Hello Wolfgang, i did read all your replies and didn't ignore them. I only folowed the by Atmel described way to compile u-boot and it didn't run so i contacted this u-boot-user mail list for further Information - what would you have done ? My Statement isn't wrong, in the desribed way it doesn't run. I recognize that Atmel modified the public Sources for their needs and that they only can give me further hints.

Thanks for your precius time Thomas

-----Ursprüngliche Nachricht----- Von: wd@denx.de [mailto:wd@denx.de] Gesendet: Mittwoch, 19. Juli 2006 13:24 An: Erdmann, Thomas Cc: u-boot-users@lists.sourceforge.net Betreff: Re: [U-Boot-Users] Start with u-boot on at91rm9200 on AT91RM9200-EK

In message <F6726C3E89A64840A5E10310E342A38F01BE93D0@xchback01.back.harti ng.intra> you wrote:

...

my Board doesn't have any Software, the Flash is empty and

so i start

...

from the internal ROM - clearly.

No, this is not so clear at all. You can for example just program the U-Boot image to flash using a JTAG debugger.

...

This is the Atmel described way to initialize a "new"

System or to do

...

an Up date.

As mentioned before: please conatact Atmel support with questions about or problems with the way Atmel recommends to do things.

Here we support the public U-Boot code only, not some vendor provided (and most probably obsolete) versions.

...

But with the original u-boot Sources 1.1.1 or 1.1.4 the generated u-boot.bin doesn't run, the Atmel delivered binary u-boot.bin does.

Your statement is wrong. The images run perfectly fine here both on a AT91RM9200-DK kit and on a couple of custom boards.

...

So i'm looking what to do with u-boot, so that it is

loadable like the Atmel one.

...

Who knows if there are any #defines to set (especially for this CPU/Platform) or where any Dokumentation for this can be found ?

Please READ the previous replies you got. I wonder why I take the time to answer your questions when you ignore my replies?

Wolfgang Denk

-- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Quote from the Boss after overriding the decision of a task force he created to find a solution: "I'm sorry if I ever gave you the impression your input would have any effect on my decision for the outcome of this project!"