RGMII_RXD3 SC_P_ESAI0_TX1 3 +#define SC_P_ESAI0_TX1_LSIO_GPIO0_IO05 SC_P_ESAI0_TX1 4 +#define SC_P_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3 SC_P_ESAI0_TX2_RX3 0 +#define SC_P_ESAI0_TX2_RX3_CONN_ENET1_RMII_RX_ER SC_P_ESAI0_TX2_RX3 1 +#define SC_P_ESAI0_TX2_RX3_ADMA_LCDIF_D06 SC_P_ESAI0_TX2_RX3 2 +#define SC_P_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2 SC_P_ESAI0_TX2_RX3 3 +#define SC_P_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 SC_P_ESAI0_TX2_RX3 4 +#define SC_P_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2 SC_P_ESAI0_TX3_RX2 0 +#define SC_P_ESAI0_TX3_RX2_ADMA_LCDIF_D07 SC_P_ESAI0_TX3_RX2 2 +#define SC_P_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1 SC_P_ESAI0_TX3_RX2 3 +#define SC_P_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 SC_P_ESAI0_TX3_RX2 4 +#define SC_P_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1 SC_P_ESAI0_TX4_RX1 0 +#define SC_P_ESAI0_TX4_RX1_ADMA_LCDIF_D08 SC_P_ESAI0_TX4_RX1 2 +#define SC_P_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0 SC_P_ESAI0_TX4_RX1 3 +#define SC_P_ESAI0_TX4_RX1_LSIO_GPIO0_IO08 SC_P_ESAI0_TX4_RX1 4 +#define SC_P_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0 SC_P_ESAI0_TX5_RX0 0 +#define SC_P_ESAI0_TX5_RX0_ADMA_LCDIF_D09 SC_P_ESAI0_TX5_RX0 2 +#define SC_P_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1 SC_P_ESAI0_TX5_RX0 3 +#define SC_P_ESAI0_TX5_RX0_LSIO_GPIO0_IO09 SC_P_ESAI0_TX5_RX0 4 +#define SC_P_SPDIF0_RX_ADMA_SPDIF0_RX SC_P_SPDIF0_RX 0 +#define SC_P_SPDIF0_RX_ADMA_MQS_R SC_P_SPDIF0_RX 1 +#define SC_P_SPDIF0_RX_ADMA_LCDIF_D10 SC_P_SPDIF0_RX 2 +#define SC_P_SPDIF0_RX_CONN_ENET1_RGMII_RXD0 SC_P_SPDIF0_RX 3 +#define SC_P_SPDIF0_RX_LSIO_GPIO0_IO10 SC_P_SPDIF0_RX 4 +#define SC_P_SPDIF0_TX_ADMA_SPDIF0_TX SC_P_SPDIF0_TX 0 +#define SC_P_SPDIF0_TX_ADMA_MQS_L SC_P_SPDIF0_TX 1 +#define SC_P_SPDIF0_TX_ADMA_LCDIF_D11 SC_P_SPDIF0_TX 2 +#define SC_P_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL SC_P_SPDIF0_TX 3 +#define SC_P_SPDIF0_TX_LSIO_GPIO0_IO11 SC_P_SPDIF0_TX 4 +#define SC_P_SPDIF0_EXT_CLK_ADMA_SPDIF0_EXT_CLK SC_P_SPDIF0_EXT_CLK 0 +#define SC_P_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 SC_P_SPDIF0_EXT_CLK 2 +#define SC_P_SPDIF0_EXT_CLK_CONN_ENET1_REFCLK_125M_25M SC_P_SPDIF0_EXT_CLK 3 +#define SC_P_SPDIF0_EXT_CLK_LSIO_GPIO0_IO12 SC_P_SPDIF0_EXT_CLK 4 +#define SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB 0 +#define SC_P_SPI3_SCK_ADMA_SPI3_SCK SC_P_SPI3_SCK 0 +#define SC_P_SPI3_SCK_ADMA_LCDIF_D13 SC_P_SPI3_SCK 2 +#define SC_P_SPI3_SCK_LSIO_GPIO0_IO13 SC_P_SPI3_SCK 4 +#define SC_P_SPI3_SDO_ADMA_SPI3_SDO SC_P_SPI3_SDO 0 +#define SC_P_SPI3_SDO_ADMA_LCDIF_D14 SC_P_SPI3_SDO 2 +#define SC_P_SPI3_SDO_LSIO_GPIO0_IO14 SC_P_SPI3_SDO 4 +#define SC_P_SPI3_SDI_ADMA_SPI3_SDI SC_P_SPI3_SDI 0 +#define SC_P_SPI3_SDI_ADMA_LCDIF_D15 SC_P_SPI3_SDI 2 +#define SC_P_SPI3_SDI_LSIO_GPIO0_IO15 SC_P_SPI3_SDI 4 +#define SC_P_SPI3_CS0_ADMA_SPI3_CS0 SC_P_SPI3_CS0 0 +#define SC_P_SPI3_CS0_ADMA_ACM_MCLK_OUT1 SC_P_SPI3_CS0 1 +#define SC_P_SPI3_CS0_ADMA_LCDIF_HSYNC SC_P_SPI3_CS0 2 +#define SC_P_SPI3_CS0_LSIO_GPIO0_IO16 SC_P_SPI3_CS0 4 +#define SC_P_SPI3_CS1_ADMA_SPI3_CS1 SC_P_SPI3_CS1 0 +#define SC_P_SPI3_CS1_ADMA_I2C3_SCL SC_P_SPI3_CS1 1 +#define SC_P_SPI3_CS1_ADMA_LCDIF_RESET SC_P_SPI3_CS1 2 +#define SC_P_SPI3_CS1_ADMA_SPI2_CS0 SC_P_SPI3_CS1 3 +#define SC_P_SPI3_CS1_ADMA_LCDIF_D16 SC_P_SPI3_CS1 4 +#define SC_P_MCLK_IN1_ADMA_ACM_MCLK_IN1 SC_P_MCLK_IN1 0 +#define SC_P_MCLK_IN1_ADMA_I2C3_SDA SC_P_MCLK_IN1 1 +#define SC_P_MCLK_IN1_ADMA_LCDIF_EN SC_P_MCLK_IN1 2 +#define SC_P_MCLK_IN1_ADMA_SPI2_SCK SC_P_MCLK_IN1 3 +#define SC_P_MCLK_IN1_ADMA_LCDIF_D17 SC_P_MCLK_IN1 4 +#define SC_P_MCLK_IN0_ADMA_ACM_MCLK_IN0 SC_P_MCLK_IN0 0 +#define SC_P_MCLK_IN0_ADMA_ESAI0_RX_HF_CLK SC_P_MCLK_IN0 1 +#define SC_P_MCLK_IN0_ADMA_LCDIF_VSYNC SC_P_MCLK_IN0 2 +#define SC_P_MCLK_IN0_ADMA_SPI2_SDI SC_P_MCLK_IN0 3 +#define SC_P_MCLK_IN0_LSIO_GPIO0_IO19 SC_P_MCLK_IN0 4 +#define SC_P_MCLK_OUT0_ADMA_ACM_MCLK_OUT0 SC_P_MCLK_OUT0 0 +#define SC_P_MCLK_OUT0_ADMA_ESAI0_TX_HF_CLK SC_P_MCLK_OUT0 1 +#define SC_P_MCLK_OUT0_ADMA_LCDIF_CLK SC_P_MCLK_OUT0 2 +#define SC_P_MCLK_OUT0_ADMA_SPI2_SDO SC_P_MCLK_OUT0 3 +#define SC_P_MCLK_OUT0_LSIO_GPIO0_IO20 SC_P_MCLK_OUT0 4 +#define SC_P_UART1_TX_ADMA_UART1_TX SC_P_UART1_TX 0 +#define SC_P_UART1_TX_LSIO_PWM0_OUT SC_P_UART1_TX 1 +#define SC_P_UART1_TX_LSIO_GPT0_CAPTURE SC_P_UART1_TX 2 +#define SC_P_UART1_TX_LSIO_GPIO0_IO21 SC_P_UART1_TX 4 +#define SC_P_UART1_RX_ADMA_UART1_RX SC_P_UART1_RX 0 +#define SC_P_UART1_RX_LSIO_PWM1_OUT SC_P_UART1_RX 1 +#define SC_P_UART1_RX_LSIO_GPT0_COMPARE SC_P_UART1_RX 2 +#define SC_P_UART1_RX_LSIO_GPT1_CLK SC_P_UART1_RX 3 +#define SC_P_UART1_RX_LSIO_GPIO0_IO22 SC_P_UART1_RX 4 +#define SC_P_UART1_RTS_B_ADMA_UART1_RTS_B SC_P_UART1_RTS_B 0 +#define SC_P_UART1_RTS_B_LSIO_PWM2_OUT SC_P_UART1_RTS_B 1 +#define SC_P_UART1_RTS_B_ADMA_LCDIF_D16 SC_P_UART1_RTS_B 2 +#define SC_P_UART1_RTS_B_LSIO_GPT1_CAPTURE SC_P_UART1_RTS_B 3 +#define SC_P_UART1_RTS_B_LSIO_GPT0_CLK SC_P_UART1_RTS_B 4 +#define SC_P_UART1_CTS_B_ADMA_UART1_CTS_B SC_P_UART1_CTS_B 0 +#define SC_P_UART1_CTS_B_LSIO_PWM3_OUT SC_P_UART1_CTS_B 1 +#define SC_P_UART1_CTS_B_ADMA_LCDIF_D17 SC_P_UART1_CTS_B 2 +#define SC_P_UART1_CTS_B_LSIO_GPT1_COMPARE SC_P_UART1_CTS_B 3 +#define SC_P_UART1_CTS_B_LSIO_GPIO0_IO24 SC_P_UART1_CTS_B 4 +#define SC_P_SAI0_TXD_ADMA_SAI0_TXD SC_P_SAI0_TXD 0 +#define SC_P_SAI0_TXD_ADMA_SAI1_RXC SC_P_SAI0_TXD 1 +#define SC_P_SAI0_TXD_ADMA_SPI1_SDO SC_P_SAI0_TXD 2 +#define SC_P_SAI0_TXD_ADMA_LCDIF_D18 SC_P_SAI0_TXD 3 +#define SC_P_SAI0_TXD_LSIO_GPIO0_IO25 SC_P_SAI0_TXD 4 +#define SC_P_SAI0_TXC_ADMA_SAI0_TXC SC_P_SAI0_TXC 0 +#define SC_P_SAI0_TXC_ADMA_SAI1_TXD SC_P_SAI0_TXC 1 +#define SC_P_SAI0_TXC_ADMA_SPI1_SDI SC_P_SAI0_TXC 2 +#define SC_P_SAI0_TXC_ADMA_LCDIF_D19 SC_P_SAI0_TXC 3 +#define SC_P_SAI0_TXC_LSIO_GPIO0_IO26 SC_P_SAI0_TXC 4 +#define SC_P_SAI0_RXD_ADMA_SAI0_RXD SC_P_SAI0_RXD 0 +#define SC_P_SAI0_RXD_ADMA_SAI1_RXFS SC_P_SAI0_RXD 1 +#define SC_P_SAI0_RXD_ADMA_SPI1_CS0 SC_P_SAI0_RXD 2 +#define SC_P_SAI0_RXD_ADMA_LCDIF_D20 SC_P_SAI0_RXD 3 +#define SC_P_SAI0_RXD_LSIO_GPIO0_IO27 SC_P_SAI0_RXD 4 +#define SC_P_SAI0_TXFS_ADMA_SAI0_TXFS SC_P_SAI0_TXFS 0 +#define SC_P_SAI0_TXFS_ADMA_SPI2_CS1 SC_P_SAI0_TXFS 1 +#define SC_P_SAI0_TXFS_ADMA_SPI1_SCK SC_P_SAI0_TXFS 2 +#define SC_P_SAI0_TXFS_LSIO_GPIO0_IO28 SC_P_SAI0_TXFS 4 +#define SC_P_SAI1_RXD_ADMA_SAI1_RXD SC_P_SAI1_RXD 0 +#define SC_P_SAI1_RXD_ADMA_SAI0_RXFS SC_P_SAI1_RXD 1 +#define SC_P_SAI1_RXD_ADMA_SPI1_CS1 SC_P_SAI1_RXD 2 +#define SC_P_SAI1_RXD_ADMA_LCDIF_D21 SC_P_SAI1_RXD 3 +#define SC_P_SAI1_RXD_LSIO_GPIO0_IO29 SC_P_SAI1_RXD 4 +#define SC_P_SAI1_RXC_ADMA_SAI1_RXC SC_P_SAI1_RXC 0 +#define SC_P_SAI1_RXC_ADMA_SAI1_TXC SC_P_SAI1_RXC 1 +#define SC_P_SAI1_RXC_ADMA_LCDIF_D22 SC_P_SAI1_RXC 3 +#define SC_P_SAI1_RXC_LSIO_GPIO0_IO30 SC_P_SAI1_RXC 4 +#define SC_P_SAI1_RXFS_ADMA_SAI1_RXFS SC_P_SAI1_RXFS 0 +#define SC_P_SAI1_RXFS_ADMA_SAI1_TXFS SC_P_SAI1_RXFS 1 +#define SC_P_SAI1_RXFS_ADMA_LCDIF_D23 SC_P_SAI1_RXFS 3 +#define SC_P_SAI1_RXFS_LSIO_GPIO0_IO31 SC_P_SAI1_RXFS 4 +#define SC_P_SPI2_CS0_ADMA_SPI2_CS0 SC_P_SPI2_CS0 0 +#define SC_P_SPI2_CS0_LSIO_GPIO1_IO00 SC_P_SPI2_CS0 4 +#define SC_P_SPI2_SDO_ADMA_SPI2_SDO SC_P_SPI2_SDO 0 +#define SC_P_SPI2_SDO_LSIO_GPIO1_IO01 SC_P_SPI2_SDO 4 +#define SC_P_SPI2_SDI_ADMA_SPI2_SDI SC_P_SPI2_SDI 0 +#define SC_P_SPI2_SDI_LSIO_GPIO1_IO02 SC_P_SPI2_SDI 4 +#define SC_P_SPI2_SCK_ADMA_SPI2_SCK SC_P_SPI2_SCK 0 +#define SC_P_SPI2_SCK_LSIO_GPIO1_IO03 SC_P_SPI2_SCK 4 +#define SC_P_SPI0_SCK_ADMA_SPI0_SCK SC_P_SPI0_SCK 0 +#define SC_P_SPI0_SCK_ADMA_SAI0_TXC SC_P_SPI0_SCK 1 +#define SC_P_SPI0_SCK_M40_I2C0_SCL SC_P_SPI0_SCK 2 +#define SC_P_SPI0_SCK_M40_GPIO0_IO00 SC_P_SPI0_SCK 3 +#define SC_P_SPI0_SCK_LSIO_GPIO1_IO04 SC_P_SPI0_SCK 4 +#define SC_P_SPI0_SDI_ADMA_SPI0_SDI SC_P_SPI0_SDI 0 +#define SC_P_SPI0_SDI_ADMA_SAI0_TXD SC_P_SPI0_SDI 1 +#define SC_P_SPI0_SDI_M40_TPM0_CH0 SC_P_SPI0_SDI 2 +#define SC_P_SPI0_SDI_M40_GPIO0_IO02 SC_P_SPI0_SDI 3 +#define SC_P_SPI0_SDI_LSIO_GPIO1_IO05 SC_P_SPI0_SDI 4 +#define SC_P_SPI0_SDO_ADMA_SPI0_SDO SC_P_SPI0_SDO 0 +#define SC_P_SPI0_SDO_ADMA_SAI0_TXFS SC_P_SPI0_SDO 1 +#define SC_P_SPI0_SDO_M40_I2C0_SDA SC_P_SPI0_SDO 2 +#define SC_P_SPI0_SDO_M40_GPIO0_IO01 SC_P_SPI0_SDO 3 +#define SC_P_SPI0_SDO_LSIO_GPIO1_IO06 SC_P_SPI0_SDO 4 +#define SC_P_SPI0_CS1_ADMA_SPI0_CS1 SC_P_SPI0_CS1 0 +#define SC_P_SPI0_CS1_ADMA_SAI0_RXC SC_P_SPI0_CS1 1 +#define SC_P_SPI0_CS1_ADMA_SAI1_TXD SC_P_SPI0_CS1 2 +#define SC_P_SPI0_CS1_ADMA_LCD_PWM0_OUT SC_P_SPI0_CS1 3 +#define SC_P_SPI0_CS1_LSIO_GPIO1_IO07 SC_P_SPI0_CS1 4 +#define SC_P_SPI0_CS0_ADMA_SPI0_CS0 SC_P_SPI0_CS0 0 +#define SC_P_SPI0_CS0_ADMA_SAI0_RXD SC_P_SPI0_CS0 1 +#define SC_P_SPI0_CS0_M40_TPM0_CH1 SC_P_SPI0_CS0 2 +#define SC_P_SPI0_CS0_M40_GPIO0_IO03 SC_P_SPI0_CS0 3 +#define SC_P_SPI0_CS0_LSIO_GPIO1_IO08 SC_P_SPI0_CS0 4 +#define SC_P_ADC_IN1_ADMA_ADC_IN1 SC_P_ADC_IN1 0 +#define SC_P_ADC_IN1_M40_I2C0_SDA SC_P_ADC_IN1 1 +#define SC_P_ADC_IN1_M40_GPIO0_IO01 SC_P_ADC_IN1 2 +#define SC_P_ADC_IN1_LSIO_GPIO1_IO09 SC_P_ADC_IN1 4 +#define SC_P_ADC_IN0_ADMA_ADC_IN0 SC_P_ADC_IN0 0 +#define SC_P_ADC_IN0_M40_I2C0_SCL SC_P_ADC_IN0 1 +#define SC_P_ADC_IN0_M40_GPIO0_IO00 SC_P_ADC_IN0 2 +#define SC_P_ADC_IN0_LSIO_GPIO1_IO10 SC_P_ADC_IN0 4 +#define SC_P_ADC_IN3_ADMA_ADC_IN3 SC_P_ADC_IN3 0 +#define SC_P_ADC_IN3_M40_UART0_TX SC_P_ADC_IN3 1 +#define SC_P_ADC_IN3_M40_GPIO0_IO03 SC_P_ADC_IN3 2 +#define SC_P_ADC_IN3_ADMA_ACM_MCLK_OUT0 SC_P_ADC_IN3 3 +#define SC_P_ADC_IN3_LSIO_GPIO1_IO11 SC_P_ADC_IN3 4 +#define SC_P_ADC_IN2_ADMA_ADC_IN2 SC_P_ADC_IN2 0 +#define SC_P_ADC_IN2_M40_UART0_RX SC_P_ADC_IN2 1 +#define SC_P_ADC_IN2_M40_GPIO0_IO02 SC_P_ADC_IN2 2 +#define SC_P_ADC_IN2_ADMA_ACM_MCLK_IN0 SC_P_ADC_IN2 3 +#define SC_P_ADC_IN2_LSIO_GPIO1_IO12 SC_P_ADC_IN2 4 +#define SC_P_ADC_IN5_ADMA_ADC_IN5 SC_P_ADC_IN5 0 +#define SC_P_ADC_IN5_M40_TPM0_CH1 SC_P_ADC_IN5 1 +#define SC_P_ADC_IN5_M40_GPIO0_IO05 SC_P_ADC_IN5 2 +#define SC_P_ADC_IN5_LSIO_GPIO1_IO13 SC_P_ADC_IN5 4 +#define SC_P_ADC_IN4_ADMA_ADC_IN4 SC_P_ADC_IN4 0 +#define SC_P_ADC_IN4_M40_TPM0_CH0 SC_P_ADC_IN4 1 +#define SC_P_ADC_IN4_M40_GPIO0_IO04 SC_P_ADC_IN4 2 +#define SC_P_ADC_IN4_LSIO_GPIO1_IO14 SC_P_ADC_IN4 4 +#define SC_P_FLEXCAN0_RX_ADMA_FLEXCAN0_RX SC_P_FLEXCAN0_RX 0 +#define SC_P_FLEXCAN0_RX_ADMA_SAI2_RXC SC_P_FLEXCAN0_RX 1 +#define SC_P_FLEXCAN0_RX_ADMA_UART0_RTS_B SC_P_FLEXCAN0_RX 2 +#define SC_P_FLEXCAN0_RX_ADMA_SAI1_TXC SC_P_FLEXCAN0_RX 3 +#define SC_P_FLEXCAN0_RX_LSIO_GPIO1_IO15 SC_P_FLEXCAN0_RX 4 +#define SC_P_FLEXCAN0_TX_ADMA_FLEXCAN0_TX SC_P_FLEXCAN0_TX 0 +#define SC_P_FLEXCAN0_TX_ADMA_SAI2_RXD SC_P_FLEXCAN0_TX 1 +#define SC_P_FLEXCAN0_TX_ADMA_UART0_CTS_B SC_P_FLEXCAN0_TX 2 +#define SC_P_FLEXCAN0_TX_ADMA_SAI1_TXFS SC_P_FLEXCAN0_TX 3 +#define SC_P_FLEXCAN0_TX_LSIO_GPIO1_IO16 SC_P_FLEXCAN0_TX 4 +#define SC_P_FLEXCAN1_RX_ADMA_FLEXCAN1_RX SC_P_FLEXCAN1_RX 0 +#define SC_P_FLEXCAN1_RX_ADMA_SAI2_RXFS SC_P_FLEXCAN1_RX 1 +#define SC_P_FLEXCAN1_RX_ADMA_FTM_CH2 SC_P_FLEXCAN1_RX 2 +#define SC_P_FLEXCAN1_RX_ADMA_SAI1_TXD SC_P_FLEXCAN1_RX 3 +#define SC_P_FLEXCAN1_RX_LSIO_GPIO1_IO17 SC_P_FLEXCAN1_RX 4 +#define SC_P_FLEXCAN1_TX_ADMA_FLEXCAN1_TX SC_P_FLEXCAN1_TX 0 +#define SC_P_FLEXCAN1_TX_ADMA_SAI3_RXC SC_P_FLEXCAN1_TX 1 +#define SC_P_FLEXCAN1_TX_ADMA_DMA0_REQ_IN0 SC_P_FLEXCAN1_TX 2 +#define SC_P_FLEXCAN1_TX_ADMA_SAI1_RXD SC_P_FLEXCAN1_TX 3 +#define SC_P_FLEXCAN1_TX_LSIO_GPIO1_IO18 SC_P_FLEXCAN1_TX 4 +#define SC_P_FLEXCAN2_RX_ADMA_FLEXCAN2_RX SC_P_FLEXCAN2_RX 0 +#define SC_P_FLEXCAN2_RX_ADMA_SAI3_RXD SC_P_FLEXCAN2_RX 1 +#define SC_P_FLEXCAN2_RX_ADMA_UART3_RX SC_P_FLEXCAN2_RX 2 +#define SC_P_FLEXCAN2_RX_ADMA_SAI1_RXFS SC_P_FLEXCAN2_RX 3 +#define SC_P_FLEXCAN2_RX_LSIO_GPIO1_IO19 SC_P_FLEXCAN2_RX 4 +#define SC_P_FLEXCAN2_TX_ADMA_FLEXCAN2_TX SC_P_FLEXCAN2_TX 0 +#define SC_P_FLEXCAN2_TX_ADMA_SAI3_RXFS SC_P_FLEXCAN2_TX 1 +#define