CONFIG_SYS_TFTP_LOADADDR is defined on severals boards, but it's never used. So we can safely removed it.

Signed-off-by: Philippe Reynes tremyfr@yahoo.fr --- README | 3 --- include/configs/CRAYL1.h | 1 - include/configs/GEN860T.h | 5 ----- include/configs/TOP860.h | 1 - include/configs/ep8260.h | 1 - include/configs/utx8245.h | 1 - 6 files changed, 0 insertions(+), 12 deletions(-)

diff --git a/README b/README index dd250a0..eeb9e44 100644 --- a/README +++ b/README @@ -2819,9 +2819,6 @@ Configuration Settings: non page size aligned address and this could cause major problems.

-- CONFIG_SYS_TFTP_LOADADDR: - Default load address for network file downloads - - CONFIG_SYS_LOADS_BAUD_CHANGE: Enable temporary baudrate change while serial download

diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 1daec69..6bceccb 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -153,7 +153,6 @@

#define CONFIG_SYS_LOAD_ADDR 0x100000 /* where to load what we get from TFTP */ -#define CONFIG_SYS_TFTP_LOADADDR CONFIG_SYS_LOAD_ADDR #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CONFIG_SYS_DRAM_TEST 1

diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index b98cacc..9a649ca 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -96,11 +96,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE

/* - * Set default load address for tftp network downloads - */ -#define CONFIG_SYS_TFTP_LOADADDR 0x01000000 - -/* * Turn off the watchdog timer */ #undef CONFIG_WATCHDOG diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 36921ca..4849f94 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -416,7 +416,6 @@ #define CONFIG_IPADDR 10.0.4.111

#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_TFTP_LOADADDR 0x00100000

/* * For booting Linux, the board info and command line data diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index ccfe032..5a87cc5 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -371,7 +371,6 @@ #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */

#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_TFTP_LOADADDR 0x00100000 /* default load address for network file downloads */

#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index d203bb4..66568c8 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -65,7 +65,6 @@ #define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */ #define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */ #define CONFIG_SERVERIP 10.8.17.105 /* Spree */ -#define CONFIG_SYS_TFTP_LOADADDR 10000

#define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_addr=FFA00000\0" \