SC_P_FLEXCAN2_TX_ADMA_UART3_TX SC_P_FLEXCAN2_TX 2 +#define SC_P_FLEXCAN2_TX_ADMA_SAI1_RXC SC_P_FLEXCAN2_TX 3 +#define SC_P_FLEXCAN2_TX_LSIO_GPIO1_IO20 SC_P_FLEXCAN2_TX 4 +#define SC_P_UART0_RX_ADMA_UART0_RX SC_P_UART0_RX 0 +#define SC_P_UART0_RX_ADMA_MQS_R SC_P_UART0_RX 1 +#define SC_P_UART0_RX_ADMA_FLEXCAN0_RX SC_P_UART0_RX 2 +#define SC_P_UART0_RX_SCU_UART0_RX SC_P_UART0_RX 3 +#define SC_P_UART0_RX_LSIO_GPIO1_IO21 SC_P_UART0_RX 4 +#define SC_P_UART0_TX_ADMA_UART0_TX SC_P_UART0_TX 0 +#define SC_P_UART0_TX_ADMA_MQS_L SC_P_UART0_TX 1 +#define SC_P_UART0_TX_ADMA_FLEXCAN0_TX SC_P_UART0_TX 2 +#define SC_P_UART0_TX_SCU_UART0_TX SC_P_UART0_TX 3 +#define SC_P_UART0_TX_LSIO_GPIO1_IO22 SC_P_UART0_TX 4 +#define SC_P_UART2_TX_ADMA_UART2_TX SC_P_UART2_TX 0 +#define SC_P_UART2_TX_ADMA_FTM_CH1 SC_P_UART2_TX 1 +#define SC_P_UART2_TX_ADMA_FLEXCAN1_TX SC_P_UART2_TX 2 +#define SC_P_UART2_TX_LSIO_GPIO1_IO23 SC_P_UART2_TX 4 +#define SC_P_UART2_RX_ADMA_UART2_RX SC_P_UART2_RX 0 +#define SC_P_UART2_RX_ADMA_FTM_CH0 SC_P_UART2_RX 1 +#define SC_P_UART2_RX_ADMA_FLEXCAN1_RX SC_P_UART2_RX 2 +#define SC_P_UART2_RX_LSIO_GPIO1_IO24 SC_P_UART2_RX 4 +#define SC_P_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL SC_P_MIPI_DSI0_I2C0_SCL 0 +#define SC_P_MIPI_DSI0_I2C0_SCL_MIPI_DSI1_GPIO0_IO02 SC_P_MIPI_DSI0_I2C0_SCL 1 +#define SC_P_MIPI_DSI0_I2C0_SCL_LSIO_GPIO1_IO25 SC_P_MIPI_DSI0_I2C0_SCL 4 +#define SC_P_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA SC_P_MIPI_DSI0_I2C0_SDA 0 +#define SC_P_MIPI_DSI0_I2C0_SDA_MIPI_DSI1_GPIO0_IO03 SC_P_MIPI_DSI0_I2C0_SDA 1 +#define SC_P_MIPI_DSI0_I2C0_SDA_LSIO_GPIO1_IO26 SC_P_MIPI_DSI0_I2C0_SDA 4 +#define SC_P_MIPI_DSI0_GPIO0_00_MIPI_DSI0_GPIO0_IO00 SC_P_MIPI_DSI0_GPIO0_00 0 +#define SC_P_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL SC_P_MIPI_DSI0_GPIO0_00 1 +#define SC_P_MIPI_DSI0_GPIO0_00_MIPI_DSI0_PWM0_OUT SC_P_MIPI_DSI0_GPIO0_00 2 +#define SC_P_MIPI_DSI0_GPIO0_00_LSIO_GPIO1_IO27 SC_P_MIPI_DSI0_GPIO0_00 4 +#define SC_P_MIPI_DSI0_GPIO0_01_MIPI_DSI0_GPIO0_IO01 SC_P_MIPI_DSI0_GPIO0_01 0 +#define SC_P_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA SC_P_MIPI_DSI0_GPIO0_01 1 +#define SC_P_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO28 SC_P_MIPI_DSI0_GPIO0_01 4 +#define SC_P_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL SC_P_MIPI_DSI1_I2C0_SCL 0 +#define SC_P_MIPI_DSI1_I2C0_SCL_MIPI_DSI0_GPIO0_IO02 SC_P_MIPI_DSI1_I2C0_SCL 1 +#define SC_P_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO29 SC_P_MIPI_DSI1_I2C0_SCL 4 +#define SC_P_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA SC_P_MIPI_DSI1_I2C0_SDA 0 +#define SC_P_MIPI_DSI1_I2C0_SDA_MIPI_DSI0_GPIO0_IO03 SC_P_MIPI_DSI1_I2C0_SDA 1 +#define SC_P_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30 SC_P_MIPI_DSI1_I2C0_SDA 4 +#define SC_P_MIPI_DSI1_GPIO0_00_MIPI_DSI1_GPIO0_IO00 SC_P_MIPI_DSI1_GPIO0_00 0 +#define SC_P_MIPI_DSI1_GPIO0_00_ADMA_I2C2_SCL SC_P_MIPI_DSI1_GPIO0_00 1 +#define SC_P_MIPI_DSI1_GPIO0_00_MIPI_DSI1_PWM0_OUT SC_P_MIPI_DSI1_GPIO0_00 2 +#define SC_P_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31 SC_P_MIPI_DSI1_GPIO0_00 4 +#define SC_P_MIPI_DSI1_GPIO0_01_MIPI_DSI1_GPIO0_IO01 SC_P_MIPI_DSI1_GPIO0_01 0 +#define SC_P_MIPI_DSI1_GPIO0_01_ADMA_I2C2_SDA SC_P_MIPI_DSI1_GPIO0_01 1 +#define SC_P_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 SC_P_MIPI_DSI1_GPIO0_01 4 +#define SC_P_JTAG_TRST_B_SCU_JTAG_TRST_B SC_P_JTAG_TRST_B 0 +#define SC_P_JTAG_TRST_B_SCU_WDOG0_WDOG_OUT SC_P_JTAG_TRST_B 1 +#define SC_P_PMIC_I2C_SCL_SCU_PMIC_I2C_SCL SC_P_PMIC_I2C_SCL 0 +#define SC_P_PMIC_I2C_SCL_SCU_GPIO0_IOXX_PMIC_A35_ON SC_P_PMIC_I2C_SCL 1 +#define SC_P_PMIC_I2C_SCL_LSIO_GPIO2_IO01 SC_P_PMIC_I2C_SCL 4 +#define SC_P_PMIC_I2C_SDA_SCU_PMIC_I2C_SDA SC_P_PMIC_I2C_SDA 0 +#define SC_P_PMIC_I2C_SDA_SCU_GPIO0_IOXX_PMIC_GPU_ON SC_P_PMIC_I2C_SDA 1 +#define SC_P_PMIC_I2C_SDA_LSIO_GPIO2_IO02 SC_P_PMIC_I2C_SDA 4 +#define SC_P_PMIC_INT_B_SCU_DSC_PMIC_INT_B SC_P_PMIC_INT_B 0 +#define SC_P_SCU_GPIO0_00_SCU_GPIO0_IO00 SC_P_SCU_GPIO0_00 0 +#define SC_P_SCU_GPIO0_00_SCU_UART0_RX SC_P_SCU_GPIO0_00 1 +#define SC_P_SCU_GPIO0_00_M40_UART0_RX SC_P_SCU_GPIO0_00 2 +#define SC_P_SCU_GPIO0_00_ADMA_UART3_RX SC_P_SCU_GPIO0_00 3 +#define SC_P_SCU_GPIO0_00_LSIO_GPIO2_IO03 SC_P_SCU_GPIO0_00 4 +#define SC_P_SCU_GPIO0_01_SCU_GPIO0_IO01 SC_P_SCU_GPIO0_01 0 +#define SC_P_SCU_GPIO0_01_SCU_UART0_TX SC_P_SCU_GPIO0_01 1 +#define SC_P_SCU_GPIO0_01_M40_UART0_TX SC_P_SCU_GPIO0_01 2 +#define SC_P_SCU_GPIO0_01_ADMA_UART3_TX SC_P_SCU_GPIO0_01 3 +#define SC_P_SCU_GPIO0_01_SCU_WDOG0_WDOG_OUT SC_P_SCU_GPIO0_01 4 +#define SC_P_SCU_PMIC_STANDBY_SCU_DSC_PMIC_STANDBY SC_P_SCU_PMIC_STANDBY 0 +#define SC_P_SCU_BOOT_MODE0_SCU_DSC_BOOT_MODE0 SC_P_SCU_BOOT_MODE0 0 +#define SC_P_SCU_BOOT_MODE1_SCU_DSC_BOOT_MODE1 SC_P_SCU_BOOT_MODE1 0 +#define SC_P_SCU_BOOT_MODE2_SCU_DSC_BOOT_MODE2 SC_P_SCU_BOOT_MODE2 0 +#define SC_P_SCU_BOOT_MODE2_SCU_PMIC_I2C_SDA SC_P_SCU_BOOT_MODE2 1 +#define SC_P_SCU_BOOT_MODE3_SCU_DSC_BOOT_MODE3 SC_P_SCU_BOOT_MODE3 0 +#define SC_P_SCU_BOOT_MODE3_SCU_PMIC_I2C_SCL SC_P_SCU_BOOT_MODE3 1 +#define SC_P_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K SC_P_SCU_BOOT_MODE3 3 +#define SC_P_CSI_D00_CI_PI_D02 SC_P_CSI_D00 0 +#define SC_P_CSI_D00_ADMA_SAI0_RXC SC_P_CSI_D00 2 +#define SC_P_CSI_D01_CI_PI_D03 SC_P_CSI_D01 0 +#define SC_P_CSI_D01_ADMA_SAI0_RXD SC_P_CSI_D01 2 +#define SC_P_CSI_D02_CI_PI_D04 SC_P_CSI_D02 0 +#define SC_P_CSI_D02_ADMA_SAI0_RXFS SC_P_CSI_D02 2 +#define SC_P_CSI_D03_CI_PI_D05 SC_P_CSI_D03 0 +#define SC_P_CSI_D03_ADMA_SAI2_RXC SC_P_CSI_D03 2 +#define SC_P_CSI_D04_CI_PI_D06 SC_P_CSI_D04 0 +#define SC_P_CSI_D04_ADMA_SAI2_RXD SC_P_CSI_D04 2 +#define SC_P_CSI_D05_CI_PI_D07 SC_P_CSI_D05 0 +#define SC_P_CSI_D05_ADMA_SAI2_RXFS SC_P_CSI_D05 2 +#define SC_P_CSI_D06_CI_PI_D08 SC_P_CSI_D06 0 +#define SC_P_CSI_D06_ADMA_SAI3_RXC SC_P_CSI_D06 2 +#define SC_P_CSI_D07_CI_PI_D09 SC_P_CSI_D07 0 +#define SC_P_CSI_D07_ADMA_SAI3_RXD SC_P_CSI_D07 2 +#define SC_P_CSI_HSYNC_CI_PI_HSYNC SC_P_CSI_HSYNC 0 +#define SC_P_CSI_HSYNC_CI_PI_D00 SC_P_CSI_HSYNC 1 +#define SC_P_CSI_HSYNC_ADMA_SAI3_RXFS SC_P_CSI_HSYNC 2 +#define SC_P_CSI_VSYNC_CI_PI_VSYNC SC_P_CSI_VSYNC 0 +#define SC_P_CSI_VSYNC_CI_PI_D01 SC_P_CSI_VSYNC 1 +#define SC_P_CSI_PCLK_CI_PI_PCLK SC_P_CSI_PCLK 0 +#define SC_P_CSI_PCLK_MIPI_CSI0_I2C0_SCL SC_P_CSI_PCLK 1 +#define SC_P_CSI_PCLK_ADMA_SPI1_SCK SC_P_CSI_PCLK 3 +#define SC_P_CSI_PCLK_LSIO_GPIO3_IO00 SC_P_CSI_PCLK 4 +#define SC_P_CSI_MCLK_CI_PI_MCLK SC_P_CSI_MCLK 0 +#define SC_P_CSI_MCLK_MIPI_CSI0_I2C0_SDA SC_P_CSI_MCLK 1 +#define SC_P_CSI_MCLK_ADMA_SPI1_SDO SC_P_CSI_MCLK 3 +#define SC_P_CSI_MCLK_LSIO_GPIO3_IO01 SC_P_CSI_MCLK 4 +#define SC_P_CSI_EN_CI_PI_EN SC_P_CSI_EN 0 +#define SC_P_CSI_EN_CI_PI_I2C_SCL SC_P_CSI_EN 1 +#define SC_P_CSI_EN_ADMA_I2C3_SCL SC_P_CSI_EN 2 +#define SC_P_CSI_EN_ADMA_SPI1_SDI SC_P_CSI_EN 3 +#define SC_P_CSI_EN_LSIO_GPIO3_IO02 SC_P_CSI_EN 4 +#define SC_P_CSI_RESET_CI_PI_RESET SC_P_CSI_RESET 0 +#define SC_P_CSI_RESET_CI_PI_I2C_SDA SC_P_CSI_RESET 1 +#define SC_P_CSI_RESET_ADMA_I2C3_SDA SC_P_CSI_RESET 2 +#define SC_P_CSI_RESET_ADMA_SPI1_CS0 SC_P_CSI_RESET 3 +#define SC_P_CSI_RESET_LSIO_GPIO3_IO03 SC_P_CSI_RESET 4 +#define SC_P_MIPI_CSI0_MCLK_OUT_MIPI_CSI0_ACM_MCLK_OUT SC_P_MIPI_CSI0_MCLK_OUT 0 +#define SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 SC_P_MIPI_CSI0_MCLK_OUT 4 +#define SC_P_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_I2C0_SCL SC_P_MIPI_CSI0_I2C0_SCL 0 +#define SC_P_MIPI_CSI0_I2C0_SCL_MIPI_CSI0_GPIO0_IO02 SC_P_MIPI_CSI0_I2C0_SCL 1 +#define SC_P_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 SC_P_MIPI_CSI0_I2C0_SCL 4 +#define SC_P_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA SC_P_MIPI_CSI0_I2C0_SDA 0 +#define SC_P_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_GPIO0_IO03 SC_P_MIPI_CSI0_I2C0_SDA 1 +#define SC_P_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06 SC_P_MIPI_CSI0_I2C0_SDA 4 +#define SC_P_MIPI_CSI0_GPIO0_01_MIPI_CSI0_GPIO0_IO01 SC_P_MIPI_CSI0_GPIO0_01 0 +#define SC_P_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA SC_P_MIPI_CSI0_GPIO0_01 1 +#define SC_P_MIPI_CSI0_GPIO0_01_LSIO_GPIO3_IO07 SC_P_MIPI_CSI0_GPIO0_01 4 +#define SC_P_MIPI_CSI0_GPIO0_00_MIPI_CSI0_GPIO0_IO00 SC_P_MIPI_CSI0_GPIO0_00 0 +#define SC_P_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL SC_P_MIPI_CSI0_GPIO0_00 1 +#define SC_P_MIPI_CSI0_GPIO0_00_LSIO_GPIO3_IO08 SC_P_MIPI_CSI0_GPIO0_00 4 +#define SC_P_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 SC_P_QSPI0A_DATA0 0 +#define SC_P_QSPI0A_DATA0_LSIO_GPIO3_IO09 SC_P_QSPI0A_DATA0 4 +#define SC_P_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 SC_P_QSPI0A_DATA1 0 +#define SC_P_QSPI0A_DATA1_LSIO_GPIO3_IO10 SC_P_QSPI0A_DATA1 4 +#define SC_P_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 SC_P_QSPI0A_DATA2 0 +#define SC_P_QSPI0A_DATA2_LSIO_GPIO3_IO11 SC_P_QSPI0A_DATA2 4 +#define SC_P_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 SC_P_QSPI0A_DATA3 0 +#define SC_P_QSPI0A_DATA3_LSIO_GPIO3_IO12 SC_P_QSPI0A_DATA3 4 +#define SC_P_QSPI0A_DQS_LSIO_QSPI0A_DQS SC_P_QSPI0A_DQS 0 +#define SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13 SC_P_QSPI0A_DQS 4 +#define SC_P_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B SC_P_QSPI0A_SS0_B 0 +#define SC_P_QSPI0A_SS0_B_LSIO_GPIO3_IO14 SC_P_QSPI0A_SS0_B 4 +#define SC_P_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B SC_P_QSPI0A_SS1_B 0 +#define SC_P_QSPI0A_SS1_B_LSIO_GPIO3_IO15 SC_P_QSPI0A_SS1_B 4 +#define SC_P_QSPI0A_SCLK_LSIO_QSPI0A_SCLK SC_P_QSPI0A_SCLK 0 +#define SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16 SC_P_QSPI0A_SCLK 4 +#define SC_P_QSPI0B_SCLK_LSIO_QSPI0B_SCLK SC_P_QSPI0B_SCLK 0 +#define SC_P_QSPI0B_SCLK_LSIO_QSPI1A_SCLK SC_P_QSPI0B_SCLK 1 +#define SC_P_QSPI0B_SCLK_LSIO_KPP0_COL0 SC_P_QSPI0B_SCLK 2 +#define SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17 SC_P_QSPI0B_SCLK 4 +#define SC_P_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 SC_P_QSPI0B_DATA0 0 +#define SC_P_QSPI0B_DATA0_LSIO_QSPI1A_DATA0 SC_P_QSPI0B_DATA0 1 +#define SC_P_QSPI0B_DATA0_LSIO_KPP0_COL1 SC_P_QSPI0B_DATA0 2 +#define SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18 SC_P_QSPI0B_DATA0 4 +#define SC_P_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 SC_P_QSPI0B_DATA1 0 +#define SC_P_QSPI0B_DATA1_LSIO_QSPI1A_DATA1 SC_P_QSPI0B_DATA1 1 +#define SC_P_QSPI0B_DATA1_LSIO_KPP0_COL2 SC_P_QSPI0B_DATA1 2 +#define SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19 SC_P_QSPI0B_DATA1 4 +#define SC_P_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 SC_P_QSPI0B_DATA2 0 +#define SC_P_QSPI0B_DATA2_LSIO_QSPI1A_DATA2 SC_P_QSPI0B_DATA2 1 +#define SC_P_QSPI0B_DATA2_LSIO_KPP0_COL3 SC_P_QSPI0B_DATA2 2 +#define SC_P_QSPI0B_DATA2_LSIO_GPIO3_IO20 SC_P_QSPI0B_DATA2 4 +#define SC_P_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 SC_P_QSPI0B_DATA3 0 +#define SC_P_QSPI0B_DATA3_LSIO_QSPI1A_DATA3 SC_P_QSPI0B_DATA3 1 +#define SC_P_QSPI0B_DATA3_LSIO_KPP0_ROW0 SC_P_QSPI0B_DATA3 2 +#define SC_P_QSPI0B_DATA3_LSIO_GPIO3_IO21 SC_P_QSPI0B_DATA3 4 +#define SC_P_QSPI0B_DQS_LSIO_QSPI0B_DQS SC_P_QSPI0B_DQS 0 +#define SC_P_QSPI0B_DQS_LSIO_QSPI1A_DQS SC_P_QSPI0B_DQS 1 +#define SC_P_QSPI0B_DQS_LSIO_KPP0_ROW1 SC_P_QSPI0B_DQS 2 +#define SC_P_QSPI0B_DQS_LSIO_GPIO3_IO22 SC_P_QSPI0B_DQS 4 +#define SC_P_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B SC_P_QSPI0B_SS0_B 0 +#define SC_P_QSPI0B_SS0_B_LSIO_QSPI1A_SS0_B SC_P_QSPI0B_SS0_B 1 +#define SC_P_QSPI0B_SS0_B_LSIO_KPP0_ROW2 SC_P_QSPI0B_SS0_B 2 +#define SC_P_QSPI0B_SS0_B_LSIO_GPIO3_IO23 SC_P_QSPI0B_SS0_B 4 +#define SC_P_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B SC_P_QSPI0B_SS1_B 0 +#define SC_P_QSPI0B_SS1_B_LSIO_QSPI1A_SS1_B SC_P_QSPI0B_SS1_B 1 +#define SC_P_QSPI0B_SS1_B_LSIO_KPP0_ROW3 SC_P_QSPI0B_SS1_B 2 +#define SC_P_QSPI0B_SS1_B_LSIO_GPIO3_IO24 SC_P_QSPI0B_SS1_B 4 + +#endif /* _SC_PADS_H */

Add i.MX8QXP power and resource definition

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- include/dt-bindings/soc/imx8_pd.h | 188 +++++++++++++ include/dt-bindings/soc/imx_rsrc.h | 557 +++++++++++++++++++++++++++++++++++++ 2 files changed, 745 insertions(+) create mode 100644 include/dt-bindings/soc/imx8_pd.h create mode 100644 include/dt-bindings/soc/imx_rsrc.h

diff --git a/include/dt-bindings/soc/imx8_pd.h b/include/dt-bindings/soc/imx8_pd.h new file mode 100644 index 0000000000..682b608eef --- /dev/null +++ b/include/dt-bindings/soc/imx8_pd.h @@ -0,0 +1,188 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __DT_BINDINGS_IMX8_PD_H +#define __DT_BINDINGS_IMX8_PD_H + +/*! + * These defines are used to indicate a resource. Resources include peripherals + * and bus masters (but not memory regions). Note items from list should + * never be changed or removed (only added to at the end of the list). + */ +#define PD_DC_0 dc0_power_domain +#define PD_DC_0_PLL_0 dc0_pll0 +#define PD_DC_0_PLL_1 dc0_pll1 +#define PD_LVDS0 lvds0_power_domain +#define PD_LVDS0_I2C0 lvds0_i2c0 +#define PD_LVDS0_I2C1 lvds0_i2c1 +#define PD_LVDS0_PWM lvds0_pwm +#define PD_LVDS0_PWM lvds0_pwm +#define PD_LVDS0_GPIO lvds0_gpio +#define PD_DC_1 dc1_power_domain +#define PD_DC_1_PLL_0 dc1_pll0 +#define PD_DC_1_PLL_1 dc1_pll1 +#define PD_LVDS1 lvds1_power_domain +#define PD_LVDS1_I2C0 lvds1_i2c0 +#define PD_LVDS1_I2C1 lvds1_i2c1 +#define PD_LVDS1_PWM lvds1_pwm +#define PD_LVDS1_GPIO lvds1_gpio + +#define PD_DMA dma_power_domain +#define PD_DMA_SPI_0 dma_spi0 +#define PD_DMA_SPI_1 dma_spi1 +#define PD_DMA_SPI_2 dma_spi2 +#define PD_DMA_SPI_3 dma_spi3 +#define PD_DMA_UART0 dma_lpuart0 +#define PD_DMA_UART1 dma_lpuart1 +#define PD_DMA_UART2 dma_lpuart2 +#define PD_DMA_UART3 dma_lpuart3 +#define PD_DMA_UART4 dma_lpuart4 +#define PD_DMA_EMVSIM_0 dma_emvsim0 +#define PD_DMA_EMVSIM_1 dma_emvsim1 +#define PD_DMA_I2C_0 dma_lpi2c0 +#define PD_DMA_I2C_1 dma_lpi2c1 +#define PD_DMA_I2C_2 dma_lpi2c2 +#define PD_DMA_I2C_3 dma_lpi2c3 +#define PD_DMA_I2C_4 dma_lpi2c4 +#define PD_DMA_ADC_0 dma_adc0 +#define PD_DMA_ADC_1 dma_adc1 +#define PD_DMA_FTM_0 dma_ftm0 +#define PD_DMA_FTM_1 dma_ftm1 +#define PD_DMA_CAN_0 dma_flexcan0 +#define PD_DMA_CAN_1 dma_flexcan1 +#define PD_DMA_CAN_2 dma_flexcan2 +#define PD_DMA_PWM_0 dma_pwm0 +#define PD_DMA_LCD_0 dma_lcd0 + +#define PD_HSIO hsio_power_domain +#define PD_HSIO_PCIE_A hsio_pcie0 +#define PD_HSIO_PCIE_B hsio_pcie1 +#define PD_HSIO_SATA_0 hsio_sata0 +#define PD_HSIO_GPIO hsio_gpio + +#define PD_LCD_0 lcd0_power_domain +#define PD_LCD_0_I2C_0 lcd0_i2c0 +#define PD_LCD_0_I2C_1 lcd0_i2c1 +#define PD_LCD_PWM_0 lcd0_pwm0 + +#define PD_LSIO lsio_power_domain +#define PD_LSIO_GPIO_0 lsio_gpio0 +#define PD_LSIO_GPIO_1 lsio_gpio1 +#define PD_LSIO_GPIO_2 lsio_gpio2 +#define PD_LSIO_GPIO_3 lsio_gpio3 +#define PD_LSIO_GPIO_4 lsio_gpio4 +#define PD_LSIO_GPIO_5 lsio_gpio5 +#define PD_LSIO_GPIO_6 lsio_gpio6 +#define PD_LSIO_GPIO_7 lsio_gpio7 +#define PD_LSIO_GPT_0 lsio_gpt0 +#define PD_LSIO_GPT_1 lsio_gpt1 +#define PD_LSIO_GPT_2 lsio_gpt2 +#define PD_LSIO_GPT_3 lsio_gpt3 +#define PD_LSIO_GPT_4 lsio_gpt4 +#define PD_LSIO_KPP lsio_kpp +#define PD_LSIO_FSPI_0 lsio_fspi0 +#define PD_LSIO_FSPI_1 lsio_fspi1 +#define PD_LSIO_PWM_0 lsio_pwm0 +#define PD_LSIO_PWM_1 lsio_pwm1 +#define PD_LSIO_PWM_2 lsio_pwm2 +#define PD_LSIO_PWM_3 lsio_pwm3 +#define PD_LSIO_PWM_4 lsio_pwm4 +#define PD_LSIO_PWM_5 lsio_pwm5 +#define PD_LSIO_PWM_6 lsio_pwm6 +#define PD_LSIO_PWM_7 lsio_pwm7 + +#define PD_CONN connectivity_power_domain +#define PD_CONN_SDHC_0 conn_sdhc0 +#define PD_CONN_SDHC_1 conn_sdhc1 +#define PD_CONN_SDHC_2 conn_sdhc2 +#define PD_CONN_ENET_0 conn_enet0 +#define PD_CONN_ENET_1 conn_enet1 +#define PD_CONN_MLB_0 conn_mlb0 +#define PD_CONN_DMA_4_CH0 conn_dma4_ch0 +#define PD_CONN_DMA_4_CH1 conn_dma4_ch1 +#define PD_CONN_DMA_4_CH2 conn_dma4_ch2 +#define PD_CONN_DMA_4_CH3 conn_dma4_ch3 +#define PD_CONN_DMA_4_CH4 conn_dma4_ch4 +#define PD_CONN_USB_0 conn_usb0 +#define PD_CONN_USB_1 conn_usb1 +#define PD_CONN_USB_0_PHY conn_usb0_phy +#define PD_CONN_USB_2 conn_usb2 +#define PD_CONN_USB_2_PHY conn_usb2_phy +#define PD_CONN_NAND conn_nand + +#define PD_AUDIO audio_power_domain +#define PD_AUD_SAI_0 audio_sai0 +#define PD_AUD_SAI_1 audio_sai1 +#define PD_AUD_SAI_2 audio_sai2 +#define PD_AUD_ASRC_0 audio_asrc0 +#define PD_AUD_ASRC_1 audio_asrc1 +#define PD_AUD_ESAI_0 audio_esai0 +#define PD_AUD_ESAI_1 audio_esai1 +#define PD_AUD_SPDIF_0 audio_spdif0 +#define PD_AUD_SPDIF_1 audio_spdif1 +#define PD_AUD_SAI_3 audio_sai3 +#define PD_AUD_SAI_4 audio_sai4 +#define PD_AUD_SAI_5 audio_sai5 +#define PD_AUD_SAI_6 audio_sai6 +#define PD_AUD_SAI_7 audio_sai7 +#define PD_AUD_GPT_5 audio_gpt5 +#define PD_AUD_GPT_6 audio_gpt6 +#define PD_AUD_GPT_7 audio_gpt7 +#define PD_AUD_GPT_8 audio_gpt8 +#define PD_AUD_GPT_9 audio_gpt9 +#define PD_AUD_GPT_10 audio_gpt10 +#define PD_AUD_AMIX audio_amix +#define PD_AUD_MQS_0 audio_mqs0 +#define PD_AUD_HIFI audio_hifi +#define PD_AUD_OCRAM audio_ocram +#define PD_AUD_MCLK_OUT_0 audio_mclkout0 +#define PD_AUD_MCLK_OUT_1 audio_mclkout1 +#define PD_AUD_AUDIO_PLL_0 audio_audiopll0 +#define PD_AUD_AUDIO_PLL_1 audio_audiopll1 +#define PD_AUD_AUDIO_CLK_0 audio_audioclk0 +#define PD_AUD_AUDIO_CLK_1 audio_audioclk1 + +#define PD_IMAGING imaging_power_domain +#define PD_IMAGING_JPEG_DEC imaging_jpeg_dec +#define PD_IMAGING_JPEG_ENC imaging_jpeg_enc +#define PD_IMAGING_PDMA0 PD_IMAGING +#define PD_IMAGING_PDMA1 imaging_pdma1 +#define PD_IMAGING_PDMA2 imaging_pdma2 +#define PD_IMAGING_PDMA3 imaging_pdma3 +#define PD_IMAGING_PDMA4 imaging_pdma4 +#define PD_IMAGING_PDMA5 imaging_pdma5 +#define PD_IMAGING_PDMA6 imaging_pdma6 +#define PD_IMAGING_PDMA7 imaging_pdma7 + +#define PD_MIPI_0_DSI mipi0_dsi_power_domain +#define PD_MIPI_0_DSI_I2C0 mipi0_dsi_i2c0 +#define PD_MIPI_0_DSI_I2C1 mipi0_dsi_i2c1 +#define PD_MIPI_0_DSI_PWM0 mipi0_dsi_pwm0 +#define PD_MIPI_1_DSI mipi1_dsi_power_domain +#define PD_MIPI_1_DSI_I2C0 mipi1_dsi_i2c0 +#define PD_MIPI_1_DSI_I2C1 mipi1_dsi_i2c1 +#define PD_MIPI_1_DSI_PWM0 mipi1_dsi_pwm0 + +#define PD_MIPI_CSI0 mipi_csi0_power_domain +#define PD_MIPI_CSI0_PWM mipi_csi0_pwm +#define PD_MIPI_CSI0_I2C mipi_csi0_i2c +#define PD_MIPI_CSI1 mipi_csi1_power_domain +#define PD_MIPI_CSI1_PWM_0 mipi_csi1_pwm +#define PD_MIPI_CSI1_I2C_0 mipi_csi1_i2c + +#define PD_HDMI hdmi_power_domain +#define PD_HDMI_I2C_0 hdmi_i2c +#define PD_HDMI_PWM_0 hdmi_pwm +#define PD_HDMI_GPIO_0 hdmi_gpio + +#define PD_HDMI_RX hdmi_rx_power_domain +#define PD_HDMI_RX_I2C hdmi_rx_i2c +#define PD_HDMI_RX_PWM hdmi_rx_pwm + +#define PD_CM40 cm40_power_domain +#define PD_CM40_I2C cm40_i2c +#define PD_CM40_INTMUX cm40_intmux + +#endif /* __DT_BINDINGS_IMX8_PD_H */ diff --git a/include/dt-bindings/soc/imx_rsrc.h b/include/dt-bindings/soc/imx_rsrc.h new file mode 100644 index 0000000000..4870eb985b --- /dev/null +++ b/include/dt-bindings/soc/imx_rsrc.h @@ -0,0 +1,557 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef DT_BINDINGS_RSCRC_IMX_H +#define DT_BINDINGS_RSCRC_IMX_H + +/*! + * These defines are used to indicate a resource. Resources include peripherals + * and bus masters (but not memory regions). Note items from list should + * never be changed or removed (only added to at the end of the list). + */ +#define SC_R_A53 0 +#define SC_R_A53_0 1 +#define SC_R_A53_1 2 +#define SC_R_A53_2 3 +#define SC_R_A53_3 4 +#define SC_R_A72 5 +#define SC_R_A72_0 6 +#define SC_R_A72_1 7 +#define SC_R_A72_2 8 +#define SC_R_A72_3 9 +#define SC_R_CCI 10 +#define SC_R_DB 11 +#define SC_R_DRC_0 12 +#define SC_R_DRC_1 13 +#define SC_R_GIC_SMMU 14 +#define SC_R_IRQSTR_M4_0 15 +#define SC_R_IRQSTR_M4_1 16 +#define SC_R_SMMU 17 +#define SC_R_GIC 18 +#define SC_R_DC_0_BLIT0 19 +#define SC_R_DC_0_BLIT1 20 +#define SC_R_DC_0_BLIT2 21 +#define SC_R_DC_0_BLIT_OUT 22 +#define SC_R_DC_0_CAPTURE0 23 +#define SC_R_DC_0_CAPTURE1 24 +#define SC_R_DC_0_WARP 25 +#define SC_R_DC_0_INTEGRAL0 26 +#define SC_R_DC_0_INTEGRAL1 27 +#define SC_R_DC_0_VIDEO0 28 +#define SC_R_DC_0_VIDEO1 29 +#define SC_R_DC_0_FRAC0 30 +#define SC_R_DC_0_FRAC1 31 +#define SC_R_DC_0 32 +#define SC_R_GPU_2_PID0 33 +#define SC_R_DC_0_PLL_0 34 +#define SC_R_DC_0_PLL_1 35 +#define SC_R_DC_1_BLIT0 36 +#define SC_R_DC_1_BLIT1 37 +#define SC_R_DC_1_BLIT2 38 +#define SC_R_DC_1_BLIT_OUT 39 +#define SC_R_DC_1_CAPTURE0 40 +#define SC_R_DC_1_CAPTURE1 41 +#define SC_R_DC_1_WARP 42 +#define SC_R_DC_1_INTEGRAL0 43 +#define SC_R_DC_1_INTEGRAL1 44 +#define SC_R_DC_1_VIDEO0 45 +#define SC_R_DC_1_VIDEO1 46 +#define SC_R_DC_1_FRAC0 47 +#define SC_R_DC_1_FRAC1 48 +#define SC_R_DC_1 49 +#define SC_R_GPU_3_PID0 50 +#define SC_R_DC_1_PLL_0 51 +#define SC_R_DC_1_PLL_1 52 +#define SC_R_SPI_0 53 +#define SC_R_SPI_1 54 +#define SC_R_SPI_2 55 +#define SC_R_SPI_3 56 +#define SC_R_UART_0 57 +#define SC_R_UART_1 58 +#define SC_R_UART_2 59 +#define SC_R_UART_3 60 +#define SC_R_UART_4 61 +#define SC_R_EMVSIM_0 62 +#define SC_R_EMVSIM_1 63 +#define SC_R_DMA_0_CH0 64 +#define SC_R_DMA_0_CH1 65 +#define SC_R_DMA_0_CH2 66 +#define SC_R_DMA_0_CH3 67 +#define SC_R_DMA_0_CH4 68 +#define SC_R_DMA_0_CH5 69 +#define SC_R_DMA_0_CH6 70 +#define SC_R_DMA_0_CH7 71 +#define SC_R_DMA_0_CH8 72 +#define SC_R_DMA_0_CH9 73 +#define SC_R_DMA_0_CH10 74 +#define SC_R_DMA_0_CH11 75 +#define SC_R_DMA_0_CH12 76 +#define SC_R_DMA_0_CH13 77 +#define SC_R_DMA_0_CH14 78 +#define SC_R_DMA_0_CH15 79 +#define SC_R_DMA_0_CH16 80 +#define SC_R_DMA_0_CH17 81 +#define SC_R_DMA_0_CH18 82 +#define SC_R_DMA_0_CH19 83 +#define SC_R_DMA_0_CH20 84 +#define SC_R_DMA_0_CH21 85 +#define SC_R_DMA_0_CH22 86 +#define SC_R_DMA_0_CH23 87 +#define SC_R_DMA_0_CH24 88 +#define SC_R_DMA_0_CH25 89 +#define SC_R_DMA_0_CH26 90 +#define SC_R_DMA_0_CH27 91 +#define SC_R_DMA_0_CH28 92 +#define SC_R_DMA_0_CH29 93 +#define SC_R_DMA_0_CH30 94 +#define SC_R_DMA_0_CH31 95 +#define SC_R_I2C_0 96 +#define SC_R_I2C_1 97 +#define SC_R_I2C_2 98 +#define SC_R_I2C_3 99 +#define SC_R_I2C_4 100 +#define SC_R_ADC_0 101 +#define SC_R_ADC_1 102 +#define SC_R_FTM_0 103 +#define SC_R_FTM_1 104 +#define SC_R_CAN_0 105 +#define SC_R_CAN_1 106 +#define SC_R_CAN_2 107 +#define SC_R_DMA_1_CH0 108 +#define SC_R_DMA_1_CH1 109 +#define SC_R_DMA_1_CH2 110 +#define SC_R_DMA_1_CH3 111 +#define SC_R_DMA_1_CH4 112 +#define SC_R_DMA_1_CH5 113 +#define SC_R_DMA_1_CH6 114 +#define SC_R_DMA_1_CH7 115 +#define SC_R_DMA_1_CH8 116 +#define SC_R_DMA_1_CH9 117 +#define SC_R_DMA_1_CH10 118 +#define SC_R_DMA_1_CH11 119 +#define SC_R_DMA_1_CH12 120 +#define SC_R_DMA_1_CH13 121 +#define SC_R_DMA_1_CH14 122 +#define SC_R_DMA_1_CH15 123 +#define SC_R_DMA_1_CH16 124 +#define SC_R_DMA_1_CH17 125 +#define SC_R_DMA_1_CH18 126 +#define SC_R_DMA_1_CH19 127 +#define SC_R_DMA_1_CH20 128 +#define SC_R_DMA_1_CH21 129 +#define SC_R_DMA_1_CH22 130 +#define SC_R_DMA_1_CH23 131 +#define SC_R_DMA_1_CH24 132 +#define SC_R_DMA_1_CH25 133 +#define SC_R_DMA_1_CH26 134 +#define SC_R_DMA_1_CH27 135 +#define SC_R_DMA_1_CH28 136 +#define SC_R_DMA_1_CH29 137 +#define SC_R_DMA_1_CH30 138 +#define SC_R_DMA_1_CH31 139 +#define SC_R_UNUSED1 140 +#define SC_R_UNUSED2 141 +#define SC_R_UNUSED3 142 +#define SC_R_UNUSED4 143 +#define SC_R_GPU_0_PID0 144 +#define SC_R_GPU_0_PID1 145 +#define SC_R_GPU_0_PID2 146 +#define SC_R_GPU_0_PID3 147 +#define SC_R_GPU_1_PID0 148 +#define SC_R_GPU_1_PID1 149 +#define SC_R_GPU_1_PID2 150 +#define SC_R_GPU_1_PID3 151 +#define SC_R_PCIE_A 152 +#define SC_R_SERDES_0 153 +#define SC_R_MATCH_0 154 +#define SC_R_MATCH_1 155 +#define SC_R_MATCH_2 156 +#define SC_R_MATCH_3 157 +#define SC_R_MATCH_4 158 +#define SC_R_MATCH_5 159 +#define SC_R_MATCH_6 160 +#define SC_R_MATCH_7 161 +#define SC_R_MATCH_8 162 +#define SC_R_MATCH_9 163 +#define SC_R_MATCH_10 164 +#define SC_R_MATCH_11 165 +#define SC_R_MATCH_12 166 +#define SC_R_MATCH_13 167 +#define SC_R_MATCH_14 168 +#define SC_R_PCIE_B 169 +#define SC_R_SATA_0 170 +#define SC_R_SERDES_1 171 +#define SC_R_HSIO_GPIO 172 +#define SC_R_MATCH_15 173 +#define SC_R_MATCH_16 174 +#define SC_R_MATCH_17 175 +#define SC_R_MATCH_18 176 +#define SC_R_MATCH_19 177 +#define SC_R_MATCH_20 178 +#define SC_R_MATCH_21 179 +#define SC_R_MATCH_22 180 +#define SC_R_MATCH_23 181 +#define SC_R_MATCH_24 182 +#define SC_R_MATCH_25 183 +#define SC_R_MATCH_26 184 +#define SC_R_MATCH_27 185 +#define SC_R_MATCH_28 186 +#define SC_R_LCD_0 187 +#define SC_R_LCD_0_PWM_0 188 +#define SC_R_LCD_0_I2C_0 189 +#define SC_R_LCD_0_I2C_1 190 +#define SC_R_PWM_0 191 +#define SC_R_PWM_1 192 +#define SC_R_PWM_2 193 +#define SC_R_PWM_3 194 +#define SC_R_PWM_4 195 +#define SC_R_PWM_5 196 +#define SC_R_PWM_6 197 +#define SC_R_PWM_7 198 +#define SC_R_GPIO_0 199 +#define SC_R_GPIO_1 200 +#define SC_R_GPIO_2 201 +#define SC_R_GPIO_3 202 +#define SC_R_GPIO_4 203 +#define SC_R_GPIO_5 204 +#define SC_R_GPIO_6 205 +#define SC_R_GPIO_7 206 +#define SC_R_GPT_0 207 +#define SC_R_GPT_1 208 +#define SC_R_GPT_2 209 +#define SC_R_GPT_3 210 +#define SC_R_GPT_4 211 +#define SC_R_KPP 212 +#define SC_R_MU_0A 213 +#define SC_R_MU_1A 214 +#define SC_R_MU_2A 215 +#define SC_R_MU_3A 216 +#define SC_R_MU_4A 217 +#define SC_R_MU_5A 218 +#define SC_R_MU_6A 219 +#define SC_R_MU_7A 220 +#define SC_R_MU_8A 221 +#define SC_R_MU_9A 222 +#define SC_R_MU_10A 223 +#define SC_R_MU_11A 224 +#define SC_R_MU_12A 225 +#define SC_R_MU_13A 226 +#define SC_R_MU_5B 227 +#define SC_R_MU_6B 228 +#define SC_R_MU_7B 229 +#define SC_R_MU_8B 230 +#define SC_R_MU_9B 231 +#define SC_R_MU_10B 232 +#define SC_R_MU_11B 233 +#define SC_R_MU_12B 234 +#define SC_R_MU_13B 235 +#define SC_R_ROM_0 236 +#define SC_R_FSPI_0 237 +#define SC_R_FSPI_1 238 +#define SC_R_IEE 239 +#define SC_R_IEE_R0 240 +#define SC_R_IEE_R1 241 +#define SC_R_IEE_R2 242 +#define SC_R_IEE_R3 243 +#define SC_R_IEE_R4 244 +#define SC_R_IEE_R5 245 +#define SC_R_IEE_R6 246 +#define SC_R_IEE_R7 247 +#define SC_R_SDHC_0 248 +#define SC_R_SDHC_1 249 +#define SC_R_SDHC_2 250 +#define SC_R_ENET_0 251 +#define SC_R_ENET_1 252 +#define SC_R_MLB_0 253 +#define SC_R_DMA_2_CH0 254 +#define SC_R_DMA_2_CH1 255 +#define SC_R_DMA_2_CH2 256 +#define SC_R_DMA_2_CH3 257 +#define SC_R_DMA_2_CH4 258 +#define SC_R_USB_0 259 +#define SC_R_USB_1 260 +#define SC_R_USB_0_PHY 261 +#define SC_R_USB_2 262 +#define SC_R_USB_2_PHY 263 +#define SC_R_DTCP 264 +#define SC_R_NAND 265 +#define SC_R_LVDS_0 266 +#define SC_R_LVDS_0_PWM_0 267 +#define SC_R_LVDS_0_I2C_0 268 +#define SC_R_LVDS_0_I2C_1 269 +#define SC_R_LVDS_1 270 +#define SC_R_LVDS_1_PWM_0 271 +#define SC_R_LVDS_1_I2C_0 272 +#define SC_R_LVDS_1_I2C_1 273 +#define SC_R_LVDS_2 274 +#define SC_R_LVDS_2_PWM_0 275 +#define SC_R_LVDS_2_I2C_0 276 +#define SC_R_LVDS_2_I2C_1 277 +#define SC_R_M4_0_PID0 278 +#define SC_R_M4_0_PID1 279 +#define SC_R_M4_0_PID2 280 +#define SC_R_M4_0_PID3 281 +#define SC_R_M4_0_PID4 282 +#define SC_R_M4_0_RGPIO 283 +#define SC_R_M4_0_SEMA42 284 +#define SC_R_M4_0_TPM 285 +#define SC_R_M4_0_PIT 286 +#define SC_R_M4_0_UART 287 +#define SC_R_M4_0_I2C 288 +#define SC_R_M4_0_INTMUX 289 +#define SC_R_M4_0_SIM 290 +#define SC_R_M4_0_WDOG 291 +#define SC_R_M4_0_MU_0B 292 +#define SC_R_M4_0_MU_0A0 293 +#define SC_R_M4_0_MU_0A1 294 +#define SC_R_M4_0_MU_0A2 295 +#define SC_R_M4_0_MU_0A3 296 +#define SC_R_M4_0_MU_1A 297 +#define SC_R_M4_1_PID0 298 +#define SC_R_M4_1_PID1 299 +#define SC_R_M4_1_PID2 300 +#define SC_R_M4_1_PID3 301 +#define SC_R_M4_1_PID4 302 +#define SC_R_M4_1_RGPIO 303 +#define SC_R_M4_1_SEMA42 304 +#define SC_R_M4_1_TPM 305 +#define SC_R_M4_1_PIT 306 +#define SC_R_M4_1_UART 307 +#define SC_R_M4_1_I2C 308 +#define SC_R_M4_1_INTMUX 309 +#define SC_R_M4_1_SIM 310 +#define SC_R_M4_1_WDOG 311 +#define SC_R_M4_1_MU_0B 312 +#define SC_R_M4_1_MU_0A0 313 +#define SC_R_M4_1_MU_0A1 314 +#define SC_R_M4_1_MU_0A2 315 +#define SC_R_M4_1_MU_0A3 316 +#define SC_R_M4_1_MU_1A 317 +#define SC_R_SAI_0 318 +#define SC_R_SAI_1 319 +#define SC_R_SAI_2 320 +#define SC_R_IRQSTR_SCU2 321 +#define SC_R_IRQSTR_DSP 322 +#define SC_R_UNUSED5 323 +#define SC_R_OCRAM 324 +#define SC_R_AUDIO_PLL_0 325 +#define SC_R_PI_0 326 +#define SC_R_PI_0_PWM_0 327 +#define SC_R_PI_0_PWM_1 328 +#define SC_R_PI_0_I2C_0 329 +#define SC_R_PI_0_PLL 330 +#define SC_R_PI_1 331 +#define SC_R_PI_1_PWM_0 332 +#define SC_R_PI_1_PWM_1 333 +#define SC_R_PI_1_I2C_0 334 +#define SC_R_PI_1_PLL 335 +#define SC_R_SC_PID0 336 +#define SC_R_SC_PID1 337 +#define SC_R_SC_PID2 338 +#define SC_R_SC_PID3 339 +#define SC_R_SC_PID4 340 +#define SC_R_SC_SEMA42 341 +#define SC_R_SC_TPM 342 +#define SC_R_SC_PIT 343 +#define SC_R_SC_UART 344 +#define SC_R_SC_I2C 345 +#define SC_R_SC_MU_0B 346 +#define SC_R_SC_MU_0A0 347 +#define SC_R_SC_MU_0A1 348 +#define SC_R_SC_MU_0A2 349 +#define SC_R_SC_MU_0A3 350 +#define SC_R_SC_MU_1A 351 +#define SC_R_SYSCNT_RD 352 +#define SC_R_SYSCNT_CMP 353 +#define SC_R_DEBUG 354 +#define SC_R_SYSTEM 355 +#define SC_R_SNVS 356 +#define SC_R_OTP 357 +#define SC_R_VPU_PID0 358 +#define SC_R_VPU_PID1 359 +#define SC_R_VPU_PID2 360 +#define SC_R_VPU_PID3 361 +#define SC_R_VPU_PID4 362 +#define SC_R_VPU_PID5 363 +#define SC_R_VPU_PID6 364 +#define SC_R_VPU_PID7 365 +#define SC_R_VPU_UART 366 +#define SC_R_VPUCORE 367 +#define SC_R_VPUCORE_0 368 +#define SC_R_VPUCORE_1 369 +#define SC_R_VPUCORE_2 370 +#define SC_R_VPUCORE_3 371 +#define SC_R_DMA_4_CH0 372 +#define SC_R_DMA_4_CH1 373 +#define SC_R_DMA_4_CH2 374 +#define SC_R_DMA_4_CH3 375 +#define SC_R_DMA_4_CH4 376 +#define SC_R_ISI_CH0 377 +#define SC_R_ISI_CH1 378 +#define SC_R_ISI_CH2 379 +#define SC_R_ISI_CH3 380 +#define SC_R_ISI_CH4 381 +#define SC_R_ISI_CH5 382 +#define SC_R_ISI_CH6 383 +#define SC_R_ISI_CH7 384 +#define SC_R_MJPEG_DEC_S0 385 +#define SC_R_MJPEG_DEC_S1 386 +#define SC_R_MJPEG_DEC_S2 387 +#define SC_R_MJPEG_DEC_S3 388 +#define SC_R_MJPEG_ENC_S0 389 +#define SC_R_MJPEG_ENC_S1 390 +#define SC_R_MJPEG_ENC_S2 391 +#define SC_R_MJPEG_ENC_S3 392 +#define SC_R_MIPI_0 393 +#define SC_R_MIPI_0_PWM_0 394 +#define SC_R_MIPI_0_I2C_0 395 +#define SC_R_MIPI_0_I2C_1 396 +#define SC_R_MIPI_1 397 +#define SC_R_MIPI_1_PWM_0 398 +#define SC_R_MIPI_1_I2C_0 399 +#define SC_R_MIPI_1_I2C_1 400 +#define SC_R_CSI_0 401 +#define SC_R_CSI_0_PWM_0 402 +#define SC_R_CSI_0_I2C_0 403 +#define SC_R_CSI_1 404 +#define SC_R_CSI_1_PWM_0 405 +#define SC_R_CSI_1_I2C_0 406 +#define SC_R_HDMI 407 +#define SC_R_HDMI_I2S 408 +#define SC_R_HDMI_I2C_0 409 +#define SC_R_HDMI_PLL_0 410 +#define SC_R_HDMI_RX 411 +#define SC_R_HDMI_RX_BYPASS 412 +#define SC_R_HDMI_RX_I2C_0 413 +#define SC_R_ASRC_0 414 +#define SC_R_ESAI_0 415 +#define SC_R_SPDIF_0 416 +#define SC_R_SPDIF_1 417 +#define SC_R_SAI_3 418 +#define SC_R_SAI_4 419 +#define SC_R_SAI_5 420 +#define SC_R_GPT_5 421 +#define SC_R_GPT_6 422 +#define SC_R_GPT_7 423 +#define SC_R_GPT_8 424 +#define SC_R_GPT_9 425 +#define SC_R_GPT_10 426 +#define SC_R_DMA_2_CH5 427 +#define SC_R_DMA_2_CH6 428 +#define SC_R_DMA_2_CH7 429 +#define SC_R_DMA_2_CH8 430 +#define SC_R_DMA_2_CH9 431 +#define SC_R_DMA_2_CH10 432 +#define SC_R_DMA_2_CH11 433 +#define SC_R_DMA_2_CH12 434 +#define SC_R_DMA_2_CH13 435 +#define SC_R_DMA_2_CH14 436 +#define SC_R_DMA_2_CH15 437 +#define SC_R_DMA_2_CH16 438 +#define SC_R_DMA_2_CH17 439 +#define SC_R_DMA_2_CH18 440 +#define SC_R_DMA_2_CH19 441 +#define SC_R_DMA_2_CH20 442 +#define SC_R_DMA_2_CH21 443 +#define SC_R_DMA_2_CH22 444 +#define SC_R_DMA_2_CH23 445 +#define SC_R_DMA_2_CH24 446 +#define SC_R_DMA_2_CH25 447 +#define SC_R_DMA_2_CH26 448 +#define SC_R_DMA_2_CH27 449 +#define SC_R_DMA_2_CH28 450 +#define SC_R_DMA_2_CH29 451 +#define SC_R_DMA_2_CH30 452 +#define SC_R_DMA_2_CH31 453 +#define SC_R_ASRC_1 454 +#define SC_R_ESAI_1 455 +#define SC_R_SAI_6 456 +#define SC_R_SAI_7 457 +#define SC_R_AMIX 458 +#define SC_R_MQS_0 459 +#define SC_R_DMA_3_CH0 460 +#define SC_R_DMA_3_CH1 461 +#define SC_R_DMA_3_CH2 462 +#define SC_R_DMA_3_CH3 463 +#define SC_R_DMA_3_CH4 464 +#define SC_R_DMA_3_CH5 465 +#define SC_R_DMA_3_CH6 466 +#define SC_R_DMA_3_CH7 467 +#define SC_R_DMA_3_CH8 468 +#define SC_R_DMA_3_CH9 469 +#define SC_R_DMA_3_CH10 470 +#define SC_R_DMA_3_CH11 471 +#define SC_R_DMA_3_CH12 472 +#define SC_R_DMA_3_CH13 473 +#define SC_R_DMA_3_CH14 474 +#define SC_R_DMA_3_CH15 475 +#define SC_R_DMA_3_CH16 476 +#define SC_R_DMA_3_CH17 477 +#define SC_R_DMA_3_CH18 478 +#define SC_R_DMA_3_CH19 479 +#define SC_R_DMA_3_CH20 480 +#define SC_R_DMA_3_CH21 481 +#define SC_R_DMA_3_CH22 482 +#define SC_R_DMA_3_CH23 483 +#define SC_R_DMA_3_CH24 484 +#define SC_R_DMA_3_CH25 485 +#define SC_R_DMA_3_CH26 486 +#define SC_R_DMA_3_CH27 487 +#define SC_R_DMA_3_CH28 488 +#define SC_R_DMA_3_CH29 489 +#define SC_R_DMA_3_CH30 490 +#define SC_R_DMA_3_CH31 491 +#define SC_R_AUDIO_PLL_1 492 +#define SC_R_AUDIO_CLK_0 493 +#define SC_R_AUDIO_CLK_1 494 +#define SC_R_MCLK_OUT_0 495 +#define SC_R_MCLK_OUT_1 496 +#define SC_R_PMIC_0 497 +#define SC_R_PMIC_1 498 +#define SC_R_SECO 499 +#define SC_R_CAAM_JR1 500 +#define SC_R_CAAM_JR2 501 +#define SC_R_CAAM_JR3 502 +#define SC_R_SECO_MU_2 503 +#define SC_R_SECO_MU_3 504 +#define SC_R_SECO_MU_4 505 +#define SC_R_HDMI_RX_PWM_0 506 +#define SC_R_A35 507 +#define SC_R_A35_0 508 +#define SC_R_A35_1 509 +#define SC_R_A35_2 510 +#define SC_R_A35_3 511 +#define SC_R_DSP 512 +#define SC_R_DSP_RAM 513 +#define SC_R_CAAM_JR1_OUT 514 +#define SC_R_CAAM_JR2_OUT 515 +#define SC_R_CAAM_JR3_OUT 516 +#define SC_R_VPU_DEC_0 517 +#define SC_R_VPU_ENC_0 518 +#define SC_R_CAAM_JR0 519 +#define SC_R_CAAM_JR0_OUT 520 +#define SC_R_PMIC_2 521 +#define SC_R_DBLOGIC 522 +#define SC_R_HDMI_PLL_1 523 +#define SC_R_BOARD_R0 524 +#define SC_R_BOARD_R1 525 +#define SC_R_BOARD_R2 526 +#define SC_R_BOARD_R3 527 +#define SC_R_BOARD_R4 528 +#define SC_R_BOARD_R5 529 +#define SC_R_BOARD_R6 530 +#define SC_R_BOARD_R7 531 +#define SC_R_MJPEG_DEC_MP 532 +#define SC_R_MJPEG_ENC_MP 533 +#define SC_R_VPU_TS_0 534 +#define SC_R_VPU_MU_0 535 +#define SC_R_VPU_MU_1 536 +#define SC_R_VPU_MU_2 537 +#define SC_R_VPU_MU_3 538 +#define SC_R_VPU_ENC_1 539 +#define SC_R_VPU 540 +#define SC_R_LAST 541 + +#endif /* DT_BINDINGS_RSCRC_IMX_H */

Add Kconfig entry for i.MX8QXP

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/Kconfig | 8 ++++++++ arch/arm/mach-imx/Makefile | 1 + arch/arm/mach-imx/imx8/Kconfig | 9 +++++++++ 3 files changed, 18 insertions(+) create mode 100644 arch/arm/mach-imx/imx8/Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5b3746c80b..9fab3b8466 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -655,6 +655,12 @@ config ARCH_MESON targeted at media players and tablet computers. We currently support the S905 (GXBaby) 64-bit SoC.

+config ARCH_IMX8 + bool "NXP i.MX8 platform" + select ARM64 + select DM + select OF_CONTROL + config ARCH_MX8M bool "NXP i.MX8M platform" select ARM64 @@ -1368,6 +1374,8 @@ source "arch/arm/mach-imx/mx7/Kconfig"

source "arch/arm/mach-imx/mx7ulp/Kconfig"

+source "arch/arm/mach-imx/imx8/Kconfig" + source "arch/arm/mach-imx/mx8m/Kconfig"

source "arch/arm/mach-imx/mxs/Kconfig" diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 733c308670..375789efb2 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -141,3 +141,4 @@ obj-$(CONFIG_MX6) += mx6/ obj-$(CONFIG_MX7) += mx7/ obj-$(CONFIG_ARCH_MX7ULP) += mx7ulp/ obj-$(CONFIG_MX8M) += mx8m/ +obj-$(CONFIG_ARCH_IMX8) += imx8/ diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig new file mode 100644 index 0000000000..4117b39da9 --- /dev/null +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -0,0 +1,9 @@ +if ARCH_IMX8 + +config IMX8QXP + bool + +config SYS_SOC + default "imx8" + +endif

Add i.MX8 MISC driver to handle the communication between A35 Core and SCU.

Signed-off-by: Peng Fan peng.fan@nxp.com --- drivers/misc/Makefile | 1 + drivers/misc/imx8/Makefile | 3 + drivers/misc/imx8/scu.c | 247 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 251 insertions(+) create mode 100644 drivers/misc/imx8/Makefile create mode 100644 drivers/misc/imx8/scu.c

diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 4ce9d213f0..c0de02c30d 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_MISC) += misc-uclass.o obj-$(CONFIG_ALI152X) += ali512x.o obj-$(CONFIG_ALTERA_SYSID) += altera_sysid.o +obj-$(CONFIG_ARCH_IMX8) += imx8/ obj-$(CONFIG_ATSHA204A) += atsha204a-i2c.o obj-$(CONFIG_DS4510) += ds4510.o obj-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o diff --git a/drivers/misc/imx8/Makefile b/drivers/misc/imx8/Makefile new file mode 100644 index 0000000000..3395340d22 --- /dev/null +++ b/drivers/misc/imx8/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y += scu.o diff --git a/drivers/misc/imx8/scu.c b/drivers/misc/imx8/scu.c new file mode 100644 index 0000000000..f12c7a96f2 --- /dev/null +++ b/drivers/misc/imx8/scu.c @@ -0,0 +1,247 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2018 NXP + * + * Peng Fan peng.fan@nxp.com + */ + +#include <common.h> +#include <asm/io.h> +#include <dm.h> +#include <dm/lists.h> +#include <dm/root.h> +#include <dm/device-internal.h> +#include <asm/arch/sci/sci.h> +#include <linux/iopoll.h> +#include <misc.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct mu_type { + u32 tr[4]; + u32 rr[4]; + u32 sr; + u32 cr; +}; + +struct imx8_scu { + struct mu_type *base; + struct udevice *clk; + struct udevice *pinclk; +}; + +#define MU_CR_GIE_MASK 0xF0000000u +#define MU_CR_RIE_MASK 0xF000000u +#define MU_CR_GIR_MASK 0xF0000u +#define MU_CR_TIE_MASK 0xF00000u +#define MU_CR_F_MASK 0x7u +#define MU_SR_TE0_MASK BIT(23) +#define MU_SR_RF0_MASK BIT(27) +#define MU_TR_COUNT 4 +#define MU_RR_COUNT 4 +static inline void mu_hal_init(struct mu_type *base) +{ + /* Clear GIEn, RIEn, TIEn, GIRn and ABFn. */ + clrbits_le32(&base->cr, MU_CR_GIE_MASK | MU_CR_RIE_MASK | + MU_CR_TIE_MASK | MU_CR_GIR_MASK | MU_CR_F_MASK); +} + +static int mu_hal_sendmsg(struct mu_type *base, u32 reg_index, u32 msg) +{ + u32 mask = MU_SR_TE0_MASK >> reg_index; + u32 val; + int ret; + + assert(reg_index < MU_TR_COUNT); + + /* Wait TX register to be empty. */ + ret = readl_poll_timeout(&base->sr, val, val & mask, 10000); + if (ret < 0) { + printf("%s timeout\n", __func__); + return -ETIMEDOUT; + } + + writel(msg, &base->tr[reg_index]); + + return 0; +} + +static int mu_hal_receivemsg(struct mu_type *base, u32 reg_index, u32 *msg) +{ + u32 mask = MU_SR_RF0_MASK >> reg_index; + u32 val; + int ret; + + assert(reg_index < MU_TR_COUNT); + + /* Wait RX register to be full. */ + ret = readl_poll_timeout(&base->sr, val, val & mask, 10000); + if (ret < 0) { + printf("%s timeout\n", __func__); + return -ETIMEDOUT; + } + + *msg = readl(&base->rr[reg_index]); + + return 0; +} + +static void sc_ipc_read(struct mu_type *base, void *data) +{ + struct sc_rpc_msg_s *msg = (struct sc_rpc_msg_s *)data; + u8 count = 0; + + /* Check parms */ + if (!base || !msg) + return; + + /* Read first word */ + mu_hal_receivemsg(base, 0, (u32 *)msg); + count++; + + /* Check size */ + if (msg->size > SC_RPC_MAX_MSG) { + *((u32 *)msg) = 0; + return; + } + + /* Read remaining words */ + while (count < msg->size) { + mu_hal_receivemsg(base, count % MU_RR_COUNT, + &msg->DATA.u32[count - 1]); + count++; + } +} + +static void sc_ipc_write(struct mu_type *base, void *data) +{ + struct sc_rpc_msg_s *msg = (struct sc_rpc_msg_s *)data; + u8 count = 0; + + /* Check parms */ + if (!base || !msg) + return; + + /* Check size */ + if (msg->size > SC_RPC_MAX_MSG) + return; + + /* Write first word */ + mu_hal_sendmsg(base, 0, *((u32 *)msg)); + count++; + + /* Write remaining words */ + while (count < msg->size) { + mu_hal_sendmsg(base, count % MU_TR_COUNT, + msg->DATA.u32[count - 1]); + count++; + } +} + +/* + * Note the function prototype use msgid as the 2nd parameter, here + * we take it as no_resp. + */ +static int imx8_scu_call(struct udevice *dev, int no_resp, void *tx_msg, + int tx_size, void *rx_msg, int rx_size) +{ + struct imx8_scu *priv = dev_get_priv(dev); + sc_err_t result; + + /* Expect tx_msg, rx_msg are the same value */ + if (rx_msg && tx_msg != rx_msg) + printf("tx_msg %p, rx_msg %p\n", tx_msg, rx_msg); + + sc_ipc_write(priv->base, tx_msg); + if (!no_resp) + sc_ipc_read(priv->base, rx_msg); + + result = RPC_R8((sc_rpc_msg_t *)tx_msg); + + return sc_err_to_linux(result); +} + +static int imx8_scu_probe(struct udevice *dev) +{ + struct imx8_scu *priv = dev_get_priv(dev); + fdt_addr_t addr; + + debug("%s(dev=%p) (priv=%p)\n", __func__, dev, priv); + + addr = devfdt_get_addr(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + priv->base = (struct mu_type *)addr; + + /* U-Boot not enable interrupts, so need to enable RX interrupts */ + mu_hal_init(priv->base); + + gd->arch.scu_dev = dev; + + device_probe(priv->clk); + device_probe(priv->pinclk); + + return 0; +} + +static int imx8_scu_remove(struct udevice *dev) +{ + return 0; +} + +static int imx8_scu_bind(struct udevice *dev) +{ + struct imx8_scu *priv = dev_get_priv(dev); + int ret; + struct udevice *child; + int node; + + debug("%s(dev=%p)\n", __func__, dev); + + node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, + "fsl,imx8qxp-clk"); + if (node < 0) + panic("No clk node found\n"); + + ret = lists_bind_fdt(dev, offset_to_ofnode(node), &child); + if (ret) + return ret; + + priv->clk = child; + + node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, + "fsl,imx8qxp-iomuxc"); + if (node < 0) + panic("No clk node found\n"); + + ret = lists_bind_fdt(dev, offset_to_ofnode(node), &child); + if (ret) + return ret; + + priv->pinclk = child; + + return 0; +} + +static struct misc_ops imx8_scu_ops = { + .call = imx8_scu_call, +}; + +static const struct udevice_id imx8_scu_ids[] = { + { .compatible = "fsl,imx8qxp-mu" }, + { .compatible = "fsl,imx8-mu" }, + { } +}; + +U_BOOT_DRIVER(imx8_scu) = { + .name = "imx8_scu", + .id = UCLASS_MISC, + .of_match = imx8_scu_ids, + .probe = imx8_scu_probe, + .bind = imx8_scu_bind, + .remove = imx8_scu_remove, + .ops = &imx8_scu_ops, + .priv_auto_alloc_size = sizeof(struct imx8_scu), + .flags = DM_FLAG_PRE_RELOC, +};

Add scu_dev for i.MX8, this will be used as a handle to communite with SCU from A35.

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/global_data.h | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 287a7bd5b1..c3ee5f0c7b 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -74,6 +74,10 @@ struct arch_global_data { #if defined(CONFIG_FSL_LSCH3) && defined(CONFIG_SYS_FSL_HAS_DP_DDR) unsigned long mem2_clk; #endif + +#ifdef CONFIG_ARCH_IMX8 + struct udevice *scu_dev; +#endif };

#include <asm-generic/global_data.h>

Add imx-regs header file to include the register base definition

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-imx8/imx-regs.h | 46 +++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 arch/arm/include/asm/arch-imx8/imx-regs.h

diff --git a/arch/arm/include/asm/arch-imx8/imx-regs.h b/arch/arm/include/asm/arch-imx8/imx-regs.h new file mode 100644 index 0000000000..af0fb5154b --- /dev/null +++ b/arch/arm/include/asm/arch-imx8/imx-regs.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __ASM_ARCH_IMX8_REGS_H__ +#define __ASM_ARCH_IMX8_REGS_H__ + +#define LPUART_BASE 0x5A060000 + +#define GPT1_BASE_ADDR 0x5D140000 +#define SCU_LPUART_BASE 0x33220000 +#define GPIO1_BASE_ADDR 0x5D080000 +#define GPIO2_BASE_ADDR 0x5D090000 +#define GPIO3_BASE_ADDR 0x5D0A0000 +#define GPIO4_BASE_ADDR 0x5D0B0000 +#define GPIO5_BASE_ADDR 0x5D0C0000 +#define GPIO6_BASE_ADDR 0x5D0D0000 +#define GPIO7_BASE_ADDR 0x5D0E0000 +#define GPIO8_BASE_ADDR 0x5D0F0000 +#define LPI2C1_BASE_ADDR 0x5A800000 +#define LPI2C2_BASE_ADDR 0x5A810000 +#define LPI2C3_BASE_ADDR 0x5A820000 +#define LPI2C4_BASE_ADDR 0x5A830000 +#define LPI2C5_BASE_ADDR 0x5A840000 + +#ifdef CONFIG_IMX8QXP +#define LVDS0_PHYCTRL_BASE 0x56221000 +#define LVDS1_PHYCTRL_BASE 0x56241000 +#define MIPI0_SS_BASE 0x56220000 +#define MIPI1_SS_BASE 0x56240000 +#endif + +#define APBH_DMA_ARB_BASE_ADDR 0x5B810000 +#define APBH_DMA_ARB_END_ADDR 0x5B81FFFF +#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR + +#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000) +#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) + +#define PASS_OVER_INFO_ADDR 0x0010fe00 + +#define USB_BASE_ADDR 0x5b0d0000 +#define USB_PHY0_BASE_ADDR 0x5b100000 + +#endif /* __ASM_ARCH_IMX8_REGS_H__ */

Add i.MX8 cpu type and is_imx8/is_imx8qxp help macros.

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-imx/cpu.h | 5 +++++ arch/arm/include/asm/mach-imx/sys_proto.h | 3 +++ 2 files changed, 8 insertions(+)

diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index 62df1b9ad2..cf6303c3f5 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -25,12 +25,14 @@ #define MXC_CPU_MX7S 0x71 /* dummy ID */ #define MXC_CPU_MX7D 0x72 #define MXC_CPU_MX8MQ 0x82 +#define MXC_CPU_IMX8QXP 0x92 /* dummy ID */ #define MXC_CPU_MX7ULP 0xE1 /* Temporally hard code */ #define MXC_CPU_VF610 0xF6 /* dummy ID */

#define MXC_SOC_MX6 0x60 #define MXC_SOC_MX7 0x70 #define MXC_SOC_MX8M 0x80 +#define MXC_SOC_IMX8 0x90 /* dummy */ #define MXC_SOC_MX7ULP 0xE0 /* dummy */

#define CHIP_REV_1_0 0x10 @@ -41,6 +43,9 @@ #define CHIP_REV_2_5 0x25 #define CHIP_REV_3_0 0x30

+#define CHIP_REV_A 0x0 +#define CHIP_REV_B 0x1 + #define BOARD_REV_1_0 0x0 #define BOARD_REV_2_0 0x1 #define BOARD_VER_OFFSET 0x8 diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h index d1d6cbc462..f8890b57da 100644 --- a/arch/arm/include/asm/mach-imx/sys_proto.h +++ b/arch/arm/include/asm/mach-imx/sys_proto.h @@ -27,6 +27,7 @@ #define is_mx6() (is_soc_type(MXC_SOC_MX6)) #define is_mx7() (is_soc_type(MXC_SOC_MX7)) #define is_mx8m() (is_soc_type(MXC_SOC_MX8M)) +#define is_imx8() (is_soc_type(MXC_SOC_IMX8))

#define is_mx6dqp() (is_cpu_type(MXC_CPU_MX6QP) || is_cpu_type(MXC_CPU_MX6DP)) #define is_mx6dq() (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) @@ -41,6 +42,8 @@

#define is_mx7ulp() (is_cpu_type(MXC_CPU_MX7ULP))

+#define is_imx8qxp() (is_cpu_type(MXC_CPU_IMX8QXP)) + #ifdef CONFIG_MX6 #define IMX6_SRC_GPR10_BMODE BIT(28)

Add get_boot_device to detect boot device. Add print_bootinfo to print the boot device info.

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-imx8/sys_proto.h | 10 ++++ arch/arm/mach-imx/imx8/cpu.c | 85 ++++++++++++++++++++++++++++++ 2 files changed, 95 insertions(+) create mode 100644 arch/arm/include/asm/arch-imx8/sys_proto.h

diff --git a/arch/arm/include/asm/arch-imx8/sys_proto.h b/arch/arm/include/asm/arch-imx8/sys_proto.h new file mode 100644 index 0000000000..f9a3016132 --- /dev/null +++ b/arch/arm/include/asm/arch-imx8/sys_proto.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#include <asm/mach-imx/sys_proto.h> +#include <linux/types.h> + +enum boot_device get_boot_device(void); +int print_bootinfo(void); diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index 0b841e291d..90b6ea4211 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -11,8 +11,10 @@ #include <dm/uclass.h> #include <errno.h> #include <asm/arch/sci/sci.h> +#include <asm/arch/sys_proto.h> #include <asm/arch-imx/cpu.h> #include <asm/armv8/cpu.h> +#include <asm/mach-imx/boot_mode.h>

DECLARE_GLOBAL_DATA_PTR;

@@ -91,3 +93,86 @@ int print_cpuinfo(void) return 0; } #endif + +int print_bootinfo(void) +{ + enum boot_device bt_dev = get_boot_device(); + + puts("Boot: "); + switch (bt_dev) { + case SD1_BOOT: + puts("SD0\n"); + break; + case SD2_BOOT: + puts("SD1\n"); + break; + case SD3_BOOT: + puts("SD2\n"); + break; + case MMC1_BOOT: + puts("MMC0\n"); + break; + case MMC2_BOOT: + puts("MMC1\n"); + break; + case MMC3_BOOT: + puts("MMC2\n"); + break; + case FLEXSPI_BOOT: + puts("FLEXSPI\n"); + break; + case SATA_BOOT: + puts("SATA\n"); + break; + case NAND_BOOT: + puts("NAND\n"); + break; + case USB_BOOT: + puts("USB\n"); + break; + default: + printf("Unknown device %u\n", bt_dev); + break; + } + + return 0; +} + +enum boot_device get_boot_device(void) +{ + enum boot_device boot_dev = SD1_BOOT; + + sc_rsrc_t dev_rsrc; + + sc_misc_get_boot_dev(-1, &dev_rsrc); + + switch (dev_rsrc) { + case SC_R_SDHC_0: + boot_dev = MMC1_BOOT; + break; + case SC_R_SDHC_1: + boot_dev = SD2_BOOT; + break; + case SC_R_SDHC_2: + boot_dev = SD3_BOOT; + break; + case SC_R_NAND: + boot_dev = NAND_BOOT; + break; + case SC_R_FSPI_0: + boot_dev = FLEXSPI_BOOT; + break; + case SC_R_SATA_0: + boot_dev = SATA_BOOT; + break; + case SC_R_USB_0: + case SC_R_USB_1: + case SC_R_USB_2: + boot_dev = USB_BOOT; + break; + default: + break; + } + + return boot_dev; +}

Add mmu memmap, some memory regions are reserved by M4, Arm Trusted Firmware, so need to get memreg using SCFW API and setup the memmap.

Add dram_init, dram_init_banksize, get_effective_memsize functions, according to the memreg.

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/mach-imx/imx8/cpu.c | 283 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 283 insertions(+)

diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index 0cacaa895c..389f422be7 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -14,6 +14,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch-imx/cpu.h> #include <asm/armv8/cpu.h> +#include <asm/armv8/mmu.h> #include <asm/mach-imx/boot_mode.h>

DECLARE_GLOBAL_DATA_PTR; @@ -208,3 +209,285 @@ int mmc_get_env_dev(void) return board_mmc_get_env_dev(devno); } #endif + +#define MEMSTART_ALIGNMENT SZ_2M /* Align the memory start with 2MB */ + +static int get_owned_memreg(sc_rm_mr_t mr, sc_faddr_t *addr_start, + sc_faddr_t *addr_end) +{ + sc_faddr_t start, end; + int ret; + bool owned; + + owned = sc_rm_is_memreg_owned(-1, mr); + if (owned) { + ret = sc_rm_get_memreg_info(-1, mr, &start, &end); + if (ret) { + printf("Memreg get info failed, %d\n", ret); + return -EINVAL; + } + debug("0x%llx -- 0x%llx\n", start, end); + *addr_start = start; + *addr_end = end; + + return 0; + } + + return -EINVAL; +} + +phys_size_t get_effective_memsize(void) +{ + sc_rm_mr_t mr; + sc_faddr_t start, end, end1; + int err; + + end1 = (sc_faddr_t)PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE; + + for (mr = 0; mr < 64; mr++) { + err = get_owned_memreg(mr, &start, &end); + if (!err) { + start = roundup(start, MEMSTART_ALIGNMENT); + /* Too small memory region, not use it */ + if (start > end) + continue; + + /* Find the memory region runs the u-boot */ + if (start >= PHYS_SDRAM_1 && start <= end1 && + (start <= CONFIG_SYS_TEXT_BASE && + end >= CONFIG_SYS_TEXT_BASE)) { + if ((end + 1) <= ((sc_faddr_t)PHYS_SDRAM_1 + + PHYS_SDRAM_1_SIZE)) + return (end - PHYS_SDRAM_1 + 1); + else + return PHYS_SDRAM_1_SIZE; + } + } + } + + return PHYS_SDRAM_1_SIZE; +} + +int dram_init(void) +{ + sc_rm_mr_t mr; + sc_faddr_t start, end, end1, end2; + int err; + + end1 = (sc_faddr_t)PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE; + end2 = (sc_faddr_t)PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE; + for (mr = 0; mr < 64; mr++) { + err = get_owned_memreg(mr, &start, &end); + if (!err) { + start = roundup(start, MEMSTART_ALIGNMENT); + /* Too small memory region, not use it */ + if (start > end) + continue; + + if (start >= PHYS_SDRAM_1 && start <= end1) { + if ((end + 1) <= end1) + gd->ram_size += end - start + 1; + else + gd->ram_size += end1 - start; + } else if (start >= PHYS_SDRAM_2 && start <= end2) { + if ((end + 1) <= end2) + gd->ram_size += end - start + 1; + else + gd->ram_size += end2 - start; + } + } + } + + /* If error, set to the default value */ + if (!gd->ram_size) { + gd->ram_size = PHYS_SDRAM_1_SIZE; + gd->ram_size += PHYS_SDRAM_2_SIZE; + } + return 0; +} + +static void dram_bank_sort(int current_bank) +{ + phys_addr_t start; + phys_size_t size; + + while (current_bank > 0) { + if (gd->bd->bi_dram[current_bank - 1].start > + gd->bd->bi_dram[current_bank].start) { + start = gd->bd->bi_dram[current_bank - 1].start; + size = gd->bd->bi_dram[current_bank - 1].size; + + gd->bd->bi_dram[current_bank - 1].start = + gd->bd->bi_dram[current_bank].start; + gd->bd->bi_dram[current_bank - 1].size = + gd->bd->bi_dram[current_bank].size; + + gd->bd->bi_dram[current_bank].start = start; + gd->bd->bi_dram[current_bank].size = size; + } + current_bank--; + } +} + +int dram_init_banksize(void) +{ + sc_rm_mr_t mr; + sc_faddr_t start, end, end1, end2; + int i = 0; + int err; + + end1 = (sc_faddr_t)PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE; + end2 = (sc_faddr_t)PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE; + + for (mr = 0; mr < 64 && i < CONFIG_NR_DRAM_BANKS; mr++) { + err = get_owned_memreg(mr, &start, &end); + if (!err) { + start = roundup(start, MEMSTART_ALIGNMENT); + if (start > end) /* Small memory region, no use it */ + continue; + + if (start >= PHYS_SDRAM_1 && start <= end1) { + gd->bd->bi_dram[i].start = start; + + if ((end + 1) <= end1) + gd->bd->bi_dram[i].size = + end - start + 1; + else + gd->bd->bi_dram[i].size = end1 - start; + + dram_bank_sort(i); + i++; + } else if (start >= PHYS_SDRAM_2 && start <= end2) { + gd->bd->bi_dram[i].start = start; + + if ((end + 1) <= end2) + gd->bd->bi_dram[i].size = + end - start + 1; + else + gd->bd->bi_dram[i].size = end2 - start; + + dram_bank_sort(i); + i++; + } + } + } + + /* If error, set to the default value */ + if (!i) { + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + } + + return 0; +} + +static u64 get_block_attrs(sc_faddr_t addr_start) +{ + u64 attr = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN; + + if ((addr_start >= PHYS_SDRAM_1 && + addr_start <= ((sc_faddr_t)PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) || + (addr_start >= PHYS_SDRAM_2 && + addr_start <= ((sc_faddr_t)PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE))) + return (PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE); + + return attr; +} + +static u64 get_block_size(sc_faddr_t addr_start, sc_faddr_t addr_end) +{ + sc_faddr_t end1, end2; + + end1 = (sc_faddr_t)PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE; + end2 = (sc_faddr_t)PHYS_SDRAM_2 + PHYS_SDRAM_2_SIZE; + + if (addr_start >= PHYS_SDRAM_1 && addr_start <= end1) { + if ((addr_end + 1) > end1) + return end1 - addr_start; + } else if (addr_start >= PHYS_SDRAM_2 && addr_start <= end2) { + if ((addr_end + 1) > end2) + return end2 - addr_start; + } + + return (addr_end - addr_start + 1); +} + +#define MAX_PTE_ENTRIES 512 +#define MAX_MEM_MAP_REGIONS 16 + +static struct mm_region imx8_mem_map[MAX_MEM_MAP_REGIONS]; +struct mm_region *mem_map = imx8_mem_map; + +void enable_caches(void) +{ + sc_rm_mr_t mr; + sc_faddr_t start, end; + int err, i; + + /* Create map for registers access from 0x1c000000 to 0x80000000*/ + imx8_mem_map[0].virt = 0x1c000000UL; + imx8_mem_map[0].phys = 0x1c000000UL; + imx8_mem_map[0].size = 0x64000000UL; + imx8_mem_map[0].attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN; + + i = 1; + for (mr = 0; mr < 64 && i < MAX_MEM_MAP_REGIONS; mr++) { + err = get_owned_memreg(mr, &start, &end); + if (!err) { + imx8_mem_map[i].virt = start; + imx8_mem_map[i].phys = start; + imx8_mem_map[i].size = get_block_size(start, end); + imx8_mem_map[i].attrs = get_block_attrs(start); + i++; + } + } + + if (i < MAX_MEM_MAP_REGIONS) { + imx8_mem_map[i].size = 0; + imx8_mem_map[i].attrs = 0; + } else { + puts("Error, need more MEM MAP REGIONS reserved\n"); + icache_enable(); + return; + } + + for (i = 0; i < MAX_MEM_MAP_REGIONS; i++) { + debug("[%d] vir = 0x%llx phys = 0x%llx size = 0x%llx attrs = 0x%llx\n", i, + imx8_mem_map[i].virt, imx8_mem_map[i].phys, imx8_mem_map[i].size, imx8_mem_map[i].attrs); + } + + icache_enable(); + dcache_enable(); +} + +#ifndef CONFIG_SYS_DCACHE_OFF +u64 get_page_table_size(void) +{ + u64 one_pt = MAX_PTE_ENTRIES * sizeof(u64); + u64 size = 0; + + /* + * For each memory region, the max table size: + * 2 level 3 tables + 2 level 2 tables + 1 level 1 table + */ + size = (2 + 2 + 1) * one_pt * MAX_MEM_MAP_REGIONS + one_pt; + + /* + * We need to duplicate our page table once to have an emergency pt to + * resort to when splitting page tables later on + */ + size *= 2; + + /* + * We may need to split page tables later on if dcache settings change, + * so reserve up to 4 (random pick) page tables for that. + */ + size += one_pt * 4; + + return size; +} +#endif

Add iomux configuration api.

Signed-off-by: Peng Fan peng.fan@nxp.com --- arch/arm/include/asm/arch-imx8/iomux.h | 40 +++++++++++++++++++++++++++++++ arch/arm/mach-imx/imx8/Makefile | 2 +- arch/arm/mach-imx/imx8/iomux.c | 43 ++++++++++++++++++++++++++++++++++ 3 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 arch/arm/include/asm/arch-imx8/iomux.h create mode 100644 arch/arm/mach-imx/imx8/iomux.c

diff --git a/arch/arm/include/asm/arch-imx8/iomux.h b/arch/arm/include/asm/arch-imx8/iomux.h new file mode 100644 index 0000000000..bedd01bfd8 --- /dev/null +++ b/arch/arm/include/asm/arch-imx8/iomux.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __ASM_ARCH_IMX8_IOMUX_H__ +#define __ASM_ARCH_IMX8_IOMUX_H__ + +/* + * We use 64bits value for iomux settings. + * High 32bits are used for padring register value, + * low 16bits are used for pin index. + */ +typedef u64 iomux_cfg_t; + +#define PADRING_IFMUX_EN_SHIFT 31 +#define PADRING_IFMUX_EN_MASK BIT(31) +#define PADRING_GP_EN_SHIFT 30 +#define PADRING_GP_EN_MASK BIT(30) +#define PADRING_IFMUX_SHIFT 27 +#define PADRING_IFMUX_MASK GENMASK(29, 27) +#define PADRING_CONFIG_SHIFT 25 +#define PADRING_LPCONFIG_SHIFT 23 +#define PADRING_PULL_SHIFT 5 +#define PADRING_DSE_SHIFT 0 + +#define MUX_PAD_CTRL_SHIFT 32 +#define MUX_PAD_CTRL_MASK ((iomux_cfg_t)0xFFFFFFFF << MUX_PAD_CTRL_SHIFT) +#define MUX_PAD_CTRL(x) ((iomux_cfg_t)(x) << MUX_PAD_CTRL_SHIFT) +#define MUX_MODE_SHIFT (PADRING_IFMUX_SHIFT + MUX_PAD_CTRL_SHIFT) +#define MUX_MODE_MASK ((iomux_cfg_t)0x7 << MUX_MODE_SHIFT) +#define PIN_ID_MASK ((iomux_cfg_t)0xFFFF) + +/* Valid mux alt0 to alt7 */ +#define MUX_MODE_ALT(x) (((iomux_cfg_t)(x) << MUX_MODE_SHIFT) & \ + MUX_MODE_MASK) + +void imx8_iomux_setup_pad(iomux_cfg_t pad); +void imx8_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list, u32 count); +#endif /* __ASM_ARCH_IMX8_IOMUX_H__ */ diff --git a/arch/arm/mach-imx/imx8/Makefile b/arch/arm/mach-imx/imx8/Makefile index 57876139a1..31ad169ccf 100644 --- a/arch/arm/mach-imx/imx8/Makefile +++ b/arch/arm/mach-imx/imx8/Makefile @@ -4,4 +4,4 @@ # SPDX-License-Identifier: GPL-2.0+ #

-obj-y += cpu.o +obj-y += cpu.o iomux.o diff --git a/arch/arm/mach-imx/imx8/iomux.c b/arch/arm/mach-imx/imx8/iomux.c new file mode 100644 index 0000000000..0ade85fb8f --- /dev/null +++ b/arch/arm/mach-imx/imx8/iomux.c @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/iomux.h> +#include <asm/arch/sci/sci.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * configures a single pad in the iomuxer + */ +void imx8_iomux_setup_pad(iomux_cfg_t pad) +{ + sc_pad_t pin_id = pad & PIN_ID_MASK; + int ret; + + u32 val = (u32)((pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT); + + val |= PADRING_IFMUX_EN_MASK; + val |= PADRING_GP_EN_MASK; + + ret = sc_pad_set(-1, pin_id, val); + if (ret) + printf("sc_pad_set failed!, pin: %u, val: 0x%x\n", pin_id, val); + + debug("iomux: pin %d, val = 0x%x\n", pin_id, val); +} + +/* configures a list of pads within declared with IOMUX_PADS macro */ +void imx8_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list, u32 count) +{ + iomux_cfg_t const *p = pad_list; + int i; + + for (i = 0; i < count; i++) { + imx8_iomux_setup_pad(*p); + p++; + } +}

Add i.MX8 support, there are 8 GPIO banks.

Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-imx8/gpio.h | 21 +++++++++++++++++++++ drivers/gpio/mxc_gpio.c | 30 +++++++++++++++++++++--------- 2 files changed, 42 insertions(+), 9 deletions(-) create mode 100644 arch/arm/include/asm/arch-imx8/gpio.h

diff --git a/arch/arm/include/asm/arch-imx8/gpio.h b/arch/arm/include/asm/arch-imx8/gpio.h new file mode 100644 index 0000000000..24cfde3c29 --- /dev/null +++ b/arch/arm/include/asm/arch-imx8/gpio.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018 NXP + */ + +#ifndef __ASM_ARCH_IMX8_GPIO_H +#define __ASM_ARCH_IMX8_GPIO_H + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +/* GPIO registers */ +struct gpio_regs { + u32 gpio_dr; /* data */ + u32 gpio_dir; /* direction */ + u32 gpio_psr; /* pad satus */ +}; +#endif + +/* IMX8 the GPIO index is from 0 not 1 */ +#define IMX_GPIO_NR(port, index) (((port) * 32) + ((index) & 31)) + +#endif /* __ASM_ARCH_IMX8_GPIO_H */ diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index d8e72ada19..b820160ae7 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -40,21 +40,27 @@ static unsigned long gpio_ports[] = { [2] = GPIO3_BASE_ADDR, #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX7) || defined(CONFIG_MX8M) + defined(CONFIG_MX7) || defined(CONFIG_MX8M) || \ + defined(CONFIG_ARCH_IMX8) [3] = GPIO4_BASE_ADDR, #endif #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX7) || defined(CONFIG_MX8M) + defined(CONFIG_MX7) || defined(CONFIG_MX8M) || \ + defined(CONFIG_ARCH_IMX8) [4] = GPIO5_BASE_ADDR, #if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || defined(CONFIG_MX8M)) [5] = GPIO6_BASE_ADDR, #endif #endif -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_MX7) +#if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_MX7) || \ + defined(CONFIG_ARCH_IMX8) #if !(defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)) [6] = GPIO7_BASE_ADDR, #endif #endif +#if defined(CONFIG_ARCH_IMX8) + [7] = GPIO8_BASE_ADDR, +#endif };

static int mxc_gpio_direction(unsigned int gpio, @@ -347,19 +353,22 @@ static const struct mxc_gpio_plat mxc_plat[] = { { 2, (struct gpio_regs *)GPIO3_BASE_ADDR }, #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX8M) + defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8) { 3, (struct gpio_regs *)GPIO4_BASE_ADDR }, #endif #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX8M) + defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8) { 4, (struct gpio_regs *)GPIO5_BASE_ADDR }, #ifndef CONFIG_MX8M { 5, (struct gpio_regs *)GPIO6_BASE_ADDR }, #endif #endif -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) +#if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_ARCH_IMX8) { 6, (struct gpio_regs *)GPIO7_BASE_ADDR }, #endif +#if defined(CONFIG_ARCH_IMX8) + { 7, (struct gpio_regs *)GPIO8_BASE_ADDR }, +#endif };

U_BOOT_DEVICES(mxc_gpios) = { @@ -368,19 +377,22 @@ U_BOOT_DEVICES(mxc_gpios) = { { "gpio_mxc", &mxc_plat[2] }, #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX8M) + defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8) { "gpio_mxc", &mxc_plat[3] }, #endif #if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ - defined(CONFIG_MX8M) + defined(CONFIG_MX8M) || defined(CONFIG_ARCH_IMX8) { "gpio_mxc", &mxc_plat[4] }, #ifndef CONFIG_MX8M { "gpio_mxc", &mxc_plat[5] }, #endif #endif -#if defined(CONFIG_MX53) || defined(CONFIG_MX6) +#if defined(CONFIG_MX53) || defined(CONFIG_MX6) || defined(CONFIG_ARCH_IMX8) { "gpio_mxc", &mxc_plat[6] }, #endif +#if defined(CONFIG_ARCH_IMX8) + { "gpio_mxc", &mxc_plat[7] }, +#endif }; #endif #endif

Add the power domain DM driver for i.MX8, that it depends on the DTB power domain trees to generate the power domain provider devices. Users needs add power domain trees with property "compatible = "nxp,imx8-pd";"

When power on one PD device, the driver will power on its ancestor PD devices in power domain tree.

When power off on PD device, the driver will check its child PD devices first, only all child PD devices are off, then power off the current PD device. Then the driver checks sibling PD devices. If sibling PD devices are off, then it will power off parent PD device.

There is no counter maintained in this driver, but a state to hold current on/off state. So the request and free functions are empty.

The power domain implementation in i.MX8 DTB set the "#power-domain-cells" to 0, so there is no ID binding with each PD device. We don't use "id" variable in struct power_domain. At same time, we have to set of_xlate to empty to bypass standard of_xlate in uclass driver.

Signed-off-by: Ye Li ye.li@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/include/asm/arch-imx8/power-domain.h | 15 ++ drivers/power/domain/Kconfig | 6 + drivers/power/domain/Makefile | 1 + drivers/power/domain/imx8-power-domain.c | 312 ++++++++++++++++++++++++++ 4 files changed, 334 insertions(+) create mode 100644 arch/arm/include/asm/arch-imx8/power-domain.h create mode 100644 drivers/power/domain/imx8-power-domain.c

diff --git a/arch/arm/include/asm/arch-imx8/power-domain.h b/arch/arm/include/asm/arch-imx8/power-domain.h new file mode 100644 index 0000000000..1396008877 --- /dev/null +++ b/arch/arm/include/asm/arch-imx8/power-domain.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2017 NXP + */ + +#ifndef _ASM_ARCH_IMX8_POWER_DOMAIN_H +#define _ASM_ARCH_IMX8_POWER_DOMAIN_H + +#include <asm/arch/sci/types.h> + +struct imx8_power_domain_platdata { + sc_rsrc_t resource_id; +}; + +#endif diff --git a/drivers/power/domain/Kconfig b/drivers/power/domain/Kconfig index 7cfa761498..2a72642a26 100644 --- a/drivers/power/domain/Kconfig +++ b/drivers/power/domain/Kconfig @@ -31,4 +31,10 @@ config TEGRA186_POWER_DOMAIN Enable support for manipulating Tegra's on-SoC power domains via IPC requests to the BPMP (Boot and Power Management Processor).

+config IMX8_POWER_DOMAIN + bool "Enable i.MX8 power domain driver" + depends on ARCH_IMX8 + help + Enable support for manipulating NXP i.MX8 on-SoC power domains via IPC + requests to the SCU. endmenu diff --git a/drivers/power/domain/Makefile b/drivers/power/domain/Makefile index c7d7644402..c6ad7ff447 100644 --- a/drivers/power/domain/Makefile +++ b/drivers/power/domain/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_BCM6328_POWER_DOMAIN) += bcm6328-power-domain.o obj-$(CONFIG_SANDBOX_POWER_DOMAIN) += sandbox-power-domain.o obj-$(CONFIG_SANDBOX_POWER_DOMAIN) += sandbox-power-domain-test.o obj-$(CONFIG_TEGRA186_POWER_DOMAIN) += tegra186-power-domain.o +obj-$(CONFIG_IMX8_POWER_DOMAIN) += imx8-power-domain.o diff --git a/drivers/power/domain/imx8-power-domain.c b/drivers/power/domain/imx8-power-domain.c new file mode 100644 index 0000000000..be91d626ad --- /dev/null +++ b/drivers/power/domain/imx8-power-domain.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2017 NXP + */ + +#include <common.h> +#include <dm.h> +#include <power-domain-uclass.h> +#include <asm/io.h> +#include <asm/arch/power-domain.h> +#include <dm/device-internal.h> +#include <dm/device.h> +#include <asm/arch/sci/sci.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct imx8_power_domain_priv { + bool state_on; +}; + +static int imx8_power_domain_request(struct power_domain *power_domain) +{ + debug("%s(power_domain=%p)\n", __func__, power_domain); + + return 0; +} + +static int imx8_power_domain_free(struct power_domain *power_domain) +{ + debug("%s(power_domain=%p)\n", __func__, power_domain); + + return 0; +} + +static int imx8_power_domain_on(struct power_domain *power_domain) +{ + struct udevice *dev = power_domain->dev; + struct imx8_power_domain_platdata *pdata; + struct imx8_power_domain_priv *ppriv; + sc_err_t ret; + + struct power_domain parent_domain; + struct udevice *parent = dev_get_parent(dev); + + /* Need to power on parent node first */ + if (device_get_uclass_id(parent) == UCLASS_POWER_DOMAIN) { + parent_domain.dev = parent; + imx8_power_domain_on(&parent_domain); + } + + pdata = (struct imx8_power_domain_platdata *)dev_get_platdata(dev); + ppriv = (struct imx8_power_domain_priv *)dev_get_priv(dev); + + debug("%s(power_domain=%s) resource_id %d\n", __func__, dev->name, + pdata->resource_id); + + /* Already powered on */ + if (ppriv->state_on) + return 0; + + if (pdata->resource_id != SC_R_LAST) { + ret = sc_pm_set_resource_power_mode(-1, pdata->resource_id, + SC_PM_PW_MODE_ON); + if (ret) { + printf("Error: %s Power up failed! (error = %d)\n", + dev->name, ret); + return -EIO; + } + } + + ppriv->state_on = true; + debug("%s is powered on\n", dev->name); + + return 0; +} + +static int imx8_power_domain_off_node(struct power_domain *power_domain) +{ + struct udevice *dev = power_domain->dev; + struct udevice *child; + struct imx8_power_domain_priv *ppriv; + struct imx8_power_domain_priv *child_ppriv; + struct imx8_power_domain_platdata *pdata; + sc_err_t ret; + + ppriv = (struct imx8_power_domain_priv *)dev_get_priv(dev); + pdata = (struct imx8_power_domain_platdata *)dev_get_platdata(dev); + + debug("%s, %s, state_on %d\n", __func__, dev->name, ppriv->state_on); + + /* Already powered off */ + if (!ppriv->state_on) + return 0; + + /* Check if all subnodes are off */ + for (device_find_first_child(dev, &child); + child; + device_find_next_child(&child)) { + if (device_active(child)) { + child_ppriv = + (struct imx8_power_domain_priv *)dev_get_priv(child); + if (child_ppriv->state_on) + return -EPERM; + } + } + + if (pdata->resource_id != SC_R_LAST) { + if (!sc_rm_is_resource_owned(-1, pdata->resource_id)) { + printf("%s not owned by curr partition\n", dev->name); + return 0; + } + ret = sc_pm_set_resource_power_mode(-1, pdata->resource_id, + SC_PM_PW_MODE_OFF); + if (ret) { + printf("Error: %s Power off failed! (error = %d)\n", + dev->name, ret); + return -EIO; + } + } + + ppriv->state_on = false; + debug("%s is powered off\n", dev->name); + + return 0; +} + +static int imx8_power_domain_off_parentnodes(struct power_domain *power_domain) +{ + struct udevice *dev = power_domain->dev; + struct udevice *parent = dev_get_parent(dev); + struct udevice *child; + struct imx8_power_domain_priv *ppriv; + struct imx8_power_domain_priv *child_ppriv; + struct imx8_power_domain_platdata *pdata; + sc_err_t ret; + struct power_domain parent_pd; + + if (device_get_uclass_id(parent) == UCLASS_POWER_DOMAIN) { + pdata = + (struct imx8_power_domain_platdata *)dev_get_platdata(parent); + ppriv = (struct imx8_power_domain_priv *)dev_get_priv(parent); + + debug("%s, %s, state_on %d\n", __func__, parent->name, + ppriv->state_on); + + /* Already powered off */ + if (!ppriv->state_on) + return 0; + + /* + * Check if all sibling nodes are off. If yes, + * power off parent + */ + for (device_find_first_child(parent, &child); child; + device_find_next_child(&child)) { + if (device_active(child)) { + child_ppriv = (struct imx8_power_domain_priv *) + dev_get_priv(child); + /* Find a power on sibling */ + if (child_ppriv->state_on) { + debug("sibling %s, state_on %d\n", + child->name, + child_ppriv->state_on); + return 0; + } + } + } + + /* power off parent */ + if (pdata->resource_id != SC_R_LAST) { + ret = sc_pm_set_resource_power_mode(-1, + pdata->resource_id, + SC_PM_PW_MODE_OFF); + if (ret) { + printf("%s Power off failed! (error = %d)\n", + parent->name, ret); + return -EIO; + } + } + + ppriv->state_on = false; + debug("%s is powered off\n", parent->name); + + parent_pd.dev = parent; + imx8_power_domain_off_parentnodes(&parent_pd); + } + + return 0; +} + +static int imx8_power_domain_off(struct power_domain *power_domain) +{ + int ret; + + debug("%s(power_domain=%p)\n", __func__, power_domain); + + /* Turn off the node */ + ret = imx8_power_domain_off_node(power_domain); + if (ret) { + debug("Can't power off the node of dev %s, ret = %d\n", + power_domain->dev->name, ret); + return ret; + } + + /* Turn off parent nodes, if sibling nodes are all off */ + ret = imx8_power_domain_off_parentnodes(power_domain); + if (ret) { + printf("Failed to power off parent nodes of dev %s, ret = %d\n", + power_domain->dev->name, ret); + return ret; + } + + return 0; +} + +static int imx8_power_domain_of_xlate(struct power_domain *power_domain, + struct ofnode_phandle_args *args) +{ + debug("%s(power_domain=%p)\n", __func__, power_domain); + + /* Do nothing to the xlate, since we don't have args used */ + + return 0; +} + +static int imx8_power_domain_bind(struct udevice *dev) +{ + int offset; + const char *name; + int ret = 0; + + debug("%s(dev=%p)\n", __func__, dev); + + offset = dev_of_offset(dev); + for (offset = fdt_first_subnode(gd->fdt_blob, offset); offset > 0; + offset = fdt_next_subnode(gd->fdt_blob, offset)) { + /* Bind the subnode to this driver */ + name = fdt_get_name(gd->fdt_blob, offset, NULL); + + ret = device_bind_with_driver_data(dev, dev->driver, name, + dev->driver_data, + offset_to_ofnode(offset), + NULL); + + if (ret == -ENODEV) + printf("Driver '%s' refuses to bind\n", + dev->driver->name); + + if (ret) + printf("Error binding driver '%s': %d\n", + dev->driver->name, ret); + } + + return 0; +} + +static int imx8_power_domain_probe(struct udevice *dev) +{ + struct imx8_power_domain_priv *ppriv; + + debug("%s(dev=%s)\n", __func__, dev->name); + + ppriv = (struct imx8_power_domain_priv *)dev_get_priv(dev); + + /* Set default to power off */ + if (ppriv) + ppriv->state_on = false; + + return 0; +} + +static int imx8_power_domain_ofdata_to_platdata(struct udevice *dev) +{ + int reg; + struct imx8_power_domain_platdata *pdata = dev_get_platdata(dev); + + reg = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "reg", -1); + if (reg == -1) { + debug("%s: Invalid resource id %d\n", __func__, reg); + return -EINVAL; + } + pdata->resource_id = (sc_rsrc_t)reg; + + debug("%s resource_id %d\n", __func__, pdata->resource_id); + + return 0; +} + +static const struct udevice_id imx8_power_domain_ids[] = { + { .compatible = "nxp,imx8-pd" }, + { } +}; + +struct power_domain_ops imx8_power_domain_ops = { + .request = imx8_power_domain_request, + .free = imx8_power_domain_free, + .on = imx8_power_domain_on, + .off = imx8_power_domain_off, + .of_xlate = imx8_power_domain_of_xlate, +}; + +U_BOOT_DRIVER(imx8_power_domain) = { + .name = "imx8_power_domain", + .id = UCLASS_POWER_DOMAIN, + .of_match = imx8_power_domain_ids, + .bind = imx8_power_domain_bind, + .probe = imx8_power_domain_probe, + .ofdata_to_platdata = imx8_power_domain_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct imx8_power_domain_platdata), + .priv_auto_alloc_size = sizeof(struct imx8_power_domain_priv), + .ops = &imx8_power_domain_ops, +};

Add i.MX8 compatible string and cpu type support to lpuart driver, to use little endian 32 bits configurations.

Also, accroding to RM, the Receive FIFO Enable (RXFE) field in LPUART FIFO register is bit 3, so the definition should change to 0x08 not 0x40 for i.MX8, otherwise the Receive FIFO is not disabled.

Signed-off-by: Peng Fan peng.fan@nxp.com Signed-off-by: Ye Li ye.li@nxp.com --- drivers/serial/serial_lpuart.c | 15 ++++++++++++--- include/fsl_lpuart.h | 2 +- 2 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c index 1212b72676..c14a8105c9 100644 --- a/drivers/serial/serial_lpuart.c +++ b/drivers/serial/serial_lpuart.c @@ -41,7 +41,11 @@ #define CTRL_RE (1 << 18)

#define FIFO_TXFE 0x80 +#ifdef CONFIG_ARCH_IMX8 +#define FIFO_RXFE 0x08 +#else #define FIFO_RXFE 0x40 +#endif

#define WATER_TXWATER_OFF 1 #define WATER_RXWATER_OFF 16 @@ -54,7 +58,8 @@ DECLARE_GLOBAL_DATA_PTR; enum lpuart_devtype { DEV_VF610 = 1, DEV_LS1021A, - DEV_MX7ULP + DEV_MX7ULP, + DEV_IMX8 };

struct lpuart_serial_platdata { @@ -325,7 +330,7 @@ static int _lpuart32_serial_init(struct lpuart_serial_platdata *plat)

lpuart_write32(plat->flags, &base->match, 0);

- if (plat->devtype == DEV_MX7ULP) { + if (plat->devtype == DEV_MX7ULP || plat->devtype == DEV_IMX8) { _lpuart32_serial_setbrg_7ulp(plat, gd->baudrate); } else { /* provide data bits, parity, stop bit, etc */ @@ -342,7 +347,7 @@ static int lpuart_serial_setbrg(struct udevice *dev, int baudrate) struct lpuart_serial_platdata *plat = dev->platdata;

if (is_lpuart32(dev)) { - if (plat->devtype == DEV_MX7ULP) + if (plat->devtype == DEV_MX7ULP || plat->devtype == DEV_IMX8) _lpuart32_serial_setbrg_7ulp(plat, baudrate); else _lpuart32_serial_setbrg(plat, baudrate); @@ -427,6 +432,8 @@ static int lpuart_serial_ofdata_to_platdata(struct udevice *dev) plat->devtype = DEV_MX7ULP; else if (!fdt_node_check_compatible(blob, node, "fsl,vf610-lpuart")) plat->devtype = DEV_VF610; + else if (!fdt_node_check_compatible(blob, node, "fsl,imx8qm-lpuart")) + plat->devtype = DEV_IMX8;

return 0; } @@ -444,6 +451,8 @@ static const struct udevice_id lpuart_serial_ids[] = { { .compatible = "fsl,imx7ulp-lpuart", .data = LPUART_FLAG_REGMAP_32BIT_REG }, { .compatible = "fsl,vf610-lpuart"}, + { .compatible = "fsl,imx8qm-lpuart", + .data = LPUART_FLAG_REGMAP_32BIT_REG }, { } };

diff --git a/include/fsl_lpuart.h b/include/fsl_lpuart.h index 02ebfefc74..fc517d4b7f 100644 --- a/include/fsl_lpuart.h +++ b/include/fsl_lpuart.h @@ -4,7 +4,7 @@ * */

-#ifdef CONFIG_ARCH_MX7ULP +#if defined(CONFIG_ARCH_MX7ULP) || defined(CONFIG_ARCH_IMX8) struct lpuart_fsl_reg32 { u32 verid; u32 param;

From: Ye Li ye.li@nxp.com

Enable the RX and TX FIFO in LPUART driver to avoid the input lost during u-boot boot up.

Signed-off-by: Ye Li ye.li@nxp.com Acked-by: Peng Fan peng.fan@nxp.com --- drivers/serial/serial_lpuart.c | 33 ++++++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c index c14a8105c9..b28f7cf68d 100644 --- a/drivers/serial/serial_lpuart.c +++ b/drivers/serial/serial_lpuart.c @@ -40,6 +40,12 @@ #define CTRL_TE (1 << 19) #define CTRL_RE (1 << 18)

+#define FIFO_RXFLUSH BIT(14) +#define FIFO_TXFLUSH BIT(15) +#define FIFO_TXSIZE_MASK 0x70 +#define FIFO_TXSIZE_OFF 4 +#define FIFO_RXSIZE_MASK 0x7 +#define FIFO_RXSIZE_OFF 0 #define FIFO_TXFE 0x80 #ifdef CONFIG_ARCH_IMX8 #define FIFO_RXFE 0x08 @@ -47,7 +53,7 @@ #define FIFO_RXFE 0x40 #endif

-#define WATER_TXWATER_OFF 1 +#define WATER_TXWATER_OFF 0 #define WATER_RXWATER_OFF 16

DECLARE_GLOBAL_DATA_PTR; @@ -318,15 +324,28 @@ static int _lpuart32_serial_tstc(struct lpuart_serial_platdata *plat) static int _lpuart32_serial_init(struct lpuart_serial_platdata *plat) { struct lpuart_fsl_reg32 *base = (struct lpuart_fsl_reg32 *)plat->reg; - u32 ctrl; + u32 val, tx_fifo_size;

- lpuart_read32(plat->flags, &base->ctrl, &ctrl); - ctrl &= ~CTRL_RE; - ctrl &= ~CTRL_TE; - lpuart_write32(plat->flags, &base->ctrl, ctrl); + lpuart_read32(plat->flags, &base->ctrl, &val); + val &= ~CTRL_RE; + val &= ~CTRL_TE; + lpuart_write32(plat->flags, &base->ctrl, val);

lpuart_write32(plat->flags, &base->modir, 0); - lpuart_write32(plat->flags, &base->fifo, ~(FIFO_TXFE | FIFO_RXFE)); + + lpuart_read32(plat->flags, &base->fifo, &val); + tx_fifo_size = (val & FIFO_TXSIZE_MASK) >> FIFO_TXSIZE_OFF; + /* Set the TX water to half of FIFO size */ + if (tx_fifo_size > 1) + tx_fifo_size = tx_fifo_size >> 1; + + /* Set RX water to 0, to be triggered by any receive data */ + lpuart_write32(plat->flags, &base->water, + (tx_fifo_size << WATER_TXWATER_OFF)); + + /* Enable TX and RX FIFO */ + val |= (FIFO_TXFE | FIFO_RXFE | FIFO_TXFLUSH | FIFO_RXFLUSH); + lpuart_write32(plat->flags, &base->fifo, val);

lpuart_write32(plat->flags, &base->match, 0);

From: Ye Li ye.li@nxp.com

Add CONFIG_ARCH_IMX8 to use the 64bits support in usdhc driver.

Signed-off-by: Ye Li ye.li@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Jaehoon Chung jh80.chung@samsung.com --- drivers/mmc/fsl_esdhc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 4528345c67..785b9e87a6 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -257,7 +257,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, int timeout; struct fsl_esdhc *regs = priv->esdhc_regs; #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \ - defined(CONFIG_MX8M) + defined(CONFIG_ARCH_IMX8) || defined(CONFIG_MX8M) dma_addr_t addr; #endif uint wml_value; @@ -271,7 +271,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value); #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \ - defined(CONFIG_MX8M) + defined(CONFIG_ARCH_IMX8) || defined(CONFIG_MX8M) addr = virt_to_phys((void *)(data->dest)); if (upper_32_bits(addr)) printf("Error found for upper 32 bits\n"); @@ -301,7 +301,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc, wml_value << 16); #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \ - defined(CONFIG_MX8M) + defined(CONFIG_ARCH_IMX8) || defined(CONFIG_MX8M) addr = virt_to_phys((void *)(data->src)); if (upper_32_bits(addr)) printf("Error found for upper 32 bits\n"); @@ -367,7 +367,7 @@ static void check_and_invalidate_dcache_range unsigned size = roundup(ARCH_DMA_MINALIGN, data->blocks*data->blocksize); #if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \ - defined(CONFIG_MX8M) + defined(CONFIG_ARCH_IMX8) || defined(CONFIG_MX8M) dma_addr_t addr;

addr = virt_to_phys((void *)(data->dest));

Introduce dtsi for i.MX8QXP, since there is other variants i.MX8DX(P), so add them there, because i.MX8QXP includes the dtsi of them.

Signed-off-by: Peng Fan peng.fan@nxp.com --- arch/arm/dts/fsl-imx8-ca35.dtsi | 66 ++++++ arch/arm/dts/fsl-imx8dx.dtsi | 444 ++++++++++++++++++++++++++++++++++++++++ arch/arm/dts/fsl-imx8dxp.dtsi | 11 + arch/arm/dts/fsl-imx8qxp.dtsi | 51 +++++ 4 files changed, 572 insertions(+) create mode 100644 arch/arm/dts/fsl-imx8-ca35.dtsi create mode 100644 arch/arm/dts/fsl-imx8dx.dtsi create mode 100644 arch/arm/dts/fsl-imx8dxp.dtsi create mode 100644 arch/arm/dts/fsl-imx8qxp.dtsi

diff --git a/arch/arm/dts/fsl-imx8-ca35.dtsi b/arch/arm/dts/fsl-imx8-ca35.dtsi new file mode 100644 index 0000000000..28bc32c8b7 --- /dev/null +++ b/arch/arm/dts/fsl-imx8-ca35.dtsi @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <dt-bindings/clock/imx8qxp-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/{ + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* We have 1 clusters having 4 Cortex-A35 cores */ + A35_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-affinity = <&A35_0>, <&A35_1>, <&A35_2>, <&A35_3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + cpu_suspend = <0xc4000001>; + cpu_off = <0xc4000002>; + cpu_on = <0xc4000003>; + }; +}; diff --git a/arch/arm/dts/fsl-imx8dx.dtsi b/arch/arm/dts/fsl-imx8dx.dtsi new file mode 100644 index 0000000000..e84f7cf000 --- /dev/null +++ b/arch/arm/dts/fsl-imx8dx.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "fsl-imx8-ca35.dtsi" +#include <dt-bindings/soc/imx_rsrc.h> +#include <dt-bindings/soc/imx8_pd.h> +#include <dt-bindings/clock/imx8qxp-clock.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/pads-imx8qxp.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Freescale i.MX8DX"; + compatible = "fsl,imx8dx", "fsl,imx8qxp"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &lpuart0; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + /* DRAM space - 1, size : 1 GB DRAM */ + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * reserved-memory layout + * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4 + * Shouldn't be used at A core and Linux side. + * + */ + decoder_boot: decoder_boot@0x84000000 { + no-map; + reg = <0 0x84000000 0 0x2000000>; + }; + encoder_boot: encoder_boot@0x86000000 { + no-map; + reg = <0 0x86000000 0 0x2000000>; + }; + rpmsg_reserved: rpmsg@0x90000000 { + no-map; + reg = <0 0x90000000 0 0x400000>; + }; + decoder_rpc: decoder_rpc@0x90400000 { + no-map; + reg = <0 0x90400000 0 0x1000000>; + }; + encoder_rpc: encoder_rpc@0x91400000 { + no-map; + reg = <0 0x91400000 0 0x1000000>; + }; + dsp_reserved: dsp@0x92400000 { + no-map; + reg = <0 0x92400000 0 0x2000000>; + }; + decoder_str: str@0x94400000 { + no-map; + reg = <0 0x94400000 0 0x1800000>; + }; + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x28000000>; + alloc-ranges = <0 0x96000000 0 0x28000000>; + linux,cma-default; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + mu: mu@5d1c0000 { + compatible = "fsl,imx8-mu"; + reg = <0x0 0x5d1c0000 0x0 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + status = "okay"; + + clk: clk { + compatible = "fsl,imx8qxp-clk"; + #clock-cells = <1>; + }; + + iomuxc: iomuxc { + compatible = "fsl,imx8qxp-iomuxc"; + }; + + }; + + imx8qx-pm { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + pd_lsio: PD_LSIO { + compatible = "nxp,imx8-pd"; + reg = <SC_R_LAST>; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_lsio_gpio0: PD_LSIO_GPIO_0 { + reg = <SC_R_GPIO_0>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio1: PD_LSIO_GPIO_1 { + reg = <SC_R_GPIO_1>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio2: PD_LSIO_GPIO_2 { + reg = <SC_R_GPIO_2>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio3: PD_LSIO_GPIO_3 { + reg = <SC_R_GPIO_3>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio4: PD_LSIO_GPIO_4 { + reg = <SC_R_GPIO_4>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio5: PD_LSIO_GPIO_5{ + reg = <SC_R_GPIO_5>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio6: PD_LSIO_GPIO_6 { + reg = <SC_R_GPIO_6>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + pd_lsio_gpio7: PD_LSIO_GPIO_7 { + reg = <SC_R_GPIO_7>; + #power-domain-cells = <0>; + power-domains = <&pd_lsio>; + }; + }; + + pd_conn: PD_CONN { + compatible = "nxp,imx8-pd"; + reg = <SC_R_LAST>; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_conn_sdch0: PD_CONN_SDHC_0 { + reg = <SC_R_SDHC_0>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_sdch1: PD_CONN_SDHC_1 { + reg = <SC_R_SDHC_1>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + pd_conn_sdch2: PD_CONN_SDHC_2 { + reg = <SC_R_SDHC_2>; + #power-domain-cells = <0>; + power-domains = <&pd_conn>; + }; + }; + + pd_dma: PD_DMA { + compatible = "nxp,imx8-pd"; + reg = <SC_R_LAST>; + #power-domain-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pd_dma_lpi2c0: PD_DMA_I2C_0 { + reg = <SC_R_I2C_0>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpi2c1: PD_DMA_I2C_1 { + reg = <SC_R_I2C_1>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpi2c2:PD_DMA_I2C_2 { + reg = <SC_R_I2C_2>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpi2c3: PD_DMA_I2C_3 { + reg = <SC_R_I2C_3>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + }; + pd_dma_lpuart0: PD_DMA_UART0 { + reg = <SC_R_UART_0>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + wakeup-irq = <225>; + }; + }; + }; + + i2c0: i2c@5a800000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a800000 0x0 0x4000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QXP_I2C0_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX8QXP_I2C0_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c0>; + status = "disabled"; + }; + + i2c1: i2c@5a810000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a810000 0x0 0x4000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QXP_I2C1_CLK>, + <&clk IMX8QXP_I2C1_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QXP_I2C1_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c1>; + status = "disabled"; + }; + + i2c2: i2c@5a820000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a820000 0x0 0x4000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QXP_I2C2_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX8QXP_I2C2_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c2>; + status = "disabled"; + }; + + i2c3: i2c@5a830000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a830000 0x0 0x4000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QXP_I2C3_CLK>, + <&clk IMX8QXP_I2C3_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QXP_I2C3_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c3>; + status = "disabled"; + }; + + gpio0: gpio@5d080000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d080000 0x0 0x10000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + power-domains = <&pd_lsio_gpio0>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@5d090000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d090000 0x0 0x10000>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + power-domains = <&pd_lsio_gpio1>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@5d0a0000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0a0000 0x0 0x10000>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + power-domains = <&pd_lsio_gpio2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@5d0b0000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0b0000 0x0 0x10000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + power-domains = <&pd_lsio_gpio3>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@5d0c0000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0c0000 0x0 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + power-domains = <&pd_lsio_gpio4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@5d0d0000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0d0000 0x0 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + power-domains = <&pd_lsio_gpio5>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@5d0e0000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0e0000 0x0 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + power-domains = <&pd_lsio_gpio6>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@5d0f0000 { + compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; + reg = <0x0 0x5d0f0000 0x0 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + power-domains = <&pd_lsio_gpio7>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lpuart0: serial@5a060000 { + compatible = "fsl,imx8qm-lpuart"; + reg = <0x0 0x5a060000 0x0 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8QXP_UART0_CLK>, + <&clk IMX8QXP_UART0_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QXP_UART0_CLK>; + assigned-clock-rates = <80000000>; + power-domains = <&pd_dma_lpuart0>; + status = "disabled"; + }; + + usdhc1: usdhc@5b010000 { + compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x5b010000 0x0 0x10000>; + clocks = <&clk IMX8QXP_SDHC0_IPG_CLK>, + <&clk IMX8QXP_SDHC0_CLK>, + <&clk IMX8QXP_CLK_DUMMY>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX8QXP_SDHC0_SEL>, <&clk IMX8QXP_SDHC0_DIV>; + assigned-clock-parents = <&clk IMX8QXP_CONN_PLL0_CLK>; + assigned-clock-rates = <0>, <400000000>; + power-domains = <&pd_conn_sdch0>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc2: usdhc@5b020000 { + compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x5b020000 0x0 0x10000>; + clocks = <&clk IMX8QXP_SDHC1_IPG_CLK>, + <&clk IMX8QXP_SDHC1_CLK>, + <&clk IMX8QXP_CLK_DUMMY>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX8QXP_SDHC1_SEL>, <&clk IMX8QXP_SDHC1_DIV>; + assigned-clock-parents = <&clk IMX8QXP_CONN_PLL0_CLK>; + assigned-clock-rates = <0>, <200000000>; + power-domains = <&pd_conn_sdch1>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: usdhc@5b030000 { + compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc"; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x5b030000 0x0 0x10000>; + clocks = <&clk IMX8QXP_SDHC2_IPG_CLK>, + <&clk IMX8QXP_SDHC2_CLK>, + <&clk IMX8QXP_CLK_DUMMY>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX8QXP_SDHC2_SEL>, <&clk IMX8QXP_SDHC2_DIV>; + assigned-clock-parents = <&clk IMX8QXP_CONN_PLL0_CLK>; + assigned-clock-rates = <0>, <200000000>; + power-domains = <&pd_conn_sdch2>; + status = "disabled"; + }; +}; + +&A35_0 { + clocks = <&clk IMX8QXP_A35_DIV>; +}; + +/delete-node/ &A35_2; +/delete-node/ &A35_3; diff --git a/arch/arm/dts/fsl-imx8dxp.dtsi b/arch/arm/dts/fsl-imx8dxp.dtsi new file mode 100644 index 0000000000..cc688f4469 --- /dev/null +++ b/arch/arm/dts/fsl-imx8dxp.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +#include "fsl-imx8dx.dtsi" + +/ { + model = "Freescale i.MX8DXP"; + compatible = "fsl,imx8dxp", "fsl,imx8qxp"; +}; diff --git a/arch/arm/dts/fsl-imx8qxp.dtsi b/arch/arm/dts/fsl-imx8qxp.dtsi new file mode 100644 index 0000000000..1bffff1314 --- /dev/null +++ b/arch/arm/dts/fsl-imx8qxp.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "fsl-imx8dxp.dtsi" + +/ { + model = "Freescale i.MX8QXP"; + compatible = "fsl,imx8qxp"; + + cpus { + A35_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + }; + + pmu { + interrupt-affinity = <&A35_0>, <&A35_1>, <&A35_2>, <&A35_3>; + }; +}; + +&A35_2 { + device_type = "cpu"; +}; + +&A35_3 { + device_type = "cpu"; +};